aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-04-19Don't leak MNT_INTERNAL away from internal mountsAl Viro1-1/+2
We want it only for the stuff created by SB_KERNMOUNT mounts, *not* for their copies. As it is, creating a deep stack of bindings of /proc/*/ns/* somewhere in a new namespace and exiting yields a stack overflow. Cc: [email protected] Reported-by: Alexander Aring <[email protected]> Bisected-by: Kirill Tkhai <[email protected]> Tested-by: Kirill Tkhai <[email protected]> Tested-by: Alexander Aring <[email protected]> Signed-off-by: Al Viro <[email protected]>
2018-04-19MAINTAINERS: Add backup maintainers for libnvdimm and DAXDave Jiang1-0/+15
Adding additional maintainers to libnvdimm related code and DAX. Signed-off-by: Dave Jiang <[email protected]> Acked-by: Ross Zwisler <[email protected]> Acked-by: Vishal Verma <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2018-04-19device-dax: allow MAP_SYNC to succeedDave Jiang1-0/+2
MAP_SYNC is a nop for device-dax. Allow MAP_SYNC to succeed on device-dax to eliminate special casing between device-dax and fs-dax as to when the flag can be specified. Device-dax users already implicitly assume that they do not need to call fsync(), and this enables them to explicitly check for this capability. Cc: <[email protected]> Fixes: b6fb293f2497 ("mm: Define MAP_SYNC and VM_SYNC flags") Signed-off-by: Dave Jiang <[email protected]> Reviewed-by: Dan Williams <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2018-04-19Revert "libnvdimm, of_pmem: workaround OF_NUMA=n build error"Dan Williams1-2/+1
With commit df3f126482db ("libnvdimm, of_pmem: use dev_to_node() instead of of_node_to_nid()") it is now possible to allow of_pmem to be built as a module as originally implemented. Signed-off-by: Dan Williams <[email protected]>
2018-04-19libnvdimm, of_pmem: use dev_to_node() instead of of_node_to_nid()Rob Herring1-1/+1
Remove the direct dependency on of_node_to_nid() by using dev_to_node() instead. Any DT platform device will have its NUMA node id set when the device is created. With this, commit 291717b6fbdb ("libnvdimm, of_pmem: workaround OF_NUMA=n build error") can be reverted. Fixes: 717197608952 ("libnvdimm: Add device-tree based driver") Cc: Dan Williams <[email protected]> Cc: Oliver O'Halloran <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2018-04-19net/smc: fix shutdown in state SMC_LISTENUrsula Braun1-6/+4
Calling shutdown with SHUT_RD and SHUT_RDWR for a listening SMC socket crashes, because commit 127f49705823 ("net/smc: release clcsock from tcp_listen_worker") releases the internal clcsock in smc_close_active() and sets smc->clcsock to NULL. For SHUT_RD the smc_close_active() call is removed. For SHUT_RDWR the kernel_sock_shutdown() call is omitted, since the clcsock is already released. Fixes: 127f49705823 ("net/smc: release clcsock from tcp_listen_worker") Signed-off-by: Ursula Braun <[email protected]> Reported-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19bnxt_en: Fix memory fault in bnxt_ethtool_init()Vasundhara Volam2-24/+27
In some firmware images, the length of BNX_DIR_TYPE_PKG_LOG nvram type could be greater than the fixed buffer length of 4096 bytes allocated by the driver. This was causing HWRM_NVM_READ to copy more data to the buffer than the allocated size, causing general protection fault. Fix the issue by allocating the exact buffer length returned by HWRM_NVM_FIND_DIR_ENTRY, instead of 4096. Move the kzalloc() call into the bnxt_get_pkgver() function. Fixes: 3ebf6f0a09a2 ("bnxt_en: Add installed-package firmware version reporting via Ethtool GDRVINFO") Signed-off-by: Vasundhara Volam <[email protected]> Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19Merge branch 'virtio-ctrl-buffer-fixes'David S. Miller1-29/+39
Michael S. Tsirkin says: ==================== virtio: ctrl buffer fixes Here are a couple of fixes related to the virtio control buffer. Lightly tested on x86 only. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-04-19virtio_net: sparse annotation fixMichael S. Tsirkin1-1/+1
offloads is a buffer in virtio format, should use the __virtio64 tag. Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19virtio_net: fix adding vids on big-endianMichael S. Tsirkin1-3/+3
Programming vids (adding or removing them) still passes guest-endian values in the DMA buffer. That's wrong if guest is big-endian and when virtio 1 is enabled. Note: this is on top of a previous patch: virtio_net: split out ctrl buffer Fixes: 9465a7a6f ("virtio_net: enable v1.0 support") Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19virtio_net: split out ctrl bufferMichael S. Tsirkin1-29/+39
When sending control commands, virtio net sets up several buffers for DMA. The buffers are all part of the net device which means it's actually allocated by kvmalloc so it's in theory (on extreme memory pressure) possible to get a vmalloc'ed buffer which on some platforms means we can't DMA there. Fix up by moving the DMA buffers into a separate structure. Reported-by: Mikulas Patocka <[email protected]> Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19net: hns: Avoid action name truncationdann frazier1-1/+1
When longer interface names are used, the action names exposed in /proc/interrupts and /proc/irq/* maybe truncated. For example, when using the predictable name algorithm in systemd on a HiSilicon D05, I see: ubuntu@d05-3:~$ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //' enahisic2i0-tx0 enahisic2i0-tx1 [...] enahisic2i0-tx8 enahisic2i0-tx9 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 enahisic2i0-tx1 Increase the max ring name length to allow for an interface name of IFNAMSIZE. After this change, I now see: $ grep enahisic2i0-tx /proc/interrupts | sed 's/.* //' enahisic2i0-tx0 enahisic2i0-tx1 enahisic2i0-tx2 [...] enahisic2i0-tx8 enahisic2i0-tx9 enahisic2i0-tx10 enahisic2i0-tx11 enahisic2i0-tx12 enahisic2i0-tx13 enahisic2i0-tx14 enahisic2i0-tx15 Signed-off-by: dann frazier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19docs: ip-sysctl.txt: fix name of some ipv6 variablesOlivier Gayot1-4/+4
The name of the following proc/sysctl entries were incorrectly documented: /proc/sys/net/ipv6/conf/<interface>/max_dst_opts_number /proc/sys/net/ipv6/conf/<interface>/max_hbt_opts_number /proc/sys/net/ipv6/conf/<interface>/max_dst_opts_length /proc/sys/net/ipv6/conf/<interface>/max_hbt_length Their name was set to the name of the symbol in the .data field of the control table instead of their .proc name. Signed-off-by: Olivier Gayot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19vmxnet3: fix incorrect dereference when rxvlan is disabledRonak Doshi2-6/+15
vmxnet3_get_hdr_len() is used to calculate the header length which in turn is used to calculate the gso_size for skb. When rxvlan offload is disabled, vlan tag is present in the header and the function references ip header from sizeof(ethhdr) and leads to incorrect pointer reference. This patch fixes this issue by taking sizeof(vlan_ethhdr) into account if vlan tag is present and correctly references the ip hdr. Signed-off-by: Ronak Doshi <[email protected]> Acked-by: Guolin Yang <[email protected]> Acked-by: Louis Luo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19llc: hold llc_sap before release_sock()Cong Wang1-0/+7
syzbot reported we still access llc->sap in llc_backlog_rcv() after it is freed in llc_sap_remove_socket(): Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 __asan_report_load1_noabort+0x14/0x20 mm/kasan/report.c:430 llc_conn_ac_send_sabme_cmd_p_set_x+0x3a8/0x460 net/llc/llc_c_ac.c:785 llc_exec_conn_trans_actions net/llc/llc_conn.c:475 [inline] llc_conn_service net/llc/llc_conn.c:400 [inline] llc_conn_state_process+0x4e1/0x13a0 net/llc/llc_conn.c:75 llc_backlog_rcv+0x195/0x1e0 net/llc/llc_conn.c:891 sk_backlog_rcv include/net/sock.h:909 [inline] __release_sock+0x12f/0x3a0 net/core/sock.c:2335 release_sock+0xa4/0x2b0 net/core/sock.c:2850 llc_ui_release+0xc8/0x220 net/llc/af_llc.c:204 llc->sap is refcount'ed and llc_sap_remove_socket() is paired with llc_sap_add_socket(). This can be amended by holding its refcount before llc_sap_remove_socket() and releasing it after release_sock(). Reported-by: <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19MAINTAINERS: Direct networking documentation changes to netdevJonathan Corbet1-0/+1
Networking docs changes go through the networking tree, so patch the MAINTAINERS file to direct authors to the right place. Signed-off-by: Jonathan Corbet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19atm: iphase: fix spelling mistake: "Tansmit" -> "Transmit"Colin Ian King1-2/+2
Trivial fix to spelling mistake in message text. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19net: qmi_wwan: add Wistron Neweb D19Q1Pawel Dembicki1-0/+1
This modem is embedded on dlink dwr-960 router. The oem configuration states: T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=d191 Rev=ff.ff S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=84(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none) E: Ad=86(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by: Pawel Dembicki <[email protected]> Acked-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19net: caif: fix spelling mistake "UKNOWN" -> "UNKNOWN"Colin Ian King1-1/+1
Trivial fix to spelling mistake Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19net: stmmac: Disable ACS Feature for GMAC >= 4Jose Abreu3-9/+7
ACS Feature is currently enabled for GMAC >= 4 but the llc_snap status is never checked in descriptor rx_status callback. This will cause stmmac to always strip packets even that ACS feature is already stripping them. Lets be safe and disable the ACS feature for GMAC >= 4 and always strip the packets for this GMAC version. Fixes: 477286b53f55 ("stmmac: add GMAC4 core support") Signed-off-by: Jose Abreu <[email protected]> Cc: David S. Miller <[email protected]> Cc: Joao Pinto <[email protected]> Cc: Giuseppe Cavallaro <[email protected]> Cc: Alexandre Torgue <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19net: mvpp2: Fix DMA address mask sizeMaxime Chevallier1-5/+7
PPv2 TX/RX descriptors uses 40bits DMA addresses, but 41 bits masks were used (GENMASK_ULL(40, 0)). This commit fixes that by using the correct mask. Fixes: e7c5359f2eed ("net: mvpp2: introduce PPv2.2 HW descriptors and adapt accessors") Signed-off-by: Maxime Chevallier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19net: change the comment of dev_mc_initsunlianwen1-1/+1
The comment of dev_mc_init() is wrong. which use dev_mc_flush instead of dev_mc_init. Signed-off-by: Lianwen Sun <[email protected] Signed-off-by: David S. Miller <[email protected]>
2018-04-19ALSA: rawmidi: Fix missing input substream checks in compat ioctlsTakashi Iwai1-6/+12
Some rawmidi compat ioctls lack of the input substream checks (although they do check only for rfile->output). This many eventually lead to an Oops as NULL substream is passed to the rawmidi core functions. Fix it by adding the proper checks before each function call. The bug was spotted by syzkaller. Reported-by: [email protected] Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-04-19coresight: Move to SPDX identifierMathieu Poirier9-88/+9
Move CoreSight headers to the SPDX identifier. Signed-off-by: Mathieu Poirier <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-19drm/amd/powerplay: header file interface to SMU updateKenneth Feng1-1/+3
update vega12 smu interface. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-04-19drm/amd/pp: Fix bug voltage can't be OD separately on VIRex Zhu1-6/+10
Make sure to update the MCLK and SCLK flags when setting the VDDC flags due to dependencies. Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Rex Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-04-19drm/amd/display: Don't program bypass on linear regamma LUTHarry Wentland1-7/+0
Even though this is required for degamma since DCE HW only supports a couple predefined LUTs we can just program the LUT directly for regamma. This fixes dark screens which occurs when we program regamma to bypass while degamma is using srgb LUT. Signed-off-by: Harry Wentland <[email protected]> Reviewed-by: Leo Li <[email protected]> Cc: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2018-04-19mmc: renesas_sdhi_internal_dmac: limit DMA RX for old SoCsWolfram Sang1-6/+33
Early revisions of certain SoCs cannot do multiple DMA RX streams in parallel. To avoid data corruption, only allow one DMA RX channel and fall back to PIO, if needed. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Yoshihiro Shimoda <[email protected]> Tested-by: Nguyen Viet Dung <[email protected]> Reviewed-by: Simon Horman <[email protected]> Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]>
2018-04-19clocksource/imx-tpm: Correct -ETIME return condition checkAnson Huang1-1/+1
The additional brakects added to tpm_set_next_event's return value computation causes (int) forced type conversion NOT taking effect, and the incorrect value return will cause various system timer issue, like RCU stall etc.. Remove the additional brackets to make sure tpm_set_next_event always returns correct value. Fixes: 059ab7b82eec ("clocksource/drivers/imx-tpm: Add imx tpm timer support") Signed-off-by: Anson Huang <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Dong Aisheng <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-04-19posix-cpu-timers: Ensure set_process_cpu_timer is always evaluatedLaura Abbott1-1/+3
Commit a9445e47d897 ("posix-cpu-timers: Make set_process_cpu_timer() more robust") moved the check into the 'if' statement. Unfortunately, it did so on the right side of an && which means that it may get short circuited and never evaluated. This is easily reproduced with: $ cat loop.c void main() { struct rlimit res; /* set the CPU time limit */ getrlimit(RLIMIT_CPU,&res); res.rlim_cur = 2; res.rlim_max = 2; setrlimit(RLIMIT_CPU,&res); while (1); } Which will hang forever instead of being killed. Fix this by pulling the evaluation out of the if statement but checking the return value instead. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1568337 Fixes: a9445e47d897 ("posix-cpu-timers: Make set_process_cpu_timer() more robust") Signed-off-by: Laura Abbott <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: "Max R . P . Grossmann" <[email protected]> Cc: John Stultz <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-04-19ALSA: hda/realtek - adjust the location of one micHui Wang1-0/+1
There are two front mics on this machine, if we don't adjust the location for one of them, they will have the same mixer name, pulseaudio can't handle this situation. After applying this FIXUP, they will have different mixer name, then pulseaudio can handle them correctly. Cc: <[email protected]> Signed-off-by: Hui Wang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-04-19ALSA: hda/realtek - set PINCFG_HEADSET_MIC to parse_flagsHui Wang1-0/+2
Otherwise, the pin will be regarded as microphone, and the jack name is "Mic Phantom", it is always on in the pulseaudio even nothing is plugged into the jack. So the UI is confusing to users since the microphone always shows up in the UI even there is no microphone plugged. After adding this flag, the jack name is "Headset Mic Phantom", then the pulseaudio can handle its detection correctly. Fixes: f0ba9d699e5c ("ALSA: hda/realtek - Fix Dell headset Mic can't record") Cc: <[email protected]> Signed-off-by: Hui Wang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-04-19HID: i2c-hid: fix inverted return value from i2c_hid_command()Jiri Kosina1-1/+1
i2c_hid_command() returns non-zero in error cases (the actual errno). Error handling in for I2C_HID_QUIRK_RESEND_REPORT_DESCR case in i2c_hid_resume() had the check inverted; fix that. Fixes: 3e83eda467 ("HID: i2c-hid: Fix resume issue on Raydium touchscreen device") Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2018-04-19powerpc/kvm: Fix lockups when running KVM guests on Power8Michael Ellerman1-2/+2
When running KVM guests on Power8 we can see a lockup where one CPU stops responding. This often leads to a message such as: watchdog: CPU 136 detected hard LOCKUP on other CPUs 72 Task dump for CPU 72: qemu-system-ppc R running task 10560 20917 20908 0x00040004 And then backtraces on other CPUs, such as: Task dump for CPU 48: ksmd R running task 10032 1519 2 0x00000804 Call Trace: ... --- interrupt: 901 at smp_call_function_many+0x3c8/0x460 LR = smp_call_function_many+0x37c/0x460 pmdp_invalidate+0x100/0x1b0 __split_huge_pmd+0x52c/0xdb0 try_to_unmap_one+0x764/0x8b0 rmap_walk_anon+0x15c/0x370 try_to_unmap+0xb4/0x170 split_huge_page_to_list+0x148/0xa30 try_to_merge_one_page+0xc8/0x990 try_to_merge_with_ksm_page+0x74/0xf0 ksm_scan_thread+0x10ec/0x1ac0 kthread+0x160/0x1a0 ret_from_kernel_thread+0x5c/0x78 This is caused by commit 8c1c7fb0b5ec ("powerpc/64s/idle: avoid sync for KVM state when waking from idle"), which added a check in pnv_powersave_wakeup() to see if the kvm_hstate.hwthread_state is already set to KVM_HWTHREAD_IN_KERNEL, and if so to skip the store and test of kvm_hstate.hwthread_req. The problem is that the primary does not set KVM_HWTHREAD_IN_KVM when entering the guest, so it can then come out to cede with KVM_HWTHREAD_IN_KERNEL set. It can then go idle in kvm_do_nap after setting hwthread_req to 1, but because hwthread_state is still KVM_HWTHREAD_IN_KERNEL we will skip the test of hwthread_req when we wake up from idle and won't go to kvm_start_guest. From there the thread will return somewhere garbage and crash. Fix it by skipping the store of hwthread_state, but not the test of hwthread_req, when coming out of idle. It's OK to skip the sync in that case because hwthread_req will have been set on the same thread, so there is no synchronisation required. Fixes: 8c1c7fb0b5ec ("powerpc/64s/idle: avoid sync for KVM state when waking from idle") Signed-off-by: Michael Ellerman <[email protected]>
2018-04-18cifs: smbd: Check for iov length on sending the last iovLong Li1-0/+2
When sending the last iov that breaks into smaller buffers to fit the transfer size, it's necessary to check if this is the last iov. If this is the latest iov, stop and proceed to send pages. Signed-off-by: Long Li <[email protected]> Cc: [email protected] Signed-off-by: Steve French <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]>
2018-04-19powerpc/eeh: Fix enabling bridge MMIO windowsMichael Neuling1-1/+2
On boot we save the configuration space of PCIe bridges. We do this so when we get an EEH event and everything gets reset that we can restore them. Unfortunately we save this state before we've enabled the MMIO space on the bridges. Hence if we have to reset the bridge when we come back MMIO is not enabled and we end up taking an PE freeze when the driver starts accessing again. This patch forces the memory/MMIO and bus mastering on when restoring bridges on EEH. Ideally we'd do this correctly by saving the configuration space writes later, but that will have to come later in a larger EEH rewrite. For now we have this simple fix. The original bug can be triggered on a boston machine by doing: echo 0x8000000000000000 > /sys/kernel/debug/powerpc/PCI0001/err_injct_outbound On boston, this PHB has a PCIe switch on it. Without this patch, you'll see two EEH events, 1 expected and 1 the failure we are fixing here. The second EEH event causes the anything under the PHB to disappear (i.e. the i40e eth). With this patch, only 1 EEH event occurs and devices properly recover. Fixes: 652defed4875 ("powerpc/eeh: Check PCIe link after reset") Cc: [email protected] # v3.11+ Reported-by: Pridhiviraj Paidipeddi <[email protected]> Signed-off-by: Michael Neuling <[email protected]> Acked-by: Russell Currey <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-04-18net: qualcomm: rmnet: Fix warning seen with fill_infoSubash Abhinov Kasiviswanathan1-5/+6
When the last rmnet device attached to a real device is removed, the real device is unregistered from rmnet. As a result, the real device lookup fails resulting in a warning when the fill_info handler is called as part of the rmnet device unregistration. Fix this by returning the rmnet flags as 0 when no real device is present. WARNING: CPU: 0 PID: 1779 at net/core/rtnetlink.c:3254 rtmsg_ifinfo_build_skb+0xca/0x10d Modules linked in: CPU: 0 PID: 1779 Comm: ip Not tainted 4.16.0-11872-g7ce2367 #1 Stack: 7fe655f0 60371ea3 00000000 00000000 60282bc6 6006b116 7fe65600 60371ee8 7fe65660 6003a68c 00000000 900000000 Call Trace: [<6006b116>] ? printk+0x0/0x94 [<6001f375>] show_stack+0xfe/0x158 [<60371ea3>] ? dump_stack_print_info+0xe8/0xf1 [<60282bc6>] ? rtmsg_ifinfo_build_skb+0xca/0x10d [<6006b116>] ? printk+0x0/0x94 [<60371ee8>] dump_stack+0x2a/0x2c [<6003a68c>] __warn+0x10e/0x13e [<6003a82c>] warn_slowpath_null+0x48/0x4f [<60282bc6>] rtmsg_ifinfo_build_skb+0xca/0x10d [<60282c4d>] rtmsg_ifinfo_event.part.37+0x1e/0x43 [<60282c2f>] ? rtmsg_ifinfo_event.part.37+0x0/0x43 [<60282d03>] rtmsg_ifinfo+0x24/0x28 [<60264e86>] dev_close_many+0xba/0x119 [<60282cdf>] ? rtmsg_ifinfo+0x0/0x28 [<6027c225>] ? rtnl_is_locked+0x0/0x1c [<6026ca67>] rollback_registered_many+0x1ae/0x4ae [<600314be>] ? unblock_signals+0x0/0xae [<6026cdc0>] ? unregister_netdevice_queue+0x19/0xec [<6026ceec>] unregister_netdevice_many+0x21/0xa1 [<6027c765>] rtnl_delete_link+0x3e/0x4e [<60280ecb>] rtnl_dellink+0x262/0x29c [<6027c241>] ? rtnl_get_link+0x0/0x3e [<6027f867>] rtnetlink_rcv_msg+0x235/0x274 Fixes: be81a85f5f87 ("net: qualcomm: rmnet: Implement fill_info") Signed-off-by: Subash Abhinov Kasiviswanathan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-04-19btrfs: fix unaligned access in readdirDavid Sterba1-8/+12
The last update to readdir introduced a temporary buffer to store the emitted readdir data, but as there are file names of variable length, there's a lot of unaligned access. This was observed on a sparc64 machine: Kernel unaligned access at TPC[102f3080] btrfs_real_readdir+0x51c/0x718 [btrfs] Fixes: 23b5ec74943 ("btrfs: fix readdir deadlock with pagefault") CC: [email protected] # 4.14+ Reported-and-tested-by: René Rebe <[email protected]> Reviewed-by: Liu Bo <[email protected]> Signed-off-by: David Sterba <[email protected]>
2018-04-18MIPS: uaccess: Add micromips clobbers to bzero invocationMatt Redfearn1-2/+9
The micromips implementation of bzero additionally clobbers registers t7 & t8. Specify this in the clobbers list when invoking bzero. Fixes: 26c5e07d1478 ("MIPS: microMIPS: Optimise 'memset' core library function.") Reported-by: James Hogan <[email protected]> Signed-off-by: Matt Redfearn <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: [email protected] Cc: <[email protected]> # 3.10+ Patchwork: https://patchwork.linux-mips.org/patch/19110/ Signed-off-by: James Hogan <[email protected]>
2018-04-18MIPS: memset.S: Fix clobber of v1 in last_fixupMatt Redfearn1-1/+1
The label .Llast_fixup\@ is jumped to on page fault within the final byte set loop of memset (on < MIPSR6 architectures). For some reason, in this fault handler, the v1 register is randomly set to a2 & STORMASK. This clobbers v1 for the calling function. This can be observed with the following test code: static int __init __attribute__((optimize("O0"))) test_clear_user(void) { register int t asm("v1"); char *test; int j, k; pr_info("\n\n\nTesting clear_user\n"); test = vmalloc(PAGE_SIZE); for (j = 256; j < 512; j++) { t = 0xa5a5a5a5; if ((k = clear_user(test + PAGE_SIZE - 256, j)) != j - 256) { pr_err("clear_user (%px %d) returned %d\n", test + PAGE_SIZE - 256, j, k); } if (t != 0xa5a5a5a5) { pr_err("v1 was clobbered to 0x%x!\n", t); } } return 0; } late_initcall(test_clear_user); Which demonstrates that v1 is indeed clobbered (MIPS64): Testing clear_user v1 was clobbered to 0x1! v1 was clobbered to 0x2! v1 was clobbered to 0x3! v1 was clobbered to 0x4! v1 was clobbered to 0x5! v1 was clobbered to 0x6! v1 was clobbered to 0x7! Since the number of bytes that could not be set is already contained in a2, the andi placing a value in v1 is not necessary and actively harmful in clobbering v1. Reported-by: James Hogan <[email protected]> Signed-off-by: Matt Redfearn <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/19109/ Signed-off-by: James Hogan <[email protected]>
2018-04-18Merge tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-clientLinus Torvalds2-35/+76
Pull ceph fixes from Ilya Dryomov: "A couple of follow-up patches for -rc1 changes in rbd, support for a timeout on waiting for the acquisition of exclusive lock and a fix for uninitialized memory access in CephFS, marked for stable" * tag 'ceph-for-4.17-rc2' of git://github.com/ceph/ceph-client: rbd: notrim map option rbd: adjust queue limits for "fancy" striping rbd: avoid Wreturn-type warnings ceph: always update atime/mtime/ctime for new inode rbd: support timeout in rbd_wait_state_locked() rbd: refactor rbd_wait_state_locked()
2018-04-18perf test BPF: Fixup BPF test using epoll_pwait syscall function probeArnaldo Carvalho de Melo1-1/+1
Since e145242ea0df ("syscalls/core, syscalls/x86: Clean up syscall stub naming convention") changed the main syscall function for 'epoll_pwait' to something other than the expected 'SyS_epoll_pwait the' 'perf test BPF' entries started failing, fix it by using something called from the main syscall function instead, 'epoll_wait', which should keep this test working in older kernels too. Before: # perf test BPF 40: BPF filter : 40.1: Basic BPF filtering : FAILED! 40.2: BPF pinning : Skip 40.3: BPF prologue generation : Skip 40.4: BPF relocation checker : Skip If we use -v for that test we see the problem: Probe point 'SyS_epoll_pwait' not found. After: # perf test BPF 40: BPF filter : 40.1: Basic BPF filtering : Ok 40.2: BPF pinning : Ok 40.3: BPF prologue generation : Ok 40.4: BPF relocation checker : Ok # Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Dominik Brodowski <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf tests mmap: Show which tracepoint is failingArnaldo Carvalho de Melo1-1/+1
In the 'perf test "mmap interface"' we try creating events for several tracepoints, but when perf_evsel__new() fails we're not showing which one is failing, fix that to help diagnosing problems, such as the syscall tracepoints ones being found and fixes in this merge window. Now the failing tests shows: # perf test -v "mmap interface" 4: Read samples using the mmap interface : --- start --- test child forked, pid 14311 <SNIP> perf_evsel__new(sys_enter_getppid) test child finished with -1 ---- end ---- Read samples using the mmap interface: FAILED! # Now to check why the syscalls:sys_enter_getppid is failing... # ls -la /sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid ls: cannot access '/sys/kernel/debug/tracing/events/syscalls/sys_enter_getppid': No such file or directory # Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Dominik Brodowski <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf tools: Add '\n' at the end of parse-options error messagesRavi Bangoria1-3/+3
Few error messages does not have '\n' at the end and thus next prompt gets printed in the same line. Ex, linux~$ perf buildid-cache -verbose --add ./a.out Error: did you mean `--verbose` (with two dashes ?)linux~$ Fix it. Signed-off-by: Ravi Bangoria <[email protected]> Reviewed-by: Masami Hiramatsu <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kate Stewart <[email protected]> Cc: Krister Johansen <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Philippe Ombredanne <[email protected]> Cc: Sihyeon Jang <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf record: Remove suggestion to enable APICAndi Kleen1-2/+1
'perf record' suggests to enable the APIC on errors. APIC is practically always used today and the problem is usually somewhere else. Just remove the outdated suggestion. Signed-off-by: Andi Kleen <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf record: Remove misleading error suggestionAndi Kleen1-2/+1
When perf record encounters an error setting up an event it suggests to enable CONFIG_PERF_EVENTS. This is misleading because: - Usually it is enabled (it is really hard to disable on x86) - The problem is usually somewhere else, e.g. the CPU is not supported or an invalid configuration has been used. Remove the misleading suggestion. Signed-off-by: Andi Kleen <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf hists browser: Clarify top/report browser helpAndi Kleen1-1/+1
Clarify in the browser help that ESC in tui mode may go back to the previous screen instead of just exiting (was not clear to me) Signed-off-by: Andi Kleen <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf mem: Allow all record/report optionsAndi Kleen2-2/+5
For perf mem report / perf mem record, pass all unknown options through to the underlying report/record commands. This makes things like perf mem record -a sleep 1 work. Matches how c2c and other tools work. Signed-off-by: Andi Kleen <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18perf trace: Support MAP_FIXED_NOREPLACEArnaldo Carvalho de Melo1-0/+3
Introduced in a4ff8e8620d3 ("mm: introduce MAP_FIXED_NOREPLACE"), and now that we have that define in the just syncronized tools/arch/*/include/uapi/asm/mman.h files, add support for it. This should really transition to autogeneration of string tables as done for various other things: $ ls /tmp/build/perf/trace/beauty/generated/*.c arch_errno_name_array.c kcmp_type_array.c madvise_behavior_array.c pkey_alloc_access_rights_array.c prctl_option_array.c $ head /tmp/build/perf/trace/beauty/generated/madvise_behavior_array.c static const char *madvise_advices[] = { [0] = "NORMAL", [1] = "RANDOM", [2] = "SEQUENTIAL", [3] = "WILLNEED", [4] = "DONTNEED", [8] = "FREE", [9] = "REMOVE", [10] = "DONTFORK", [11] = "DOFORK", $ Till then, add support for this the old way. Also it has to be ifdef'ed, because arches like mips still don't define it. The proper solution will be to have per-arch tables for these values to support cross-analysis. Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signef-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-04-18tun: fix vlan packet truncationBjørn Mork1-6/+1
Bogus trimming in tun_net_xmit() causes truncated vlan packets. skb->len is correct whether or not skb_vlan_tag_present() is true. There is no more reason to adjust the skb length on xmit in this driver than any other driver. tun_put_user() adds 4 bytes to the total for tagged packets because it transmits the tag inline to userspace. This is similar to a nic transmitting the tag inline on the wire. Reproducing the bug by sending any tagged packet through back-to-back connected tap interfaces: socat TUN,tun-type=tap,iff-up,tun-name=in TUN,tun-type=tap,iff-up,tun-name=out & ip link add link in name in.20 type vlan id 20 ip addr add 10.9.9.9/24 dev in.20 ip link set in.20 up tshark -nxxi in -f arp -c1 2>/dev/null & tshark -nxxi out -f arp -c1 2>/dev/null & ping -c 1 10.9.9.5 >/dev/null 2>&1 The output from the 'in' and 'out' interfaces are different when the bug is present: Capturing on 'in' 0000 ff ff ff ff ff ff 76 cf 76 37 d5 0a 81 00 00 14 ......v.v7...... 0010 08 06 00 01 08 00 06 04 00 01 76 cf 76 37 d5 0a ..........v.v7.. 0020 0a 09 09 09 00 00 00 00 00 00 0a 09 09 05 .............. Capturing on 'out' 0000 ff ff ff ff ff ff 76 cf 76 37 d5 0a 81 00 00 14 ......v.v7...... 0010 08 06 00 01 08 00 06 04 00 01 76 cf 76 37 d5 0a ..........v.v7.. 0020 0a 09 09 09 00 00 00 00 00 00 .......... Fixes: aff3d70a07ff ("tun: allow to attach ebpf socket filter") Cc: Jason Wang <[email protected]> Signed-off-by: Bjørn Mork <[email protected]> Acked-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.