aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-01-02perf thread-stack: Tidy thread_stack__bottom() usageAdrian Hunter1-4/+3
In preparation for fixing thread stack processing for the idle task, tidy thread_stack__bottom() usage. Specifically, the parameter 'thread' is not needed. Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-01-02perf thread-stack: Simplify some code in thread_stack__process()Adrian Hunter1-11/+7
In preparation for fixing thread stack processing for the idle task, simplify some code in thread_stack__process(). Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2019-01-02thermal: generic-adc: Fix adc to temp interpolationBjorn Andersson1-4/+8
First correct the edge case to return the last element if we're outside the range, rather than at the last element, so that interpolation is not omitted for points between the two last entries in the table. Then correct the formula to perform linear interpolation based the two points surrounding the read ADC value. The indices for temp are kept as "hi" and "lo" to pair with the adc indices, but there's no requirement that the temperature is provided in descendent order. mult_frac() is used to prevent issues with overflowing the int. Cc: Laxman Dewangan <[email protected]> Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal: rcar_thermal: add R8A77990 supportYoshihiro Kaneko1-0/+4
Add support for R-Car E3 (R8A77990) thermal support. Signed-off-by: Yoshihiro Kaneko <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02dt-bindings: thermal: rcar-thermal: add R8A77990 supportYoshihiro Kaneko1-2/+3
Document the R-Car E3 (R8A77990) SoC bindings. Signed-off-by: Yoshihiro Kaneko <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Simon Horman <[email protected]> Tested-by: Simon Horman <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal: rcar_thermal: add R8A774C0 supportFabrizio Castro1-0/+4
Add thermal support for the RZ/G2E SoC (a.k.a. R8A774C0). Signed-off-by: Fabrizio Castro <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02dt-bindings: thermal: rcar-thermal: add R8A774C0 supportFabrizio Castro1-2/+3
Document RZ/G2E SoC (a.k.a. r8a774c0) bindings. Signed-off-by: Fabrizio Castro <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02dt-bindings: cp110: document the thermal interrupt capabilitiesMiquel Raynal1-0/+9
The thermal IP can produce interrupts on overheat situation. Describe them. Signed-off-by: Miquel Raynal <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02dt-bindings: ap806: document the thermal interrupt capabilitiesMiquel Raynal1-0/+7
The thermal IP can produce interrupts on overheat situation. Describe them. Signed-off-by: Miquel Raynal <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02MAINTAINERS: thermal: add entry for Marvell MVEBU thermal driverMiquel Raynal1-0/+5
Add myself as Marvell MVEBU thermal driver maintainer. Signed-off-by: Miquel Raynal <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal: armada: add overheat interrupt supportMiquel Raynal1-1/+269
The IP can manage to trigger interrupts on overheat situation from all the sensors. However, the interrupt source changes along with the last selected source (ie. the last read sensor), which is an inconsistent behavior. Avoid possible glitches by always selecting back only one channel which will then be referenced as the "overheat_sensor" (arbitrarily: the first in the DT which has a critical trip point filled in). It is possible that the scan of all thermal zone nodes did not bring a critical trip point from which the overheat interrupt could be configured. In this case just complain but do not fail the probe. Also disable sensor switch during overheat situations because changing the channel while the system is too hot could clear the overheat state by changing the source while the temperature is still very high. Even if the overheat state is not declared, overheat interrupt must be cleared by reading the DFX interrupt cause _after_ the temperature has fallen down to the low threshold, otherwise future possible interrupts would not be served. A work polls the corresponding register until the overheat flag gets cleared in this case. Suggested-by: David Sniatkiwicz <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal: st: fix Makefile typoArnd Bergmann1-1/+1
When STM32_THERMAL is enabled, this overrides all previously enabled files in the same directory, as seen from this link failure: ERROR: "st_thermal_pm_ops" [drivers/thermal/st/st_thermal_syscfg.ko] undefined! ERROR: "st_thermal_register" [drivers/thermal/st/st_thermal_syscfg.ko] undefined! ERROR: "st_thermal_unregister" [drivers/thermal/st/st_thermal_syscfg.ko] undefined! The correct syntax in Makefile requires using += instead of :=. Fixes: 1d6931556073 ("thermal: add stm32 thermal driver") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Daniel Lezcano <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal: uniphier: Convert to SPDX identifierKunihiko Hayashi1-12/+1
This converts license boilerplate to SPDX identifier, and removes unnecessary lines. Signed-off-by: Kunihiko Hayashi <[email protected]> Reviewed-by: Daniel Lezcano <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal/intel_powerclamp: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li1-13/+1
Use macro to simplify the code. Signed-off-by: Yangtao Li <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal: tegra: soctherm: Change to use DEFINE_SHOW_ATTRIBUTE macroYangtao Li1-11/+1
Use macro to simplify the code. Signed-off-by: Yangtao Li <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02dt-bindings: thermal: tegra-bpmp: Add Tegra194 supportThierry Reding2-1/+17
The thermal controller implementation on Tegra194 is very similar to the implementation on Tegra186. Add a compatible string for the new generation. Signed-off-by: Thierry Reding <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal: imx: save one condition block for normal case of nvmem initializationAnson Huang1-2/+3
Put return value checks of calling imx_init_from_nvmem_cells() into one block to save one condition block for normal case. Signed-off-by: Anson Huang <[email protected]> Acked-by: Viresh Kumar <[email protected]> Reviewed-by: Daniel Lezcano <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal: imx: fix for dependency on cpu-freqAnson Huang2-13/+36
The thermal driver is a standalone driver for monitoring SoC temperature by enabling thermal sensor, so it can be enabled even when CONFIG_CPU_FREQ is NOT set. So remove the dependency with CPU_THERMAL. Introduce dummy function of legacy cooling register/unregister to make thermal driver probe successfully when CONFIG_CPU_FREQ is NOT set. Signed-off-by: Anson Huang <[email protected]> Acked-by: Viresh Kumar <[email protected]> Reviewed-by: Daniel Lezcano <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal: tsens: qcom: do not create duplicate regmap debugfs entriesSrinivas Kandagatla1-2/+10
Regmap would use device name to create debugfs entries. If the device has multiple regmaps it is recommended to use name field in regmap_config. Fix this by providing name to the regmap configs correctly. Without this patch we would see below error on DB820c. qcom-tsens 4a9000.thermal-sensor: Failed to create 4a9000.thermal-sensor debugfs directory Signed-off-by: Srinivas Kandagatla <[email protected]> Acked-by: Amit Kucheria <[email protected]> Tested-by: Amit Kucheria <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal: armada: Use PTR_ERR_OR_ZERO in armada_thermal_probe_legacy()YueHaibing1-8/+2
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Daniel Lezcano <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02dt-bindings: thermal: rcar-gen3-thermal: All variants use 3 interruptsGeert Uytterhoeven1-2/+1
RZ/G2M also has 3 interrupts routed to the TSC, but the list was not updated to reflect this. Just drop the list, as this is the case for this TSC variant in all R-Car Gen3 and RZ/G2 SoCs. Fixes: be6af481f3b2d508 ("dt-bindings: thermal: rcar-gen3-thermal: Add r8a774a1 support") Signed-off-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Fabrizio Castro <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal: broadcom: use devm_thermal_zone_of_sensor_registerJulia Lawall1-20/+4
Using devm_thermal_zone_of_sensor_register allows to simplify some error handling code, drop a label, and drop the remove function. Signed-off-by: Julia Lawall <[email protected]> Reviewed-by: Daniel Lezcano <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal: bcm2835: enable hwmon explicitlyMatthias Brugger1-0/+11
By defaul of-based thermal driver do not enable hwmon. This patch does this explicitly, so that the temperature can be read through the common hwmon sysfs. Signed-off-by: Matthias Brugger <[email protected]> Acked-by: Stefan Wahren <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02thermal: hwmon: inline helpers when CONFIG_THERMAL_HWMON is not setEduardo Valentin1-2/+2
Avoid warnings like this: thermal_hwmon.h:29:1: warning: ‘thermal_remove_hwmon_sysfs’ defined but not used [-Wunused-function] thermal_remove_hwmon_sysfs(struct thermal_zone_device *tz) Fixes: 0dd88793aacd ("thermal: hwmon: move hwmon support to single file") Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Eduardo Valentin <[email protected]>
2019-01-02Merge branches 'misc', 'sa1100-for-next' and 'spectre' into for-linusRussell King32-478/+581
2019-01-01PCI: imx: Enable MSI from downstream componentsRichard Zhu1-0/+10
The MSI Enable bit in the MSI Capability (PCIe r4.0, sec 7.7.1.2) controls whether a Function can request service using MSI. i.MX6 Root Ports implement the MSI Capability and may use MSI to request service for events like PME, hotplug, AER, etc. In addition, on i.MX6, the MSI Enable bit controls delivery of MSI interrupts from components below the Root Port. Prior to f3fdfc4ac3a2 ("PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS"), enabling CONFIG_PCI_IMX6 automatically also enabled CONFIG_PCIEPORTBUS, and when portdrv claimed the Root Ports, it set the MSI Enable bit so it could use PME, hotplug, AER, etc. As a side effect, that also enabled delivery of MSI interrupts from downstream components. The imx6q-pcie driver itself does not depend on portdrv, so set MSI Enable in imx6q-pcie so MSI from downstream components works even if nobody uses MSI for the Root Port events. Fixes: f3fdfc4ac3a2 ("PCI: Remove host driver Kconfig selection of CONFIG_PCIEPORTBUS") Signed-off-by: Richard Zhu <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Tested-by: Sven Van Asbroeck <[email protected]> Tested-by: Trent Piepho <[email protected]> Reviewed-by: Lucas Stach <[email protected]> Acked-by: Lorenzo Pieralisi <[email protected]>
2019-01-01s390/pci: skip VF scanningSebastian Ott1-0/+3
Set the flag to skip scanning for VFs after SR-IOV enablement. VF creation will be triggered by the hotplug code. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2019-01-01PCI/IOV: Add flag so platforms can skip VF scanningSebastian Ott2-0/+7
Provide a flag to skip scanning for new VFs after SR-IOV enablement. This can be set by implementations for which the VFs are already reported by other means. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2019-01-01PCI/IOV: Factor out sriov_add_vfs()Sebastian Ott1-13/+31
Provide sriov_add_vfs() as a wrapper to scan for VFs that cleans up after itself. This is just a code simplification. No functional change. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2019-01-01Merge tag 'iommu-updates-v4.21' of ↵Linus Torvalds46-917/+1612
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - Page table code for AMD IOMMU now supports large pages where smaller page-sizes were mapped before. VFIO had to work around that in the past and I included a patch to remove it (acked by Alex Williamson) - Patches to unmodularize a couple of IOMMU drivers that would never work as modules anyway. - Work to unify the the iommu-related pointers in 'struct device' into one pointer. This work is not finished yet, but will probably be in the next cycle. - NUMA aware allocation in iommu-dma code - Support for r8a774a1 and r8a774c0 in the Renesas IOMMU driver - Scalable mode support for the Intel VT-d driver - PM runtime improvements for the ARM-SMMU driver - Support for the QCOM-SMMUv2 IOMMU hardware from Qualcom - Various smaller fixes and improvements * tag 'iommu-updates-v4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (78 commits) iommu: Check for iommu_ops == NULL in iommu_probe_device() ACPI/IORT: Don't call iommu_ops->add_device directly iommu/of: Don't call iommu_ops->add_device directly iommu: Consolitate ->add/remove_device() calls iommu/sysfs: Rename iommu_release_device() dmaengine: sh: rcar-dmac: Use device_iommu_mapped() xhci: Use device_iommu_mapped() powerpc/iommu: Use device_iommu_mapped() ACPI/IORT: Use device_iommu_mapped() iommu/of: Use device_iommu_mapped() driver core: Introduce device_iommu_mapped() function iommu/tegra: Use helper functions to access dev->iommu_fwspec iommu/qcom: Use helper functions to access dev->iommu_fwspec iommu/of: Use helper functions to access dev->iommu_fwspec iommu/mediatek: Use helper functions to access dev->iommu_fwspec iommu/ipmmu-vmsa: Use helper functions to access dev->iommu_fwspec iommu/dma: Use helper functions to access dev->iommu_fwspec iommu/arm-smmu: Use helper functions to access dev->iommu_fwspec ACPI/IORT: Use helper functions to access dev->iommu_fwspec iommu: Introduce wrappers around dev->iommu_fwspec ...
2019-01-01Merge tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds41-394/+2296
Pull dmaengine updates from Vinod Koul: "This includes a new driver, removes R-Mobile APE6 as it is no longer used, sprd cyclic dma support, last batch of dma_slave_config direction removal and random updates to bunch of drivers. Summary: - New driver for UniPhier MIO DMA controller - Remove R-Mobile APE6 support - Sprd driver updates and support for cyclic link-list - Remove dma_slave_config direction usage from rest of drivers - Minor updates to dmatest, dw-dmac, zynqmp and bcm dma drivers" * tag 'dmaengine-4.21-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (48 commits) dmaengine: qcom_hidma: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: pxa: remove DBGFS_FUNC_DECL() dmaengine: mic_x100_dma: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: amba-pl08x: convert to DEFINE_SHOW_ATTRIBUTE dmaengine: Documentation: Add documentation for multi chan testing dmaengine: dmatest: Add transfer_size parameter dmaengine: dmatest: Add alignment parameter dmaengine: dmatest: Use fixed point div to calculate iops dmaengine: dmatest: Add support for multi channel testing dmaengine: rcar-dmac: Document R8A774C0 bindings dt-bindings: dmaengine: usb-dmac: Add binding for r8a774c0 dmaengine: zynqmp_dma: replace spin_lock_bh with spin_lock_irqsave dmaengine: sprd: Add me as one of the module authors dmaengine: sprd: Support DMA 2-stage transfer mode dmaengine: sprd: Support DMA link-list cyclic callback dmaengine: sprd: Set cur_desc as NULL when free or terminate one dma channel dmaengine: sprd: Fix the last link-list configuration dmaengine: sprd: Get transfer residue depending on the transfer direction dmaengine: sprd: Remove direction usage from struct dma_slave_config dmaengine: dmatest: fix a small memory leak in dmatest_func() ...
2019-01-01Merge tag 'kgdb-4.21-rc1' of ↵Linus Torvalds20-141/+125
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux Pull kgdb updates from Daniel Thompson: "Mostly clean ups although while Doug's was chasing down a odd lockdep warning he also did some work to improved debugger resilience when some CPUs fail to respond to the round up request. The main changes are: - Fixing a lockdep warning on architectures that cannot use an NMI for the round up plus related changes to make CPU round up and all CPU backtrace more resilient. - Constify the arch ops tables - A couple of other small clean ups Two of the three patchsets here include changes that spill over into arch/. Changes in the arch space are relatively narrow in scope (and directly related to kgdb). Didn't get comprehensive acks but all impacted maintainers were Cc:ed in good time" * tag 'kgdb-4.21-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kgdb/treewide: constify struct kgdb_arch arch_kgdb_ops mips/kgdb: prepare arch_kgdb_ops for constness kdb: use bool for binary state indicators kdb: Don't back trace on a cpu that didn't round up kgdb: Don't round up a CPU that failed rounding up before kgdb: Fix kgdb_roundup_cpus() for arches who used smp_call_function() kgdb: Remove irq flags from roundup
2019-01-01Merge tag 'for-linus' of git://github.com/openrisc/linuxLinus Torvalds2-2/+2
Pull OpenRISC update from Stafford Horne: "Just one change for 4.21: Update comments for name change or32 -> or1k from Geert Uytterhoeven" * tag 'for-linus' of git://github.com/openrisc/linux: openrisc: Fix broken paths to arch/or32
2019-01-01Merge tag 'rtc-4.21' of ↵Linus Torvalds52-566/+744
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux Pull RTC updates from Alexandre Belloni: "Subsystem: - new %ptR printk format - rename core files - allow registration of multiple nvmem devices New driver: - i.MX system controller RTC Driver updates: - abx80x: handle voltage ioctls, correct binding doc - m41t80: correct month in alarm reads - pcf85363: add pcf85263 support - pcf8523: properly handle battery low flag - s3c: limit alarm to one year in the future as ALMYEAR is broken - sun6i: rework clock output binding" * tag 'rtc-4.21' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (54 commits) rtc: rename core files rtc: nvmem: fix possible use after free rtc: add i.MX system controller RTC support dt-bindings: fsl: scu: add rtc binding rtc: pcf2123: Add Microcrystal rv2123 rtc: class: reimplement devm_rtc_device_register rtc: enforce rtc_timer_init private_data type rtc: abx80x: Implement RTC_VL_READ,CLR ioctls rtc: pcf85363: Add support for NXP pcf85263 rtc dt-bindings: rtc: pcf85363: Document pcf85263 real-time clock rtc: pcf8523: don't return invalid date when battery is low dt-bindings: rtc: use a generic node name for ds1307 PM: Switch to use %ptR m68k/mac: Switch to use %ptR Input: hp_sdc_rtc - Switch to use %ptR rtc: tegra: Switch to use %ptR rtc: s5m: Switch to use %ptR rtc: s3c: Switch to use %ptR rtc: rx8025: Switch to use %ptR rtc: rx6110: Switch to use %ptR ...
2019-01-01Merge tag 'pinctrl-v4.21-1' of ↵Linus Torvalds117-1164/+14244
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control updates from Linus Walleij: "We have no core changes but lots of incremental development in drivers all over the place: Renesas, NXP, Mediatek and Actions Semiconductor keep churning out new SoCs. I have some subtree maintainers for Renesas and Intel helping out to keep down the load, it's been working smoothly (Samsung also have a subtree but it was not used this cycle.) New drivers: - NXP (ex Freescale) i.MX 8 QXP SoC driver. - Mediatek MT6797 SoC driver. - Mediatek MT7629 SoC driver. - Actions Semiconductor S700 SoC driver. - Renesas RZ/A2 SoC driver. - Allwinner sunxi suniv F1C100 SoC driver. - Qualcomm PMS405 PMIC driver. - Microsemi Ocelot Jaguar2 SoC driver. Improvements: - Some RT improvements (using raw spinlocks where appropriate). - A lot of new pin sets on the Renesas PFC pin controllers. - GPIO hogs now work on the Qualcomm SPMI/SSBI pin controller GPIO chips, and Xway. - Major modernization of the Intel pin control drivers. - STM32 pin control driver will now synchronize usage of pins with another CPU using a hardware spinlock" * tag 'pinctrl-v4.21-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (145 commits) dt-bindings: arm: fsl-scu: add imx8qm pinctrl support pinctrl: freescale: Break dependency on SOC_IMX8MQ for i.MX8MQ pinctrl: imx-scu: Depend on IMX_SCU pinctrl: ocelot: Add dependency on HAS_IOMEM pinctrl: ocelot: add MSCC Jaguar2 support pinctrl: bcm: ns: support updated DT binding as syscon subnode dt-bindings: pinctrl: bcm4708-pinmux: rework binding to use syscon MAINTAINERS: merge at91 pinctrl entries pinctrl: imx8qxp: break the dependency on SOC_IMX8QXP pinctrl: uniphier: constify uniphier_pinctrl_socdata pinctrl: mediatek: improve Kconfig dependencies pinctrl: msm: mark PM functions as __maybe_unused dt-bindings: pinctrl: sunxi: Add supply properties pinctrl: meson: meson8b: add the missing GPIO_GROUPs for BOOT and CARD pinctrl: meson: meson8: add the missing GPIO_GROUPs for BOOT and CARD pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs" pinctrl: meson: meson8: rename the "gpio" function to "gpio_periphs" pinctrl: meson: meson8b: fix the GPIO function for the GPIOAO pins pinctrl: meson: meson8: fix the GPIO function for the GPIOAO pins pinctrl: sh-pfc: Make pinmux_cfg_reg.var_field_width[] variable-length ...
2019-01-01Merge tag 'linux-watchdog-4.21-rc1' of ↵Linus Torvalds20-111/+529
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - add TQ-Systems TQMX86 watchdog driver - add Qualcomm PM8916 watchdog driver - w83627hf_wdt: add quirk for Inves system - renesas_wdt: several improvements and document r8a774c0 support - mena21_wdt, mtx-1: Convert to use GPIO descriptor - bcm281xx, ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE - documentation: add PM usage and kernel-api: don't reference removed functions - update bindings for MT7629 SoC - several small fixes * tag 'linux-watchdog-4.21-rc1' of git://www.linux-watchdog.org/linux-watchdog: (22 commits) watchdog: tqmx86: Add watchdog driver for the IO controller dt-bindings: watchdog: renesas-wdt: Document r8a774c0 support watchdog: docs: kernel-api: don't reference removed functions watchdog: add documentation for PM usage watchdog: mtx-1: Convert to use GPIO descriptor watchdog: mena21_wdt: Convert to GPIO descriptors dt-bindings: watchdog: Add Qualcomm PM8916 watchdog watchdog: Add pm8916 watchdog driver dt-bindings: watchdog: update bindings for MT7629 SoC watchdog: renesas_wdt: don't keep timer value during suspend/resume watchdog: ie6xx_wdt: convert to DEFINE_SHOW_ATTRIBUTE watchdog: bcm281xx: convert to DEFINE_SHOW_ATTRIBUTE watchdog: asm9260_wdt: make array mode_name static, shrinks object size watchdog/hpwdt: Update driver version. watchdog/hpwdt: Do not claim unsupported hardware watchdog/hpwdt: Exclude via blacklist Watchdog: remove outdated comment watchdog: w83627hf_wdt: Add quirk for Inves system watchdog: cpwd: add of_node_put() watchdog: renesas_wdt: don't set divider while watchdog is running ...
2019-01-01KEYS: fix parsing invalid pkey info stringEric Biggers1-0/+2
We need to check the return value of match_token() for Opt_err before doing anything with it. [ Not only did the old "-1" value for Opt_err cause problems for the __test_and_set_bit(), as fixed in commit 94c13f66e13c ("security: don't use a negative Opt_err token index"), but accessing "args[0].from" is invalid for the Opt_err case, as pointed out by Eric later. - Linus ] Reported-by: [email protected] Fixes: 00d60fd3b932 ("KEYS: Provide keyctls to drive the new key type ops for asymmetric keys [ver #2]") Signed-off-by: Eric Biggers <[email protected]> Cc: [email protected] # 4.20 Signed-off-by: Linus Torvalds <[email protected]>
2019-01-01net: hns3: call hns3_nic_net_open() while doing HNAE3_UP_CLIENTHuazhong Tan1-3/+4
For HNAE3_DOWN_CLIENT calling hns3_nic_net_stop(), HNAE3_UP_CLIENT should call hns3_nic_net_open(), since if the number of queue or the map of TC has is changed before HHAE3_UP_CLIENT is called, it will cause problem. Also the HNS3_NIC_STATE_RESETTING flag needs to be cleared before hns3_nic_net_open() called, and set it back while hns3_nic_net_open() failed. Fixes: bb6b94a896d4 ("net: hns3: Add reset interface implementation in client") Signed-off-by: Huazhong Tan <[email protected]> Signed-off-by: Yunsheng Lin <[email protected]> Signed-off-by: Peng Li <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-01ip: validate header length on virtual device xmitWillem de Bruijn9-32/+66
KMSAN detected read beyond end of buffer in vti and sit devices when passing truncated packets with PF_PACKET. The issue affects additional ip tunnel devices. Extend commit 76c0ddd8c3a6 ("ip6_tunnel: be careful when accessing the inner header") and commit ccfec9e5cb2d ("ip_tunnel: be careful when accessing the inner header"). Move the check to a separate helper and call at the start of each ndo_start_xmit function in net/ipv4 and net/ipv6. Minor changes: - convert dev_kfree_skb to kfree_skb on error path, as dev_kfree_skb calls consume_skb which is not for error paths. - use pskb_network_may_pull even though that is pedantic here, as the same as pskb_may_pull for devices without llheaders. - do not cache ipv6 hdrs if used only once (unsafe across pskb_may_pull, was more relevant to earlier patch) Reported-by: syzbot <[email protected]> Signed-off-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-01tap: call skb_probe_transport_header after setting skb->devWillem de Bruijn1-2/+1
The BPF flow dissector expects either skb->sk or skb->dev set on all skbs. Delay flow dissection until after skb->dev is set. This requires calling from within an rcu read-side critical section. That is fine, see also the call from tun_xdp_one. Fixes: d0e13a1488ad ("flow_dissector: lookup netns by skb->sk if skb->dev is NULL") Reported-by: Christian Borntraeger <[email protected]> Signed-off-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-01ptr_ring: wrap back ->producer in __ptr_ring_swap_queue()Cong Wang1-0/+2
__ptr_ring_swap_queue() tries to move pointers from the old ring to the new one, but it forgets to check if ->producer is beyond the new size at the end of the operation. This leads to an out-of-bound access in __ptr_ring_produce() as reported by syzbot. Reported-by: [email protected] Fixes: 5d49de532002 ("ptr_ring: resize support") Cc: "Michael S. Tsirkin" <[email protected]> Cc: John Fastabend <[email protected]> Cc: Jason Wang <[email protected]> Signed-off-by: Cong Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-01ALSA: hda - Revert DSP detection on legacy HD-audio driverTakashi Iwai4-116/+8
This essentially reverts the commits c337104b1a16 ("ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected") and d82b51c855a2 ("ALSA: HD-Audio: SKL+: force HDaudio legacy or SKL+ driver selection") for the path of legacy HD-audio controller (snd-hda-intel). The automatic DSP detection and skip of binding with the legacy driver caused regressions on several machines like Dell XPS13. They give the PCI class 0x40380 indicating the availability of DSP while they don't work with ASoC SKL driver (yet). As the support of ASoC driver for such devices isn't available, it's better to revert the whole DSP-detection-and-skip behavior of the legacy driver, so that we can get the old good driver working on such devices. The pci_binding option for ASoC SKL driver is still kept so that it can work without blacklisting. Fixes: c337104b1a16 ("ALSA: HD-Audio: SKL+: abort probe if DSP is present and Skylake driver selected") Reported-by: Linus Torvalds <[email protected]> Reported-by: Hans de Goede <[email protected]> Reported-by: Azat Khuzhin <[email protected]> Cc: Pierre-Louis Bossart <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-01-01net: rds: remove unnecessary NULL checkZhu Yanjun1-1/+1
In kfree, the NULL check is done. Signed-off-by: Zhu Yanjun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-01add document for TCP OFO, PAWS and skip ACK countersyupeng1-1/+239
add document and examples for below counters: TcpExtTCPOFOQueue TcpExtTCPOFODrop TcpExtTCPOFOMerge TcpExtPAWSActive TcpExtPAWSEstab TcpExtTCPACKSkippedSynRecv TcpExtTCPACKSkippedPAWS TcpExtTCPACKSkippedSeq TcpExtTCPACKSkippedFinWait2 TcpExtTCPACKSkippedTimeWait TcpExtTCPACKSkippedChallenge Signed-off-by: yupeng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-01sock: Make sock->sk_stamp thread-safeDeepa Dinamani4-15/+55
Al Viro mentioned (Message-ID <[email protected]>) that there is probably a race condition lurking in accesses of sk_stamp on 32-bit machines. sock->sk_stamp is of type ktime_t which is always an s64. On a 32 bit architecture, we might run into situations of unsafe access as the access to the field becomes non atomic. Use seqlocks for synchronization. This allows us to avoid using spinlocks for readers as readers do not need mutual exclusion. Another approach to solve this is to require sk_lock for all modifications of the timestamps. The current approach allows for timestamps to have their own lock: sk_stamp_lock. This allows for the patch to not compete with already existing critical sections, and side effects are limited to the paths in the patch. The addition of the new field maintains the data locality optimizations from commit 9115e8cd2a0c ("net: reorganize struct sock for better data locality") Note that all the instances of the sk_stamp accesses are either through the ioctl or the syscall recvmsg. Signed-off-by: Deepa Dinamani <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-01-01selftests/bpf: fix error printing in test_devmap()Xiaozhou Liu1-1/+1
As a simple fix, just print the correct map type. Signed-off-by: Xiaozhou Liu <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-01-01ALSA: hda/tegra: clear pending irq handlersSameer Pujar1-0/+2
Even after disabling interrupts on the module, it could be possible that irq handlers are still running. System hang is seen during suspend path. It was found that, there were pending writes on the HDA bus and clock was disabled by that time. Above mentioned issue is fixed by clearing any pending irq handlers before disabling clocks and returning from hda suspend. Suggested-by: Mohan Kumar <[email protected]> Suggested-by: Dara Ramesh <[email protected]> Signed-off-by: Sameer Pujar <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2019-01-01ALSA: hda/realtek: Enable the headset mic auto detection for ASUS laptopsJian-Hong Pan1-1/+1
The headset mic of ASUS laptops like UX533FD, UX433FN and UX333FA, whose CODEC is Realtek ALC294 has jack auto detection feature. This patch enables the feature. Fixes: 4e051106730d ("ALSA: hda/realtek: Enable audio jacks of ASUS UX533FD with ALC294") Signed-off-by: Daniel Drake <[email protected]> Signed-off-by: Jian-Hong Pan <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-12-31ext4: fix special inode number checks in __ext4_iget()Theodore Ts'o1-1/+1
The check for special (reserved) inode number checks in __ext4_iget() was broken by commit 8a363970d1dc: ("ext4: avoid declaring fs inconsistent due to invalid file handles"). This was caused by a botched reversal of the sense of the flag now known as EXT4_IGET_SPECIAL (when it was previously named EXT4_IGET_NORMAL). Fix the logic appropriately. Fixes: 8a363970d1dc ("ext4: avoid declaring fs inconsistent...") Signed-off-by: Theodore Ts'o <[email protected]> Reported-by: Dan Carpenter <[email protected]> Cc: [email protected]
2018-12-31Merge tag 'armsoc-defconfig' of ↵Linus Torvalds7-76/+105
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC defconfig updates from Olof Johansson: "Most changes here are to enable new drivers and platforms in the various configs that affect them. Most of these have been covered and described in the other branches, we mostly keep defconfig separate to avoid conflicts between SoC/dt/driver updates that they otherwise would be grouped with. One thing worth mentioning here is that OMAP changes from using their own UART driver, to 8250, for the multi_v7_defconfig shared config on 32-bit. This means that the console is now named ttyS* instead of ttyO*. This change was already done for omap2_defconfig a while back, so most users of these configs have either already updated, or can easily follow the same patterns as they did at that time. This makes platform support slightly easier for distros, since they no longer need to keep track of a separate console prefix for these platforms" * tag 'armsoc-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) Revert "arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO" arm64: defconfig: Enable FSL_MC_BUS and FSL_MC_DPIO arm64: defconfig: Replace PINCTRL_MT7622 with PINCTRL_MTK_MOORE arm64: defconfig: Regenerate for v4.20 ARM: multi_v7_defconfig: Add TOSHIBA TC358764 bridge driver ARM: multi_v7_defconfig: Add MAX8952 regulator driver ARM: exynos_defconfig: Add TOSHIBA TC358764 bridge driver ARM: exynos_defconfig: Add MAX8952 regulator driver ARM: exynos_defconfig: Add MAX8998 RTC and charger drivers ARM: imx_v6_v7_defconfig: add imx7ulp support ARM: imx_v6_v7_defconfig: Select TOUCHSCREEN_GOODIX ARM: multi_v7_defconfig: enable STM32 analog & timer drivers arm64: defconfig: Enable GCC and PINCTRL for MSM8998 arm64: defconfig: Enable core Qualcomm SDM845 options ARM: defconfig: Enable the PL111 DRM driver on vexpress ARM: defconfig: Update the vexpress defconfig arm64: defconfig: Enable some qcom remoteproc configs arm64: defconfig: Enable QCS404 configs ARM: imx_v6_v7_defconfig: Enable USB_ANNOUNCE_NEW_DEVICES ARM: imx_v6_v7_defconfig: Enable BT_BNEP ...
Powered by cgit, Gruvboxed by Blaster4385.