aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-09-12Merge tag 'nf-24-09-12' of ↵Paolo Abeni1-6/+42
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following batch contains two fixes from Florian Westphal: Patch #1 fixes a sk refcount leak in nft_socket on mismatch. Patch #2 fixes cgroupsv2 matching from containers due to incorrect level in subtree. netfilter pull request 24-09-12 * tag 'nf-24-09-12' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nft_socket: make cgroupsv2 matching work with namespaces netfilter: nft_socket: fix sk refcount leaks ==================== Link: https://patch.msgid.link/20240911222520.3606-1-pablo@netfilter.org Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-09-12PCI: Fix potential deadlock in pcim_intx()Philipp Stanner1-0/+2
25216afc9db5 ("PCI: Add managed pcim_intx()") moved the allocation step for pci_intx()'s device resource from pcim_enable_device() to pcim_intx(). As before, pcim_enable_device() sets pci_dev.is_managed to true; and it is never set to false again. Due to the lifecycle of a struct pci_dev, it can happen that a second driver obtains the same pci_dev after a first driver ran. If one driver uses pcim_enable_device() and the other doesn't, this causes the other driver to run into managed pcim_intx(), which will try to allocate when called for the first time. Allocations might sleep, so calling pci_intx() while holding spinlocks becomes then invalid, which causes lockdep warnings and could cause deadlocks: ======================================================== WARNING: possible irq lock inversion dependency detected 6.11.0-rc6+ #59 Tainted: G W -------------------------------------------------------- CPU 0/KVM/1537 just changed the state of lock: ffffa0f0cff965f0 (&vdev->irqlock){-...}-{2:2}, at: vfio_intx_handler+0x21/0xd0 [vfio_pci_core] but this lock took another, HARDIRQ-unsafe lock in the past: (fs_reclaim){+.+.}-{0:0} and interrupts could create inverse lock ordering between them. other info that might help us debug this: Possible interrupt unsafe locking scenario: CPU0 CPU1 ---- ---- lock(fs_reclaim); local_irq_disable(); lock(&vdev->irqlock); lock(fs_reclaim); <Interrupt> lock(&vdev->irqlock); *** DEADLOCK *** Have pcim_enable_device()'s release function, pcim_disable_device(), set pci_dev.is_managed to false so that subsequent drivers using the same struct pci_dev do not implicitly run into managed code. Link: https://lore.kernel.org/r/20240905072556.11375-2-pstanner@redhat.com Fixes: 25216afc9db5 ("PCI: Add managed pcim_intx()") Reported-by: Alex Williamson <alex.williamson@redhat.com> Closes: https://lore.kernel.org/all/20240903094431.63551744.alex.williamson@redhat.com/ Suggested-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Philipp Stanner <pstanner@redhat.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Tested-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
2024-09-11workqueue: Clear worker->pool in the worker thread contextLai Jiangshan1-2/+6
Marc Hartmayer reported: [ 23.133876] Unable to handle kernel pointer dereference in virtual kernel address space [ 23.133950] Failing address: 0000000000000000 TEID: 0000000000000483 [ 23.133954] Fault in home space mode while using kernel ASCE. [ 23.133957] AS:000000001b8f0007 R3:0000000056cf4007 S:0000000056cf3800 P:000000000000003d [ 23.134207] Oops: 0004 ilc:2 [#1] SMP (snip) [ 23.134516] Call Trace: [ 23.134520] [<0000024e326caf28>] worker_thread+0x48/0x430 [ 23.134525] ([<0000024e326caf18>] worker_thread+0x38/0x430) [ 23.134528] [<0000024e326d3a3e>] kthread+0x11e/0x130 [ 23.134533] [<0000024e3264b0dc>] __ret_from_fork+0x3c/0x60 [ 23.134536] [<0000024e333fb37a>] ret_from_fork+0xa/0x38 [ 23.134552] Last Breaking-Event-Address: [ 23.134553] [<0000024e333f4c04>] mutex_unlock+0x24/0x30 [ 23.134562] Kernel panic - not syncing: Fatal exception: panic_on_oops With debuging and analysis, worker_thread() accesses to the nullified worker->pool when the newly created worker is destroyed before being waken-up, in which case worker_thread() can see the result detach_worker() reseting worker->pool to NULL at the begining. Move the code "worker->pool = NULL;" out from detach_worker() to fix the problem. worker->pool had been designed to be constant for regular workers and changeable for rescuer. To share attaching/detaching code for regular and rescuer workers and to avoid worker->pool being accessed inadvertently when the worker has been detached, worker->pool is reset to NULL when detached no matter the worker is rescuer or not. To maintain worker->pool being reset after detached, move the code "worker->pool = NULL;" in the worker thread context after detached. It is either be in the regular worker thread context after PF_WQ_WORKER is cleared or in rescuer worker thread context with wq_pool_attach_mutex held. So it is safe to do so. Cc: Marc Hartmayer <mhartmay@linux.ibm.com> Link: https://lore.kernel.org/lkml/87wmjj971b.fsf@linux.ibm.com/ Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Fixes: f4b7b53c94af ("workqueue: Detach workers directly in idle_cull_fn()") Cc: stable@vger.kernel.org # v6.11+ Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2024-09-11net: tighten bad gso csum offset check in virtio_net_hdrWillem de Bruijn1-1/+2
The referenced commit drops bad input, but has false positives. Tighten the check to avoid these. The check detects illegal checksum offload requests, which produce csum_start/csum_off beyond end of packet after segmentation. But it is based on two incorrect assumptions: 1. virtio_net_hdr_to_skb with VIRTIO_NET_HDR_GSO_TCP[46] implies GSO. True in callers that inject into the tx path, such as tap. But false in callers that inject into rx, like virtio-net. Here, the flags indicate GRO, and CHECKSUM_UNNECESSARY or CHECKSUM_NONE without VIRTIO_NET_HDR_F_NEEDS_CSUM is normal. 2. TSO requires checksum offload, i.e., ip_summed == CHECKSUM_PARTIAL. False, as tcp[46]_gso_segment will fix up csum_start and offset for all other ip_summed by calling __tcp_v4_send_check. Because of 2, we can limit the scope of the fix to virtio_net_hdr that do try to set these fields, with a bogus value. Link: https://lore.kernel.org/netdev/20240909094527.GA3048202@port70.net/ Fixes: 89add40066f9 ("net: drop bad gso csum_start and offset in virtio_net_hdr") Signed-off-by: Willem de Bruijn <willemb@google.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Cc: stable@vger.kernel.org Link: https://patch.msgid.link/20240910213553.839926-1-willemdebruijn.kernel@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11netlink: specs: mptcp: fix port endiannessAsbjørn Sloth Tønnesen1-1/+0
The MPTCP port attribute is in host endianness, but was documented as big-endian in the ynl specification. Below are two examples from net/mptcp/pm_netlink.c showing that the attribute is converted to/from host endianness for use with netlink. Import from netlink: addr->port = htons(nla_get_u16(tb[MPTCP_PM_ADDR_ATTR_PORT])) Export to netlink: nla_put_u16(skb, MPTCP_PM_ADDR_ATTR_PORT, ntohs(addr->port)) Where addr->port is defined as __be16. No functional change intended. Fixes: bc8aeb2045e2 ("Documentation: netlink: add a YAML spec for mptcp") Signed-off-by: Asbjørn Sloth Tønnesen <ast@fiberby.net> Reviewed-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240911091003.1112179-1-ast@fiberby.net Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: dpaa: Pad packets to ETH_ZLENSean Anderson1-1/+8
When sending packets under 60 bytes, up to three bytes of the buffer following the data may be leaked. Avoid this by extending all packets to ETH_ZLEN, ensuring nothing is leaked in the padding. This bug can be reproduced by running $ ping -s 11 destination Fixes: 9ad1a3749333 ("dpaa_eth: add support for DPAA Ethernet") Suggested-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20240910143144.1439910-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11mptcp: pm: Fix uaf in __timer_delete_syncEdward Adam Davis1-4/+9
There are two paths to access mptcp_pm_del_add_timer, result in a race condition: CPU1 CPU2 ==== ==== net_rx_action napi_poll netlink_sendmsg __napi_poll netlink_unicast process_backlog netlink_unicast_kernel __netif_receive_skb genl_rcv __netif_receive_skb_one_core netlink_rcv_skb NF_HOOK genl_rcv_msg ip_local_deliver_finish genl_family_rcv_msg ip_protocol_deliver_rcu genl_family_rcv_msg_doit tcp_v4_rcv mptcp_pm_nl_flush_addrs_doit tcp_v4_do_rcv mptcp_nl_remove_addrs_list tcp_rcv_established mptcp_pm_remove_addrs_and_subflows tcp_data_queue remove_anno_list_by_saddr mptcp_incoming_options mptcp_pm_del_add_timer mptcp_pm_del_add_timer kfree(entry) In remove_anno_list_by_saddr(running on CPU2), after leaving the critical zone protected by "pm.lock", the entry will be released, which leads to the occurrence of uaf in the mptcp_pm_del_add_timer(running on CPU1). Keeping a reference to add_timer inside the lock, and calling sk_stop_timer_sync() with this reference, instead of "entry->add_timer". Move list_del(&entry->list) to mptcp_pm_del_add_timer and inside the pm lock, do not directly access any members of the entry outside the pm lock, which can avoid similar "entry->x" uaf. Fixes: 00cfd77b9063 ("mptcp: retransmit ADD_ADDR when timeout") Cc: stable@vger.kernel.org Reported-and-tested-by: syzbot+f3a31fb909db9b2a5c4d@syzkaller.appspotmail.com Closes: https://syzkaller.appspot.com/bug?extid=f3a31fb909db9b2a5c4d Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by: Edward Adam Davis <eadavis@qq.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Link: https://patch.msgid.link/tencent_7142963A37944B4A74EF76CD66EA3C253609@qq.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: libwx: fix number of Rx and Tx descriptorsJiawen Wu1-3/+3
The number of transmit and receive descriptors must be a multiple of 128 due to the hardware limitation. If it is set to a multiple of 8 instead of a multiple 128, the queues will easily be hung. Cc: stable@vger.kernel.org Fixes: 883b5984a5d2 ("net: wangxun: add ethtool_ops for ring parameters") Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240910095629.570674-1-jiawenwu@trustnetic.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: dsa: felix: ignore pending status of TAS module when it's disabledXiaoliang Yang1-4/+7
The TAS module could not be configured when it's running in pending status. We need disable the module and configure it again. However, the pending status is not cleared after the module disabled. TC taprio set will always return busy even it's disabled. For example, a user uses tc-taprio to configure Qbv and a future basetime. The TAS module will run in a pending status. There is no way to reconfigure Qbv, it always returns busy. Actually the TAS module can be reconfigured when it's disabled. So it doesn't need to check the pending status if the TAS module is disabled. After the patch, user can delete the tc taprio configuration to disable Qbv and reconfigure it again. Fixes: de143c0e274b ("net: dsa: felix: Configure Time-Aware Scheduler via taprio offload") Signed-off-by: Xiaoliang Yang <xiaoliang.yang_1@nxp.com> Link: https://patch.msgid.link/20240906093550.29985-1-xiaoliang.yang_1@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11net: hsr: prevent NULL pointer dereference in hsr_proxy_announce()Jeongjun Park1-0/+4
In the function hsr_proxy_annouance() added in the previous commit 5f703ce5c981 ("net: hsr: Send supervisory frames to HSR network with ProxyNodeTable data"), the return value of the hsr_port_get_hsr() function is not checked to be a NULL pointer, which causes a NULL pointer dereference. To solve this, we need to add code to check whether the return value of hsr_port_get_hsr() is NULL. Reported-by: syzbot+02a42d9b1bd395cbcab4@syzkaller.appspotmail.com Fixes: 5f703ce5c981 ("net: hsr: Send supervisory frames to HSR network with ProxyNodeTable data") Signed-off-by: Jeongjun Park <aha310510@gmail.com> Reviewed-by: Simon Horman <horms@kernel.org> Acked-by: Lukasz Majewski <lukma@denx.de> Link: https://patch.msgid.link/20240907190341.162289-1-aha310510@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11Merge branch 'selftests-mptcp-misc-small-fixes'Jakub Kicinski2-1/+5
Matthieu Baerts says: ==================== selftests: mptcp: misc. small fixes Here are some various fixes for the MPTCP selftests. Patch 1 fixes a recently modified test to continue to work as expected on older kernels. This is a fix for a recent fix that can be backported up to v5.15. Patch 2 and 3 include dependences when exporting or installing the tests. Two fixes for v6.11-rc1. ==================== Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-0-8f124aa9156d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11selftests: mptcp: include net_helper.sh fileMatthieu Baerts (NGI0)1-1/+1
Similar to the previous commit, the net_helper.sh file from the parent directory is used by the MPTCP selftests and it needs to be present when running the tests. This file then needs to be listed in the Makefile to be included when exporting or installing the tests, e.g. with: make -C tools/testing/selftests \ TARGETS=net/mptcp \ install INSTALL_PATH=$KSFT_INSTALL_PATH cd $KSFT_INSTALL_PATH ./run_kselftest.sh -c net/mptcp Fixes: 1af3bc912eac ("selftests: mptcp: lib: use wait_local_port_listen helper") Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-3-8f124aa9156d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11selftests: mptcp: include lib.sh fileMatthieu Baerts (NGI0)1-0/+2
The lib.sh file from the parent directory is used by the MPTCP selftests and it needs to be present when running the tests. This file then needs to be listed in the Makefile to be included when exporting or installing the tests, e.g. with: make -C tools/testing/selftests \ TARGETS=net/mptcp \ install INSTALL_PATH=$KSFT_INSTALL_PATH cd $KSFT_INSTALL_PATH ./run_kselftest.sh -c net/mptcp Fixes: f265d3119a29 ("selftests: mptcp: lib: use setup/cleanup_ns helpers") Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-2-8f124aa9156d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-11selftests: mptcp: join: restrict fullmesh endp on 1st sfMatthieu Baerts (NGI0)1-1/+3
A new endpoint using the IP of the initial subflow has been recently added to increase the code coverage. But it breaks the test when using old kernels not having commit 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk"), e.g. on v5.15. Similar to commit d4c81bbb8600 ("selftests: mptcp: join: support local endpoint being tracked or not"), it is possible to add the new endpoint conditionally, by checking if "mptcp_pm_subflow_check_next" is present in kallsyms: this is not directly linked to the commit introducing this symbol but for the parent one which is linked anyway. So we can know in advance what will be the expected behaviour, and add the new endpoint only when it makes sense to do so. Fixes: 4878f9f8421f ("selftests: mptcp: join: validate fullmesh endp on 1st sf") Cc: stable@vger.kernel.org Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org> Link: https://patch.msgid.link/20240910-net-selftests-mptcp-fix-install-v1-1-8f124aa9156d@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-12netfilter: nft_socket: make cgroupsv2 matching work with namespacesFlorian Westphal1-3/+38
When running in container environmment, /sys/fs/cgroup/ might not be the real root node of the sk-attached cgroup. Example: In container: % stat /sys//fs/cgroup/ Device: 0,21 Inode: 2214 .. % stat /sys/fs/cgroup/foo Device: 0,21 Inode: 2264 .. The expectation would be for: nft add rule .. socket cgroupv2 level 1 "foo" counter to match traffic from a process that got added to "foo" via "echo $pid > /sys/fs/cgroup/foo/cgroup.procs". However, 'level 3' is needed to make this work. Seen from initial namespace, the complete hierarchy is: % stat /sys/fs/cgroup/system.slice/docker-.../foo Device: 0,21 Inode: 2264 .. i.e. hierarchy is 0 1 2 3 / -> system.slice -> docker-1... -> foo ... but the container doesn't know that its "/" is the "docker-1.." cgroup. Current code will retrieve the 'system.slice' cgroup node and store its kn->id in the destination register, so compare with 2264 ("foo" cgroup id) will not match. Fetch "/" cgroup from ->init() and add its level to the level we try to extract. cgroup root-level is 0 for the init-namespace or the level of the ancestor that is exposed as the cgroup root inside the container. In the above case, cgrp->level of "/" resolved in the container is 2 (docker-1...scope/) and request for 'level 1' will get adjusted to fetch the actual level (3). v2: use CONFIG_SOCK_CGROUP_DATA, eval function depends on it. (kernel test robot) Cc: cgroups@vger.kernel.org Fixes: e0bb96db96f8 ("netfilter: nft_socket: add support for cgroupsv2") Reported-by: Nadia Pinaeva <n.m.pinaeva@gmail.com> Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-09-12netfilter: nft_socket: fix sk refcount leaksFlorian Westphal1-3/+4
We must put 'sk' reference before returning. Fixes: 039b1f4f24ec ("netfilter: nft_socket: fix erroneous socket assignment") Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-09-11blk_iocost: make read-only static array vrate_adj_pct constColin Ian King1-1/+1
The static array vrate_adj_pct is read-only, so make it const as well. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20240911214124.197403-1-colin.i.king@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-11spi: nxp-fspi: fix the KASAN report out-of-bounds bugHan Xu1-2/+3
Change the memcpy length to fix the out-of-bounds issue when writing the data that is not 4 byte aligned to TX FIFO. To reproduce the issue, write 3 bytes data to NOR chip. dd if=3b of=/dev/mtd0 [ 36.926103] ================================================================== [ 36.933409] BUG: KASAN: slab-out-of-bounds in nxp_fspi_exec_op+0x26ec/0x2838 [ 36.940514] Read of size 4 at addr ffff00081037c2a0 by task dd/455 [ 36.946721] [ 36.948235] CPU: 3 UID: 0 PID: 455 Comm: dd Not tainted 6.11.0-rc5-gc7b0e37c8434 #1070 [ 36.956185] Hardware name: Freescale i.MX8QM MEK (DT) [ 36.961260] Call trace: [ 36.963723] dump_backtrace+0x90/0xe8 [ 36.967414] show_stack+0x18/0x24 [ 36.970749] dump_stack_lvl+0x78/0x90 [ 36.974451] print_report+0x114/0x5cc [ 36.978151] kasan_report+0xa4/0xf0 [ 36.981670] __asan_report_load_n_noabort+0x1c/0x28 [ 36.986587] nxp_fspi_exec_op+0x26ec/0x2838 [ 36.990800] spi_mem_exec_op+0x8ec/0xd30 [ 36.994762] spi_mem_no_dirmap_read+0x190/0x1e0 [ 36.999323] spi_mem_dirmap_write+0x238/0x32c [ 37.003710] spi_nor_write_data+0x220/0x374 [ 37.007932] spi_nor_write+0x110/0x2e8 [ 37.011711] mtd_write_oob_std+0x154/0x1f0 [ 37.015838] mtd_write_oob+0x104/0x1d0 [ 37.019617] mtd_write+0xb8/0x12c [ 37.022953] mtdchar_write+0x224/0x47c [ 37.026732] vfs_write+0x1e4/0x8c8 [ 37.030163] ksys_write+0xec/0x1d0 [ 37.033586] __arm64_sys_write+0x6c/0x9c [ 37.037539] invoke_syscall+0x6c/0x258 [ 37.041327] el0_svc_common.constprop.0+0x160/0x22c [ 37.046244] do_el0_svc+0x44/0x5c [ 37.049589] el0_svc+0x38/0x78 [ 37.052681] el0t_64_sync_handler+0x13c/0x158 [ 37.057077] el0t_64_sync+0x190/0x194 [ 37.060775] [ 37.062274] Allocated by task 455: [ 37.065701] kasan_save_stack+0x2c/0x54 [ 37.069570] kasan_save_track+0x20/0x3c [ 37.073438] kasan_save_alloc_info+0x40/0x54 [ 37.077736] __kasan_kmalloc+0xa0/0xb8 [ 37.081515] __kmalloc_noprof+0x158/0x2f8 [ 37.085563] mtd_kmalloc_up_to+0x120/0x154 [ 37.089690] mtdchar_write+0x130/0x47c [ 37.093469] vfs_write+0x1e4/0x8c8 [ 37.096901] ksys_write+0xec/0x1d0 [ 37.100332] __arm64_sys_write+0x6c/0x9c [ 37.104287] invoke_syscall+0x6c/0x258 [ 37.108064] el0_svc_common.constprop.0+0x160/0x22c [ 37.112972] do_el0_svc+0x44/0x5c [ 37.116319] el0_svc+0x38/0x78 [ 37.119401] el0t_64_sync_handler+0x13c/0x158 [ 37.123788] el0t_64_sync+0x190/0x194 [ 37.127474] [ 37.128977] The buggy address belongs to the object at ffff00081037c2a0 [ 37.128977] which belongs to the cache kmalloc-8 of size 8 [ 37.141177] The buggy address is located 0 bytes inside of [ 37.141177] allocated 3-byte region [ffff00081037c2a0, ffff00081037c2a3) [ 37.153465] [ 37.154971] The buggy address belongs to the physical page: [ 37.160559] page: refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x89037c [ 37.168596] flags: 0xbfffe0000000000(node=0|zone=2|lastcpupid=0x1ffff) [ 37.175149] page_type: 0xfdffffff(slab) [ 37.179021] raw: 0bfffe0000000000 ffff000800002500 dead000000000122 0000000000000000 [ 37.186788] raw: 0000000000000000 0000000080800080 00000001fdffffff 0000000000000000 [ 37.194553] page dumped because: kasan: bad access detected [ 37.200144] [ 37.201647] Memory state around the buggy address: [ 37.206460] ffff00081037c180: fa fc fc fc fa fc fc fc fa fc fc fc fa fc fc fc [ 37.213701] ffff00081037c200: fa fc fc fc 05 fc fc fc 03 fc fc fc 02 fc fc fc [ 37.220946] >ffff00081037c280: 06 fc fc fc 03 fc fc fc fc fc fc fc fc fc fc fc [ 37.228186] ^ [ 37.232473] ffff00081037c300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.239718] ffff00081037c380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 37.246962] ================================================================== [ 37.254394] Disabling lock debugging due to kernel taint 0+1 records in 0+1 records out 3 bytes copied, 0.335911 s, 0.0 kB/s Fixes: a5356aef6a90 ("spi: spi-mem: Add driver for NXP FlexSPI controller") Cc: stable@kernel.org Signed-off-by: Han Xu <han.xu@nxp.com> Link: https://patch.msgid.link/20240911211146.3337068-1-han.xu@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11Merge tag 'arm-fixes-6.11-3' of ↵Linus Torvalds8-13/+60
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Arnd Bergmann: "The bulk of the changes this time are for device tree files in the rockchips platform, addressing correctness issues on individual boards, plus one change in the rk356x SoC file to make it match the binding. The only other changes that came in are - a CPU frequencey scaling fix for JH7110 (RISC-V) - a build fix for the cznic hwrandom driver - a fix for a deadlock in qualcomm uefi secure application firmware driver" * tag 'arm-fixes-6.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependency riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz firmware: qcom: uefisecapp: Fix deadlock in qcuefi_acquire() arm64: dts: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF dt-bindings: soc: rockchip: Fix compatibles for RK3588 VO{0,1}_GRF arm64: dts: rockchip: override BIOS_DISABLE signal via GPIO hog on RK3399 Puma arm64: dts: rockchip: fix eMMC/SPI corruption when audio has been used on RK3399 Puma arm64: dts: rockchip: fix PMIC interrupt pin in pinctrl for ROCK Pi E arm64: dts: rockchip: Remove broken tsadc pinctrl binding for rk356x
2024-09-11Merge tag 'for-6.11/dm-fixes-2' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fix from Mikulas Patocka: - fix a race condition in dm-integrity * tag 'for-6.11/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm-integrity: fix a race condition when accessing recalc_sector
2024-09-11Merge tag 'printk-for-6.11-fixup' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk fix from Petr Mladek: - Fix build of serial_core as a module * tag 'printk-for-6.11-fixup' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: Export match_devname_and_update_preferred_console()
2024-09-11minmax: reduce min/max macro expansion in atomisp driverLorenzo Stoakes1-7/+19
Avoid unnecessary nested min()/max() which results in egregious macro expansion. Use clamp_t() as this introduces the least possible expansion, and turn the {s,u}DIGIT_FITTING() macros into inline functions to avoid the nested expansion. This resolves an issue with slackware 15.0 32-bit compilation as reported by Richard Narron. Presumably the min/max fixups would be difficult to backport, this patch should be easier and fix's Richard's problem in 5.15. Reported-by: Richard Narron <richard@aaazen.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Closes: https://lore.kernel.org/all/4a5321bd-b1f-1832-f0c-cea8694dc5aa@aaazen.com/ Fixes: 867046cc7027 ("minmax: relax check to allow comparison between unsigned arguments and signed constants") Cc: stable@vger.kernel.org Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-09-11ASoC: meson: axg-card: fix 'use-after-free'Arseniy Krasnov1-1/+2
Buffer 'card->dai_link' is reallocated in 'meson_card_reallocate_links()', so move 'pad' pointer initialization after this function when memory is already reallocated. Kasan bug report: ================================================================== BUG: KASAN: slab-use-after-free in axg_card_add_link+0x76c/0x9bc Read of size 8 at addr ffff000000e8b260 by task modprobe/356 CPU: 0 PID: 356 Comm: modprobe Tainted: G O 6.9.12-sdkernel #1 Call trace: dump_backtrace+0x94/0xec show_stack+0x18/0x24 dump_stack_lvl+0x78/0x90 print_report+0xfc/0x5c0 kasan_report+0xb8/0xfc __asan_load8+0x9c/0xb8 axg_card_add_link+0x76c/0x9bc [snd_soc_meson_axg_sound_card] meson_card_probe+0x344/0x3b8 [snd_soc_meson_card_utils] platform_probe+0x8c/0xf4 really_probe+0x110/0x39c __driver_probe_device+0xb8/0x18c driver_probe_device+0x108/0x1d8 __driver_attach+0xd0/0x25c bus_for_each_dev+0xe0/0x154 driver_attach+0x34/0x44 bus_add_driver+0x134/0x294 driver_register+0xa8/0x1e8 __platform_driver_register+0x44/0x54 axg_card_pdrv_init+0x20/0x1000 [snd_soc_meson_axg_sound_card] do_one_initcall+0xdc/0x25c do_init_module+0x10c/0x334 load_module+0x24c4/0x26cc init_module_from_file+0xd4/0x128 __arm64_sys_finit_module+0x1f4/0x41c invoke_syscall+0x60/0x188 el0_svc_common.constprop.0+0x78/0x13c do_el0_svc+0x30/0x40 el0_svc+0x38/0x78 el0t_64_sync_handler+0x100/0x12c el0t_64_sync+0x190/0x194 Fixes: 7864a79f37b5 ("ASoC: meson: add axg sound card support") Cc: Stable@vger.kernel.org Signed-off-by: Arseniy Krasnov <avkrasnov@salutedevices.com> Reviewed-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patch.msgid.link/20240911142425.598631-1-avkrasnov@salutedevices.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11drm/amd/display: Add all planes on CRTC to state for overlay cursorLeo Li1-0/+11
[Why] DC has a special commit path for native cursor, which use the built-in cursor pipe within DCN planes. This update path does not require all enabled planes to be added to the list of surface updates sent to DC. This is not the case for overlay cursor; it uses the same path as MPO commits. This update path requires all enabled planes to be added to the list of surface updates sent to DC. Otherwise, DC will disable planes not inside the list. [How] If overlay cursor is needed, add all planes on the same CRTC as this cursor to the atomic state. This is already done for non-cursor planes (MPO), just before the added lines. Fixes: 1b04dcca4fb1 ("drm/amd/display: Introduce overlay cursor mode") Closes: https://lore.kernel.org/lkml/f68020a3-c413-482d-beb2-5432d98a1d3e@amd.com Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Leo Li <sunpeng.li@amd.com> Tested-by: Mikhail Gavrilov <mikhail.v.gavrilov@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> (cherry picked from commit 0c8c5bdd7eaf291b6f727e98506fb68acee3a4cc)
2024-09-11block: unpin user pages belonging to a folio at onceKundan Kumar1-9/+5
Use newly added mm function unpin_user_folio() to put refs by npages count. Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com> Tested-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/20240911064935.5630-5-kundan.kumar@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-11mm: release number of pages of a folioKundan Kumar2-0/+14
Add a new function unpin_user_folio() to put the refs of a folio by npages count. The check for BIO_PAGE_PINNED flag is removed as it is already checked in bio_release_pages(). Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com> Tested-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20240911064935.5630-4-kundan.kumar@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-11block: introduce folio awareness and add a bigger size from folioKundan Kumar1-18/+61
Add a bigger size from folio to bio and skip merge processing for pages. Fetch the offset of page within a folio. Depending on the size of folio and folio_offset, fetch a larger length. This length may consist of multiple contiguous pages if folio is multiorder. Using the length calculate number of pages which will be added to bio and increment the loop counter to skip those pages. This technique helps to avoid overhead of merging pages which belong to same large order folio. Also folio-ize the functions bio_iov_add_page() and bio_iov_add_zone_append_page() Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com> Tested-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20240911064935.5630-3-kundan.kumar@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-11block: Added folio-ized version of bio_add_hw_page()Kundan Kumar2-0/+27
Added new bio_add_hw_folio() function as a wrapper around bio_add_hw_page(). This is a prep patch. Signed-off-by: Kundan Kumar <kundan.kumar@samsung.com> Tested-by: Luis Chamberlain <mcgrof@kernel.org> Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org> Link: https://lore.kernel.org/r/20240911064935.5630-2-kundan.kumar@samsung.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-11ASoC: codecs: avoid possible garbage value in peb2466_reg_read()Su Hui1-1/+2
Clang static checker (scan-build) warning: sound/soc/codecs/peb2466.c:232:8: Assigned value is garbage or undefined [core.uninitialized.Assign] 232 | *val = tmp; | ^ ~~~ When peb2466_read_byte() fails, 'tmp' will have a garbage value. Add a judgemnet to avoid this problem. Fixes: 227f609c7c0e ("ASoC: codecs: Add support for the Infineon PEB2466 codec") Signed-off-by: Su Hui <suhui@nfschina.com> Link: https://patch.msgid.link/20240911115448.277828-1-suhui@nfschina.com Signed-off-by: Mark Brown <broonie@kernel.org>
2024-09-11Merge tag 'riscv-soc-fixes-for-v6.11-final' of ↵Arnd Bergmann1-0/+6
https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux into arm/fixes RISC-V soc fixes for v6.11-final StarFive: A fix to return one of the clocks on the JH7110 from 1 GHz to 1.5 GHz Signed-off-by: Conor Dooley <conor.dooley@microchip.com> * tag 'riscv-soc-fixes-for-v6.11-final' of https://git.kernel.org/pub/scm/linux/kernel/git/conor/linux: riscv: dts: starfive: jh7110-common: Fix lower rate of CPUfreq by setting PLL0 rate to 1.5GHz Link: https://lore.kernel.org/r/20240909-hybrid-groovy-601a33b5b309@spud Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11platform: cznic: turris-omnia-mcu: fix HW_RANDOM dependencyArnd Bergmann1-1/+1
There is still a build failure when the rwrng support is in a loadable module but the mcu driver is built-in: arm-linux-gnueabi-ld: drivers/platform/cznic/turris-omnia-mcu-trng.o: in function `omnia_mcu_register_trng': turris-omnia-mcu-trng.c:(.text.omnia_mcu_register_trng+0x11c): undefined reference to `devm_hwrng_register' Change the dependency to explicitly disallow the broken configuration. Fixes: 41bb142a4028 ("platform: cznic: turris-omnia-mcu: Add support for MCU provided TRNG") Reviewed-by: Marek Behún <kabel@kernel.org> Link: https://lore.kernel.org/r/20240909110417.247453-1-arnd@kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2024-09-11soundwire: stream: Revert "soundwire: stream: fix programming slave ports ↵Krzysztof Kozlowski1-4/+4
for non-continous port maps" This reverts commit ab8d66d132bc8f1992d3eb6cab8d32dda6733c84 because it breaks codecs using non-continuous masks in source and sink ports. The commit missed the point that port numbers are not used as indices for iterating over prop.sink_ports or prop.source_ports. Soundwire core and existing codecs expect that the array passed as prop.sink_ports and prop.source_ports is continuous. The port mask still might be non-continuous, but that's unrelated. Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com> Closes: https://lore.kernel.org/all/b6c75eee-761d-44c8-8413-2a5b34ee2f98@linux.intel.com/ Fixes: ab8d66d132bc ("soundwire: stream: fix programming slave ports for non-continous port maps") Acked-by: Bard Liao <yung-chuan.liao@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Cc: stable@vger.kernel.org Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20240909164746.136629-1-krzysztof.kozlowski@linaro.org Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-09-11Merge branch 'for-6.11-fixup' into for-linusPetr Mladek1-0/+1
2024-09-10riscv: Disable preemption while handling PR_RISCV_CTX_SW_FENCEI_OFFCharlie Jenkins1-6/+6
The icache will be flushed in switch_to() if force_icache_flush is true, or in flush_icache_deferred() if icache_stale_mask is set. Between setting force_icache_flush to false and calculating the new icache_stale_mask, preemption needs to be disabled. There are two reasons for this: 1. If CPU migration happens between force_icache_flush = false, and the icache_stale_mask is set, an icache flush will not be emitted. 2. smp_processor_id() is used in set_icache_stale_mask() to mark the current CPU as not needing another flush since a flush will have happened either by userspace or by the kernel when performing the migration. smp_processor_id() is currently called twice with preemption enabled which causes a race condition. It allows icache_stale_mask to be populated with inconsistent CPU ids. Resolve these two issues by setting the icache_stale_mask before setting force_icache_flush to false, and using get_cpu()/put_cpu() to obtain the smp_processor_id(). Signed-off-by: Charlie Jenkins <charlie@rivosinc.com> Fixes: 6b9391b581fd ("riscv: Include riscv_set_icache_flush_ctx prctl") Link: https://lore.kernel.org/r/20240903-fix_fencei_optimization-v2-1-8025f20171fc@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-09-10drivers: perf: Fix smp_processor_id() use in preemptible codeAlexandre Ghiti1-1/+6
As reported in [1], the use of smp_processor_id() in pmu_sbi_device_probe() must be protected by disabling the preemption, so simple use get_cpu()/put_cpu() instead. Reported-by: Nam Cao <namcao@linutronix.de> Closes: https://lore.kernel.org/linux-riscv/20240820074925.ReMKUPP3@linutronix.de/ [1] Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com> Reviewed-by: Anup Patel <anup@brainfault.org> Tested-by: Nam Cao <namcao@linutronix.de> Fixes: a8625217a054 ("drivers/perf: riscv: Implement SBI PMU snapshot function") Reported-by: Andrea Parri <parri.andrea@gmail.com> Tested-by: Andrea Parri <parri.andrea@gmail.com> Link: https://lore.kernel.org/r/20240826165210.124696-1-alexghiti@rivosinc.com Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-09-10Merge branch '100GbE' of ↵Jakub Kicinski4-15/+23
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-09-09 (ice, igb) This series contains updates to ice and igb drivers. Martyna moves LLDP rule removal to the proper uninitialization function for ice. Jake corrects accounting logic for FWD_TO_VSI_LIST switch filters on ice. Przemek removes incorrect, explicit calls to pci_disable_device() for ice. Michal Schmidt stops incorrect use of VSI list for VLAN use on ice. Sriram Yagnaraman adjusts igb_xdp_ring_update_tail() to be called under Tx lock on igb. * '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: igb: Always call igb_xdp_ring_update_tail() under Tx lock ice: fix VSI lists confusion when adding VLANs ice: stop calling pci_disable_device() as we use pcim ice: fix accounting for filters shared by multiple VSIs ice: Fix lldp packets dropping after changing the number of channels ==================== Link: https://patch.msgid.link/20240909203842.3109822-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10Merge tag 'mlx5-fixes-2024-09-09' of ↵Jakub Kicinski6-23/+60
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== mlx5 fixes 2024-09-09 This series provides bug fixes to mlx5 driver. * tag 'mlx5-fixes-2024-09-09' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: Fix bridge mode operations when there are no VFs net/mlx5: Verify support for scheduling element and TSAR type net/mlx5: Add missing masks and QoS bit masks for scheduling elements net/mlx5: Explicitly set scheduling element and TSAR type net/mlx5e: Add missing link mode to ptys2ext_ethtool_map net/mlx5e: Add missing link modes to ptys2ethtool_map net/mlx5: Update the list of the PCI supported devices ==================== Link: https://patch.msgid.link/20240909194505.69715-1-saeed@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10MAINTAINERS: Add ethtool pse-pd to PSE NETWORK DRIVERKory Maincent1-0/+1
Add net/ethtool/pse-pd.c to PSE NETWORK DRIVER to receive emails concerning modifications to the ethtool part. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Kory Maincent <kory.maincent@bootlin.com> Reviewed-by: Simon Horman <horms@kernel.org> Link: https://patch.msgid.link/20240909114336.362174-1-kory.maincent@bootlin.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10dt-bindings: net: tja11xx: fix the broken bindingWei Fang1-16/+46
As Rob pointed in another mail thread [1], the binding of tja11xx PHY is completely broken, the schema cannot catch the error in the DTS. A compatiable string must be needed if we want to add a custom propety. So extract known PHY IDs from the tja11xx PHY drivers and convert them into supported compatible string list to fix the broken binding issue. Fixes: 52b2fe4535ad ("dt-bindings: net: tja11xx: add nxp,refclk_in property") Link: https://lore.kernel.org/31058f49-bac5-49a9-a422-c43b121bf049@kernel.org # [1] Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Link: https://patch.msgid.link/20240909012152.431647-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10selftests: net: csum: Fix checksums for packets with non-zero paddingSean Anderson1-2/+14
Padding is not included in UDP and TCP checksums. Therefore, reduce the length of the checksummed data to include only the data in the IP payload. This fixes spurious reported checksum failures like rx: pkt: sport=33000 len=26 csum=0xc850 verify=0xf9fe pkt: bad csum Technically it is possible for there to be trailing bytes after the UDP data but before the Ethernet padding (e.g. if sizeof(ip) + sizeof(udp) + udp.len < ip.len). However, we don't generate such packets. Fixes: 91a7de85600d ("selftests/net: add csum offload test") Signed-off-by: Sean Anderson <sean.anderson@linux.dev> Reviewed-by: Willem de Bruijn <willemb@google.com> Link: https://patch.msgid.link/20240906210743.627413-1-sean.anderson@linux.dev Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10net: phy: dp83822: Fix NULL pointer dereference on DP83825 devicesTomas Paukrt1-13/+22
The probe() function is only used for DP83822 and DP83826 PHY, leaving the private data pointer uninitialized for the DP83825 models which causes a NULL pointer dereference in the recently introduced/changed functions dp8382x_config_init() and dp83822_set_wol(). Add the dp8382x_probe() function, so all PHY models will have a valid private data pointer to fix this issue and also prevent similar issues in the future. Fixes: 9ef9ecfa9e9f ("net: phy: dp8382x: keep WOL settings across suspends") Signed-off-by: Tomas Paukrt <tomaspaukrt@email.cz> Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com> Link: https://patch.msgid.link/66w.ZbGt.65Ljx42yHo5.1csjxu@seznam.cz Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-09-10block, bfq: factor out a helper to split bfqq in bfq_init_rq()Yu Kuai1-51/+58
Make code cleaner, there are no functional changes. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240909134154.954924-8-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10block, bfq: remove local variable 'bfqq_already_existing' in bfq_init_rq()Yu Kuai1-21/+16
Now that 'bfqq_already_existing' is only used in one branch, it can be removed. There are no functional changes. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240909134154.954924-7-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10block, bfq: remove local variable 'split' in bfq_init_rq()Yu Kuai1-15/+8
The local variable is used to call bfq_bfqq_resume_state() later, since 'bfqd->lock' is held, and bfqq status will not change between setting 'split' and calling bfq_bfqq_resume_state(), move forward bfq_bfqq_resume_state() so that 'split' can be removed. There are no functional chagnes. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240909134154.954924-6-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10block, bfq: remove bfq_log_bfqg()Yu Kuai1-6/+0
It's not used, hence can be removed. Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240909134154.954924-5-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10block, bfq: merge bfq_release_process_ref() into bfq_put_cooperator()Yu Kuai2-5/+2
Because bfq_put_cooperator() is always followed by bfq_release_process_ref(). Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240909134154.954924-4-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10block, bfq: fix procress reference leakage for bfqq in merge chainYu Kuai1-20/+17
Original state: Process 1 Process 2 Process 3 Process 4 (BIC1) (BIC2) (BIC3) (BIC4) Λ | | | \--------------\ \-------------\ \-------------\| V V V bfqq1--------->bfqq2---------->bfqq3----------->bfqq4 ref 0 1 2 4 After commit 0e456dba86c7 ("block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator()"), if P1 issues a new IO: Without the patch: Process 1 Process 2 Process 3 Process 4 (BIC1) (BIC2) (BIC3) (BIC4) Λ | | | \------------------------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3----------->bfqq4 ref 0 0 2 4 bfqq3 will be used to handle IO from P1, this is not expected, IO should be redirected to bfqq4; With the patch: ------------------------------------------- | | Process 1 Process 2 Process 3 | Process 4 (BIC1) (BIC2) (BIC3) | (BIC4) | | | | \-------------\ \-------------\| V V bfqq1--------->bfqq2---------->bfqq3----------->bfqq4 ref 0 0 2 4 IO is redirected to bfqq4, however, procress reference of bfqq3 is still 2, while there is only P2 using it. Fix the problem by calling bfq_merge_bfqqs() for each bfqq in the merge chain. Also change bfqq_merge_bfqqs() to return new_bfqq to simplify code. Fixes: 0e456dba86c7 ("block, bfq: choose the last bfqq from merge chain in bfq_setup_cooperator()") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240909134154.954924-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10block, bfq: fix uaf for accessing waker_bfqq after splittingYu Kuai1-3/+28
After commit 42c306ed7233 ("block, bfq: don't break merge chain in bfq_split_bfqq()"), if the current procress is the last holder of bfqq, the bfqq can be freed after bfq_split_bfqq(). Hence recored the bfqq and then access bfqq->waker_bfqq may trigger UAF. What's more, the waker_bfqq may in the merge chain of bfqq, hence just recored waker_bfqq is still not safe. Fix the problem by adding a helper bfq_waker_bfqq() to check if bfqq->waker_bfqq is in the merge chain, and current procress is the only holder. Fixes: 42c306ed7233 ("block, bfq: don't break merge chain in bfq_split_bfqq()") Signed-off-by: Yu Kuai <yukuai3@huawei.com> Link: https://lore.kernel.org/r/20240909134154.954924-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10blk-throttle: support prioritized processing of metadataYu Kuai1-22/+43
Currently, blk-throttle handle all IO fifo, hence if data IO is throttled and then meta IO is dispatched, the meta IO will have to wait for the data IO, causing priority inversion problems. This patch support to handle metadata first and then pay debt while throttling data. Test script: use cgroup v1 to throttle root cgroup, then create new dir and file while write back is throttled test() { mkdir /mnt/test/xxx touch /mnt/test/xxx/1 sync /mnt/test/xxx sync /mnt/test/xxx } mkfs.ext4 -F /dev/nvme0n1 -E lazy_itable_init=0,lazy_journal_init=0 mount /dev/nvme0n1 /mnt/test echo "259:0 $((1024*1024))" > /sys/fs/cgroup/blkio/blkio.throttle.write_bps_device dd if=/dev/zero of=/mnt/test/foo1 bs=16M count=1 conv=fdatasync status=none & sleep 4 time test echo "259:0 0" > /sys/fs/cgroup/blkio/blkio.throttle.write_bps_device sleep 1 umount /dev/nvme0n1 Test result: time cost for creating new dir and file before this patch: 14s after this patch: 0.1s Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20240903135149.271857-3-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-09-10blk-throttle: remove last_low_overflow_timeYu Kuai2-9/+1
last_low_overflow_time is not used anymore after commit bf20ab538c81 ("blk-throttle: remove CONFIG_BLK_DEV_THROTTLING_LOW"). Signed-off-by: Yu Kuai <yukuai3@huawei.com> Acked-by: Tejun Heo <tj@kernel.org> Link: https://lore.kernel.org/r/20240903135149.271857-2-yukuai1@huaweicloud.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
Powered by cgit, Gruvboxed by Blaster4385.