aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-05-15ipack: tpci200: fix error return code in tpci200_register()Wei Yongjun1-0/+1
Fix to return negative error code -ENOMEM from the ioremap() error handling case instead of 0, as done elsewhere in this function. Fixes: 43986798fd50 ("ipack: add error handling for ioremap_nocache") Reported-by: Hulk Robot <[email protected]> Signed-off-by: Wei Yongjun <[email protected]> Cc: stable <[email protected]> Acked-by: Samuel Iglesias Gonsalvez <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-15coresight: cti: remove incorrect NULL return checkCalvin Johnson1-2/+2
fwnode_find_reference() doesn't return NULL and hence that check should be avoided. Signed-off-by: Calvin Johnson <[email protected]> Reviewed-by: Mathieu Poirier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-15mei: release me_cl object referenceAlexander Usyskin1-0/+2
Allow me_cl object to be freed by releasing the reference that was acquired by one of the search functions: __mei_me_cl_by_uuid_id() or __mei_me_cl_by_uuid() Cc: <[email protected]> Reported-by: 亿一 <[email protected]> Signed-off-by: Alexander Usyskin <[email protected]> Signed-off-by: Tomas Winkler <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-15Merge tag 'iio-fixes-for-5.7b' of ↵Greg Kroah-Hartman8-26/+52
https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: iio-fixes-for-5.7b Second set of fixes for IIO in the 5.7 cycle. Usual mixed bag of breakage in new code and ancient bugs. ad2s1210 - Fix missing CS change needed to actually read anything. atlas-sensor - Avoid clashing scan index with the timestamp channel. sca3000 - Fix a randomly placed get_device in an error message print. st_lsm6dsx - Fix missing unlock in error path. stm32-adc - Fix which device is used to request DMA to ensure it's one that has actually been registered at point of use. stm32-dfsdm - Fix which device is used to request DMA to ensure it's one that has actually been registered at poitn of use. ti-ads8344 - Fix channel selection. vf610 dac - Fix some missing error handling code. * tag 'iio-fixes-for-5.7b' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: iio: sca3000: Remove an erroneous 'get_device()' iio: adc: stm32-dfsdm: fix device used to request dma iio: adc: stm32-adc: fix device used to request dma iio: adc: ti-ads8344: Fix channel selection staging: iio: ad2s1210: Fix SPI reading iio: dac: vf610: Fix an error handling path in 'vf610_dac_probe()' iio: imu: st_lsm6dsx: unlock on error in st_lsm6dsx_shub_write_raw() iio: chemical: atlas-sensor: correct DO-SM channels
2020-05-15USB: gadget: fix illegal array access in binding with UDCKyungtae Kim1-0/+3
FuzzUSB (a variant of syzkaller) found an illegal array access using an incorrect index while binding a gadget with UDC. Reference: https://www.spinics.net/lists/linux-usb/msg194331.html This bug occurs when a size variable used for a buffer is misused to access its strcpy-ed buffer. Given a buffer along with its size variable (taken from user input), from which, a new buffer is created using kstrdup(). Due to the original buffer containing 0 value in the middle, the size of the kstrdup-ed buffer becomes smaller than that of the original. So accessing the kstrdup-ed buffer with the same size variable triggers memory access violation. The fix makes sure no zero value in the buffer, by comparing the strlen() of the orignal buffer with the size variable, so that the access to the kstrdup-ed buffer is safe. BUG: KASAN: slab-out-of-bounds in gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 Read of size 1 at addr ffff88806a55dd7e by task syz-executor.0/17208 CPU: 2 PID: 17208 Comm: syz-executor.0 Not tainted 5.6.8 #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xce/0x128 lib/dump_stack.c:118 print_address_description.constprop.4+0x21/0x3c0 mm/kasan/report.c:374 __kasan_report+0x131/0x1b0 mm/kasan/report.c:506 kasan_report+0x12/0x20 mm/kasan/common.c:641 __asan_report_load1_noabort+0x14/0x20 mm/kasan/generic_report.c:132 gadget_dev_desc_UDC_store+0x1ba/0x200 drivers/usb/gadget/configfs.c:266 flush_write_buffer fs/configfs/file.c:251 [inline] configfs_write_file+0x2f1/0x4c0 fs/configfs/file.c:283 __vfs_write+0x85/0x110 fs/read_write.c:494 vfs_write+0x1cd/0x510 fs/read_write.c:558 ksys_write+0x18a/0x220 fs/read_write.c:611 __do_sys_write fs/read_write.c:623 [inline] __se_sys_write fs/read_write.c:620 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:620 do_syscall_64+0x9e/0x510 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Signed-off-by: Kyungtae Kim <[email protected]> Reported-and-tested-by: Kyungtae Kim <[email protected]> Cc: Felipe Balbi <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/20200510054326.GA19198@pizza01 Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-15usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534BEugeniu Rosca1-1/+5
On Tue, May 12, 2020 at 09:36:07PM +0800, Kai-Heng Feng wrote [1]: > This patch prevents my Raven Ridge xHCI from getting runtime suspend. The problem described in v5.6 commit 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") applies solely to the USB5534B hub [2] present on the Kingfisher Infotainment Carrier Board, manufactured by Shimafuji Electric Inc [3]. Despite that, the aforementioned commit applied the quirk to _all_ hubs carrying vendor ID 0x424 (i.e. SMSC), of which there are more [4] than initially expected. Consequently, the quirk is now enabled on platforms carrying SMSC/Microchip hub models which potentially don't exhibit the original issue. To avoid reports like [1], further limit the quirk's scope to USB5534B [2], by employing both Vendor and Product ID checks. Tested on H3ULCB + Kingfisher rev. M05. [1] https://lore.kernel.org/linux-renesas-soc/[email protected]/ [2] https://www.microchip.com/wwwproducts/en/USB5534B [3] http://www.shimafuji.co.jp/wp/wp-content/uploads/2018/08/SBEV-RCAR-KF-M06Board_HWSpecificationEN_Rev130.pdf [4] https://devicehunt.com/search/type/usb/vendor/0424/device/any Fixes: 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub") Cc: [email protected] # v4.14+ Cc: Alan Stern <[email protected]> Cc: Hardik Gajjar <[email protected]> Cc: [email protected] Cc: [email protected] Reported-by: Kai-Heng Feng <[email protected]> Signed-off-by: Eugeniu Rosca <[email protected]> Tested-by: Kai-Heng Feng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-15Merge tag 'fixes-for-v5.7-rc6' of ↵Greg Kroah-Hartman6-95/+385
git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus Felipe writes: USB: fixes for v5.7-rc6 The main part here are the important fixes for the raw-gadget before it becomes an ABI. We're adding support for stall/halt/wedge which is actually pretty important in many situations. There's also a NULL pointer deref fix. Apart from raw-gadget, I've included some recent sparse fixes to a few drivers. Signed-off-by: Felipe Balbi <[email protected]> * tag 'fixes-for-v5.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb: usb: cdns3: gadget: make a bunch of functions static usb: mtu3: constify struct debugfs_reg32 usb: gadget: udc: atmel: Make some symbols static usb: raw-gadget: fix null-ptr-deref when reenabling endpoints usb: raw-gadget: documentation updates usb: raw-gadget: support stalling/halting/wedging endpoints usb: raw-gadget: fix gadget endpoint selection usb: raw-gadget: improve uapi headers comments
2020-05-15tty: serial: add missing spin_lock_init for SiFive serial consoleSagar Shrikant Kadam1-0/+1
An uninitialised spin lock for sifive serial console raises a bad magic spin_lock error as reported and discussed here [1]. Initialising the spin lock resolves the issue. The fix is tested on HiFive Unleashed A00 board with Linux 5.7-rc4 and OpenSBI v0.7 [1] https://lore.kernel.org/linux-riscv/[email protected] Fixes: 45c054d0815b ("tty: serial: add driver for the SiFive UART") Reported-by: Atish Patra <[email protected]> Signed-off-by: Sagar Shrikant Kadam <[email protected]> Reviewed-by: Palmer Dabbelt <[email protected]> Acked-by: Palmer Dabbelt <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-05-15x86: Fix early boot crash on gcc-10, third tryBorislav Petkov5-1/+23
... or the odyssey of trying to disable the stack protector for the function which generates the stack canary value. The whole story started with Sergei reporting a boot crash with a kernel built with gcc-10: Kernel panic — not syncing: stack-protector: Kernel stack is corrupted in: start_secondary CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.6.0-rc5—00235—gfffb08b37df9 #139 Hardware name: Gigabyte Technology Co., Ltd. To be filled by O.E.M./H77M—D3H, BIOS F12 11/14/2013 Call Trace: dump_stack panic ? start_secondary __stack_chk_fail start_secondary secondary_startup_64 -—-[ end Kernel panic — not syncing: stack—protector: Kernel stack is corrupted in: start_secondary This happens because gcc-10 tail-call optimizes the last function call in start_secondary() - cpu_startup_entry() - and thus emits a stack canary check which fails because the canary value changes after the boot_init_stack_canary() call. To fix that, the initial attempt was to mark the one function which generates the stack canary with: __attribute__((optimize("-fno-stack-protector"))) ... start_secondary(void *unused) however, using the optimize attribute doesn't work cumulatively as the attribute does not add to but rather replaces previously supplied optimization options - roughly all -fxxx options. The key one among them being -fno-omit-frame-pointer and thus leading to not present frame pointer - frame pointer which the kernel needs. The next attempt to prevent compilers from tail-call optimizing the last function call cpu_startup_entry(), shy of carving out start_secondary() into a separate compilation unit and building it with -fno-stack-protector, was to add an empty asm(""). This current solution was short and sweet, and reportedly, is supported by both compilers but we didn't get very far this time: future (LTO?) optimization passes could potentially eliminate this, which leads us to the third attempt: having an actual memory barrier there which the compiler cannot ignore or move around etc. That should hold for a long time, but hey we said that about the other two solutions too so... Reported-by: Sergei Trofimovich <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Tested-by: Kalle Valo <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-05-15MAINTAINERS: add maintainer for mediatek i2c controller driverQii Wang1-0/+7
Add Qii Wang as maintainer for mediatek i2c controller driver. Signed-off-by: Qii Wang <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-05-15i2c: mux: Replace zero-length array with flexible-arrayGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] sizeof(flexible-array-member) triggers a warning because flexible array members have incomplete type[1]. There are some instances of code in which the sizeof operator is being incorrectly/erroneously applied to zero-length arrays and the result is zero. Such instances may be hiding some bugs. So, this work (flexible-array member conversions) will also help to get completely rid of those sorts of issues. This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <[email protected]> Reviewed-by: Peter Rosin <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-05-15i2c: mux: demux-pinctrl: Fix an error handling path in ↵Christophe JAILLET1-0/+1
'i2c_demux_pinctrl_probe()' A call to 'i2c_demux_deactivate_master()' is missing in the error handling path, as already done in the remove function. Fixes: 50a5ba876908 ("i2c: mux: demux-pinctrl: add driver") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-05-15i2c: altera: Fix race between xfer_msg and isr threadAtsushi Nemoto1-1/+9
Use a mutex to protect access to idev->msg_len, idev->buf, etc. which are modified by both altr_i2c_xfer_msg() and altr_i2c_isr(). This is the minimal fix for easy backporting. A cleanup to remove the spinlock will be added later. Signed-off-by: Atsushi Nemoto <[email protected]> Acked-by: Thor Thayer <[email protected]> [wsa: updated commit message] Signed-off-by: Wolfram Sang <[email protected]>
2020-05-15i2c: algo-pca: update contact emailWolfram Sang1-1/+1
The 'pengutronix' address is defunct for years. Use the proper contact address. Signed-off-by: Wolfram Sang <[email protected]>
2020-05-15i2c: at91: Fix pinmux after devm_gpiod_get() for bus recoveryCodrin Ciubotariu1-3/+17
devm_gpiod_get() usually calls gpio_request_enable() for non-strict pinmux drivers. These puts the pins in GPIO mode, whithout notifying the pinctrl driver. At this point, the I2C bus no longer owns the pins. To mux the pins back to the I2C bus, we use the pinctrl driver to change the state of the pins to GPIO, before using devm_gpiod_get(). After the pins are received as GPIOs, we switch theer pinctrl state back to the default one, Fixes: d3d3fdcc4c90 ("i2c: at91: implement i2c bus recovery") Signed-off-by: Codrin Ciubotariu <[email protected]> Acked-by: Ludovic Desroches <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-05-15ARM: dts: iwg20d-q7-dbcm-ca: Remove unneeded properties in hdmi@39Ricardo Cañuelo1-2/+0
Remove the adi,input-style and adi,input-justification properties of hdmi@39 to make it compliant with the "adi,adv7511w" DT binding. Signed-off-by: Ricardo Cañuelo <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-05-15ARM: dts: renesas: Make hdmi encoder nodes compliant with DT bindingsRicardo Cañuelo9-24/+4
Small fixes to make these DTs compliant with the adi,adv7511w and adi,adv7513 bindings: r8a7745-iwg22d-sodimm-dbhd-ca.dts r8a7790-lager.dts r8a7790-stout.dts r8a7791-koelsch.dts r8a7791-porter.dts r8a7792-blanche.dts r8a7793-gose.dts r8a7794-silk.dts: Remove the adi,input-style and adi,input-justification properties. r8a7792-wheat.dts: Reorder the I2C slave addresses of hdmi@3d and hdmi@39 and remove the adi,input-style and adi,input-justification properties. Signed-off-by: Ricardo Cañuelo <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-05-15arm64: dts: renesas: Make hdmi encoder nodes compliant with DT bindingsRicardo Cañuelo6-14/+2
Small fixes to make these DTs compliant with the adi,adv7511w binding. r8a77970-eagle.dts, r8a77970-v3msk.dts, r8a77980-condor.dts, r8a77980-v3hsk.dts, r8a77990-ebisu.dts: Remove the adi,input-style and adi,input-justification properties. r8a77995-draak.dts: Reorder the I2C slave addresses of the hdmi-encoder@39 node and remove the adi,input-style and adi,input-justification properties. Signed-off-by: Ricardo Cañuelo <[email protected]> Reviewed-by: Laurent Pinchart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]>
2020-05-15x86/unwind/orc: Fix error handling in __unwind_start()Josh Poimboeuf1-7/+9
The unwind_state 'error' field is used to inform the reliable unwinding code that the stack trace can't be trusted. Set this field for all errors in __unwind_start(). Also, move the zeroing out of the unwind_state struct to before the ORC table initialization check, to prevent the caller from reading uninitialized data if the ORC table is corrupted. Fixes: af085d9084b4 ("stacktrace/x86: add function for detecting reliable stack traces") Fixes: d3a09104018c ("x86/unwinder/orc: Dont bail on stack overflow") Fixes: 98d0c8ebf77e ("x86/unwind/orc: Prevent unwinding before ORC initialization") Reported-by: Pavel Machek <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lkml.kernel.org/r/d6ac7215a84ca92b895fdd2e1aa546729417e6e6.1589487277.git.jpoimboe@redhat.com
2020-05-15Merge tag 'drm-misc-fixes-2020-05-14' of ↵Dave Airlie1-3/+1
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes Just one meson patch this time to propagate an error code Signed-off-by: Dave Airlie <[email protected]> From: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-05-15dmaengine: ti: k3-udma: Fix TR mode flags for slave_sg and memcpyPeter Ujfalusi1-2/+4
cppi5_tr_csf_set() clears previously set Configuration Specific Flags. Setting the EOP flag clears the SUPR_EVT flag for the last TR which is not desirable as we do not want to have events from the TR. Signed-off-by: Peter Ujfalusi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-05-15dmaengine: zynqmp_dma: Move list_del inside zynqmp_dma_free_descriptor.Rafał Hibner1-2/+1
List elements are not formally removed from list during zynqmp_dma_reset. Signed-off-by: Rafal Hibner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Vinod Koul <[email protected]>
2020-05-15Merge tag 'drm-intel-fixes-2020-05-13-1' of ↵Dave Airlie8-27/+79
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Handle idling during i915_gem_evict_something busy loops (Chris) - Mark current submissions with a weak-dependency (Chris) - Propagate errror from completed fences (Chris) - Fixes on execlist to avoid GPU hang situation (Chris) - Fixes couple deadlocks (Chris) - Timeslice preemption fixes (Chris) - Fix Display Port interrupt handling on Tiger Lake (Imre) - Reduce debug noise around Frame Buffer Compression +(Peter) - Fix logic around IPC W/a for Coffee Lake and Kaby Lake +(Sultan) - Avoid dereferencing a dead context (Chris) Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-05-14MAINTAINERS: Mark networking drivers as Maintained.David S. Miller1-1/+1
Suggested-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-14ipmr: Add lockdep expression to ipmr_for_each_table macroAmol Grover1-3/+4
During the initialization process, ipmr_new_table() is called to create new tables which in turn calls ipmr_get_table() which traverses net->ipv4.mr_tables without holding the writer lock. However, this is safe to do so as no tables exist at this time. Hence add a suitable lockdep expression to silence the following false-positive warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc3-next-20200428-syzkaller #0 Not tainted ----------------------------- net/ipv4/ipmr.c:136 RCU-list traversed in non-reader section!! ipmr_get_table+0x130/0x160 net/ipv4/ipmr.c:136 ipmr_new_table net/ipv4/ipmr.c:403 [inline] ipmr_rules_init net/ipv4/ipmr.c:248 [inline] ipmr_net_init+0x133/0x430 net/ipv4/ipmr.c:3089 Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Reported-by: [email protected] Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Amol Grover <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-14ipmr: Fix RCU list debugging warningAmol Grover1-1/+2
ipmr_for_each_table() macro uses list_for_each_entry_rcu() for traversing outside of an RCU read side critical section but under the protection of rtnl_mutex. Hence, add the corresponding lockdep expression to silence the following false-positive warning at boot: [ 4.319347] ============================= [ 4.319349] WARNING: suspicious RCU usage [ 4.319351] 5.5.4-stable #17 Tainted: G E [ 4.319352] ----------------------------- [ 4.319354] net/ipv4/ipmr.c:1757 RCU-list traversed in non-reader section!! Fixes: f0ad0860d01e ("ipv4: ipmr: support multiple tables") Signed-off-by: Amol Grover <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-14drivers: net: hamradio: Fix suspicious RCU usage warning in bpqether.cMadhuparna Bhowmik1-1/+2
This patch fixes the following warning: ============================= WARNING: suspicious RCU usage 5.7.0-rc5-next-20200514-syzkaller #0 Not tainted ----------------------------- drivers/net/hamradio/bpqether.c:149 RCU-list traversed in non-reader section!! Since rtnl lock is held, pass this cond in list_for_each_entry_rcu(). Reported-by: [email protected] Signed-off-by: Madhuparna Bhowmik <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-14net: phy: broadcom: fix BCM54XX_SHD_SCR3_TRDDAPD value for BCM54810Kevin Lo2-2/+7
Set the correct bit when checking for PHY_BRCM_DIS_TXCRXC_NOENRGY on the BCM54810 PHY. Fixes: 0ececcfc9267 ("net: phy: broadcom: Allow BCM54810 to use bcm54xx_adjust_rxrefclk()") Signed-off-by: Kevin Lo <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-14scsi: target: Put lun_ref at end of tmr processingBodo Stroesser1-0/+1
Testing with Loopback I found that, after a Loopback LUN has executed a TMR, I can no longer unlink the LUN. The rm command hangs in transport_clear_lun_ref() at wait_for_completion(&lun->lun_shutdown_comp) The reason is, that transport_lun_remove_cmd() is not called at the end of target_tmr_work(). It seems, that in other fabrics this call happens implicitly when the fabric drivers call transport_generic_free_cmd() during their ->queue_tm_rsp(). Unfortunately Loopback seems to not comply to the common way of calling transport_generic_free_cmd() from ->queue_*(). Instead it calls transport_generic_free_cmd() from its ->check_stop_free() only. But the ->check_stop_free() is called by transport_cmd_check_stop_to_fabric() after it has reset the se_cmd->se_lun pointer. Therefore the following transport_generic_free_cmd() skips the transport_lun_remove_cmd(). So this patch re-adds the transport_lun_remove_cmd() at the end of target_tmr_work(), which was removed during commit 2c9fa49e100f ("scsi: target/core: Make ABORT and LUN RESET handling synchronous"). For fabrics using transport_generic_free_cmd() in the usual way the double call to transport_lun_remove_cmd() doesn't harm, as transport_lun_remove_cmd() checks for this situation and does not release lun_ref twice. Link: https://lore.kernel.org/r/[email protected] Fixes: 2c9fa49e100f ("scsi: target/core: Make ABORT and LUN RESET handling synchronous") Cc: [email protected] Tested-by: Bryant G. Ly <[email protected]> Reviewed-by: Bart van Assche <[email protected]> Signed-off-by: Bodo Stroesser <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-05-14evm: Fix a small race in init_desc()Dan Carpenter1-22/+22
The IS_ERR_OR_NULL() function has two conditions and if we got really unlucky we could hit a race where "ptr" started as an error pointer and then was set to NULL. Both conditions would be false even though the pointer at the end was NULL. This patch fixes the problem by ensuring that "*tfm" can only be NULL or valid. I have introduced a "tmp_tfm" variable to make that work. I also reversed a condition and pulled the code in one tab. Reported-by: Roberto Sassu <[email protected]> Fixes: 53de3b080d5e ("evm: Check also if *tfm is an error pointer in init_desc()") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Roberto Sassu <[email protected]> Acked-by: Krzysztof Struczynski <[email protected]> Signed-off-by: Mimi Zohar <[email protected]>
2020-05-14cifs: fix leaked reference on requeued writeAdam McCoy1-1/+1
Failed async writes that are requeued may not clean up a refcount on the file, which can result in a leaked open. This scenario arises very reliably when using persistent handles and a reconnect occurs while writing. cifs_writev_requeue only releases the reference if the write fails (rc != 0). The server->ops->async_writev operation will take its own reference, so the initial reference can always be released. Signed-off-by: Adam McCoy <[email protected]> Signed-off-by: Steve French <[email protected]> CC: Stable <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]>
2020-05-14NFSv3: fix rpc receive buffer size for MOUNT callOlga Kornievskaia1-1/+2
Prior to commit e3d3ab64dd66 ("SUNRPC: Use au_rslack when computing reply buffer size"), there was enough slack in the reply buffer to commodate filehandles of size 60bytes. However, the real problem was that the reply buffer size for the MOUNT operation was not correctly calculated. Received buffer size used the filehandle size for NFSv2 (32bytes) which is much smaller than the allowed filehandle size for the v3 mounts. Fix the reply buffer size (decode arguments size) for the MNT command. Fixes: 2c94b8eca1a2 ("SUNRPC: Use au_rslack when computing reply buffer size") Signed-off-by: Olga Kornievskaia <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2020-05-14tcp: fix error recovery in tcp_zerocopy_receive()Eric Dumazet1-3/+4
If user provides wrong virtual address in TCP_ZEROCOPY_RECEIVE operation we want to return -EINVAL error. But depending on zc->recv_skip_hint content, we might return -EIO error if the socket has SOCK_DONE set. Make sure to return -EINVAL in this case. BUG: KMSAN: uninit-value in tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] BUG: KMSAN: uninit-value in do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 CPU: 1 PID: 625 Comm: syz-executor.0 Not tainted 5.7.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:121 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 tcp_zerocopy_receive net/ipv4/tcp.c:1833 [inline] do_tcp_getsockopt+0x4494/0x6320 net/ipv4/tcp.c:3685 tcp_getsockopt+0xf8/0x1f0 net/ipv4/tcp.c:3728 sock_common_getsockopt+0x13f/0x180 net/core/sock.c:3131 __sys_getsockopt+0x533/0x7b0 net/socket.c:2177 __do_sys_getsockopt net/socket.c:2192 [inline] __se_sys_getsockopt+0xe1/0x100 net/socket.c:2189 __x64_sys_getsockopt+0x62/0x80 net/socket.c:2189 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:297 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45c829 Code: 0d b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 db b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f1deeb72c78 EFLAGS: 00000246 ORIG_RAX: 0000000000000037 RAX: ffffffffffffffda RBX: 00000000004e01e0 RCX: 000000000045c829 RDX: 0000000000000023 RSI: 0000000000000006 RDI: 0000000000000009 RBP: 000000000078bf00 R08: 0000000020000200 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000001d8 R14: 00000000004d3038 R15: 00007f1deeb736d4 Local variable ----zc@do_tcp_getsockopt created at: do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 do_tcp_getsockopt+0x1a74/0x6320 net/ipv4/tcp.c:3670 Fixes: 05255b823a61 ("tcp: add TCP_ZEROCOPY_RECEIVE support for zerocopy receive") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-14ARC: show_regs: avoid extra line of outputVineet Gupta1-8/+6
Signed-off-by: Vineet Gupta <[email protected]>
2020-05-14s390/kexec_file: fix initrd location for kdump kernelPhilipp Rudo1-1/+1
initrd_start must not point at the location the initrd is loaded into the crashkernel memory but at the location it will be after the crashkernel memory is swapped with the memory at 0. Fixes: ee337f5469fd ("s390/kexec_file: Add crash support to image loader") Reported-by: Lianbo Jiang <[email protected]> Signed-off-by: Philipp Rudo <[email protected]> Tested-by: Lianbo Jiang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Borntraeger <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-05-14s390/pci: Fix s390_mmio_read/write with MIONiklas Schnelle2-4/+219
The s390_mmio_read/write syscalls are currently broken when running with MIO. The new pcistb_mio/pcstg_mio/pcilg_mio instructions are executed similiarly to normal load/store instructions and do address translation in the current address space. That means inside the kernel they are aware of mappings into kernel address space while outside the kernel they use user space mappings (usually created through mmap'ing a PCI device file). Now when existing user space applications use the s390_pci_mmio_write and s390_pci_mmio_read syscalls, they pass I/O addresses that are mapped into user space so as to be usable with the new instructions without needing a syscall. Accessing these addresses with the old instructions as done currently leads to a kernel panic. Also, for such a user space mapping there may not exist an equivalent kernel space mapping which means we can't just use the new instructions in kernel space. Instead of replicating user mappings in the kernel which then might collide with other mappings, we can conceptually execute the new instructions as if executed by the user space application using the secondary address space. This even allows us to directly store to the user pointer without the need for copy_to/from_user(). Cc: [email protected] Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Niklas Schnelle <[email protected]> Reviewed-by: Sven Schnelle <[email protected]> Signed-off-by: Vasily Gorbik <[email protected]>
2020-05-14char: ipmi: convert to use i2c_new_client_device()Wolfram Sang1-2/+2
Move away from the deprecated API. Signed-off-by: Wolfram Sang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Corey Minyard <[email protected]>
2020-05-14SUNRPC: 'Directory with parent 'rpc_clnt' already present!'J. Bruce Fields1-1/+1
Each rpc_client has a cl_clid which is allocated from a global ida, and a debugfs directory which is named after cl_clid. We're releasing the cl_clid before we free the debugfs directory named after it. As soon as the cl_clid is released, that value is available for another newly created client. That leaves a window where another client may attempt to create a new debugfs directory with the same name as the not-yet-deleted debugfs directory from the dying client. Symptoms are log messages like Directory 4 with parent 'rpc_clnt' already present! Fixes: 7c4310ff5642 "SUNRPC: defer slow parts of rpc_free_client() to a workqueue." Signed-off-by: J. Bruce Fields <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2020-05-14Merge tag 'mmc-v5.7-rc4' of ↵Linus Torvalds5-17/+41
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: "MMC core: - Fix a couple of quite severe issues for the CQE request path MMC host: - alcor: Fix a resource leak in the error path for ->probe() - sdhci-acpi: Fix the DMA support for the AMD eMMC v5.0 variant - sdhci-pci-gli: Fix system resume support for GL975x - sdhci-pci-gli: Fix reboot error for GL9750" * tag 'mmc-v5.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-acpi: Add SDHCI_QUIRK2_BROKEN_64_BIT_DMA for AMDI0040 mmc: block: Fix request completion in the CQE timeout path mmc: core: Fix recursive locking issue in CQE recovery path mmc: core: Check request type before completing the request mmc: sdhci-pci-gli: Fix can not access GL9750 after reboot from Windows 10 mmc: alcor: Fix a resource leak in the error path for ->probe() mmc: sdhci-pci-gli: Fix no irq handler from suspend
2020-05-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller6-9/+40
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix gcc-10 compilation warning in nf_conntrack, from Arnd Bergmann. 2) Add NF_FLOW_HW_PENDING to avoid races between stats and deletion commands, from Paul Blakey. 3) Remove WQ_MEM_RECLAIM from the offload workqueue, from Roi Dayan. 4) Infinite loop when removing nf_conntrack module, from Florian Westphal. 5) Set NF_FLOW_TEARDOWN bit on expiration to avoid races when refreshing the timeout from the software path. 6) Missing nft_set_elem_expired() check in the rbtree, from Phil Sutter. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-05-14MAINTAINERS: Add Jakub to networking drivers.David S. Miller1-0/+1
Signed-off-by: David S. Miller <[email protected]>
2020-05-14MAINTAINERS: another add of Karsten Graul for S390 networkingUrsula Braun1-0/+1
Complete adding of Karsten as maintainer for all S390 networking parts in the kernel. Cc: Julian Wiedmann <[email protected]> Acked-by: Julian Wiedmann <[email protected]> Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-14drivers: ipa: fix typos for ipa_smp2p structure docWang Wenhu1-1/+1
Remove the duplicate "mutex", and change "Motex" to "Mutex". Also I recommend it's easier for understanding to make the "ready-interrupt" a bundle for it is a parallel description as "shutdown" which is appended after the slash. Signed-off-by: Wang Wenhu <[email protected]> Cc: Alex Elder <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-14pppoe: only process PADT targeted at local interfacesGuillaume Nault1-0/+3
We don't want to disconnect a session because of a stray PADT arriving while the interface is in promiscuous mode. Furthermore, multicast and broadcast packets make no sense here, so only PACKET_HOST is accepted. Reported-by: David Balažic <[email protected]> Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-14selftests/bpf: Enforce returning 0 for fentry/fexit programsYonghong Song1-2/+2
There are a few fentry/fexit programs returning non-0. The tests with these programs will break with the previous patch which enfoced return-0 rules. Fix them properly. Fixes: ac065870d928 ("selftests/bpf: Add BPF_PROG, BPF_KPROBE, and BPF_KRETPROBE macros") Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-05-14bpf: Enforce returning 0 for fentry/fexit progsYonghong Song1-0/+17
Currently, tracing/fentry and tracing/fexit prog return values are not enforced. In trampoline codes, the fentry/fexit prog return values are ignored. Let us enforce it to be 0 to avoid confusion and allows potential future extension. This patch also explicitly added return value checking for tracing/raw_tp, tracing/fmod_ret, and freplace programs such that these program return values can be anything. The purpose are two folds: 1. to make it explicit about return value expectations for these programs in verifier. 2. for tracing prog_type, if a future attach type is added, the default is -ENOTSUPP which will enforce to specify return value ranges explicitly. Fixes: fec56f5890d9 ("bpf: Introduce BPF trampoline") Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-05-14net: stmmac: fix num_por initializationVinod Koul1-2/+15
Driver missed initializing num_por which is one of the por values that driver configures to hardware. In order to get these values, add a new structure ethqos_emac_driver_data which holds por and num_por values and populate that in driver probe. Fixes: a7c30e62d4b8 ("net: stmmac: Add driver for Qualcomm ethqos") Reported-by: Rahul Ankushrao Kawadgave <[email protected]> Signed-off-by: Vinod Koul <[email protected]> Reviewed-by: Amit Kucheria <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-05-14security: Fix the default value of secid_to_secctx hookAnders Roxell1-1/+1
security_secid_to_secctx is called by the bpf_lsm hook and a successful return value (i.e 0) implies that the parameter will be consumed by the LSM framework. The current behaviour return success when the pointer isn't initialized when CONFIG_BPF_LSM is enabled, with the default return from kernel/bpf/bpf_lsm.c. This is the internal error: [ 1229.341488][ T2659] usercopy: Kernel memory exposure attempt detected from null address (offset 0, size 280)! [ 1229.374977][ T2659] ------------[ cut here ]------------ [ 1229.376813][ T2659] kernel BUG at mm/usercopy.c:99! [ 1229.378398][ T2659] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP [ 1229.380348][ T2659] Modules linked in: [ 1229.381654][ T2659] CPU: 0 PID: 2659 Comm: systemd-journal Tainted: G B W 5.7.0-rc5-next-20200511-00019-g864e0c6319b8-dirty #13 [ 1229.385429][ T2659] Hardware name: linux,dummy-virt (DT) [ 1229.387143][ T2659] pstate: 80400005 (Nzcv daif +PAN -UAO BTYPE=--) [ 1229.389165][ T2659] pc : usercopy_abort+0xc8/0xcc [ 1229.390705][ T2659] lr : usercopy_abort+0xc8/0xcc [ 1229.392225][ T2659] sp : ffff000064247450 [ 1229.393533][ T2659] x29: ffff000064247460 x28: 0000000000000000 [ 1229.395449][ T2659] x27: 0000000000000118 x26: 0000000000000000 [ 1229.397384][ T2659] x25: ffffa000127049e0 x24: ffffa000127049e0 [ 1229.399306][ T2659] x23: ffffa000127048e0 x22: ffffa000127048a0 [ 1229.401241][ T2659] x21: ffffa00012704b80 x20: ffffa000127049e0 [ 1229.403163][ T2659] x19: ffffa00012704820 x18: 0000000000000000 [ 1229.405094][ T2659] x17: 0000000000000000 x16: 0000000000000000 [ 1229.407008][ T2659] x15: 0000000000000000 x14: 003d090000000000 [ 1229.408942][ T2659] x13: ffff80000d5b25b2 x12: 1fffe0000d5b25b1 [ 1229.410859][ T2659] x11: 1fffe0000d5b25b1 x10: ffff80000d5b25b1 [ 1229.412791][ T2659] x9 : ffffa0001034bee0 x8 : ffff00006ad92d8f [ 1229.414707][ T2659] x7 : 0000000000000000 x6 : ffffa00015eacb20 [ 1229.416642][ T2659] x5 : ffff0000693c8040 x4 : 0000000000000000 [ 1229.418558][ T2659] x3 : ffffa0001034befc x2 : d57a7483a01c6300 [ 1229.420610][ T2659] x1 : 0000000000000000 x0 : 0000000000000059 [ 1229.422526][ T2659] Call trace: [ 1229.423631][ T2659] usercopy_abort+0xc8/0xcc [ 1229.425091][ T2659] __check_object_size+0xdc/0x7d4 [ 1229.426729][ T2659] put_cmsg+0xa30/0xa90 [ 1229.428132][ T2659] unix_dgram_recvmsg+0x80c/0x930 [ 1229.429731][ T2659] sock_recvmsg+0x9c/0xc0 [ 1229.431123][ T2659] ____sys_recvmsg+0x1cc/0x5f8 [ 1229.432663][ T2659] ___sys_recvmsg+0x100/0x160 [ 1229.434151][ T2659] __sys_recvmsg+0x110/0x1a8 [ 1229.435623][ T2659] __arm64_sys_recvmsg+0x58/0x70 [ 1229.437218][ T2659] el0_svc_common.constprop.1+0x29c/0x340 [ 1229.438994][ T2659] do_el0_svc+0xe8/0x108 [ 1229.440587][ T2659] el0_svc+0x74/0x88 [ 1229.441917][ T2659] el0_sync_handler+0xe4/0x8b4 [ 1229.443464][ T2659] el0_sync+0x17c/0x180 [ 1229.444920][ T2659] Code: aa1703e2 aa1603e1 910a8260 97ecc860 (d4210000) [ 1229.447070][ T2659] ---[ end trace 400497d91baeaf51 ]--- [ 1229.448791][ T2659] Kernel panic - not syncing: Fatal exception [ 1229.450692][ T2659] Kernel Offset: disabled [ 1229.452061][ T2659] CPU features: 0x240002,20002004 [ 1229.453647][ T2659] Memory Limit: none [ 1229.455015][ T2659] ---[ end Kernel panic - not syncing: Fatal exception ]--- Rework the so the default return value is -EOPNOTSUPP. There are likely other callbacks such as security_inode_getsecctx() that may have the same problem, and that someone that understand the code better needs to audit them. Thank you Arnd for helping me figure out what went wrong. Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks") Signed-off-by: Anders Roxell <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: James Morris <[email protected]> Cc: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-05-14libbpf: Fix register naming in PT_REGS s390 macrosSumanth Korikkar1-2/+2
Fix register naming in PT_REGS s390 macros Fixes: b8ebce86ffe6 ("libbpf: Provide CO-RE variants of PT_REGS macros") Signed-off-by: Sumanth Korikkar <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Reviewed-by: Julian Wiedmann <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-05-14bpf: Fix bug in mmap() implementation for BPF array mapAndrii Nakryiko2-1/+14
mmap() subsystem allows user-space application to memory-map region with initial page offset. This wasn't taken into account in initial implementation of BPF array memory-mapping. This would result in wrong pages, not taking into account requested page shift, being memory-mmaped into user-space. This patch fixes this gap and adds a test for such scenario. Fixes: fc9702273e2e ("bpf: Add mmap() support for BPF_MAP_TYPE_ARRAY") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.