aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-09-06wifi: mac80211: implement link switchingJohannes Berg7-0/+291
Implement an API function and debugfs file to switch active links. Also provide an async version of the API so drivers can call it in arbitrary contexts, e.g. while in the authorized callback. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: keep A-MSDU data in sta and per-linkBenjamin Berg18-65/+152
The A-MSDU data needs to be stored per-link and aggregated into a single value for the station. Add a new struct ieee_80211_sta_aggregates in order to store this data and a new function ieee80211_sta_recalc_aggregates to update the current data for the STA. Note that in the non MLO case the pointer in ieee80211_sta will directly reference the data in deflink.agg, which means that recalculation may be skipped in that case. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: set up beacon timing config on linksJohannes Berg1-36/+47
On secondary MLO links, I forgot to set the beacon interval and DTIM period, fix that. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: add vif/sta link RCU dereference macrosJohannes Berg3-5/+39
Add macros (and an exported function) to allow checking some link RCU protected accesses that are happening in callbacks from mac80211 and are thus under the correct lock. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211_hwsim: send NDP for link (de)activationJohannes Berg1-0/+28
In hwsim we now track when we receive NDP (or other frames carrying a PM bit) to see if a link should be active, but then of course we also need to transmit NDPs to at least set a link to inactive when we deacivate it. Implement that as well as sending an NDP when we activate a link, which allows receiving frames before transmitting any. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: extend ieee80211_nullfunc_get() for MLOJohannes Berg8-26/+43
Add a link_id parameter to ieee80211_nullfunc_get() to be able to obtain a correctly addressed frame. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211_hwsim: track active STA linksJohannes Berg1-0/+41
Track the powersave bit on frames where we can look up the STA by link addresses and set the links active or inactive accordingly, and use this information to TX only on links that are actually active in the peer. Note that this doesn't implement powersave fully so if no link is active things will not work right. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211_hwsim: skip inactive links on TXJohannes Berg1-0/+7
With the link activation handling in mac80211, skip any inactive links on TX. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: add ieee80211_find_sta_by_link_addrs APIJohannes Berg2-0/+53
Add a new API function ieee80211_find_sta_by_link_addrs() that looks up the STA and link ID based on interface and station link addresses. We're going to use it for mac80211-hwsim to track on the AP side which links are active. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: isolate driver from inactive linksJohannes Berg8-188/+286
In order to let the driver select active links and properly make multi-link connections, as a first step isolate the driver from inactive links, and set the active links to be only the association link for client-side interfaces. For AP side nothing changes since APs always have to have all their links active. To simplify things, update the for_each_sta_active_link() API to include the appropriate vif pointer. This also implies not allocating a chanctx for an inactive link, which requires a few more changes. Since we now no longer try to program multiple links to the driver, remove the check in the MLME code. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: make smps_mode per-linkBenjamin Berg21-44/+46
The SMPS power save mode needs to be per-link rather than being shared for all links. As such, move it into struct ieee80211_link_sta. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: use correct rx link_sta instead of defaultBenjamin Berg1-34/+35
Use rx->link_sta everywhere instead of accessing the default link. Signed-off-by: Benjamin Berg <benjamin.berg@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06wifi: mac80211: set link_sta in reorder timeoutJohannes Berg1-0/+1
Now that we have a link_sta pointer in the rx struct we also need to fill it in all the cases. It didn't matter so much until now as we weren't using it, but the code should really be able to assume that if the rx.sta is set, so is rx.link_sta. Fixes: ccdde7c74ffd ("wifi: mac80211: properly implement MLO key handling") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-06Merge remote-tracking branch 'wireless/main' into wireless-nextJohannes Berg11-26/+73
Merge wireless/main to get the rx.link fix, which is needed for further work in this area. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-04Merge tag 'wireless-next-2022-09-03' of ↵David S. Miller71-7097/+26678
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Johannes Berg says: ==================== drivers - rtw89: large update across the map, e.g. coex, pci(e), etc. - ath9k: uninit memory read fix - ath10k: small peer map fix and a WCN3990 device fix - wfx: underflow stack - the "change MAC address while IFF_UP" change from James we discussed - more MLO work, including a set of fixes for the previous code, now that we have more code we can exercise it more - prevent some features with MLO that aren't ready yet (AP_VLAN and 4-address connections) ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03wifi: mac80211_hwsim: fix multi-channel handling in netlink RXJohannes Berg1-22/+4
In netlink RX, now that we can actually have multiple channel contexts for MLO, things don't work well as we only keep a single pointer, and then on link switching we might NULL it, and hit the return if the channel is NULL. However, we already use mac80211_hwsim_tx_iter() which deals with all this, so remove the test and adjust the remaining code a bit. This then means we no longer use the chanctx pointer, so remove it as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: call drv_sta_state() under sdata_lock() in reconfigJohannes Berg1-15/+13
Currently, other paths calling drv_sta_state() hold the mutex and therefore drivers can assume that, and look at links with that protection. Fix that for the reconfig path as well; to do it more easily use ieee80211_reconfig_stations() for the AP/AP_VLAN station reconfig as well. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: nl80211: add MLD address to assoc BSS entriesJohannes Berg2-2/+6
Add an MLD address attribute to BSS entries that the interface is currently associated with to help userspace figure out what's going on. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: mlme: refactor QoS settings codeJohannes Berg2-13/+27
Refactor the code to apply QoS settings to the driver so we can call it on link switch. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: warn on invalid link addressJohannes Berg1-0/+2
Catch the bugs fixed in mac80211 by the previous commits and warn if an invalid address is added (or removed). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: fix double SW scan stopJohannes Berg1-1/+1
When we stop a not-yet-started scan, we erroneously call into the driver, causing a sequence of sw_scan_start() followed by sw_scan_complete() twice. This will cause a warning in hwsim with next in line commit that validates the address passed to wmediumd/virtio. Fix this by doing the calls only if we were actually scanning. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: mlme: assign link address correctlyJohannes Berg1-3/+2
Right now, we assign the link address only after we add the link to the driver, which is quite obviously wrong. It happens to work in many cases because it gets updated immediately, and then link_conf updates may update it, but it's clearly not really right. Set the link address during ieee80211_mgd_setup_link() so it's set before telling the driver about the link. Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: move link code to a new fileJohannes Berg4-254/+274
We probably should've done that originally, we already have about 300 lines of code there, and will add more. Move all the link code we wrote to a new file. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: refactor RX a bitJohannes Berg1-11/+15
Refactor some common RX functionality between the netlink and non-netlink paths, adding the special hwsim TLV (if compiled) also in the netlink path. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: check STA magic in change_sta_linksJohannes Berg1-0/+2
Just as an additional check that mac80211 isn't doing anything strange, add a check of the STA magic (which gets assigned when the station is added, and cleared when the station is removed). Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: remove unused arg to ieee80211_chandef_eht_operJohannes Berg3-6/+4
We don't need the sdata argument, and it doesn't make any sense for a direct conversion from one value to another, so just remove the argument Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: remove multicast workaroundJohannes Berg1-6/+1
Now that we have proper multicast TX in mac80211, there's no longer a need to fake something here. Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: nl80211: remove redundant err variableJinpeng Cui1-4/+1
Return value from rdev_set_mcast_rate() directly instead of taking this in another redundant variable. Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jinpeng Cui <cui.jinpeng2@zte.com.cn> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: Support POWERED_ADDR_CHANGE featureJames Prestwood2-2/+71
Adds support in mac80211 for NL80211_EXT_FEATURE_POWERED_ADDR_CHANGE. The motivation behind this functionality is to fix limitations of address randomization on frequencies which are disallowed in world roaming. The way things work now, if a client wants to randomize their address per-connection it must power down the device, change the MAC, and power back up. Here lies a problem since powering down the device may result in frequencies being disabled (until the regdom is set). If the desired BSS is on one such frequency the client is unable to connect once the phy is powered again. For mac80211 based devices changing the MAC while powered is possible but currently disallowed (-EBUSY). This patch adds some logic to allow a MAC change while powered by removing the interface, changing the MAC, and adding it again. mac80211 will advertise support for this feature so userspace can determine the best course of action e.g. disallow address randomization on certain frequencies if not supported. There are certain limitations put on this which simplify the logic: - No active connection - No offchannel work, including scanning. Signed-off-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: nl80211: Add POWERED_ADDR_CHANGE featureJames Prestwood1-0/+9
Add a new extended feature bit signifying that the wireless hardware supports changing the MAC address while the underlying net_device is powered. Note that this has a different meaning from IFF_LIVE_ADDR_CHANGE as additional restrictions might be imposed by the hardware, such as: - No connection is active on this interface, carrier is off - No scan is in progress - No offchannel operations are in progress Signed-off-by: James Prestwood <prestwoj@gmail.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: prevent 4-addr use on MLDsJohannes Berg2-0/+11
We haven't tried this yet, and it's not very likely to work well right now, so for now disable 4-addr use on interfaces that are MLDs. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220902161143.f2e4cc2efaa1.I5924e8fb44a2d098b676f5711b36bbc1b1bd68e2@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: prevent VLANs on MLDsJohannes Berg1-0/+5
Do not allow VLANs to be added to AP interfaces that are MLDs, this isn't going to work because the link structs aren't propagated to the VLAN interfaces yet. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Link: https://lore.kernel.org/r/20220902161144.8c88531146e9.If2ef9a3b138d4f16ed2fda91c852da156bdf5e4d@changeid Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: use struct_group to copy addressesJohannes Berg3-6/+8
We sometimes copy all the addresses from the 802.11 header for the AAD, which may cause complaints from fortify checks. Use struct_group() to avoid the compiler warnings/errors. Change-Id: Ic3ea389105e7813b22095b295079eecdabde5045 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211_hwsim: check length for virtio packetsSoenke Huster1-1/+6
An invalid packet with a length shorter than the specified length in the netlink header can lead to use-after-frees and slab-out-of-bounds in the processing of the netlink attributes, such as the following: BUG: KASAN: slab-out-of-bounds in __nla_validate_parse+0x1258/0x2010 Read of size 2 at addr ffff88800ac7952c by task kworker/0:1/12 Workqueue: events hwsim_virtio_rx_work Call Trace: <TASK> dump_stack_lvl+0x45/0x5d print_report.cold+0x5e/0x5e5 kasan_report+0xb1/0x1c0 __nla_validate_parse+0x1258/0x2010 __nla_parse+0x22/0x30 hwsim_virtio_handle_cmd.isra.0+0x13f/0x2d0 hwsim_virtio_rx_work+0x1b2/0x370 process_one_work+0x8df/0x1530 worker_thread+0x575/0x11a0 kthread+0x29d/0x340 ret_from_fork+0x22/0x30 </TASK> Discarding packets with an invalid length solves this. Therefore, skb->len must be set at reception. Change-Id: Ieaeb9a4c62d3beede274881a7c2722c6c6f477b6 Signed-off-by: Soenke Huster <soenke.huster@eknoes.de> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: fix locking in auth/assoc timeoutJohannes Berg1-6/+5
If we hit an authentication or association timeout, we only release the chanctx for the deflink, and the other link(s) are released later by ieee80211_vif_set_links(), but we're not locking this correctly. Fix the locking here while releasing the channels and links. Change-Id: I9e08c1a5434592bdc75253c1abfa6c788f9f39b1 Fixes: 81151ce462e5 ("wifi: mac80211: support MLO authentication/association with one link") Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: mlme: release deflink channel in error caseJohannes Berg1-0/+1
In the prep_channel error case we didn't release the deflink channel leaving it to be left around. Fix that. Change-Id: If0dfd748125ec46a31fc6045a480dc28e03723d2 Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03wifi: mac80211: fix link warning in RX agg timer expiryMukesh Sisodiya1-0/+4
The rx data link pointer isn't set from the RX aggregation timer, resulting in a later warning. Fix that by setting it to the first valid link for now, with a FIXME to worry about statistics later, it's not very important since it's just the timeout case. Reported-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/498d714c-76be-9d04-26db-a1206878de5e@redhat.com Fixes: 56057da4569b ("wifi: mac80211: rx: track link in RX data") Signed-off-by: Mukesh Sisodiya <mukesh.sisodiya@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2022-09-03Merge branch 'net_sched-redundant-resource-cleanups'David S. Miller2-44/+17
Zhengchao Shao says: ==================== net: sched: remove redundant resource cleanup when init() fails qdisc_create() calls .init() to initialize qdisc. If the initialization fails, qdisc_create() will call .destroy() to release resources. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03net: sched: htb: remove redundant resource cleanup in htb_init()Zhengchao Shao1-27/+9
If htb_init() fails, qdisc_create() invokes htb_destroy() to clear resources. Therefore, remove redundant resource cleanup in htb_init(). Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03net: sched: fq_codel: remove redundant resource cleanup in fq_codel_init()Zhengchao Shao1-17/+8
If fq_codel_init() fails, qdisc_create() invokes fq_codel_destroy() to clear resources. Therefore, remove redundant resource cleanup in fq_codel_init(). Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03net: fec: add stop mode support for imx8 platformWei Fang2-0/+39
The current driver support stop mode by calling machine api. The patch add dts support to set GPR register for stop request. imx8mq enter stop/exit stop mode by setting GPR bit, which can be accessed by A core. imx8qm enter stop/exit stop mode by calling IMX_SC ipc APIs that communicate with M core ipc service, and the M core set the related GPR bit at last. Signed-off-by: Wei Fang <wei.fang@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03r8152: Add MAC passthrough support for Lenovo Travel HubAndré Apitzsch1-0/+2
The Lenovo USB-C Travel Hub supports MAC passthrough. Signed-off-by: André Apitzsch <git@apitzsch.eu> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-03net/ipv4: Use __DECLARE_FLEX_ARRAY() helperGustavo A. R. Silva1-14/+6
We now have a cleaner way to keep compatibility with user-space (a.k.a. not breaking it) when we need to keep in place a one-element array (for its use in user-space) together with a flexible-array member (for its use in kernel-space) without making it hard to read at the source level. This is through the use of the new __DECLARE_FLEX_ARRAY() helper macro. The size and memory layout of the structure is preserved after the changes. See below. Before changes: $ pahole -C ip_msfilter net/ipv4/igmp.o struct ip_msfilter { union { struct { __be32 imsf_multiaddr_aux; /* 0 4 */ __be32 imsf_interface_aux; /* 4 4 */ __u32 imsf_fmode_aux; /* 8 4 */ __u32 imsf_numsrc_aux; /* 12 4 */ __be32 imsf_slist[1]; /* 16 4 */ }; /* 0 20 */ struct { __be32 imsf_multiaddr; /* 0 4 */ __be32 imsf_interface; /* 4 4 */ __u32 imsf_fmode; /* 8 4 */ __u32 imsf_numsrc; /* 12 4 */ __be32 imsf_slist_flex[0]; /* 16 0 */ }; /* 0 16 */ }; /* 0 20 */ /* size: 20, cachelines: 1, members: 1 */ /* last cacheline: 20 bytes */ }; After changes: $ pahole -C ip_msfilter net/ipv4/igmp.o struct ip_msfilter { __be32 imsf_multiaddr; /* 0 4 */ __be32 imsf_interface; /* 4 4 */ __u32 imsf_fmode; /* 8 4 */ __u32 imsf_numsrc; /* 12 4 */ union { __be32 imsf_slist[1]; /* 16 4 */ struct { struct { } __empty_imsf_slist_flex; /* 16 0 */ __be32 imsf_slist_flex[0]; /* 16 0 */ }; /* 16 0 */ }; /* 16 4 */ /* size: 20, cachelines: 1, members: 5 */ /* last cacheline: 20 bytes */ }; In the past, we had to duplicate the whole original structure within a union, and update the names of all the members. Now, we just need to declare the flexible-array member to be used in kernel-space through the __DECLARE_FLEX_ARRAY() helper together with the one-element array, within a union. This makes the source code more clean and easier to read. Link: https://github.com/KSPP/linux/issues/193 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Reviewed-by: Kees Cook <keescook@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2022-09-02net/sched: cls_api: remove redundant 0 check in tcf_qevent_init()Zhengchao Shao1-3/+0
tcf_qevent_parse_block_index() never returns a zero block_index. Therefore, it is unnecessary to check the value of block_index in tcf_qevent_init(). Signed-off-by: Zhengchao Shao <shaozhengchao@huawei.com> Link: https://lore.kernel.org/r/20220901011617.14105-1-shaozhengchao@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-02net: lantiq_etop: Fix return type for implementation of ndo_start_xmitGUO Zihua1-1/+1
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this might get cought out by CFI and cause a panic. ltq_etop_tx() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so change the return type to netdev_tx_t directly. Signed-off-by: GUO Zihua <guozihua@huawei.com> Link: https://lore.kernel.org/r/20220902081521.59867-1-guozihua@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-02net: sunplus: Fix return type for implementation of ndo_start_xmitGUO Zihua1-1/+2
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this might get cought out by CFI and cause a panic. spl2sw_ethernet_start_xmit() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so change the return type to netdev_tx_t directly. Signed-off-by: GUO Zihua <guozihua@huawei.com> Link: https://lore.kernel.org/r/20220902081550.60095-1-guozihua@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-02net: xscale: Fix return type for implementation of ndo_start_xmitGUO Zihua1-1/+1
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this might get cought out by CFI and cause a panic. eth_xmit() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so change the return type to netdev_tx_t directly. Signed-off-by: GUO Zihua <guozihua@huawei.com> Link: https://lore.kernel.org/r/20220902081612.60405-1-guozihua@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-02net: broadcom: Fix return type for implementation ofGUO Zihua1-1/+1
Since Linux now supports CFI, it will be a good idea to fix mismatched return type for implementation of hooks. Otherwise this might get cought out by CFI and cause a panic. bcm4908_enet_start_xmit() would return either NETDEV_TX_BUSY or NETDEV_TX_OK, so change the return type to netdev_tx_t directly. Signed-off-by: GUO Zihua <guozihua@huawei.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Link: https://lore.kernel.org/r/20220902075407.52358-1-guozihua@huawei.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-02net: ieee802154: Fix compilation error when ↵Gal Pressman1-4/+2
CONFIG_IEEE802154_NL802154_EXPERIMENTAL is disabled When CONFIG_IEEE802154_NL802154_EXPERIMENTAL is disabled, NL802154_CMD_DEL_SEC_LEVEL is undefined and results in a compilation error: net/ieee802154/nl802154.c:2503:19: error: 'NL802154_CMD_DEL_SEC_LEVEL' undeclared here (not in a function); did you mean 'NL802154_CMD_SET_CCA_ED_LEVEL'? 2503 | .resv_start_op = NL802154_CMD_DEL_SEC_LEVEL + 1, | ^~~~~~~~~~~~~~~~~~~~~~~~~~ | NL802154_CMD_SET_CCA_ED_LEVEL Unhide the experimental commands, having them defined in an enum makes no difference. Fixes: 9c5d03d36251 ("genetlink: start to validate reserved header bytes") Signed-off-by: Gal Pressman <gal@nvidia.com> Acked-by: Stefan Schmidt <stefan@datenfreihafen.org> Tested-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com> Link: https://lore.kernel.org/r/20220902030620.2737091-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2022-09-02net: remove netif_tx_napi_add()Jakub Kicinski1-2/+0
All callers are now gone. Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Powered by cgit, Gruvboxed by Blaster4385.