aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-02-07hv_netvsc: Allocate memory in netvsc_dma_map() with GFP_ATOMICMichael Kelley1-1/+1
Memory allocations in the network transmit path must use GFP_ATOMIC so they won't sleep. Reported-by: Paolo Abeni <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Fixes: 846da38de0e8 ("net: netvsc: Add Isolation VM support for netvsc driver") Cc: [email protected] Signed-off-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-02-07net/mlx5: Serialize module cleanup with reload and removeShay Drory1-7/+7
Currently, remove and reload flows can run in parallel to module cleanup. This design is error prone. For example: aux_drivers callbacks are called from both cleanup and remove flows with different lockings, which can cause a deadlock[1]. Hence, serialize module cleanup with reload and remove. [1] cleanup remove ------- ------ auxiliary_driver_unregister(); devl_lock() auxiliary_device_delete(mlx5e_aux) device_lock(mlx5e_aux) devl_lock() device_lock(mlx5e_aux) Fixes: 912cebf420c2 ("net/mlx5e: Connect ethernet part to auxiliary bus") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-07net/mlx5: fw_tracer, Zero consumer index when reloading the tracerShay Drory1-1/+1
When tracer is reloaded, the device will log the traces at the beginning of the log buffer. Also, driver is reading the log buffer in chunks in accordance to the consumer index. Hence, zero consumer index when reloading the tracer. Fixes: 4383cfcc65e7 ("net/mlx5: Add devlink reload") Signed-off-by: Shay Drory <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-07net/mlx5: fw_tracer, Clear load bit when freeing string DBs buffersShay Drory1-0/+1
Whenever the driver is reading the string DBs into buffers, the driver is setting the load bit, but the driver never clears this bit. As a result, in case load bit is on and the driver query the device for new string DBs, the driver won't read again the string DBs. Fix it by clearing the load bit when query the device for new string DBs. Fixes: 2d69356752ff ("net/mlx5: Add support for fw live patch event") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-07net/mlx5: Expose SF firmware pages counterMaher Sanalla3-1/+3
Currently, each core device has VF pages counter which stores number of fw pages used by its VFs and SFs. The current design led to a hang when performing firmware reset on DPU, where the DPU PFs stalled in sriov unload flow due to waiting on release of SFs pages instead of waiting on only VFs pages. Thus, Add a separate counter for SF firmware pages, which will prevent the stall scenario described above. Fixes: 1958fc2f0712 ("net/mlx5: SF, Add auxiliary device driver") Signed-off-by: Maher Sanalla <[email protected]> Reviewed-by: Shay Drory <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-07net/mlx5: Store page counters in a single arrayMaher Sanalla5-23/+34
Currently, an independent page counter is used for tracking memory usage for each function type such as VF, PF and host PF (DPU). For better code-readibilty, use a single array that stores the number of allocated memory pages for each function type. Signed-off-by: Maher Sanalla <[email protected]> Reviewed-by: Shay Drory <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-07net/mlx5e: IPoIB, Show unknown speed instead of errorDragos Tatulea1-8/+5
ethtool is returning an error for unknown speeds for the IPoIB interface: $ ethtool ib0 netlink error: failed to retrieve link settings netlink error: Invalid argument netlink error: failed to retrieve link settings netlink error: Invalid argument Settings for ib0: Link detected: no After this change, ethtool will return success and show "unknown speed": $ ethtool ib0 Settings for ib0: Supported ports: [ ] Supported link modes: Not reported Supported pause frame use: No Supports auto-negotiation: No Supported FEC modes: Not reported Advertised link modes: Not reported Advertised pause frame use: No Advertised auto-negotiation: No Advertised FEC modes: Not reported Speed: Unknown! Duplex: Full Auto-negotiation: off Port: Other PHYAD: 0 Transceiver: internal Link detected: no Fixes: eb234ee9d541 ("net/mlx5e: IPoIB, Add support for get_link_ksettings in ethtool") Signed-off-by: Dragos Tatulea <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-07net/mlx5e: Fix crash unsetting rx-vlan-filter in switchdev modeAmir Tzin2-1/+5
Moving to switchdev mode with rx-vlan-filter on and then setting it off causes the kernel to crash since fs->vlan is freed during nic profile cleanup flow. RX VLAN filtering is not supported in switchdev mode so unset it when changing to switchdev and restore its value when switching back to legacy. trace: [] RIP: 0010:mlx5e_disable_cvlan_filter+0x43/0x70 [] set_feature_cvlan_filter+0x37/0x40 [mlx5_core] [] mlx5e_handle_feature+0x3a/0x60 [mlx5_core] [] mlx5e_set_features+0x6d/0x160 [mlx5_core] [] __netdev_update_features+0x288/0xa70 [] ethnl_set_features+0x309/0x380 [] ? __nla_parse+0x21/0x30 [] genl_family_rcv_msg_doit.isra.17+0x110/0x150 [] genl_rcv_msg+0x112/0x260 [] ? features_reply_size+0xe0/0xe0 [] ? genl_family_rcv_msg_doit.isra.17+0x150/0x150 [] netlink_rcv_skb+0x4e/0x100 [] genl_rcv+0x24/0x40 [] netlink_unicast+0x1ab/0x290 [] netlink_sendmsg+0x257/0x4f0 [] sock_sendmsg+0x5c/0x70 Fixes: cb67b832921c ("net/mlx5e: Introduce SRIOV VF representors") Signed-off-by: Amir Tzin <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-07net/mlx5: Bridge, fix ageing of peer FDB entriesVlad Buslov2-5/+1
SWITCHDEV_FDB_ADD_TO_BRIDGE event handler that updates FDB entry 'lastuse' field is only executed for eswitch that owns the entry. However, if peer entry processed packets at least once it will have hardware counter 'used' value greater than entry 'lastuse' from that point on, which will cause FDB entry not being aged out. Process the event on all eswitch instances. Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-07net/mlx5: DR, Fix potential race in dr_rule_create_rule_nicYevgeny Kliteynik1-10/+15
Selecting builder should be protected by the lock to prevent the case where a new rule sets a builder in the nic_matcher while the previous rule is still using the nic_matcher. Fixing this issue and cleaning the error flow. Fixes: b9b81e1e9382 ("net/mlx5: DR, For short chains of STEs, avoid allocating ste_arr dynamically") Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-07net/mlx5e: Update rx ring hw mtu upon each rx-fcs flag changeAdham Faris1-71/+15
rq->hw_mtu is used in function en_rx.c/mlx5e_skb_from_cqe_mpwrq_linear() to catch oversized packets. If FCS is concatenated to the end of the packet then the check should be updated accordingly. Rx rings initialization (mlx5e_init_rxq_rq()) invoked for every new set of channels, as part of mlx5e_safe_switch_params(), unknowingly if it runs with default configuration or not. Current rq->hw_mtu initialization assumes default configuration and ignores params->scatter_fcs_en flag state. Fix this, by accounting for params->scatter_fcs_en flag state during rq->hw_mtu initialization. In addition, updating rq->hw_mtu value during ingress traffic might lead to packets drop and oversize_pkts_sw_drop counter increase with no good reason. Hence we remove this optimization and switch the set of channels with a new one, to make sure we don't get false positives on the oversize_pkts_sw_drop counter. Fixes: 102722fc6832 ("net/mlx5e: Add support for RXFCS feature flag") Signed-off-by: Adham Faris <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2023-02-07Merge tag 'devicetree-fixes-for-6.2-2' of ↵Linus Torvalds4-9/+31
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - Fix handling of multiple OF framebuffer devices - Fix booting on Socionext Synquacer with bad 'dma-ranges' entries - Add DT binding .yamllint to .gitignore * tag 'devicetree-fixes-for-6.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: interrupt-controller: arm,gic-v3: Fix typo in description of msi-controller property dt-bindings: Fix .gitignore of/address: Return an error when no valid dma-ranges are found of: Make OF framebuffer device names unique
2023-02-07cxl/region: Fix passthrough-decoder detectionDan Williams1-2/+2
A passthrough decoder is a decoder that maps only 1 target. It is a special case because it does not impose any constraints on the interleave-math as compared to a decoder with multiple targets. Extend the passthrough case to multi-target-capable decoders that only have one target selected. I.e. the current code was only considering passthrough *ports* which are only a subset of the potential passthrough decoder scenarios. Fixes: e4f6dfa9ef75 ("cxl/region: Fix 'distance' calculation with passthrough ports") Cc: <[email protected]> Reviewed-by: Dave Jiang <[email protected]> Link: https://lore.kernel.org/r/167564540422.847146.13816934143225777888.stgit@dwillia2-xfh.jf.intel.com Signed-off-by: Dan Williams <[email protected]>
2023-02-07Merge tag 'asoc-fix-v6.2-rc7' of ↵Takashi Iwai6-67/+117
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.2 A few more fixes for v6.2, all driver specific and small. It's larger than is ideal but we can't really control when people find problems.
2023-02-07ceph: flush cap releases when the session is flushedXiubo Li1-0/+6
MDS expects the completed cap release prior to responding to the session flush for cache drop. Cc: [email protected] Link: http://tracker.ceph.com/issues/38009 Signed-off-by: Xiubo Li <[email protected]> Reviewed-by: Venky Shankar <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2023-02-07Merge tag 'trace-v6.2-rc6' of ↵Linus Torvalds1-3/+0
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace Pull tracing fix from Steven Rostedt: "Fix regression in poll() and select() With the fix that made poll() and select() block if read would block caused a slight regression in rasdaemon, as it needed that kind of behavior. Add a way to make that behavior come back by writing zero into the 'buffer_percentage', which means to never block on read" * tag 'trace-v6.2-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix poll() and select() do not work on per_cpu trace_pipe and trace_pipe_raw
2023-02-07ASoC: topology: Return -ENOMEM on memory allocation failureAmadeusz Sławiński1-2/+6
When handling error path, ret needs to be set to correct value. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Fixes: d29d41e28eea ("ASoC: topology: Add support for multiple kcontrol types to a widget") Reviewed-by: Cezary Rojewski <[email protected]> Signed-off-by: Amadeusz Sławiński <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-02-07can: j1939: do not wait 250 ms if the same addr was already claimedDevid Antonio Filoni1-0/+40
The ISO 11783-5 standard, in "4.5.2 - Address claim requirements", states: d) No CF shall begin, or resume, transmission on the network until 250 ms after it has successfully claimed an address except when responding to a request for address-claimed. But "Figure 6" and "Figure 7" in "4.5.4.2 - Address-claim prioritization" show that the CF begins the transmission after 250 ms from the first AC (address-claimed) message even if it sends another AC message during that time window to resolve the address contention with another CF. As stated in "4.4.2.3 - Address-claimed message": In order to successfully claim an address, the CF sending an address claimed message shall not receive a contending claim from another CF for at least 250 ms. As stated in "4.4.3.2 - NAME management (NM) message": 1) A commanding CF can d) request that a CF with a specified NAME transmit the address- claimed message with its current NAME. 2) A target CF shall d) send an address-claimed message in response to a request for a matching NAME Taking the above arguments into account, the 250 ms wait is requested only during network initialization. Do not restart the timer on AC message if both the NAME and the address match and so if the address has already been claimed (timer has expired) or the AC message has been sent to resolve the contention with another CF (timer is still running). Signed-off-by: Devid Antonio Filoni <[email protected]> Acked-by: Oleksij Rempel <[email protected]> Link: https://lore.kernel.org/all/[email protected] Fixes: 9d71dd0c7009 ("can: add support of SAE J1939 protocol") Cc: [email protected] Signed-off-by: Marc Kleine-Budde <[email protected]>
2023-02-07ALSA: emux: Avoid potential array out-of-bound in snd_emux_xg_control()Artemii Karasev1-0/+3
snd_emux_xg_control() can be called with an argument 'param' greater than size of 'control' array. It may lead to accessing 'control' array at a wrong index. Found by Linux Verification Center (linuxtesting.org) with SVACE. Signed-off-by: Artemii Karasev <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-02-07devlink: change port event netdev notifier from per-net to globalJiri Pirko1-3/+6
Currently only the network namespace of devlink instance is monitored for port events. If netdev is moved to a different namespace and then unregistered, NETDEV_PRE_UNINIT is missed which leads to trigger following WARN_ON in devl_port_unregister(). WARN_ON(devlink_port->type != DEVLINK_PORT_TYPE_NOTSET); Fix this by changing the netdev notifier from per-net to global so no event is missed. Fixes: 02a68a47eade ("net: devlink: track netdev with devlink_port assigned") Signed-off-by: Jiri Pirko <[email protected]> Reviewed-by: Jacob Keller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-02-07ASoC: fsl_sai: fix getting version from VERIDShengjiu Wang1-0/+1
The version information is at the bit31 ~ bit16 in the VERID register, so need to right shift 16bit to get it, otherwise the result of comparison "sai->verid.version >= 0x0301" is wrong. Fixes: 99c1e74f25d4 ("ASoC: fsl_sai: store full version instead of major/minor") Signed-off-by: Shengjiu Wang <[email protected]> Reviewed-by: Iuliana Prodan <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-02-07selftests: ocelot: tc_flower_chains: make test_vlan_ingress_modify() more ↵Vladimir Oltean1-1/+1
comprehensive We have two IS1 filters of the OCELOT_VCAP_KEY_ANY key type (the one with "action vlan pop" and the one with "action vlan modify") and one of the OCELOT_VCAP_KEY_IPV4 key type (the one with "action skbedit priority"). But we have no IS1 filter with the OCELOT_VCAP_KEY_ETYPE key type, and there was an uncaught breakage there. To increase test coverage, convert one of the OCELOT_VCAP_KEY_ANY filters to OCELOT_VCAP_KEY_ETYPE, by making the filter also match on the MAC SA of the traffic sent by mausezahn, $h1_mac. Signed-off-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-02-07net: mscc: ocelot: fix VCAP filters not matching on MAC with "protocol 802.1Q"Vladimir Oltean1-12/+12
Alternative short title: don't instruct the hardware to match on EtherType with "protocol 802.1Q" flower filters. It doesn't work for the reasons detailed below. With a command such as the following: tc filter add dev $swp1 ingress chain $(IS1 2) pref 3 \ protocol 802.1Q flower skip_sw vlan_id 200 src_mac $h1_mac \ action vlan modify id 300 \ action goto chain $(IS2 0 0) the created filter is set by ocelot_flower_parse_key() to be of type OCELOT_VCAP_KEY_ETYPE, and etype is set to {value=0x8100, mask=0xffff}. This gets propagated all the way to is1_entry_set() which commits it to hardware (the VCAP_IS1_HK_ETYPE field of the key). Compare this to the case where src_mac isn't specified - the key type is OCELOT_VCAP_KEY_ANY, and is1_entry_set() doesn't populate VCAP_IS1_HK_ETYPE. The problem is that for VLAN-tagged frames, the hardware interprets the ETYPE field as holding the encapsulated VLAN protocol. So the above filter will only match those packets which have an encapsulated protocol of 0x8100, rather than all packets with VLAN ID 200 and the given src_mac. The reason why this is allowed to occur is because, although we have a block of code in ocelot_flower_parse_key() which sets "match_protocol" to false when VLAN keys are present, that code executes too late. There is another block of code, which executes for Ethernet addresses, and has a "goto finished_key_parsing" and skips the VLAN header parsing. By skipping it, "match_protocol" remains with the value it was initialized with, i.e. "true", and "proto" is set to f->common.protocol, or 0x8100. The concept of ignoring some keys rather than erroring out when they are present but can't be offloaded is dubious in itself, but is present since the initial commit fe3490e6107e ("net: mscc: ocelot: Hardware ofload for tc flower filter"), and it's outside of the scope of this patch to change that. The problem was introduced when the driver started to interpret the flower filter's protocol, and populate the VCAP filter's ETYPE field based on it. To fix this, it is sufficient to move the code that parses the VLAN keys earlier than the "goto finished_key_parsing" instruction. This will ensure that if we have a flower filter with both VLAN and Ethernet address keys, it won't match on ETYPE 0x8100, because the VLAN key parsing sets "match_protocol = false". Fixes: 86b956de119c ("net: mscc: ocelot: support matching on EtherType") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-02-07Revert "mm: Always release pages to the buddy allocator in ↵Aaron Thompson2-11/+1
memblock_free_late()." This reverts commit 115d9d77bb0f9152c60b6e8646369fa7f6167593. The pages being freed by memblock_free_late() have already been initialized, but if they are in the deferred init range, __free_one_page() might access nearby uninitialized pages when trying to coalesce buddies. This can, for example, trigger this BUG: BUG: unable to handle page fault for address: ffffe964c02580c8 RIP: 0010:__list_del_entry_valid+0x3f/0x70 <TASK> __free_one_page+0x139/0x410 __free_pages_ok+0x21d/0x450 memblock_free_late+0x8c/0xb9 efi_free_boot_services+0x16b/0x25c efi_enter_virtual_mode+0x403/0x446 start_kernel+0x678/0x714 secondary_startup_64_no_verify+0xd2/0xdb </TASK> A proper fix will be more involved so revert this change for the time being. Fixes: 115d9d77bb0f ("mm: Always release pages to the buddy allocator in memblock_free_late().") Signed-off-by: Aaron Thompson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mike Rapoport (IBM) <[email protected]>
2023-02-07net: dsa: mt7530: don't change PVC_EG_TAG when CPU port becomes VLAN-awareVladimir Oltean1-7/+19
Frank reports that in a mt7530 setup where some ports are standalone and some are in a VLAN-aware bridge, 8021q uppers of the standalone ports lose their VLAN tag on xmit, as seen by the link partner. This seems to occur because once the other ports join the VLAN-aware bridge, mt7530_port_vlan_filtering() also calls mt7530_port_set_vlan_aware(ds, cpu_dp->index), and this affects the way that the switch processes the traffic of the standalone port. Relevant is the PVC_EG_TAG bit. The MT7530 documentation says about it: EG_TAG: Incoming Port Egress Tag VLAN Attribution 0: disabled (system default) 1: consistent (keep the original ingress tag attribute) My interpretation is that this setting applies on the ingress port, and "disabled" is basically the normal behavior, where the egress tag format of the packet (tagged or untagged) is decided by the VLAN table (MT7530_VLAN_EGRESS_UNTAG or MT7530_VLAN_EGRESS_TAG). But there is also an option of overriding the system default behavior, and for the egress tagging format of packets to be decided not by the VLAN table, but simply by copying the ingress tag format (if ingress was tagged, egress is tagged; if ingress was untagged, egress is untagged; aka "consistent). This is useful in 2 scenarios: - VLAN-unaware bridge ports will always encounter a miss in the VLAN table. They should forward a packet as-is, though. So we use "consistent" there. See commit e045124e9399 ("net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode"). - Traffic injected from the CPU port. The operating system is in god mode; if it wants a packet to exit as VLAN-tagged, it sends it as VLAN-tagged. Otherwise it sends it as VLAN-untagged*. *This is true only if we don't consider the bridge TX forwarding offload feature, which mt7530 doesn't support. So for now, make the CPU port always stay in "consistent" mode to allow software VLANs to be forwarded to their egress ports with the VLAN tag intact, and not stripped. Link: https://lore.kernel.org/netdev/trinity-e6294d28-636c-4c40-bb8b-b523521b00be-1674233135062@3c-app-gmx-bs36/ Fixes: e045124e9399 ("net: dsa: mt7530: fix tagged frames pass-through in VLAN-unaware mode") Reported-by: Frank Wunderlich <[email protected]> Tested-by: Frank Wunderlich <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Tested-by: Arınç ÜNAL <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-02-07RDMA/rtrs: Don't call kobject_del for srv_path->kobjLi Zhijian1-2/+1
As the mention in commmit f7452a7e96c1 ("RDMA/rtrs-srv: fix memory leak by missing kobject free"), it was intended to remove the kobject_del for srv_path->kobj. f7452a7e96c1 said: >This patch moves kobject_del() into free_sess() so that the kobject of > rtrs_srv_sess can be freed. This patch also move rtrs_srv_destroy_once_sysfs_root_folders back to 'if (srv_path->kobj.state_in_sysfs)' block to avoid a 'held lock freed!' A kernel panic will be triggered by following script ----------------------- $ while true do echo "sessname=foo path=ip:<ip address> device_path=/dev/nvme0n1" > /sys/devices/virtual/rnbd-client/ctl/map_device echo "normal" > /sys/block/rnbd0/rnbd/unmap_device done ----------------------- The bisection pointed to commit 6af4609c18b3 ("RDMA/rtrs-srv: Fix several issues in rtrs_srv_destroy_path_files") at last. rnbd_server L777: </dev/nvme0n1@foo>: Opened device 'nvme0n1' general protection fault, probably for non-canonical address 0x765f766564753aea: 0000 [#1] PREEMPT SMP PTI CPU: 0 PID: 3558 Comm: systemd-udevd Kdump: loaded Not tainted 6.1.0-rc3-roce-flush+ #51 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:kernfs_dop_revalidate+0x36/0x180 Code: 00 00 41 55 41 54 55 53 48 8b 47 68 48 89 fb 48 85 c0 0f 84 db 00 00 00 48 8b a8 60 04 00 00 48 8b 45 30 48 85 c0 48 0f 44 c5 <4c> 8b 60 78 49 81 c4 d8 00 00 00 4c 89 e7 e8 b7 78 7b 00 8b 05 3d RSP: 0018:ffffaf1700b67c78 EFLAGS: 00010206 RAX: 765f766564753a72 RBX: ffff89e2830849c0 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff89e2830849c0 RBP: ffff89e280361bd0 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000065 R11: 0000000000000000 R12: ffff89e2830849c0 R13: ffff89e283084888 R14: d0d0d0d0d0d0d0d0 R15: 2f2f2f2f2f2f2f2f FS: 00007f13fbce7b40(0000) GS:ffff89e2bbc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f93e055d340 CR3: 0000000104664002 CR4: 00000000001706f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> lookup_fast+0x7b/0x100 walk_component+0x21/0x160 link_path_walk.part.0+0x24d/0x390 path_openat+0xad/0x9a0 do_filp_open+0xa9/0x150 ? lock_release+0x13c/0x2e0 ? _raw_spin_unlock+0x29/0x50 ? alloc_fd+0x124/0x1f0 do_sys_openat2+0x9b/0x160 __x64_sys_openat+0x54/0xa0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f13fc9d701b Code: 25 00 00 41 00 3d 00 00 41 00 74 4b 64 8b 04 25 18 00 00 00 85 c0 75 67 44 89 e2 48 89 ee bf 9c ff ff ff b8 01 01 00 00 0f 05 <48> 3d 00 f0 ff ff 0f 87 91 00 00 00 48 8b 54 24 28 64 48 2b 14 25 RSP: 002b:00007ffddf242640 EFLAGS: 00000246 ORIG_RAX: 0000000000000101 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f13fc9d701b RDX: 0000000000080000 RSI: 00007ffddf2427c0 RDI: 00000000ffffff9c RBP: 00007ffddf2427c0 R08: 00007f13fcc5b440 R09: 21b2131aa64b1ef2 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000080000 R13: 00007ffddf2427c0 R14: 000055ed13be8db0 R15: 0000000000000000 Fixes: 6af4609c18b3 ("RDMA/rtrs-srv: Fix several issues in rtrs_srv_destroy_path_files") Acked-by: Guoqing Jiang <[email protected]> Signed-off-by: Li Zhijian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Jack Wang <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]>
2023-02-07ALSA: hda/realtek: fix mute/micmute LEDs don't work for a HP platform.Andy Chi1-0/+5
There is a HP platform needs ALC236_FIXUP_HP_GPIO_LED quirk to make mic-mute/audio-mute working. Signed-off-by: Andy Chi <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-02-07pinctrl: intel: Restore the pins that used to be in Direct IRQ modeAndy Shevchenko1-3/+13
If the firmware mangled the register contents too much, check the saved value for the Direct IRQ mode. If it matches, we will restore the pin state. Reported-by: Jim Minter <[email protected]> Fixes: 6989ea4881c8 ("pinctrl: intel: Save and restore pins in "direct IRQ" mode") Tested-by: Jim Minter <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Acked-by: Mika Westerberg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2023-02-07drm/client: fix circular reference counting issueChristian König2-18/+20
We reference dump buffers both by their handle as well as their object. The problem is now that when anybody iterates over the DRM framebuffers and exports the underlying GEM objects through DMA-buf we run into a circular reference count situation. The result is that the fbdev handling holds the GEM handle preventing the DMA-buf in the GEM object to be released. This DMA-buf in turn holds a reference to the driver module which on unload would release the fbdev. Break that loop by releasing the handle as soon as the DRM framebuffer object is created. The DRM framebuffer and the DRM client buffer structure still hold a reference to the underlying GEM object preventing its destruction. Signed-off-by: Christian König <[email protected]> Fixes: c76f0f7cb546 ("drm: Begin an API for in-kernel clients") Cc: <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Tested-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-02-06cifs: Fix use-after-free in rdata->read_into_pages()ZhaoLong Wang1-2/+2
When the network status is unstable, use-after-free may occur when read data from the server. BUG: KASAN: use-after-free in readpages_fill_pages+0x14c/0x7e0 Call Trace: <TASK> dump_stack_lvl+0x38/0x4c print_report+0x16f/0x4a6 kasan_report+0xb7/0x130 readpages_fill_pages+0x14c/0x7e0 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 </TASK> Allocated by task 2535: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 __kasan_kmalloc+0x82/0x90 cifs_readdata_direct_alloc+0x2c/0x110 cifs_readdata_alloc+0x2d/0x60 cifs_readahead+0x393/0xfe0 read_pages+0x12f/0x470 page_cache_ra_unbounded+0x1b1/0x240 filemap_get_pages+0x1c8/0x9a0 filemap_read+0x1c0/0x540 cifs_strict_readv+0x21b/0x240 vfs_read+0x395/0x4b0 ksys_read+0xb8/0x150 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc Freed by task 79: kasan_save_stack+0x22/0x50 kasan_set_track+0x25/0x30 kasan_save_free_info+0x2e/0x50 __kasan_slab_free+0x10e/0x1a0 __kmem_cache_free+0x7a/0x1a0 cifs_readdata_release+0x49/0x60 process_one_work+0x46c/0x760 worker_thread+0x2a4/0x6f0 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 Last potentially related work creation: kasan_save_stack+0x22/0x50 __kasan_record_aux_stack+0x95/0xb0 insert_work+0x2b/0x130 __queue_work+0x1fe/0x660 queue_work_on+0x4b/0x60 smb2_readv_callback+0x396/0x800 cifs_abort_connection+0x474/0x6a0 cifs_reconnect+0x5cb/0xa50 cifs_readv_from_socket.cold+0x22/0x6c cifs_read_page_from_socket+0xc1/0x100 readpages_fill_pages.cold+0x2f/0x46 cifs_readv_receive+0x46d/0xa40 cifs_demultiplex_thread+0x121c/0x1490 kthread+0x16b/0x1a0 ret_from_fork+0x2c/0x50 The following function calls will cause UAF of the rdata pointer. readpages_fill_pages cifs_read_page_from_socket cifs_readv_from_socket cifs_reconnect __cifs_reconnect cifs_abort_connection mid->callback() --> smb2_readv_callback queue_work(&rdata->work) # if the worker completes first, # the rdata is freed cifs_readv_complete kref_put cifs_readdata_release kfree(rdata) return rdata->... # UAF in readpages_fill_pages() Similarly, this problem also occurs in the uncache_fill_pages(). Fix this by adjusts the order of condition judgment in the return statement. Signed-off-by: ZhaoLong Wang <[email protected]> Cc: [email protected] Acked-by: Paulo Alcantara (SUSE) <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-02-06cxl/region: Fix null pointer dereference for resetting decoderFan Ni1-3/+5
Not all decoders have a reset callback. The CXL specification allows a host bridge with a single root port to have no explicit HDM decoders. Currently the region driver assumes there are none. As such the CXL core creates a special pass through decoder instance without a commit/reset callback. Prior to this patch, the ->reset() callback was called unconditionally when calling cxl_region_decode_reset. Thus a configuration with 1 Host Bridge, 1 Root Port, and one directly attached CXL type 3 device or multiple CXL type 3 devices attached to downstream ports of a switch can cause a null pointer dereference. Before the fix, a kernel crash was observed when we destroy the region, and a pass through decoder is reset. The issue can be reproduced as below, 1) create a region with a CXL setup which includes a HB with a single root port under which a memdev is attached directly. 2) destroy the region with cxl destroy-region regionX -f. Fixes: 176baefb2eb5 ("cxl/hdm: Commit decoder state to hardware") Cc: <[email protected]> Signed-off-by: Fan Ni <[email protected]> Reviewed-by: Davidlohr Bueso <[email protected]> Reviewed-by: Dave Jiang <[email protected]> Reviewed-by: Jonathan Cameron <[email protected]> Tested-by: Gregory Price <[email protected]> Reviewed-by: Gregory Price <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dan Williams <[email protected]>
2023-02-07powerpc/64s/interrupt: Fix interrupt exit race with security mitigation switchNicholas Piggin1-2/+4
The RFI and STF security mitigation options can flip the interrupt_exit_not_reentrant static branch condition concurrently with the interrupt exit code which tests that branch. Interrupt exit tests this condition to set MSR[EE|RI] for exit, then again in the case a soft-masked interrupt is found pending, to recover the MSR so the interrupt can be replayed before attempting to exit again. If the condition changes between these two tests, the MSR and irq soft-mask state will become corrupted, leading to warnings and possible crashes. For example, if the branch is initially true then false, MSR[EE] will be 0 but PACA_IRQ_HARD_DIS clear and EE may not get enabled, leading to warnings in irq_64.c. Fixes: 13799748b957 ("powerpc/64: use interrupt restart table to speed up return from interrupt") Cc: [email protected] # v5.14+ Reported-by: Sachin Sant <[email protected]> Tested-by: Sachin Sant <[email protected]> Signed-off-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-02-06ice: switch: fix potential memleak in ice_add_adv_recipe()Zhang Changzhong1-1/+1
When ice_add_special_words() fails, the 'rm' is not released, which will lead to a memory leak. Fix this up by going to 'err_unroll' label. Compile tested only. Fixes: 8b032a55c1bd ("ice: low level support for tunnels") Signed-off-by: Zhang Changzhong <[email protected]> Tested-by: Sujai Buvaneswaran <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]>
2023-02-06ice: Fix off by one in ice_tc_forward_to_queue()Dan Carpenter1-1/+1
The > comparison should be >= to prevent reading one element beyond the end of the array. The "vsi->num_rxq" is not strictly speaking the number of elements in the vsi->rxq_map[] array. The array has "vsi->alloc_rxq" elements and "vsi->num_rxq" is less than or equal to the number of elements in the array. The array is allocated in ice_vsi_alloc_arrays(). It's still an off by one but it might not access outside the end of the array. Fixes: 143b86f346c7 ("ice: Enable RX queue selection using skbedit action") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Amritha Nambiar <[email protected]> Tested-by: Bharathi Sreenivas <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]>
2023-02-06ice: Fix disabling Rx VLAN filtering with port VLAN enabledBrett Creeley1-1/+15
If the user turns on the vf-true-promiscuous-support flag, then Rx VLAN filtering will be disabled if the VF requests to enable promiscuous mode. When the VF is in a port VLAN, this is the incorrect behavior because it will allow the VF to receive traffic outside of its port VLAN domain. Fortunately this only resulted in the VF(s) receiving broadcast traffic outside of the VLAN domain because all of the VLAN promiscuous rules are based on the port VLAN ID. Fix this by setting the .disable_rx_filtering VLAN op to a no-op when a port VLAN is enabled on the VF. Also, make sure to make this fix for both Single VLAN Mode and Double VLAN Mode enabled devices. Fixes: c31af68a1b94 ("ice: Add outer_vlan_ops and VSI specific VLAN ops implementations") Signed-off-by: Brett Creeley <[email protected]> Signed-off-by: Karen Ostrowska <[email protected]> Tested-by: Marek Szlosek <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-02-06ice: fix out-of-bounds KASAN warning in virtchnlMichal Swiatkowski2-18/+12
KASAN reported: [ 9793.708867] BUG: KASAN: global-out-of-bounds in ice_get_link_speed+0x16/0x30 [ice] [ 9793.709205] Read of size 4 at addr ffffffffc1271b1c by task kworker/6:1/402 [ 9793.709222] CPU: 6 PID: 402 Comm: kworker/6:1 Kdump: loaded Tainted: G B OE 6.1.0+ #3 [ 9793.709235] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.00.01.0014.070920180847 07/09/2018 [ 9793.709245] Workqueue: ice ice_service_task [ice] [ 9793.709575] Call Trace: [ 9793.709582] <TASK> [ 9793.709588] dump_stack_lvl+0x44/0x5c [ 9793.709613] print_report+0x17f/0x47b [ 9793.709632] ? __cpuidle_text_end+0x5/0x5 [ 9793.709653] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.709986] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.710317] kasan_report+0xb7/0x140 [ 9793.710335] ? ice_get_link_speed+0x16/0x30 [ice] [ 9793.710673] ice_get_link_speed+0x16/0x30 [ice] [ 9793.711006] ice_vc_notify_vf_link_state+0x14c/0x160 [ice] [ 9793.711351] ? ice_vc_repr_cfg_promiscuous_mode+0x120/0x120 [ice] [ 9793.711698] ice_vc_process_vf_msg+0x7a7/0xc00 [ice] [ 9793.712074] __ice_clean_ctrlq+0x98f/0xd20 [ice] [ 9793.712534] ? ice_bridge_setlink+0x410/0x410 [ice] [ 9793.712979] ? __request_module+0x320/0x520 [ 9793.713014] ? ice_process_vflr_event+0x27/0x130 [ice] [ 9793.713489] ice_service_task+0x11cf/0x1950 [ice] [ 9793.713948] ? io_schedule_timeout+0xb0/0xb0 [ 9793.713972] process_one_work+0x3d0/0x6a0 [ 9793.714003] worker_thread+0x8a/0x610 [ 9793.714031] ? process_one_work+0x6a0/0x6a0 [ 9793.714049] kthread+0x164/0x1a0 [ 9793.714071] ? kthread_complete_and_exit+0x20/0x20 [ 9793.714100] ret_from_fork+0x1f/0x30 [ 9793.714137] </TASK> [ 9793.714151] The buggy address belongs to the variable: [ 9793.714158] ice_aq_to_link_speed+0x3c/0xffffffffffff3520 [ice] [ 9793.714632] Memory state around the buggy address: [ 9793.714642] ffffffffc1271a00: f9 f9 f9 f9 00 00 05 f9 f9 f9 f9 f9 00 00 02 f9 [ 9793.714656] ffffffffc1271a80: f9 f9 f9 f9 00 00 04 f9 f9 f9 f9 f9 00 00 00 00 [ 9793.714670] >ffffffffc1271b00: 00 00 00 04 f9 f9 f9 f9 04 f9 f9 f9 f9 f9 f9 f9 [ 9793.714680] ^ [ 9793.714690] ffffffffc1271b80: 00 00 00 00 00 04 f9 f9 f9 f9 f9 f9 00 00 00 00 [ 9793.714704] ffffffffc1271c00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 The ICE_AQ_LINK_SPEED_UNKNOWN define is BIT(15). The value is bigger than both legacy and normal link speed tables. Add one element (0 - unknown) to both tables. There is no need to explicitly set table size, leave it empty. Fixes: 1d0e28a9be1f ("ice: Remove and replace ice speed defines with ethtool.h versions") Signed-off-by: Michal Swiatkowski <[email protected]> Reviewed-by: Alexander Lobakin <[email protected]> Tested-by: Gurucharan G <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]>
2023-02-06ice: Do not use WQ_MEM_RECLAIM flag for workqueueAnirudh Venkataramanan1-1/+1
When both ice and the irdma driver are loaded, a warning in check_flush_dependency is being triggered. This is due to ice driver workqueue being allocated with the WQ_MEM_RECLAIM flag and the irdma one is not. According to kernel documentation, this flag should be set if the workqueue will be involved in the kernel's memory reclamation flow. Since it is not, there is no need for the ice driver's WQ to have this flag set so remove it. Example trace: [ +0.000004] workqueue: WQ_MEM_RECLAIM ice:ice_service_task [ice] is flushing !WQ_MEM_RECLAIM infiniband:0x0 [ +0.000139] WARNING: CPU: 0 PID: 728 at kernel/workqueue.c:2632 check_flush_dependency+0x178/0x1a0 [ +0.000011] Modules linked in: bonding tls xt_CHECKSUM xt_MASQUERADE xt_conntrack ipt_REJECT nf_reject_ipv4 nft_compat nft_cha in_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nf_tables nfnetlink bridge stp llc rfkill vfat fat intel_rapl_msr intel _rapl_common isst_if_common skx_edac nfit libnvdimm x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct1 0dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_ core_mod ib_iser libiscsi scsi_transport_iscsi rdma_cm ib_cm iw_cm iTCO_wdt iTCO_vendor_support ipmi_ssif irdma mei_me ib_uverbs ib_core intel_uncore joydev pcspkr i2c_i801 acpi_ipmi mei lpc_ich i2c_smbus intel_pch_thermal ioatdma ipmi_si acpi_power_meter acpi_pad xfs libcrc32c sd_mod t10_pi crc64_rocksoft crc64 sg ahci ixgbe libahci ice i40e igb crc32c_intel mdio i2c_algo_bit liba ta dca wmi dm_mirror dm_region_hash dm_log dm_mod ipmi_devintf ipmi_msghandler fuse [ +0.000161] [last unloaded: bonding] [ +0.000006] CPU: 0 PID: 728 Comm: kworker/0:2 Tainted: G S 6.2.0-rc2_next-queue-13jan-00458-gc20aabd57164 #1 [ +0.000006] Hardware name: Intel Corporation S2600WFT/S2600WFT, BIOS SE5C620.86B.02.01.0010.010620200716 01/06/2020 [ +0.000003] Workqueue: ice ice_service_task [ice] [ +0.000127] RIP: 0010:check_flush_dependency+0x178/0x1a0 [ +0.000005] Code: 89 8e 02 01 e8 49 3d 40 00 49 8b 55 18 48 8d 8d d0 00 00 00 48 8d b3 d0 00 00 00 4d 89 e0 48 c7 c7 e0 3b 08 9f e8 bb d3 07 01 <0f> 0b e9 be fe ff ff 80 3d 24 89 8e 02 00 0f 85 6b ff ff ff e9 06 [ +0.000004] RSP: 0018:ffff88810a39f990 EFLAGS: 00010282 [ +0.000005] RAX: 0000000000000000 RBX: ffff888141bc2400 RCX: 0000000000000000 [ +0.000004] RDX: 0000000000000001 RSI: dffffc0000000000 RDI: ffffffffa1213a80 [ +0.000003] RBP: ffff888194bf3400 R08: ffffed117b306112 R09: ffffed117b306112 [ +0.000003] R10: ffff888bd983088b R11: ffffed117b306111 R12: 0000000000000000 [ +0.000003] R13: ffff888111f84d00 R14: ffff88810a3943ac R15: ffff888194bf3400 [ +0.000004] FS: 0000000000000000(0000) GS:ffff888bd9800000(0000) knlGS:0000000000000000 [ +0.000003] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ +0.000003] CR2: 000056035b208b60 CR3: 000000017795e005 CR4: 00000000007706f0 [ +0.000003] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ +0.000003] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ +0.000002] PKRU: 55555554 [ +0.000003] Call Trace: [ +0.000002] <TASK> [ +0.000003] __flush_workqueue+0x203/0x840 [ +0.000006] ? mutex_unlock+0x84/0xd0 [ +0.000008] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? __pfx___flush_workqueue+0x10/0x10 [ +0.000006] ? mutex_lock+0xa3/0xf0 [ +0.000005] ib_cache_cleanup_one+0x39/0x190 [ib_core] [ +0.000174] __ib_unregister_device+0x84/0xf0 [ib_core] [ +0.000094] ib_unregister_device+0x25/0x30 [ib_core] [ +0.000093] irdma_ib_unregister_device+0x97/0xc0 [irdma] [ +0.000064] ? __pfx_irdma_ib_unregister_device+0x10/0x10 [irdma] [ +0.000059] ? up_write+0x5c/0x90 [ +0.000005] irdma_remove+0x36/0x90 [irdma] [ +0.000062] auxiliary_bus_remove+0x32/0x50 [ +0.000007] device_release_driver_internal+0xfa/0x1c0 [ +0.000005] bus_remove_device+0x18a/0x260 [ +0.000007] device_del+0x2e5/0x650 [ +0.000005] ? __pfx_device_del+0x10/0x10 [ +0.000003] ? mutex_unlock+0x84/0xd0 [ +0.000004] ? __pfx_mutex_unlock+0x10/0x10 [ +0.000004] ? _raw_spin_unlock+0x18/0x40 [ +0.000005] ice_unplug_aux_dev+0x52/0x70 [ice] [ +0.000160] ice_service_task+0x1309/0x14f0 [ice] [ +0.000134] ? __pfx___schedule+0x10/0x10 [ +0.000006] process_one_work+0x3b1/0x6c0 [ +0.000008] worker_thread+0x69/0x670 [ +0.000005] ? __kthread_parkme+0xec/0x110 [ +0.000007] ? __pfx_worker_thread+0x10/0x10 [ +0.000005] kthread+0x17f/0x1b0 [ +0.000005] ? __pfx_kthread+0x10/0x10 [ +0.000004] ret_from_fork+0x29/0x50 [ +0.000009] </TASK> Fixes: 940b61af02f4 ("ice: Initialize PF and setup miscellaneous interrupt") Signed-off-by: Anirudh Venkataramanan <[email protected]> Signed-off-by: Marcin Szycik <[email protected]> Tested-by: Jakub Andrysiak <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]>
2023-02-07nvidiafb: detect the hardware support before removing console.Dave Airlie1-39/+42
This driver removed the console, but hasn't yet decided if it could take over the console yet. Instead of doing that, probe the hw for support and then remove the console afterwards. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216859 Fixes: 145eed48de27 ("fbdev: Remove conflicting devices on PCI bus") Reported-by: Zeno Davatz <[email protected]> Tested-by: Zeno Davatz <[email protected]> Tested-by: Thomas Zimmermann <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-02-06btrfs: simplify update of last_dir_index_offset when logging a directoryFilipe Manana2-8/+17
When logging a directory, we always set the inode's last_dir_index_offset to the offset of the last dir index item we found. This is using an extra field in the log context structure, and it makes more sense to update it only after we insert dir index items, and we could directly update the inode's last_dir_index_offset field instead. So make this simpler by updating the inode's last_dir_index_offset only when we actually insert dir index keys in the log tree, and getting rid of the last_dir_item_offset field in the log context structure. Reported-by: David Arendt <[email protected]> Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Reported-by: Maxim Mikityanskiy <[email protected]> Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Reported-by: Hunter Wardlaw <[email protected]> Link: https://bugzilla.suse.com/show_bug.cgi?id=1207231 Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=216851 CC: [email protected] # 6.1+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2023-02-06Merge tag 'cgroup-for-6.2-rc7-fixes' of ↵Linus Torvalds1-9/+36
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "During the v6.2 cycle, there were a series of changes to task cpu affinity handling which fixed cpuset inadvertently clobbering user-configured affinity masks. Unfortunately, they broke the affinity handling on hybrid heterogeneous CPUs which have cores that can execute both 64 and 32bit along with cores that can only execute 32bit code. This contains two fix patches for the above issue. While reverting the changes that caused the regression is definitely an option, the origial patches do improve how cpuset behave signficantly in some cases and the fixes seem fairly safe, so I think it'd be better to try to fix them first" * tag 'cgroup-for-6.2-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: Call set_cpus_allowed_ptr() with appropriate mask for task cgroup/cpuset: Don't filter offline CPUs in cpuset_cpus_allowed() for top cpuset tasks
2023-02-06Merge tag 'for-6.2-rc7-tag' of ↵Linus Torvalds4-8/+20
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - explicitly initialize zlib work memory to fix a KCSAN warning - limit number of send clones by maximum memory allocated - limit device size extent in case it device shrink races with chunk allocation - raid56 fixes: - fix copy&paste error in RAID6 stripe recovery - make error bitmap update atomic * tag 'for-6.2-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: raid56: make error_bitmap update atomic btrfs: send: limit number of clones and allocated memory size btrfs: zlib: zero-initialize zlib workspace btrfs: limit device extents to the device size btrfs: raid56: fix stripes if vertical errors are found
2023-02-06Two bug fixes for tas5805m codec driverMark Brown1-41/+90
Merge series from Daniel Beer <[email protected]>: This pair of patches fixes two issues which crept in while revising the original submission, at a time when I no longer had access to test hardware. The fixes here have been tested and verified on hardware.
2023-02-06cpuset: Call set_cpus_allowed_ptr() with appropriate mask for taskWill Deacon1-7/+11
set_cpus_allowed_ptr() will fail with -EINVAL if the requested affinity mask is not a subset of the task_cpu_possible_mask() for the task being updated. Consequently, on a heterogeneous system with cpusets spanning the different CPU types, updates to the cgroup hierarchy can silently fail to update task affinities when the effective affinity mask for the cpuset is expanded. For example, consider an arm64 system with 4 CPUs, where CPUs 2-3 are the only cores capable of executing 32-bit tasks. Attaching a 32-bit task to a cpuset containing CPUs 0-2 will correctly affine the task to CPU 2. Extending the cpuset to CPUs 0-3, however, will fail to extend the affinity mask of the 32-bit task because update_tasks_cpumask() will pass the full 0-3 mask to set_cpus_allowed_ptr(). Extend update_tasks_cpumask() to take a temporary 'cpumask' paramater and use it to mask the 'effective_cpus' mask with the possible mask for each task being updated. Fixes: 431c69fac05b ("cpuset: Honour task_cpu_possible_mask() in guarantee_online_cpus()") Signed-off-by: Will Deacon <[email protected]> Acked-by: Waiman Long <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2023-02-06cgroup/cpuset: Don't filter offline CPUs in cpuset_cpus_allowed() for top ↵Waiman Long1-2/+25
cpuset tasks Since commit 8f9ea86fdf99 ("sched: Always preserve the user requested cpumask"), relax_compatible_cpus_allowed_ptr() is calling __sched_setaffinity() unconditionally. This helps to expose a bug in the current cpuset hotplug code where the cpumasks of the tasks in the top cpuset are not updated at all when some CPUs become online or offline. It is likely caused by the fact that some of the tasks in the top cpuset, like percpu kthreads, cannot have their cpu affinity changed. One way to reproduce this as suggested by Peter is: - boot machine - offline all CPUs except one - taskset -p ffffffff $$ - online all CPUs Fix this by allowing cpuset_cpus_allowed() to return a wider mask that includes offline CPUs for those tasks that are in the top cpuset. For tasks not in the top cpuset, the old rule applies and only online CPUs will be returned in the mask since hotplug events will update their cpumasks accordingly. Fixes: 8f9ea86fdf99 ("sched: Always preserve the user requested cpumask") Reported-by: Will Deacon <[email protected]> Originally-from: Peter Zijlstra (Intel) <[email protected]> Tested-by: Will Deacon <[email protected]> Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2023-02-06Merge tag 'sti-dt-for-6.3-round1' of ↵Arnd Bergmann1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti into arm/fixes Fix polarity of reset line of tsin0 port for stihxxx-b2120 * tag 'sti-dt-for-6.3-round1' of git://git.kernel.org/pub/scm/linux/kernel/git/pchotard/sti: ARM: dts: stihxxx-b2120: fix polarity of reset line of tsin0 port Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-02-06Merge tag 'cpufreq-arm-fixes-6.2' of ↵Rafael J. Wysocki1-11/+13
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm Pull an ARM cpufreq fix for 6.2-rc8 from Viresh Kumar: - Fix the incorrect value returned by cpufreq driver's ->get() callback for Qualcomm platforms (Douglas Anderson). * tag 'cpufreq-arm-fixes-6.2' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm: cpufreq: qcom-hw: Fix cpufreq_driver->get() for non-LMH systems
2023-02-06drm/virtio: exbuf->fence_fd unmodified on interrupted waitRyan Neph2-4/+2
An interrupted dma_fence_wait() becomes an -ERESTARTSYS returned to userspace ioctl(DRM_IOCTL_VIRTGPU_EXECBUFFER) calls, prompting to retry the ioctl(), but the passed exbuf->fence_fd has been reset to -1, making the retry attempt fail at sync_file_get_fence(). The uapi for DRM_IOCTL_VIRTGPU_EXECBUFFER is changed to retain the passed value for exbuf->fence_fd when returning anything besides a successful result from the ioctl. Fixes: 2cd7b6f08bc4 ("drm/virtio: add in/out fence support for explicit synchronization") Signed-off-by: Ryan Neph <[email protected]> Reviewed-by: Rob Clark <[email protected]> Reviewed-by: Dmitry Osipenko <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-02-06ALSA: hda/realtek: Add quirk for ASUS UM3402 using CS35L41Stefan Binding1-0/+1
This Asus Zenbook laptop use Realtek HDA codec combined with 2xCS35L41 Amplifiers using I2C with External Boost. Signed-off-by: Stefan Binding <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-02-06HID: Ignore battery for ELAN touchscreen 29DF on HPLuka Guzenko2-0/+3
The touchscreen reports a battery status of 0% and jumps to 1% when a stylus is used. The device ID was added and the battery ignore quirk was enabled for it. Signed-off-by: Luka Guzenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Benjamin Tissoires <[email protected]>
2023-02-06rtmutex: Ensure that the top waiter is always woken upWander Lairson Costa1-2/+3
Let L1 and L2 be two spinlocks. Let T1 be a task holding L1 and blocked on L2. T1, currently, is the top waiter of L2. Let T2 be the task holding L2. Let T3 be a task trying to acquire L1. The following events will lead to a state in which the wait queue of L2 isn't empty, but no task actually holds the lock. T1 T2 T3 == == == spin_lock(L1) | raw_spin_lock(L1->wait_lock) | rtlock_slowlock_locked(L1) | | task_blocks_on_rt_mutex(L1, T3) | | | orig_waiter->lock = L1 | | | orig_waiter->task = T3 | | | raw_spin_unlock(L1->wait_lock) | | | rt_mutex_adjust_prio_chain(T1, L1, L2, orig_waiter, T3) spin_unlock(L2) | | | | | rt_mutex_slowunlock(L2) | | | | | | raw_spin_lock(L2->wait_lock) | | | | | | wakeup(T1) | | | | | | raw_spin_unlock(L2->wait_lock) | | | | | | | | waiter = T1->pi_blocked_on | | | | waiter == rt_mutex_top_waiter(L2) | | | | waiter->task == T1 | | | | raw_spin_lock(L2->wait_lock) | | | | dequeue(L2, waiter) | | | | update_prio(waiter, T1) | | | | enqueue(L2, waiter) | | | | waiter != rt_mutex_top_waiter(L2) | | | | L2->owner == NULL | | | | wakeup(T1) | | | | raw_spin_unlock(L2->wait_lock) T1 wakes up T1 != top_waiter(L2) schedule_rtlock() If the deadline of T1 is updated before the call to update_prio(), and the new deadline is greater than the deadline of the second top waiter, then after the requeue, T1 is no longer the top waiter, and the wrong task is woken up which will then go back to sleep because it is not the top waiter. This can be reproduced in PREEMPT_RT with stress-ng: while true; do stress-ng --sched deadline --sched-period 1000000000 \ --sched-runtime 800000000 --sched-deadline \ 1000000000 --mmapfork 23 -t 20 done A similar issue was pointed out by Thomas versus the cases where the top waiter drops out early due to a signal or timeout, which is a general issue for all regular rtmutex use cases, e.g. futex. The problematic code is in rt_mutex_adjust_prio_chain(): // Save the top waiter before dequeue/enqueue prerequeue_top_waiter = rt_mutex_top_waiter(lock); rt_mutex_dequeue(lock, waiter); waiter_update_prio(waiter, task); rt_mutex_enqueue(lock, waiter); // Lock has no owner? if (!rt_mutex_owner(lock)) { // Top waiter changed ----> if (prerequeue_top_waiter != rt_mutex_top_waiter(lock)) ----> wake_up_state(waiter->task, waiter->wake_state); This only takes the case into account where @waiter is the new top waiter due to the requeue operation. But it fails to handle the case where @waiter is not longer the top waiter due to the requeue operation. Ensure that the new top waiter is woken up so in all cases so it can take over the ownerless lock. [ tglx: Amend changelog, add Fixes tag ] Fixes: c014ef69b3ac ("locking/rtmutex: Add wake_state to rt_mutex_waiter") Signed-off-by: Wander Lairson Costa <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.