aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-01-12ALSA: hda: Properly setup HDMI streamAmadeusz Sławiński1-0/+6
Since commit 4005d1ba0a7e ("ASoC: soc-dai: don't call PCM audio ops if the stream is not supported") HDMI playback is broken with avs driver. This happens because for HDMI stream (unlike generic HDA one) channels_min for stream is not set when creating PCMs. Fix this by setting the value based on first available converter. Fixes: 4005d1ba0a7e ("ASoC: soc-dai: don't call PCM audio ops if the stream is not supported") Signed-off-by: Amadeusz Sławiński <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-01-12ALSA: oxygen: Fix right channel of capture volume mixerTakashi Iwai1-1/+1
There was a typo in oxygen mixer code that didn't update the right channel value properly for the capture volume. Let's fix it. This trivial fix was originally reported on Bugzilla. Fixes: a3601560496d ("[ALSA] oxygen: add front panel controls") Cc: <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=156561 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-01-12ALSA: aloop: Introduce a function to get if access is interleaved modeChancel Liu1-6/+17
There's a use case that playback stream of a loopback cable works on RW_INTERLEAVED mode while capture stream works on MMAP_INTERLEAVED mode: aplay -Dhw:Loopback,0,0 S32_48K_2ch.wav; arecord -Dplughw:Loopback,1,0 -fS32_LE -r16000 -c2 cap.wav; The plug plugin handles only slave PCM support MMAP mode. Not only plug plugin but also other plugins like direct plugins(dmix/dsnoop/dshare) work on MMAP access mode. In this case capture stream is the slave PCM works on MMAP_INTERLEAVED mode. However loopback_check_format() rejects this access setting and return: arecord: pcm_read:2240: read error: Input/output error To fix it a function called is_access_interleaved() is introduced to get if access is interleaved mode. If both access of capture stream and playback stream is interleaved mode loopback_check_format() will allow this kind of access setting. Fixes: 462494565c27 ("ALSA: aloop: Add support for the non-interleaved access mode") Signed-off-by: Chancel Liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-01-09kselftest/alsa - conf: Stringify the printed errno in sysfs_get()Mirsad Todorovac1-1/+1
GCC 13.2.0 reported the warning of the print format specifier: conf.c: In function ‘sysfs_get’: conf.c:181:72: warning: format ‘%s’ expects argument of type ‘char *’, \ but argument 3 has type ‘int’ [-Wformat=] 181 | ksft_exit_fail_msg("sysfs: unable to read value '%s': %s\n", | ~^ | | | char * | %d The fix passes strerror(errno) as it was intended, like in the sibling error exit message. Fixes: aba51cd0949ae ("selftests: alsa - add PCM test") Cc: Mark Brown <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Shuah Khan <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Mirsad Todorovac <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-01-09kselftest/alsa - mixer-test: Fix the print format specifier warningMirsad Todorovac1-1/+1
GCC 13.2.0 compiler issued the following warning: mixer-test.c:350:80: warning: format ‘%ld’ expects argument of type ‘long int’, \ but argument 5 has type ‘unsigned int’ [-Wformat=] 350 | ksft_print_msg("%s.%d value %ld more than item count %ld\n", | ~~^ | | | long int | %d 351 | ctl->name, index, int_val, 352 | snd_ctl_elem_info_get_items(ctl->info)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | unsigned int Fixing the format specifier in call to ksft_print_msg() according to the compiler suggestion silences the warning. Fixes: 10f2f194663af ("kselftest: alsa: Validate values read from enumerations") Cc: Mark Brown <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Shuah Khan <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Mirsad Todorovac <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-01-09kselftest/alsa - mixer-test: Fix the print format specifier warningMirsad Todorovac1-1/+1
The GCC 13.2.0 compiler issued the following warning: mixer-test.c: In function ‘ctl_value_index_valid’: mixer-test.c:322:79: warning: format ‘%lld’ expects argument of type ‘long long int’, \ but argument 5 has type ‘long int’ [-Wformat=] 322 | ksft_print_msg("%s.%d value %lld more than maximum %lld\n", | ~~~^ | | | long long int | %ld 323 | ctl->name, index, int64_val, 324 | snd_ctl_elem_info_get_max(ctl->info)); | ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ | | | long int Fixing the format specifier as advised by the compiler suggestion removes the warning. Fixes: 3f48b137d88e7 ("kselftest: alsa: Factor out check that values meet constraints") Cc: Mark Brown <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Shuah Khan <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Mirsad Todorovac <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-01-09kselftest/alsa - mixer-test: fix the number of parameters to ↵Mirsad Todorovac1-1/+1
ksft_exit_fail_msg() Minor fix in the number of arguments to error reporting function in the test program as reported by GCC 13.2.0 warning. mixer-test.c: In function ‘find_controls’: mixer-test.c:169:44: warning: too many arguments for format [-Wformat-extra-args] 169 | ksft_exit_fail_msg("snd_ctl_poll_descriptors() failed for %d\n", | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ The number of arguments in call to ksft_exit_fail_msg() doesn't correspond to the format specifiers, so this is adjusted resembling the sibling calls to the error function. Fixes: b1446bda56456 ("kselftest: alsa: Check for event generation when we write to controls") Cc: Mark Brown <[email protected]> Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Shuah Khan <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Mirsad Todorovac <[email protected]> Acked-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-01-09ALSA: hda/tas2781: annotate calibration data endiannessGergo Koteles1-1/+1
Sparse reports an endian mismatch. The amplifier expects the calibration data as big-endian. Use the __be32 type to express endianness better. Fixes: c3ca4458cc2f ("ALSA: hda/tas2781: add TAS2563 support for 14ARB7") Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Gergo Koteles <[email protected]> Link: https://lore.kernel.org/r/3852ff28ea7d5d8f2086d8dd78aeff8d1d984991.1704748435.git.soyer@irl.hu Signed-off-by: Takashi Iwai <[email protected]>
2024-01-08ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP Envy X360 13-ay0xxxTom Jason Schwanke1-0/+1
This enables the mute and mic-mute LEDs on the HP Envy X360 13-ay0xxx convertibles. The quirk 'ALC245_FIXUP_HP_X360_MUTE_LEDS' already exists and is now enabled for this device. Link: https://bugzilla.kernel.org/show_bug.cgi?id=216197 Signed-off-by: Tom Jason Schwanke <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-01-08ALSA: hda/conexant: Fix headset auto detect fail in cx8070 and SN6140bo liu1-2/+113
When OMTP headset plugin the headset jack of CX8070 and SN6160 sound cards, the headset type detection circuit will recognize the headset type as CTIA. At this point, plugout and plugin the headset will get the correct headset type as OMTP. The reason for the failure of headset type recognition is that the sound card creation will enable the VREF voltage of the headset mic, which interferes with the headset type automatic detection circuit. Plugout and plugin the headset will restart the headset detection and get the correct headset type. The patch is disable the VREF voltage when the headset is not present, and will enable the VREF voltage when the headset is present. Signed-off-by: bo liu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-01-08Merge tag 'asoc-v6.8' of ↵Takashi Iwai480-6969/+8558
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Updates for v6.8 This is a relatively quiet release, there's a lot of driver specific changes and the usual high level of activity in the SOF core but the one big core change was Mormioto-san's work to support more N:M CPU:CODEC mapping cases. Highlights include: - Enhanced support for N:M CPU:CODEC mappings in the core and in audio-graph-card2. - Support for falling back to older SOF IPC versions where firmware for new versions is not available. - Support for notification of control changes generated by SOF firmware with IPC4. - Device tree support for describing parts of the card which can be active over suspend (for very low power playback or wake word use cases). - ACPI parsing support for the ES83xx driver, reducing the number of quirks neede for x86 systems. - Support for more AMD and Intel systems, NXP i.MX8m MICFIL, Qualcomm SM8250, SM8550, SM8650 and X1E80100. - Removal of Freescale MPC8610 support, the SoC is no longer supported by Linux.
2024-01-08Merge branch 'for-next' into for-linusTakashi Iwai55-907/+4706
Prepare for 6.8 merge. Signed-off-by: Takashi Iwai <[email protected]>
2024-01-04ALSA: hda/realtek: Fix mute and mic-mute LEDs for HP ProBook 440 G6Siddhesh Dharme1-0/+1
LEDs in 'HP ProBook 440 G6' laptop are controlled by ALC236 codec. Enable already existing quirk 'ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF' to fix mute and mic-mute LEDs. Signed-off-by: Siddhesh Dharme <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-01-04Merge tag 'asoc-fix-v6.7-rc8' of ↵Takashi Iwai4-5/+20
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.7 I recently got a LibreTech Sapphire board for my CI and while integrating it found and fixed some issues, including crashes for the enum validation. There's also a couple of patches adding quirks for another x86 laptop from Hans and an error handling fix for the Freescale rpmsg driver.
2024-01-03ASoC: meson: g12a-tohdmitx: Fix event generation for S/PDIF muxMark Brown1-1/+1
When a control changes value the return value from _put() should be 1 so we get events generated to userspace notifying applications of the change. While the I2S mux gets this right the S/PDIF mux does not, fix the return value. Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control") Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-01-03ASoC: meson: g12a-toacodec: Fix event generationMark Brown1-1/+1
When a control changes value the return value from _put() should be 1 so we get events generated to userspace notifying applications of the change. We are checking if there has been a change and exiting early if not but we are not providing the correct return value in the latter case, fix this. Fixes: af2618a2eee8 ("ASoC: meson: g12a: add internal DAC glue driver") Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-01-03ASoC: meson: g12a-tohdmitx: Validate written enum valuesMark Brown1-0/+6
When writing to an enum we need to verify that the value written is valid for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't do it since it needs to return an unsigned (and in any case we'd need to check the return value). Fixes: c8609f3870f7 ("ASoC: meson: add g12a tohdmitx control") Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-01-03ASoC: meson: g12a-toacodec: Validate written enum valuesMark Brown1-0/+3
When writing to an enum we need to verify that the value written is valid for the enumeration, the helper function snd_soc_item_enum_to_val() doesn't do it since it needs to return an unsigned (and in any case we'd need to check the return value). Fixes: af2618a2eee8 ("ASoC: meson: g12a: add internal DAC glue driver") Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2024-01-03ASoC: SOF: Intel: hda-codec: Delay the codec device registrationPeter Ujfalusi1-9/+9
The current code flow is: 1. snd_hdac_device_register() 2. set parameters needed by the hdac driver 3. request_codec_module() the hdac driver is probed at this point During boot the codec drivers are not loaded when the hdac device is registered, it is going to be probed later when loading the codec module, which point the parameters are set. On module remove/insert rmmod snd_sof_pci_intel_tgl modprobe snd_sof_pci_intel_tgl The codec module remains loaded and the driver will be probed when the hdac device is created right away, before the parameters for the driver has been configured: 1. snd_hdac_device_register() the hdac driver is probed at this point 2. set parameters needed by the hdac driver 3. request_codec_module() will be a NOP as the module is already loaded Move the snd_hdac_device_register() later, to be done right before requesting the codec module to make sure that the parameters are all set before the device is created: 1. set parameters needed by the hdac driver 2. snd_hdac_device_register() 3. request_codec_module() This way at the hdac driver probe all parameters will be set in all cases. Link: https://github.com/thesofproject/linux/issues/4731 Fixes: a0575b4add21 ("ASoC: hdac_hda: Conditionally register dais for HDMI and Analog") Signed-off-by: Peter Ujfalusi <[email protected]> Reviewed-by: Bard Liao <[email protected]> Reviewed-by: Pierre-Louis Bossart <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://bugzilla.kernel.org/show_bug.cgi?id=218304 Signed-off-by: Takashi Iwai <[email protected]>
2024-01-03ALSA: hda: cs35l41: fix building without CONFIG_SPIArnd Bergmann1-3/+1
When CONFIG_SPI is disabled, the driver produces unused-variable warning: sound/pci/hda/cs35l41_hda_property.c: In function 'generic_dsd_config': sound/pci/hda/cs35l41_hda_property.c:181:28: error: unused variable 'spi' [-Werror=unused-variable] 181 | struct spi_device *spi; | ^~~ sound/pci/hda/cs35l41_hda_property.c:180:27: error: unused variable 'cs_gpiod' [-Werror=unused-variable] 180 | struct gpio_desc *cs_gpiod; | ^~~~~~~~ Avoid these by turning the preprocessor contionals into equivalent C code, which also helps readability. Fixes: 916d051730ae ("ALSA: hda: cs35l41: Only add SPI CS GPIO if SPI is enabled in kernel") Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-01-03ALSA: ac97: fix build regressionArnd Bergmann1-1/+2
The ac97_bus_type structure is no longer declared in this file: sound/ac97/bus.c: In function 'ac97_codec_add': sound/ac97/bus.c:112:27: error: 'ac97_bus_type' undeclared (first use in this function); did you mean 'bus_type'? 112 | codec->dev.bus = &ac97_bus_type; | ^~~~~~~~~~~~~ | bus_type sound/ac97/bus.c:112:27: note: each undeclared identifier is reported only once for each function it appears in sound/ac97/bus.c: In function 'snd_ac97_codec_driver_register': sound/ac97/bus.c:191:28: error: 'ac97_bus_type' undeclared (first use in this function); did you mean 'ac97_bus_reset'? 191 | drv->driver.bus = &ac97_bus_type; Include the header that contains the declaration and make sure the definition is const but not static. Fixes: 66e82d219924 ("ALSA: mark all struct bus_type as const") Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-01-03Merge branch 'topic/cs35l41' into for-nextTakashi Iwai1-0/+44
Pull updates for CS35L41 codec for HP models. Signed-off-by: Takashi Iwai <[email protected]>
2024-01-03ALSA: hda: cs35l41: Support more HP models without _DSDLorenz Brun1-0/+44
This adds overrides for a series of notebooks using a common config taken from HP's proprietary Windows driver. This has been tested on a HP 15-ey0xxxx device (subsystem 103C8A31) together with another Realtek quirk and the calibration files from the proprietary driver. Signed-off-by: Lorenz Brun <[email protected]> Cc: <[email protected]> # v6.7 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2024-01-02ALSA: hda/tas2781: add fixup for Lenovo 14ARB7Gergo Koteles1-0/+14
The 14ARB7 has two tas2563 amplifier on i2c. Connect it to the tas2781 driver. Signed-off-by: Gergo Koteles <[email protected]> Link: https://lore.kernel.org/r/abce9ee55689523562feb72383377171a489ddc7.1703891777.git.soyer@irl.hu Signed-off-by: Takashi Iwai <[email protected]>
2024-01-02ALSA: hda/tas2781: add TAS2563 support for 14ARB7Gergo Koteles2-0/+88
The INT8866 belongs to the Lenovo Yoga 7 Gen 7 AMD 14ARB7 laptop. It has two TAS2563 amplifier. Add the PNP ID and calibration functions to handle them. ACPI excerpt: Scope (_SB.I2CD) { Device (TAS) { Name (_HID, "INT8866") // _HID: Hardware ID Name (_UID, Zero) // _UID: Unique ID Method (_CRS, 0, NotSerialized) // _CRS: Current Resource Settings { Name (RBUF, ResourceTemplate () { I2cSerialBusV2 (0x004C, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.I2CD", 0x00, ResourceConsumer, , Exclusive, ) I2cSerialBusV2 (0x004D, ControllerInitiated, 0x00061A80, AddressingMode7Bit, "\\_SB.I2CD", 0x00, ResourceConsumer, , Exclusive, ) GpioInt (Edge, ActiveLow, SharedAndWake, PullNone, 0x0000, "\\_SB.GPIO", 0x00, ResourceConsumer, , ) { // Pin list 0x0020 } }) Return (RBUF) /* \_SB_.I2CD.TAS_._CRS.RBUF */ } Method (_STA, 0, NotSerialized) // _STA: Status { Return (0x0F) } } } Signed-off-by: Gergo Koteles <[email protected]> Link: https://lore.kernel.org/r/3b8d4c602e1a46922f53bc9afc8b705d55aa4872.1703891777.git.soyer@irl.hu Signed-off-by: Takashi Iwai <[email protected]>
2024-01-02ALSA: hda/tas2781: add configurable global i2c addressGergo Koteles2-1/+4
Make the global i2c address configurable to support compatible amplifiers with different global i2c address. Signed-off-by: Gergo Koteles <[email protected]> Link: https://lore.kernel.org/r/a252f1efeed5049f027f01e699c9e10e1e05bf9e.1703891777.git.soyer@irl.hu Signed-off-by: Takashi Iwai <[email protected]>
2024-01-02ALSA: hda/tas2781: add ptrs to calibration functionsGergo Koteles3-14/+31
Make calibration functions configurable to support different calibration data storage modes. Signed-off-by: Gergo Koteles <[email protected]> Link: https://lore.kernel.org/r/5859c77ffef752b8a9784713b412d815d7e2688c.1703891777.git.soyer@irl.hu Signed-off-by: Takashi Iwai <[email protected]>
2024-01-02ALSA: hda/realtek: fix mute/micmute LEDs for a HP ZBookAndy Chi1-0/+1
There is a HP ZBook which using ALC236 codec and need the ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF quirk to make mute LED and micmute LED work. [ confirmed that the new entries are for new models that have no proper name, so the strings are left as "HP" which will be updated eventually later -- tiwai ] Signed-off-by: Andy Chi <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-12-30Merge branch 'topic/cs35l41' into for-nextTakashi Iwai2-0/+12
Pull CS35L41 codec updates for Lenovo laptops. Signed-off-by: Takashi Iwai <[email protected]>
2023-12-30ALSA: hda: Add driver properties for cs35l41 for Lenovo Legion Slim 7 Gen 8 ↵Dorian Cruveiller1-0/+8
serie Add driver properties on 4 models of this laptop serie since they don't have _DSD in the ACPI table Signed-off-by: Dorian Cruveiller <[email protected]> Cc: <[email protected]> # v6.7 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-12-30ALSA: hda/realtek: enable SND_PCI_QUIRK for Lenovo Legion Slim 7 Gen 8 ↵Dorian Cruveiller1-0/+4
(2023) serie Link up the realtek audio chip to the cirrus cs35l41 sound amplifier chip on 4 models of the Lenovo legion slim 7 gen 8 (2023). These models are 16IRH8 (2 differents subsystem id) and 16APH8 (2 differents subsystem ids). Subsystem ids list: - 17AA38B4 - 17AA38B5 - 17AA38B6 - 17AA38B7 Signed-off-by: Dorian Cruveiller <[email protected]> Cc: <[email protected]> # v6.7 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-12-30ALSA: hda/tas2781: configure the amp after firmware loadGergo Koteles1-0/+2
Make the amp available immediately after a module load to avoid having to wait for a PCM hook action. (eg. unloading & loading the module while listening music) Signed-off-by: Gergo Koteles <[email protected]> Link: https://lore.kernel.org/r/7f2f65d9212aa16edd4db8725489ae59dbe74c66.1703895108.git.soyer@irl.hu Signed-off-by: Takashi Iwai <[email protected]>
2023-12-30ALSA: hda/realtek: enable SND_PCI_QUIRK for hp pavilion 14-ec1xxx seriesAabish Malik1-0/+1
The HP Pavilion 14 ec1xxx series uses the HP mainboard 8A0F with the ALC287 codec. The mute led can be enabled using the already existing ALC287_FIXUP_HP_GPIO_LED quirk. Tested on an HP Pavilion ec1003AU Signed-off-by: Aabish Malik <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2023-12-30ALSA: mark all struct bus_type as constGreg Kroah-Hartman5-6/+4
Now that the driver core can properly handle constant struct bus_type, move all of the sound subsystem struct bus_type structures as const, placing them into read-only memory which can not be modified at runtime. Note, this fixes a duplicate definition of ac97_bus_type, which somehow was declared extern in a .h file, and then static as a prototype in a .c file, and then properly later on in the same .c file. Amazing that no compiler warning ever showed up for this. Cc: Jaroslav Kysela <[email protected]> Cc: Takashi Iwai <[email protected]> Cc: Dawei Li <[email protected]> Cc: Yu Liao <[email protected]> Cc: "Rafael J. Wysocki" <[email protected]> Cc: Hans de Goede <[email protected]> Cc: [email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]> Link: https://lore.kernel.org/r/2023121945-immersion-budget-d0aa@gregkh Signed-off-by: Takashi Iwai <[email protected]>
2023-12-29ASoC: pxa: sspa: Don't select SND_ARMDuje Mihanović1-1/+0
On ARM64 platforms, SND_ARM shouldn't be selectable, but enabling SND_SOC_MMP_SSPA will enable SND_ARM and cause build errors if SND_ARMAACI is enabled (which it is by default). Since the SSPA driver doesn't depend on AACI nor PXA2XX_LIB, remove this false dependency. Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Duje Mihanović <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-12-29ASoC: rt5663: cancel the work when system suspendsShuming Fan1-0/+11
This patch makes sure that the workqueue is completed before the system suspends. Signed-off-by: Shuming Fan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-12-29ASoC: mediatek: mt8186: fix AUD_PAD_TOP register and offsetEugen Hristev1-1/+1
AUD_PAD_TOP widget's correct register is AFE_AUD_PAD_TOP , and not zero. Having a zero as register, it would mean that the `snd_soc_dapm_new_widgets` would try to read the register at offset zero when trying to get the power status of this widget, which is incorrect. Fixes: b65c466220b3 ("ASoC: mediatek: mt8186: support adda in platform driver") Signed-off-by: Eugen Hristev <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-12-29Merge branch 'topic/scarlett2' into for-nextTakashi Iwai4-719/+3980
Pull Scarlett2 USB audio mixer extensions. Signed-off-by: Takashi Iwai <[email protected]>
2023-12-29ALSA: scarlett2: Add PCM Input Switch for Solo Gen 4Geoffrey D. Bennett1-0/+151
When the Direct button on the Solo Gen 4 is held for 3 seconds, the PCM 1 and 2 inputs are toggled between DSP Outputs 1 and 2, and Mixer Outputs E and F. This patch adds the corresponding ALSA control. Signed-off-by: Geoffrey D. Bennett <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-29ALSA: scarlett2: Add support for Solo, 2i2, and 4i4 Gen 4Geoffrey D. Bennett3-17/+351
Add new Focusrite Scarlett Gen 4 USB IDs, notification arrays, config sets, and device info data. Signed-off-by: Geoffrey D. Bennett <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-29ALSA: scarlett2: Add R/O headphone volume controlGeoffrey D. Bennett1-1/+81
The Scarlett 4i4 Gen 4 adds a R/O headphone volume control in addition to a R/O master volume control (which is already supported). Mark the new scarlett2_notify_volume() function with __always_unused until it gets used when the Gen 4 notification callback function arrays are added. Signed-off-by: Geoffrey D. Bennett <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-29ALSA: scarlett2: Add minimum firmware version checkGeoffrey D. Bennett1-5/+66
Early firmware for the Scarlett Gen 4 devices has sufficient differences that it is better to enforce a minimum firmware version than to try and work around those differences. Add a minimum firmware version field to the device info struct, and display a message if the firmware version is too old. Only create the Firmware Version and MSD (optional) controls in this case. Signed-off-by: Geoffrey D. Bennett <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-29ALSA: scarlett2: Rename DSP mux channelsGeoffrey D. Bennett1-6/+26
The DSP mux channels are of type SCARLETT2_PORT_TYPE_MIX so the ALSA controls would refer to them "Mix X" and "Mixer Input X". This patch fixes them to be called "DSP X" and "DSP Input X". Signed-off-by: Geoffrey D. Bennett <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-29ALSA: scarlett2: Add support for DSP mux channelsGeoffrey D. Bennett1-3/+11
The DSP mux channels in the Scarlett 4th Gen appear as SCARLETT2_PORT_TYPE_MIX ports but do not have corresponding mixer controls. Add a dsp_count option to the device info struct to exclude those DSP channels from the num_mix_in/num_mix_out counts. Signed-off-by: Geoffrey D. Bennett <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-29ALSA: scarlett2: Add support for custom Gen 4 Direct Monitor mixesGeoffrey D. Bennett1-4/+141
The mixes used by Direct Monitor feature on the Scarlett 4th Gen Solo and 2i2 interfaces are configurable. This patch adds ALSA controls for the gains which are copied to the mixer when Direct Monitor is enabled. Signed-off-by: Geoffrey D. Bennett <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-29ALSA: scarlett2: Handle Gen 4 Direct Monitor mix updatesGeoffrey D. Bennett1-0/+12
When the Direct Monitor feature on the Scarlett 4th Gen Solo and 2i2 interfaces is used, the Mix A and B gains are updated by the interface. This patch calls snd_ctl_notify() for the ALSA mix controls when a Direct Monitor notification is received. Signed-off-by: Geoffrey D. Bennett <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-29ALSA: scarlett2: Store mix_ctls for Gen 4 Direct MonitorGeoffrey D. Bennett1-8/+42
The Scarlett 4th Gen small interfaces have a software-controllable mixer like the large 2nd and 3rd Gen interfaces do. Pressing the "Direct" button on the interface updates the mixer controls, which this driver hasn't needed to deal with previously. This commit stores the ALSA mixer controls, and adds a mix_updated flag so that the controls can be updated when a notification is received. Signed-off-by: Geoffrey D. Bennett <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-29ALSA: scarlett2: Add power status controlGeoffrey D. Bennett1-0/+123
Add a control to retrieve the power status from the interface (bus-powered, external-powered, or insufficient power). Mark the new scarlett2_notify_power_status() function with __always_unused until it gets used when the Gen 4 notification callback function arrays are added. Signed-off-by: Geoffrey D. Bennett <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-29ALSA: scarlett2: Disable autogain during phantom power state changeGeoffrey D. Bennett1-10/+113
When phantom power is enabled or disabled, the autogain control cannot be enabled until the interface has signalled that the change is complete and the input is unmuted. Update those controls to be read-only during this time. Signed-off-by: Geoffrey D. Bennett <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2023-12-29ALSA: scarlett2: Disable input controls while autogain is runningGeoffrey D. Bennett1-25/+273
While the autogain function is running, the other input controls (select, link, gain, safe, level, air, and phantom) can't be modified. Update those controls to be read-only during this time. Signed-off-by: Geoffrey D. Bennett <[email protected]> Signed-off-by: Takashi Iwai <[email protected]> Link: https://lore.kernel.org/r/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.