| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management and ACPI fixes from Rafael Wysocki:
"These fix one recent regression (cpufreq core), fix up two features
added recently (ACPI CPPC support, SCPI support in the arm_big_little
cpufreq driver) and fix three older bugs in the intel_pstate driver.
Specifics:
- Fix a recent regression in the cpufreq core causing it to fail to
clean up sysfs directories properly on cpufreq driver removal
(Viresh Kumar).
- Fix a build problem in the SCPI support code recently added to the
arm_big_little cpufreq driver (Punit Agrawal).
- Fix up the recently added CPPC cpufreq frontend to process the CPU
coordination information provided by the platform firmware
correctly (Ashwin Chaugule).
- Fix the intel_pstate driver to behave as intended when switched
over to the "performance" mode via sysfs if hardware-driven P-state
selection (HWP) is enabled (Alexandra Yates).
- Fix two rounding errors in the intel_pstate driver that sometimes
cause it to use lower P-states than requested (Prarit Bhargava)"
* tag 'pm+acpi-4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
intel_pstate: Fix "performance" mode behavior with HWP enabled
cpufreq: SCPI: Depend on SCPI clk driver
cpufreq: intel_pstate: Fix limits->max_perf rounding error
cpufreq: intel_pstate: Fix limits->max_policy_pct rounding error
cpufreq: Always remove sysfs cpuX/cpufreq link on ->remove_dev()
cpufreq: CPPC: Initialize and check CPUFreq CPU co-ord type correctly
|
|
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
Ben Skeggs wrote:
A couple of regression fixes, some more boards whitelisted for a hw bug
workaround, gr/ucode fixes for hangs a user is seeing.
The changes look larger than they actually are due to the ucode binaries
(*.fucN.h) being regenerated.
* 'linux-4.4' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/volt/pwm/gk104: fix an off-by-one resulting in the voltage not being set
drm/nouveau/nvif: allow userspace access to its own client object
drm/nouveau/gr/gf100-: fix oops when calling zbc methods
drm/nouveau/gr/gf117-: assume no PPC if NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK is zero
drm/nouveau/gr/gf117-: read NV_PGRAPH_GPC_GPM_PD_PES_TPC_ID_MASK from correct GPC
drm/nouveau/gr/gf100-: split out per-gpc address calculation macro
drm/nouveau/bios: return actual size of the buffer retrieved via _ROM
drm/nouveau/instmem: protect instobj list with a spinlock
drm/nouveau/pci: enable c800 magic for some unknown Samsung laptop
drm/nouveau/pci: enable c800 magic for Clevo P157SM
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are no big surprises but just all small fixes, mostly
device-specific quirks for HD-audio and USB-audio:
- Fix for detection of FireWire DICE Loud devices
- Intel Broxton HDMI/DP PCI IDs and relevant quirks
- Noise fixes: Dell XPS13 2015 model, Dell Latitude E6440, Gigabyte
Z170X mobo
- Fix the headphone mixer assignment on HP laptops for PulseAudio
- USB-MIDI fixes for Medeli DD305 and CH345
- Apply fixup for Acer Aspire One Cloudbook 14"
* tag 'sound-4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Fix noise on Gigabyte Z170X mobo
ALSA: hda - Fix headphone noise after Dell XPS 13 resume back from S3
ALSA: hda - Apply HP headphone fixups more generically
ALSA: hda - Add fixup for Acer Aspire One Cloudbook 14
ALSA: hda - apply SKL display power request/release patch to BXT
ALSA: hda - add PCI IDs for Intel Broxton
ALSA: usb-audio: work around CH345 input SysEx corruption
ALSA: usb-audio: prevent CH345 multiport output SysEx corruption
ALSA: usb-audio: add packet size quirk for the Medeli DD305
ALSA: dice: fix detection of Loud devices
ALSA: hda - Fix noise on Dell Latitude E6440
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- Build fix when !CONFIG_UID16 (the patch is touching generic files but
it only affects arm64 builds; submitted by Arnd Bergmann)
- EFI fixes to deal with early_memremap() returning NULL and correctly
mapping run-time regions
- Fix CPUID register extraction of unsigned fields (not to be
sign-extended)
- ASID allocator fix to deal with long-running tasks over multiple
generation roll-overs
- Revert support for marking page ranges as contiguous PTEs (it leads
to TLB conflicts and requires additional non-trivial kernel changes)
- Proper early_alloc() failure check
- Disable KASan for 48-bit VA and 16KB page configuration (the pgd is
larger than the KASan shadow memory)
- Update the fault_info table (original descriptions based on early
engineering spec)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: efi: fix initcall return values
arm64: efi: deal with NULL return value of early_memremap()
arm64: debug: Treat the BRPs/WRPs as unsigned
arm64: cpufeature: Track unsigned fields
arm64: cpufeature: Add helpers for extracting unsigned values
Revert "arm64: Mark kernel page ranges contiguous"
arm64: mm: keep reserved ASIDs in sync with mm after multiple rollovers
arm64: KASAN depends on !(ARM64_16K_PAGES && ARM64_VA_BITS_48)
arm64: efi: correctly map runtime regions
arm64: mm: fix fault_info table xFSC decoding
arm64: fix building without CONFIG_UID16
arm64: early_alloc: Fix check for allocation failure
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2
Pull nios2 fix from Ley Foon Tan:
"nios2: fix cache coherency"
* tag 'nios2-v4.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/lftan/nios2:
nios2: fix cache coherency
|
|
GCC 4.1 and newer remove empty loops. This becomes a problem when delay
loops get removed. Fixed by rewriting to user the proper Linux interface
for such delays.
Signed-off-by: Ralf Baechle <[email protected]>
Reported-by: Rasmus Villemoes <[email protected]>
Acked-by: John Crispin <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
- Fix for perf callgraph unwinding causing RCU stalls
- Fix to enable Linux to run on non-default Interrupt priority 0
- Removal of pointless SYNC from __switch_to()
* tag 'arc-4.4-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: dw2 unwind: Remove falllback linear search thru FDE entries
ARC: remove SYNC from __switch_to()
ARCv2: Use the default irq priority for idle sleep
ARC: Abstract out ISA specific SLEEP args
ARC: comments update
ARC: switch to arc-linux- CROSS_COMPILE prefix across all configs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into fixes
Merge "ARM: rockchip: devicetree fixes for 4.4" from Heiko Stuebner:
Two fixes to Rockchip devicetree files, disabling the mmc-tuning
on the veyron-minnie board for now and adding the init state for
the over-temperature-protection to prevent glitches making the
system reboot sometimes.
* tag 'v4.4-rockchip-dts32-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Add OTP gpio pinctrl to rk3288 tsadc node
ARM: dts: rockchip: temporarily remove emmc hs200 speed from rk3288 minnie
|
|
Merge "mvebu fixes for 4.4 (part 1)" from Jason Cooper:
- Fix QNAP TS219 power-off in dts
- Fix legacy get_irqnr_and_base for dove and orion5x
* tag 'mvebu-fixes-4.4-1' of git://git.infradead.org/linux-mvebu:
ARM: orion5x: Fix legacy get_irqnr_and_base
ARM: dove: Fix legacy get_irqnr_and_base
ARM: dts: Kirkwood: Fix QNAP TS219 power-off
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Merge "Renesas ARM Based SoC Fixes for v4.4" from Simon Horman:
* r8a7793 SoC: Annotate r8a7793_boards_compat_dt with __initconst
Aside from being correct this builds that otherwise
fail with section mismatch errors.
* tag 'renesas-fixes-for-v4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7793: proper constness with __initconst
|
|
* pm-cpufreq:
intel_pstate: Fix "performance" mode behavior with HWP enabled
cpufreq: SCPI: Depend on SCPI clk driver
cpufreq: intel_pstate: Fix limits->max_perf rounding error
cpufreq: intel_pstate: Fix limits->max_policy_pct rounding error
cpufreq: Always remove sysfs cpuX/cpufreq link on ->remove_dev()
* acpi-cppc:
cpufreq: CPPC: Initialize and check CPUFreq CPU co-ord type correctly
|
|
s3c2410_plls_add is a device notifier that may be called at runtime and
is correctly not marked __init. However it calls s3c_plltab_register()
which is marked __init, and that triggers a build error when we are
checking for section mismatches:
WARNING: vmlinux.o(.text+0x195e0): Section mismatch in reference from the function s3c2410_plls_add() to the function .init.text:s3c_plltab_register()
The function s3c2410_plls_add() references
the function __init s3c_plltab_register().
This is often because s3c2410_plls_add lacks a __init
annotation or the annotation of s3c_plltab_register is wrong.
This removes the __init annotation from s3c2410_plls_add as well as the
__initdata section annotations from s3c2440_plls_12 and s3c2440_plls_169344,
which in turn are referenced from s3c2410_plls_add.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- Fix gntdev and numa balancing.
- Fix x86 boot crash due to unallocated legacy irq descs.
- Fix overflow in evtchn device when > 1024 event channels.
* tag 'for-linus-4.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/evtchn: dynamically grow pending event channel ring
xen/events: Always allocate legacy interrupts on PV guests
xen/gntdev: Grant maps should not be subject to NUMA balancing
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- tm: Block signal return from setting invalid MSR state from Michael
Neuling
- tm: Check for already reclaimed tasks from Michael Neuling
* tag 'powerpc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/tm: Check for already reclaimed tasks
powerpc/tm: Block signal return setting invalid MSR state
|
|
If more than 1024 event channels are bound to a evtchn device then it
possible (even with well behaved applications) for the ring to
overflow and events to be lost (reported as an -EFBIG error).
Dynamically increase the size of the ring so there is always enough
space for all bound events. Well behaved applicables that only unmask
events after draining them from the ring can thus no longer lose
events.
However, an application could unmask an event before draining it,
allowing multiple entries per port to accumulate in the ring, and a
overflow could still occur. So the overflow detection and reporting
is retained.
The ring size is initially only 64 entries so the common use case of
an application only binding a few events will use less memory than
before. The ring size may grow to 512 KiB (enough for all 2^17
possible channels). This order 7 kmalloc() may fail due to memory
fragmentation, so we fall back to trying vmalloc().
Signed-off-by: David Vrabel <[email protected]>
Reviewed-by: Andrew Cooper <[email protected]>
|
|
Even though initcall return values are typically ignored, the
prototype is to return 0 on success or a negative errno value on
error. So fix the arm_enable_runtime_services() implementation to
return 0 on conditions that are not in fact errors, and return a
meaningful error code otherwise.
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Matt Fleming <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Add NULL return value checks to two invocations of early_memremap()
in the UEFI init code. For the UEFI configuration tables, we just
warn since we have a better chance of being able to report the issue
in a way that can actually be noticed by a human operator if we don't
abort right away. For the UEFI memory map, however, all we can do is
panic() since we cannot proceed without a description of memory.
Signed-off-by: Ard Biesheuvel <[email protected]>
Reviewed-by: Matt Fleming <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
IDAA64DFR0_EL1: BRPs and WRPs are unsigned values. Use
the appropriate helpers to extract those fields.
Cc: Ard Biesheuvel <[email protected]>
Reported-by: AKASHI Takahiro <[email protected]>
Acked-by: Will Deacon <[email protected]>
Signed-off-by: Suzuki K. Poulose <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Some of the feature bits have unsigned values and need
to be treated accordingly to avoid errors. Adds the property
to the feature bits and use the appropriate field extract helpers.
Reported-by: AKASHI Takahiro <[email protected]>
Cc: Ard Biesheuvel <[email protected]>
Signed-off-by: Suzuki K. Poulose <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
After commit 8c058b0b9c34 ("x86/irq: Probe for PIC presence before
allocating descs for legacy IRQs") early_irq_init() will no longer
preallocate descriptors for legacy interrupts if PIC does not
exist, which is the case for Xen PV guests.
Therefore we may need to allocate those descriptors ourselves.
Signed-off-by: Boris Ostrovsky <[email protected]>
Suggested-by: Thomas Gleixner <[email protected]>
Signed-off-by: David Vrabel <[email protected]>
|
|
The cpuid_feature_extract_field() extracts the feature value
as a signed integer. This could be problematic for features
whose values are unsigned. e.g, ID_AA64DFR0_EL1:BRPs. Add
an unsigned variant for the unsigned fields.
Cc: Ard Biesheuvel <[email protected]>
Reported-by: AKASHI Takahiro <[email protected]>
Signed-off-by: Suzuki K. Poulose <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Doing so will cause the grant to be unmapped and then, during
fault handling, the fault to be mistakenly treated as NUMA hint
fault.
In addition, even if those maps could partcipate in NUMA
balancing, it wouldn't provide any benefit since we are unable
to determine physical page's node (even if/when VNUMA is
implemented).
Marking grant maps' VMAs as VM_IO will exclude them from being
part of NUMA balancing.
Signed-off-by: Boris Ostrovsky <[email protected]>
Cc: [email protected]
Signed-off-by: David Vrabel <[email protected]>
|
|
With the actual code, read_alarm() always returns -EINVAL when called
during the RTC device registration. This prevents from retrieving an
already configured alarm in hardware.
This patch fixes the issue by moving the HAS_ALARM bit configuration
(if supported by the hardware) above the rtc_device_register() call.
Signed-off-by: Simon Guinot <[email protected]>
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
This reverts commit 348a65cdcbbf243073ee39d1f7d4413081ad7eab.
Incorrect page table manipulation that does not respect the ARM ARM
recommended break-before-make sequence may lead to TLB conflicts. The
contiguous PTE patch makes the system even more susceptible to such
errors by changing the mapping from a single page to a contiguous range
of pages. An additional TLB invalidation would reduce the risk window,
however, the correct fix is to switch to a temporary swapper_pg_dir.
Once the correct workaround is done, the reverted commit will be
re-applied.
Signed-off-by: Catalin Marinas <[email protected]>
Reported-by: Jeremy Linton <[email protected]>
|
|
Under some unusual context-switching patterns, it is possible to end up
with multiple threads from the same mm running concurrently with
different ASIDs:
1. CPU x schedules task t with mm p containing ASID a and generation g
This task doesn't block and the CPU doesn't context switch.
So:
* per_cpu(active_asid, x) = {g,a}
* p->context.id = {g,a}
2. Some other CPU generates an ASID rollover. The global generation is
now (g + 1). CPU x is still running t, with no context switch and
so per_cpu(reserved_asid, x) = {g,a}
3. CPU y schedules task t', which shares mm p with t. The generation
mismatches, so we take the slowpath and hit the reserved ASID from
CPU x. p is then updated so that p->context.id = {g + 1,a}
4. CPU y schedules some other task u, which has an mm != p.
5. Some other CPU generates *another* CPU rollover. The global
generation is now (g + 2). CPU x is still running t, with no context
switch and so per_cpu(reserved_asid, x) = {g,a}.
6. CPU y once again schedules task t', but now *fails* to hit the
reserved ASID from CPU x because of the generation mismatch. This
results in a new ASID being allocated, despite the fact that t is
still running on CPU x with the same mm.
Consequently, TLBIs (e.g. as a result of CoW) will not be synchronised
between the two threads.
This patch fixes the problem by updating all of the matching reserved
ASIDs when we hit on the slowpath (i.e. in step 3 above). This keeps
the reserved ASIDs in-sync with the mm and avoids the problem.
Reported-by: Tony Thompson <[email protected]>
Reviewed-by: Catalin Marinas <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
On KASAN + 16K_PAGES + 48BIT_VA
arch/arm64/mm/kasan_init.c: In function ‘kasan_early_init’:
include/linux/compiler.h:484:38: error: call to ‘__compiletime_assert_95’ declared with attribute error: BUILD_BUG_ON failed: !IS_ALIGNED(KASAN_SHADOW_END, PGDIR_SIZE)
_compiletime_assert(condition, msg, __compiletime_assert_, __LINE__)
Currently KASAN will not work on 16K_PAGES and 48BIT_VA, so
forbid such configuration to avoid above build failure.
Signed-off-by: Andrey Ryabinin <[email protected]>
Reported-by: Suzuki K. Poulose <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
There is intermittent cache coherency issue caught in toolchian tests.
Revert to use flushd.
Signed-off-by: Ley Foon Tan <[email protected]>
|
|
into for-linus2
|
|
into drm-fixes
Radeon and amdgpu fixes for 4.4:
- DPM fixes for r7xx devices
- VCE fixes for Stoney
- GPUVM fixes
- Scheduler fixes
* 'drm-fixes-4.4' of git://people.freedesktop.org/~agd5f/linux:
drm/radeon: make some dpm errors debug only
drm/radeon: make rv770_set_sw_state failures non-fatal
drm/amdgpu: move dependency handling out of atomic section v2
drm/amdgpu: optimize scheduler fence handling
drm/amdgpu: remove vm->mutex
drm/amdgpu: add mutex for ba_va->valids/invalids
drm/amdgpu: adapt vce session create interface changes
drm/amdgpu: vce use multiple cache surface starting from stoney
drm/amdgpu: reset vce trap interrupt flag
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"A couple of fixes for sendfile lockups caught by Dmitry + a fix for
ancient sysvfs symlink breakage"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: Avoid softlockups with sendfile(2)
vfs: Make sendfile(2) killable even better
fix sysvfs symlinks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Merge "Fixes for omaps for v4.4-rc cycle" from Tony Lindgren:
- A series of audio changes for dra7 that missed the merge window but turned
out to be necessary to fix a boot time imprecise external abort error and to
getaudio working
- Fix l4 related boot time errors for dm81xx
- Use lockless cldm/pwrdm api in omap4_boot_secondary
- Remove t410 custom abort handler that is no longer needed and may
hide other critical errors
- Mark cpuidle tracepoints as _rcuidle
- Fix module alias for omap-ocp2scp
* tag 'omap-for-v4.4/fixes-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4+: SMP: use lockless clkdm/pwrdm api in omap4_boot_secondary
arm: omap2+: add missing HWMOD_NO_IDLEST in 81xx hwmod data
ARM: OMAP2+: remove custom abort handler for t410
ARM: OMAP: DRA7: hwmod: Add data for McASP3
ARM: OMAP2+: hwmod: Add hwmod flag for HWMOD_OPT_CLKS_NEEDED
ARM: dts: dra7: Fix McASP3 node regarding to clocks
bus: omap-ocp2scp: Fix module alias
ARM: OMAP2+: PM: Denote the cpuidle tracepoints as _rcuidle()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into fixes
Merge "Few Keystone fixes for 4.4-rcx" from Santosh Shilimkar:
- Fix the optional PDSP firmware loading
- Fix linking RAM setup for QMs
- Fix crash with clk_ignore_unused
* tag 'keystone-fixes-for-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone: k2l: fix kernel crash when clk_ignore_unused is not in bootargs
soc: ti: knav_qmss_queue: Fix linking RAM setup for queue managers
soc: ti: use request_firmware_direct() as acc firmware is optional
|
|
Linux 4.4-rc2 is backmerged from the keystone fixes.
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Merge "The i.MX fixes for 4.4" from Shawn Guo:
- Add missing .irq_set_type for i.MX GPC irq_chip. It fixes an issue
that device IRQ type setting doesn't match the one specified in device
tree, since stacked IRQ domain is adopted in GPC driver.
- Fix the wrong spi-num-chipselects settings for Vybrid DSPI devices.
- Fix a merge error in Vybrid dts regarding to ADC device property
fsl,adck-max-frequency
* tag 'imx-fixes-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: vfxxx: Fix dspi[01] spi-num-chipselects.
ARM: imx: add platform irq type setting in gpc
ARM: dts: vfxxx: Fix erroneous property in esdhc0 node
|
|
If hardware-driven P-state selection (HWP) is enabled, the
"performance" mode of intel_pstate should only allow the processor
to use the highest-performance P-state available. That is not
the case currently, so make it actually happen.
Acked-by: Srinivas Pandruvada <[email protected]>
Signed-off-by: Alexandra Yates <[email protected]>
[ rjw: Subject and changelog ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
pnfs_layout_process will check the returned layout stateid against what
the kernel has in-core. If it turns out that the stateid we received is
older, then we should resend the LAYOUTGET instead of falling back to
MDS I/O.
Signed-off-by: Jeff Layton <[email protected]>
Cc: [email protected] # 3.18+
Signed-off-by: Trond Myklebust <[email protected]>
|
|
If we pass in an empty nfs_fattr struct to nfs_update_inode, it will
(correctly) not update any of the attributes, but it then clears the
NFS_INO_INVALID_ATTR flag, which indicates that the attributes are
up to date. Don't clear the flag if the fattr struct has no valid
attrs to apply.
Reviewed-by: Steve French <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Cc: [email protected]
Signed-off-by: Trond Myklebust <[email protected]>
|
|
If we get no post-op attributes back from a SETATTR operation, then no
attributes will of course be updated during the call to
nfs_update_inode.
We know however that the attributes are invalid at that point, since we
just changed some of them. At the very least, the ctime will be bogus.
If we get no post-op attributes back on the call, mark the attrcache
invalid to reflect that fact.
Reviewed-by: Steve French <[email protected]>
Signed-off-by: Jeff Layton <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
Commit b3a72384fe29 ("ARM/PCI: Replace pci_sys_data->align_resource with
global function pointer") introduced an ARM-specific align_resource()
function pointer. This is not portable to other arches and doesn't work
for platforms with two different PCIe host bridge controllers.
Move the function pointer to the pci_host_bridge structure so each host
bridge driver can specify its own align_resource() function.
Signed-off-by: Gabriele Paoloni <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Arnd Bergmann <[email protected]>
|
|
Pull more block layer fixes from Jens Axboe:
"I wasn't going to send off a new pull before next week, but the blk
flush fix from Jan from the other day introduced a regression. It's
rare enough not to have hit during testing, since it requires both a
device that rejects the first flush, and bad timing while it does
that. But since someone did hit it, let's get the revert into 4.4-rc3
so we don't have a released rc with that known issue.
Apart from that revert, three other fixes:
- From Christoph, a fix for a missing unmap in NVMe request
preparation.
- An NVMe fix from Nishanth that fixes data corruption on powerpc.
- Also from Christoph, fix a list_del() attempt on blk-mq that didn't
have a matching list_add() at timer start"
* 'for-linus' of git://git.kernel.dk/linux-block:
Revert "blk-flush: Queue through IO scheduler when flush not required"
block: fix blk_abort_request for blk-mq drivers
nvme: add missing unmaps in nvme_queue_rq
NVMe: default to 4k device page size
|
|
OMAP CPU hotplug uses cpu1's clocks and power domains for CPU1 wake up
from low power states (or turn on CPU1). This part of code is also
part of system suspend (disable_nonboot_cpus()).
>From other side, cpu1's clocks and power domains are used by CPUIdle. All above
functionality is mutually exclusive and, therefore, lockless clkdm/pwrdm api
can be used in omap4_boot_secondary().
This fixes below back-trace on -RT which is triggered by
pwrdm_lock/unlock():
BUG: sleeping function called from invalid context at kernel/locking/rtmutex.c:917
in_atomic(): 1, irqs_disabled(): 0, pid: 118, name: sh
9 locks held by sh/118:
#0: (sb_writers#4){.+.+.+}, at: [<c0144a6c>] vfs_write+0x13c/0x164
#1: (&of->mutex){+.+.+.}, at: [<c01b4c70>] kernfs_fop_write+0x48/0x19c
#2: (s_active#24){.+.+.+}, at: [<c01b4c78>] kernfs_fop_write+0x50/0x19c
#3: (device_hotplug_lock){+.+.+.}, at: [<c03cbff0>] lock_device_hotplug_sysfs+0xc/0x4c
#4: (&dev->mutex){......}, at: [<c03cd284>] device_online+0x14/0x88
#5: (cpu_add_remove_lock){+.+.+.}, at: [<c003af90>] cpu_up+0x50/0x1a0
#6: (cpu_hotplug.lock){++++++}, at: [<c003ae48>] cpu_hotplug_begin+0x0/0xc4
#7: (cpu_hotplug.lock#2){+.+.+.}, at: [<c003aec0>] cpu_hotplug_begin+0x78/0xc4
#8: (boot_lock){+.+...}, at: [<c002b254>] omap4_boot_secondary+0x1c/0x178
Preemption disabled at:[< (null)>] (null)
CPU: 0 PID: 118 Comm: sh Not tainted 4.1.12-rt11-01998-gb4a62c3-dirty #137
Hardware name: Generic DRA74X (Flattened Device Tree)
[<c0017574>] (unwind_backtrace) from [<c0013be8>] (show_stack+0x10/0x14)
[<c0013be8>] (show_stack) from [<c05a8670>] (dump_stack+0x80/0x94)
[<c05a8670>] (dump_stack) from [<c05ad158>] (rt_spin_lock+0x24/0x54)
[<c05ad158>] (rt_spin_lock) from [<c0030dac>] (clkdm_wakeup+0x10/0x2c)
[<c0030dac>] (clkdm_wakeup) from [<c002b2c0>] (omap4_boot_secondary+0x88/0x178)
[<c002b2c0>] (omap4_boot_secondary) from [<c0015d00>] (__cpu_up+0xc4/0x164)
[<c0015d00>] (__cpu_up) from [<c003b09c>] (cpu_up+0x15c/0x1a0)
[<c003b09c>] (cpu_up) from [<c03cd2d4>] (device_online+0x64/0x88)
[<c03cd2d4>] (device_online) from [<c03cd360>] (online_store+0x68/0x74)
[<c03cd360>] (online_store) from [<c01b4ce0>] (kernfs_fop_write+0xb8/0x19c)
[<c01b4ce0>] (kernfs_fop_write) from [<c0144124>] (__vfs_write+0x20/0xd8)
[<c0144124>] (__vfs_write) from [<c01449c0>] (vfs_write+0x90/0x164)
[<c01449c0>] (vfs_write) from [<c01451e4>] (SyS_write+0x44/0x9c)
[<c01451e4>] (SyS_write) from [<c0010240>] (ret_fast_syscall+0x0/0x54)
CPU1: smp_ops.cpu_die() returned, trying to resuscitate
Cc: Tero Kristo <[email protected]>
Signed-off-by: Grygorii Strashko <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
|
|
|
|
Add missing HWMOD_NO_IDLEST hwmod flag for entries not
having omap4 clkctrl values.
The emac0 hwmod flag fixes the davinci_emac driver probe
since the return of pm_resume() call is now checked.
This solves the following boot errors :
[ 0.121429] omap_hwmod: l4_ls: _wait_target_ready failed: -16
[ 0.121441] omap_hwmod: l4_ls: cannot be enabled for reset (3)
[ 0.124342] omap_hwmod: l4_hs: _wait_target_ready failed: -16
[ 0.124352] omap_hwmod: l4_hs: cannot be enabled for reset (3)
[ 1.967228] omap_hwmod: emac0: _wait_target_ready failed: -16
Cc: Brian Hutchinson <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Signed-off-by: Tony Lindgren <[email protected]>
|
|
This reverts commit 1b2ff19e6a957b1ef0f365ad331b608af80e932e.
Jan writes:
--
Thanks for report! After some investigation I found out we allocate
elevator specific data in __get_request() only for non-flush requests. And
this is actually required since the flush machinery uses the space in
struct request for something else. Doh. So my patch is just wrong and not
easy to fix since at the time __get_request() is called we are not sure
whether the flush machinery will be used in the end. Jens, please revert
1b2ff19e6a957b1ef0f365ad331b608af80e932e. Thanks!
I'm somewhat surprised that you can reliably hit the race where flushing
gets disabled for the device just while the request is in flight. But I
guess during boot it makes some sense.
--
So let's just revert it, we can fix the queue run manually after the
fact. This race is rare enough that it didn't trigger in testing, it
requires the specific disable-while-in-flight scenario to trigger.
|
|
Pull KVM fixes from Paolo Bonzini:
"Bug fixes for all architectures. Nothing really stands out"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (21 commits)
KVM: nVMX: remove incorrect vpid check in nested invvpid emulation
arm64: kvm: report original PAR_EL1 upon panic
arm64: kvm: avoid %p in __kvm_hyp_panic
KVM: arm/arm64: vgic: Trust the LR state for HW IRQs
KVM: arm/arm64: arch_timer: Preserve physical dist. active state on LR.active
KVM: arm/arm64: Fix preemptible timer active state crazyness
arm64: KVM: Add workaround for Cortex-A57 erratum 834220
arm64: KVM: Fix AArch32 to AArch64 register mapping
ARM/arm64: KVM: test properly for a PTE's uncachedness
KVM: s390: fix wrong lookup of VCPUs by array index
KVM: s390: avoid memory overwrites on emergency signal injection
KVM: Provide function for VCPU lookup by id
KVM: s390: fix pfmf intercept handler
KVM: s390: enable SIMD only when no VCPUs were created
KVM: x86: request interrupt window when IRQ chip is split
KVM: x86: set KVM_REQ_EVENT on local interrupt request from user space
KVM: x86: split kvm_vcpu_ready_for_interrupt_injection out of dm_request_for_irq_injection
KVM: x86: fix interrupt window handling in split IRQ chip case
MIPS: KVM: Uninit VCPU in vcpu_create error path
MIPS: KVM: Fix CACHE immediate offset sign extension
...
|
|
"Could not force DPM to low", etc. is usually harmless and
just confuses users.
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
The kernel may use a page granularity of 4K, 16K, or 64K depending on
configuration.
When mapping EFI runtime regions, we use memrange_efi_to_native to round
the physical base address of a region down to a kernel page boundary,
and round the size up to a kernel page boundary, adding the residue left
over from rounding down the physical base address. We do not round down
the virtual base address.
In __create_mapping we account for the offset of the virtual base from a
granule boundary, adding the residue to the size before rounding the
base down to said granule boundary.
Thus we account for the residue twice, and when the residue is non-zero
will cause __create_mapping to map an additional page at the end of the
region. Depending on the memory map, this page may be in a region we are
not intended/permitted to map, or may clash with a different region that
we wish to map. In typical cases, mapping the next item in the memory
map will overwrite the erroneously created entry, as we sort the memory
map in the stub.
As __create_mapping can cope with base addresses which are not page
aligned, we can instead rely on it to map the region appropriately, and
simplify efi_virtmap_init by removing the unnecessary code.
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Ard Biesheuvel <[email protected]>
Cc: Leif Lindholm <[email protected]>
Cc: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
We are missing descriptions for some valid xFSC values in the fault info
table (e.g. "TLB conflict abort"), and have erroneous descriptions for
reserved values (e.g. "asynchronous external abort", "debug event").
This patch adds the missing xFSC values, and removes erroneous decoding
of values reserved by the architecture, as described in ARM DDI 0487A.h.
At the same time, fixed the unbalanced brackets for the synchronous
parity error strings in the table.
Signed-off-by: Mark Rutland <[email protected]>
Reviewed-by: Will Deacon <[email protected]>
Signed-off-by: Catalin Marinas <[email protected]>
|
|
As reported by Michal Simek, building an ARM64 kernel with CONFIG_UID16
disabled currently fails because the system call table still needs to
reference the individual function entry points that are provided by
kernel/sys_ni.c in this case, and the declarations are hidden inside
of #ifdef CONFIG_UID16:
arch/arm64/include/asm/unistd32.h:57:8: error: 'sys_lchown16' undeclared here (not in a function)
__SYSCALL(__NR_lchown, sys_lchown16)
I believe this problem only exists on ARM64, because older architectures
tend to not need declarations when their system call table is built
in assembly code, while newer architectures tend to not need UID16
support. ARM64 only uses these system calls for compatibility with
32-bit ARM binaries.
This changes the CONFIG_UID16 check into CONFIG_HAVE_UID16, which is
set unconditionally on ARM64 with CONFIG_COMPAT, so we see the
declarations whenever we need them, but otherwise the behavior is
unchanged.
Fixes: af1839eb4bd4 ("Kconfig: clean up the long arch list for the UID16 config option")
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Will Deacon <[email protected]>
Cc: [email protected]
Signed-off-by: Catalin Marinas <[email protected]>
|
|
Commit 5be9fc23cd ("ARM: orion5x: fix legacy orion5x IRQ numbers") shifted
IRQ numbers by one but didn't update the get_irqnr_and_base macro
accordingly. This macro is involved when CONFIG_MULTI_IRQ_HANDLER
is not defined.
[jac: 5d6bed2a9c went in to v4.2, but was backported to v3.18]
Signed-off-by: Nicolas Pitre <[email protected]>
Fixes: 5be9fc23cd ("ARM: orion5x: fix legacy orion5x IRQ numbers")
Cc: <[email protected]> # v3.18+
Signed-off-by: Jason Cooper <[email protected]>
|