Age | Commit message (Collapse) | Author | Files | Lines |
|
It's causing problems with user mode queues and the HIQ, and can
lead to hard hangs during boot after programming RLC_CP_SCHEDULERS.
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
To match current firmware. The map process packet has been extended
to support scratch. This is a non-backwards compatible change and
it's about two years old. So no point keeping the old version around
conditionally.
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Gfx8 HW incorrectly clamps CP_HQD_EOP_CONTROL.EOP_SIZE, which can
lead to scheduling deadlock due to SE EOP done counter overflow.
Enforce a EOP queue size limit which prevents the CP from sending
more than 0xFF events at a time.
Signed-off-by: Jay Cornwall <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Acked-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
v2: Turned WARN into dev_warn and made the message more helpful
Signed-off-by: Yong Zhao <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
In most cases, BUG_ONs can be replaced with WARN_ON with an error
return. In some void functions just turn them into a WARN_ON and
possibly an early exit.
v2:
* Cleaned up error handling in pm_send_unmap_queue
* Removed redundant WARN_ON in kfd_process_destroy_delayed
Signed-off-by: Felix Kuehling <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
gtt_sa_bitmap is accessed by bitmap functions, which operate on longs.
Therefore the array should be allocated in long units. Also round up
in case the number of bits is not a multiple of BITS_PER_LONG.
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Handle errors in doorbell aperture initialization instead of BUG_ON.
iounmap doorbell aperture during finalization.
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Remove BUG_ONs that check for NULL pointer arguments that are
dereferenced in the same function. Dereferencing the NULL pointer
will generate a BUG anyway, so the explicit check is redundant and
unnecessary overhead.
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
See https://kernel.org/doc/html/latest/process/coding-style.html
under "14) Allocating Memory" for rationale behind removing the
x=alloc(sizeof(struct) style and using x=alloc(sizeof(*x) instead
Signed-off-by: Kent Russell <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Remove gotos that do not feature any common cleanup, and use gotos
instead of repeating cleanup commands.
According to kernel.org: "The goto statement comes in handy when a
function exits from multiple locations and some common work such as
cleanup has to be done. If there is no cleanup needed then just return
directly."
v2: Applied review suggestions in create_queue_nocpsch
Signed-off-by: Kent Russell <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Upstream prefers the !x notation to x==NULL or x==false. Along those lines
change the ==true or !=NULL references as well. Also make the references
to !x the same, excluding () for readability.
Signed-off-by: Kent Russell <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Consolidate log commands so that dev_info(NULL, "Error...") uses the more
accurate pr_err, remove the module name from the log (can be seen via
dynamic debugging with +m), and the function name (can be seen via
dynamic debugging with +f). We also don't need debug messages saying
what function we're in. Those can be added by devs when needed
Don't print vendor and device ID in error messages. They are typically
the same for all GPUs in a multi-GPU system. So this doesn't add any
value to the message.
Lastly, remove parentheses around %d, %i and 0x%llX.
According to kernel.org:
"Printing numbers in parentheses (%d) adds no value and should be
avoided."
Signed-off-by: Kent Russell <[email protected]>
Signed-off-by: Yong Zhao <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Using checkpatch.pl -f <file> showed a number of style issues. This
patch addresses as many of them as possible. Some long lines have been
left for readability, but attempts to minimize them have been made.
v2: Broke long lines in gfx_v7 get_fw_version
Signed-off-by: Kent Russell <[email protected]>
Signed-off-by: Felix Kuehling <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Remove hard-coded assumption that the first compute pipe is
reserved for amdgpu. Pipe 0 actually means pipe 0 now.
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Use shared_resources.queue_bitmap to determine the queues available
for KFD in each pipe.
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
kfd2kgd->address_watch_get_offset returns dword register offsets.
Signed-off-by: Felix Kuehling <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Dword offsets are what KFD really needs and what amdgpu already returns.
Signed-off-by: Felix Kuehling <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
Signed-off-by: Felix Kuehling <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
|
|
The most recent merge commit in airlied/drm-next has problems with
confusing old_crtc_state and new_crtc_state. Use the
for_each_oldnew_crtc_in_state macros to clean up the confusion,
and explicitly look at the correct state instead of looking at
asyh->state.
With these fixes it becomes more obvious what the code is trying to do,
which will hopefully prevent future confusion.
Cc: Dave Airlie <[email protected]>
Signed-off-by: Maarten Lankhorst <[email protected]>
Signed-off-by: Dave Airlie <[email protected]>
|
|
Different from previous platforms, on CNL+ there's separated
registers for separated indexes.
v2: Remove comments regarding uncertainty around the table.
v3: Remove extra line (by Ben)
Cc: Clint Taylor <[email protected]>
Cc: Daniele Ceraolo Spurio <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Reviewed-by: Ben Widawsky <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Some fixed resolution panels actually support more than one mode,
with the only thing different being the refresh rate. Having this
alternate mode available to us is desirable, because it allows us to
test PSR on panels whose setup time at the preferred mode is too long.
With this patch we allow the use of the alternate mode if it's
available and it was specifically requested.
v2 and v3: Rebase
v4: * Fix up some leaky mode stuff (Chris)
* Rebase
v5: * Fix a NULL pointer derefrence (David Weinehall)
v6: * Whitespace / spelling / checkpatch clean-up; no functional
change. (David)
* Rebase
Cc: David Weinehall <[email protected]>
Cc: Rodrigo Vivi <[email protected]>
Cc: Paulo Zanoni <[email protected]>
Cc: Jani Nikula <[email protected]>
Cc: Chris Wilson <[email protected]>
Reviewed-by: David Weinehall <[email protected]>
Signed-off-by: Jim Bride <[email protected]>
Signed-off-by: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Was using the wrong prefix (gmc rather than gfx). The function
is related to the gfx hw, not gmc. This also makes it consistent
with the naming in gfx8.
Reviewed-by: Harry Wentland <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Power Gating is disabled in Stoney platform.
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Vijendar Mukunda <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Added DW_I2S_QUIRK_16BIT_IDX_OVERRIDE quirk for Stoney.
Supported format and bus width for I2S controller read
from I2S Component Parameter registers.
These are ready only registers.
For Stoney, I2S Component Parameter registers are programmed
to support 32 bit format and 4 bytes bus width only.
By setting this quirk,It will override 32 bit format with
16 bit format and 2 bytes as bus width for Stoney.
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Vijendar Mukunda <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Evan Quan <[email protected]>
Signed-off-by: Huang Rui <[email protected]>
Acked-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Evan Quan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
digest_size has been retired from sdma v4 fw
Signed-off-by: Hawking Zhang <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Evan Quan <[email protected]>
Reviewed-by: Junwei Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
My static checker complains that it's possible for "r" to be
uninitialized. It used to be set to zero so this returns it to the old
behavior.
Fixes: 98a7f88ce9a9 ("drm/amdgpu: bind BOs with GTT space allocated directly v2")
Reviewed-by: Christian König <[email protected]>
Reviewed-by: Michel Dänzer <[email protected]>
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Use pr_debug to prevent spamming unimportant dmesg.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
If a ring is not initialized, it also should not be finished.
For example, in Vega10's SR-IOV environment, UVD's decode ring is not
initialized, but will be finnished in amdgpu_uvd_sw_fini, because UVD
driver put all the uvd decode ring's finish operation into
amdgpu_uvd_sw_fini function, while not uvd_vXXX_0_sw_fini. This will
lead to amdgpu module unloading failure.
Signed-off-by: Trigger Huang <[email protected]>
Reviewed-by: Monk Liu <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Change "prefered" to "preferred"
Signed-off-by: Kent Russell <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Change "prefered" to "preferred"
Signed-off-by: Kent Russell <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Change "stollen" to "stolen"
Signed-off-by: Kent Russell <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Change "stollen" to "stolen"
Signed-off-by: Kent Russell <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
delete unneeded semicolon.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
We won't use this member in other files, so set it static.
Signed-off-by: Huang Rui <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() adn should not be
used by new code. So convert all users of compatibility functions to use
the new APIs.
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
drm_*_reference() and drm_*_unreference() functions are just
compatibility alias for drm_*_get() and drm_*_put() and should not be
used by new code. So convert all users of compatibility functions to use
the new APIs.
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Cihangir Akturk <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Support the profiling modes for sclk.
v2: delete profileing mode for mclk.
Signed-off-by: Alex Deucher <[email protected]>
Signed-off-by: Rex Zhu <[email protected]>
Tested-and-Reviewed-by Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
|
|
cherry-pick from windows driver.
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Signed-off-by: Rex Zhu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
May waste a bit of memory, but simplifies the interface
significantly.
v2: convert internal accounting to use 256bit slots
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
There are no external users of function amdgpu_atif_handler so it can
be static.
Signed-off-by: Jean Delvare <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: "Christian König" <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
There are no external users of function radeon_atif_handler so it can
be static.
Signed-off-by: Jean Delvare <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: "Christian König" <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Include a missing header to get rid of the following warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:65:6: warning: no previous prototype for ‘amdgpu_pm_acpi_event_handler’ [-Wmissing-prototypes]
void amdgpu_pm_acpi_event_handler(struct amdgpu_device *adev)
^
Signed-off-by: Jean Delvare <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: "Christian König" <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Include a missing header to get rid of the following warning:
drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:521:6: warning: no previous prototype for 'dce_v6_0_disable_dce' [-Wmissing-prototypes]
void dce_v6_0_disable_dce(struct amdgpu_device *adev)
^
Signed-off-by: Jean Delvare <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: "Christian König" <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
As I was staring at the si_init_golden_registers code, I noticed that
the Pitcairn initialization silently falls through the Cape Verde
initialization, and the Oland initialization falls through the Hainan
initialization. However there is no comment stating that this is
intentional, and the radeon driver doesn't have any such fallthrough,
so I suspect this is not supposed to happen.
Signed-off-by: Jean Delvare <[email protected]>
Fixes: 62a37553414a ("drm/amdgpu: add si implementation v10")
Cc: Ken Wang <[email protected]>
Cc: Alex Deucher <[email protected]>
Cc: "Marek Olšák" <[email protected]>
Cc: "Christian König" <[email protected]>
Cc: Flora Cui <[email protected]>
Reviewed-by: Marek Olšák <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Move it up before ring enablement with all of the other
engine setup and explicitly disable it for bare metal.
Cc: Frank Min <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|