aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2014-10-31Merge branch 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie8-17/+25
into drm-fixes - dpm stability fixes for SI and KV - remove an invalid pci id - kmalloc_array fixes - minor cleanups * 'drm-fixes-3.18' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: remove some buggy dead code drm/radeon: remove invalid pci id drm/radeon: dpm fixes for asrock systems radeon: clean up coding style differences in radeon_get_bios() drm/radeon: Use drm_malloc_ab instead of kmalloc_array drm/radeon/dpm: disable ulv support on SI
2014-10-31Merge tag 'drm-intel-fixes-2014-10-30' of ↵Dave Airlie2-3/+26
git://anongit.freedesktop.org/drm-intel into drm-fixes bunch of DP fixes, and some backlight fix. * tag 'drm-intel-fixes-2014-10-30' of git://anongit.freedesktop.org/drm-intel: drm/i915/dp: only use training pattern 3 on platforms that support it drm/i915: Ignore VBT backlight check on Macbook 2, 1 drm/i915: Fix GMBUSFREQ on vlv/chv drm/i915: Ignore long hpds on eDP ports drm/i915: Do a dummy DPCD read before the actual read
2014-10-30cxgb4 : Fix missing initialization of win0_lockAnish Bhatt1-0/+1
win0_lock was being used un-initialized, resulting in warning traces being seen when lock debugging is enabled (and just wrong) Fixes : fc5ab0209650 ('cxgb4: Replaced the backdoor mechanism to access the HW memory with PCIe Window method') Signed-off-by: Anish Bhatt <[email protected]> Signed-off-by: Casey Leedom <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-10-30Merge branch 'r8152-net'David S. Miller1-5/+9
Hayes Wang says: ==================== r8152: patches for autosuspend There are unexpected processes when enabling autosuspend. These patches are used to fix them. ==================== Signed-off-by: David S. Miller <[email protected]>
2014-10-30r8152: check WORK_ENABLE in suspend functionhayeswang1-1/+1
Avoid unnecessary behavior when autosuspend occurs during open(). The relative processes should only be run after finishing open(). Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-10-30r8152: reset tp->speed before autoresuming in open functionhayeswang1-0/+5
If (tp->speed & LINK_STATUS) is not zero, the rtl8152_resume() would call rtl_start_rx() before enabling the tx/rx. Avoid this by resetting it to zero. Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-10-30r8152: clear SELECTIVE_SUSPEND when autoresuminghayeswang1-4/+3
The flag of SELECTIVE_SUSPEND should be cleared when autoresuming. Otherwise, when the system suspend and resume occur, it may have the wrong flow. Besides, because the flag of SELECTIVE_SUSPEND couldn't be used to check if the hw enables the relative feature, it should alwayes be disabled in close(). Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2014-10-30rtlwifi: rtl8192se: Fix firmware loadingLarry Finger1-2/+2
An error in the code makes the allocated space for firmware to be too small. Signed-off-by: Larry Finger <[email protected]> Cc: Murilo Opsfelder Araujo <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2014-10-30rtlwifi: rtl8192ce: Add missing section to read descriptor settingLarry Finger2-0/+5
The new version of rtlwifi needs code in rtl92ce_get_desc() that returns the buffer address for read operations. Signed-off-by: Larry Finger <[email protected]> Cc: Murilo Opsfelder Araujo <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2014-10-30rtlwifi: rtl8192se: Add missing section to read descriptor settingLarry Finger2-0/+5
The new version of rtlwifi needs code in rtl92se_get_desc() that returns the buffer address for read operations. Signed-off-by: Larry Finger <[email protected]> Cc: Murilo Opsfelder Araujo <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2014-10-30rtlwifi: rtl8192se: Fix duplicate calls to ieee80211_register_hw()Larry Finger1-17/+0
Driver rtlwifi has been modified to call ieee80211_register_hw() from the probe routine; however, the existing call in the callback routine for deferred firmware loading was not removed. Signed-off-by: Larry Finger <[email protected]> Cc: Murilo Opsfelder Araujo <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2014-10-30rtlwifi: rtl8192ce: rtl8192de: rtl8192se: Fix handling for missing ↵Larry Finger5-0/+10
get_btc_status The recent changes in checking for Bluetooth status added some callbacks to code in rtlwifi. To make certain that all callbacks are defined, a dummy routine has been added to rtlwifi, and the drivers that need to use it are modified. Signed-off-by: Larry Finger <[email protected]> Cc: Murilo Opsfelder Araujo <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2014-10-30mwifiex: restart rxreorder timer correctlyMarc Yang3-12/+43
During 11n RX reordering, if there is a hole in RX table, driver will not send packets to kernel until the rxreorder timer expires or the table is full. However, currently driver always restarts rxreorder timer when receiving a packet, which causes the timer hardly to expire. So while connected with to 11n AP in a busy environment, ping packets may get blocked for about 30 seconds. This patch fixes this timer restarting by ensuring rxreorder timer would only be restarted either timer is not set or start_win has changed. Signed-off-by: Chin-Ran Lo <[email protected]> Signed-off-by: Plus Chen <[email protected]> Signed-off-by: Marc Yang <[email protected]> Signed-off-by: Cathy Luo <[email protected]> Signed-off-by: Avinash Patil <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2014-10-30ath9k: fix some debugfs outputDan Carpenter1-1/+1
The right shift operation has higher precedence than the mask so we left shift by "(i * 3)" and then immediately right shift by "(i * 3)" then we mask. It should be left shift, mask, and then right shift. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2014-10-30wireless: rt2x00: add new rt2800usb deviceCyril Brulebois1-0/+1
0x1b75 0xa200 AirLive WN-200USB wireless 11b/g/n dongle References: https://bugs.debian.org/766802 Reported-by: Martin Mokrejs <[email protected]> Cc: [email protected] Signed-off-by: Cyril Brulebois <[email protected]> Acked-by: Stanislaw Gruszka <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2014-10-30PCI: Rename sysfs 'enabled' file back to 'enable'Greg Kroah-Hartman1-4/+4
Back in commit 5136b2da770d ("PCI: convert bus code to use dev_groups"), I misstyped the 'enable' sysfs filename as 'enabled', which broke the userspace API. This patch fixes that issue by renaming the file back. Fixes: 5136b2da770d ("PCI: convert bus code to use dev_groups") Reported-by: Jeff Epler <[email protected]> Tested-by: Jeff Epler <[email protected]> # on v3.14-rt Signed-off-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> CC: [email protected] # 3.13
2014-10-30Merge tag 'fbdev-fixes-3.18' of ↵Linus Torvalds29-46/+67
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux Pull fbdev fixes from Tomi Valkeinen: - fix fb console option parsing - fixes for OMAPDSS/OMAPFB crashes related to module unloading and device/driver binding & unbinding. - fix for OMAP HDMI PLL locking failing in certain cases - misc minor fixes for atmel lcdfb and OMAP * tag 'fbdev-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: omap: dss: connector-analog-tv: Add missing module device table OMAPDSS: DSI: Fix PLL_SELFEQDCO field width OMAPDSS: fix dispc register dump for preload & mflag OMAPDSS: DISPC: fix mflag offset OMAPDSS: HDMI: fix regsd write OMAPDSS: HDMI: fix PLL GO bit handling OMAPFB: fix releasing overlays OMAPFB: fix overlay disable when freeing resources. OMAPDSS: apply: wait pending updates on manager disable OMAPFB: remove __exit annotation OMAPDSS: set suppress_bind_attrs OMAPFB: add missing MODULE_ALIAS() drivers: video: fbdev: atmel_lcdfb.c: remove unnecessary header video/console: Resolve several shadow warnings fbcon: Fix option parsing control flow in fb_console_setup
2014-10-30Merge tag 'sound-3.18-rc3' of ↵Linus Torvalds21-1484/+99
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Although the diffstat looks scary, it's just because of the removal of the dead code (s6000), thus it must not affect anything serious. Other than that, all small fixes. The only core fix is zero-clear for a PCM compat ioctl. The rest are driver-specific, bebob, sgtl500, adau1761, intel-sst, ad1889 and a few HD-audio quirks as usual" * tag 'sound-3.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - Add workaround for CMI8888 snoop behavior ALSA: pcm: Zero-clear reserved fields of PCM status ioctl in compat mode ALSA: bebob: Uninitialized id returned by saffirepro_both_clk_src_get ALSA: hda/realtek - New SSID for Headset quirk ALSA: ad1889: Fix probable mask then right shift defects ALSA: bebob: fix wrong decoding of clock information for Terratec PHASE 88 Rack FW ALSA: hda/realtek - Update restore default value for ALC283 ALSA: hda/realtek - Update restore default value for ALC282 ASoC: fsl: use strncpy() to prevent copying of over-long names ASoC: adau1761: Fix input PGA volume ASoC: s6000: remove driver ASoC: Intel: HSW/BDW only support S16 and S24 formats. ASoC: sgtl500: Document the required supplies
2014-10-30ext4: make ext4_ext_convert_to_initialized() return proper number of blocksJan Kara1-5/+4
ext4_ext_convert_to_initialized() can return more blocks than are actually allocated from map->m_lblk in case where initial part of the on-disk extent is zeroed out. Luckily this doesn't have serious consequences because the caller currently uses the return value only to unmap metadata buffers. Anyway this is a data corruption/exposure problem waiting to happen so fix it. Coverity-id: 1226848 Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]>
2014-10-30ext4: bail early when clearing inode journal flag failsJan Kara1-1/+6
When clearing inode journal flag, we call jbd2_journal_flush() to force all the journalled data to their final locations. Currently we ignore when this fails and continue clearing inode journal flag. This isn't a big problem because when jbd2_journal_flush() fails, journal is likely aborted anyway. But it can still lead to somewhat confusing results so rather bail out early. Coverity-id: 989044 Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]>
2014-10-30ext4: bail out from make_indexed_dir() on first errorJan Kara1-10/+18
When ext4_handle_dirty_dx_node() or ext4_handle_dirty_dirent_node() fail, there's really something wrong with the fs and there's no point in continuing further. Just return error from make_indexed_dir() in that case. Also initialize frames array so that if we return early due to error, dx_release() doesn't try to dereference uninitialized memory (which could happen also due to error in do_split()). Coverity-id: 741300 Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected]
2014-10-30jbd2: use a better hash function for the revoke tableTheodore Ts'o1-8/+2
The old hash function didn't work well for 64-bit block numbers, and used undefined (negative) shift right behavior. Use the generic 64-bit hash function instead. Signed-off-by: Theodore Ts'o <[email protected]> Reported-by: Andrey Ryabinin <[email protected]>
2014-10-30ext4: prevent bugon on race between write/fcntlDmitry Monakhov1-1/+1
O_DIRECT flags can be toggeled via fcntl(F_SETFL). But this value checked twice inside ext4_file_write_iter() and __generic_file_write() which result in BUG_ON inside ext4_direct_IO. Let's initialize iocb->private unconditionally. TESTCASE: xfstest:generic/036 https://patchwork.ozlabs.org/patch/402445/ #TYPICAL STACK TRACE: kernel BUG at fs/ext4/inode.c:2960! invalid opcode: 0000 [#1] SMP Modules linked in: brd iTCO_wdt lpc_ich mfd_core igb ptp dm_mirror dm_region_hash dm_log dm_mod CPU: 6 PID: 5505 Comm: aio-dio-fcntl-r Not tainted 3.17.0-rc2-00176-gff5c017 #161 Hardware name: Intel Corporation W2600CR/W2600CR, BIOS SE5C600.86B.99.99.x028.061320111235 06/13/2011 task: ffff88080e95a7c0 ti: ffff88080f908000 task.ti: ffff88080f908000 RIP: 0010:[<ffffffff811fabf2>] [<ffffffff811fabf2>] ext4_direct_IO+0x162/0x3d0 RSP: 0018:ffff88080f90bb58 EFLAGS: 00010246 RAX: 0000000000000400 RBX: ffff88080fdb2a28 RCX: 00000000a802c818 RDX: 0000040000080000 RSI: ffff88080d8aeb80 RDI: 0000000000000001 RBP: ffff88080f90bbc8 R08: 0000000000000000 R09: 0000000000001581 R10: 0000000000000000 R11: 0000000000000000 R12: ffff88080d8aeb80 R13: ffff88080f90bbf8 R14: ffff88080fdb28c8 R15: ffff88080fdb2a28 FS: 00007f23b2055700(0000) GS:ffff880818400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f23b2045000 CR3: 000000080cedf000 CR4: 00000000000407e0 Stack: ffff88080f90bb98 0000000000000000 7ffffffffffffffe ffff88080fdb2c30 0000000000000200 0000000000000200 0000000000000001 0000000000000200 ffff88080f90bbc8 ffff88080fdb2c30 ffff88080f90be08 0000000000000200 Call Trace: [<ffffffff8112ca9d>] generic_file_direct_write+0xed/0x180 [<ffffffff8112f2b2>] __generic_file_write_iter+0x222/0x370 [<ffffffff811f495b>] ext4_file_write_iter+0x34b/0x400 [<ffffffff811bd709>] ? aio_run_iocb+0x239/0x410 [<ffffffff811bd709>] ? aio_run_iocb+0x239/0x410 [<ffffffff810990e5>] ? local_clock+0x25/0x30 [<ffffffff810abd94>] ? __lock_acquire+0x274/0x700 [<ffffffff811f4610>] ? ext4_unwritten_wait+0xb0/0xb0 [<ffffffff811bd756>] aio_run_iocb+0x286/0x410 [<ffffffff810990e5>] ? local_clock+0x25/0x30 [<ffffffff810ac359>] ? lock_release_holdtime+0x29/0x190 [<ffffffff811bc05b>] ? lookup_ioctx+0x4b/0xf0 [<ffffffff811bde3b>] do_io_submit+0x55b/0x740 [<ffffffff811bdcaa>] ? do_io_submit+0x3ca/0x740 [<ffffffff811be030>] SyS_io_submit+0x10/0x20 [<ffffffff815ce192>] system_call_fastpath+0x16/0x1b Code: 01 48 8b 80 f0 01 00 00 48 8b 18 49 8b 45 10 0f 85 f1 01 00 00 48 03 45 c8 48 3b 43 48 0f 8f e3 01 00 00 49 83 7c 24 18 00 75 04 <0f> 0b eb fe f0 ff 83 ec 01 00 00 49 8b 44 24 18 8b 00 85 c0 89 RIP [<ffffffff811fabf2>] ext4_direct_IO+0x162/0x3d0 RSP <ffff88080f90bb58> Reported-by: Sasha Levin <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Signed-off-by: Dmitry Monakhov <[email protected]> Cc: [email protected]
2014-10-30ext4: remove extent status procfs files if journal load failsDarrick J. Wong1-2/+3
If we can't load the journal, remove the procfs files for the extent status information file to avoid leaking resources. Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected]
2014-10-30ext4: disallow changing journal_csum option during remountDarrick J. Wong1-0/+8
ext4 does not permit changing the metadata or journal checksum feature flag while mounted. Until we decide to support that, don't allow a remount to change the journal_csum flag (right now we silently fail to change anything). Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]>
2014-10-30ext4: enable journal checksum when metadata checksum feature enabledDarrick J. Wong1-0/+4
If metadata checksumming is turned on for the FS, we need to tell the journal to use checksumming too. Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected]
2014-10-30ext4: fix oops when loading block bitmap failedJan Kara1-0/+4
When we fail to load block bitmap in __ext4_new_inode() we will dereference NULL pointer in ext4_journal_get_write_access(). So check for error from ext4_read_block_bitmap(). Coverity-id: 989065 Cc: [email protected] Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]>
2014-10-30ext4: fix overflow when updating superblock backups after resizeJan Kara1-1/+1
When there are no meta block groups update_backups() will compute the backup block in 32-bit arithmetics thus possibly overflowing the block number and corrupting the filesystem. OTOH filesystems without meta block groups larger than 16 TB should be rare. Fix the problem by doing the counting in 64-bit arithmetics. Coverity-id: 741252 CC: [email protected] Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Theodore Ts'o <[email protected]> Reviewed-by: Lukas Czerner <[email protected]>
2014-10-30drm/i915/dp: only use training pattern 3 on platforms that support itJani Nikula1-2/+3
Ivybridge + 30" monitor prints a drm error on every modeset, since IVB doesn't support DP3 we should even bother trying to use it. This regression has been introduced in commit 06ea66b6bb445043dc25a9626254d5c130093199 Author: Todd Previte <[email protected]> Date: Mon Jan 20 10:19:39 2014 -0700 drm/i915: Enable 5.4Ghz (HBR2) link rate for Displayport 1.2-capable devices Reported-by: Dave Airlie <[email protected]> Reference: http://mid.gmane.org/[email protected] Cc: Todd Previte <[email protected]> Cc: [email protected] (3.15+) Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Jani Nikula <[email protected]>
2014-10-30Merge branch '3.18/omapdss-fixes' into 3.18/fbdev-fixesTomi Valkeinen26-23/+46
2014-10-30omap: dss: connector-analog-tv: Add missing module device tableMarek Belisko1-0/+2
Without that fix connector-analog-tv driver isn't probed when compiled as module. Signed-off-by: H. Nikolaus Schaller <[email protected]> Signed-off-by: Tomi Valkeinen <[email protected]>
2014-10-30ixgbe: fix race when setting advertised speedEmil Tantilov1-0/+4
Following commands: modprobe ixgbe ifconfig ethX up ethtool -s ethX advertise 0x020 can lead to "setup link failed with code -14" error due to the setup_link call racing with the SFP detection routine in the watchdog. This patch resolves this issue by protecting the setup_link call with check for __IXGBE_IN_SFP_INIT. Reported-by: Scott Harrison <[email protected]> Signed-off-by: Emil Tantilov <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2014-10-30ixgbe: need not repeat init skb with NULLJunwei Zhang1-1/+1
Signed-off-by: Martin Zhang <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2014-10-30igb: don't reuse pages with pfmemalloc flagRoman Gushchin1-1/+5
Incoming packet is dropped silently by sk_filter(), if the skb was allocated from pfmemalloc reserves and the corresponding socket is not marked with the SOCK_MEMALLOC flag. Igb driver allocates pages for DMA with __skb_alloc_page(), which calls alloc_pages_node() with the __GFP_MEMALLOC flag. So, in case of OOM condition, igb can get pages with pfmemalloc flag set. If an incoming packet hits the pfmemalloc page and is large enough (small packets are copying into the memory, allocated with netdev_alloc_skb_ip_align(), so they are not affected), it will be dropped. This behavior is ok under high memory pressure, but the problem is that the igb driver reuses these mapped pages. So, packets are still dropping even if all memory issues are gone and there is a plenty of free memory. In my case, some TCP sessions hang on a small percentage (< 0.1%) of machines days after OOMs. Fix this by avoiding reuse of such pages. Signed-off-by: Roman Gushchin <[email protected]> Tested-by: Aaron Brown "[email protected]" Signed-off-by: Jeff Kirsher <[email protected]>
2014-10-30e1000: unset IFF_UNICAST_FLT on WMware 82545EMFrancesco Ruggeri1-1/+4
VMWare's e1000 implementation does not seem to support unicast filtering. This can be observed by configuring a macvlan interface on eth0 in a VM in VMWare Fusion 5.0.5, and trying to use that interface instead of eth0. Tested on 3.16. Signed-off-by: Francesco Ruggeri <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2014-10-30Merge branch 'urgent-for-mingo' of ↵Ingo Molnar5-15/+66
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu into core/urgent Pull two RCU fixes from Paul E. McKenney: " - Complete the work of commit dd56af42bd82 (rcu: Eliminate deadlock between CPU hotplug and expedited grace periods), which was intended to allow synchronize_sched_expedited() to be safely used when holding locks acquired by CPU-hotplug notifiers. This commit makes the put_online_cpus() avoid the deadlock instead of just handling the get_online_cpus(). - Complete the work of commit 35ce7f29a44a (rcu: Create rcuo kthreads only for onlined CPUs), which was intended to allow RCU to avoid allocating unneeded kthreads on systems where the firmware says that there are more CPUs than are really present. This commit makes rcu_barrier() aware of the mismatch, so that it doesn't hang waiting for non-existent CPUs. " Signed-off-by: Ingo Molnar <[email protected]>
2014-10-30Merge tag 'perf-urgent-for-mingo' of ↵Ingo Molnar7-48/+131
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: - Fix report -F (abort, in_tx, mispredict, etc) segfaults for sample.data files without branch info (Jiri Olsa) - Add patch that should have went in a previous patchkit to use global cache provided by libunwind (Namhyung Kim) - Make CPUINFO_PROC an array to support different kernels, problem detected when the information reported via /proc/cpuinfo changed on ARM (Wang Nan) - 'perf probe' --demangle typo fix and a new --quiet option (Masami Hiramatsu) Signed-off-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2014-10-29mtd: cfi_cmdset_0001.c: fix resume for LH28F640BF chipsDmitry Eremin-Solenikov1-0/+2
After '#echo mem > /sys/power/state' some devices can not be properly resumed because apparently the MTD Partition Configuration Register has been reset to default thus the rootfs cannot be mounted cleanly on resume. An example of this can be found in the SA-1100 Developer's Manual at 9.5.3.3 where the second step of the Sleep Shutdown Sequence is described: "An internal reset is applied to the SA-1100. All units are reset...". As workaround we refresh the PCR value as done initially on chip setup. This behavior and the fix are confirmed by our tests done on 2 different Zaurus collie units with kernel 3.17. Fixes: 812c5fa82bae: ("mtd: cfi_cmdset_0001.c: add support for Sharp LH28F640BF NOR") Signed-off-by: Dmitry Eremin-Solenikov <[email protected]> Signed-off-by: Andrea Adami <[email protected]> Cc: <[email protected]> # 3.16+ Signed-off-by: Brian Norris <[email protected]>
2014-10-29mtd: omap: fix mtd devices not showing upFrans Klaver1-1/+1
Since commit 6d178ef2fd5e ("mtd: nand: Move ELM driver and rename as omap_elm"), I don't have any mtd devices present on my am335x. This changes the link order of the omap_elm and omap2 objects, causing them to probe in the wrong order. To fix this, make elm_config defer probing until the omap_elm driver is actually loaded. Signed-off-by: Frans Klaver <[email protected]> Acked-by: Roger Quadros <[email protected]> Signed-off-by: Brian Norris <[email protected]>
2014-10-29Merge branch 'akpm' (incoming from Andrew Morton)Linus Torvalds27-349/+394
Merge misc fixes from Andrew Morton: "21 fixes" * emailed patches from Andrew Morton <[email protected]>: (21 commits) mm/balloon_compaction: fix deflation when compaction is disabled sh: fix sh770x SCIF memory regions zram: avoid NULL pointer access in concurrent situation mm/slab_common: don't check for duplicate cache names ocfs2: fix d_splice_alias() return code checking mm: rmap: split out page_remove_file_rmap() mm: memcontrol: fix missed end-writeback page accounting mm: page-writeback: inline account_page_dirtied() into single caller lib/bitmap.c: fix undefined shift in __bitmap_shift_{left|right}() drivers/rtc/rtc-bq32k.c: fix register value memory-hotplug: clear pgdat which is allocated by bootmem in try_offline_node() drivers/rtc/rtc-s3c.c: fix initialization failure without rtc source clock kernel/kmod: fix use-after-free of the sub_info structure drivers/rtc/rtc-pm8xxx.c: rework to support pm8941 rtc mm, thp: fix collapsing of hugepages on madvise drivers: of: add return value to of_reserved_mem_device_init() mm: free compound page with correct order gcov: add ARM64 to GCOV_PROFILE_ALL fsnotify: next_i is freed during fsnotify_unmount_inodes. mm/compaction.c: avoid premature range skip in isolate_migratepages_range ...
2014-10-29mm/balloon_compaction: fix deflation when compaction is disabledKonstantin Khlebnikov1-0/+2
If CONFIG_BALLOON_COMPACTION=n balloon_page_insert() does not link pages with balloon and doesn't set PagePrivate flag, as a result balloon_page_dequeue() cannot get any pages because it thinks that all of them are isolated. Without balloon compaction nobody can isolate ballooned pages. It's safe to remove this check. Fixes: d6d86c0a7f8d ("mm/balloon_compaction: redesign ballooned pages management"). Signed-off-by: Konstantin Khlebnikov <[email protected]> Reported-by: Matt Mullins <[email protected]> Cc: <[email protected]> [3.17] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2014-10-29sh: fix sh770x SCIF memory regionsAndriy Skulysh1-3/+3
Resources scif1_resources & scif2_resources overlap. Actual SCIF region size is 0x10. This is regression from commit d850acf975be ("sh: Declare SCIF register base and IRQ as resources") Signed-off-by: Andriy Skulysh <[email protected]> Acked-by: Laurent Pinchart <[email protected]> Cc: Geert Uytterhoeven <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2014-10-29zram: avoid NULL pointer access in concurrent situationWeijie Yang1-4/+6
There is a rare NULL pointer bug in mem_used_total_show() and mem_used_max_store() in concurrent situation, like this: zram is not initialized, process A is a mem_used_total reader which runs periodically, while process B try to init zram. process A process B access meta, get a NULL value init zram, done init_done() is true access meta->mem_pool, get a NULL pointer BUG This patch fixes this issue. Signed-off-by: Weijie Yang <[email protected]> Acked-by: Minchan Kim <[email protected]> Acked-by: Sergey Senozhatsky <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2014-10-29mm/slab_common: don't check for duplicate cache namesMikulas Patocka1-10/+0
The SLUB cache merges caches with the same size and alignment and there was long standing bug with this behavior: - create the cache named "foo" - create the cache named "bar" (which is merged with "foo") - delete the cache named "foo" (but it stays allocated because "bar" uses it) - create the cache named "foo" again - it fails because the name "foo" is already used That bug was fixed in commit 694617474e33 ("slab_common: fix the check for duplicate slab names") by not warning on duplicate cache names when the SLUB subsystem is used. Recently, cache merging was implemented the with SLAB subsystem too, in 12220dea07f1 ("mm/slab: support slab merge")). Therefore we need stop checking for duplicate names even for the SLAB subsystem. This patch fixes the bug by removing the check. Signed-off-by: Mikulas Patocka <[email protected]> Acked-by: Christoph Lameter <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: David Rientjes <[email protected]> Cc: Joonsoo Kim <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2014-10-29ocfs2: fix d_splice_alias() return code checkingRichard Weinberger1-1/+1
d_splice_alias() can return a valid dentry, NULL or an ERR_PTR. Currently the code checks not for ERR_PTR and will cuase an oops in ocfs2_dentry_attach_lock(). Fix this by using IS_ERR_OR_NULL(). Signed-off-by: Richard Weinberger <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2014-10-29mm: rmap: split out page_remove_file_rmap()Johannes Weiner1-32/+46
page_remove_rmap() has too many branches on PageAnon() and is hard to follow. Move the file part into a separate function. Signed-off-by: Johannes Weiner <[email protected]> Reviewed-by: Michal Hocko <[email protected]> Cc: Vladimir Davydov <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2014-10-29mm: memcontrol: fix missed end-writeback page accountingJohannes Weiner4-109/+96
Commit 0a31bc97c80c ("mm: memcontrol: rewrite uncharge API") changed page migration to uncharge the old page right away. The page is locked, unmapped, truncated, and off the LRU, but it could race with writeback ending, which then doesn't unaccount the page properly: test_clear_page_writeback() migration wait_on_page_writeback() TestClearPageWriteback() mem_cgroup_migrate() clear PCG_USED mem_cgroup_update_page_stat() if (PageCgroupUsed(pc)) decrease memcg pages under writeback release pc->mem_cgroup->move_lock The per-page statistics interface is heavily optimized to avoid a function call and a lookup_page_cgroup() in the file unmap fast path, which means it doesn't verify whether a page is still charged before clearing PageWriteback() and it has to do it in the stat update later. Rework it so that it looks up the page's memcg once at the beginning of the transaction and then uses it throughout. The charge will be verified before clearing PageWriteback() and migration can't uncharge the page as long as that is still set. The RCU lock will protect the memcg past uncharge. As far as losing the optimization goes, the following test results are from a microbenchmark that maps, faults, and unmaps a 4GB sparse file three times in a nested fashion, so that there are two negative passes that don't account but still go through the new transaction overhead. There is no actual difference: old: 33.195102545 seconds time elapsed ( +- 0.01% ) new: 33.199231369 seconds time elapsed ( +- 0.03% ) The time spent in page_remove_rmap()'s callees still adds up to the same, but the time spent in the function itself seems reduced: # Children Self Command Shared Object Symbol old: 0.12% 0.11% filemapstress [kernel.kallsyms] [k] page_remove_rmap new: 0.12% 0.08% filemapstress [kernel.kallsyms] [k] page_remove_rmap Signed-off-by: Johannes Weiner <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Vladimir Davydov <[email protected]> Cc: <[email protected]> [3.17.x] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2014-10-29mm: page-writeback: inline account_page_dirtied() into single callerJohannes Weiner2-20/+4
A follow-up patch would have changed the call signature. To save the trouble, just fold it instead. Signed-off-by: Johannes Weiner <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Vladimir Davydov <[email protected]> Cc: <[email protected]> [3.17.x] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2014-10-29lib/bitmap.c: fix undefined shift in __bitmap_shift_{left|right}()Jan Kara1-2/+6
If __bitmap_shift_left() or __bitmap_shift_right() are asked to shift by a multiple of BITS_PER_LONG, they will try to shift a long value by BITS_PER_LONG bits which is undefined. Change the functions to avoid the undefined shift. Coverity id: 1192175 Coverity id: 1192174 Signed-off-by: Jan Kara <[email protected]> Cc: Rasmus Villemoes <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2014-10-29drivers/rtc/rtc-bq32k.c: fix register valuePavel Machek1-1/+1
Fix register value in bq32000 trickle charging. Mike reported that I'm using wrong value in one trickle-charging case, and after checking docs, I must admit he's right. Signed-off-by: Pavel Machek <[email protected]> Reported-by: Mike Bremford <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.