Age | Commit message (Collapse) | Author | Files | Lines |
|
Proper warnings with stack traces make it much easier to figure out
what's doing the double free and create more meaningful bug reports from
users.
Signed-off-by: Jason A. Donenfeld <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When removing a cbs instance when offloading is enabled, the crash
below can be observed.
The problem happens because that when offloading is enabled, the cbs
instance is not added to the list.
Also, the current code doesn't handle correctly the case when offload
is disabled without removing the qdisc: if the link speed changes the
credit calculations will be wrong. When we create the cbs instance
with offloading enabled, it's not added to the notification list, when
later we disable offloading, it's not in the list, so link speed
changes will not affect it.
The solution for both issues is the same, add the cbs instance being
created unconditionally to the global list, even if the link state
notification isn't useful "right now".
Crash log:
[518758.189866] BUG: kernel NULL pointer dereference, address: 0000000000000000
[518758.189870] #PF: supervisor read access in kernel mode
[518758.189871] #PF: error_code(0x0000) - not-present page
[518758.189872] PGD 0 P4D 0
[518758.189874] Oops: 0000 [#1] SMP PTI
[518758.189876] CPU: 3 PID: 4825 Comm: tc Not tainted 5.2.9 #1
[518758.189877] Hardware name: Gigabyte Technology Co., Ltd. Z390 AORUS ULTRA/Z390 AORUS ULTRA-CF, BIOS F7 03/14/2019
[518758.189881] RIP: 0010:__list_del_entry_valid+0x29/0xa0
[518758.189883] Code: 90 48 b8 00 01 00 00 00 00 ad de 55 48 8b 17 4c 8b 47 08 48 89 e5 48 39 c2 74 27 48 b8 00 02 00 00 00 00 ad de 49 39 c0 74 2d <49> 8b 30 48 39 fe 75 3d 48 8b 52 08 48 39 f2 75 4c b8 01 00 00 00
[518758.189885] RSP: 0018:ffffa27e43903990 EFLAGS: 00010207
[518758.189887] RAX: dead000000000200 RBX: ffff8bce69f0f000 RCX: 0000000000000000
[518758.189888] RDX: 0000000000000000 RSI: ffff8bce69f0f064 RDI: ffff8bce69f0f1e0
[518758.189890] RBP: ffffa27e43903990 R08: 0000000000000000 R09: ffff8bce69e788c0
[518758.189891] R10: ffff8bce62acd400 R11: 00000000000003cb R12: ffff8bce69e78000
[518758.189892] R13: ffff8bce69f0f140 R14: 0000000000000000 R15: 0000000000000000
[518758.189894] FS: 00007fa1572c8f80(0000) GS:ffff8bce6e0c0000(0000) knlGS:0000000000000000
[518758.189895] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[518758.189896] CR2: 0000000000000000 CR3: 000000040a398006 CR4: 00000000003606e0
[518758.189898] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[518758.189899] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[518758.189900] Call Trace:
[518758.189904] cbs_destroy+0x32/0xa0 [sch_cbs]
[518758.189906] qdisc_destroy+0x45/0x120
[518758.189907] qdisc_put+0x25/0x30
[518758.189908] qdisc_graft+0x2c1/0x450
[518758.189910] tc_get_qdisc+0x1c8/0x310
[518758.189912] ? get_page_from_freelist+0x91a/0xcb0
[518758.189914] rtnetlink_rcv_msg+0x293/0x360
[518758.189916] ? kmem_cache_alloc_node_trace+0x178/0x260
[518758.189918] ? __kmalloc_node_track_caller+0x38/0x50
[518758.189920] ? rtnl_calcit.isra.0+0xf0/0xf0
[518758.189922] netlink_rcv_skb+0x48/0x110
[518758.189923] rtnetlink_rcv+0x10/0x20
[518758.189925] netlink_unicast+0x15b/0x1d0
[518758.189926] netlink_sendmsg+0x1ea/0x380
[518758.189929] sock_sendmsg+0x2f/0x40
[518758.189930] ___sys_sendmsg+0x295/0x2f0
[518758.189932] ? ___sys_recvmsg+0x151/0x1e0
[518758.189933] ? do_wp_page+0x7e/0x450
[518758.189935] __sys_sendmsg+0x48/0x80
[518758.189937] __x64_sys_sendmsg+0x1a/0x20
[518758.189939] do_syscall_64+0x53/0x1f0
[518758.189941] entry_SYSCALL_64_after_hwframe+0x44/0xa9
[518758.189942] RIP: 0033:0x7fa15755169a
[518758.189944] Code: 48 c7 c0 ff ff ff ff eb be 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 18 b8 2e 00 00 00 c5 fc 77 0f 05 <48> 3d 00 f0 ff ff 77 5e c3 0f 1f 44 00 00 48 83 ec 28 89 54 24 1c
[518758.189946] RSP: 002b:00007ffda58b60b8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
[518758.189948] RAX: ffffffffffffffda RBX: 000055e4b836d9a0 RCX: 00007fa15755169a
[518758.189949] RDX: 0000000000000000 RSI: 00007ffda58b6128 RDI: 0000000000000003
[518758.189951] RBP: 00007ffda58b6190 R08: 0000000000000001 R09: 000055e4b9d848a0
[518758.189952] R10: 0000000000000000 R11: 0000000000000246 R12: 000000005d654b49
[518758.189953] R13: 0000000000000000 R14: 00007ffda58b6230 R15: 00007ffda58b6210
[518758.189955] Modules linked in: sch_cbs sch_etf sch_mqprio netlink_diag unix_diag e1000e igb intel_pch_thermal thermal video backlight pcc_cpufreq
[518758.189960] CR2: 0000000000000000
[518758.189961] ---[ end trace 6a13f7aaf5376019 ]---
[518758.189963] RIP: 0010:__list_del_entry_valid+0x29/0xa0
[518758.189964] Code: 90 48 b8 00 01 00 00 00 00 ad de 55 48 8b 17 4c 8b 47 08 48 89 e5 48 39 c2 74 27 48 b8 00 02 00 00 00 00 ad de 49 39 c0 74 2d <49> 8b 30 48 39 fe 75 3d 48 8b 52 08 48 39 f2 75 4c b8 01 00 00 00
[518758.189967] RSP: 0018:ffffa27e43903990 EFLAGS: 00010207
[518758.189968] RAX: dead000000000200 RBX: ffff8bce69f0f000 RCX: 0000000000000000
[518758.189969] RDX: 0000000000000000 RSI: ffff8bce69f0f064 RDI: ffff8bce69f0f1e0
[518758.189971] RBP: ffffa27e43903990 R08: 0000000000000000 R09: ffff8bce69e788c0
[518758.189972] R10: ffff8bce62acd400 R11: 00000000000003cb R12: ffff8bce69e78000
[518758.189973] R13: ffff8bce69f0f140 R14: 0000000000000000 R15: 0000000000000000
[518758.189975] FS: 00007fa1572c8f80(0000) GS:ffff8bce6e0c0000(0000) knlGS:0000000000000000
[518758.189976] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[518758.189977] CR2: 0000000000000000 CR3: 000000040a398006 CR4: 00000000003606e0
[518758.189979] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[518758.189980] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Fixes: e0a7683d30e9 ("net/sched: cbs: fix port_rate miscalculation")
Signed-off-by: Vinicius Costa Gomes <[email protected]>
Acked-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Kalle Valo <[email protected]>
Reviewed-by: Leon Romanovsky <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Adjust indentation from spaces to tab (+optional two spaces) as in
coding style with command like:
$ sed -e 's/^ /\t/' -i */Kconfig
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Sven Eckelmann <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Yanjun has been spending quite a lot of time fixing bugs
in FORCEDETH source code. I'd like to add Yanjun to maintainers
list.
Signed-off-by: Rain River <[email protected]>
Acked-by: Zhu Yanjun <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Some recent changes in latest Clang started causing the following
warning when unrolling strobemeta test case main loop:
progs/strobemeta.h:416:2: warning: loop not unrolled: the optimizer was
unable to perform the requested transformation; the transformation might
be disabled or specified as part of an unsupported transformation
ordering [-Wpass-failed=transform-warning]
This patch simplifies loop's exit condition to depend only on constant
max iteration number (STROBE_MAX_MAP_ENTRIES), while moving early
termination logic inside the loop body. The changes are equivalent from
program logic standpoint, but fixes the warning. It also appears to
improve generated BPF code, as it fixes previously failing non-unrolled
strobemeta test cases.
Cc: Alexei Starovoitov <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Remove no longer used variables and avoid compiler warnings.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
Some compilers emit warning for potential uninitialized next_id usage.
The code is correct, but control flow is too complicated for some
compilers to figure this out. Re-initialize next_id to satisfy
compiler.
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
When kzalloc() failed, NULL was returned to the caller, which
tested the pointer with IS_ERR(), which didn't match, so the
pointer was used later, resulting in a NULL dereference.
Return ERR_PTR(-ENOMEM) instead of NULL.
Reported-by: [email protected]
Fixes: 0402acd683c6 ("xsk: remove AF_XDP socket from map when the socket is released")
Signed-off-by: Jonathan Lemon <[email protected]>
Acked-by: Björn Töpel <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
This is the same problem I found earlier in test_sockopt_inherit:
there is a race between server thread doing accept() and client
thread doing connect(). Let's explicitly synchronize them via
pthread conditional variable.
v2:
* don't exit from server_thread without signaling condvar,
fixes possible issue where main() would wait forever (Andrii Nakryiko)
Fixes: b55873984dab ("selftests/bpf: test BPF_SOCK_OPS_RTT_CB")
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
|
|
macb_64b_desc is always called when HW_DMA_CAP_64B is defined.
So the return NULL can never be reached. Remove the dead code.
Signed-off-by: Shubhrajyoti Datta <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The Flow Control selftest is also available with ASYM Pause. Lets add
this check to the test and fix eventual false positive failures.
Fixes: 091810dbded9 ("net: stmmac: Introduce selftests support")
Signed-off-by: Jose Abreu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix sparse warning:
drivers/net/ethernet/freescale/gianfar.c:2070:6:
warning: symbol 'reset_gfar' was not declared. Should it be static?
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: YueHaibing <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There is a statement that is indented one level too many, remove
the extraneous tab.
Signed-off-by: Colin Ian King <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When ppp is closing, __ppp_xmit_process() failed to enqueue skb
and skb allocated in ppp_write() is leaked.
syzbot reported :
BUG: memory leak
unreferenced object 0xffff88812a17bc00 (size 224):
comm "syz-executor673", pid 6952, jiffies 4294942888 (age 13.040s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<00000000d110fff9>] kmemleak_alloc_recursive include/linux/kmemleak.h:43 [inline]
[<00000000d110fff9>] slab_post_alloc_hook mm/slab.h:522 [inline]
[<00000000d110fff9>] slab_alloc_node mm/slab.c:3262 [inline]
[<00000000d110fff9>] kmem_cache_alloc_node+0x163/0x2f0 mm/slab.c:3574
[<000000002d616113>] __alloc_skb+0x6e/0x210 net/core/skbuff.c:197
[<000000000167fc45>] alloc_skb include/linux/skbuff.h:1055 [inline]
[<000000000167fc45>] ppp_write+0x48/0x120 drivers/net/ppp/ppp_generic.c:502
[<000000009ab42c0b>] __vfs_write+0x43/0xa0 fs/read_write.c:494
[<00000000086b2e22>] vfs_write fs/read_write.c:558 [inline]
[<00000000086b2e22>] vfs_write+0xee/0x210 fs/read_write.c:542
[<00000000a2b70ef9>] ksys_write+0x7c/0x130 fs/read_write.c:611
[<00000000ce5e0fdd>] __do_sys_write fs/read_write.c:623 [inline]
[<00000000ce5e0fdd>] __se_sys_write fs/read_write.c:620 [inline]
[<00000000ce5e0fdd>] __x64_sys_write+0x1e/0x30 fs/read_write.c:620
[<00000000d9d7b370>] do_syscall_64+0x76/0x1a0 arch/x86/entry/common.c:296
[<0000000006e6d506>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fix this by freeing skb, if ppp is closing.
Fixes: 6d066734e9f0 ("ppp: avoid loop in xmit recursion detection code")
Reported-and-tested-by: [email protected]
Signed-off-by: Takeshi Misawa <[email protected]>
Reviewed-by: Guillaume Nault <[email protected]>
Tested-by: Guillaume Nault <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Juliet Kim says:
====================
net/ibmvnic: serialization fixes
This series includes two fixes. The first improves reset code to allow
linkwatch_event to proceed during reset. The second ensures that no more
than one thread runs in reset at a time.
v2:
- Separate change param reset from do_reset()
- Return IBMVNIC_OPEN_FAILED if __ibmvnic_open fails
- Remove setting wait_for_reset to false from __ibmvnic_reset(), this
is done in wait_for_reset()
- Move the check for force_reset_recovery from patch 1 to patch 2
v3:
- Restore reset’s successful return in open failure case
v4:
- Change resetting flag access to atomic
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
The current code allows more than one thread to run in reset. This can
corrupt struct adapter data. Check adapter->resetting before performing
a reset, if there is another reset running delay (100 msec) before trying
again.
Signed-off-by: Juliet Kim <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Commit a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset")
made the change to hold the RTNL lock during a reset to avoid deadlock
but linkwatch_event is fired during the reset and needs the RTNL lock.
That keeps linkwatch_event process from proceeding until the reset
is complete. The reset process cannot tolerate the linkwatch_event
processing after reset completes, so release the RTNL lock during the
process to allow a chance for linkwatch_event to run during reset.
This does not guarantee that the linkwatch_event will be processed as
soon as link state changes, but is an improvement over the current code
where linkwatch_event processing is always delayed, which prevents
transmissions on the device from being deactivated leading transmit
watchdog timer to time-out.
Release the RTNL lock before link state change and re-acquire after
the link state change to allow linkwatch_event to grab the RTNL lock
and run during the reset.
Fixes: a5681e20b541 ("net/ibmnvic: Fix deadlock problem in reset")
Signed-off-by: Juliet Kim <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The deletion of a flowtable after a flush in the same transaction
results in EBUSY. This patch adds an activation and deactivation of
flowtables in order to update the _use_ counter.
Signed-off-by: Laura Garcia Liebana <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
When CONFIG_UAPI_HEADER_TEST=y, exported headers are compile-tested to
make sure they can be included from user-space.
Currently, linux/netfilter_bridge/ebtables.h is excluded from the test
coverage. To make it join the compile-test, we need to fix the build
errors attached below.
For a case like this, we decided to use __u{8,16,32,64} variable types
in this discussion:
https://lkml.org/lkml/2019/6/5/18
Build log:
CC usr/include/linux/netfilter_bridge/ebtables.h.s
In file included from <command-line>:32:0:
./usr/include/linux/netfilter_bridge/ebtables.h:126:4: error: unknown type name ‘uint8_t’
uint8_t revision;
^~~~~~~
./usr/include/linux/netfilter_bridge/ebtables.h:139:4: error: unknown type name ‘uint8_t’
uint8_t revision;
^~~~~~~
./usr/include/linux/netfilter_bridge/ebtables.h:152:4: error: unknown type name ‘uint8_t’
uint8_t revision;
^~~~~~~
Signed-off-by: Masahiro Yamada <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
The debug code dereferences "skb" to print "skb->len" so we have to
print the message before we free "skb".
Fixes: f99fe49ff372 ("wil6210: add wil_netif_rx() helper function")
Signed-off-by: Dan Carpenter <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
Running old skge driver on PowerPC causes checksum errors
because hardware reported 1's complement checksum is in little-endian
byte order.
Reported-by: Benoit <[email protected]>
Signed-off-by: Stephen Hemminger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
struct archdr is only big enough to hold the header of various types of
arcnet packets. So to provide enough space to hold the data read from
hardware provide a buffer large enough to hold a packet with maximal
size.
The problem was noticed by the stack protector which makes the kernel
oops.
Signed-off-by: Uwe Kleine-König <[email protected]>
Acked-by: Michael Grzeschik <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The intention was to have the GEO_TX_POWER_LIMIT command in FW version
36 as well, but not all 8000 family got this feature enabled. The
8000 family is the only one using version 36, so skip this version
entirely. If we try to send this command to the firmwares that do not
support it, we get a BAD_COMMAND response from the firmware.
This fixes https://bugzilla.kernel.org/show_bug.cgi?id=204151.
Cc: [email protected] # 4.19+
Signed-off-by: Luca Coelho <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
mt7615 patch/n9/cr4 firmwares are available in mediatek folder in
linux-firmware repository. Because of this mt7615 won't work on regular
distributions like Ubuntu. Fix path definitions. Moreover remove useless
firmware name pointers and use definitions directly
Fixes: 04b8e65922f6 ("mt76: add mac80211 driver for MT7615 PCIe-based chipsets")
Cc: [email protected]
Signed-off-by: Lorenzo Bianconi <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
Greg Kroah-Hartman says:
====================
Raw socket cleanups
Ori Nimron pointed out that there are a number of places in the kernel
where you can create a raw socket, without having to have the
CAP_NET_RAW permission.
To resolve this, here's a short patch series to test these odd and old
protocols for this permission before allowing the creation to succeed
All patches are currently against the net tree.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
When creating a raw AF_NFC socket, CAP_NET_RAW needs to be checked
first.
Signed-off-by: Ori Nimron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When creating a raw AF_IEEE802154 socket, CAP_NET_RAW needs to be
checked first.
Signed-off-by: Ori Nimron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Acked-by: Stefan Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When creating a raw AF_AX25 socket, CAP_NET_RAW needs to be checked
first.
Signed-off-by: Ori Nimron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When creating a raw AF_APPLETALK socket, CAP_NET_RAW needs to be checked
first.
Signed-off-by: Ori Nimron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When creating a raw AF_ISDN socket, CAP_NET_RAW needs to be checked
first.
Signed-off-by: Ori Nimron <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If the allocation done in tcf_exts_init() failed,
we end up with a NULL pointer in exts->actions.
kasan: GPF could be caused by NULL-ptr deref or user memory access
general protection fault: 0000 [#1] PREEMPT SMP KASAN
CPU: 1 PID: 8198 Comm: syz-executor.3 Not tainted 5.3.0-rc8+ #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:tcf_action_destroy+0x71/0x160 net/sched/act_api.c:705
Code: c3 08 44 89 ee e8 4f cb bb fb 41 83 fd 20 0f 84 c9 00 00 00 e8 c0 c9 bb fb 48 89 d8 48 b9 00 00 00 00 00 fc ff df 48 c1 e8 03 <80> 3c 08 00 0f 85 c0 00 00 00 4c 8b 33 4d 85 f6 0f 84 9d 00 00 00
RSP: 0018:ffff888096e16ff0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: 0000000000000000 RCX: dffffc0000000000
RDX: 0000000000040000 RSI: ffffffff85b6ab30 RDI: 0000000000000000
RBP: ffff888096e17020 R08: ffff8880993f6140 R09: fffffbfff11cae67
R10: fffffbfff11cae66 R11: ffffffff88e57333 R12: 0000000000000000
R13: 0000000000000000 R14: ffff888096e177a0 R15: 0000000000000001
FS: 00007f62bc84a700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000758040 CR3: 0000000088b64000 CR4: 00000000001426e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
tcf_exts_destroy+0x38/0xb0 net/sched/cls_api.c:3030
tcindex_set_parms+0xf7f/0x1e50 net/sched/cls_tcindex.c:488
tcindex_change+0x230/0x318 net/sched/cls_tcindex.c:519
tc_new_tfilter+0xa4b/0x1c70 net/sched/cls_api.c:2152
rtnetlink_rcv_msg+0x838/0xb00 net/core/rtnetlink.c:5214
netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477
rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5241
netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline]
netlink_unicast+0x531/0x710 net/netlink/af_netlink.c:1328
netlink_sendmsg+0x8a5/0xd60 net/netlink/af_netlink.c:1917
sock_sendmsg_nosec net/socket.c:637 [inline]
sock_sendmsg+0xd7/0x130 net/socket.c:657
___sys_sendmsg+0x3e2/0x920 net/socket.c:2311
__sys_sendmmsg+0x1bf/0x4d0 net/socket.c:2413
__do_sys_sendmmsg net/socket.c:2442 [inline]
Fixes: 90b73b77d08e ("net: sched: change action API to use array of pointers to actions")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Vlad Buslov <[email protected]>
Cc: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In mlx5 parse_tunnel_attr() function dispatch on encap IP address type
is performed by directly checking flow_rule_match_key() on
FLOW_DISSECTOR_KEY_ENC_IPV4_ADDRS, and then on
FLOW_DISSECTOR_KEY_ENC_IPV6_ADDRS. However, since those are stored in
union, first check is always true if any type of encap address is set,
which leads to IPv6 tunnel encap address being parsed as IPv4 by mlx5.
Determine correct IP address type by checking control key first and if
it set, take address type from match.key->addr_type.
Fixes: d1bda7eecd88 ("net/mlx5e: Allow matching only enc_key_id/enc_dst_port for decapsulation action")
Signed-off-by: Dmytro Linkin <[email protected]>
Reviewed-by: Vlad Buslov <[email protected]>
Reviewed-by: Eli Britstein <[email protected]>
Reviewed-by: Roi Dayan <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Before this patch, when adding multiple ethtool steering rules with
identical classification, the driver used to append the new destination
to the already existing hw rule, which caused the hw to forward the
traffic to all destinations (rx queues).
Here we avoid this by setting the "no append" mlx5 fs core flag when
adding a new ethtool rule.
Fixes: 6dc6071cfcde ("net/mlx5e: Add ethtool flow steering support")
Signed-off-by: Saeed Mahameed <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Add the device ID of upcoming BlueField-2 integrated ConnectX-6 Dx
network controller. Its VFs will be using the generic VF device ID:
0x101e "ConnectX Family mlx5Gen Virtual Function".
Fixes: 2e9d3e83ab82 ("net/mlx5: Update the list of the PCI supported devices")
Signed-off-by: Bodong Wang <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
In case source_eswitch_owner_vhca_id is given as a match,
the source_vport (vhca_id) will be set in case vhca_id_valid.
This will allow matching on peer vports, vports that belong
to the other pf.
Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Alaa Hleihel <[email protected]>
Signed-off-by: Alex Vesker <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
When we free an STE and the STE is in the middle of collision
list, the prev_ste was obtained incorrectly from the list.
To avoid such issues list_entry calls replaced with standard list API.
Fixes: 26d688e33f88 ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Alex Vesker <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
The vport number is part of the vport_cap, there is no reason
to store in a separate variable on the vport.
Fixes: 9db810ed2d37 ("net/mlx5: DR, Expose steering action functionality")
Signed-off-by: Alex Vesker <[email protected]>
Reviewed-by: Maor Gottlieb <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
Fix wrong reserved bits offsets.
Fixes: 97b5484ed608 ("net/mlx5: Add HW bits and definitions required for SW steering")
Signed-off-by: Yevgeny Kliteynik <[email protected]>
Reviewed-by: Alex Vesker <[email protected]>
Signed-off-by: Saeed Mahameed <[email protected]>
|
|
After firmware has been downloaded, driver should send
some information to it through H2C commands. Those H2C
commands are transmitted through TX path.
But before HCI has been started, the TX path is not
working completely. Such as PCI interfaces, the interrupts
are not enabled, hence TX interrupts will not be issued
after H2C skb has been DMAed to the device. And the H2C
skbs will not be released until the device is powered off.
Signed-off-by: Yan-Hsuan Chuang <[email protected]>
Signed-off-by: Kalle Valo <[email protected]>
|
|
This patch corrects the SPDX License Identifier style
in header file for Distributed Switch Architecture drivers.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <[email protected]>
Signed-off-by: Nishad Kamdar <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This patch corrects the SPDX License Identifier style
in header file for Broadcom BCM53xx managed switch driver.
For C header files Documentation/process/license-rules.rst
mandates C-like comments (opposed to C source files where
C++ style should be used)
Changes made by using a script provided by Joe Perches here:
https://lkml.org/lkml/2019/2/7/46.
Suggested-by: Joe Perches <[email protected]>
Signed-off-by: Nishad Kamdar <[email protected]>
Reviewed-by: Vivien Didelot <[email protected]>
Reviewed-by: Florian Fainelli <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
We need to set the error code on this path. Otherwise it probably
results in a NULL dereference down the line.
Fixes: aa3198819bea ("ionic: Add RSS support")
Signed-off-by: Dan Carpenter <[email protected]>
Acked-by: Shannon Nelson <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If CONFIG_ENA_ETHERNET=y and CONFIG_DIMLIB=n,
below erros can be found:
drivers/net/ethernet/amazon/ena/ena_netdev.o: In function `ena_dim_work':
ena_netdev.c:(.text+0x21cc): undefined reference to `net_dim_get_rx_moderation'
ena_netdev.c:(.text+0x21cc): relocation truncated to
fit: R_AARCH64_CALL26 against undefined symbol `net_dim_get_rx_moderation'
drivers/net/ethernet/amazon/ena/ena_netdev.o: In function `ena_io_poll':
ena_netdev.c:(.text+0x7bd4): undefined reference to `net_dim'
ena_netdev.c:(.text+0x7bd4): relocation truncated to fit:
R_AARCH64_CALL26 against undefined symbol `net_dim'
After commit 282faf61a053 ("net: ena: switch to dim algorithm for rx adaptive
interrupt moderation"), it introduces dim algorithm, which configured by CONFIG_DIMLIB.
So, this patch is to select DIMLIB for ENA_ETHERNET.
Fixes: 282faf61a053 ("net: ena: switch to dim algorithm for rx adaptive interrupt moderation")
Signed-off-by: Mao Wenan <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Use 'skb_put_data()' instead of rewritting it.
This improves readability.
Signed-off-by: Christophe JAILLET <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Putting a struct stmmac_rss object on the stack is a bad idea,
as it exceeds the warning limit for a stack frame on 32-bit architectures:
drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c:1221:12: error: stack frame size of 1208 bytes in function '__stmmac_test_l3filt' [-Werror,-Wframe-larger-than=]
drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c:1338:12: error: stack frame size of 1208 bytes in function '__stmmac_test_l4filt' [-Werror,-Wframe-larger-than=]
As the object is the trivial empty case, change the called function
to accept a NULL pointer to mean the same thing and remove the
large variable in the two callers.
Fixes: 4647e021193d ("net: stmmac: selftests: Add selftest for L3/L4 Filters")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Jose Abreu <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If CONFIG_NET_DSA_SJA1105_TAS=y and CONFIG_NET_SCH_TAPRIO=n,
below error can be found:
drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_setup_tc_taprio':
sja1105_tas.c:(.text+0x318): undefined reference to `taprio_offload_free'
sja1105_tas.c:(.text+0x590): undefined reference to `taprio_offload_get'
drivers/net/dsa/sja1105/sja1105_tas.o: In function `sja1105_tas_teardown':
sja1105_tas.c:(.text+0x610): undefined reference to `taprio_offload_free'
make: *** [vmlinux] Error 1
sja1105_tas needs tc-taprio, so this patch add the dependency for it.
Fixes: 317ab5b86c8e ("net: dsa: sja1105: Configure the Time-Aware Scheduler via tc-taprio offload")
Signed-off-by: Mao Wenan <[email protected]>
Reviewed-by: Vladimir Oltean <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Similar to commit 8b4c3cdd9dd8
("net: sched: Add policy validation for tc attributes"), we need
to add proper policy validation for TC action attributes too.
Cc: David Ahern <[email protected]>
Cc: Jamal Hadi Salim <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The TCA_KIND attribute is of NLA_STRING which does not check
the NUL char. KMSAN reported an uninit-value of TCA_KIND which
is likely caused by the lack of NUL.
Change it to NLA_NUL_STRING and add a max len too.
Fixes: 8b4c3cdd9dd8 ("net: sched: Add policy validation for tc attributes")
Reported-and-tested-by: [email protected]
Cc: Jamal Hadi Salim <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Acked-by: Jiri Pirko <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The ARM netx platform got removed in 5.3, so this driver
is now useless.
Reported-by: Uwe Kleine-König <[email protected]>
Cc: Sascha Hauer <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|