aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-01-21habanalabs: fix backward compatibility of idle checkOded Gabbay1-0/+2
Need to take the lower 32 bits of the driver's 64-bit idle mask and put it in the legacy 32-bit variable that the userspace reads to know the idle mask. Signed-off-by: Oded Gabbay <[email protected]>
2021-01-21habanalabs: zero pci counters packet before submit to FWOfir Bitton1-0/+5
Driver does not zero some pci counters packets before sending to FW. This causes an out of sync PI/CI between driver and FW. Signed-off-by: Ofir Bitton <[email protected]> Reviewed-by: Oded Gabbay <[email protected]> Signed-off-by: Oded Gabbay <[email protected]>
2021-01-21intel_th: pci: Add Alder Lake-P supportAlexander Shishkin1-0/+5
This adds support for the Trace Hub in Alder Lake-P. Signed-off-by: Alexander Shishkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-21stm class: Fix module init return on allocation failureWang Hui1-2/+4
In stm_heartbeat_init(): return value gets reset after the first iteration by stm_source_register_device(), so allocation failures after that will, after a clean up, return success. Fix that. Fixes: 119291853038 ("stm class: Add heartbeat stm source device") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wang Hui <[email protected]> Signed-off-by: Alexander Shishkin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-21driver core: Extend device_is_dependent()Rafael J. Wysocki1-1/+16
If the device passed as the target (second argument) to device_is_dependent() is not completely registered (that is, it has been initialized, but not added yet), but the parent pointer of it is set, it may be missing from the list of the parent's children and device_for_each_child() called by device_is_dependent() cannot be relied on to catch that dependency. For this reason, modify device_is_dependent() to check the ancestors of the target device by following its parent pointer in addition to the device_for_each_child() walk. Fixes: 9ed9895370ae ("driver core: Functional dependencies tracking support") Reported-by: Stephan Gerhold <[email protected]> Tested-by: Stephan Gerhold <[email protected]> Reviewed-by: Saravana Kannan <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]> Link: https://lore.kernel.org/r/17705994.d592GUb2YH@kreacher Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-21kernfs: wire up ->splice_read and ->splice_writeChristoph Hellwig1-0/+2
Wire up the splice_read and splice_write methods to the default helpers using ->read_iter and ->write_iter now that those are implemented for kernfs. This restores support to use splice and sendfile on kernfs files. Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Reported-by: Siddharth Gupta <[email protected]> Tested-by: Siddharth Gupta <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-21kernfs: implement ->write_iterChristoph Hellwig1-18/+10
Switch kernfs to implement the write_iter method instead of plain old write to prepare to supporting splice and sendfile again. Signed-off-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-21kernfs: implement ->read_iterChristoph Hellwig1-23/+12
Switch kernfs to implement the read_iter method instead of plain old read to prepare to supporting splice and sendfile again. Signed-off-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-21libceph: fix "Boolean result is used in bitwise operation" warningIlya Dryomov1-1/+1
This line dates back to 2013, but cppcheck complained because commit 2f713615ddd9 ("libceph: move msgr1 protocol implementation to its own file") moved it. Add parenthesis to silence the warning. Reported-by: kernel test robot <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2021-01-21drm/amdgpu: update mmhub mgcg&ls for mmhub_v2_3Aaron Liu1-23/+61
Starting from vangogh, the ATCL2 and DAGB0 registers relative to mgcg/ls has changed. For MGCG: Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL. For MGLS: Replace mmMM_ATC_L2_MISC_CG with mmMM_ATC_L2_CGTT_CLK_CTRL. Add DAGB0_(WR/RD)_CGTT_CLK_CTRL registers. Signed-off-by: Aaron Liu <[email protected]> Acked-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-21drm/amdgpu: modify GCR_GENERAL_CNTL for VangoghJinzhou Su1-1/+3
GCR_GENERAL_CNTL is defined differently in gc_10_1_0_offset.h and gc_10_3_0_offset.h. Update GCR_GENERAL_CNTL for Vangogh. Signed-off-by: Jinzhou Su <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-21drm/amdgpu/pm: no need GPU status set since ↵Prike Liang1-1/+1
mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL added in FSDL In the renoir there is no need GpuChangeState message set to exit gfxoff in the s0i3 resume since mmnbif_gpu_BIF_DOORBELL_FENCE_CNTL has been added in the s0i3 FSDL. Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-01-21drm/amd/display: Fixed corruptions on HPDRX link loss restoreVladimir Stempen1-2/+2
[why] Heavy corruption or blank screen reported on wake, with 6k display connected and FEC enabled [how] When Disable/Enable stream for display pipes on HPDRX, DC should take into account ODM split pipes. Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Vladimir Stempen <[email protected]> Reviewed-by: Aric Cyr <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-21drm/amd/display: Use hardware sequencer functions for PG controlNicholas Kazlauskas2-6/+21
[Why & How] These can differ per ASIC or not be present. Don't call the dcn20 ones directly but rather the ones defined by the ASIC init table. Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Reviewed-by: Eric Yang <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-21drm/amd/display: Change function decide_dp_link_settings to avoid infinite ↵Bing Guo1-0/+3
looping Why: Function decide_dp_link_settings() loops infinitely when required bandwidth can't be supported. How: Check the required bandwidth against verified_link_cap before trying to find a link setting for it. Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Bing Guo <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-21drm/amd/display: Allow PSTATE chnage when no displays are enabledAric Cyr1-2/+4
[Why] When no displays are currently enabled, display driver should not disallow PSTATE switching. [How] Allow PSTATE switching if either the active configuration supports it, or there are no active displays. Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Aric Cyr <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-21drm/amd/display: Update dram_clock_change_latency for DCN2.1Jake Wang1-1/+1
[WHY] dram clock change latencies get updated using ddr4 latency table, but that update does not happen before validation. This value should not be the default and should be number received from df for better mode support. This may cause a PState hang on high refresh panels with short vblanks such as on 1080p 360hz or 300hz panels. [HOW] Update latency from 23.84 to 11.72. Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Jake Wang <[email protected]> Reviewed-by: Sung Lee <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-01-21drm/amdgpu: remove gpu info firmware of green sardineHuang Rui1-1/+0
The ip discovery is supported on green sardine, it doesn't need gpu info firmware anymore. Signed-off-by: Huang Rui <[email protected]> Reviewed-by: Prike Liang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.10.x
2021-01-21drm/amd/display: DCN2X Find Secondary Pipe properly in MPO + ODM CaseSung Lee1-3/+4
[WHY] Previously as MPO + ODM Combine was not supported, finding secondary pipes for each case was mutually exclusive. Now that both are supported at the same time, both cases should be taken into account when finding a secondary pipe. [HOW] If a secondary pipe cannot be found based on previous bottom pipe, search for a second pipe using next_odm_pipe instead. Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Sung Lee <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.10.x
2021-01-21Merge branch 'printk-rework' into for-linusPetr Mladek2-12/+30
2021-01-21lightnvm: fix memory leak when submit failsPan Bian1-2/+1
The allocated page is not released if error occurs in nvm_submit_io_sync_raw(). __free_page() is moved ealier to avoid possible memory leak issue. Fixes: aff3fb18f957 ("lightnvm: move bad block and chunk state logic to core") Signed-off-by: Pan Bian <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2021-01-21Merge tag 'nvme-5.11-2020-01-21' of git://git.infradead.org/nvme into block-5.11Jens Axboe6-50/+129
Pull NVMe fixes from Christoph: "nvme fixes for 5.11: - fix a status code in nvmet (Chaitanya Kulkarni) - avoid double completions in nvme-rdma/nvme-tcp (Chao Leng) - fix the CMB support to cope with NVMe 1.4 controllers (Klaus Jensen) - fix PRINFO handling in the passthrough ioctl (Revanth Rajashekar) - fix a double DMA unmap in nvme-pci" * tag 'nvme-5.11-2020-01-21' of git://git.infradead.org/nvme: nvme-pci: fix error unwind in nvme_map_data nvme-pci: refactor nvme_unmap_data nvmet: set right status on error in id-ns handler nvme-pci: allow use of cmb on v1.4 controllers nvme-tcp: avoid request double completion for concurrent nvme_tcp_timeout nvme-rdma: avoid request double completion for concurrent nvme_rdma_timeout nvme: check the PRINFO bit before deciding the host buffer length
2021-01-21x86/mmx: Use KFPU_387 for MMX string operationsAndy Lutomirski1-5/+15
The default kernel_fpu_begin() doesn't work on systems that support XMM but haven't yet enabled CR4.OSFXSR. This causes crashes when _mmx_memcpy() is called too early because LDMXCSR generates #UD when the aforementioned bit is clear. Fix it by using kernel_fpu_begin_mask(KFPU_387) explicitly. Fixes: 7ad816762f9b ("x86/fpu: Reset MXCSR to default in kernel_fpu_begin()") Reported-by: Krzysztof Mazur <[email protected]> Signed-off-by: Andy Lutomirski <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Tested-by: Krzysztof Piotr Olędzki <[email protected]> Tested-by: Krzysztof Mazur <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/e7bf21855fe99e5f3baa27446e32623358f69e8d.1611205691.git.luto@kernel.org
2021-01-21x86/fpu: Add kernel_fpu_begin_mask() to selectively initialize stateAndy Lutomirski2-6/+18
Currently, requesting kernel FPU access doesn't distinguish which parts of the extended ("FPU") state are needed. This is nice for simplicity, but there are a few cases in which it's suboptimal: - The vast majority of in-kernel FPU users want XMM/YMM/ZMM state but do not use legacy 387 state. These users want MXCSR initialized but don't care about the FPU control word. Skipping FNINIT would save time. (Empirically, FNINIT is several times slower than LDMXCSR.) - Code that wants MMX doesn't want or need MXCSR initialized. _mmx_memcpy(), for example, can run before CR4.OSFXSR gets set, and initializing MXCSR will fail because LDMXCSR generates an #UD when the aforementioned CR4 bit is not set. - Any future in-kernel users of XFD (eXtended Feature Disable)-capable dynamic states will need special handling. Add a more specific API that allows callers to specify exactly what they want. Signed-off-by: Andy Lutomirski <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Tested-by: Krzysztof Piotr Olędzki <[email protected]> Link: https://lkml.kernel.org/r/aff1cac8b8fc7ee900cf73e8f2369966621b053f.1611205691.git.luto@kernel.org
2021-01-21Merge 9bb48c82aced ("tty: implement write_iter") into tty-linusGreg Kroah-Hartman1-22/+26
We want the single "splice/sendfile to a tty" regression fix into tty-linus so it can get into 5.11-final, while the larger patch series fixing "splice/sendfile from a tty" should wait for 5.12-rc1 so that we get more testing. Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-01-21mm/memblock: Fix typo in comment of memblock_phys_alloc_try_nid()Levi Yun1-1/+1
memblock_phys_alloc_try_nid function's comments has typo NUMA as MUMA. Correct this typo. Signed-off-by: Levi Yun <[email protected]> Reviewed-by: David Hildenbrand <[email protected]> Signed-off-by: Mike Rapoport <[email protected]>
2021-01-20tty: implement write_iterLinus Torvalds1-22/+26
This makes the tty layer use the .write_iter() function instead of the traditional .write() functionality. That allows writev(), but more importantly also makes it possible to enable .splice_write() for ttys, reinstating the "splice to tty" functionality that was lost in commit 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops"). Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Reported-by: Oliver Giles <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Al Viro <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-01-20mtd: rawnand: omap: Use BCH private fields in the specific OOB layoutMiquel Raynal1-6/+9
The OMAP driver may leverage software BCH logic to locate errors while using its own hardware to detect the presence of errors. This is achieved with a "mixed" mode which initializes manually the software BCH internal logic while providing its own OOB layout. The issue here comes from the fact that the BCH driver has been updated to only use generic NAND objects, and no longer depend on raw NAND structures as it is usable from SPI-NAND as well. However, at the end of the BCH context initialization, the driver checks the validity of the OOB layout. At this stage, the raw NAND fields have not been populated yet while being used by the layout helpers, leading to an invalid layout. The chosen solution here is to include the BCH structure definition and to refer to the BCH fields directly (de-referenced as a const pointer here) to know as early as possible the number of steps and ECC bytes which have been chosen. Note: I don't know which commit exactly triggered the error, but the entire migration to a generic BCH driver got merged in one go, so this should not be a problem for stable backports. Reported-by: Adam Ford <[email protected]> Fixes: 80fe603160a4 ("mtd: nand: ecc-bch: Stop using raw NAND structures") Signed-off-by: Miquel Raynal <[email protected]> Tested-by: Adam Ford <[email protected]> #logicpd-torpedo-37xx-devkit-28.dts Link: https://lore.kernel.org/linux-mtd/[email protected]
2021-01-20Merge tag 'for-5.11-rc4-tag' of ↵Linus Torvalds6-11/+29
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more one line fixes for various bugs, stable material. - fix send when emitting clone operation from the same file and root - fix double free on error when cleaning backrefs - lockdep fix during relocation - handle potential error during reloc when starting transaction - skip running delayed refs during commit (leftover from code removal in this dev cycle)" * tag 'for-5.11-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: don't clear ret in btrfs_start_dirty_block_groups btrfs: fix lockdep splat in btrfs_recover_relocation btrfs: do not double free backref nodes on error btrfs: don't get an EINTR during drop_snapshot for reloc btrfs: send: fix invalid clone operations when cloning from the same file and root btrfs: no need to run delayed refs after commit_fs_roots during commit
2021-01-20ALSA: usb-audio: Fix hw constraints dependenciesTakashi Iwai1-0/+3
Since the recent refactoring, it's been reported that some USB-audio devices (typically webcams) are no longer detected properly by PulseAudio. The debug session revealed that it's failing at probing by PA to try the sample rate 44.1kHz while the device has discrete sample rates other than 44.1kHz. But the puzzle was that arecord works as is, and some other devices with the discrete rates work, either. After all, this turned out to be the lack of the dependencies in a few hw constraint rules: snd_pcm_hw_rule_add() has the (variable) arguments specifying the dependent parameters, and some functions didn't set the target parameter itself as the dependencies. This resulted in an invalid parameter that could be generated only in a certain call pattern. This bug itself has been present in the code, but it didn't trigger errors just because the rules were casually avoiding such a corner case. After the recent refactoring and cleanup, however, the hw constraints work "as expected", and the problem surfaced now. For fixing the problem above, this patch adds the missing dependent parameters to each snd_pcm_hw_rule() call. Fixes: bc4e94aa8e72 ("ALSA: usb-audio: Handle discrete rates properly in hw constraints") BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=1181014 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-01-20Merge tag 'net-5.11-rc5' of ↵Linus Torvalds57-252/+380
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Networking fixes for 5.11-rc5, including fixes from bpf, wireless, and can trees. Current release - regressions: - nfc: nci: fix the wrong NCI_CORE_INIT parameters Current release - new code bugs: - bpf: allow empty module BTFs Previous releases - regressions: - bpf: fix signed_{sub,add32}_overflows type handling - tcp: do not mess with cloned skbs in tcp_add_backlog() - bpf: prevent double bpf_prog_put call from bpf_tracing_prog_attach - bpf: don't leak memory in bpf getsockopt when optlen == 0 - tcp: fix potential use-after-free due to double kfree() - mac80211: fix encryption issues with WEP - devlink: use right genl user_ptr when handling port param get/set - ipv6: set multicast flag on the multicast route - tcp: fix TCP_USER_TIMEOUT with zero window Previous releases - always broken: - bpf: local storage helpers should check nullness of owner ptr passed - mac80211: fix incorrect strlen of .write in debugfs - cls_flower: call nla_ok() before nla_next() - skbuff: back tiny skbs with kmalloc() in __netdev_alloc_skb() too" * tag 'net-5.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits) net: systemport: free dev before on error path net: usb: cdc_ncm: don't spew notifications net: mscc: ocelot: Fix multicast to the CPU port tcp: Fix potential use-after-free due to double kfree() bpf: Fix signed_{sub,add32}_overflows type handling can: peak_usb: fix use after free bugs can: vxcan: vxcan_xmit: fix use after free bug can: dev: can_restart: fix use after free bug tcp: fix TCP socket rehash stats mis-accounting net: dsa: b53: fix an off by one in checking "vlan->vid" tcp: do not mess with cloned skbs in tcp_add_backlog() selftests: net: fib_tests: remove duplicate log test net: nfc: nci: fix the wrong NCI_CORE_INIT parameters sh_eth: Fix power down vs. is_opened flag ordering net: Disable NETIF_F_HW_TLS_RX when RXCSUM is disabled netfilter: rpfilter: mask ecn bits before fib lookup udp: mask TOS bits in udp_v4_early_demux() xsk: Clear pool even for inactive queues bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback sh_eth: Make PHY access aware of Runtime PM to fix reboot crash ...
2021-01-20Merge tag 'for-linus-5.11-rc5-tag' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "A fix for build failure showing up in some configurations" * tag 'for-linus-5.11-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: x86/xen: fix 'nopvspin' build error
2021-01-20X.509: Fix crash caused by NULL pointerTianjia Zhang1-1/+2
On the following call path, `sig->pkey_algo` is not assigned in asymmetric_key_verify_signature(), which causes runtime crash in public_key_verify_signature(). keyctl_pkey_verify asymmetric_key_verify_signature verify_signature public_key_verify_signature This patch simply check this situation and fixes the crash caused by NULL pointer. Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification") Reported-by: Tobias Markus <[email protected]> Signed-off-by: Tianjia Zhang <[email protected]> Signed-off-by: David Howells <[email protected]> Reviewed-and-tested-by: Toke Høiland-Jørgensen <[email protected]> Tested-by: João Fonseca <[email protected]> Acked-by: Jarkko Sakkinen <[email protected]> Cc: [email protected] # v5.10+ Signed-off-by: Linus Torvalds <[email protected]>
2021-01-20cachefiles: Drop superfluous readpages aops NULL checkTakashi Iwai1-2/+0
After the recent actions to convert readpages aops to readahead, the NULL checks of readpages aops in cachefiles_read_or_alloc_page() may hit falsely. More badly, it's an ASSERT() call, and this panics. Drop the superfluous NULL checks for fixing this regression. [DH: Note that cachefiles never actually used readpages, so this check was never actually necessary] BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=208883 BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1175245 Fixes: 9ae326a69004 ("CacheFiles: A cache that backs onto a mounted filesystem") Signed-off-by: Takashi Iwai <[email protected]> Signed-off-by: David Howells <[email protected]> Acked-by: Matthew Wilcox (Oracle) <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2021-01-20ACPI: scan: Make acpi_bus_get_device() clear return pointer on errorHans de Goede1-0/+2
Set the acpi_device pointer which acpi_bus_get_device() returns-by- reference to NULL on errors. We've recently had 2 cases where callers of acpi_bus_get_device() did not properly error check the return value, so set the returned- by-reference acpi_device pointer to NULL, because at least some callers of acpi_bus_get_device() expect that to be done on errors. [ rjw: This issue was exposed by commit 71da201f38df ("ACPI: scan: Defer enumeration of devices with _DEP lists") which caused it to be much more likely to occur on some systems, but the real defect had been introduced by an earlier commit. ] Fixes: 40e7fcb19293 ("ACPI: Add _DEP support to fix battery issue on Asus T100TA") Fixes: bcfcd409d4db ("usb: split code locating ACPI companion into port and device") Reported-by: Pierre-Louis Bossart <[email protected]> Tested-by: Pierre-Louis Bossart <[email protected]> Diagnosed-by: Rafael J. Wysocki <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Cc: All applicable <[email protected]> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2021-01-20nvme-pci: fix error unwind in nvme_map_dataChristoph Hellwig1-10/+18
Properly unwind step by step using refactored helpers from nvme_unmap_data to avoid a potential double dma_unmap on a mapping failure. Fixes: 7fe07d14f71f ("nvme-pci: merge nvme_free_iod into nvme_unmap_data") Reported-by: Marc Orr <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Keith Busch <[email protected]> Reviewed-by: Marc Orr <[email protected]>
2021-01-20nvme-pci: refactor nvme_unmap_dataChristoph Hellwig1-28/+49
Split out three helpers from nvme_unmap_data that will allow finer grained unwinding from nvme_map_data. Signed-off-by: Christoph Hellwig <[email protected]> Reviewed-by: Keith Busch <[email protected]> Reviewed-by: Marc Orr <[email protected]>
2021-01-20Merge tag 'linux-can-fixes-for-5.11-20210120' of ↵Jakub Kicinski3-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== linux-can-fixes-for-5.11-20210120 All three patches are by Vincent Mailhol and fix a potential use after free bug in the CAN device infrastructure, the vxcan driver, and the peak_usk driver. In the TX-path the skb is used to read from after it was passed to the networking stack with netif_rx_ni(). * tag 'linux-can-fixes-for-5.11-20210120' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: can: peak_usb: fix use after free bugs can: vxcan: vxcan_xmit: fix use after free bug can: dev: can_restart: fix use after free bug ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-20net: systemport: free dev before on error pathPan Bian1-2/+4
On the error path, it should goto the error handling label to free allocated memory rather than directly return. Fixes: 31bc72d97656 ("net: systemport: fetch and use clock resources") Signed-off-by: Pan Bian <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-20net: usb: cdc_ncm: don't spew notificationsGrant Grundler2-1/+13
RTL8156 sends notifications about every 32ms. Only display/log notifications when something changes. This issue has been reported by others: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1832472 https://lkml.org/lkml/2020/8/27/1083 ... [785962.779840] usb 1-1: new high-speed USB device number 5 using xhci_hcd [785962.929944] usb 1-1: New USB device found, idVendor=0bda, idProduct=8156, bcdDevice=30.00 [785962.929949] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [785962.929952] usb 1-1: Product: USB 10/100/1G/2.5G LAN [785962.929954] usb 1-1: Manufacturer: Realtek [785962.929956] usb 1-1: SerialNumber: 000000001 [785962.991755] usbcore: registered new interface driver cdc_ether [785963.017068] cdc_ncm 1-1:2.0: MAC-Address: 00:24:27:88:08:15 [785963.017072] cdc_ncm 1-1:2.0: setting rx_max = 16384 [785963.017169] cdc_ncm 1-1:2.0: setting tx_max = 16384 [785963.017682] cdc_ncm 1-1:2.0 usb0: register 'cdc_ncm' at usb-0000:00:14.0-1, CDC NCM, 00:24:27:88:08:15 [785963.019211] usbcore: registered new interface driver cdc_ncm [785963.023856] usbcore: registered new interface driver cdc_wdm [785963.025461] usbcore: registered new interface driver cdc_mbim [785963.038824] cdc_ncm 1-1:2.0 enx002427880815: renamed from usb0 [785963.089586] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.121673] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected [785963.153682] cdc_ncm 1-1:2.0 enx002427880815: network connection: disconnected ... This is about 2KB per second and will overwrite all contents of a 1MB dmesg buffer in under 10 minutes rendering them useless for debugging many kernel problems. This is also an extra 180 MB/day in /var/logs (or 1GB per week) rendering the majority of those logs useless too. When the link is up (expected state), spew amount is >2x higher: ... [786139.600992] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.632997] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.665097] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.697100] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink [786139.729094] cdc_ncm 2-1:2.0 enx002427880815: network connection: connected [786139.761108] cdc_ncm 2-1:2.0 enx002427880815: 2500 mbit/s downlink 2500 mbit/s uplink ... Chrome OS cannot support RTL8156 until this is fixed. Signed-off-by: Grant Grundler <[email protected]> Reviewed-by: Hayes Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-20net: mscc: ocelot: Fix multicast to the CPU portAlban Bedel1-5/+18
Multicast entries in the MAC table use the high bits of the MAC address to encode the ports that should get the packets. But this port mask does not work for the CPU port, to receive these packets on the CPU port the MAC_CPU_COPY flag must be set. Because of this IPv6 was effectively not working because neighbor solicitations were never received. This was not apparent before commit 9403c158 (net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries) as the IPv6 entries were broken so all incoming IPv6 multicast was then treated as unknown and flooded on all ports. To fix this problem rework the ocelot_mact_learn() to set the MAC_CPU_COPY flag when a multicast entry that target the CPU port is added. For this we have to read back the ports endcoded in the pseudo MAC address by the caller. It is not a very nice design but that avoid changing the callers and should make backporting easier. Signed-off-by: Alban Bedel <[email protected]> Fixes: 9403c158b872 ("net: mscc: ocelot: support IPv4, IPv6 and plain Ethernet mdb entries") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-20tcp: Fix potential use-after-free due to double kfree()Kuniyuki Iwashima1-2/+2
Receiving ACK with a valid SYN cookie, cookie_v4_check() allocates struct request_sock and then can allocate inet_rsk(req)->ireq_opt. After that, tcp_v4_syn_recv_sock() allocates struct sock and copies ireq_opt to inet_sk(sk)->inet_opt. Normally, tcp_v4_syn_recv_sock() inserts the full socket into ehash and sets NULL to ireq_opt. Otherwise, tcp_v4_syn_recv_sock() has to reset inet_opt by NULL and free the full socket. The commit 01770a1661657 ("tcp: fix race condition when creating child sockets from syncookies") added a new path, in which more than one cores create full sockets for the same SYN cookie. Currently, the core which loses the race frees the full socket without resetting inet_opt, resulting in that both sock_put() and reqsk_put() call kfree() for the same memory: sock_put sk_free __sk_free sk_destruct __sk_destruct sk->sk_destruct/inet_sock_destruct kfree(rcu_dereference_protected(inet->inet_opt, 1)); reqsk_put reqsk_free __reqsk_free req->rsk_ops->destructor/tcp_v4_reqsk_destructor kfree(rcu_dereference_protected(inet_rsk(req)->ireq_opt, 1)); Calling kmalloc() between the double kfree() can lead to use-after-free, so this patch fixes it by setting NULL to inet_opt before sock_put(). As a side note, this kind of issue does not happen for IPv6. This is because tcp_v6_syn_recv_sock() clones both ipv6_opt and pktopts which correspond to ireq_opt in IPv4. Fixes: 01770a166165 ("tcp: fix race condition when creating child sockets from syncookies") CC: Ricardo Dias <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Benjamin Herrenschmidt <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-20Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski3-6/+6
Daniel Borkmann says: ==================== pull-request: bpf 2021-01-20 1) Fix wrong bpf_map_peek_elem_proto helper callback, from Mircea Cirjaliu. 2) Fix signed_{sub,add32}_overflows type truncation, from Daniel Borkmann. 3) Fix AF_XDP to also clear pools for inactive queues, from Maxim Mikityanskiy. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix signed_{sub,add32}_overflows type handling xsk: Clear pool even for inactive queues bpf: Fix helper bpf_map_peek_elem_proto pointing to wrong callback ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-01-20Merge branch 'md-fixes' of ↵Jens Axboe1-0/+2
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.11 Pull MD fix from Song. * 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: Set prev_flush_start and flush_bio in an atomic way
2021-01-20bpf: Fix signed_{sub,add32}_overflows type handlingDaniel Borkmann1-3/+3
Fix incorrect signed_{sub,add32}_overflows() input types (and a related buggy comment). It looks like this might have slipped in via copy/paste issue, also given prior to 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") the signature of signed_sub_overflows() had s64 a and s64 b as its input args whereas now they are truncated to s32. Thus restore proper types. Also, the case of signed_add32_overflows() is not consistent to signed_sub32_overflows(). Both have s32 as inputs, therefore align the former. Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: De4dCr0w <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]>
2021-01-20md: Set prev_flush_start and flush_bio in an atomic wayXiao Ni1-0/+2
One customer reports a crash problem which causes by flush request. It triggers a warning before crash. /* new request after previous flush is completed */ if (ktime_after(req_start, mddev->prev_flush_start)) { WARN_ON(mddev->flush_bio); mddev->flush_bio = bio; bio = NULL; } The WARN_ON is triggered. We use spin lock to protect prev_flush_start and flush_bio in md_flush_request. But there is no lock protection in md_submit_flush_data. It can set flush_bio to NULL first because of compiler reordering write instructions. For example, flush bio1 sets flush bio to NULL first in md_submit_flush_data. An interrupt or vmware causing an extended stall happen between updating flush_bio and prev_flush_start. Because flush_bio is NULL, flush bio2 can get the lock and submit to underlayer disks. Then flush bio1 updates prev_flush_start after the interrupt or extended stall. Then flush bio3 enters in md_flush_request. The start time req_start is behind prev_flush_start. The flush_bio is not NULL(flush bio2 hasn't finished). So it can trigger the WARN_ON now. Then it calls INIT_WORK again. INIT_WORK() will re-initialize the list pointers in the work_struct, which then can result in a corrupted work list and the work_struct queued a second time. With the work list corrupted, it can lead in invalid work items being used and cause a crash in process_one_work. We need to make sure only one flush bio can be handled at one same time. So add spin lock in md_submit_flush_data to protect prev_flush_start and flush_bio in an atomic way. Reviewed-by: David Jeffery <[email protected]> Signed-off-by: Xiao Ni <[email protected]> Signed-off-by: Song Liu <[email protected]>
2021-01-20can: peak_usb: fix use after free bugsVincent Mailhol1-4/+4
After calling peak_usb_netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the peak_usb_netif_rx_ni(). Reordering the lines solves the issue. Fixes: 0a25e1f4f185 ("can: peak_usb: add support for PEAK new CANFD USB adapters") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vincent Mailhol <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-01-20can: vxcan: vxcan_xmit: fix use after free bugVincent Mailhol1-2/+4
After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the canfd_frame cfd which aliases skb memory is accessed after the netif_rx_ni(). Fixes: a8f820a380a2 ("can: add Virtual CAN Tunnel driver (vxcan)") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vincent Mailhol <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-01-20can: dev: can_restart: fix use after free bugVincent Mailhol1-2/+2
After calling netif_rx_ni(skb), dereferencing skb is unsafe. Especially, the can_frame cf which aliases skb memory is accessed after the netif_rx_ni() in: stats->rx_bytes += cf->len; Reordering the lines solves the issue. Fixes: 39549eef3587 ("can: CAN Network device driver and Netlink interface") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vincent Mailhol <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2021-01-20drm/syncobj: Fix use-after-freeDaniel Vetter1-3/+5
While reviewing Christian's annotation patch I noticed that we have a user-after-free for the WAIT_FOR_SUBMIT case: We drop the syncobj reference before we've completed the waiting. Of course usually there's nothing bad happening here since userspace keeps the reference, but we can't rely on userspace to play nice here! Signed-off-by: Daniel Vetter <[email protected]> Fixes: bc9c80fe01a2 ("drm/syncobj: use the timeline point in drm_syncobj_find_fence v4") Reviewed-by: Christian König <[email protected]> Cc: Christian König <[email protected]> Cc: Lionel Landwerlin <[email protected]> Cc: Maarten Lankhorst <[email protected]> Cc: Maxime Ripard <[email protected]> Cc: Thomas Zimmermann <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: <[email protected]> # v5.2+ Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.