| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Assign pmu.module so the driver can't be unloaded whilst in use.
Signed-off-by: Kim Phillips <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Commit:
2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs")
neglected to do so.
Fixes: 2ff40250691e ("perf/core, arch/x86: Use PERF_PMU_CAP_NO_EXCLUDE for exclusion incapable PMUs")
Signed-off-by: Kim Phillips <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
Erratum #1197 "IBS (Instruction Based Sampling) Register State May be
Incorrect After Restore From CC6" is published in a document:
"Revision Guide for AMD Family 19h Models 00h-0Fh Processors" 56683 Rev. 1.04 July 2021
https://bugzilla.kernel.org/show_bug.cgi?id=206537
Implement the erratum's suggested workaround and ignore IBS samples if
MSRC001_1031 == 0.
Signed-off-by: Kim Phillips <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The u32 variable pci_dword is being masked with 0x1fffffff and then left
shifted 23 places. The shift is a u32 operation,so a value of 0x200 or
more in pci_dword will overflow the u32 and only the bottow 32 bits
are assigned to addr. I don't believe this was the original intent.
Fix this by casting pci_dword to a resource_size_t to ensure no
overflow occurs.
Note that the mask and 12 bit left shift operation does not need this
because the mask SNR_IMC_MMIO_MEM0_MASK and shift is always a 32 bit
value.
Fixes: ee49532b38dd ("perf/x86/intel/uncore: Add IMC uncore support for Snow Ridge")
Addresses-Coverity: ("Unintentional integer overflow")
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Signed-off-by: Ingo Molnar <[email protected]>
Reviewed-by: Kan Liang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
and TX error counters
This patch fixes the interchanged fetch of the CAN RX and TX error
counters from the ESD_EV_CAN_ERROR_EXT message. The RX error counter
is really in struct rx_msg::data[2] and the TX error counter is in
struct rx_msg::data[3].
Fixes: 96d8e90382dc ("can: Add driver for esd CAN-USB/2 device")
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Stefan Mätje <[email protected]>
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
drivers/net/usb/asix_devices.c:757:60-65: WARNING: conversion to bool not needed here
Remove unneeded conversion to bool
Semantic patch information:
Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unneeded.
Generated by: scripts/coccinelle/misc/boolconv.cocci
Fixes: 7a141e64cf14 ("net: usb: asix: ax88772: move embedded PHY detection as early as possible")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: kernel test robot <[email protected]>
Reviewed-by: Oleksij Rempel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If the attempt to reserve a slot fails, we currently leak the XPT_BUSY
flag on the socket. Among other things, this make it impossible to close
the socket.
Fixes: 82011c80b3ec ("SUNRPC: Move svc_xprt_received() call sites")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: J. Bruce Fields <[email protected]>
|
|
The nbd->destroy_complete pointer is not really needed. For creating
a device without a specific index we now simplify skip devices marked
NBD_DESTROY_ON_DISCONNECT as there is not much point to reuse them.
For device creation with a specific index there is no real need to
treat the case of a requested but not finished disconnect different
than any other device that is being shutdown, i.e. we can just return
an error, as a slightly different race window would anyway.
Fixes: 6e4df4c64881 ("nbd: reduce the nbd_index_mutex scope")
Reported-by: Tetsuo Handa <[email protected]>
Reported-by: [email protected]
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Device marked as NBD_DESTROY_ON_DISCONNECT can and should be skipped
given that they won't survive the disconnect. So skip them and try
to grab a reference directly and just continue if the the devices
is being torn down or created and thus has a zero refcount.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Set nbd->index before releasing nbd_index_mutex, as populate_nbd_status()
might access nbd->index as soon as nbd_index_mutex is released.
Fixes: 6e4df4c64881 ("nbd: reduce the nbd_index_mutex scope")
Signed-off-by: Tetsuo Handa <[email protected]>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Previously nbd_index_mutex was held during whole add/remove/lookup
operations in order to guarantee that partially initialized devices are
not reachable via idr_find() or idr_for_each(). But now that partially
initialized devices become reachable as soon as idr_alloc() succeeds,
we need to skip partially initialized devices. Since it seems that
all functions use refcount_inc_not_zero(&nbd->refs) in order to skip
destroying devices, update nbd->refs from zero to non-zero as the last
step of device initialization in order to also skip partially initialized
devices.
Fixes: 6e4df4c64881 ("nbd: reduce the nbd_index_mutex scope")
Signed-off-by: Tetsuo Handa <[email protected]>
[hch: split from a larger patch, added comments]
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
When nbd_genl_connect restarts to wait for a disconnecting device, nbd
needs to be reset to NULL. Do that by facoring out a helper to find
an unused device.
Fixes: 6177b56c96ff ("nbd: refactor device search and allocation in nbd_genl_connect")
Reported-by: Tetsuo Handa <[email protected]>
Reported-by: Hillf Danton <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
idr_remove needs external synchronization.
Fixes: 6e4df4c64881 ("nbd: reduce the nbd_index_mutex scope")
Signed-off-by: Tetsuo Handa <[email protected]>
[hch: split from a larger patch]
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Merge fixes from Andrew Morton:
"2 patches.
Subsystems affected by this patch series: mm/memory-hotplug and
MAINTAINERS"
* emailed patches from Andrew Morton <[email protected]>:
MAINTAINERS: exfat: update my email address
mm/memory_hotplug: fix potential permanent lru cache disable
|
|
My email address in exfat entry will be not available in a few days.
Update it to my own kernel.org address.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If offline_pages failed after lru_cache_disable(), it forgot to do
lru_cache_enable() in error path. So we would have lru cache disabled
permanently in this case.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: d479960e44f2 ("mm: disable LRU pagevec during the migration temporarily")
Signed-off-by: Miaohe Lin <[email protected]>
Reviewed-by: David Hildenbrand <[email protected]>
Reviewed-by: Oscar Salvador <[email protected]>
Reviewed-by: Naoya Horiguchi <[email protected]>
Cc: Chris Goldsworthy <[email protected]>
Cc: Michal Hocko <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
GENPD core doesn't support handling performance state changes while
consumer device is runtime-suspended or when runtime PM is disabled.
GENPD core may override performance state that was configured by device
driver while RPM of the device was disabled or device was RPM-suspended.
Let's close that gap by allowing drivers to control performance state
while RPM of a consumer device is disabled and to set up performance
state of RPM-suspended device that will be applied by GENPD core on
RPM-resume of the device.
Fixes: 5937c3ce2122 ("PM: domains: Drop/restore performance state votes for devices at runtime PM")
Signed-off-by: Dmitry Osipenko <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
It turns out that the SIGIO/FASYNC situation is almost exactly the same
as the EPOLLET case was: user space really wants to be notified after
every operation.
Now, in a perfect world it should be sufficient to only notify user
space on "state transitions" when the IO state changes (ie when a pipe
goes from unreadable to readable, or from unwritable to writable). User
space should then do as much as possible - fully emptying the buffer or
what not - and we'll notify it again the next time the state changes.
But as with EPOLLET, we have at least one case (stress-ng) where the
kernel sent SIGIO due to the pipe being marked for asynchronous
notification, but the user space signal handler then didn't actually
necessarily read it all before returning (it read more than what was
written, but since there could be multiple writes, it could leave data
pending).
The user space code then expected to get another SIGIO for subsequent
writes - even though the pipe had been readable the whole time - and
would only then read more.
This is arguably a user space bug - and Colin King already fixed the
stress-ng code in question - but the kernel regression rules are clear:
it doesn't matter if kernel people think that user space did something
silly and wrong. What matters is that it used to work.
So if user space depends on specific historical kernel behavior, it's a
regression when that behavior changes. It's on us: we were silly to
have that non-optimal historical behavior, and our old kernel behavior
was what user space was tested against.
Because of how the FASYNC notification was tied to wakeup behavior, this
was first broken by commits f467a6a66419 and 1b6b26ae7053 ("pipe: fix
and clarify pipe read/write wakeup logic"), but at the time it seems
nobody noticed. Probably because the stress-ng problem case ends up
being timing-dependent too.
It was then unwittingly fixed by commit 3a34b13a88ca ("pipe: make pipe
writes always wake up readers") only to be broken again when by commit
3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal
loads").
And at that point the kernel test robot noticed the performance
refression in the stress-ng.sigio.ops_per_sec case. So the "Fixes" tag
below is somewhat ad hoc, but it matches when the issue was noticed.
Fix it for good (knock wood) by simply making the kill_fasync() case
separate from the wakeup case. FASYNC is quite rare, and we clearly
shouldn't even try to use the "avoid unnecessary wakeups" logic for it.
Link: https://lore.kernel.org/lkml/20210824151337.GC27667@xsang-OptiPlex-9020/
Fixes: 3b844826b6c6 ("pipe: avoid unnecessary EPOLLET wakeups under normal loads")
Reported-by: kernel test robot <[email protected]>
Tested-by: Oliver Sang <[email protected]>
Cc: Eric Biederman <[email protected]>
Cc: Colin Ian King <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull ucount fixes from Eric Biederman:
"This branch fixes a regression that made it impossible to increase
rlimits that had been converted to the ucount infrastructure, and also
fixes a reference counting bug where the reference was not incremented
soon enough.
The fixes are trivial and the bugs have been encountered in the wild,
and the fixes have been tested"
* 'for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
ucounts: Increase ucounts reference counter before the security hook
ucounts: Fix regression preventing increasing of rlimits in init_user_ns
|
|
|
|
|
|
kcalloc() is called to allocate memory for m->m_info, and if it fails,
ceph_mdsmap_destroy() behind the label out_err will be called:
ceph_mdsmap_destroy(m);
In ceph_mdsmap_destroy(), m->m_info is dereferenced through:
kfree(m->m_info[i].export_targets);
To fix this possible null-pointer dereference, check m->m_info before the
for loop to free m->m_info[i].export_targets.
[ jlayton: fix up whitespace damage
only kfree(m->m_info) if it's non-NULL ]
Reported-by: TOTE Robot <[email protected]>
Signed-off-by: Tuo Li <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
The ceph_cap_flush structures are usually dynamically allocated, but
the ceph_cap_snap has an embedded one.
When force umounting, the client will try to remove all the session
caps. During this, it will free them, but that should not be done
with the ones embedded in a capsnap.
Fix this by adding a new boolean that indicates that the cap flush is
embedded in a capsnap, and skip freeing it if that's set.
At the same time, switch to using list_del_init() when detaching the
i_list and g_list heads. It's possible for a forced umount to remove
these objects but then handle_cap_flushsnap_ack() races in and does the
list_del_init() again, corrupting memory.
Cc: [email protected]
URL: https://tracker.ceph.com/issues/52283
Signed-off-by: Xiubo Li <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
|
|
The rt_mutex based ww_mutex variant queues the new waiter first in the
lock's rbtree before evaluating the ww_mutex specific conditions which
might decide that the waiter should back out. This check and conditional
exit happens before the waiter is enqueued into the PI chain.
The failure handling at the call site assumes that the waiter, if it is the
top most waiter on the lock, is queued in the PI chain and then proceeds to
adjust the unmodified PI chain, which results in RB tree corruption.
Dequeue the waiter from the lock waiter list in the ww_mutex error exit
path to prevent this.
Fixes: add461325ec5 ("locking/rtmutex: Extend the rtmutex core to support ww_mutex")
Reported-by: Sebastian Siewior <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
The new rt_mutex_spin_on_onwer() loop checks whether the spinning waiter is
still the top waiter on the lock by utilizing rt_mutex_top_waiter(), which
is broken because that function contains a sanity check which dereferences
the top waiter pointer to check whether the waiter belongs to the
lock. That's wrong in the lockless spinwait case:
CPU 0 CPU 1
rt_mutex_lock(lock) rt_mutex_lock(lock);
queue(waiter0)
waiter0 == rt_mutex_top_waiter(lock)
rt_mutex_spin_on_onwer(lock, waiter0) { queue(waiter1)
waiter1 == rt_mutex_top_waiter(lock)
...
top_waiter = rt_mutex_top_waiter(lock)
leftmost = rb_first_cached(&lock->waiters);
-> signal
dequeue(waiter1)
destroy(waiter1)
w = rb_entry(leftmost, ....)
BUG_ON(w->lock != lock) <- UAF
The BUG_ON() is correct for the case where the caller holds lock->wait_lock
which guarantees that the leftmost waiter entry cannot vanish. For the
lockless spinwait case it's broken.
Create a new helper function which avoids the pointer dereference and just
compares the leftmost entry pointer with current's waiter pointer to
validate that currrent is still elegible for spinning.
Fixes: 992caf7f1724 ("locking/rtmutex: Add adaptive spinwait mechanism")
Reported-by: Sebastian Siewior <[email protected]>
Signed-off-by: Thomas Gleixner <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Per SDM, bit 2:0 of CPUID(0x14,1).EAX[2:0] reports the number of
configurable address ranges for filtering, not bit 1:0.
Signed-off-by: Xiaoyao Li <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Acked-by: Alexander Shishkin <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
vctrl_enable() and vctrl_disable() call regulator_enable() and
regulator_disable(), respectively. However, vctrl_* are regulator ops
and should not be calling the locked regulator APIs. Doing so results in
a lockdep warning.
Instead of exporting more internal regulator ops, model the ctrl supply
as an actual supply to vctrl-regulator. At probe time this driver still
needs to use the consumer API to fetch its constraints, but otherwise
lets the regulator core handle the upstream supply for it.
The enable/disable/is_enabled ops are not removed, but now only track
state internally. This preserves the original behavior with the ops
being available, but one could argue that the original behavior was
already incorrect: the internal state would not match the upstream
supply if that supply had another consumer that enabled the supply,
while vctrl-regulator was not enabled.
The lockdep warning is as follows:
WARNING: possible circular locking dependency detected
5.14.0-rc6 #2 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock:
ffffffc011306d00 (regulator_list_mutex){+.+.}-{3:3}, at:
regulator_lock_dependent (arch/arm64/include/asm/current.h:19
include/linux/ww_mutex.h:111
drivers/regulator/core.c:329)
but task is already holding lock:
ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at:
regulator_lock_recursive (drivers/regulator/core.c:156
drivers/regulator/core.c:263)
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (regulator_ww_class_mutex){+.+.}-{3:3}:
__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
include/asm-generic/atomic-long.h:29
kernel/locking/mutex.c:103
kernel/locking/mutex.c:144
kernel/locking/mutex.c:963)
ww_mutex_lock (kernel/locking/mutex.c:1199)
regulator_lock_recursive (drivers/regulator/core.c:156
drivers/regulator/core.c:263)
regulator_lock_dependent (drivers/regulator/core.c:343)
regulator_enable (drivers/regulator/core.c:2808)
set_machine_constraints (drivers/regulator/core.c:1536)
regulator_register (drivers/regulator/core.c:5486)
devm_regulator_register (drivers/regulator/devres.c:196)
reg_fixed_voltage_probe (drivers/regulator/fixed.c:289)
platform_probe (drivers/base/platform.c:1427)
[...]
-> #1 (regulator_ww_class_acquire){+.+.}-{0:0}:
regulator_lock_dependent (include/linux/ww_mutex.h:129
drivers/regulator/core.c:329)
regulator_enable (drivers/regulator/core.c:2808)
set_machine_constraints (drivers/regulator/core.c:1536)
regulator_register (drivers/regulator/core.c:5486)
devm_regulator_register (drivers/regulator/devres.c:196)
reg_fixed_voltage_probe (drivers/regulator/fixed.c:289)
[...]
-> #0 (regulator_list_mutex){+.+.}-{3:3}:
__lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4)
kernel/locking/lockdep.c:3174 (discriminator 4)
kernel/locking/lockdep.c:3789 (discriminator 4)
kernel/locking/lockdep.c:5015 (discriminator 4))
lock_acquire (arch/arm64/include/asm/percpu.h:39
kernel/locking/lockdep.c:438
kernel/locking/lockdep.c:5627)
__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
include/asm-generic/atomic-long.h:29
kernel/locking/mutex.c:103
kernel/locking/mutex.c:144
kernel/locking/mutex.c:963)
mutex_lock_nested (kernel/locking/mutex.c:1125)
regulator_lock_dependent (arch/arm64/include/asm/current.h:19
include/linux/ww_mutex.h:111
drivers/regulator/core.c:329)
regulator_enable (drivers/regulator/core.c:2808)
vctrl_enable (drivers/regulator/vctrl-regulator.c:400)
_regulator_do_enable (drivers/regulator/core.c:2617)
_regulator_enable (drivers/regulator/core.c:2764)
regulator_enable (drivers/regulator/core.c:308
drivers/regulator/core.c:2809)
_set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072)
dev_pm_opp_set_rate (drivers/opp/core.c:1164)
set_target (drivers/cpufreq/cpufreq-dt.c:62)
__cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216
drivers/cpufreq/cpufreq.c:2271)
cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2))
cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563)
subsys_interface_register (drivers/base/bus.c:?)
cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819)
dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344)
[...]
other info that might help us debug this:
Chain exists of:
regulator_list_mutex --> regulator_ww_class_acquire --> regulator_ww_class_mutex
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(regulator_ww_class_mutex);
lock(regulator_ww_class_acquire);
lock(regulator_ww_class_mutex);
lock(regulator_list_mutex);
*** DEADLOCK ***
6 locks held by swapper/0/1:
#0: ffffff8002d32188 (&dev->mutex){....}-{3:3}, at:
__device_driver_lock (drivers/base/dd.c:1030)
#1: ffffffc0111a0520 (cpu_hotplug_lock){++++}-{0:0}, at:
cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2792 (discriminator 2))
#2: ffffff8002a8d918 (subsys mutex#9){+.+.}-{3:3}, at:
subsys_interface_register (drivers/base/bus.c:1033)
#3: ffffff800341bb90 (&policy->rwsem){+.+.}-{3:3}, at:
cpufreq_online (include/linux/bitmap.h:285
include/linux/cpumask.h:405
drivers/cpufreq/cpufreq.c:1399)
#4: ffffffc011f0b7b8 (regulator_ww_class_acquire){+.+.}-{0:0}, at:
regulator_enable (drivers/regulator/core.c:2808)
#5: ffffff8004a77160 (regulator_ww_class_mutex){+.+.}-{3:3}, at:
regulator_lock_recursive (drivers/regulator/core.c:156
drivers/regulator/core.c:263)
stack backtrace:
CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.14.0-rc6 #2 7c8f8996d021ed0f65271e6aeebf7999de74a9fa
Hardware name: Google Scarlet (DT)
Call trace:
dump_backtrace (arch/arm64/kernel/stacktrace.c:161)
show_stack (arch/arm64/kernel/stacktrace.c:218)
dump_stack_lvl (lib/dump_stack.c:106 (discriminator 2))
dump_stack (lib/dump_stack.c:113)
print_circular_bug (kernel/locking/lockdep.c:?)
check_noncircular (kernel/locking/lockdep.c:?)
__lock_acquire (kernel/locking/lockdep.c:3052 (discriminator 4)
kernel/locking/lockdep.c:3174 (discriminator 4)
kernel/locking/lockdep.c:3789 (discriminator 4)
kernel/locking/lockdep.c:5015 (discriminator 4))
lock_acquire (arch/arm64/include/asm/percpu.h:39
kernel/locking/lockdep.c:438
kernel/locking/lockdep.c:5627)
__mutex_lock_common (include/asm-generic/atomic-instrumented.h:606
include/asm-generic/atomic-long.h:29
kernel/locking/mutex.c:103
kernel/locking/mutex.c:144
kernel/locking/mutex.c:963)
mutex_lock_nested (kernel/locking/mutex.c:1125)
regulator_lock_dependent (arch/arm64/include/asm/current.h:19
include/linux/ww_mutex.h:111
drivers/regulator/core.c:329)
regulator_enable (drivers/regulator/core.c:2808)
vctrl_enable (drivers/regulator/vctrl-regulator.c:400)
_regulator_do_enable (drivers/regulator/core.c:2617)
_regulator_enable (drivers/regulator/core.c:2764)
regulator_enable (drivers/regulator/core.c:308
drivers/regulator/core.c:2809)
_set_opp (drivers/opp/core.c:819 drivers/opp/core.c:1072)
dev_pm_opp_set_rate (drivers/opp/core.c:1164)
set_target (drivers/cpufreq/cpufreq-dt.c:62)
__cpufreq_driver_target (drivers/cpufreq/cpufreq.c:2216
drivers/cpufreq/cpufreq.c:2271)
cpufreq_online (drivers/cpufreq/cpufreq.c:1488 (discriminator 2))
cpufreq_add_dev (drivers/cpufreq/cpufreq.c:1563)
subsys_interface_register (drivers/base/bus.c:?)
cpufreq_register_driver (drivers/cpufreq/cpufreq.c:2819)
dt_cpufreq_probe (drivers/cpufreq/cpufreq-dt.c:344)
[...]
Reported-by: Brian Norris <[email protected]>
Fixes: f8702f9e4aa7 ("regulator: core: Use ww_mutex for regulators locking")
Fixes: e9153311491d ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
In commit e9153311491d ("regulator: vctrl-regulator: Avoid deadlock getting
and setting the voltage"), all calls to get/set the voltage of the
control regulator were switched to unlocked versions to avoid deadlocks.
However, the call in the probe path is done without regulator locks
held. In this case the locked version should be used.
Switch back to the locked regulator_get_voltage() in the probe path to
avoid any mishaps.
Fixes: e9153311491d ("regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage")
Signed-off-by: Chen-Yu Tsai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This reverts commit f2165627319ffd33a6217275e5690b1ab5c45763.
[BUG]
It's no longer possible to create compressed inline extent after commit
f2165627319f ("btrfs: compression: don't try to compress if we don't
have enough pages").
[CAUSE]
For compression code, there are several possible reasons we have a range
that needs to be compressed while it's no more than one page.
- Compressed inline write
The data is always smaller than one sector and the test lacks the
condition to properly recognize a non-inline extent.
- Compressed subpage write
For the incoming subpage compressed write support, we require page
alignment of the delalloc range.
And for 64K page size, we can compress just one page into smaller
sectors.
For those reasons, the requirement for the data to be more than one page
is not correct, and is already causing regression for compressed inline
data writeback. The idea of skipping one page to avoid wasting CPU time
could be revisited in the future.
[FIX]
Fix it by reverting the offending commit.
Reported-by: Zygo Blaxell <[email protected]>
Link: https://lore.kernel.org/linux-btrfs/[email protected]
Fixes: f2165627319f ("btrfs: compression: don't try to compress if we don't have enough pages")
CC: [email protected] # 4.4+
Signed-off-by: Qu Wenruo <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Fix a regression that passed a NULL device name to blk_trace_setup
accidentally.
Fixes: aebbb5831fbd ("sg: do not allocate a gendisk")
Reported-by: [email protected]
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Max Gurtovoy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Function 'bfq_entity_to_bfqq' is declared twice, so remove the
repeated declaration and blank line.
Cc: Paolo Valente <[email protected]>
Cc: Jens Axboe <[email protected]>
Signed-off-by: Shaokun Zhang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
dun_bytes needs to be less than or equal to the IV size of the
encryption mode, not just less than or equal to BLK_CRYPTO_MAX_IV_SIZE.
Currently this doesn't matter since blk_crypto_init_key() is never
actually passed invalid values, but we might as well fix this.
Fixes: a892c8d52c02 ("block: Inline encryption support for blk-mq")
Signed-off-by: Eric Biggers <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
This partially reverts commit 16c9afc776608324ca71c0bc354987bab532f51d.
Alex Bee reports a regression in 5.14 on their RK3328 SoC when
configuring the PL330 DMA controller:
| ------------[ cut here ]------------
| WARNING: CPU: 2 PID: 373 at kernel/dma/mapping.c:235 dma_map_resource+0x68/0xc0
| Modules linked in: spi_rockchip(+) fuse
| CPU: 2 PID: 373 Comm: systemd-udevd Not tainted 5.14.0-rc7 #1
| Hardware name: Pine64 Rock64 (DT)
| pstate: 80000005 (Nzcv daif -PAN -UAO -TCO BTYPE=--)
| pc : dma_map_resource+0x68/0xc0
| lr : pl330_prep_slave_fifo+0x78/0xd0
This appears to be because dma_map_resource() is being called for a
physical address which does not correspond to a memory address yet does
have a valid 'struct page' due to the way in which the vmemmap is
constructed.
Prior to 16c9afc77660 ("arm64/mm: drop HAVE_ARCH_PFN_VALID"), the arm64
implementation of pfn_valid() called memblock_is_memory() to return
'false' for such regions and the DMA mapping request would proceed.
However, now that we are using the generic implementation where only the
presence of the memory map entry is considered, we return 'true' and
erroneously fail with DMA_MAPPING_ERROR because we identify the region
as DRAM.
Although fixing this in the DMA mapping code is arguably the right fix,
it is a risky, cross-architecture change at this stage in the cycle. So
just revert arm64 back to its old pfn_valid() implementation for v5.14.
The change to the generic pfn_valid() code is preserved from the original
patch, so as to avoid impacting other architectures.
Cc: Catalin Marinas <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: Mike Rapoport <[email protected]>
Cc: Anshuman Khandual <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Reported-by: Alex Bee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
While running kselftests, Hangbin observed that sch_ets.sh often crashes,
and splats like the following one are seen in the output of 'dmesg':
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 159f12067 P4D 159f12067 PUD 159f13067 PMD 0
Oops: 0000 [#1] SMP NOPTI
CPU: 2 PID: 921 Comm: tc Not tainted 5.14.0-rc6+ #458
Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014
RIP: 0010:__list_del_entry_valid+0x2d/0x50
Code: 48 8b 57 08 48 b9 00 01 00 00 00 00 ad de 48 39 c8 0f 84 ac 6e 5b 00 48 b9 22 01 00 00 00 00 ad de 48 39 ca 0f 84 cf 6e 5b 00 <48> 8b 32 48 39 fe 0f 85 af 6e 5b 00 48 8b 50 08 48 39 f2 0f 85 94
RSP: 0018:ffffb2da005c3890 EFLAGS: 00010217
RAX: 0000000000000000 RBX: ffff9073ba23f800 RCX: dead000000000122
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffff9073ba23fbc8
RBP: ffff9073ba23f890 R08: 0000000000000001 R09: 0000000000000001
R10: 0000000000000001 R11: 0000000000000001 R12: dead000000000100
R13: ffff9073ba23fb00 R14: 0000000000000002 R15: 0000000000000002
FS: 00007f93e5564e40(0000) GS:ffff9073bba00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000014ad34000 CR4: 0000000000350ee0
Call Trace:
ets_qdisc_reset+0x6e/0x100 [sch_ets]
qdisc_reset+0x49/0x1d0
tbf_reset+0x15/0x60 [sch_tbf]
qdisc_reset+0x49/0x1d0
dev_reset_queue.constprop.42+0x2f/0x90
dev_deactivate_many+0x1d3/0x3d0
dev_deactivate+0x56/0x90
qdisc_graft+0x47e/0x5a0
tc_get_qdisc+0x1db/0x3e0
rtnetlink_rcv_msg+0x164/0x4c0
netlink_rcv_skb+0x50/0x100
netlink_unicast+0x1a5/0x280
netlink_sendmsg+0x242/0x480
sock_sendmsg+0x5b/0x60
____sys_sendmsg+0x1f2/0x260
___sys_sendmsg+0x7c/0xc0
__sys_sendmsg+0x57/0xa0
do_syscall_64+0x3a/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f93e44b8338
Code: 89 02 48 c7 c0 ff ff ff ff eb b5 0f 1f 80 00 00 00 00 f3 0f 1e fa 48 8d 05 25 43 2c 00 8b 00 85 c0 75 17 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 58 c3 0f 1f 80 00 00 00 00 41 54 41 89 d4 55
RSP: 002b:00007ffc0db737a8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 0000000061255c06 RCX: 00007f93e44b8338
RDX: 0000000000000000 RSI: 00007ffc0db73810 RDI: 0000000000000003
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000000
R10: 000000000000000b R11: 0000000000000246 R12: 0000000000000001
R13: 0000000000687880 R14: 0000000000000000 R15: 0000000000000000
Modules linked in: sch_ets sch_tbf dummy rfkill iTCO_wdt iTCO_vendor_support intel_rapl_msr intel_rapl_common joydev i2c_i801 pcspkr i2c_smbus lpc_ich virtio_balloon ip_tables xfs libcrc32c crct10dif_pclmul crc32_pclmul crc32c_intel ahci libahci ghash_clmulni_intel libata serio_raw virtio_blk virtio_console virtio_net net_failover failover sunrpc dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000
When the change() function decreases the value of 'nstrict', we must take
into account that packets might be already enqueued on a class that flips
from 'strict' to 'quantum': otherwise that class will not be added to the
bandwidth-sharing list. Then, a call to ets_qdisc_reset() will attempt to
do list_del(&alist) with 'alist' filled with zero, hence the NULL pointer
dereference.
For classes flipping from 'strict' to 'quantum', initialize an empty list
and eventually add it to the bandwidth-sharing list, if there are packets
already enqueued. In this way, the kernel will:
a) prevent crashing as described above.
b) avoid retaining the backlog packets (for an arbitrarily long time) in
case no packet is enqueued after a change from 'strict' to 'quantum'.
Reported-by: Hangbin Liu <[email protected]>
Fixes: dcc68b4d8084 ("net: sch_ets: Add a new Qdisc")
Signed-off-by: Davide Caratti <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Thanks to Kees Cook who detected the problem of memset that starting
from not the first member, but sized for the whole struct.
The better change will be to remove the redundant memset and to clear
only the msix_cnt member.
Signed-off-by: Prabhakar Kushwaha <[email protected]>
Signed-off-by: Ariel Elior <[email protected]>
Signed-off-by: Shai Malin <[email protected]>
Reported-by: Kees Cook <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Ensure a valid XSK buffer before proceed to free the xdp buffer.
The following kernel panic is observed without this patch:
RIP: 0010:xp_free+0x5/0x40
Call Trace:
stmmac_napi_poll_rxtx+0x332/0xb30 [stmmac]
? stmmac_tx_timer+0x3c/0xb0 [stmmac]
net_rx_action+0x13d/0x3d0
__do_softirq+0xfc/0x2fb
? smpboot_register_percpu_thread+0xe0/0xe0
run_ksoftirqd+0x32/0x70
smpboot_thread_fn+0x1d8/0x2c0
kthread+0x169/0x1a0
? kthread_park+0x90/0x90
ret_from_fork+0x1f/0x30
---[ end trace 0000000000000002 ]---
Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy")
Cc: <[email protected]> # 5.13.x
Suggested-by: Ong Boon Leong <[email protected]>
Signed-off-by: Song Yoong Siang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
After free xsk_pool, there is possibility that napi polling is still
running in the middle, thus causes a kernel crash due to kernel NULL
pointer dereference of rx_q->xsk_pool and tx_q->xsk_pool.
Fix this by changing the XDP pool setup sequence to:
1. disable napi before free xsk_pool
2. enable napi after init xsk_pool
The following kernel panic is observed without this patch:
RIP: 0010:xsk_uses_need_wakeup+0x5/0x10
Call Trace:
stmmac_napi_poll_rxtx+0x3a9/0xae0 [stmmac]
__napi_poll+0x27/0x130
net_rx_action+0x233/0x280
__do_softirq+0xe2/0x2b6
run_ksoftirqd+0x1a/0x20
smpboot_thread_fn+0xac/0x140
? sort_range+0x20/0x20
kthread+0x124/0x150
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
---[ end trace a77c8956b79ac107 ]---
Fixes: bba2556efad6 ("net: stmmac: Enable RX via AF_XDP zero-copy")
Cc: <[email protected]> # 5.13.x
Signed-off-by: Song Yoong Siang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently, the install target in arch/x86/Makefile descends into
arch/x86/boot/Makefile to invoke the shell script, but there is no
good reason to do so.
arch/x86/Makefile can run the shell script directly.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
Commit
f279b49f13bd ("x86/boot: Modernize genimage script; hdimage+EFI support")
removed the bzlilo target from arch/x86/boot/Makefile.
Remove the left-over from arch/x86/Makefile.
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
macb_ptp_desc will not return NULL under most circumstances with correct
Kconfig and IP design config register. But for the sake of the extreme
corner case, check for NULL when using the helper. In case of rx_tstamp,
no action is necessary except to return (similar to timestamp disabled)
and warn. In case of TX, return -EINVAL to let the skb be free. Perform
this check before marking skb in progress.
Fixes coverity warning:
(4) Event dereference:
Dereferencing a null pointer "desc_ptp"
Signed-off-by: Harini Katakam <[email protected]>
Reviewed-by: Radhey Shyam Pandey <[email protected]>
Signed-off-by: Michal Simek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This reverts commit 2c896fb02e7f65299646f295a007bda043e0f382
"net: stmmac: dwmac-rk: add pd_gmac support for rk3399" and fixes
unbalanced pm_runtime_enable warnings.
In the commit to be reverted, support for power management was
introduced to the Rockchip glue code. Later, power management support
was introduced to the stmmac core code, resulting in multiple
invocations of pm_runtime_{enable,disable,get_sync,put_sync}.
The multiple invocations happen in rk_gmac_powerup and
stmmac_{dvr_probe, resume} as well as in rk_gmac_powerdown and
stmmac_{dvr_remove, suspend}, respectively, which are always called
in conjunction.
Fixes: 5ec55823438e850c91c6b92aec93fb04ebde29e2 ("net: stmmac: add clocks management for gmac driver")
Signed-off-by: Michael Riesch <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Generate kvm hypercall functions with a macro instead of duplicating
the more or less identical code seven times. This also reduces number
of lines of code.
However the main purpose is to get rid of as many as possible open
coded error prone register asm constructs in s390 architecture code.
For the only user of kvm_hypercall identical code is created
before/after this patch (drivers/s390/virtio/virtio_ccw.c).
Reviewed-by: Christian Borntraeger <[email protected]>
Acked-by: Christian Borntraeger <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Add tracing of interactions between the SCLP base driver, firmware and
other drivers to support problem determination in case of SCLP-related
issues.
For that purpose this patch introduces two new s390dbf debug areas:
- sclp: An abbreviated log of all common interactions
- sclp_err: A full log of failed or abnormal interactions
Tracing of full SCCB contents can be enabled for the sclp area by
setting its debug level to maximum (6).
Overview of added trace events:
* Firmware interaction:
- SRV1: Service call about to be issued
- SRV2: Service call was issued
- INT: Interrupt received
* Driver interaction:
- RQAD: Request was added
- RQOK: Request success
- RQAB: Request aborted
- RQTM: Request timed out
- REG: Event listener registered
- UREG: Event listener unregistered
- EVNT: Event callback
- STCG: State-change callback
* Abnormal events:
- TMO: A timeout occurred
- UNEX: Unexpected SCCB completion
* Other (not traced at default level):
- SYN1: Synchronous wait start
- SYN2: Synchronous wait end
Since the SCLP interface is used by console drivers this patch also
moves s390dbf printks outside the critical section protected by debug
area locks to prevent a potential deadlock that would otherwise be
introduced between console_owner --> sclp_lock --> sclp_debug.lock.
Signed-off-by: Peter Oberparleiter <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Debug areas can currently only be used after s390dbf initialization
which occurs as a postcore_initcall. This is too late for tracing
earlier code such as that related to console_init().
This patch introduces a macro for defining a statically initialized
debug area that can be used to trace very early code. The macro is made
available for built-in code only because modules are never running
during early boot.
Example usage:
1. Define static debug area:
DEFINE_STATIC_DEBUG_INFO(my_debug, "my_debug", 4, 1, 16,
&debug_hex_ascii_view);
2. Add trace entry:
debug_event(&my_debug, 0, "DATA", 4);
Note: The debug area is automatically registered in debugfs during boot.
A driver must not call any of the debug_register()/_unregister()
functions on a static debug_info_t!
Signed-off-by: Peter Oberparleiter <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Currently allocation and registration of s390dbf debug areas are tied
together. As a result, a debug area cannot be unregistered and
re-registered while any process has an associated debugfs file open.
Fix this by splitting alloc/release from register/unregister.
Signed-off-by: Peter Oberparleiter <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Any previously recorded s390dbf debug data is reset when a debug area
is resized using the 'pages' sysfs attribute. This can make
live-debugging unnecessarily complex.
Fix this by copying existing debug data to the newly allocated debug
area when resizing.
Signed-off-by: Peter Oberparleiter <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Avoid that the "restart_part2" label, which is in the middle of a
function, appears in /proc/kallsyms.
Signed-off-by: Heiko Carstens <[email protected]>
|
|
In case of splitting to 4k mapping the early exit in walk_pte_level()
must only be taken iff flags is equal to SET_MEMORY_4K.
Currently the early exit is taken if the flag is set, and also others
might be set. This may lead to the situation that a mapping is split
but other changes are not done, like e.g. setting pages to R/W.
There is currently no such caller, but there might be in the future.
Fixes: b3e1a00c8fa4 ("s390/mm: implement set_memory_4k()")
Signed-off-by: Heiko Carstens <[email protected]>
|
|
Rename amod31 to amode31 like it was supposed to be.
Fixes: c78d0c7484f0 ("s390: rename dma section to amode31")
Signed-off-by: Heiko Carstens <[email protected]>
|