Age | Commit message (Collapse) | Author | Files | Lines |
|
Sending uevents requires the struct device to be alive. To
ensure that grab the device refcount instead of just an inode
reference.
Fixes: bc359d03c7ec ("block: add a disk_uevent helper")
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field array bounds checking for memcpy(), memmove(), and memset(),
avoid intentionally reading across neighboring array fields.
Add a wrapping structure to serve as the memcpy() source, so the compiler
can do appropriate bounds checking, avoiding this future warning:
In function '__fortify_memcpy',
inlined from 'create_uid' at drivers/s390/block/dasd_eckd.c:749:2:
./include/linux/fortify-string.h:246:4: error: call to '__read_overflow2_field' declared with attribute error: detected read beyond size of field (2nd parameter)
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: Stefan Haberland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
dasd_set_target_state is only used inside of dasd_mod.ko, so don't
export it.
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Stefan Haberland <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
If disk have been deleted, we should return fail for ioctl
BLKPG_DEL_PARTITION. Otherwise, the directory /sys/class/block
may remain invalid symlinks file. The race as following:
blkdev_open
del_gendisk
disk->flags &= ~GENHD_FL_UP;
blk_drop_partitions
blkpg_ioctl
bdev_add_partition
add_partition
device_add
device_add_class_symlinks
ioctl may add_partition after del_gendisk() have tried to delete
partitions. Then, symlinks file will be created.
Reviewed-by: Jan Kara <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Yufen Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Remove some leftovers of the fake major number parsing that cause
complains from some compilers.
Fixes: 2933a1b2c6f3 ("ubd: remove the code to register as the legacy IDE driver")
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
We don't have an nvme status to report if the driver's .queue_rq()
returns an error without dispatching the requested nvme command. Check
the return value from blk_execute_rq() for all passthrough commands so
the caller may know their command was not successful.
If the command is from the target passthrough interface and fails to
dispatch, synthesize the response back to the host as a internal target
error.
Signed-off-by: Keith Busch <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The synchronous blk_execute_rq() had not provided a way for its callers
to know if its request was successful or not. Return the blk_status_t
result of the request.
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The generic blk_execute_rq() knows how to handle polled completions. Use
that instead of implementing an nvme specific handler.
Signed-off-by: Keith Busch <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Poll for completions if the request's hctx is a polling type.
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
With the legacy IDE driver gone drivers now use either REQ_OP_DRV_*
or REQ_OP_SCSI_*, so unify the two concepts of passthrough requests
into a single one.
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
All driver uses are gone now.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Bart Van Assche <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Use idr_for_each_entry to simplify removing all devices.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
loop_lookup has two callers - one wants to do the a find by index and the
other wants any unbound loop device. Open code the respective
functionality in each caller.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Passing a negative index to loop_lookup while return any unbound device.
Doing that for a delete does not make much sense, so add check to
explicitly reject that case.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Move acquiring and releasing loop_ctl_mutex from the callers into
loop_add.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Split loop_control_ioctl into a helper for each command. This keeps the
code nicely separated for the upcoming locking changes.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
loop_add returns the right error if the slot wasn't available.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
None of the callers cares about the allocated struct loop_device.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
loop_ctl_mutex is only needed to iterate the IDR for removing the loop
devices, so reduce the coverage.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Unregister the misc and blockdevice first to prevent further access,
and only then iterate to remove the devices.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Fix a let hunk from the blk_mq_alloc_disk conversion.
Fixes: 281ea6a5bfdc ("mmc: switch to blk_mq_alloc_disk")
Reported-by: Marek Szyprowski <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Tested-by: Marek Szyprowski <[email protected]>
Acked-by: Ulf Hansson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Use the blk_mq_alloc_disk to allocate the request_queue and gendisk
together.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The gendisk already acquires a reference to the queue when add_disk
is called, which dropped on put_disk. So remove the superflous
extra refcounting.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Problem:
On reconfigure of device, there is no way to defend if the backend
storage is matching with the initial backend storage.
Say, if an initial connect request for backend "pool1/image1" got
mapped to /dev/nbd0 and the userspace process is terminated. A next
reconfigure request within NBD_ATTR_DEAD_CONN_TIMEOUT is allowed to
use /dev/nbd0 for a different backend "pool1/image2"
For example, an operation like below could be dangerous:
$ sudo rbd-nbd map --try-netlink rbd-pool/ext4-image
/dev/nbd0
$ sudo blkid /dev/nbd0
/dev/nbd0: UUID="bfc444b4-64b1-418f-8b36-6e0d170cfc04" TYPE="ext4"
$ sudo pkill -9 rbd-nbd
$ sudo rbd-nbd attach --try-netlink --device /dev/nbd0 rbd-pool/xfs-image
/dev/nbd0
$ sudo blkid /dev/nbd0
/dev/nbd0: UUID="d29bf343-6570-4069-a9ea-2fa156ced908" TYPE="xfs"
Solution:
Provide a way for userspace processes to keep some metadata to identify
between the device and the backend, so that when a reconfigure request is
made, we can compare and avoid such dangerous operations.
With this solution, as part of the initial connect request, backend
path can be stored in the sysfs per device config, so that on a reconfigure
request it's easy to check if the backend path matches with the initial
connect backend path.
Please note, ioctl interface to nbd will not have these changes, as there
won't be any reconfigure.
Signed-off-by: Prasanna Kumar Kalever <[email protected]>
Reviewed-by: Xiubo Li <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
With the legacy IDE driver long deprecated, and modern userspace being
much more flexible about dev_t assignments there is no reason to fake
a registration as the legacy IDE driver in ubd. This registeration
is a little problematic as it registers the same request_queue for
multiple gendisks, so just remove it.
Signed-off-by: Christoph Hellwig <[email protected]>
Acked-By: Anton Ivanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Fix up the recent blk_alloc_disk conversion.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Use blk_mq_alloc_disk and blk_cleanup_disk to simplify the gendisk and
request_queue allocation.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pass the driver specific attributes directly to device_add_disk instead
of manually creating them after the disk registration.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Pull block driver updates from Jens Axboe:
"Pretty calm round, mostly just NVMe and a bit of MD:
- NVMe updates (via Christoph)
- improve the APST configuration algorithm (Alexey Bogoslavsky)
- look for StorageD3Enable on companion ACPI device
(Mario Limonciello)
- allow selecting the network interface for TCP connections
(Martin Belanger)
- misc cleanups (Amit Engel, Chaitanya Kulkarni, Colin Ian King,
Christoph)
- move the ACPI StorageD3 code to drivers/acpi/ and add quirks
for certain AMD CPUs (Mario Limonciello)
- zoned device support for nvmet (Chaitanya Kulkarni)
- fix the rules for changing the serial number in nvmet
(Noam Gottlieb)
- various small fixes and cleanups (Dan Carpenter, JK Kim,
Chaitanya Kulkarni, Hannes Reinecke, Wesley Sheng, Geert
Uytterhoeven, Daniel Wagner)
- MD updates (Via Song)
- iostats rewrite (Guoqing Jiang)
- raid5 lock contention optimization (Gal Ofri)
- Fall through warning fix (Gustavo)
- Misc fixes (Gustavo, Jiapeng)"
* tag 'for-5.14/drivers-2021-06-29' of git://git.kernel.dk/linux-block: (78 commits)
nvmet: use NVMET_MAX_NAMESPACES to set nn value
loop: Fix missing discard support when using LOOP_CONFIGURE
nvme.h: add missing nvme_lba_range_type endianness annotations
nvme: remove zeroout memset call for struct
nvme-pci: remove zeroout memset call for struct
nvmet: remove zeroout memset call for struct
nvmet: add ZBD over ZNS backend support
nvmet: add Command Set Identifier support
nvmet: add nvmet_req_bio put helper for backends
nvmet: add req cns error complete helper
block: export blk_next_bio()
nvmet: remove local variable
nvmet: use nvme status value directly
nvmet: use u32 type for the local variable nsid
nvmet: use u32 for nvmet_subsys max_nsid
nvmet: use req->cmd directly in file-ns fast path
nvmet: use req->cmd directly in bdev-ns fast path
nvmet: make ver stable once connection established
nvmet: allow mn change if subsys not discovered
nvmet: make sn stable once connection was established
...
|
|
Pull core block updates from Jens Axboe:
- disk events cleanup (Christoph)
- gendisk and request queue allocation simplifications (Christoph)
- bdev_disk_changed cleanups (Christoph)
- IO priority improvements (Bart)
- Chained bio completion trace fix (Edward)
- blk-wbt fixes (Jan)
- blk-wbt enable/disable fix (Zhang)
- Scheduler dispatch improvements (Jan, Ming)
- Shared tagset scheduler improvements (John)
- BFQ updates (Paolo, Luca, Pietro)
- BFQ lock inversion fix (Jan)
- Documentation improvements (Kir)
- CLONE_IO block cgroup fix (Tejun)
- Remove of ancient and deprecated block dump feature (zhangyi)
- Discard merge fix (Ming)
- Misc fixes or followup fixes (Colin, Damien, Dan, Long, Max, Thomas,
Yang)
* tag 'for-5.14/block-2021-06-29' of git://git.kernel.dk/linux-block: (129 commits)
block: fix discard request merge
block/mq-deadline: Remove a WARN_ON_ONCE() call
blk-mq: update hctx->dispatch_busy in case of real scheduler
blk: Fix lock inversion between ioc lock and bfqd lock
bfq: Remove merged request already in bfq_requests_merged()
block: pass a gendisk to bdev_disk_changed
block: move bdev_disk_changed
block: add the events* attributes to disk_attrs
block: move the disk events code to a separate file
block: fix trace completion for chained bio
block/partitions/msdos: Fix typo inidicator -> indicator
block, bfq: reset waker pointer with shared queues
block, bfq: check waker only for queues with no in-flight I/O
block, bfq: avoid delayed merge of async queues
block, bfq: boost throughput by extending queue-merging times
block, bfq: consider also creation time in delayed stable merge
block, bfq: fix delayed stable merge check
block, bfq: let also stably merged queues enjoy weight raising
blk-wbt: make sure throttle is enabled properly
blk-wbt: introduce a new disable state to prevent false positive by rwb_enabled()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Jiri Kosina:
- patch series that ensures that hid-multitouch driver disables touch
and button-press reporting on hid-mt devices during suspend when the
device is not configured as a wakeup-source, from Hans de Goede
- support for ISH DMA on Intel EHL platform, from Even Xu
- support for Renoir and Cezanne SoCs, Ambient Light Sensor and Human
Presence Detection sensor for amd-sfh driver, from Basavaraj Natikar
- other assorted code cleanups and device-specific fixes/quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (45 commits)
HID: thrustmaster: Switch to kmemdup() when allocate change_request
HID: multitouch: Disable event reporting on suspend when the device is not a wakeup-source
HID: logitech-dj: Implement may_wakeup ll-driver callback
HID: usbhid: Implement may_wakeup ll-driver callback
HID: core: Add hid_hw_may_wakeup() function
HID: input: Add support for Programmable Buttons
HID: wacom: Correct base usage for capacitive ExpressKey status bits
HID: amd_sfh: Add initial support for HPD sensor
HID: amd_sfh: Extend ALS support for newer AMD platform
HID: amd_sfh: Extend driver capabilities for multi-generation support
HID: surface-hid: Fix get-report request
HID: sony: fix freeze when inserting ghlive ps3/wii dongles
HID: usbkbd: Avoid GFP_ATOMIC when GFP_KERNEL is possible
HID: amd_sfh: change in maintainer
HID: intel-ish-hid: ipc: Specify that EHL no cache snooping
HID: intel-ish-hid: ishtp: Add dma_no_cache_snooping() callback
HID: intel-ish-hid: Set ISH driver depends on x86
HID: hid-input: add Surface Go battery quirk
HID: intel-ish-hid: Fix minor typos in comments
HID: usbmouse: Avoid GFP_ATOMIC when GFP_KERNEL is possible
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras
Pull EDAC updates from Tony Luck:
"Various fixes and support for new CPUs:
- Clean up error messages from thunderx_edac
- Add MODULE_DEVICE_TABLE to ti_edac so it will autoload
- Use %pR to print resources in aspeed_edac
- Add Yazen Ghannam as MAINTAINER for AMD edac drivers
- Fix Ice Lake and Sapphire Rapids drivers to report correct "near"
or "far" device for errors in 2LM configurations
- Add support of on package high bandwidth memory in Sapphire Rapids
- New CPU support for three CPUs supporting in-band ECC (IOT SKUs for
ICL-NNPI, Tiger Lake and Alder Lake)
- Don't even try to load Intel EDAC drivers when running as a guest
- Fix Kconfig dependency on X86_MCE_INTEL for EDAC_IGEN6"
* tag 'edac_updates_for_v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
EDAC/igen6: fix core dependency
EDAC/Intel: Do not load EDAC driver when running as a guest
EDAC/igen6: Add Intel Alder Lake SoC support
EDAC/igen6: Add Intel Tiger Lake SoC support
EDAC/igen6: Add Intel ICL-NNPI SoC support
EDAC/i10nm: Add support for high bandwidth memory
EDAC/i10nm: Add detection of memory levels for ICX/SPR servers
EDAC/skx_common: Add new ADXL components for 2-level memory
MAINTAINERS: Make Yazen Ghannam maintainer for EDAC-AMD64
EDAC/aspeed: Use proper format string for printing resource
EDAC/ti: Add missing MODULE_DEVICE_TABLE
EDAC/thunderx: Remove irrelevant variable from error messages
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm driver updates from Jarkko Sakkinen:
"Bug fixes for TPM"
[ This isn't actually the whole contents of the tag and thus doesn't
contain Jarkko's signature - I dropped the two top commits that added
support for signing modules using elliptic curve keys because there's
a new series for that that fixes a few confising things - Linus ]
* tag 'tpmdd-next-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Replace WARN_ONCE() with dev_err_once() in tpm_tis_status()
tpm_tis: Use DEFINE_RES_MEM() to simplify code
tpm: fix some doc warnings in tpm1-cmd.c
tpm_tis_spi: add missing SPI device ID entries
tpm: add longer timeout for TPM2_CC_VERIFY_SIGNATURE
char: tpm: move to use request_irq by IRQF_NO_AUTOEN flag
tpm_tis_spi: set default probe function if device id not match
tpm_crb: Use IOMEM_ERR_PTR when function returns iomem
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Hans de Goede:
"Highlights:
- New think-lmi driver adding support for changing Lenovo Thinkpad
BIOS settings from within Linux using the standard firmware-
attributes class sysfs API
- MS Surface aggregator-cdev now also supports forwarding events to
user-space (for debugging / new driver development purposes only)
- New intel_skl_int3472 driver this provides the necessary glue to
translate ACPI table information to GPIOs, regulators, etc. for
camera sensors on Intel devices with IPU3 attached MIPI cameras
- A whole bunch of other fixes + device-specific quirk additions
- New devm_work_autocancel() devm-helpers.h function"
* tag 'platform-drivers-x86-v5.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (83 commits)
platform/x86: dell-wmi-sysman: Change user experience when Admin/System Password is modified
platform/x86: intel_skl_int3472: Uninitialized variable in skl_int3472_handle_gpio_resources()
platform/x86: think-lmi: Move kfree(setting->possible_values) to tlmi_attr_setting_release()
platform/x86: think-lmi: Split current_value to reflect only the value
platform/x86: think-lmi: Fix issues with duplicate attributes
platform/x86: think-lmi: Return EINVAL when kbdlang gets set to a 0 length string
platform/x86: intel_cht_int33fe: Move to its own subfolder
platform/x86: intel_skl_int3472: Move to intel/ subfolder
platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_clock()
platform/x86: intel_skl_int3472: Provide skl_int3472_unregister_regulator()
platform/x86: intel_skl_int3472: Use ACPI GPIO resource directly
platform/x86: intel_skl_int3472: Fix dependencies (drop CLKDEV_LOOKUP)
platform/x86: intel_skl_int3472: Free ACPI device resources after use
platform/x86: Remove "default n" entries
platform/x86: ISST: Use numa node id for cpu pci dev mapping
platform/x86: ISST: Optimize CPU to PCI device mapping
tools/power/x86/intel-speed-select: v1.10 release
tools/power/x86/intel-speed-select: Fix uncore memory frequency display
extcon: extcon-max8997: Simplify driver using devm
extcon: extcon-max8997: Fix IRQ freeing at error path
...
|
|
git://git.linaro.org/landing-teams/working/fujitsu/integration
Pull mailbox updates from Jassi Brar:
- imx: add support for i.MX8ULP
- mtk: code change around callback struct
- qcom: add sm6125, MSM8939 fix for channel exhaustion
- microchip: add support for polarfire controller
- misc: cosmetic changes to bcm-2835,flexrm,pdc, arm-mhu and hisilicon
* tag 'mailbox-v5.14' of git://git.linaro.org/landing-teams/working/fujitsu/integration: (26 commits)
MAINTAINERS: add entry for polarfire soc mailbox
dt-bindings: add bindings for polarfire soc system controller
mbox: add polarfire soc system controller mailbox
dt-bindings: add bindings for polarfire soc mailbox
mailbox: imx: Avoid using val uninitialized in imx_mu_isr()
mailbox: qcom: Add MSM8939 APCS support
mailbox: qcom: Use PLATFORM_DEVID_AUTO to register platform device
dt-bindings: mailbox: qcom: Add MSM8939 APCS compatible
mailbox: qcom-apcs: Add SM6125 compatible
dt-bindings: mailbox: Add binding for sm6125
mailbox: mtk-cmdq: Fix uninitialized variable in cmdq_mbox_flush()
mailbox: bcm-flexrm-mailbox: Remove redundant dev_err call in flexrm_mbox_probe()
mailbox: bcm2835: Remove redundant dev_err call in bcm2835_mbox_probe()
mailbox: qcom-ipcc: Fix IPCC mbox channel exhaustion
mailbox: mtk-cmdq: Add struct cmdq_pkt in struct cmdq_cb_data
mailbox: mtk-cmdq: Use mailbox rx_callback
mailbox: mtk-cmdq: Remove cmdq_cb_status
mailbox: imx-mailbox: support i.MX8ULP MU
mailbox: imx: add xSR/xCR register array
mailbox: imx: replace the xTR/xRR array with single register
...
|
|
Pull IPMI driver updates from Corey Minyard:
"Mostly a restructure of the kcs_bmc driver to make it easier to use
with different types of devices, and just to clean things up and
improve things.
Also some bug fixes for the kcs_bmc driver.
One fix to the IPMI watchdog to stop the timer when the action is
none. Not a big deal, but it's the right thing to do"
* tag 'for-linus-5.14-1' of git://github.com/cminyard/linux-ipmi:
ipmi: kcs_bmc_aspeed: Fix less than zero comparison of a unsigned int
ipmi: kcs_bmc_aspeed: Optionally apply status address
ipmi: kcs_bmc_aspeed: Fix IBFIE typo from datasheet
ipmi: kcs_bmc_aspeed: Implement KCS SerIRQ configuration
dt-bindings: ipmi: Add optional SerIRQ property to ASPEED KCS devices
dt-bindings: ipmi: Convert ASPEED KCS binding to schema
ipmi: kcs_bmc: Add serio adaptor
ipmi: kcs_bmc: Enable IBF on open
ipmi: kcs_bmc: Allow clients to control KCS IRQ state
ipmi: kcs_bmc: Decouple the IPMI chardev from the core
ipmi: kcs_bmc: Strip private client data from struct kcs_bmc
ipmi: kcs_bmc: Split headers into device and client
ipmi: kcs_bmc: Turn the driver data-structures inside-out
ipmi: kcs_bmc: Split out kcs_bmc_cdev_ipmi
ipmi: kcs_bmc: Rename {read,write}_{status,data}() functions
ipmi: kcs_bmc: Make status update atomic
ipmi: kcs_bmc_aspeed: Use of match data to extract KCS properties
ipmi/watchdog: Stop watchdog timer when the current action is 'none'
|
|
- patch series that ensures that hid-multitouch driver disables touch and
button-press reporting on hid-mt devices during suspend when the device is
not configured as a wakeup-source, from Hans de Goede
|
|
- support for LCD menu keys + LCD brightness control on the Logitech Z-10
speakers (with LCD) which use the same protocol as the G15 keyboards
from Hans de Goede
|
|
- support for ISH DMA on EHL platform from Even Xu
- various code style fixes and cleanups from Lee Jones and Uwe Kleine-König
|
|
- device tree match for Google Whiskers device from Ikjoon Jang
|
|
- device unbinding locking fix from Dmitry Torokhov
- support for programmable buttons (mapping to KEY_MACRO# event codes)
from Thomas Weißschuh
- various other small fixes and code style improvements
|
|
- support for Renoir and Cezanne SoCs
- support for Ambient Light Sensor
- support for Human Presence Detection sensor
all from Basavaraj Natikar
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm
Pull dlm updates from David Teigland:
"This is a major dlm networking enhancement that adds message
retransmission so that the dlm can reliably continue operating when
network connections fail and nodes reconnect.
Previously, this would result in lost messages which could only be
handled as a node failure"
* tag 'dlm-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/linux-dlm: (26 commits)
fs: dlm: invalid buffer access in lookup error
fs: dlm: fix race in mhandle deletion
fs: dlm: rename socket and app buffer defines
fs: dlm: introduce proto values
fs: dlm: move dlm allow conn
fs: dlm: use alloc_ordered_workqueue
fs: dlm: fix memory leak when fenced
fs: dlm: fix lowcomms_start error case
fs: dlm: Fix spelling mistake "stucked" -> "stuck"
fs: dlm: Fix memory leak of object mh
fs: dlm: don't allow half transmitted messages
fs: dlm: add midcomms debugfs functionality
fs: dlm: add reliable connection if reconnect
fs: dlm: add union in dlm header for lockspace id
fs: dlm: move out some hash functionality
fs: dlm: add functionality to re-transmit a message
fs: dlm: make buffer handling per msg
fs: dlm: add more midcomms hooks
fs: dlm: public header in out utility
fs: dlm: fix connection tcp EOF handling
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2
Pull gfs2 updates from Andreas Gruenbacher:
"Various minor gfs2 cleanups and fixes"
* tag 'gfs2-v5.13-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Clean up gfs2_unstuff_dinode
gfs2: Unstuff before locking page in gfs2_page_mkwrite
gfs2: Clean up the error handling in gfs2_page_mkwrite
gfs2: Fix error handling in init_statfs
gfs2: Fix underflow in gfs2_page_mkwrite
gfs2: Use list_move_tail instead of list_del/list_add_tail
gfs2: Fix do_gfs2_set_flags description
|
|
Pull cifs updates from Steve French:
- improve fallocate emulation
- DFS fixes
- minor multichannel fixes
- various cleanup patches, many to address Coverity warnings
* tag '5.14-rc-smb3-fixes-part1' of git://git.samba.org/sfrench/cifs-2.6: (38 commits)
smb3: prevent races updating CurrentMid
cifs: fix missing spinlock around update to ses->status
cifs: missing null pointer check in cifs_mount
smb3: fix possible access to uninitialized pointer to DACL
cifs: missing null check for newinode pointer
cifs: remove two cases where rc is set unnecessarily in sid_to_id
SMB3: Add new info level for query directory
cifs: fix NULL dereference in smb2_check_message()
smbdirect: missing rc checks while waiting for rdma events
cifs: Avoid field over-reading memcpy()
smb311: remove dead code for non compounded posix query info
cifs: fix SMB1 error path in cifs_get_file_info_unix
smb3: fix uninitialized value for port in witness protocol move
cifs: fix unneeded null check
cifs: use SPDX-Licence-Identifier
cifs: convert list_for_each to entry variant in cifs_debug.c
cifs: convert list_for_each to entry variant in smb2misc.c
cifs: avoid extra calls in posix_info_parse
cifs: retry lookup and readdir when EAGAIN is returned.
cifs: fix check of dfs interlinks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull openat2 fixes from Christian Brauner:
- Remove the unused VALID_UPGRADE_FLAGS define we carried from an
extension to openat2() that we haven't merged. Aleksa might be
getting back to it at some point but just not right now.
- openat2() used to accidently ignore unknown flag values in the upper
32 bits.
The new openat2() syscall verifies that no unknown O-flag values are
set and returns an error to userspace if they are while the older
open syscalls like open() and openat() simply ignore unknown flag
values:
#define O_FLAG_CURRENTLY_INVALID (1 << 31)
struct open_how how = {
.flags = O_RDONLY | O_FLAG_CURRENTLY_INVALID,
.resolve = 0,
};
/* fails */
fd = openat2(-EBADF, "/dev/null", &how, sizeof(how));
/* succeeds */
fd = openat(-EBADF, "/dev/null", O_RDONLY | O_FLAG_CURRENTLY_INVALID);
However, openat2() silently truncates the upper 32 bits meaning:
#define O_FLAG_CURRENTLY_INVALID_LOWER32 (1 << 31)
#define O_FLAG_CURRENTLY_INVALID_UPPER32 (1 << 40)
struct open_how how_lowe32 = {
.flags = O_RDONLY | O_FLAG_CURRENTLY_INVALID_LOWER32,
};
struct open_how how_upper32 = {
.flags = O_RDONLY | O_FLAG_CURRENTLY_INVALID_UPPER32,
};
/* fails */
fd = openat2(-EBADF, "/dev/null", &how_lower32, sizeof(how_lower32));
/* succeeds */
fd = openat2(-EBADF, "/dev/null", &how_upper32, sizeof(how_upper32));
Fix this by preventing the immediate truncation in build_open_flags()
and add a compile-time check to catch when we add flags in the upper
32 bit range.
* tag 'fs.openat2.unknown_flags.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
test: add openat2() test for invalid upper 32 bit flag value
open: don't silently ignore unknown O-flags in openat2()
fcntl: remove unused VALID_UPGRADE_FLAGS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr updates from Christian Brauner:
"A few releases ago the old mount API gained support for a mount
options which prevents following symlinks on a given mount. This adds
support for it in the new mount api through the MOUNT_ATTR_NOSYMFOLLOW
flag via mount_setattr() and fsmount(). With mount_setattr() that flag
can even be applied recursively.
There's an additional ack from Ross Zwisler who originally authored
the nosymfollow patch. As I've already had the patches in my for-next
I didn't add his ack explicitly"
* tag 'fs.mount_setattr.nosymfollow.v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
tests: test MOUNT_ATTR_NOSYMFOLLOW with mount_setattr()
mount: Support "nosymfollow" in new mount api
|
|
Merge misc updates from Andrew Morton:
"191 patches.
Subsystems affected by this patch series: kthread, ia64, scripts,
ntfs, squashfs, ocfs2, kernel/watchdog, and mm (gup, pagealloc, slab,
slub, kmemleak, dax, debug, pagecache, gup, swap, memcg, pagemap,
mprotect, bootmem, dma, tracing, vmalloc, kasan, initialization,
pagealloc, and memory-failure)"
* emailed patches from Andrew Morton <[email protected]>: (191 commits)
mm,hwpoison: make get_hwpoison_page() call get_any_page()
mm,hwpoison: send SIGBUS with error virutal address
mm/page_alloc: split pcp->high across all online CPUs for cpuless nodes
mm/page_alloc: allow high-order pages to be stored on the per-cpu lists
mm: replace CONFIG_FLAT_NODE_MEM_MAP with CONFIG_FLATMEM
mm: replace CONFIG_NEED_MULTIPLE_NODES with CONFIG_NUMA
docs: remove description of DISCONTIGMEM
arch, mm: remove stale mentions of DISCONIGMEM
mm: remove CONFIG_DISCONTIGMEM
m68k: remove support for DISCONTIGMEM
arc: remove support for DISCONTIGMEM
arc: update comment about HIGHMEM implementation
alpha: remove DISCONTIGMEM and NUMA
mm/page_alloc: move free_the_page
mm/page_alloc: fix counting of managed_pages
mm/page_alloc: improve memmap_pages dbg msg
mm: drop SECTION_SHIFT in code comments
mm/page_alloc: introduce vm.percpu_pagelist_high_fraction
mm/page_alloc: limit the number of pages on PCP lists when reclaim is active
mm/page_alloc: scale the number of pages that are batch freed
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull device properties framework updates from Rafael Wysocki:
"These unify device properties access in some pieces of code and make
related changes.
Specifics:
- Handle device properties with software node API in the ACPI IORT
table parsing code (Heikki Krogerus).
- Unify of_node access in the common device properties code, constify
the acpi_dma_supported() argument pointer and fix up CONFIG_ACPI=n
stubs of some functions related to device properties (Andy
Shevchenko)"
* tag 'devprop-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
device property: Unify access to of_node
ACPI: scan: Constify acpi_dma_supported() helper function
ACPI: property: Constify stubs for CONFIG_ACPI=n case
ACPI: IORT: Handle device properties with software node API
device property: Retrieve fwnode from of_node via accessor
|