aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-10-08net: usb: qmi_wwan: add Cellient MPL200 cardWilken Gottwalt1-0/+1
Add usb ids of the Cellient MPL200 card. Signed-off-by: Wilken Gottwalt <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-08macsec: avoid use-after-free in macsec_handle_frame()Eric Dumazet1-1/+3
De-referencing skb after call to gro_cells_receive() is not allowed. We need to fetch skb->len earlier. Fixes: 5491e7c6b1a9 ("macsec: enable GRO and RPS on macsec devices") Signed-off-by: Eric Dumazet <[email protected]> Cc: Paolo Abeni <[email protected]> Acked-by: Paolo Abeni <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-08r8169: consider that PHY reset may still be in progress after applying firmwareHeiner Kallweit1-0/+7
Some firmware files trigger a PHY soft reset and don't wait for it to be finished. PHY register writes directly after applying the firmware may fail or provide unexpected results therefore. Fix this by waiting for bit BMCR_RESET to be cleared after applying firmware. There's nothing wrong with the referenced change, it's just that the fix will apply cleanly only after this change. Fixes: 89fbd26cca7e ("r8169: fix firmware not resetting tp->ocp_base") Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-08openvswitch: handle DNAT tuple collisionDumitru Ceara1-9/+13
With multiple DNAT rules it's possible that after destination translation the resulting tuples collide. For example, two openvswitch flows: nw_dst=10.0.0.10,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20)) nw_dst=10.0.0.20,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20)) Assuming two TCP clients initiating the following connections: 10.0.0.10:5000->10.0.0.10:10 10.0.0.10:5000->10.0.0.20:10 Both tuples would translate to 10.0.0.10:5000->20.0.0.1:20 causing nf_conntrack_confirm() to fail because of tuple collision. Netfilter handles this case by allocating a null binding for SNAT at egress by default. Perform the same operation in openvswitch for DNAT if no explicit SNAT is requested by the user and allocate a null binding for SNAT for packets in the "original" direction. Reported-at: https://bugzilla.redhat.com/1877128 Suggested-by: Florian Westphal <[email protected]> Fixes: 05752523e565 ("openvswitch: Interface with NAT.") Signed-off-by: Dumitru Ceara <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-08sctp: fix sctp_auth_init_hmacs() error pathEric Dumazet1-0/+1
After freeing ep->auth_hmacs we have to clear the pointer or risk use-after-free as reported by syzbot: BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] BUG: KASAN: use-after-free in sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 Read of size 8 at addr ffff8880a8ff52c0 by task syz-executor941/6874 CPU: 0 PID: 6874 Comm: syz-executor941 Not tainted 5.9.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 sctp_endpoint_destroy+0x95/0x240 net/sctp/endpointola.c:203 sctp_endpoint_put net/sctp/endpointola.c:236 [inline] sctp_endpoint_free+0xd6/0x110 net/sctp/endpointola.c:183 sctp_destroy_sock+0x9c/0x3c0 net/sctp/socket.c:4981 sctp_v6_destroy_sock+0x11/0x20 net/sctp/socket.c:9415 sk_common_release+0x64/0x390 net/core/sock.c:3254 sctp_close+0x4ce/0x8b0 net/sctp/socket.c:1533 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:475 __sock_release+0xcd/0x280 net/socket.c:596 sock_close+0x18/0x20 net/socket.c:1277 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0xb7d/0x29f0 kernel/exit.c:806 do_group_exit+0x125/0x310 kernel/exit.c:903 __do_sys_exit_group kernel/exit.c:914 [inline] __se_sys_exit_group kernel/exit.c:912 [inline] __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:912 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x43f278 Code: Bad RIP value. RSP: 002b:00007fffe0995c38 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043f278 RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 RBP: 00000000004bf068 R08: 00000000000000e7 R09: ffffffffffffffd0 R10: 0000000020000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 kmem_cache_alloc_trace+0x174/0x300 mm/slab.c:3554 kmalloc include/linux/slab.h:554 [inline] kmalloc_array include/linux/slab.h:593 [inline] kcalloc include/linux/slab.h:605 [inline] sctp_auth_init_hmacs+0xdb/0x3b0 net/sctp/auth.c:464 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3422 [inline] kfree+0x10e/0x2b0 mm/slab.c:3760 sctp_auth_destroy_hmacs net/sctp/auth.c:511 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_init_hmacs net/sctp/auth.c:496 [inline] sctp_auth_init_hmacs+0x2b7/0x3b0 net/sctp/auth.c:454 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1f485649f529 ("[SCTP]: Implement SCTP-AUTH internals") Signed-off-by: Eric Dumazet <[email protected]> Cc: Vlad Yasevich <[email protected]> Cc: Neil Horman <[email protected]> Cc: Marcelo Ricardo Leitner <[email protected]> Acked-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-08Merge tag 'mac80211-for-net-2020-10-08' of ↵Jakub Kicinski1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== pull-request: mac80211 2020-10-08 A single fix for missing input validation in nl80211. ==================== Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski2-4/+10
Daniel Borkmann says: ==================== pull-request: bpf 2020-10-08 The main changes are: 1) Fix "unresolved symbol" build error under CONFIG_NET w/o CONFIG_INET due to missing tcp_timewait_sock and inet_timewait_sock BTF, from Yonghong Song. 2) Fix 32 bit sub-register bounds tracking for OR case, from Daniel Borkmann. ==================== Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-08bridge: Netlink interface fix.Henrik Bjoernlund1-15/+11
This commit is correcting NETLINK br_fill_ifinfo() to be able to handle 'filter_mask' with multiple flags asserted. Fixes: 36a8e8e265420 ("bridge: Extend br_fill_ifinfo to return MPR status") Signed-off-by: Henrik Bjoernlund <[email protected]> Reviewed-by: Horatiu Vultur <[email protected]> Suggested-by: Nikolay Aleksandrov <[email protected]> Tested-by: Horatiu Vultur <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-08Merge tag 'drm-fixes-2020-10-08' of git://anongit.freedesktop.org/drm/drmLinus Torvalds2-0/+3
Pull drm nouveau fixes from Dave Airlie: "Karol found two last minute nouveau fixes, they both fix crashes, the TTM one follows what other drivers do already, and the other is for bailing on load on unrecognised chipsets. - fix crash in TTM alloc fail path - return error earlier for unknown chipsets" * tag 'drm-fixes-2020-10-08' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/mem: guard against NULL pointer access in mem_del drm/nouveau/device: return error for unknown chipsets
2020-10-08Merge tag 'exfat-for-5.9-rc9' of ↵Linus Torvalds5-22/+12
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat Pull exfat fixes from Namjae Jeon: - Fix use of uninitialized spinlock on error path - Fix missing err assignment in exfat_build_inode() * tag 'exfat-for-5.9-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: fix use of uninitialized spinlock on error path exfat: fix pointer error checking
2020-10-08Merge tag 'for-linus-5.9b-rc9-tag' of ↵Linus Torvalds2-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fix from Juergen Gross: "One fix for a regression when booting as a Xen guest on ARM64 introduced probably during the 5.9 cycle. It is very low risk as it is modifying Xen specific code only. The exact commit introducing the bug hasn't been identified yet, but everything was fine in 5.8 and only in 5.9 some configurations started to fail" * tag 'for-linus-5.9b-rc9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/arm64: xen: Fix to convert percpu address to gfn correctly
2020-10-08afs: Fix deadlock between writeback and truncateDavid Howells3-9/+50
The afs filesystem has a lock[*] that it uses to serialise I/O operations going to the server (vnode->io_lock), as the server will only perform one modification operation at a time on any given file or directory. This prevents the the filesystem from filling up all the call slots to a server with calls that aren't going to be executed in parallel anyway, thereby allowing operations on other files to obtain slots. [*] Note that is probably redundant for directories at least since i_rwsem is used to serialise directory modifications and lookup/reading vs modification. The server does allow parallel non-modification ops, however. When a file truncation op completes, we truncate the in-memory copy of the file to match - but we do it whilst still holding the io_lock, the idea being to prevent races with other operations. However, if writeback starts in a worker thread simultaneously with truncation (whilst notify_change() is called with i_rwsem locked, writeback pays it no heed), it may manage to set PG_writeback bits on the pages that will get truncated before afs_setattr_success() manages to call truncate_pagecache(). Truncate will then wait for those pages - whilst still inside io_lock: # cat /proc/8837/stack [<0>] wait_on_page_bit_common+0x184/0x1e7 [<0>] truncate_inode_pages_range+0x37f/0x3eb [<0>] truncate_pagecache+0x3c/0x53 [<0>] afs_setattr_success+0x4d/0x6e [<0>] afs_wait_for_operation+0xd8/0x169 [<0>] afs_do_sync_operation+0x16/0x1f [<0>] afs_setattr+0x1fb/0x25d [<0>] notify_change+0x2cf/0x3c4 [<0>] do_truncate+0x7f/0xb2 [<0>] do_sys_ftruncate+0xd1/0x104 [<0>] do_syscall_64+0x2d/0x3a [<0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The writeback operation, however, stalls indefinitely because it needs to get the io_lock to proceed: # cat /proc/5940/stack [<0>] afs_get_io_locks+0x58/0x1ae [<0>] afs_begin_vnode_operation+0xc7/0xd1 [<0>] afs_store_data+0x1b2/0x2a3 [<0>] afs_write_back_from_locked_page+0x418/0x57c [<0>] afs_writepages_region+0x196/0x224 [<0>] afs_writepages+0x74/0x156 [<0>] do_writepages+0x2d/0x56 [<0>] __writeback_single_inode+0x84/0x207 [<0>] writeback_sb_inodes+0x238/0x3cf [<0>] __writeback_inodes_wb+0x68/0x9f [<0>] wb_writeback+0x145/0x26c [<0>] wb_do_writeback+0x16a/0x194 [<0>] wb_workfn+0x74/0x177 [<0>] process_one_work+0x174/0x264 [<0>] worker_thread+0x117/0x1b9 [<0>] kthread+0xec/0xf1 [<0>] ret_from_fork+0x1f/0x30 and thus deadlock has occurred. Note that whilst afs_setattr() calls filemap_write_and_wait(), the fact that the caller is holding i_rwsem doesn't preclude more pages being dirtied through an mmap'd region. Fix this by: (1) Use the vnode validate_lock to mediate access between afs_setattr() and afs_writepages(): (a) Exclusively lock validate_lock in afs_setattr() around the whole RPC operation. (b) If WB_SYNC_ALL isn't set on entry to afs_writepages(), trying to shared-lock validate_lock and returning immediately if we couldn't get it. (c) If WB_SYNC_ALL is set, wait for the lock. The validate_lock is also used to validate a file and to zap its cache if the file was altered by a third party, so it's probably a good fit for this. (2) Move the truncation outside of the io_lock in setattr, using the same hook as is used for local directory editing. This requires the old i_size to be retained in the operation record as we commit the revised status to the inode members inside the io_lock still, but we still need to know if we reduced the file size. Fixes: d2ddc776a458 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-10-08mm: avoid early COW write protect games during fork()Linus Torvalds1-37/+4
In commit 70e806e4e645 ("mm: Do early cow for pinned pages during fork() for ptes") we write-protected the PTE before doing the page pinning check, in order to avoid a race with concurrent fast-GUP pinning (which doesn't take the mm semaphore or the page table lock). That trick doesn't actually work - it doesn't handle memory ordering properly, and doing so would be prohibitively expensive. It also isn't really needed. While we're moving in the direction of allowing and supporting page pinning without marking the pinned area with MADV_DONTFORK, the fact is that we've never really supported this kind of odd "concurrent fork() and page pinning", and doing the serialization on a pte level is just wrong. We can add serialization with a per-mm sequence counter, so we know how to solve that race properly, but we'll do that at a more appropriate time. Right now this just removes the write protect games. It also turns out that the write protect games actually break on Power, as reported by Aneesh Kumar: "Architecture like ppc64 expects set_pte_at to be not used for updating a valid pte. This is further explained in commit 56eecdb912b5 ("mm: Use ptep/pmdp_set_numa() for updating _PAGE_NUMA bit")" and the code triggered a warning there: WARNING: CPU: 0 PID: 30613 at arch/powerpc/mm/pgtable.c:185 set_pte_at+0x2a8/0x3a0 arch/powerpc/mm/pgtable.c:185 Call Trace: copy_present_page mm/memory.c:857 [inline] copy_present_pte mm/memory.c:899 [inline] copy_pte_range mm/memory.c:1014 [inline] copy_pmd_range mm/memory.c:1092 [inline] copy_pud_range mm/memory.c:1127 [inline] copy_p4d_range mm/memory.c:1150 [inline] copy_page_range+0x1f6c/0x2cc0 mm/memory.c:1212 dup_mmap kernel/fork.c:592 [inline] dup_mm+0x77c/0xab0 kernel/fork.c:1355 copy_mm kernel/fork.c:1411 [inline] copy_process+0x1f00/0x2740 kernel/fork.c:2070 _do_fork+0xc4/0x10b0 kernel/fork.c:2429 Link: https://lore.kernel.org/lkml/CAHk-=wiWr+gO0Ro4LvnJBMs90OiePNyrE3E+pJvc9PzdBShdmw@mail.gmail.com/ Link: https://lore.kernel.org/linuxppc-dev/[email protected]/ Reported-by: Aneesh Kumar K.V <[email protected]> Tested-by: Leon Romanovsky <[email protected]> Cc: Peter Xu <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: John Hubbard <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Jan Kara <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Kirill Shutemov <[email protected]> Cc: Hugh Dickins <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-10-08block: ratelimit handle_bad_sector() messageTetsuo Handa1-5/+4
syzbot is reporting unkillable task [1], for the caller is failing to handle a corrupted filesystem image which attempts to access beyond the end of the device. While we need to fix the caller, flooding the console with handle_bad_sector() message is unlikely useful. [1] https://syzkaller.appspot.com/bug?id=f1f49fb971d7a3e01bd8ab8cff2ff4572ccf3092 Signed-off-by: Tetsuo Handa <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-10-08Merge tag 'nvme-5.10-2020-10-08' of git://git.infradead.org/nvme into ↵Jens Axboe5-268/+220
for-5.10/drivers Pull NVMe updates from Christoph: "nvme update for 5.10: - fix a controller refcount leak on init failure (Chaitanya Kulkarni) - misc cleanups (Chaitanya Kulkarni) - major refactoring of the scanning code (me)" * tag 'nvme-5.10-2020-10-08' of git://git.infradead.org/nvme: (23 commits) nvme-core: remove extra condition for vwc nvme-core: remove extra variable nvme: remove nvme_identify_ns_list nvme: refactor nvme_validate_ns nvme: move nvme_validate_ns nvme: query namespace identifiers before adding the namespace nvme: revalidate zone bitmaps in nvme_update_ns_info nvme: remove nvme_update_formats nvme: update the known admin effects nvme: set the queue limits in nvme_update_ns_info nvme: remove the 0 lba_shift check in nvme_update_ns_info nvme: clean up the check for too large logic block sizes nvme: freeze the queue over ->lba_shift updates nvme: factor out a nvme_configure_metadata helper nvme: call nvme_identify_ns as the first thing in nvme_alloc_ns_block nvme: lift the check for an unallocated namespace into nvme_identify_ns nvme: rename __nvme_revalidate_disk nvme: rename _nvme_revalidate_disk nvme: rename nvme_validate_ns to nvme_validate_or_alloc_ns nvme: remove the disk argument to nvme_update_zone_info ...
2020-10-08blk-throttle: Re-use the throtl_set_slice_end()Baolin Wang1-1/+1
Re-use throtl_set_slice_end() to remove duplicate code. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-10-08blk-throttle: Open code __throtl_de/enqueue_tg()Baolin Wang1-17/+9
The __throtl_de/enqueue_tg() functions are only be called by throtl_de/enqueue_tg(), thus we can just open code them to make code more readable. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-10-08blk-throttle: Move service tree validation out of the throtl_rb_first()Baolin Wang1-4/+5
The throtl_schedule_next_dispatch() will validate if the service queue is empty before calling update_min_dispatch_time(), and the update_min_dispatch_time() will call throtl_rb_first(), which will validate service queue again. Thus we can move the service queue validation out of the throtl_rb_first() to remove the redundant validation in the fast path. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-10-08blk-throttle: Move the list operation after list validationBaolin Wang1-2/+4
We should move the list operation after validation. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-10-08blk-throttle: Fix IO hang for a corner caseBaolin Wang1-4/+4
It can not scale up in throtl_adjusted_limit() if we set bps or iops is 1, which will cause IO hang when enable low limit. Thus we should treat 1 as a illegal value to avoid this issue. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-10-08blk-throttle: Avoid tracking latency if low limit is invalidBaolin Wang1-1/+3
The IO latency tracking is only for LOW limit, so we should add a validation to avoid redundant latency tracking if the LOW limit is not valid. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-10-08blk-throttle: Avoid getting the current time if tg->last_finish_time is 0Baolin Wang1-2/+6
We only update the tg->last_finish_time when the low limitaion is enabled, so we can move the tg->last_finish_time validation a little forward to avoid getting the unnecessary current time stamp if the the low limitation is not enabled. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-10-08blk-throttle: Remove a meaningless parameter for throtl_downgrade_state()Baolin Wang1-3/+3
The throtl_downgrade_state() is always used to change to LIMIT_LOW limitation, thus remove the latter meaningless parameter which indicates the limitation index. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-10-08block: Remove redundant 'return' statementBaolin Wang2-2/+2
Remove redundant 'return' statement for 'void' functions. Signed-off-by: Baolin Wang <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-10-08io_uring: no need to call xa_destroy() on empty xarrayJens Axboe1-1/+0
The kernel test robot reports this lockdep issue: [child1:659] mbind (274) returned ENOSYS, marking as inactive. [child1:659] mq_timedsend (279) returned ENOSYS, marking as inactive. [main] 10175 iterations. [F:7781 S:2344 HI:2397] [ 24.610601] [ 24.610743] ================================ [ 24.611083] WARNING: inconsistent lock state [ 24.611437] 5.9.0-rc7-00017-g0f2122045b9462 #5 Not tainted [ 24.611861] -------------------------------- [ 24.612193] inconsistent {SOFTIRQ-ON-W} -> {IN-SOFTIRQ-W} usage. [ 24.612660] ksoftirqd/0/7 [HC0[0]:SC1[3]:HE0:SE0] takes: [ 24.613086] f00ed998 (&xa->xa_lock#4){+.?.}-{2:2}, at: xa_destroy+0x43/0xc1 [ 24.613642] {SOFTIRQ-ON-W} state was registered at: [ 24.614024] lock_acquire+0x20c/0x29b [ 24.614341] _raw_spin_lock+0x21/0x30 [ 24.614636] io_uring_add_task_file+0xe8/0x13a [ 24.614987] io_uring_create+0x535/0x6bd [ 24.615297] io_uring_setup+0x11d/0x136 [ 24.615606] __ia32_sys_io_uring_setup+0xd/0xf [ 24.615977] do_int80_syscall_32+0x53/0x6c [ 24.616306] restore_all_switch_stack+0x0/0xb1 [ 24.616677] irq event stamp: 939881 [ 24.616968] hardirqs last enabled at (939880): [<8105592d>] __local_bh_enable_ip+0x13c/0x145 [ 24.617642] hardirqs last disabled at (939881): [<81b6ace3>] _raw_spin_lock_irqsave+0x1b/0x4e [ 24.618321] softirqs last enabled at (939738): [<81b6c7c8>] __do_softirq+0x3f0/0x45a [ 24.618924] softirqs last disabled at (939743): [<81055741>] run_ksoftirqd+0x35/0x61 [ 24.619521] [ 24.619521] other info that might help us debug this: [ 24.620028] Possible unsafe locking scenario: [ 24.620028] [ 24.620492] CPU0 [ 24.620685] ---- [ 24.620894] lock(&xa->xa_lock#4); [ 24.621168] <Interrupt> [ 24.621381] lock(&xa->xa_lock#4); [ 24.621695] [ 24.621695] *** DEADLOCK *** [ 24.621695] [ 24.622154] 1 lock held by ksoftirqd/0/7: [ 24.622468] #0: 823bfb94 (rcu_callback){....}-{0:0}, at: rcu_process_callbacks+0xc0/0x155 [ 24.623106] [ 24.623106] stack backtrace: [ 24.623454] CPU: 0 PID: 7 Comm: ksoftirqd/0 Not tainted 5.9.0-rc7-00017-g0f2122045b9462 #5 [ 24.624090] Call Trace: [ 24.624284] ? show_stack+0x40/0x46 [ 24.624551] dump_stack+0x1b/0x1d [ 24.624809] print_usage_bug+0x17a/0x185 [ 24.625142] mark_lock+0x11d/0x1db [ 24.625474] ? print_shortest_lock_dependencies+0x121/0x121 [ 24.625905] __lock_acquire+0x41e/0x7bf [ 24.626206] lock_acquire+0x20c/0x29b [ 24.626517] ? xa_destroy+0x43/0xc1 [ 24.626810] ? lock_acquire+0x20c/0x29b [ 24.627110] _raw_spin_lock_irqsave+0x3e/0x4e [ 24.627450] ? xa_destroy+0x43/0xc1 [ 24.627725] xa_destroy+0x43/0xc1 [ 24.627989] __io_uring_free+0x57/0x71 [ 24.628286] ? get_pid+0x22/0x22 [ 24.628544] __put_task_struct+0xf2/0x163 [ 24.628865] put_task_struct+0x1f/0x2a [ 24.629161] delayed_put_task_struct+0xe2/0xe9 [ 24.629509] rcu_process_callbacks+0x128/0x155 [ 24.629860] __do_softirq+0x1a3/0x45a [ 24.630151] run_ksoftirqd+0x35/0x61 [ 24.630443] smpboot_thread_fn+0x304/0x31a [ 24.630763] kthread+0x124/0x139 [ 24.631016] ? sort_range+0x18/0x18 [ 24.631290] ? kthread_create_worker_on_cpu+0x17/0x17 [ 24.631682] ret_from_fork+0x1c/0x28 which is complaining about xa_destroy() grabbing the xa lock in an IRQ disabling fashion, whereas the io_uring uses cases aren't interrupt safe. This is really an xarray issue, since it should not assume the lock type. But for our use case, since we know the xarray is empty at this point, there's no need to actually call xa_destroy(). So just get rid of it. Fixes: 0f2122045b94 ("io_uring: don't rely on weak ->files references") Reported-by: kernel test robot <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-10-08media: dvb-frontends/drxk_hard.c: fix uninitialized variable warningHans Verkuil1-2/+1
drxk_hard.c: In function 'hi_command.constprop': drxk_hard.c:1016:5: warning: 'wait_cmd' may be used uninitialized in this function [-Wmaybe-uninitialized] 1015 | } while ((status < 0) && (retry_count < DRXK_MAX_RETRIES) | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 1016 | && (wait_cmd != 0)); | ^~~~~~~~~~~~~~~~~~ The underlying cause is that the while condition is wrong. It should be: (status < 0 || wait_cmd) && (retry_count < DRXK_MAX_RETRIES) 'wait_cmd' is only valid if '!(status < 0)'. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-10-08media: tvp7002: fix uninitialized variable warningHans Verkuil1-1/+3
tvp7002.c: In function 'tvp7002_g_register': tvp7002.c:691:11: warning: 'val' may be used uninitialized in this function [-Wmaybe-uninitialized] 691 | reg->val = val; | ~~~~~~~~~^~~~~ Just return without setting 'reg' if tvp7002_read returns an error. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-10-08media: s5k5baf: drop 'data' field in struct s5k5baf_fwHans Verkuil1-3/+2
struct s5k5baf_fw ends with this: struct { u16 id; u16 offset; } seq[0]; u16 data[]; }; which is rather confusing and can cause gcc warnings: s5k5baf.c: In function 's5k5baf_load_setfile.isra': s5k5baf.c:390:13: warning: array subscript 65535 is outside the bounds of an interior zero-length array 'struct <anonymous>[0]' [-Wzero-length-bounds] 390 | if (f->seq[i].offset + d <= end) | ~~~~~~^~~ It turns out that 'data[]' is used in only one place and it can easily be replaced by &fw->seq[0].id and 'seq[0]' can be replaced by 'seq[]'. This is both more readable and solved that warnings. Signed-off-by: Hans Verkuil <[email protected]> Cc: Kyungmin Park <[email protected]> Cc: Sylwester Nawrocki <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-10-08net: wireless: nl80211: fix out-of-bounds access in nl80211_del_key()Anant Thazhemadam1-0/+3
In nl80211_parse_key(), key.idx is first initialized as -1. If this value of key.idx remains unmodified and gets returned, and nl80211_key_allowed() also returns 0, then rdev_del_key() gets called with key.idx = -1. This causes an out-of-bounds array access. Handle this issue by checking if the value of key.idx after nl80211_parse_key() is called and return -EINVAL if key.idx < 0. Cc: [email protected] Reported-by: [email protected] Tested-by: [email protected] Signed-off-by: Anant Thazhemadam <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-10-08i2c: meson: fixup rate calculation with filter delayNicolas Belin1-11/+12
Apparently, 15 cycles of the peripheral clock are used by the controller for sampling and filtering. Because this was not known before, the rate calculation is slightly off. Clean up and fix the calculation taking this filtering delay into account. Fixes: 30021e3707a7 ("i2c: add support for Amlogic Meson I2C controller") Signed-off-by: Nicolas Belin <[email protected]> Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-10-08i2c: meson: keep peripheral clock enabledJerome Brunet1-7/+3
SCL rate appears to be different than what is expected. For example, We get 164kHz on i2c3 of the vim3 when 400kHz is expected. This is partially due to the peripheral clock being disabled when the clock is set. Let's keep the peripheral clock on after probe to fix the problem. This does not affect the SCL output which is still gated when i2c is idle. Fixes: 09af1c2fa490 ("i2c: meson: set clock divider in probe instead of setting it for each transfer") Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-10-08i2c: meson: fix clock setting overwriteJerome Brunet1-1/+18
When the slave address is written in do_start(), SLAVE_ADDR is written completely. This may overwrite some setting related to the clock rate or signal filtering. Fix this by writing only the bits related to slave address. To avoid causing unexpected changed, explicitly disable filtering or high/low clock mode which may have been left over by the bootloader. Fixes: 30021e3707a7 ("i2c: add support for Amlogic Meson I2C controller") Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-10-08i2c: imx: Fix reset of I2SR_IAL flagChristian Eggers1-5/+15
According to the "VFxxx Controller Reference Manual" (and the comment block starting at line 97), Vybrid requires writing a one for clearing an interrupt flag. Syncing the method for clearing I2SR_IIF in i2c_imx_isr(). Signed-off-by: Christian Eggers <[email protected]> Fixes: 4b775022f6fd ("i2c: imx: add struct to hold more configurable quirks") Reviewed-by: Uwe Kleine-König <[email protected]> Cc: [email protected] Signed-off-by: Wolfram Sang <[email protected]>
2020-10-08mmc: renesas_sdhi: workaround a regression when reinserting SD cardsWolfram Sang1-0/+13
After the conversions of the reset routines, re-inserting SD cards didn't work anymore. Apply this temporary workaround to have working SD cards during the merge window. The issue will be fixed properly until the final release. Signed-off-by: Wolfram Sang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ulf Hansson <[email protected]>
2020-10-08bpf: Fix scalar32_min_max_or bounds trackingDaniel Borkmann1-4/+4
Simon reported an issue with the current scalar32_min_max_or() implementation. That is, compared to the other 32 bit subreg tracking functions, the code in scalar32_min_max_or() stands out that it's using the 64 bit registers instead of 32 bit ones. This leads to bounds tracking issues, for example: [...] 8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 8: (79) r1 = *(u64 *)(r0 +0) R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 9: (b7) r0 = 1 10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 10: (18) r2 = 0x600000002 12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 12: (ad) if r1 < r2 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: (95) exit 14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 14: (25) if r1 > 0x0 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: (95) exit 16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 16: (47) r1 |= 0 17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x1; 0x700000000),s32_max_value=1,u32_max_value=1) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm [...] The bound tests on the map value force the upper unsigned bound to be 25769803777 in 64 bit (0b11000000000000000000000000000000001) and then lower one to be 1. By using OR they are truncated and thus result in the range [1,1] for the 32 bit reg tracker. This is incorrect given the only thing we know is that the value must be positive and thus 2147483647 (0b1111111111111111111111111111111) at max for the subregs. Fix it by using the {u,s}32_{min,max}_value vars instead. This also makes sense, for example, for the case where we update dst_reg->s32_{min,max}_value in the else branch we need to use the newly computed dst_reg->u32_{min,max}_value as we know that these are positive. Previously, in the else branch the 64 bit values of umin_value=1 and umax_value=32212254719 were used and latter got truncated to be 1 as upper bound there. After the fix the subreg range is now correct: [...] 8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 8: (79) r1 = *(u64 *)(r0 +0) R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 9: (b7) r0 = 1 10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 10: (18) r2 = 0x600000002 12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 12: (ad) if r1 < r2 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: (95) exit 14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 14: (25) if r1 > 0x0 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: (95) exit 16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 16: (47) r1 |= 0 17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm [...] Fixes: 3f50f132d840 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Simon Scannell <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: John Fastabend <[email protected]> Acked-by: Alexei Starovoitov <[email protected]>
2020-10-08x86/mce: Allow for copy_mc_fragile symbol checksum to be generatedBorislav Petkov1-0/+1
Add asm/mce.h to asm/asm-prototypes.h so that that asm symbol's checksum can be generated in order to support CONFIG_MODVERSIONS with it and fix: WARNING: modpost: EXPORT symbol "copy_mc_fragile" [vmlinux] version \ generation failed, symbol will not be versioned. For reference see: 4efca4ed05cb ("kbuild: modversions for EXPORT_SYMBOL() for asm") 334bb7738764 ("x86/kbuild: enable modversions for symbols exported from asm") Fixes: ec6347bb4339 ("x86, powerpc: Rename memcpy_mcsafe() to copy_mc_to_{user, kernel}()") Signed-off-by: Borislav Petkov <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-10-08media: dt-bindings: media: venus: Add an optional power domain for perf votingRajendra Nayak2-2/+10
Venus needs to vote for the performance state of a power domain (cx) to be able to support DVFS. This 'cx' power domain is controlled by rpmh and is a common power domain (scalable) not specific to venus alone. This is optional in the sense that, leaving this power domain out does not really impact the functionality but just makes the platform a little less power efficient. Signed-off-by: Rajendra Nayak <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-10-08media: rcar-vin: rcar-dma: Fix setting VNIS_REG for RAW8 formatsLad Prabhakar1-4/+4
pixelformat in vin priv structure holds V4L2_PIX_FMT_* and not MEDIA_BUS_FMT_* so make sure we check against V4L2_PIX_FMT_* formats while setting the VNIS_REG. Fixes: 8c3e0f67df6c9 ("media: rcar-vin: Extend RAW8 support to all RGB layouts") Signed-off-by: Lad Prabhakar <[email protected]> Reviewed-by: Biju Das <[email protected]> Reviewed-by: Niklas Söderlund <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-10-08media: staging: rkisp1: uapi: Do not use BIT() macroNiklas Söderlund1-22/+22
The BIT() macro is not available to uAPI headers, replace the few usages of it by open coding it. Signed-off-by: Niklas Söderlund <[email protected]> Acked-by: Dafna Hirschfeld <[email protected]> Reviewed-by: Kieran Bingham <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-10-08media: v4l2-mem2mem: Fix spurious v4l2_m2m_buf_doneEzequiel Garcia1-1/+0
A seemingly bad rebase introduced a spurious v4l2_m2m_buf_done, which releases a buffer twice and therefore triggers a noisy warning on each job: WARNING: CPU: 0 PID: 0 at drivers/media/common/videobuf2/videobuf2-core.c:986 vb2_buffer_done+0x208/0x2a0 Fix it by removing the spurious v4l2_m2m_buf_done. Reported-by: Adrian Ratiu <[email protected]> Fixes: 911ea8ec42dea ("media: v4l2-mem2mem: add v4l2_m2m_suspend, v4l2_m2m_resume") Signed-off-by: Ezequiel Garcia <[email protected]> Tested-by: Adrian Ratiu <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-10-08media: usbtv: Fix refcounting mixupOliver Neukum1-1/+2
The premature free in the error path is blocked by V4L refcounting, not USB refcounting. Thanks to Ben Hutchings for review. [v2] corrected attributions Signed-off-by: Oliver Neukum <[email protected]> Fixes: 50e704453553 ("media: usbtv: prevent double free in error case") CC: [email protected] Reported-by: Ben Hutchings <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2020-10-08X.509: Fix modular build of public_key_sm2Herbert Xu4-76/+57
The sm2 code was split out of public_key.c in a way that breaks modular builds. This patch moves the code back into the same file as the original motivation was to minimise ifdefs and that has nothing to do with splitting the code out. Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3...") Reported-by: kernel test robot <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-10-08crypto: xor - Remove unused variable count in do_xor_speedNathan Chancellor1-3/+1
Clang warns: crypto/xor.c:101:4: warning: variable 'count' is uninitialized when used here [-Wuninitialized] count++; ^~~~~ crypto/xor.c:86:17: note: initialize the variable 'count' to silence this warning int i, j, count; ^ = 0 1 warning generated. After the refactoring to use ktime that happened in this function, count is only assigned, never read. Just remove the variable to get rid of the warning. Fixes: c055e3eae0f1 ("crypto: xor - use ktime for template benchmarking") Link: https://github.com/ClangBuiltLinux/linux/issues/1171 Signed-off-by: Nathan Chancellor <[email protected]> Reviewed-by: Douglas Anderson <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-10-08X.509: fix error return value on the failed pathTianjia Zhang1-1/+3
When memory allocation fails, an appropriate return value should be set. Fixes: 215525639631 ("X.509: support OSCCA SM2-with-SM3 certificate verification") Signed-off-by: Tianjia Zhang <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-10-08crypto: bcm - Verify GCM/CCM key length in setkeyHerbert Xu1-1/+14
The setkey function for GCM/CCM algorithms didn't verify the key length before copying the key and subtracting the salt length. This patch delays the copying of the key til after the verification has been done. It also adds checks on the key length to ensure that it's at least as long as the salt. Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver") Cc: <[email protected]> Reported-by: kiyin(尹亮) <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-10-08crypto: qat - drop input parameter from adf_enable_aer()Giovanni Cabiddu5-7/+7
Remove pointer to struct pci_driver from function adf_enable_aer() as it is possible to get it directly from pdev->driver. Signed-off-by: Giovanni Cabiddu <[email protected]> Reviewed-by: Fiona Trahe <[email protected]> Reviewed-by: Wojciech Ziemba <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-10-08crypto: qat - fix function parameters descriptionsGiovanni Cabiddu2-2/+6
Fix description of function parameters. This is to fix the following warnings when compiling the driver with W=1: drivers/crypto/qat/qat_common/adf_sriov.c:133: warning: Function parameter or member 'numvfs' not described in 'adf_sriov_configure' drivers/crypto/qat/qat_common/adf_dev_mgr.c:296: warning: Function parameter or member 'pci_dev' not described in 'adf_devmgr_pci_to_accel_dev' drivers/crypto/qat/qat_common/adf_dev_mgr.c:296: warning: Excess function parameter 'accel_dev' description in 'adf_devmgr_pci_to_accel_dev' Signed-off-by: Giovanni Cabiddu <[email protected]> Reviewed-by: Fiona Trahe <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Herbert Xu <[email protected]>
2020-10-07drm/amdgpu/swsmu: fix ARC build errorsAlex Deucher2-4/+24
We want to use the dev_* functions here rather than the pr_* variants. Switch to using dev_warn() which mirrors what we do on other asics. Fixes the following build errors on ARC: ../drivers/gpu/drm/amd/amdgpu/../powerplay/navi10_ppt.c: In function 'navi10_fill_i2c_req': ../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration] ../drivers/gpu/drm/amd/amdgpu/../powerplay/sienna_cichlid_ppt.c: In function 'sienna_cichlid_fill_i2c_req': ../arch/arc/include/asm/bug.h:24:2: error: implicit declaration of function 'pr_warn'; did you mean 'drm_warn'? [-Werror=implicit-function-declaration] Reported-by: kernel test robot <[email protected]> Cc: Randy Dunlap <[email protected]> Cc: Evan Quan <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: [email protected] Acked-by: Randy Dunlap <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-07drm/amdgpu: fix NULL pointer dereference for RenoirDirk Gouders1-5/+5
Commit c1cf79ca5ced46 ("drm/amdgpu: use IP discovery table for renoir") introduced a NULL pointer dereference when booting with amdgpu.discovery=0, because it removed the call of vega10_reg_base_init() for that case. Fix this by calling that funcion if amdgpu_discovery == 0 in addition to the case that amdgpu_discovery_reg_base_init() failed. Fixes: c1cf79ca5ced46 ("drm/amdgpu: use IP discovery table for renoir") Signed-off-by: Dirk Gouders <[email protected]> Cc: Hawking Zhang <[email protected]> Cc: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-07io_uring: batch account ->req_issue and task struct referencesJens Axboe1-2/+5
Identical to how we handle the ctx reference counts, increase by the batch we're expecting to submit, and handle any slow path residual, if any. The request alloc-and-issue path is very hot, and this makes a noticeable difference by avoiding an two atomic incs for each individual request. Signed-off-by: Jens Axboe <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.