aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-08-11drivers/net/wireless/libertas/cfg.c: needs sched.hAndrew Morton1-0/+2
i386 allmodconfig: drivers/net/wireless/libertas/cfg.c: In function 'lbs_scan_worker': drivers/net/wireless/libertas/cfg.c:722: error: 'TASK_NORMAL' undeclared (first use in this function) drivers/net/wireless/libertas/cfg.c:722: error: (Each undeclared identifier is reported only once drivers/net/wireless/libertas/cfg.c:722: error: for each function it appears in.) drivers/net/wireless/libertas/cfg.c: In function 'lbs_cfg_connect': drivers/net/wireless/libertas/cfg.c:1267: error: 'TASK_INTERRUPTIBLE' undeclared (first use in this function) drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function 'signal_pending' drivers/net/wireless/libertas/cfg.c:1267: error: implicit declaration of function 'schedule_timeout' So wait.h has a dependency on sched.h, but doesn't include sched.h. This patch doesn't fix that. Cc: Dan Williams <[email protected]> Cc: "John W. Linville" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Peter Zijlstra <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-11fix "scripts/mod/modpost.c: fix memory leak"Andrew Morton1-2/+3
Fix error introduced by 37ed19d5cce35a40d3913cf9aa208ce9f60db3d7 ("scripts/mod/modpost.c: fix memory leak"). - don't kfree("") - fix one missed conversion Reported-by: Stephen Rothwell <[email protected]> Tested-by: Stephen Rothwell <[email protected]> Cc: Alexey Fomenko <[email protected]> Cc: Trevor Keith <[email protected]> Cc: Rusty Russell <[email protected]> Cc: Michal Marek <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-11isofs: Fix lseek() to position beyond 4 GBJan Andres1-1/+6
isofs supports files larger than 4 GB by using multi-extent files. However an lseek() to a position beyond 4 GB in such a file will fail with EINVAL, because s_maxbytes in the isofs superblock is initialized to 2^32-1, and generic_file_llseek() checks against that value. I therefore suggest increasing the value of s_maxbytes to have full support for large files in isofs. With multi-extent files, file size is only limited by the maximum size of the file system (8 TB), so this seems a reasonable value for s_maxbytes. Signed-off-by: Jan Andres <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-08-11vfs: remove unused MNT_STRICTATIMEMiklos Szeredi2-2/+0
Commit d0adde574b8487ef30f69e2d08bba769e4be513f added MNT_STRICTATIME but it isn't actually used (MS_STRICTATIME clears MNT_RELATIME and MNT_NOATIME rather than setting any mount flag). Signed-off-by: Miklos Szeredi <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-08-11vfs: show unreachable paths in getcwd and procMiklos Szeredi4-5/+57
Prepend "(unreachable)" to path strings if the path is not reachable from the current root. Two places updated are - the return string from getcwd() - and symlinks under /proc/$PID. Other uses of d_path() are left unchanged (we know that some old software crashes if /proc/mounts is changed). Signed-off-by: Miklos Szeredi <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-08-11vfs: only add " (deleted)" where necessaryMiklos Szeredi1-10/+22
__d_path() has 4 callers: d_path() sys_getcwd() seq_path_root() tomoyo_realpath_from_path2() Of these the only one which needs the " (deleted)" ending is d_path(). sys_getcwd() checks for existence before calling __d_path(). seq_path_root() is used to show the mountpoint path in /proc/PID/mountinfo, which is always a positive. And tomoyo doesn't want the deleted ending. Create a helper "path_with_deleted()" as subsequent patches will need this in multiple places. Signed-off-by: Miklos Szeredi <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-08-11vfs: add prepend_path() helperMiklos Szeredi1-36/+58
Split off prepend_path() from __d_path(). This new helper takes an end-of-buffer pointer and buffer-length pointer just like the other prepend_* functions. Move the " (deleted)" postfix out to __d_path(). This patch doesn't change any functionality but paves the way for the following patches. Signed-off-by: Miklos Szeredi <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-08-11vfs: __d_path: dont prepend the name of the root dentryMiklos Szeredi1-3/+9
In the old times pseudo-filesystems set the name of theroot dentry to some prefix like "pipe:" and the name of the child dentry to "[123]" and relied on a hack in __d_path() to replace the preceding slash with the root's name to get "pipe:[123]". Then the d_dname() dentry operation was introduced which solved the same problem without having to pre-fill the name in each dentry. Currently the following pseudo filesystems exist in the kernel: perfmon mtd anon_inode bdev pipe socket Of these only perfmon, anon_inode, pipe and socket create sub-dentries, all of which have now been switched to using d_dname(). bdev and mtd only create inodes. This means that now the hack to overwrite the slash can be removed, so for unreachable paths (e.g. within a detached mount) the path string won't be polluted with garbage. For these cases a subsequent patch will add a prefix, indicating that the path is unreachable. Signed-off-by: Miklos Szeredi <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-08-11ia64: perfmon: add d_dname methodMiklos Szeredi1-7/+8
Switch ia64/perfmon to using the d_dname() instead of relying on __d_path() to prepend the name of the root dentry to the path. CC: Tony Luck <[email protected]> CC: Fenghua Yu <[email protected]> Signed-off-by: Miklos Szeredi <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-08-11vfs: add helpers to get root and pwdMiklos Szeredi8-62/+49
Add three helpers that retrieve a refcounted copy of the root and cwd from the supplied fs_struct. get_fs_root() get_fs_pwd() get_fs_root_and_pwd() Signed-off-by: Miklos Szeredi <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-08-11cachefiles: use path_get instead of lone dgetMiklos Szeredi1-12/+14
Dentry references should not be acquired without a corresponding vfsmount ref. Signed-off-by: Miklos Szeredi <[email protected]> Acked-by: David Howells <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-08-11fs/sysv/super.c: add support for non-PDP11 v7 filesystemsLubomir Rintel1-24/+50
This adds byte order autodetection (of PDP-11 and LE filesystems). No attempt is made to detect big-endian filesystems -- were there any? Tested with PDP-11 v7 filesystems and PC-IX maintenance floppy. [[email protected]: coding-style fixes] [AV: parser.h inclusion was a rudiment of discarded stuff] Signed-off-by: Lubomir Rintel <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Al Viro <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-08-11V7: Adjust sanity checks for some volumesLubomir Rintel2-2/+15
Newly mkfs-ed filesystems from Seventh Edition have last modification time set to zero, but are otherwise perfectly valid. Also, tighten up other sanity checks to filter out most filesystems with different bytesex than we're using. Cc: Christoph Hellwig <[email protected]> Signed-off-by: Lubomir Rintel <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-08-11Add v7 aliasLubomir Rintel1-0/+1
So that the module gets autoloaded when a v7 filesystem is mounted. Cc: Christoph Hellwig <[email protected]> Signed-off-by: Lubomir Rintel <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-08-11v9fs: fixup for inode_setattr being removedStephen Rothwell1-3/+12
Signed-off-by: Stephen Rothwell <[email protected]> Signed-off-by: Al Viro <[email protected]>
2010-08-10Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds25-501/+740
* 'for-linus' of git://neil.brown.name/md: (24 commits) md: clean up do_md_stop md: fix another deadlock with removing sysfs attributes. md: move revalidate_disk() back outside open_mutex md/raid10: fix deadlock with unaligned read during resync md/bitmap: separate out loading a bitmap from initialising the structures. md/bitmap: prepare for storing write-intent-bitmap via dm-dirty-log. md/bitmap: optimise scanning of empty bitmaps. md/bitmap: clean up plugging calls. md/bitmap: reduce dependence on sysfs. md/bitmap: white space clean up and similar. md/raid5: export raid5 unplugging interface. md/plug: optionally use plugger to unplug an array during resync/recovery. md/raid5: add simple plugging infrastructure. md/raid5: export is_congested test raid5: Don't set read-ahead when there is no queue md: add support for raising dm events. md: export various start/stop interfaces md: split out md_rdev_init md: be more careful setting MD_CHANGE_CLEAN md/raid5: ensure we create a unique name for kmem_cache when mddev has no gendisk ...
2010-08-10x86: fix up system call numbering nitLinus Torvalds2-2/+2
As pointed out by Jiri Slaby: when I resolved the the 32-bit x85 system call entry tables for prlimit (due to the conflict with fanotify), I forgot to add the numbering in comments that we do for every fifth entry. Reported-by: Jiri Slaby <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-10power: Remove owner field from attribute initialization code in OLPC driverGuenter Roeck1-1/+0
Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-10i2c.h: fix kernel-doc warningsRandy Dunlap1-0/+2
Fix kernel-doc warnings in linux/i2c.h: Warning(include/linux/i2c.h:176): No description found for parameter 'alert' Warning(include/linux/i2c.h:259): No description found for parameter 'of_node' Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-10kernel/timer.c: fix kernel-doc function parameter warningRandy Dunlap1-0/+1
Fix kernel-doc warning, add @timer description: Warning(kernel/timer.c:335): No description found for parameter 'timer' Signed-off-by: Randy Dunlap <[email protected]> Cc: Thomas Gleixner <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-10docbook: fixup media support files for htmldocs alsoRandy Dunlap1-1/+1
'make htmldocs' produces errors due to missing a supporting media file, so add 'xmldoclinks' to the htmldocs dependencies so that the needed supporting file will be present. Documentation/DocBook/media.xml:4: warning: failed to load external entity "Documentation/DocBook/media-entities.tmpl" Signed-off-by: Randy Dunlap <[email protected]> Acked-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-10docbook: fix fatal error from libataRandy Dunlap1-1/+1
'make htmldocs' has a fatal error when processing libata.xml, as seen below. The string "Example patterns:" (or any string with "example.*:" in it AFAIK) causes some part of the doc generation tool chain to try to produce an <informalexample> block without a beginning <para>, but there is an ending </para> generated, which throws things out of kilter. I don't even know where (what program) this is happening in. I searched in docproc and xmlto and in some XML stylesheets without finding anything. If anyone can give me pointers about this, please do. Until this is fixed, let's just spell "Example" as "Sample" and match up the double quotation marks while there. Documentation/DocBook/libata.xml:6575: parser error : Opening and ending tag mismatch: programlisting line 6573 and para </para><para> ^ Documentation/DocBook/libata.xml:6580: parser error : Opening and ending tag mismatch: para line 6575 and programlisting </programlisting></informalexample> ^ unable to parse Documentation/DocBook/libata.xml make[2]: *** [Documentation/DocBook/libata.html] Error 1 Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-10jfs: don't allow os2 xattr namespace overlap with othersDave Kleikamp1-49/+38
It's currently possible to bypass xattr namespace access rules by prefixing valid xattr names with "os2.", since the os2 namespace stores extended attributes in a legacy format with no prefix. This patch adds checking to deny access to any valid namespace prefix following "os2.". Signed-off-by: Dave Kleikamp <[email protected]> Reported-by: Sergey Vlasov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2010-08-10Merge branch 'for-2.6.36' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds154-3211/+4286
* 'for-2.6.36' of git://git.kernel.dk/linux-2.6-block: (149 commits) block: make sure that REQ_* types are seen even with CONFIG_BLOCK=n xen-blkfront: fix missing out label blkdev: fix blkdev_issue_zeroout return value block: update request stacking methods to support discards block: fix missing export of blk_types.h writeback: fix bad _bh spinlock nesting drbd: revert "delay probes", feature is being re-implemented differently drbd: Initialize all members of sync_conf to their defaults [Bugz 315] drbd: Disable delay probes for the upcomming release writeback: cleanup bdi_register writeback: add new tracepoints writeback: remove unnecessary init_timer call writeback: optimize periodic bdi thread wakeups writeback: prevent unnecessary bdi threads wakeups writeback: move bdi threads exiting logic to the forker thread writeback: restructure bdi forker loop a little writeback: move last_active to bdi writeback: do not remove bdi from bdi_list writeback: simplify bdi code a little writeback: do not lose wake-ups in bdi threads ... Fixed up pretty trivial conflicts in drivers/block/virtio_blk.c and drivers/scsi/scsi_error.c as per Jens.
2010-08-10Merge branches 'master' and 'devel' into for-linusRussell King293-4667/+16093
Conflicts: arch/arm/Kconfig arch/arm/mm/Kconfig
2010-08-10Merge branch 'v4l_for_linus' of ↵Linus Torvalds109-5048/+13451
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: (94 commits) V4L/DVB: tvp7002: fix write to H-PLL Feedback Divider LSB register V4L/DVB: dvb: siano: free spinlock before schedule() V4L/DVB: media: video: pvrusb2: remove custom hex_to_bin() V4L/DVB: drivers: usbvideo: remove custom implementation of hex_to_bin() V4L/DVB: Report supported QAM modes on bt8xx V4L/DVB: media: ir-keytable: null dereference in debug code V4L/DVB: ivtv: convert to the new control framework V4L/DVB: ivtv: convert gpio subdev to new control framework V4L/DVB: wm8739: convert to the new control framework V4L/DVB: cs53l32a: convert to new control framework V4L/DVB: wm8775: convert to the new control framework V4L/DVB: cx2341x: convert to the control framework V4L/DVB: cx25840: convert to the new control framework V4L/DVB: cx25840/ivtv: replace ugly priv control with s_config V4L/DVB: saa717x: convert to the new control framework V4L/DVB: msp3400: convert to the new control framework V4L/DVB: saa7115: convert to the new control framework V4L/DVB: v4l2: hook up the new control framework into the core framework V4L/DVB: Documentation: add v4l2-controls.txt documenting the new controls API V4L/DVB: v4l2-ctrls: Whitespace cleanups ...
2010-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds9-26/+1192
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: watchdog: hpwdt: formatting of pointers in printk() watchdog: Adding support for ARM Primecell SP805 Watchdog watchdog: f71808e_wdt: new watchdog driver for Fintek F71808E and F71882FG watchdog: sch311x_wdt.c: set parent before registeriing the misc device in probe() function watchdog: wdt_pci.c: move ids to pci_ids.h watchdog: s3c2410_wdt - Fix removing of platform device
2010-08-10Merge branch 'for-linus' of ↵Linus Torvalds3-7/+11
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cxgb4: Obtain RDMA QID ranges from LLD/FW
2010-08-10Merge branch 'for-linus' of ↵Linus Torvalds25-247/+336
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: xpad - add USB-ID for PL-3601 Xbox 360 pad Input: cy8ctmg100_ts - signedness bug Input: elantech - report position also with 3 fingers Input: elantech - discard the first 2 positions on some firmwares Input: adxl34x - do not mark device as disabled on startup Input: gpio_keys - add hooks to enable/disable device Input: evdev - rearrange ioctl handling Input: dynamically allocate ABS information Input: switch to input_abs_*() access functions Input: add static inline accessors for ABS properties
2010-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds140-2126/+5019
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (148 commits) USB: serial: fix stalled writes USB: remove fake "address-of" expressions USB: fix thread-unsafe anchor utiliy routines USB: usbtest: support test device with only one iso-in or iso-out endpoint USB: usbtest: avoid to free coherent buffer in atomic context USB: xhci: Set DMA mask for host. USB: xhci: Don't flush doorbell writes. USB: xhci: Reduce reads and writes of interrupter registers. USB: xhci: Make xhci_set_hc_event_deq() static. USB: xhci: Minimize HW event ring dequeue pointer writes. USB: xhci: Make xhci_handle_event() static. USB: xhci: Remove unnecessary reads of IRQ_PENDING register. USB: xhci: Performance - move xhci_work() into xhci_irq() USB: xhci: Performance - move interrupt handlers into xhci-ring.c USB: xhci: Performance - move functions that find ep ring. USB:: fix linux/usb.h kernel-doc warnings USB: add USB serial ssu100 driver USB: usb-storage: implement autosuspend USB: ehci: fix remove of ehci debugfs dir USB: Add USB 2.0 to ssb ohci driver ...
2010-08-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6Linus Torvalds112-647/+5498
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty-2.6: (68 commits) U6715 16550A serial driver support Char: nozomi, set tty->driver_data appropriately Char: nozomi, fix tty->count counting serial: max3107: Fix gpiolib support hsu: call PCI pm hooks in suspend/resume function hsu: some code cleanup hsu: add a periodic timer to check dma rx channel hsu: driver for Medfield High Speed UART device mxser: remove unnesesary NULL check serial: add support for OX16PCI958 card serial: 68328serial.c: remove dead (ALMA_ANS | DRAGONIXVZ | M68EZ328ADS) timbuart: use __devinit and __devexit macros for probe and remove serial: MMIO32 support for 8250_early.c serial: mcf: don't take spinlocks in already protected functions serial: general fixes in the serial_rs485 structure serial: fix missing bit coverage of ASYNC_FLAGS serial: "altera_uart: simplify altera_uart_console_putc()" checkpatch fixes serial: crisv10: formatting of pointers in printk() vt: Fix warning: statement with no effect due to vt_kern.h tty_io: remove casts from void* ...
2010-08-10ARM: 6323/1: cam60: don't use __init for ↵Uwe Kleine-König1-2/+2
cam60_spi_{flash_platform_data,partitions} From: Uwe Kleine-König <[email protected]> To: [email protected] Subject: [PATCH 12/19] ARM: cam60: don't use __init for cam60_spi_{flash_platform_data,partitions} Date: Thu, 5 Aug 2010 16:08:46 +0200 Message-Id: <[email protected]> These two structs are referenced by cam60_spi_devices. The latter is copied at init time to kmalloced memory and so the copy isn't freed after booting. So it must not contain references to .init memory. This isn't noticed by modpost as cam60_spi_devices is in .init.data, too. Noticed-and-Acked-by: Andrew Victor <[email protected]> Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-08-10ARM: 6324/1: cam60: move cam60_spi_devices to .init.dataUwe Kleine-König1-2/+2
cam60_spi_devices is passed to at91_add_device_spi which calls spi_register_board_info. The latter makes a copy of it, so living in .init.data is OK. This fixes the following warning in cam60_defconfig: WARNING: vmlinux.o(.data+0x2a00): Section mismatch in reference from the variable cam60_spi_devices to the (unknown reference) .init.data:(unknown) The variable cam60_spi_devices references the (unknown reference) __initdata (unknown) If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console, Acked-by: Andrew Victor <[email protected]> Signed-off-by: Uwe Kleine-König <[email protected]> Signed-off-by: Russell King <[email protected]>
2010-08-10ceph: generalize mon requests, add pool op supportYehuda Sadeh2-17/+158
Generalize the current statfs synchronous requests, and support pool_ops. Signed-off-by: Yehuda Sadeh <[email protected]> Signed-off-by: Sage Weil <[email protected]>
2010-08-10USB: serial: fix stalled writesJohan Hovold1-5/+10
As David VomLehn points out, it was possible to receive an interrupt before clearing the free-urb flag which could lead to the urb being incorrectly marked as busy. For the same reason, move tx_bytes accounting so that it will never be negative. Note that the free-flags set and clear operations do not need any additional locking as they are manipulated while USB_SERIAL_WRITE_BUSY is set. Reported-by: David VomLehn <[email protected]> Tested-by: David VomLehn <[email protected]> Signed-off-by: Johan Hovold <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: remove fake "address-of" expressionsAlan Stern4-23/+15
Fake "address-of" expressions that evaluate to NULL generally confuse readers and can provoke compiler warnings. This patch (as1412) removes three such fake expressions, using "#ifdef"s in their place. Signed-off-by: Alan Stern <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: fix thread-unsafe anchor utiliy routinesChristian Lamparter1-29/+21
This patch fixes a race condition in two utility routines related to the removal/unlinking of urbs from an anchor. If two threads are concurrently accessing the same anchor, both could end up with the same urb - thinking they are the exclusive owner. Alan Stern pointed out a related issue in usb_unlink_anchored_urbs: "The URB isn't removed from the anchor until it completes (as a by-product of completion, in fact), which might not be for quite some time after the unlink call returns. In the meantime, the subroutine will keep trying to unlink it, over and over again." Cc: stable <[email protected]> Cc: Oliver Neukum <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Acked-by: Alan Stern <[email protected]> Signed-off-by: Christian Lamparter <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: usbtest: support test device with only one iso-in or iso-out endpointMing Lei1-1/+4
It is very common that one altsetting may include only one iso-in or iso-out single endpoint, especially for high bandwidth endpoint, so support it. Signed-off-by: Ming Lei <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: usbtest: avoid to free coherent buffer in atomic contextMing Lei1-1/+5
This patch fixes the warning below: [30753.755998] ------------[ cut here ]------------ [30753.755998] WARNING: at /home/tom/git/linux-2.6/linux-2.6-next/arch/x86/include/asm/dma-mapping.h:155 hcd_buffer_free+0xb1/0xd4 [usbcore]() [30753.755998] Hardware name: 6475EK2 [30753.755998] Modules linked in: uvcvideo ehci_hcd usbtest cdc_ether usbnet vfat fat usb_storage nfsd lockd nfs_acl auth_rpcgss exportfs mii tun videodev v4l1_compat v4l2_compat_ioctl32 fuse bridge stp llc sunrpc ipv6 cpufreq_ondemand acpi_cpufreq freq_table mperf kvm_intel kvm arc4 ecb ath5k usbhid mac80211 snd_hda_codec_conexant ch341 usbserial ath cfg80211 thinkpad_acpi snd_hda_intel pcspkr wmi hwmon yenta_socket iTCO_wdt iTCO_vendor_support i2c_i801 e1000e snd_hda_codec snd_hwdep snd_pcm snd_timer snd soundcore snd_page_alloc pata_acpi uhci_hcd ohci_hcd usbcore i915 drm_kms_helper drm i2c_algo_bit i2c_core video output [last unloaded: uvcvideo] [30753.755998] Pid: 0, comm: swapper Tainted: G W 2.6.35-rc6-gkh-wl+ #49 [30753.755998] Call Trace: [30753.755998] <IRQ> [<ffffffff8104478a>] warn_slowpath_common+0x80/0x98 [30753.755998] [<ffffffff810447b7>] warn_slowpath_null+0x15/0x17 [30753.755998] [<ffffffffa00ce02d>] hcd_buffer_free+0xb1/0xd4 [usbcore] [30753.755998] [<ffffffffa00c1345>] usb_free_coherent+0x1c/0x1e [usbcore] [30753.755998] [<ffffffffa00b13e4>] simple_free_urb+0x23/0x2f [usbtest] [30753.755998] [<ffffffffa00b210b>] iso_callback+0xbb/0x10f [usbtest] [30753.755998] [<ffffffffa00c7390>] usb_hcd_giveback_urb+0x8c/0xc0 [usbcore] [30753.755998] [<ffffffffa0449b35>] ehci_urb_done+0x84/0x95 [ehci_hcd] [30753.755998] [<ffffffffa044b5a5>] ehci_work+0x41a/0x7dd [ehci_hcd] [30753.755998] [<ffffffffa044e298>] ehci_irq+0x33b/0x370 [ehci_hcd] [30753.755998] [<ffffffff8100fb05>] ? sched_clock+0x9/0xd [30753.755998] [<ffffffff8105e641>] ? sched_clock_local+0x1c/0x82 [30753.755998] [<ffffffff8105e76a>] ? sched_clock_cpu+0xc3/0xce [30753.755998] [<ffffffff81067c7e>] ? trace_hardirqs_off+0xd/0xf [30753.755998] [<ffffffff8105e7b8>] ? cpu_clock+0x43/0x5e [30753.755998] [<ffffffffa00c6999>] usb_hcd_irq+0x45/0xa1 [usbcore] [30753.755998] [<ffffffff81092e02>] handle_IRQ_event+0x20/0xa5 [30753.755998] [<ffffffff81094cea>] handle_fasteoi_irq+0x92/0xd2 [30753.755998] [<ffffffff8100c0ed>] handle_irq+0x1f/0x2a [30753.755998] [<ffffffff8100b75d>] do_IRQ+0x57/0xbe [30753.755998] [<ffffffff8136a693>] ret_from_intr+0x0/0x16 [30753.755998] <EOI> [<ffffffff81223baa>] ? acpi_idle_enter_bm+0x231/0x269 [30753.755998] [<ffffffff81223ba3>] ? acpi_idle_enter_bm+0x22a/0x269 [30753.755998] [<ffffffff812c4b6b>] cpuidle_idle_call+0x99/0xce [30753.755998] [<ffffffff81008dd5>] cpu_idle+0x61/0xaa [30753.755998] [<ffffffff8136374b>] start_secondary+0x1c2/0x1c6 [30753.755998] ---[ end trace 904cfaf7ab4cb1a2 ]--- Signed-off-by: Ming Lei <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: xhci: Set DMA mask for host.Sarah Sharp1-0/+9
Tell the USB core that we can do DMA directly (instead of needing it to memory-map the buffers for PIO). If the xHCI host supports 64-bit addresses, set the DMA mask accordingly. Otherwise indicate the host can handle 32-bit DMA addresses. This improves performance because the USB core doesn't have to spend time remapping buffers in high memory into the 32-bit address range. Signed-off-by: Sarah Sharp <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: xhci: Don't flush doorbell writes.Sarah Sharp1-5/+0
To tell the host controller that there are transfers on the endpoint rings, we need to ring the endpoint doorbell. This is a PCI MMIO write, which can be delayed until another register read is queued. The previous code would flush the doorbell write by reading the doorbell register after the write. This may take time, and it's not necessary to force the host controller to know about the transfers right away. Don't flush the doorbell register writes. Signed-off-by: Sarah Sharp <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: xhci: Reduce reads and writes of interrupter registers.Sarah Sharp1-8/+10
The interrupter register set includes a register that says whether interrupts are pending for each event ring (the IP bit). Each MSI-X vector will get its own interrupter set with separate IP bits. The status register includes an "Event Interrupt (EINT)" bit that is set when an IP bit is set in any of the interrupters. When PCI interrupts are used, the EINT bit exactly mirrors the IP bit in the single interrupter set, and it is a waste of time to check both registers when trying to figure out if the xHC interrupted or another device on the shared IRQ line interrupted. Only check the IP bit to reduce register reads. The IP bit is automatically cleared by the xHC when MSI or MSI-X is enabled. It doesn't make sense to read that register to check for shared interrupts (since MSI and MSI-X aren't shared). It also doesn't make sense to write to that register to clear the IP bit, since it is cleared by the hardware. We can tell whether MSI or MSI-X is enabled by looking at the irq number in hcd->irq. If it's -1, we know MSI or MSI-X is enabled. Signed-off-by: Sarah Sharp <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: xhci: Make xhci_set_hc_event_deq() static.Sarah Sharp3-23/+23
Now that the event handler functions no longer use xhci_set_hc_event_deq() to update the event ring dequeue pointer, that function is not used by anything in xhci-ring.c. Move that function into xhci-mem.c and make it static. Signed-off-by: Sarah Sharp <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: xhci: Minimize HW event ring dequeue pointer writes.Sarah Sharp1-13/+37
The xHCI specification suggests that writing the hardware event ring dequeue pointer register too often can be an expensive operation for the xHCI hardware to manage. It suggests minimizing the number of writes to that register. Originally, the driver wrote the event ring dequeue pointer after each event was processed. Depending on how the event ring moderation register is set up and how fast the transfers are completing, there may be several events processed for each interrupt. This patch makes the hardware event ring dequeue pointer be written only once per interrupt. Make the transfer event handler and port status event handler only write the software event ring dequeue pointer. Move the updating of the hardware event ring dequeue pointer into the interrupt function. Move the contents of xhci_set_hc_event_deq() into the interrupt handler. The interrupt handler must clear the event handler busy flag, so it might as well also write the dequeue pointer to the same register. This eliminates two 32-bit PCI reads and two 32-bit PCI writes. Reported-by: Andiry Xu <[email protected]> Signed-off-by: Sarah Sharp <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: xhci: Make xhci_handle_event() static.Sarah Sharp2-2/+1
xhci_handle_event() is now only called from within xhci-ring.c, so make it static. Signed-off-by: Sarah Sharp <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: xhci: Remove unnecessary reads of IRQ_PENDING register.Sarah Sharp1-15/+12
Remove a duplicate register read of the interrupt pending register from xhci_irq(). Also, remove waiting on the posted write of that register. The host will see it eventually. It will probably read the register itself before deciding whether to interrupt the system again, forcing the posted write to complete. Signed-off-by: Sarah Sharp <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: xhci: Performance - move xhci_work() into xhci_irq()Sarah Sharp1-43/+30
When we move xhci_work() into xhci_irq(), we don't need to read the operational register status field twice. Signed-off-by: Sarah Sharp <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: xhci: Performance - move interrupt handlers into xhci-ring.cSarah Sharp3-103/+104
Most of the work for interrupt handling is done in xhci-ring.c, so it makes sense to move the functions that are first called when an interrupt happens (xhci_irq() or xhci_msi_irq()) into xhci-ring.c, so that the compiler can better optimize them. Shorten some lines to make it pass checkpatch. Signed-off-by: Sarah Sharp <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB: xhci: Performance - move functions that find ep ring.Sarah Sharp4-48/+85
I've been using perf to measure the top symbols while transferring 1GB of data on a USB 3.0 drive with dd. This is using the raw disk with /dev/sdb, with a block size of 1K. During performance testing, the top symbol was xhci_triad_to_transfer_ring(), a function that should return immediately if streams are not enabled for an endpoint. It turned out that the functions to find the endpoint ring was defined in xhci-mem.c and used in xhci-ring.c and xhci-hcd.c. I moved a copy of xhci_triad_to_transfer_ring() and xhci_urb_to_transfer_ring() into xhci-ring.c and declared them static. I also made a static version of xhci_urb_to_transfer_ring() in xhci.c. This improved throughput on a 1GB read of the raw disk with dd from 186MB/s to 195MB/s, and perf reported sampling the xhci_triad_to_transfer_ring() 0.06% of the time, rather than 9.26% of the time. Signed-off-by: Sarah Sharp <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-08-10USB:: fix linux/usb.h kernel-doc warningsRandy Dunlap1-0/+3
Fix kernel-doc warnings in linux/usb.h: Warning(include/linux/usb.h:185): No description found for parameter 'resetting_device' Warning(include/linux/usb.h:1212): No description found for parameter 'stream_id' Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.