aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2006-02-17[PATCH] trivial: fix spelling errors in KconfigsJon Mason5-17/+17
This patch corrects a few spelling and grammar errors found in drivers/net Signed-off-by: Jon Mason <jdmason@us.ibm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17[PATCH] ipw2200: Fix WPA network selection problemStefan Rompf1-2/+2
Do not avoid APs with wpa_ie or rsn_ie if !ieee->wpa_enabled There are broken APs out there that fill these elements even though encryption is disnabled. Also, this breaks legit WEP to WPA migration scenarious. We add a checking to prohibite WPA configured STA trying to associate with non-WPA supported APs. Signed-off-by: Stefan Rompf <stefan@loplof.de> Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17[PATCH] ieee80211: Use IWEVGENIE to set WPA IEZhu Yi1-22/+10
It replaces returning WPA/RSN IEs as custom events with returning them as IWEVGENIE events. I have tested that it returns proper information with both Xsupplicant, and the latest development version of the Linux wireless tools. Signed-off-by: Chris Hessing <Chris.Hessing@utah.edu> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17[PATCH] ipw2200: add monitor and qos entries to KconfigAndreas Happe1-0/+13
I have made a stupid copy&paste error: QoS option is named IPW_QOS not IPW2200_MONITOR. Spotted by Daniel Paschka, thanks. Add the following config entries for the ipw2200 driver to drivers/net/wireless/Kconfig * IPW2200_MONITOR enables Monitor mode * IPW_QOS enables QoS feature - this is under development right now, so it depends upon EXPERIMENTAL Signed-off-by: Andreas Happe <andreashappe@snikt.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17[PATCH] wireless/atmel: convert constants to ieee80211 layer equivalentsDan Williams1-74/+36
This patch converts the Atmel driver-only IEEE 802.11 constants to their equivalents from the kernel's ieee80211 layer headers. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17[PATCH] let IPW2{1,2}00 select IEEE80211Jan Niehusmann1-2/+4
This patch makes the IPW2100 and IPW2200 options available in the configuration menu even if IEEE80211 has not been selected before. This behaviour is more intuitive for people which are not familiar with the driver internals. The suggestion for this change was made by Alejandro Bonilla Beeche. Signed-off-by: Jan Niehusmann <jan@gondor.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17Merge branch 'upstream-fixes'John W. Linville1-39/+59
2006-02-17Merge branch 'upstream' of ↵John W. Linville92-2319/+2129
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2006-02-17[PATCH] wireless/atmel: fix Open System authentication process bugsDan Williams1-10/+27
This patch fixes a number of bugs in the authentication process: 1) When falling back to Shared Key authentication mode from Open System, a missing 'return' would cause the auth request to be sent, but would drop the card into Management Error state. When falling back, the driver should also indicate that it is switching to Shared Key mode by setting exclude_unencrypted. 2) Initial authentication modes were apparently wrong in some cases, causing the driver to attempt Shared Key authentication mode when in fact the access point didn't support that mode or even had WEP disabled. The driver should set the correct initial authentication mode based on wep_is_on and exclude_unencrypted. 3) Authentication response packets from the access point in Open System mode were getting ignored because the driver was expecting the sequence number of a Shared Key mode response. The patch separates the OS and SK mode handling to provide the correct behavior. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17[PATCH] wireless/atmel: fix setting TX key only in ENCODEEXTDan Williams1-29/+32
The previous patch that added ENCODEEXT and AUTH support to the atmel driver contained a slight error which would cause just setting the TX key index to also set the encryption key again. This patch allows any combination of setting the TX key index and setting an encryption key. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-16Merge branch 'upstream-linus' of git://oss.oracle.com/home/sourcebo/git/ocfs2Linus Torvalds7-11/+88
2006-02-16Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds48-812/+2388
2006-02-16[PATCH] ocfs2: detach from heartbeat events before freeing mleKurt Hackel1-1/+6
Signed-off-by: Kurt Hackel <Kurt.Hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-16[PATCH] ocfs2: only checkpoint journal when asked toMark Fasheh2-6/+3
Disable automatic checkpointing of the journal - this is a relic from older ocfs2 days. Worth quite a bit of performance on longer running single node tests. Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-16[PATCH] ocfs2: manually grant remote recovery lockKurt Hackel1-0/+11
* fix a hang in recovery that occurred in dlmlock_remote. the $RECOVERY lock was never moved to the granted queue even after getting DLM_NORMAL back from the master node. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-16[PATCH] ocfs2: add dlm_wait_for_node_deathKurt Hackel4-1/+40
* add dlm_wait_for_node_death function to be used after receiving a network error. this will wait for the given timeout to allow the heartbeat callbacks to update the domain map. without this, some paths may spin and consume enough cpu that the heartbeat gets starved and never updates. Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-16[PATCH] ocfs2: fix release of ast never reservedKurt Hackel1-3/+4
* fix a bug in dlm_convert_lock_handler where dlm_lockres_release_ast was being called even if no ast was ever reserved Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-16[PATCH] ocfs2: recheck recovery state after getting lockKurt Hackel1-0/+24
* after successfully taking the $RECOVERY lock in EX mode, recheck to make sure that recovery has not already begun or completed on another node Signed-off-by: Kurt Hackel <kurt.hackel@oracle.com> Signed-off-by: Mark Fasheh <mark.fasheh@oracle.com>
2006-02-16[PATCH] Fix over-zealous tag clearing in radix_tree_deleteNeilBrown1-4/+6
If a tag is set for a node being deleted from a radix_tree, then that tag gets cleared from the parent of the node, even if it is set for some siblings of the node begin deleted. This patch changes the logic to include a test for any_tag_set similar to the logic a little futher down. Care is taken to ensure that 'nr_cleared_tags' remains equals to the number of entries in the 'tags' array which are set to '0' (which means that this tag is not set in the tree below pathp->node, and should be cleared at pathp->node and possibly above. [ Nick says: "Linus FYI, I was able to modify the radix tree test harness to catch the bug and can no longer trigger it after the fix. Resulting code passes all other harness tests as well of course." ] Signed-off-by: Neil Brown <neilb@suse.de> Acked-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15Merge master.kernel.org:/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds8-67/+109
2006-02-15Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds14-27/+63
2006-02-15[PATCH] mmconfig: add kernel parameter documentationBjorn Helgaas1-0/+2
Mention the "pci=nommconf" option in kernel-parameters.txt. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15[PATCH] swsusp: nuke noisy messageAndrew Morton1-3/+1
I get about 88 squillion of these when suspending an old ad450nx server. Cc: Pavel Roskin <proski@gnu.org> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15[PATCH] x86_64: early initialization of cpu_to_nodeDaniel Yeisley1-1/+1
The early initialization of cpu_to_node code as it is now only updates the cpu_to_node array, and does not update cpu_pda()->nodemember. This will cause numa_node_id() to return 0 on systems where CPU 0 is not on Node 0. This leads to a kernel panic in slab.c. I've tested the patch below on a 16 processor x86_64 ES7000-600 server, and no longer see the panic I saw with the original 2.6.16-rc3. Signed-off-by: Dan Yeisley <dan.yeisley@unisys.com> Acked-by: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15[PATCH] hrtimer: fix multiple macro argument expansionRoman Zippel1-2/+8
For two macros the arguments were expanded twice, change them to inline functions to avoid it. Signed-off-by: Roman Zippel <zippel@linux-m68k.org> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15[PATCH] add asm-generic/mman.hMichael S. Tsirkin21-503/+96
Make new MADV_REMOVE, MADV_DONTFORK, MADV_DOFORK consistent across all arches. The idea is to make it possible to use them portably even before distros include them in libc headers. Move common flags to asm-generic/mman.h Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Cc: Roland Dreier <rolandd@cisco.com> Cc: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15[PATCH] cpuset: oops in exit on null cpuset fixPaul Jackson1-1/+34
Fix a latent bug in cpuset_exit() handling. If a task tried to allocate memory after calling cpuset_exit(), it oops'd in cpuset_update_task_memory_state() on a NULL cpuset pointer. So set the exiting tasks cpuset to the root cpuset instead of to NULL. A distro kernel hit this with an added kernel package that had just such a hook (allocating memory) in the exit code path. Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15[PATCH] ide: touch softlockup detector during pioAndrew Morton1-0/+3
We're getting some softlockup false positives during heavy PIO operations. So poke the lockup detector. Cc: Bartlomiej Zolnierkiewicz <B.Zolnierkiewicz@elka.pw.edu.pl> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15[PATCH] kbuild: revert "fix make -jN with multiple targets with O=..."Benjamin LaHaise1-4/+3
Commit 296e0855b0f9a4ec9be17106ac541745a55b2ce1: "kbuild: fix make -jN with multiple targets with O=..." causes a ~95% increase in build time for the kernel. Before: 4m21s after: 8m1.403s. Can we revert this until another approach is found? Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15[PATCH] neofb: avoid resetting display config on unblank (v2)Christian Trefzer2-3/+13
There were two mistakes in the register-read-on-(un)blank approach. - First, without proper register (un)locking the value read back will always be zero, and this is what I missed entirely until just now. Due to this, the logic could not be verified at all and I tried some bogus checks which are completely stupid. - Second, the LCD status bit will always be set to zero when the backlight has been turned off. Reading the value back during unblank will disable the LCD unconditionally, regardless of the state it is supposed to be in, since we set it to zero beforehand. So this is what we do now: - create a new variable in struct neofb_par, and use that to determine whether to read back registers (initialized to true) - before actually blanking the screen, read back the register to sense any possible change made through Fn key combo - use proper neoUnlock() / neoLock() to actually read something - every call to neofb_blank() determines if we read back next time: blanking disables readback, unblanking (FB_BLANK_UNBLANK) enables it This should give us a nice and clean state machine. Has been thoroughly tested on a Dell Latitude CPiA / NM220 Chip docked to a C/Dock2 with attached CRT in all possible combinations of LCD/CRT on/off. I changed the config via Fn key, let the console blank, unblanked by keypress - works flawlessly. Signed-off-by: Christian Trefzer <ctrefzer@gmx.de> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15[NETFILTER]: nf_conntrack: Fix TCP/UDP HW checksum handling for IPv6 packetYasuyuki Kozakai2-2/+6
If skb->ip_summed is CHECKSUM_HW here, skb->csum includes checksum of actual IPv6 header and extension headers. Then such excess checksum must be subtruct when nf_conntrack calculates TCP/UDP checksum with pseudo IPv6 header. Spotted by Ben Skeggs. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-15[NETFILTER]: nf_conntrack: attach conntrack to locally generated ICMPv6 errorYasuyuki Kozakai1-0/+6
Locally generated ICMPv6 errors should be associated with the conntrack of the original packet. Since the conntrack entry may not be in the hash tables (for the first packet), it must be manually attached. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-15[NETFILTER]: nf_conntrack: attach conntrack to TCP RST generated by ip6t_REJECTYasuyuki Kozakai1-0/+2
TCP RSTs generated by the REJECT target should be associated with the conntrack of the original TCP packet. Since the conntrack entry is usually not is the hash tables, it must be manually attached. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-15[NETFILTER]: nf_conntrack: move registration of __nf_ct_attachYasuyuki Kozakai2-5/+5
Move registration of __nf_ct_attach to nf_conntrack_core to make it usable for IPv6 connection tracking as well. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-15[NETFILTER]: x_tables: fix dependencies of conntrack related modulesYasuyuki Kozakai1-3/+3
NF_CONNTRACK_MARK is bool and depends on NF_CONNTRACK which is tristate. If a variable depends on NF_CONNTRACK_MARK and doesn't take care about NF_CONNTRACK, it can be y even if NF_CONNTRACK isn't y. NF_CT_ACCT have same issue, too. Signed-off-by: Yasuyuki Kozakai <yasuyuki.kozakai@toshiba.co.jp> Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-15[NETFILTER]: Don't invoke okfn in CONFIG_NETFILTER=n variant of nf_hook()Patrick McHardy1-1/+1
nf_hook() is supposed to call the netfilter hook and return control of the packet back to the caller in case it may pass, the okfn is only used for queueing. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-15[XFRM]: Fix SNAT-related crash in xfrm4_output_finishPatrick McHardy7-16/+40
When a packet matching an IPsec policy is SNATed so it doesn't match any policy anymore it looses its xfrm bundle, which makes xfrm4_output_finish crash because of a NULL pointer dereference. This patch directs these packets to the original output path instead. Since the packets have already passed the POST_ROUTING hook, but need to start at the beginning of the original output path which includes another POST_ROUTING invocation, a flag is added to the IPCB to indicate that the packet was rerouted and doesn't need to pass the POST_ROUTING hook again. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-15[PATCH] fix zap_thread's ptrace related problemsOleg Nesterov3-11/+17
1. The tracee can go from ptrace_stop() to do_signal_stop() after __ptrace_unlink(p). 2. It is unsafe to __ptrace_unlink(p) while p->parent may wait for tasklist_lock in ptrace_detach(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Christoph Hellwig <hch@lst.de> Cc: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15[PATCH] fix kill_proc_info() vs fork() theoretical raceOleg Nesterov1-2/+2
copy_process: attach_pid(p, PIDTYPE_PID, p->pid); attach_pid(p, PIDTYPE_TGID, p->tgid); What if kill_proc_info(p->pid) happens in between? copy_process() holds current->sighand.siglock, so we are safe in CLONE_THREAD case, because current->sighand == p->sighand. Otherwise, p->sighand is unlocked, the new process is already visible to the find_task_by_pid(), but have a copy of parent's 'struct pid' in ->pids[PIDTYPE_TGID]. This means that __group_complete_signal() may hang while doing do ... while (next_thread() != p) We can solve this problem if we reverse these 2 attach_pid()s: attach_pid() does wmb() group_send_sig_info() calls spin_lock(), which provides a read barrier. // Yes ? I don't think we can hit this race in practice, but still. Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15[PATCH] fix kill_proc_info() vs CLONE_THREAD raceOleg Nesterov1-3/+2
There is a window after copy_process() unlocks ->sighand.siglock and before it adds the new thread to the thread list. In that window __group_complete_signal(SIGKILL) will not see the new thread yet, so this thread will start running while the whole thread group was supposed to exit. I beleive we have another good reason to place attach_pid(PID/TGID) under ->sighand.siglock. We can do the same for release_task()->__unhash_process() de_thread()->switch_exec_pids() After that we don't need tasklist_lock to iterate over the thread list, and we can simplify things, see for example do_sigaction() or sys_times(). Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Roland McGrath <roland@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-15Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds4-6/+47
2006-02-15[BRIDGE]: Fix deadlock in br_stp_disable_bridgeAdrian Drzewiecki1-2/+2
Looks like somebody forgot to use the _bh spin_lock variant. We ran into a deadlock where br->hello_timer expired while br_stp_disable_br() walked br->port_list. Signed-off-by: Adrian Drzewiecki <z@drze.net> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-15[NETFILTER]: Fix xfrm lookup after SNATPatrick McHardy3-4/+45
To find out if a packet needs to be handled by IPsec after SNAT, packets are currently rerouted in POST_ROUTING and a new xfrm lookup is done. This breaks SNAT of non-unicast packets to non-local addresses because the packet is routed as incoming packet and no neighbour entry is bound to the dst_entry. In general, it seems to be a bad idea to replace the dst_entry after the packet was already sent to the output routine because its state might not match what's expected. This patch changes the xfrm lookup in POST_ROUTING to re-use the original dst_entry without routing the packet again. This means no policy routing can be used for transport mode transforms (which keep the original route) when packets are SNATed to match the policy, but it looks like the best we can do for now. Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-15Input: kill remnants of 98kbd{,-io} and 98spkrArthur Othieno3-3/+0
98kbd{,-io} and 98spkr all went out with PC98 subarch. Remove stale Makefile entries that remained. Signed-off-by: Arthur Othieno <apgo@patchbomb.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15Input: ads7846 - assorted updatesDavid Brownell1-24/+44
This updates the ads7846 touchscreen driver: - to allow faster clocking (this driver doesn't push sample rates); - bugfixes the conversion of spi_transfer to lists; - some dma-unsafe command buffers are fixed. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15Input: ads7846 - convert to to dynamic input_dev allocationDmitry Torokhov1-32/+47
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15Input: trackpoint - enable devices connected to external portDmitry Torokhov2-8/+16
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15Input: logips2pp - add new signature (99)Meelis Roos1-0/+1
Add Logitech mouse type 99 (Premium Optical Wheel Mouse, model M-BT58, plain 3 buttons + wheel) to cure the following message: logips2pp: Detected unknown logitech mouse model 99 Signed-off-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-15Input: ixp4xx-beeper - fix compile errorAlessandro Zummo1-0/+1
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2006-02-14[PATCH] CIFS: fix cifs_user_read oops when null SMB response on ↵Steve French1-6/+8
forcedirectio mount This patch fixes an oops reported by Adrian Bunk in cifs_user_read when a null read response is returned on a forcedirectio mount. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Steve French <sfrench@us.ibm.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Powered by cgit, Gruvboxed by Blaster4385.