aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-04-14cifs: verify that tcon is valid before dereference in cifs_kill_sbRonnie Sahlberg1-3/+3
On umount, cifs_sb->tlink_tree might contain entries that do not represent a valid tcon. Check the tcon for error before we dereference it. Signed-off-by: Ronnie Sahlberg <[email protected]> Cc: [email protected] Reviewed-by: Shyam Prasad N <[email protected]> Reported-by: Xiaoli Feng <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-04-14Merge tag 'drm-msm-fixes-2022-04-13' of ↵Dave Airlie12-48/+109
https://gitlab.freedesktop.org/drm/msm into drm-fixes Some msm fixes for v5.18. kzalloc return checks, display fix, misc locking and scheduler bug, iommu present removal. Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvuTwx09MKwK68KWXqi4o7LxDGMUz1=Z7xOS+i=OV84Ug@mail.gmail.com
2022-04-14Merge tag 'drm-intel-fixes-2022-04-13' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Correct legacy mmap disabling to use GRAPHICS_VER_FULL Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-14dma-direct: avoid redundant memory sync for swiotlbChao Gao1-1/+2
When we looked into FIO performance with swiotlb enabled in VM, we found swiotlb_bounce() is always called one more time than expected for each DMA read request. It turns out that the bounce buffer is copied to original DMA buffer twice after the completion of a DMA request (one is done by in dma_direct_sync_single_for_cpu(), the other by swiotlb_tbl_unmap_single()). But the content in bounce buffer actually doesn't change between the two rounds of copy. So, one round of copy is redundant. Pass DMA_ATTR_SKIP_CPU_SYNC flag to swiotlb_tbl_unmap_single() to skip the memory copy in it. This fix increases FIO 64KB sequential read throughput in a guest with swiotlb=force by 5.6%. Fixes: 55897af63091 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code") Reported-by: Wang Zhaoyang1 <[email protected]> Reported-by: Gao Liang <[email protected]> Signed-off-by: Chao Gao <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-04-13drm/amd/display: remove dtbclk_ss compensation for dcn316Charlene Liu3-4/+4
[why] dcn316's dtbclk is from non_ss clock source. no compensation required here. Reviewed-by: Chris Park <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-13drm/amdgpu: Enable gfxoff quirk on MacBook ProTomasz Moń1-0/+2
Enabling gfxoff quirk results in perfectly usable graphical user interface on MacBook Pro (15-inch, 2019) with Radeon Pro Vega 20 4 GB. Without the quirk, X server is completely unusable as every few seconds there is gpu reset due to ring gfx timeout. Signed-off-by: Tomasz Moń <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-13drm/amdgpu: Ensure HDA function is suspended before ASIC resetKai-Heng Feng1-6/+12
DP/HDMI audio on AMD PRO VII stops working after S3: [ 149.450391] amdgpu 0000:63:00.0: amdgpu: MODE1 reset [ 149.450395] amdgpu 0000:63:00.0: amdgpu: GPU mode1 reset [ 149.450494] amdgpu 0000:63:00.0: amdgpu: GPU psp mode1 reset [ 149.983693] snd_hda_intel 0000:63:00.1: refused to change power state from D0 to D3hot [ 150.003439] amdgpu 0000:63:00.0: refused to change power state from D0 to D3hot ... [ 155.432975] snd_hda_intel 0000:63:00.1: CORB reset timeout#2, CORBRP = 65535 The offending commit is daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)"). Commit 34452ac3038a7 ("drm/amdgpu: don't use BACO for reset in S3 ") doesn't help, so the issue is something different. Assuming that to make HDA resume to D0 fully realized, it needs to be successfully put to D3 first. And this guesswork proves working, by moving amdgpu_asic_reset() to noirq callback, so it's called after HDA function is in D3. Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)") Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-13drm/amdgpu: fix VCN 3.1.2 firmware nameAlex Deucher1-1/+1
Drop the trailing vcn. Fixes: afc2f276057ea1 ("drm/amdgpu/vcn: add vcn support for vcn 3.1.2") Reviewed-by: James Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-13drm/amd/display: don't ignore alpha property on pre-multiplied modeMelissa Wen2-10/+18
"Pre-multiplied" is the default pixel blend mode for KMS/DRM, as documented in supported_modes of drm_plane_create_blend_mode_property(): https://cgit.freedesktop.org/drm/drm-misc/tree/drivers/gpu/drm/drm_blend.c In this mode, both 'pixel alpha' and 'plane alpha' participate in the calculation, as described by the pixel blend mode formula in KMS/DRM documentation: out.rgb = plane_alpha * fg.rgb + (1 - (plane_alpha * fg.alpha)) * bg.rgb Considering the blend config mechanisms we have in the driver so far, the alpha mode that better fits this blend mode is the _PER_PIXEL_ALPHA_COMBINED_GLOBAL_GAIN, where the value for global_gain is the plane alpha (global_alpha). With this change, alpha property stops to be ignored. It also addresses Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1734 v2: * keep the 8-bit value for global_alpha_value (Nicholas) * correct the logical ordering for combined global gain (Nicholas) * apply to dcn10 too (Nicholas) Signed-off-by: Melissa Wen <[email protected]> Tested-by: Rodrigo Siqueira <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Tested-by: Simon Ser <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-13perf tools: Fix segfault accessing sample_id xyarrayAdrian Hunter1-2/+1
perf_evsel::sample_id is an xyarray which can cause a segfault when accessed beyond its size. e.g. # perf record -e intel_pt// -C 1 sleep 1 Segmentation fault (core dumped) # That is happening because a dummy event is opened to capture text poke events accross all CPUs, however the mmap logic is allocating according to the number of user_requested_cpus. In general, perf sometimes uses the evsel cpus to open events, and sometimes the evlist user_requested_cpus. However, it is not necessary to determine which case is which because the opened event file descriptors are also in an xyarray, the size of whch can be used to correctly allocate the size of the sample_id xyarray, because there is one ID per file descriptor. Note, in the affected code path, perf_evsel fd array is subsequently used to get the file descriptor for the mmap, so it makes sense for the xyarrays to be the same size there. Fixes: d1a177595b3a824c ("libperf: Adopt perf_evlist__mmap()/munmap() from tools/perf") Fixes: 246eba8e9041c477 ("perf tools: Add support for PERF_RECORD_TEXT_POKE") Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] # 5.5+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-13perf stat: Fix error check return value of hashmap__new(), must use IS_ERR()Lv Ruyi1-1/+2
hashmap__new() returns ERR_PTR(-ENOMEM) when it fails, so we should use IS_ERR() to check it in error handling path. Reported-by: Zeal Robot <[email protected]> Signed-off-by: Lv Ruyi <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-13cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_stateSteven Price1-18/+18
Currently the setting of the 'cpu' member of struct cpuhp_cpu_state in cpuhp_create() is too late as it is used earlier in _cpu_up(). If kzalloc_node() in __smpboot_create_thread() fails then the rollback will be done with st->cpu==0 causing CPU0 to be erroneously set to be dying, causing the scheduler to get mightily confused and throw its toys out of the pram. However the cpu number is actually available directly, so simply remove the 'cpu' member and avoid the problem in the first place. Fixes: 2ea46c6fc945 ("cpumask/hotplug: Fix cpu_dying() state tracking") Signed-off-by: Steven Price <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-13vfio/pci: Fix vf_token mechanism when device-specific VF drivers are usedJason Gunthorpe2-50/+76
get_pf_vdev() tries to check if a PF is a VFIO PF by looking at the driver: if (pci_dev_driver(physfn) != pci_dev_driver(vdev->pdev)) { However now that we have multiple VF and PF drivers this is no longer reliable. This means that security tests realted to vf_token can be skipped by mixing and matching different VFIO PCI drivers. Instead of trying to use the driver core to find the PF devices maintain a linked list of all PF vfio_pci_core_device's that we have called pci_enable_sriov() on. When registering a VF just search the list to see if the PF is present and record the match permanently in the struct. PCI core locking prevents a PF from passing pci_disable_sriov() while VF drivers are attached so the VFIO owned PF becomes a static property of the VF. In common cases where vfio does not own the PF the global list remains empty and the VF's pointer is statically NULL. This also fixes a lockdep splat from recursive locking of the vfio_group::device_lock between vfio_device_get_from_name() and vfio_device_get_from_dev(). If the VF and PF share the same group this would deadlock. Fixes: ff53edf6d6ab ("vfio/pci: Split the pci_driver code out of vfio_pci_core.c") Signed-off-by: Jason Gunthorpe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alex Williamson <[email protected]>
2022-04-13dm zone: fix NULL pointer dereference in dm_zone_map_bioMike Snitzer1-21/+28
Commit 0fbb4d93b38b ("dm: add dm_submit_bio_remap interface") changed the alloc_io() function to delay the initialization of struct dm_io's orig_bio member, leaving it NULL until after the dm_io and associated user submitted bio is processed by __split_and_process_bio(). This change causes a NULL pointer dereference in dm_zone_map_bio() when the original user bio is inspected to detect the need for zone append command emulation. Fix this NULL pointer by updating dm_zone_map_bio() to not access ->orig_bio when the same info can be accessed from the clone of the ->orig_bio _before_ any ->map processing. Save off the bio_op() and bio_sectors() for the clone and then use the saved orig_bio_details as needed. Fixes: 0fbb4d93b38b ("dm: add dm_submit_bio_remap interface") Reported-by: Damien Le Moal <[email protected]> Tested-by: Damien Le Moal <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-04-13dm mpath: only use ktime_get_ns() in historical selectorKhazhismel Kumykov1-6/+5
Mixing sched_clock() and ktime_get_ns() usage will give bad results. Switch hst_select_path() from using sched_clock() to ktime_get_ns(). Also rename path_service_time()'s 'sched_now' variable to 'now'. Fixes: 2613eab11996 ("dm mpath: add Historical Service Time Path Selector") Signed-off-by: Khazhismel Kumykov <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-04-13cifs: potential buffer overflow in handling symlinksHarshit Mogalapalli1-0/+3
Smatch printed a warning: arch/x86/crypto/poly1305_glue.c:198 poly1305_update_arch() error: __memcpy() 'dctx->buf' too small (16 vs u32max) It's caused because Smatch marks 'link_len' as untrusted since it comes from sscanf(). Add a check to ensure that 'link_len' is not larger than the size of the 'link_str' buffer. Fixes: c69c1b6eaea1 ("cifs: implement CIFSParseMFSymlink()") Signed-off-by: Harshit Mogalapalli <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-04-13smp: Fix offline cpu check in flush_smp_call_function_queue()Nadav Amit1-1/+1
The check in flush_smp_call_function_queue() for callbacks that are sent to offline CPUs currently checks whether the queue is empty. However, flush_smp_call_function_queue() has just deleted all the callbacks from the queue and moved all the entries into a local list. This checks would only be positive if some callbacks were added in the short time after llist_del_all() was called. This does not seem to be the intention of this check. Change the check to look at the local list to which the entries were moved instead of the queue from which all the callbacks were just removed. Fixes: 8d056c48e4862 ("CPU hotplug, smp: flush any pending IPI callbacks before CPU offline") Signed-off-by: Nadav Amit <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-13dm integrity: fix memory corruption when tag_size is less than digest sizeMikulas Patocka1-2/+5
It is possible to set up dm-integrity in such a way that the "tag_size" parameter is less than the actual digest size. In this situation, a part of the digest beyond tag_size is ignored. In this case, dm-integrity would write beyond the end of the ic->recalc_tags array and corrupt memory. The corruption happened in integrity_recalc->integrity_sector_checksum->crypto_shash_final. Fix this corruption by increasing the tags array so that it has enough padding at the end to accomodate the loop in integrity_recalc() being able to write a full digest size for the last member of the tags array. Cc: [email protected] # v4.19+ Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-04-13io_uring: fix poll error reportingPavel Begunkov1-3/+2
We should not return an error code in req->result in io_poll_check_events(), because it may get mangled and returned as success. Just return the error code directly, the callers will fail the request or proceed accordingly. Fixes: 6bf9c47a3989 ("io_uring: defer file assignment") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/5f03514ee33324dc811fb93df84aee0f695fb044.1649862516.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-04-13io_uring: fix poll file assign deadlockPavel Begunkov1-1/+2
We pass "unlocked" into io_assign_file() in io_poll_check_events(), which can lead to double locking. Fixes: 6bf9c47a3989 ("io_uring: defer file assignment") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/2476d4ae46554324b599ee4055447b105f20a75a.1649862516.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-04-13io_uring: use right issue_flags for splice/teePavel Begunkov1-2/+2
Pass right issue_flags into into io_file_get_fixed() instead of IO_URING_F_UNLOCKED. It's probably not a problem at the moment but let's do it safer. Fixes: 6bf9c47a3989 ("io_uring: defer file assignment") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/7d242daa9df5d776907686977cd29fbceb4a2d8d.1649862516.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-04-13e1000e: Fix possible overflow in LTR decodingSasha Neftin1-2/+2
When we decode the latency and the max_latency, u16 value may not fit the required size and could lead to the wrong LTR representation. Scaling is represented as: scale 0 - 1 (2^(5*0)) = 2^0 scale 1 - 32 (2^(5 *1))= 2^5 scale 2 - 1024 (2^(5 *2)) =2^10 scale 3 - 32768 (2^(5 *3)) =2^15 scale 4 - 1048576 (2^(5 *4)) = 2^20 scale 5 - 33554432 (2^(5 *4)) = 2^25 scale 4 and scale 5 required 20 and 25 bits respectively. scale 6 reserved. Replace the u16 type with the u32 type and allow corrected LTR representation. Cc: [email protected] Fixes: 44a13a5d99c7 ("e1000e: Fix the max snoop/no-snoop latency for 10M") Reported-by: James Hutchinson <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689 Suggested-by: Dima Ruinskiy <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Tested-by: James Hutchinson <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-13igc: Fix suspending when PTM is activeVinicius Costa Gomes1-1/+14
Some mainboard/CPU combinations, in particular, Alder Lake-S with a W680 mainboard, have shown problems (system hangs usually, no kernel logs) with suspend/resume when PCIe PTM is enabled and active. In some cases, it could be reproduced when removing the igc module. The best we can do is to stop PTM dialogs from the downstream/device side before the interface is brought down. PCIe PTM will be re-enabled when the interface is being brought up. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Signed-off-by: Vinicius Costa Gomes <[email protected]> Tested-by: Naama Meir <[email protected]> Acked-by: Paul Menzel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-13spi: atmel-quadspi: Fix the buswidth adjustment between spi-mem and controllerTudor Ambarus1-0/+3
Use the spi_mem_default_supports_op() core helper in order to take into account the buswidth specified by the user in device tree. Cc: <[email protected]> Fixes: 0e6aae08e9ae ("spi: Add QuadSPI driver for Atmel SAMA5D2") Signed-off-by: Tudor Ambarus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-04-13igc: Fix BUG: scheduling while atomicSasha Neftin1-2/+2
Replace usleep_range() method with udelay() method to allow atomic contexts in low-level MDIO access functions. The following issue can be seen by doing the following: $ modprobe -r bonding $ modprobe -v bonding max_bonds=1 mode=1 miimon=100 use_carrier=0 $ ip link set bond0 up $ ifenslave bond0 eth0 eth1 [ 982.357308] BUG: scheduling while atomic: kworker/u64:0/9/0x00000002 [ 982.364431] INFO: lockdep is turned off. [ 982.368824] Modules linked in: bonding sctp ip6_udp_tunnel udp_tunnel mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core nfp tls sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support mxm_wmi dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate intel_uncore pcspkr lpc_ich mei_me ipmi_ssif mei ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci crc32c_intel libata i2c_algo_bit tg3 megaraid_sas igc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: bonding] [ 982.437941] CPU: 25 PID: 9 Comm: kworker/u64:0 Kdump: loaded Tainted: G W --------- - - 4.18.0-348.el8.x86_64+debug #1 [ 982.451333] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 2.7.0 12/005/2017 [ 982.459791] Workqueue: bond0 bond_mii_monitor [bonding] [ 982.465622] Call Trace: [ 982.468355] dump_stack+0x8e/0xd0 [ 982.472056] __schedule_bug.cold.60+0x3a/0x60 [ 982.476919] __schedule+0x147b/0x1bc0 [ 982.481007] ? firmware_map_remove+0x16b/0x16b [ 982.485967] ? hrtimer_fixup_init+0x40/0x40 [ 982.490625] schedule+0xd9/0x250 [ 982.494227] schedule_hrtimeout_range_clock+0x10d/0x2c0 [ 982.500058] ? hrtimer_nanosleep_restart+0x130/0x130 [ 982.505598] ? hrtimer_init_sleeper_on_stack+0x90/0x90 [ 982.511332] ? usleep_range+0x88/0x130 [ 982.515514] ? recalibrate_cpu_khz+0x10/0x10 [ 982.520279] ? ktime_get+0xab/0x1c0 [ 982.524175] ? usleep_range+0x88/0x130 [ 982.528355] usleep_range+0xdd/0x130 [ 982.532344] ? console_conditional_schedule+0x30/0x30 [ 982.537987] ? igc_put_hw_semaphore+0x17/0x60 [igc] [ 982.543432] igc_read_phy_reg_gpy+0x111/0x2b0 [igc] [ 982.548887] igc_phy_has_link+0xfa/0x260 [igc] [ 982.553847] ? igc_get_phy_id+0x210/0x210 [igc] [ 982.558894] ? lock_acquire+0x34d/0x890 [ 982.563187] ? lock_downgrade+0x710/0x710 [ 982.567659] ? rcu_read_unlock+0x50/0x50 [ 982.572039] igc_check_for_copper_link+0x106/0x210 [igc] [ 982.577970] ? igc_config_fc_after_link_up+0x840/0x840 [igc] [ 982.584286] ? rcu_read_unlock+0x50/0x50 [ 982.588661] ? lock_release+0x591/0xb80 [ 982.592939] ? lock_release+0x591/0xb80 [ 982.597220] igc_has_link+0x113/0x330 [igc] [ 982.601887] ? lock_downgrade+0x710/0x710 [ 982.606362] igc_ethtool_get_link+0x6d/0x90 [igc] [ 982.611614] bond_check_dev_link+0x131/0x2c0 [bonding] [ 982.617350] ? bond_time_in_interval+0xd0/0xd0 [bonding] [ 982.623277] ? rcu_read_lock_held+0x62/0xc0 [ 982.627944] ? rcu_read_lock_sched_held+0xe0/0xe0 [ 982.633198] bond_mii_monitor+0x314/0x2500 [bonding] [ 982.638738] ? lock_contended+0x880/0x880 [ 982.643214] ? bond_miimon_link_change+0xa0/0xa0 [bonding] [ 982.649336] ? lock_acquire+0x34d/0x890 [ 982.653615] ? lock_downgrade+0x710/0x710 [ 982.658089] ? debug_object_deactivate+0x221/0x340 [ 982.663436] ? rcu_read_unlock+0x50/0x50 [ 982.667811] ? debug_print_object+0x2b0/0x2b0 [ 982.672672] ? __switch_to_asm+0x41/0x70 [ 982.677049] ? __switch_to_asm+0x35/0x70 [ 982.681426] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.686288] ? trace_hardirqs_on+0x20/0x195 [ 982.690956] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.695818] process_one_work+0x8f0/0x1770 [ 982.700390] ? pwq_dec_nr_in_flight+0x320/0x320 [ 982.705443] ? debug_show_held_locks+0x50/0x50 [ 982.710403] worker_thread+0x87/0xb40 [ 982.714489] ? process_one_work+0x1770/0x1770 [ 982.719349] kthread+0x344/0x410 [ 982.722950] ? kthread_insert_work_sanity_check+0xd0/0xd0 [ 982.728975] ret_from_fork+0x3a/0x50 Fixes: 5586838fe9ce ("igc: Add code for PHY support") Reported-by: Corinna Vinschen <[email protected]> Suggested-by: Dima Ruinskiy <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Corinna Vinschen <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-13igc: Fix infinite loop in release_swfw_syncSasha Neftin1-2/+9
An infinite loop may occur if we fail to acquire the HW semaphore, which is needed for resource release. This will typically happen if the hardware is surprise-removed. At this stage there is nothing to do, except log an error and quit. Fixes: c0071c7aa5fe ("igc: Add HW initialization code") Suggested-by: Dima Ruinskiy <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-13nfc: nci: add flush_workqueue to prevent uafLin Ma1-0/+4
Our detector found a concurrent use-after-free bug when detaching an NCI device. The main reason for this bug is the unexpected scheduling between the used delayed mechanism (timer and workqueue). The race can be demonstrated below: Thread-1 Thread-2 | nci_dev_up() | nci_open_device() | __nci_request(nci_reset_req) | nci_send_cmd | queue_work(cmd_work) nci_unregister_device() | nci_close_device() | ... del_timer_sync(cmd_timer)[1] | ... | Worker nci_free_device() | nci_cmd_work() kfree(ndev)[3] | mod_timer(cmd_timer)[2] In short, the cleanup routine thought that the cmd_timer has already been detached by [1] but the mod_timer can re-attach the timer [2], even it is already released [3], resulting in UAF. This UAF is easy to trigger, crash trace by POC is like below [ 66.703713] ================================================================== [ 66.703974] BUG: KASAN: use-after-free in enqueue_timer+0x448/0x490 [ 66.703974] Write of size 8 at addr ffff888009fb7058 by task kworker/u4:1/33 [ 66.703974] [ 66.703974] CPU: 1 PID: 33 Comm: kworker/u4:1 Not tainted 5.18.0-rc2 #5 [ 66.703974] Workqueue: nfc2_nci_cmd_wq nci_cmd_work [ 66.703974] Call Trace: [ 66.703974] <TASK> [ 66.703974] dump_stack_lvl+0x57/0x7d [ 66.703974] print_report.cold+0x5e/0x5db [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] kasan_report+0xbe/0x1c0 [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] enqueue_timer+0x448/0x490 [ 66.703974] __mod_timer+0x5e6/0xb80 [ 66.703974] ? mark_held_locks+0x9e/0xe0 [ 66.703974] ? try_to_del_timer_sync+0xf0/0xf0 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x17b/0x410 [ 66.703974] ? queue_work_on+0x61/0x80 [ 66.703974] ? lockdep_hardirqs_on+0xbf/0x130 [ 66.703974] process_one_work+0x8bb/0x1510 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 66.703974] ? pwq_dec_nr_in_flight+0x230/0x230 [ 66.703974] ? rwlock_bug.part.0+0x90/0x90 [ 66.703974] ? _raw_spin_lock_irq+0x41/0x50 [ 66.703974] worker_thread+0x575/0x1190 [ 66.703974] ? process_one_work+0x1510/0x1510 [ 66.703974] kthread+0x2a0/0x340 [ 66.703974] ? kthread_complete_and_exit+0x20/0x20 [ 66.703974] ret_from_fork+0x22/0x30 [ 66.703974] </TASK> [ 66.703974] [ 66.703974] Allocated by task 267: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] __kasan_kmalloc+0x81/0xa0 [ 66.703974] nci_allocate_device+0xd3/0x390 [ 66.703974] nfcmrvl_nci_register_dev+0x183/0x2c0 [ 66.703974] nfcmrvl_nci_uart_open+0xf2/0x1dd [ 66.703974] nci_uart_tty_ioctl+0x2c3/0x4a0 [ 66.703974] tty_ioctl+0x764/0x1310 [ 66.703974] __x64_sys_ioctl+0x122/0x190 [ 66.703974] do_syscall_64+0x3b/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 66.703974] [ 66.703974] Freed by task 406: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] kasan_set_track+0x21/0x30 [ 66.703974] kasan_set_free_info+0x20/0x30 [ 66.703974] __kasan_slab_free+0x108/0x170 [ 66.703974] kfree+0xb0/0x330 [ 66.703974] nfcmrvl_nci_unregister_dev+0x90/0xd0 [ 66.703974] nci_uart_tty_close+0xdf/0x180 [ 66.703974] tty_ldisc_kill+0x73/0x110 [ 66.703974] tty_ldisc_hangup+0x281/0x5b0 [ 66.703974] __tty_hangup.part.0+0x431/0x890 [ 66.703974] tty_release+0x3a8/0xc80 [ 66.703974] __fput+0x1f0/0x8c0 [ 66.703974] task_work_run+0xc9/0x170 [ 66.703974] exit_to_user_mode_prepare+0x194/0x1a0 [ 66.703974] syscall_exit_to_user_mode+0x19/0x50 [ 66.703974] do_syscall_64+0x48/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0xae To fix the UAF, this patch adds flush_workqueue() to ensure the nci_cmd_work is finished before the following del_timer_sync. This combination will promise the timer is actually detached. Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Signed-off-by: Lin Ma <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-13spi: cadence-quadspi: fix incorrect supports_op() return valueMatthias Schiffer1-2/+17
Since the conversion to spi-mem, the driver advertised support for various operations that cqspi_set_protocol() was never expected to handle correctly - in particuar all non-DTR operations with command or address buswidth > 1. For DTR, all operations except for 8-8-8 would fail, as cqspi_set_protocol() returns -EINVAL. In non-DTR mode, this resulted in data corruption for SPI-NOR flashes that support such operations. As a minimal fix that can be backported to stable kernels, simply disallow the unsupported operations again to avoid this issue. Fixes: a314f6367787 ("mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework") Signed-off-by: Matthias Schiffer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-04-13net: dsa: realtek: don't parse compatible string for RTL8366SAlvin Šipraga1-5/+0
This switch is not even supported, but if someone were to actually put this compatible string "realtek,rtl8366s" in their device tree, they would be greeted with a kernel panic because the probe function would dereference NULL. So let's just remove it. Link: https://lore.kernel.org/all/CACRpkdYdKZs0WExXc3=0yPNOwP+oOV60HRz7SRoGjZvYHaT=1g@mail.gmail.com/ Signed-off-by: Alvin Šipraga <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-13net: dsa: realtek: fix Kconfig to assure consistent driver linkageAlvin Šipraga1-9/+21
The kernel test robot reported a build failure: or1k-linux-ld: drivers/net/dsa/realtek/realtek-smi.o:(.rodata+0x16c): undefined reference to `rtl8366rb_variant' ... with the following build configuration: CONFIG_NET_DSA_REALTEK=y CONFIG_NET_DSA_REALTEK_SMI=y CONFIG_NET_DSA_REALTEK_RTL8365MB=y CONFIG_NET_DSA_REALTEK_RTL8366RB=m The problem here is that the realtek-smi interface driver gets built-in, while the rtl8366rb switch subdriver gets built as a module, hence the symbol rtl8366rb_variant is not reachable when defining the OF device table in the interface driver. The Kconfig dependencies don't help in this scenario because they just say that the subdriver(s) depend on at least one interface driver. In fact, the subdrivers don't depend on the interface drivers at all, and can even be built even in their absence. Somewhat strangely, the interface drivers can also be built in the absence of any subdriver, BUT, if a subdriver IS enabled, then it must be reachable according to the linkage of the interface driver: effectively what the IS_REACHABLE() macro achieves. If it is not reachable, the above kind of linker error will be observed. Rather than papering over the above build error by simply using IS_REACHABLE(), we can do a little better and admit that it is actually the interface drivers that have a dependency on the subdrivers. So this patch does exactly that. Specifically, we ensure that: 1. The interface drivers' Kconfig symbols must have a value no greater than the value of any subdriver Kconfig symbols. 2. The subdrivers should by default enable both interface drivers, since most users probably want at least one of them; those interface drivers can be explicitly disabled however. What this doesn't do is prevent a user from building only a subdriver, without any interface driver. To that end, add an additional line of help in the menu to guide users in the right direction. Link: https://lore.kernel.org/all/[email protected]/ Reported-by: kernel test robot <[email protected]> Fixes: aac94001067d ("net: dsa: realtek: add new mdio interface for drivers") Signed-off-by: Alvin Šipraga <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-13spi: intel: Add support for Raptor Lake-S SPI serial flashMika Westerberg1-0/+1
Intel Raptor Lake-S has the same SPI serial flash controller as Alder Lake-P. Add Raptor Lake-S PCI ID to the driver list of supported devices. Signed-off-by: Mika Westerberg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-04-13Merge tag 'wireless-2022-04-13' of ↵David S. Miller9-29/+46
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v5.18 First set of fixes for v5.18. Maintainers file updates, two compilation warning fixes, one revert for ath11k and smaller fixes to drivers and stack. All the usual stuff. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-04-13random: make random_get_entropy() return an unsigned longJason A. Donenfeld2-14/+8
Some implementations were returning type `unsigned long`, while others that fell back to get_cycles() were implicitly returning a `cycles_t` or an untyped constant int literal. That makes for weird and confusing code, and basically all code in the kernel already handled it like it was an `unsigned long`. I recently tried to handle it as the largest type it could be, a `cycles_t`, but doing so doesn't really help with much. Instead let's just make random_get_entropy() return an unsigned long all the time. This also matches the commonly used `arch_get_random_long()` function, so now RDRAND and RDTSC return the same sized integer, which means one can fallback to the other more gracefully. Cc: Dominik Brodowski <[email protected]> Cc: Theodore Ts'o <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]>
2022-04-13random: allow partial reads if later user copies failJason A. Donenfeld1-10/+12
Rather than failing entirely if a copy_to_user() fails at some point, instead we should return a partial read for the amount that succeeded prior, unless none succeeded at all, in which case we return -EFAULT as before. This makes it consistent with other reader interfaces. For example, the following snippet for /dev/zero outputs "4" followed by "1": int fd; void *x = mmap(NULL, 4096, PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); assert(x != MAP_FAILED); fd = open("/dev/zero", O_RDONLY); assert(fd >= 0); printf("%zd\n", read(fd, x, 4)); printf("%zd\n", read(fd, x + 4095, 4)); close(fd); This brings that same standard behavior to the various RNG reader interfaces. While we're at it, we can streamline the loop logic a little bit. Suggested-by: Linus Torvalds <[email protected]> Cc: Jann Horn <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]>
2022-04-13net: ftgmac100: access hardware register after clock readyDylan Hung1-5/+5
AST2600 MAC register 0x58 is writable only when the MAC clock is enabled. Usually, the MAC clock is enabled by the bootloader so register 0x58 is set normally when the bootloader is involved. To make ast2600 ftgmac100 work without the bootloader, postpone the register write until the clock is ready. Fixes: 137d23cea1c0 ("net: ftgmac100: Fix Aspeed ast2600 TX hang issue") Signed-off-by: Dylan Hung <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-13Revert "net: dsa: setup master before ports"Vladimir Oltean1-13/+10
This reverts commit 11fd667dac315ea3f2469961f6d2869271a46cae. dsa_slave_change_mtu() updates the MTU of the DSA master and of the associated CPU port, but only if it detects a change to the master MTU. The blamed commit in the Fixes: tag below addressed a regression where dsa_slave_change_mtu() would return early and not do anything due to ds->ops->port_change_mtu() not being implemented. However, that commit also had the effect that the master MTU got set up to the correct value by dsa_master_setup(), but the associated CPU port's MTU did not get updated. This causes breakage for drivers that rely on the ->port_change_mtu() DSA call to account for the tagging overhead on the CPU port, and don't set up the initial MTU during the setup phase. Things actually worked before because they were in a fragile equilibrium where dsa_slave_change_mtu() was called before dsa_master_setup() was. So dsa_slave_change_mtu() could actually detect a change and update the CPU port MTU too. Restore the code to the way things used to work by reverting the reorder of dsa_tree_setup_master() and dsa_tree_setup_ports(). That change did not have a concrete motivation going for it anyway, it just looked better. Fixes: 066dfc429040 ("Revert "net: dsa: stop updating master MTU from master.c"") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-13macvlan: Fix leaking skb in source mode with nodst optionMartin Willi1-2/+6
The MACVLAN receive handler clones skbs to all matching source MACVLAN interfaces, before it passes the packet along to match on destination based MACVLANs. When using the MACVLAN nodst mode, passing the packet to destination based MACVLANs is omitted and the handler returns with RX_HANDLER_CONSUMED. However, the passed skb is not freed, leaking for any packet processed with the nodst option. Properly free the skb when consuming packets to fix that leak. Fixes: 427f0c8c194b ("macvlan: Add nodst option to macvlan type source") Signed-off-by: Martin Willi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-13arch: xtensa: platforms: Fix deadlock in rs_close()Duoming Zhou1-8/+0
There is a deadlock in rs_close(), which is shown below: (Thread 1) | (Thread 2) | rs_open() rs_close() | mod_timer() spin_lock_bh() //(1) | (wait a time) ... | rs_poll() del_timer_sync() | spin_lock() //(2) (wait timer to stop) | ... We hold timer_lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need timer_lock in position (2) of thread 2. As a result, rs_close() will block forever. This patch deletes the redundant timer_lock in order to prevent the deadlock. Because there is no race condition between rs_close, rs_open and rs_poll. Signed-off-by: Duoming Zhou <[email protected]> Message-Id: <[email protected]> Signed-off-by: Max Filippov <[email protected]>
2022-04-13xtensa: patch_text: Fixup last cpu should be masterGuo Ren1-1/+1
These patch_text implementations are using stop_machine_cpuslocked infrastructure with atomic cpu_count. The original idea: When the master CPU patch_text, the others should wait for it. But current implementation is using the first CPU as master, which couldn't guarantee the remaining CPUs are waiting. This patch changes the last CPU as the master to solve the potential risk. Fixes: 64711f9a47d4 ("xtensa: implement jump_label support") Signed-off-by: Guo Ren <[email protected]> Signed-off-by: Guo Ren <[email protected]> Reviewed-by: Max Filippov <[email protected]> Reviewed-by: Masami Hiramatsu <[email protected]> Cc: <[email protected]> Message-Id: <[email protected]> Signed-off-by: Max Filippov <[email protected]>
2022-04-13power: supply: Reset err after not finding static batteryYassine Oudjana1-0/+6
Otherwise power_supply_get_battery_info always returns -ENODEV on devices that do not have a static battery, even when a simple battery is found. Fixes: c8aee3f41cb8 ("power: supply: Static data for Samsung batteries") Signed-off-by: Yassine Oudjana <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2022-04-13power: supply: samsung-sdi-battery: Add missing charge restart voltagesLinus Walleij1-0/+2
Two of the batteries were missing charging restart voltages, meaning they can drain if the algorithm relies on restarting charging at this voltage. Fix it up. Fixes: c8aee3f41cb8 ("power: supply: Static data for Samsung batteries") Signed-off-by: Linus Walleij <[email protected]> Signed-off-by: Sebastian Reichel <[email protected]>
2022-04-13perf tools: Fix misleading add event PMU debug messageAdrian Hunter1-2/+3
Fix incorrect debug message: Attempting to add event pmu 'intel_pt' with '' that may result in non-fatal errors which always appears with perf record -vv and intel_pt e.g. perf record -vv -e intel_pt//u uname The message is incorrect because there will never be non-fatal errors. Suppress the message if the PMU is 'selectable' i.e. meant to be selected directly as an event. Fixes: 4ac22b484d4c79e8 ("perf parse-events: Make add PMU verbose output clearer") Signed-off-by: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-13esp: limit skb_page_frag_refill use to a single pageSabrina Dubroca3-8/+4
Commit ebe48d368e97 ("esp: Fix possible buffer overflow in ESP transformation") tried to fix skb_page_frag_refill usage in ESP by capping allocsize to 32k, but that doesn't completely solve the issue, as skb_page_frag_refill may return a single page. If that happens, we will write out of bounds, despite the check introduced in the previous patch. This patch forces COW in cases where we would end up calling skb_page_frag_refill with a size larger than a page (first in esp_output_head with tailen, then in esp_output_tail with skb->data_len). Fixes: cac2661c53f3 ("esp4: Avoid skb_cow_data whenever possible") Fixes: 03e2a30f6a27 ("esp6: Avoid skb_cow_data whenever possible") Signed-off-by: Sabrina Dubroca <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2022-04-13ALSA: usb-audio: Limit max buffer and period sizes per timeTakashi Iwai1-87/+14
In the previous fix, we increased the max buffer bytes from 1MB to 4MB so that we can use bigger buffers for the modern HiFi devices with higher rates, more channels and wider formats. OTOH, extending this has a concern that too big buffer is allowed for the lower rates, less channels and narrower formats; when an application tries to allocate as big buffer as possible, it'll lead to unexpectedly too huge size. Also, we had a problem about the inconsistent max buffer and period bytes for the implicit feedback mode when both streams have different channels. This was fixed by the (relatively complex) patch to reduce the max buffer and period bytes accordingly. This is an alternative fix for those, a patch to kill two birds with one stone (*): instead of increasing the max buffer bytes blindly and applying the reduction per channels, we simply use the hw constraints for the buffer and period "time". Meanwhile the max buffer and period bytes are set unlimited instead. Since the inconsistency of buffer (and period) bytes comes from the difference of the channels in the tied streams, as long as we care only about the buffer (and period) time, it doesn't matter; the buffer time is same for different channels, although we still allow higher buffer size. Similarly, this will allow more buffer bytes for HiFi devices while it also keeps the reasonable size for the legacy devices, too. As of this patch, the max period and buffer time are set to 1 and 2 seconds, which should be large enough for all possible use cases. (*) No animals were harmed in the making of this patch. Fixes: 98c27add5d96 ("ALSA: usb-audio: Cap upper limits of buffer/period bytes for implicit fb") Fixes: fee2ec8cceb3 ("ALSA: usb-audio: Increase max buffer size") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-04-13ALSA: memalloc: Add fallback SG-buffer allocations for x86Takashi Iwai2-1/+115
The recent change for memory allocator replaced the SG-buffer handling helper for x86 with the standard non-contiguous page handler. This works for most cases, but there is a corner case I obviously overlooked, namely, the fallback of non-contiguous handler without IOMMU. When the system runs without IOMMU, the core handler tries to use the continuous pages with a single SGL entry. It works nicely for most cases, but when the system memory gets fragmented, the large allocation may fail frequently. Ideally the non-contig handler could deal with the proper SG pages, it's cumbersome to extend for now. As a workaround, here we add new types for (minimalistic) SG allocations, instead, so that the allocator falls back to those types automatically when the allocation with the standard API failed. BTW, one better (but pretty minor) improvement from the previous SG-buffer code is that this provides the proper mmap support without the PCM's page fault handling. Fixes: 2c95b92ecd92 ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)") BugLink: https://gitlab.freedesktop.org/pipewire/pipewire/-/issues/2272 BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1198248 Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-04-12Merge tag 'hardening-v5.18-rc3' of ↵Linus Torvalds2-17/+31
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull hardening fixes from Kees Cook: - latent_entropy: Use /dev/urandom instead of small GCC seed (Jason Donenfeld) - uapi/stddef.h: add missed include guards (Tadeusz Struk) * tag 'hardening-v5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: latent_entropy: use /dev/urandom uapi/linux/stddef.h: Add include guards
2022-04-12Merge tag 'nfsd-5.18-1' of ↵Linus Torvalds6-26/+36
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux Pull nfsd fixes from Chuck Lever: - Fix a write performance regression - Fix crashes during request deferral on RDMA transports * tag 'nfsd-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: SUNRPC: Fix the svc_deferred_event trace class SUNRPC: Fix NFSD's request deferral on RDMA transports nfsd: Clean up nfsd_file_put() nfsd: Fix a write performance regression SUNRPC: Return true/false (not 1/0) from bool functions
2022-04-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds31-124/+357
Pull kvm fixes from Paolo Bonzini: "x86: - Miscellaneous bugfixes - A small cleanup for the new workqueue code - Documentation syntax fix RISC-V: - Remove hgatp zeroing in kvm_arch_vcpu_put() - Fix alignment of the guest_hang() in KVM selftest - Fix PTE A and D bits in KVM selftest - Missing #include in vcpu_fp.c ARM: - Some PSCI fixes after introducing PSCIv1.1 and SYSTEM_RESET2 - Fix the MMU write-lock not being taken on THP split - Fix mixed-width VM handling - Fix potential UAF when debugfs registration fails - Various selftest updates for all of the above" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (24 commits) KVM: x86: hyper-v: Avoid writing to TSC page without an active vCPU KVM: SVM: Do not activate AVIC for SEV-enabled guest Documentation: KVM: Add SPDX-License-Identifier tag selftests: kvm: add tsc_scaling_sync to .gitignore RISC-V: KVM: include missing hwcap.h into vcpu_fp KVM: selftests: riscv: Fix alignment of the guest_hang() function KVM: selftests: riscv: Set PTE A and D bits in VS-stage page table RISC-V: KVM: Don't clear hgatp CSR in kvm_arch_vcpu_put() selftests: KVM: Free the GIC FD when cleaning up in arch_timer selftests: KVM: Don't leak GIC FD across dirty log test iterations KVM: Don't create VM debugfs files outside of the VM directory KVM: selftests: get-reg-list: Add KVM_REG_ARM_FW_REG(3) KVM: avoid NULL pointer dereference in kvm_dirty_ring_push KVM: arm64: selftests: Introduce vcpu_width_config KVM: arm64: mixed-width check should be skipped for uninitialized vCPUs KVM: arm64: vgic: Remove unnecessary type castings KVM: arm64: Don't split hugepages outside of MMU write lock KVM: arm64: Drop unneeded minor version check from PSCI v1.x handler KVM: arm64: Actually prevent SMC64 SYSTEM_RESET2 from AArch32 KVM: arm64: Generally disallow SMC64 for AArch32 guests ...
2022-04-12Merge tag 'media/v5.18-2' of ↵Linus Torvalds3-12/+13
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a regression fix for si2157 - a Kconfig dependency fix for imx-mipi-csis - fix the rockchip/rga driver probing logic * tag 'media/v5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: si2157: unknown chip version Si2147-A30 ROM 0x50 media: platform: imx-mipi-csis: Add dependency on VIDEO_DEV media: rockchip/rga: do proper error checking in probe
2022-04-12stat: fix inconsistency between struct stat and struct compat_statMikulas Patocka2-13/+12
struct stat (defined in arch/x86/include/uapi/asm/stat.h) has 32-bit st_dev and st_rdev; struct compat_stat (defined in arch/x86/include/asm/compat.h) has 16-bit st_dev and st_rdev followed by a 16-bit padding. This patch fixes struct compat_stat to match struct stat. [ Historical note: the old x86 'struct stat' did have that 16-bit field that the compat layer had kept around, but it was changes back in 2003 by "struct stat - support larger dev_t": https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git/commit/?id=e95b2065677fe32512a597a79db94b77b90c968d and back in those days, the x86_64 port was still new, and separate from the i386 code, and had already picked up the old version with a 16-bit st_dev field ] Note that we can't change compat_dev_t because it is used by compat_loop_info. Also, if the st_dev and st_rdev values are 32-bit, we don't have to use old_valid_dev to test if the value fits into them. This fixes -EOVERFLOW on filesystems that are on NVMe because NVMe uses the major number 259. Signed-off-by: Mikulas Patocka <[email protected]> Cc: Andreas Schwab <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Christoph Hellwig <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.