| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This patch moves INIT_WORK setup for cq_desc->cq_[rx,tx]_work into
isert_create_device_ib_res(), instead of being done each callback
invocation in isert_cq_[rx,tx]_callback().
This also fixes a 'INFO: trying to register non-static key' warning
when cancel_work_sync() is called before INIT_WORK has setup the
struct work_struct.
Reported-by: Or Gerlitz <[email protected]>
Cc: <[email protected]> #3.12+
Signed-off-by: Nicholas Bellinger <[email protected]>
|
|
When shutting down a target there is a race condition between
iscsit_del_np() and __iscsi_target_login_thread().
The latter sets the thread pointer to NULL, and the former
tries to issue kthread_stop() on that pointer without any
synchronization.
This patch moves the np->np_thread NULL assignment into
iscsit_del_np(), after kthread_stop() has completed. It also
removes the signal_pending() + np_state check, and only
exits when kthread_should_stop() is true.
Reported-by: Hannes Reinecke <[email protected]>
Cc: <[email protected]> #3.12+
Signed-off-by: Nicholas Bellinger <[email protected]>
|
|
Commit 22ceeee16eb8f0d04de3ef43a5174fb30ec18af9 ("pwm-backlight: Add
power supply support") added a mandatory power supply for the PWM
backlight. Add a fixed 5V regulator to board code with a consumer supply
entry for the backlight device.
Signed-off-by: Laurent Pinchart <[email protected]>
Signed-off-by: Simon Horman <[email protected]>
(cherry picked from commit ad11cb9a5cf96346f1240995c672cdbb5501785c)
Signed-off-by: Simon Horman <[email protected]>
|
|
Merge patches from Andrew Morton:
"23 fixes and a MAINTAINERS update"
* emailed patches from Andrew Morton <[email protected]>: (24 commits)
mm/hugetlb: check for pte NULL pointer in __page_check_address()
fix build with make 3.80
mm/mempolicy: fix !vma in new_vma_page()
MAINTAINERS: add Davidlohr as GPT maintainer
mm/memory-failure.c: recheck PageHuge() after hugetlb page migrate successfully
mm/compaction: respect ignore_skip_hint in update_pageblock_skip
mm/mempolicy: correct putback method for isolate pages if failed
mm: add missing dependency in Kconfig
sh: always link in helper functions extracted from libgcc
mm: page_alloc: exclude unreclaimable allocations from zone fairness policy
mm: numa: defer TLB flush for THP migration as long as possible
mm: numa: guarantee that tlb_flush_pending updates are visible before page table updates
mm: fix TLB flush race between migration, and change_protection_range
mm: numa: avoid unnecessary disruption of NUMA hinting during migration
mm: numa: clear numa hinting information on mprotect
sched: numa: skip inaccessible VMAs
mm: numa: avoid unnecessary work on the failure path
mm: numa: ensure anon_vma is locked to prevent parallel THP splits
mm: numa: do not clear PTE for pte_numa update
mm: numa: do not clear PMD during PTE update scan
...
|
|
In __page_check_address(), if address's pud is not present,
huge_pte_offset() will return NULL, we should check the return value.
Signed-off-by: Jianguo Wu <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: qiuxishi <[email protected]>
Cc: Hanjun Guo <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
According to Documentation/Changes, make 3.80 is still being supported
for building the kernel, hence make files must not make (unconditional)
use of features introduced only in newer versions.
Commit 1bf49dd4be0b ("./Makefile: export initial ramdisk compression
config option") however introduced "else ifeq" constructs which make
3.80 doesn't understand. Replace the logic there with more conventional
(in the kernel build infrastructure) list constructs (except that the
list here is intentionally limited to exactly one element).
Signed-off-by: Jan Beulich <[email protected]>
Cc: P J P <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
BUG_ON(!vma) assumption is introduced by commit 0bf598d863e3 ("mbind:
add BUG_ON(!vma) in new_vma_page()"), however, even if
address = __vma_address(page, vma);
and
vma->start < address < vma->end
page_address_in_vma() may still return -EFAULT because of many other
conditions in it. As a result the while loop in new_vma_page() may end
with vma=NULL.
This patch revert the commit and also fix the potential dereference NULL
pointer reported by Dan.
http://marc.info/?l=linux-mm&m=137689530323257&w=2
kernel BUG at mm/mempolicy.c:1204!
invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC
CPU: 3 PID: 7056 Comm: trinity-child3 Not tainted 3.13.0-rc3+ #2
task: ffff8801ca5295d0 ti: ffff88005ab20000 task.ti: ffff88005ab20000
RIP: new_vma_page+0x70/0x90
RSP: 0000:ffff88005ab21db0 EFLAGS: 00010246
RAX: fffffffffffffff2 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000008040075 RSI: ffff8801c3d74600 RDI: ffffea00079a8b80
RBP: ffff88005ab21dc8 R08: 0000000000000004 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: fffffffffffffff2
R13: ffffea00079a8b80 R14: 0000000000400000 R15: 0000000000400000
FS: 00007ff49c6f4740(0000) GS:ffff880244e00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff49c68f994 CR3: 000000005a205000 CR4: 00000000001407e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Stack:
ffffea00079a8b80 ffffea00079a8bc0 ffffea00079a8ba0 ffff88005ab21e50
ffffffff811adc7a 0000000000000000 ffff8801ca5295d0 0000000464e224f8
0000000000000000 0000000000000002 0000000000000000 ffff88020ce75c00
Call Trace:
migrate_pages+0x12a/0x850
SYSC_mbind+0x513/0x6a0
SyS_mbind+0xe/0x10
ia32_do_call+0x13/0x13
Code: 85 c0 75 2f 4c 89 e1 48 89 da 31 f6 bf da 00 02 00 65 44 8b 04 25 08 f7 1c 00 e8 ec fd ff ff 5b 41 5c 41 5d 5d c3 0f 1f 44 00 00 <0f> 0b 66 0f 1f 44 00 00 4c 89 e6 48 89 df ba 01 00 00 00 e8 48
RIP [<ffffffff8119f200>] new_vma_page+0x70/0x90
RSP <ffff88005ab21db0>
Signed-off-by: Wanpeng Li <[email protected]>
Reported-by: Dave Jones <[email protected]>
Reported-by: Sasha Levin <[email protected]>
Reviewed-by: Naoya Horiguchi <[email protected]>
Reviewed-by: Bob Liu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add a new entry for the GPT standard. Any future changes will now be
routed through linux-efi.
Signed-off-by: Davidlohr Bueso <[email protected]>
Acked-by: Matt Fleming <[email protected]>
Cc: Jens Axboe <[email protected]>
Acked-by: Matt Domsch <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
After a successful hugetlb page migration by soft offline, the source
page will either be freed into hugepage_freelists or buddy(over-commit
page). If page is in buddy, page_hstate(page) will be NULL. It will
hit a NULL pointer dereference in dequeue_hwpoisoned_huge_page().
BUG: unable to handle kernel NULL pointer dereference at 0000000000000058
IP: [<ffffffff81163761>] dequeue_hwpoisoned_huge_page+0x131/0x1d0
PGD c23762067 PUD c24be2067 PMD 0
Oops: 0000 [#1] SMP
So check PageHuge(page) after call migrate_pages() successfully.
Signed-off-by: Jianguo Wu <[email protected]>
Tested-by: Naoya Horiguchi <[email protected]>
Reviewed-by: Naoya Horiguchi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
update_pageblock_skip() only fits to compaction which tries to isolate
by pageblock unit. If isolate_migratepages_range() is called by CMA, it
try to isolate regardless of pageblock unit and it don't reference
get_pageblock_skip() by ignore_skip_hint. We should also respect it on
update_pageblock_skip() to prevent from setting the wrong information.
Signed-off-by: Joonsoo Kim <[email protected]>
Acked-by: Vlastimil Babka <[email protected]>
Reviewed-by: Naoya Horiguchi <[email protected]>
Reviewed-by: Wanpeng Li <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Rafael Aquini <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Wanpeng Li <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Zhang Yanfei <[email protected]>
Cc: <[email protected]> [3.7+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
queue_pages_range() isolates hugetlbfs pages and putback_lru_pages()
can't handle these. We should change it to putback_movable_pages().
Naoya said that it is worth going into stable, because it can break
in-use hugepage list.
Signed-off-by: Joonsoo Kim <[email protected]>
Acked-by: Rafael Aquini <[email protected]>
Reviewed-by: Naoya Horiguchi <[email protected]>
Reviewed-by: Wanpeng Li <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Wanpeng Li <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: Rik van Riel <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Zhang Yanfei <[email protected]>
Cc: <[email protected]> [3.12.x]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Eliminate the following (rand)config warning by adding missing PROC_FS
dependency:
warning: (HWPOISON_INJECT && MEM_SOFT_DIRTY) selects PROC_PAGE_MONITOR which has unmet direct dependencies (PROC_FS && MMU)
Signed-off-by: Sima Baymani <[email protected]>
Suggested-by: David Rientjes <[email protected]>
Acked-by: David Rientjes <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
E.g. landisk_defconfig, which has CONFIG_NTFS_FS=m:
ERROR: "__ashrdi3" [fs/ntfs/ntfs.ko] undefined!
For "lib-y", if no symbols in a compilation unit are referenced by other
units, the compilation unit will not be included in vmlinux. This
breaks modules that do reference those symbols.
Use "obj-y" instead to fix this.
http://kisskb.ellerman.id.au/kisskb/buildresult/8838077/
This doesn't fix all cases. There are others, e.g. udivsi3.
This is also not limited to sh, many architectures handle this in the
same way.
A simple solution is to unconditionally include all helper functions.
A more complex solution is to make the choice of "lib-y" or "obj-y" depend
on CONFIG_MODULES:
obj-$(CONFIG_MODULES) += ...
lib-y($CONFIG_MODULES) += ...
Signed-off-by: Geert Uytterhoeven <[email protected]>
Cc: Paul Mundt <[email protected]>
Tested-by: Nobuhiro Iwamatsu <[email protected]>
Reviewed-by: Nobuhiro Iwamatsu <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Dave Hansen noted a regression in a microbenchmark that loops around
open() and close() on an 8-node NUMA machine and bisected it down to
commit 81c0a2bb515f ("mm: page_alloc: fair zone allocator policy").
That change forces the slab allocations of the file descriptor to spread
out to all 8 nodes, causing remote references in the page allocator and
slab.
The round-robin policy is only there to provide fairness among memory
allocations that are reclaimed involuntarily based on pressure in each
zone. It does not make sense to apply it to unreclaimable kernel
allocations that are freed manually, in this case instantly after the
allocation, and incur the remote reference costs twice for no reason.
Only round-robin allocations that are usually freed through page reclaim
or slab shrinking.
Bisected by Dave Hansen.
Signed-off-by: Johannes Weiner <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Mel Gorman <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
THP migration can fail for a variety of reasons. Avoid flushing the TLB
to deal with THP migration races until the copy is ready to start.
Signed-off-by: Mel Gorman <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Alex Thorlton <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
table updates
According to documentation on barriers, stores issued before a LOCK can
complete after the lock implying that it's possible tlb_flush_pending
can be visible after a page table update. As per revised documentation,
this patch adds a smp_mb__before_spinlock to guarantee the correct
ordering.
Signed-off-by: Mel Gorman <[email protected]>
Acked-by: Paul E. McKenney <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
There are a few subtle races, between change_protection_range (used by
mprotect and change_prot_numa) on one side, and NUMA page migration and
compaction on the other side.
The basic race is that there is a time window between when the PTE gets
made non-present (PROT_NONE or NUMA), and the TLB is flushed.
During that time, a CPU may continue writing to the page.
This is fine most of the time, however compaction or the NUMA migration
code may come in, and migrate the page away.
When that happens, the CPU may continue writing, through the cached
translation, to what is no longer the current memory location of the
process.
This only affects x86, which has a somewhat optimistic pte_accessible.
All other architectures appear to be safe, and will either always flush,
or flush whenever there is a valid mapping, even with no permissions
(SPARC).
The basic race looks like this:
CPU A CPU B CPU C
load TLB entry
make entry PTE/PMD_NUMA
fault on entry
read/write old page
start migrating page
change PTE/PMD to new page
read/write old page [*]
flush TLB
reload TLB from new entry
read/write new page
lose data
[*] the old page may belong to a new user at this point!
The obvious fix is to flush remote TLB entries, by making sure that
pte_accessible aware of the fact that PROT_NONE and PROT_NUMA memory may
still be accessible if there is a TLB flush pending for the mm.
This should fix both NUMA migration and compaction.
[[email protected]: fix build]
Signed-off-by: Rik van Riel <[email protected]>
Signed-off-by: Mel Gorman <[email protected]>
Cc: Alex Thorlton <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
do_huge_pmd_numa_page() handles the case where there is parallel THP
migration. However, by the time it is checked the NUMA hinting
information has already been disrupted. This patch adds an earlier
check with some helpers.
Signed-off-by: Mel Gorman <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Alex Thorlton <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
On a protection change it is no longer clear if the page should be still
accessible. This patch clears the NUMA hinting fault bits on a
protection change.
Signed-off-by: Mel Gorman <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Alex Thorlton <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Inaccessible VMA should not be trapping NUMA hint faults. Skip them.
Signed-off-by: Mel Gorman <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Alex Thorlton <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If a PMD changes during a THP migration then migration aborts but the
failure path is doing more work than is necessary.
Signed-off-by: Mel Gorman <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Alex Thorlton <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The anon_vma lock prevents parallel THP splits and any associated
complexity that arises when handling splits during THP migration. This
patch checks if the lock was successfully acquired and bails from THP
migration if it failed for any reason.
Signed-off-by: Mel Gorman <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Alex Thorlton <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The TLB must be flushed if the PTE is updated but change_pte_range is
clearing the PTE while marking PTEs pte_numa without necessarily
flushing the TLB if it reinserts the same entry. Without the flush,
it's conceivable that two processors have different TLBs for the same
virtual address and at the very least it would generate spurious faults.
This patch only unmaps the pages in change_pte_range for a full
protection change.
[[email protected]: write pte_numa pte back to the page tables]
Signed-off-by: Mel Gorman <[email protected]>
Signed-off-by: Rik van Riel <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Alex Thorlton <[email protected]>
Cc: Chegu Vinod <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If the PMD is flushed then a parallel fault in handle_mm_fault() will
enter the pmd_none and do_huge_pmd_anonymous_page() path where it'll
attempt to insert a huge zero page. This is wasteful so the patch
avoids clearing the PMD when setting pmd_numa.
Signed-off-by: Mel Gorman <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Alex Thorlton <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
On x86, PMD entries are similar to _PAGE_PROTNONE protection and are
handled as NUMA hinting faults. The following two page table protection
bits are what defines them
_PAGE_NUMA:set _PAGE_PRESENT:clear
A PMD is considered present if any of the _PAGE_PRESENT, _PAGE_PROTNONE,
_PAGE_PSE or _PAGE_NUMA bits are set. If pmdp_invalidate encounters a
pmd_numa, it clears the present bit leaving _PAGE_NUMA which will be
considered not present by the CPU but present by pmd_present. The
existing caller of pmdp_invalidate should handle it but it's an
inconsistent state for a PMD. This patch keeps the state consistent
when calling pmdp_invalidate.
Signed-off-by: Mel Gorman <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Alex Thorlton <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
MMU notifiers must be called on THP page migration or secondary MMUs
will get very confused.
Signed-off-by: Mel Gorman <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Alex Thorlton <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Base pages are unmapped and flushed from cache and TLB during normal
page migration and replaced with a migration entry that causes any
parallel NUMA hinting fault or gup to block until migration completes.
THP does not unmap pages due to a lack of support for migration entries
at a PMD level. This allows races with get_user_pages and
get_user_pages_fast which commit 3f926ab945b6 ("mm: Close races between
THP migration and PMD numa clearing") made worse by introducing a
pmd_clear_flush().
This patch forces get_user_page (fast and normal) on a pmd_numa page to
go through the slow get_user_page path where it will serialise against
THP migration and properly account for the NUMA hinting fault. On the
migration side the page table lock is taken for each PTE update.
Signed-off-by: Mel Gorman <[email protected]>
Reviewed-by: Rik van Riel <[email protected]>
Cc: Alex Thorlton <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit 1b3a5d02ee07 ("reboot: move arch/x86 reboot= handling to generic
kernel") moved reboot= handling to generic code. In the process it also
removed the code in native_machine_shutdown() which are moving reboot
process to reboot_cpu/cpu0.
I guess that thought must have been that all reboot paths are calling
migrate_to_reboot_cpu(), so we don't need this special handling. But
kexec reboot path (kernel_kexec()) is not calling
migrate_to_reboot_cpu() so above change broke kexec. Now reboot can
happen on non-boot cpu and when INIT is sent in second kerneo to bring
up BP, it brings down the machine.
So start calling migrate_to_reboot_cpu() in kexec reboot path to avoid
this problem.
Bisected by WANG Chao.
Reported-by: Matthew Whitehead <[email protected]>
Reported-by: Dave Young <[email protected]>
Signed-off-by: Vivek Goyal <[email protected]>
Tested-by: Baoquan He <[email protected]>
Tested-by: WANG Chao <[email protected]>
Acked-by: H. Peter Anvin <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
While testing my changes for TSO support in SIT devices,
I was using sit0 tunnel which appears to include nopmtudisc flag.
But using :
ip tun add sittun mode sit remote $REMOTE_IPV4 local $LOCAL_IPV4 \
dev $IFACE
We get a tunnel which rejects too long packets because of the mtu check
which is not yet GSO aware.
erd:~# ip tunnel
sittun: ipv6/ip remote 10.246.17.84 local 10.246.17.83 ttl inherit 6rd-prefix 2002::/16
sit0: ipv6/ip remote any local any ttl 64 nopmtudisc 6rd-prefix 2002::/16
This patch is based on an excellent report from
Michal Shmidt.
In the future, we probably want to extend the MTU check to do the
right thing for GSO packets...
Fixes: ("61c1db7fae21 ipv6: sit: add GSO/TSO support")
Reported-by: Michal Schmidt <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Tested-by: Michal Schmidt <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Sockets marked with IPV6_PMTUDISC_PROBE (or later IPV6_PMTUDISC_INTERFACE)
don't respect this setting when the outgoing interface supports UFO.
We had the same problem in IPv4, which was fixed in commit
daba287b299ec7a2c61ae3a714920e90e8396ad5 ("ipv4: fix DO and PROBE pmtu
mode regarding local fragmentation with UFO/CORK").
Also IPV6_DONTFRAG mode did not care about already corked data, thus
it may generate a fragmented frame even if this socket option was
specified. It also did not care about the length of the ipv6 header and
possible options.
In the error path allow the user to receive the pmtu notifications via
both, rxpmtu method or error queue. The user may opted in for both,
so deliver the notification to both error handlers (the handlers check
if the error needs to be enqueued).
Also report back consistent pmtu values when sending on an already
cork-appended socket.
Signed-off-by: Hannes Frederic Sowa <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Certain dm962x revisions contain an bug, where if a USB bulk transfer retry
(E.G. if bulk crc mismatch) happens right after a transfer with odd or
maxpacket length, the internal tx hardware fifo gets out of sync causing
the interface to stop working.
Work around it by adding up to 3 bytes of padding to ensure this situation
cannot trigger.
This workaround also means we never pass multiple-of-maxpacket size skb's
to usbnet, so the length adjustment to handle usbnet's padding of those can
be removed.
Cc: <[email protected]>
Reported-by: Joseph Chang <[email protected]>
Signed-off-by: Peter Korsgaard <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The driver nowadays also support dm9620/dm9621a based USB 2.0 ethernet
adapters, so adjust module/driver description and Kconfig help text to
match.
Signed-off-by: Peter Korsgaard <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
dm9620/dm9621a require room for 4 byte padding even in dm9601 (3 byte
header) mode.
Cc: <[email protected]>
Signed-off-by: Peter Korsgaard <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
dm9621a is functionally identical to dm9620, so the existing handling can
directly be used.
Thanks to Davicom for sending me a dongle.
Signed-off-by: Peter Korsgaard <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
ipgre_header_parse() needs to parse the tunnel's ip header and it
uses mac_header to locate the iphdr. This got broken when gre tunneling
was refactored as mac_header is no longer updated to point to iphdr.
Introduce skb_pop_mac_header() helper to do the mac_header assignment
and use it in ipgre_rcv() to fix msg_name parsing.
Bug introduced in commit c54419321455 (GRE: Refactor GRE tunneling code.)
Cc: Pravin B Shelar <[email protected]>
Signed-off-by: Timo Teräs <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a few USB fixes for things that have people have reported
issues with recently"
* tag 'usb-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: ohci-at91: fix irq and iomem resource retrieval
usb: phy: fix driver dependencies
phy: kconfig: add depends on "USB_PHY" to OMAP_USB2 and TWL4030_USB
drivers: phy: tweaks to phy_create()
drivers: phy: Fix memory leak
xhci: Limit the spurious wakeup fix only to HP machines
usb: chipidea: fix nobody cared IRQ when booting with host role
usb: chipidea: host: Only disable the vbus regulator if it is not NULL
usb: serial: zte_ev: move support for ZTE AC2726 from zte_ev back to option
usb: cdc-wdm: manage_power should always set needs_remote_wakeup
usb: phy-tegra-usb.c: wrong pointer check for remap UTMI
usb: phy: twl6030-usb: signedness bug in twl6030_readb()
usb: dwc3: power off usb phy in error path
usb: dwc3: invoke phy_resume after phy_init
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are a few fixes for 3.13-rc5 that resolve a number of reported
tty and serial driver issues"
* tag 'tty-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: xuartps: Properly guard sysrq specific code
n_tty: Fix apparent order of echoed output
serial: 8250_dw: add new ACPI IDs
serial: 8250_dw: Fix LCR workaround regression
tty: Fix hang at ldsem_down_read()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are a number of staging, and iio, fixes for 3.13-rc5 that resolve
some reported issues"
* tag 'staging-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
imx-drm: imx-drm-core: improve safety of imx_drm_add_crtc()
imx-drm: imx-drm-core: make imx_drm_crtc_register() safer
imx-drm: imx-drm-core: use defined constant for number of CRTCs.
imx-drm: imx-tve: don't call sleeping functions beneath enable_lock spinlock
imx-drm: ipu-v3: fix potential CRTC device registration race
imx-drm: imx-drm-core: fix DRM cleanup paths
imx-drm: imx-drm-core: fix error cleanup path for imx_drm_add_crtc()
staging: comedi: drivers: fix return value of comedi_load_firmware()
staging: comedi: 8255_pci: fix for newer PCI-DIO48H
iio:adc:ad7887 Fix channel reported endianness from cpu to big endian
iio:imu:adis16400 fix pressure channel scan type
staging:iio:mag:hmc5843 fix incorrect endianness of channel as a result of missuse of the IIO_ST macro.
iio: cm36651: Changed return value of read function
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here's a single sysfs fix for 3.13-rc5 that resolves a lockdep issue
in sysfs that has been reported"
* tag 'driver-core-3.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
sysfs: give different locking key to regular and bin files
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull crypto key patches from David Howells:
"There are four items:
- A patch to fix X.509 certificate gathering. The problem was that I
was coming up with a different path for signing_key.x509 in the
build directory if it didn't exist to if it did exist. This meant
that the X.509 cert container object file would be rebuilt on the
second rebuild in a build directory and the kernel would get
relinked.
- Unconditionally remove files generated by SYSTEM_TRUSTED_KEYRING=y
when doing make mrproper.
- Actually initialise the persistent-keyring semaphore for
init_user_ns. I have no idea why this works at all for users in
the base user namespace unless it's something to do with systemd
containerising the system.
- Documentation for module signing"
* 'keys-devel' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
Add Documentation/module-signing.txt file
KEYS: fix uninitialized persistent_keyring_register_sem
KEYS: Remove files generated when SYSTEM_TRUSTED_KEYRING=y
X.509: Fix certificate gathering
|
|
This patch adds support for enabling In Band mode in 10 mbps speed.
RGMII supports 1 Gig and 100 mbps mode for Forced mode of operation.
For 10mbps mode it should be configured to in band mode so that link
status, duplexity and speed are determined from the RGMII input data
stream
Signed-off-by: Mugunthan V N <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Ding Tianhong says:
====================
Jay Vosburgh said that the bond_3ad_adapter_speed_changed and
bond_3ad_adapter_duplex_changed is called with RTNL only, and
the functions will modify the port's information with no further
locking, they will not mutex against bond state machine and
incoming LACPDU which do not hold RTNL, So I add port lock to
protect the port information.
But they are not critical bugs, they exist since day one, and till
now they have never been hit and reported, because change for speed
and duplex is very rare, and will not occur critical problem.
The comments in the function is very old, cleanup the comments together.
====================
Signed-off-by: Jay Vosburgh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The bond_3ad_handle_link_change is called with RTNL only,
and the function will modify the port's information with
no further locking, it will not mutex against bond state
machine and incoming LACPDU which do not hold RTNL, So I
add __get_state_machine_lock to protect the port.
But it is not a critical bug, it exist since day one, and till
now it has never been hit and reported, because changes to
speed is very rare, and will not occur critical problem.
The comments in the function is very old, cleanup it and
add a new pr_debug to debug the port message.
Signed-off-by: Ding Tianhong <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Jay Vosburgh said that the bond_3ad_adapter_duplex_changed is
called with RTNL only, and the function will modify the port's
information with no further locking, it will not mutex against
bond state machine and incoming LACPDU which do not hold RTNL,
So I add __get_state_machine_lock to protect the port.
But it is not a critical bug, it exist since day one, and till
now it has never been hit and reported, because changes to
speed is very rare, and will not occur critical problem.
The comments in the function is very old, cleanup it.
Suggested-by: Jay Vosburgh <[email protected]>
Signed-off-by: Ding Tianhong <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Jay Vosburgh said that the bond_3ad_adapter_speed_changed is
called with RTNL only, and the function will modify the port's
information with no further locking, it will not mutex against
bond state machine and incoming LACPDU which do not hold RTNL,
So I add __get_state_machine_lock to protect the port.
But it is not a critical bug, it exist since day one, and till
now it has never been hit and reported, because changes to
speed is very rare, and will not occur critical problem.
The comment in the function is very old, cleanup it.
Suggested-by: Jay Vosburgh <[email protected]>
Signed-off-by: Ding Tianhong <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
net_dma can cause data to be copied to a stale mapping if a
copy-on-write fault occurs during dma. The application sees missing
data.
The following trace is triggered by modifying the kernel to WARN if it
ever triggers copy-on-write on a page that is undergoing dma:
WARNING: CPU: 24 PID: 2529 at lib/dma-debug.c:485 debug_dma_assert_idle+0xd2/0x120()
ioatdma 0000:00:04.0: DMA-API: cpu touching an active dma mapped page [pfn=0x16bcd9]
Modules linked in: iTCO_wdt iTCO_vendor_support ioatdma lpc_ich pcspkr dca
CPU: 24 PID: 2529 Comm: linbug Tainted: G W 3.13.0-rc1+ #353
00000000000001e5 ffff88016f45f688 ffffffff81751041 ffff88017ab0ef70
ffff88016f45f6d8 ffff88016f45f6c8 ffffffff8104ed9c ffffffff810f3646
ffff8801768f4840 0000000000000282 ffff88016f6cca10 00007fa2bb699349
Call Trace:
[<ffffffff81751041>] dump_stack+0x46/0x58
[<ffffffff8104ed9c>] warn_slowpath_common+0x8c/0xc0
[<ffffffff810f3646>] ? ftrace_pid_func+0x26/0x30
[<ffffffff8104ee86>] warn_slowpath_fmt+0x46/0x50
[<ffffffff8139c062>] debug_dma_assert_idle+0xd2/0x120
[<ffffffff81154a40>] do_wp_page+0xd0/0x790
[<ffffffff811582ac>] handle_mm_fault+0x51c/0xde0
[<ffffffff813830b9>] ? copy_user_enhanced_fast_string+0x9/0x20
[<ffffffff8175fc2c>] __do_page_fault+0x19c/0x530
[<ffffffff8175c196>] ? _raw_spin_lock_bh+0x16/0x40
[<ffffffff810f3539>] ? trace_clock_local+0x9/0x10
[<ffffffff810fa1f4>] ? rb_reserve_next_event+0x64/0x310
[<ffffffffa0014c00>] ? ioat2_dma_prep_memcpy_lock+0x60/0x130 [ioatdma]
[<ffffffff8175ffce>] do_page_fault+0xe/0x10
[<ffffffff8175c862>] page_fault+0x22/0x30
[<ffffffff81643991>] ? __kfree_skb+0x51/0xd0
[<ffffffff813830b9>] ? copy_user_enhanced_fast_string+0x9/0x20
[<ffffffff81388ea2>] ? memcpy_toiovec+0x52/0xa0
[<ffffffff8164770f>] skb_copy_datagram_iovec+0x5f/0x2a0
[<ffffffff8169d0f4>] tcp_rcv_established+0x674/0x7f0
[<ffffffff816a68c5>] tcp_v4_do_rcv+0x2e5/0x4a0
[..]
---[ end trace e30e3b01191b7617 ]---
Mapped at:
[<ffffffff8139c169>] debug_dma_map_page+0xb9/0x160
[<ffffffff8142bf47>] dma_async_memcpy_pg_to_pg+0x127/0x210
[<ffffffff8142cce9>] dma_memcpy_pg_to_iovec+0x119/0x1f0
[<ffffffff81669d3c>] dma_skb_copy_datagram_iovec+0x11c/0x2b0
[<ffffffff8169d1ca>] tcp_rcv_established+0x74a/0x7f0:
...the problem is that the receive path falls back to cpu-copy in
several locations and this trace is just one of the areas. A few
options were considered to fix this:
1/ sync all dma whenever a cpu copy branch is taken
2/ modify the page fault handler to hold off while dma is in-flight
Option 1 adds yet more cpu overhead to an "offload" that struggles to compete
with cpu-copy. Option 2 adds checks for behavior that is already documented as
broken when using get_user_pages(). At a minimum a debug mode is warranted to
catch and flag these violations of the dma-api vs get_user_pages().
Thanks to David for his reproducer.
Cc: <[email protected]>
Cc: Dave Jiang <[email protected]>
Cc: Vinod Koul <[email protected]>
Cc: Alexander Duyck <[email protected]>
Reported-by: David Whipple <[email protected]>
Acked-by: David S. Miller <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
the 'soc' node in the MPC5125 "tower" board .dts has an '#interrupt-cells'
property although this node is not an interrupt controller
remove this erroneously placed property because starting with v3.13-rc1
lookup and resolution of 'interrupts' specs for peripherals gets misled
(tries to use the 'soc' as the interrupt parent which fails), emits
'no irq domain found' WARN() messages and breaks the boot process
[ best viewed with 'git diff -U5' to have DT node names in the context ]
Cc: Anatolij Gustschin <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Gerhard Sittig <[email protected]>
Signed-off-by: Anatolij Gustschin <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
|
|
I see the following splat with 3.13-rc1 when attempting to perform DMA:
[ 253.004516] Alignment trap: not handling instruction e1902f9f at [<c0204b40>]
[ 253.004583] Unhandled fault: alignment exception (0x221) at 0xdfdfdfd7
[ 253.004646] Internal error: : 221 [#1] PREEMPT SMP ARM
[ 253.004691] Modules linked in: dmatest(+) [last unloaded: dmatest]
[ 253.004798] CPU: 0 PID: 671 Comm: kthreadd Not tainted 3.13.0-rc1+ #2
[ 253.004864] task: df9b0900 ti: df03e000 task.ti: df03e000
[ 253.004937] PC is at dmaengine_unmap_put+0x14/0x34
[ 253.005010] LR is at pl330_tasklet+0x3c8/0x550
[ 253.005087] pc : [<c0204b44>] lr : [<c0207478>] psr: a00e0193
[ 253.005087] sp : df03fe48 ip : 00000000 fp : df03bf18
[ 253.005178] r10: bf00e108 r9 : 00000001 r8 : 00000000
[ 253.005245] r7 : df837040 r6 : dfb41800 r5 : df837048 r4 : df837000
[ 253.005316] r3 : dfdfdfcf r2 : dfb41f80 r1 : df837048 r0 : dfdfdfd7
[ 253.005384] Flags: NzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel
[ 253.005459] Control: 30c5387d Table: 9fb9ba80 DAC: fffffffd
[ 253.005520] Process kthreadd (pid: 671, stack limit = 0xdf03e248)
This is due to desc->txd.unmap containing garbage (uninitialised memory).
Rather than add another dummy initialisation to _init_desc, instead
ensure that the descriptors are zero-initialised during allocation and
remove the dummy, per-field initialisation.
Cc: Andriy Shevchenko <[email protected]>
Acked-by: Jassi Brar <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Acked-by: Vinod Koul <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
|
|
The tty3270_alloc_screen function is called from tty3270_install with
swapped arguments, the number of columns instead of rows and vice versa.
The number of rows is typically smaller than the number of columns which
makes the screen array too big but the individual cell arrays for the
lines too small. Creating lines longer than the number of rows will
clobber the memory after the end of the cell array.
The fix is simple, call tty3270_alloc_screen with the correct argument
order.
Signed-off-by: Martin Schwidefsky <[email protected]>
|