aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-04-06bpf: Adjust bpf_tcp_check_syncookie selftest to test dual-stack socketsMaxim Mikityanskiy1-19/+59
The previous commit fixed support for dual-stack sockets in bpf_tcp_check_syncookie. This commit adjusts the selftest to verify the fixed functionality. Signed-off-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Acked-by: Arthur Fabre <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-06bpf: Support dual-stack sockets in bpf_tcp_check_syncookieMaxim Mikityanskiy1-4/+13
bpf_tcp_gen_syncookie looks at the IP version in the IP header and validates the address family of the socket. It supports IPv4 packets in AF_INET6 dual-stack sockets. On the other hand, bpf_tcp_check_syncookie looks only at the address family of the socket, ignoring the real IP version in headers, and validates only the packet size. This implementation has some drawbacks: 1. Packets are not validated properly, allowing a BPF program to trick bpf_tcp_check_syncookie into handling an IPv6 packet on an IPv4 socket. 2. Dual-stack sockets fail the checks on IPv4 packets. IPv4 clients end up receiving a SYNACK with the cookie, but the following ACK gets dropped. This patch fixes these issues by changing the checks in bpf_tcp_check_syncookie to match the ones in bpf_tcp_gen_syncookie. IP version from the header is taken into account, and it is validated properly with address family. Fixes: 399040847084 ("bpf: add helper to check for a valid SYN cookie") Signed-off-by: Maxim Mikityanskiy <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Acked-by: Arthur Fabre <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-04-06drm/amdgpu/smu10: fix SoC/fclk units in auto modeAlex Deucher1-4/+4
SMU takes clock limits in Mhz units. socclk and fclk were using 10 khz units in some cases. Switch to Mhz units. Fixes higher than required SoC clocks. Fixes: 97cf32996c46d9 ("drm/amd/pm: Removed fixed clock in auto mode DPM") Reviewed-by: Paul Menzel <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-06drm/amd/display: update dcn315 clock table readDmytro Laktyushkin1-40/+67
[Why & How] Make dcn315 base its clock table off dcfclk rather than fclk. This change also adds some sanity checking to make sure an empty pmfw table does not result in invalid dal clocks. Reviewed-by: Charlene Liu <[email protected]> Acked-by: Qingqing Zhuo <[email protected]> Signed-off-by: Dmytro Laktyushkin <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-06drm/amdgpu/display: change pipe policy for DCN 2.1Benjamin Marty1-1/+1
Fixes crash on MST Hub disconnect. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1849 Fixes: ee2698cf79cc ("drm/amd/display: Changed pipe split policy to allow for multi-display pipe split") Signed-off-by: Benjamin Marty <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-06drm/amd/display: Add configuration options for AUX wake work around.Jimmy Kizito2-1/+24
[Why] Work around to try to wake unresponsive DP sinks may need to be adjusted for certain sinks. [How] Add options to disable work around or adjust time spent trying to wake unresponsive DPRX. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Martin Leung <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Jimmy Kizito <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-06drm/amd/display: remove assert for odm transition caseEric Bernstein1-1/+0
Remove assert that will hit during odm transition case, since this is a valid case. Tested-by: Daniel Wheeler <[email protected]> Reviewed-by: Alvin Lee <[email protected]> Acked-by: Tom Chung <[email protected]> Signed-off-by: Eric Bernstein <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-06drm/amdgpu: don't use BACO for reset in S3Alex Deucher1-0/+11
Seems to cause a reboots or hangs on some systems. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1924 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1953 Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)") Reviewed-by: Lijo Lazar <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-06drm/amd/display: Fix by adding FPU protection for dcn30_internal_validate_bwCHANDAN VURDIGERE NATARAJ1-0/+2
[Why] Below general protection fault observed when WebGL Aquarium is run for longer duration. If drm debug logs are enabled and set to 0x1f then the issue is observed within 10 minutes of run. [ 100.717056] general protection fault, probably for non-canonical address 0x2d33302d32323032: 0000 [#1] PREEMPT SMP NOPTI [ 100.727921] CPU: 3 PID: 1906 Comm: DrmThread Tainted: G W 5.15.30 #12 d726c6a2d6ebe5cf9223931cbca6892f916fe18b [ 100.754419] RIP: 0010:CalculateSwathWidth+0x1f7/0x44f [ 100.767109] Code: 00 00 00 f2 42 0f 11 04 f0 48 8b 85 88 00 00 00 f2 42 0f 10 04 f0 48 8b 85 98 00 00 00 f2 42 0f 11 04 f0 48 8b 45 10 0f 57 c0 <f3> 42 0f 2a 04 b0 0f 57 c9 f3 43 0f 2a 0c b4 e8 8c e2 f3 ff 48 8b [ 100.781269] RSP: 0018:ffffa9230079eeb0 EFLAGS: 00010246 [ 100.812528] RAX: 2d33302d32323032 RBX: 0000000000000500 RCX: 0000000000000000 [ 100.819656] RDX: 0000000000000001 RSI: ffff99deb712c49c RDI: 0000000000000000 [ 100.826781] RBP: ffffa9230079ef50 R08: ffff99deb712460c R09: ffff99deb712462c [ 100.833907] R10: ffff99deb7124940 R11: ffff99deb7124d70 R12: ffff99deb712ae44 [ 100.841033] R13: 0000000000000001 R14: 0000000000000000 R15: ffffa9230079f0a0 [ 100.848159] FS: 00007af121212640(0000) GS:ffff99deba780000(0000) knlGS:0000000000000000 [ 100.856240] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 100.861980] CR2: 0000209000fe1000 CR3: 000000011b18c000 CR4: 0000000000350ee0 [ 100.869106] Call Trace: [ 100.871555] <TASK> [ 100.873655] ? asm_sysvec_reschedule_ipi+0x12/0x20 [ 100.878449] CalculateSwathAndDETConfiguration+0x1a3/0x6dd [ 100.883937] dml31_ModeSupportAndSystemConfigurationFull+0x2ce4/0x76da [ 100.890467] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.895173] ? kallsyms_lookup_buildid+0xc8/0x163 [ 100.899874] ? __sprint_symbol+0x80/0x135 [ 100.903883] ? dm_update_plane_state+0x3f9/0x4d2 [ 100.908500] ? symbol_string+0xb7/0xde [ 100.912250] ? number+0x145/0x29b [ 100.915566] ? vsnprintf+0x341/0x5ff [ 100.919141] ? desc_read_finalized_seq+0x39/0x87 [ 100.923755] ? update_load_avg+0x1b9/0x607 [ 100.927849] ? compute_mst_dsc_configs_for_state+0x7d/0xd5b [ 100.933416] ? fetch_pipe_params+0xa4d/0xd0c [ 100.937686] ? dc_fpu_end+0x3d/0xa8 [ 100.941175] dml_get_voltage_level+0x16b/0x180 [ 100.945619] dcn30_internal_validate_bw+0x10e/0x89b [ 100.950495] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.955285] ? resource_build_scaling_params+0x98b/0xb8c [ 100.960595] ? dcn31_validate_bandwidth+0x68/0x1fc [ 100.965384] dcn31_validate_bandwidth+0x9a/0x1fc [ 100.970001] dc_validate_global_state+0x238/0x295 [ 100.974703] amdgpu_dm_atomic_check+0x9c1/0xbce [ 100.979235] ? _printk+0x59/0x73 [ 100.982467] drm_atomic_check_only+0x403/0x78b [ 100.986912] drm_mode_atomic_ioctl+0x49b/0x546 [ 100.991358] ? drm_ioctl+0x1c1/0x3b3 [ 100.994936] ? drm_atomic_set_property+0x92a/0x92a [ 100.999725] drm_ioctl_kernel+0xdc/0x149 [ 101.003648] drm_ioctl+0x27f/0x3b3 [ 101.007051] ? drm_atomic_set_property+0x92a/0x92a [ 101.011842] amdgpu_drm_ioctl+0x49/0x7d [ 101.015679] __se_sys_ioctl+0x7c/0xb8 [ 101.015685] do_syscall_64+0x5f/0xb8 [ 101.015690] ? __irq_exit_rcu+0x34/0x96 [How] It calles populate_dml_pipes which uses doubles to initialize. Adding FPU protection avoids context switch and probable loss of vba context as there is potential contention while drm debug logs are enabled. Signed-off-by: CHANDAN VURDIGERE NATARAJ <[email protected]> Reviewed-by: Rodrigo Siqueira <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-06drm/amdkfd: Create file descriptor after client is added to smi_clients listLee Jones1-9/+15
This ensures userspace cannot prematurely clean-up the client before it is fully initialised which has been proven to cause issues in the past. Cc: Felix Kuehling <[email protected]> Cc: Alex Deucher <[email protected]> Cc: "Christian König" <[email protected]> Cc: "Pan, Xinhui" <[email protected]> Cc: David Airlie <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Lee Jones <[email protected]> Reviewed-by: Felix Kuehling <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-06drm/amdgpu: Sync up header and implementation to use the same parameter namesMa Jun1-2/+2
Sync up header and implementation to use the same parameter names in function amdgpu_ring_init. ring_size -> max_dw, prio -> hw_prio Reviewed-by: Guchun Chen <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Ma Jun <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-06drm/amdgpu: fix incorrect GCR_GENERAL_CNTL addressRuili Ji1-3/+3
gfx10.3.3/gfx10.3.6/gfx10.3.7 shall use 0x1580 address for GCR_GENERAL_CNTL Acked-by: Prike Liang <[email protected]> Acked-by: Yifan Zhang <[email protected]> Reviewed-by: Aaron Liu <[email protected]> Signed-off-by: Ruili Ji <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-06amd/display: set backlight only if requiredShirish S2-3/+10
[Why] comparing pwm bl values (coverted) with user brightness(converted) levels in commit_tail leads to continuous setting of backlight via dmub as they don't to match. This leads overdrive in queuing of commands to DMCU that sometimes lead to depending on load on DMCU fw: "[drm:dc_dmub_srv_wait_idle] *ERROR* Error waiting for DMUB idle: status=3" [How] Store last successfully set backlight value and compare with it instead of pwm reads which is not what we should compare with. Signed-off-by: Shirish S <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-06drm/amd/display: Fix allocate_mst_payload assert on resumeRoman Li1-1/+2
[Why] On resume we do link detection for all non-MST connectors. MST is handled separately. However the condition for telling if connector is on mst branch is not enough for mst hub case. Link detection for mst branch link leads to mst topology reset. That causes assert in dc_link_allocate_mst_payload() [How] Use link type as indicator for mst link. Reviewed-by: Wayne Lin <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-06drm/amd/display: Revert FEC check in validationMartin Leung1-4/+0
why and how: causes failure on install on certain machines Reviewed-by: George Shen <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Martin Leung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-06drm/amd/display: Add work around for AUX failure on wake.Jimmy Kizito2-0/+60
[Why] When waking from low-power states, a DP sink may remain unresponsive to AUX transactions. [How] Try to toggle DPCD SET_POWER register repeatedly (up to a maximum timeout value) until DP sink becomes responsive. Reviewed-by: Mustapha Ghaddar <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Jimmy Kizito <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-06drm/amd/display: Clear optc false state when disable otgCharlene Liu2-8/+11
[why] when disable optc, need to clear the underflow status as well. Reviewed-by: Chris Park <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-06drm/amd/display: Enable power gating before init_pipesRoman Li3-6/+9
[Why] In init_hw() we call init_pipes() before enabling power gating. init_pipes() tries to power gate dsc but it may fail because required force-ons are not released yet. As a result with dsc config the following errors observed on resume: "REG_WAIT timeout 1us * 1000 tries - dcn20_dsc_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_dpp_pg_control" "REG_WAIT timeout 1us * 1000 tries - dcn20_hubp_pg_control" [How] Move enable_power_gating_plane() before init_pipes() in init_hw() Reviewed-by: Anthony Koo <[email protected]> Reviewed-by: Eric Yang <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-06drm/amd/display: Remove redundant dsc power gating from init_hwRoman Li1-7/+0
[Why] DSC Power down code has been moved from dcn31_init_hw into init_pipes() Need to remove it from dcn10_init_hw() as well to avoid duplicated action on dcn1.x/2.x [How] Remove DSC power down code from dcn10_init_hw() Fixes: 8fa6f4c5715c ("drm/amd/display: fixed the DSC power off sequence during Driver PnP") Reviewed-by: Anthony Koo <[email protected]> Reviewed-by: Eric Yang <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Roman Li <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-06drm/amd/display: Correct Slice reset calculationChris Park1-2/+2
[Why] Once DSC slice cannot fit pixel clock, we incorrectly reset min slices to 0 and allow max slice to operate, even when max slice itself cannot fit the pixel clock properly. [How] Change the sequence such that we correctly determine DSC is not possible when both min slices and max slices cannot fit pixel clock per slice. Reviewed-by: Wenjing Liu <[email protected]> Acked-by: Alex Hung <[email protected]> Signed-off-by: Chris Park <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-06drm/amd/vcn: fix an error msg on vcn 3.0tiancyin1-1/+1
Some video card has more than one vcn instance, passing 0 to vcn_v3_0_pause_dpg_mode is incorrect. Error msg: Register(1) [mmUVD_POWER_STATUS] failed to reach value 0x00000001 != 0x00000002 Reviewed-by: James Zhu <[email protected]> Signed-off-by: tiancyin <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-06drm/amdgpu/vcn3: send smu interface typeBoyuan Zhang2-0/+12
For VCN FW to detect ASIC type, in order to use different mailbox registers. V2: simplify codes and fix format issue. Signed-off-by: Boyuan Zhang <[email protected]> Acked-by Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-06spi: bcm-qspi: fix MSPI only access with bcm_qspi_exec_mem_op()Kamal Dasu1-2/+2
This fixes case where MSPI controller is used to access spi-nor flash and BSPI block is not present. Fixes: 5f195ee7d830 ("spi: bcm-qspi: Implement the spi_mem interface") Signed-off-by: Kamal Dasu <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-04-06spi: cadence-quadspi: fix protocol setup for non-1-1-X operationsMatthias Schiffer1-34/+12
cqspi_set_protocol() only set the data width, but ignored the command and address width (except for 8-8-8 DTR ops), leading to corruption of all transfers using 1-X-X or X-X-X ops. Fix by setting the other two widths as well. While we're at it, simplify the code a bit by replacing the CQSPI_INST_TYPE_* constants with ilog2(). Tested on a TI AM64x with a Macronix MX25U51245G QSPI flash with 1-4-4 read and write operations. Signed-off-by: Matthias Schiffer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-04-06spi: core: add dma_map_dev for __spi_unmap_msg()Vinod Koul1-0/+4
Commit b470e10eb43f ("spi: core: add dma_map_dev for dma device") added dma_map_dev for _spi_map_msg() but missed to add for unmap routine, __spi_unmap_msg(), so add it now. Fixes: b470e10eb43f ("spi: core: add dma_map_dev for dma device") Cc: [email protected] # v5.14+ Signed-off-by: Vinod Koul <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-04-06cdrom: remove unused variableEnze Li1-2/+1
The clang static analyzer reports the following warning, File: drivers/cdrom/cdrom.c Warning: line 1380, column 7 Although the value stored to 'status' is used in enclosing expression, the value is never actually read from 'status' Remove the unused variable to eliminate the warning. Signed-off-by: Enze Li <[email protected]> Link: https://lore.kernel.org/all/[email protected] Signed-off-by: Phillip Potter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-04-06myri10ge: fix an incorrect free for skb in myri10ge_sw_tsoXiaomeng Tong1-4/+2
All remaining skbs should be released when myri10ge_xmit fails to transmit a packet. Fix it within another skb_list_walk_safe. Signed-off-by: Xiaomeng Tong <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-06net: usb: aqc111: Fix out-of-bounds accesses in RX fixupMarcin Kozlowski1-2/+7
aqc111_rx_fixup() contains several out-of-bounds accesses that can be triggered by a malicious (or defective) USB device, in particular: - The metadata array (desc_offset..desc_offset+2*pkt_count) can be out of bounds, causing OOB reads and (on big-endian systems) OOB endianness flips. - A packet can overlap the metadata array, causing a later OOB endianness flip to corrupt data used by a cloned SKB that has already been handed off into the network stack. - A packet SKB can be constructed whose tail is far beyond its end, causing out-of-bounds heap data to be considered part of the SKB's data. Found doing variant analysis. Tested it with another driver (ax88179_178a), since I don't have a aqc111 device to test it, but the code looks very similar. Signed-off-by: Marcin Kozlowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-06qede: confirm skb is allocated before usingJamie Bainbridge1-0/+3
qede_build_skb() assumes build_skb() always works and goes straight to skb_reserve(). However, build_skb() can fail under memory pressure. This results in a kernel panic because the skb to reserve is NULL. Add a check in case build_skb() failed to allocate and return NULL. The NULL return is handled correctly in callers to qede_build_skb(). Fixes: 8a8633978b842 ("qede: Add build_skb() support.") Signed-off-by: Jamie Bainbridge <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-06net: ipv6mr: fix unused variable warning with CONFIG_IPV6_PIMSM_V2=nFlorian Westphal1-1/+1
net/ipv6/ip6mr.c:1656:14: warning: unused variable 'do_wrmifwhole' Move it to the CONFIG_IPV6_PIMSM_V2 scope where its used. Fixes: 4b340a5a726d ("net: ip6mr: add support for passing full packet on wrong mif") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-06Merge branch '100GbE' of ↵David S. Miller3-5/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2022-04-05 Maciej Fijalkowski says: We were solving issues around AF_XDP busy poll's not-so-usual scenarios, such as very big busy poll budgets applied to very small HW rings. This set carries the things that were found during that work that apply to net tree. One thing that was fixed for all in-tree ZC drivers was missing on ice side all the time - it's about syncing RCU before destroying XDP resources. Next one fixes the bit that is checked in ice_xsk_wakeup and third one avoids false setting of DD bits on Tx descriptors. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-04-06Drivers: hv: vmbus: Replace smp_store_mb() with virt_store_mb()Andrea Parri (Microsoft)1-3/+3
Following the recommendation in Documentation/memory-barriers.txt for virtual machine guests. Fixes: 8b6a877c060ed ("Drivers: hv: vmbus: Replace the per-CPU channel lists with a global array of channels") Signed-off-by: Andrea Parri (Microsoft) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2022-04-06Drivers: hv: balloon: Disable balloon and hot-add accordinglyBoqun Feng1-2/+34
Currently there are known potential issues for balloon and hot-add on ARM64: * Unballoon requests from Hyper-V should only unballoon ranges that are guest page size aligned, otherwise guests cannot handle because it's impossible to partially free a page. This is a problem when guest page size > 4096 bytes. * Memory hot-add requests from Hyper-V should provide the NUMA node id of the added ranges or ARM64 should have a functional memory_add_physaddr_to_nid(), otherwise the node id is missing for add_memory(). These issues require discussions on design and implementation. In the meanwhile, post_status() is working and essential to guest monitoring. Therefore instead of disabling the entire hv_balloon driver, the ballooning (when page size > 4096 bytes) and hot-add are disabled accordingly for now. Once the issues are fixed, they can be re-enable in these cases. Signed-off-by: Boqun Feng <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2022-04-06Drivers: hv: balloon: Support status report for larger page sizesBoqun Feng1-3/+10
DM_STATUS_REPORT expects the numbers of pages in the unit of 4k pages (HV_HYP_PAGE) instead of guest pages, so to make it work when guest page sizes are larger than 4k, convert the numbers of guest pages into the numbers of HV_HYP_PAGEs. Note that the numbers of guest pages are still used for tracing because tracing is internal to the guest kernel. Reported-by: Vitaly Kuznetsov <[email protected]> Signed-off-by: Boqun Feng <[email protected]> Reviewed-by: Michael Kelley <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wei Liu <[email protected]>
2022-04-06random: check for signal_pending() outside of need_resched() checkJann Horn1-2/+2
signal_pending() checks TIF_NOTIFY_SIGNAL and TIF_SIGPENDING, which signal that the task should bail out of the syscall when possible. This is a separate concept from need_resched(), which checks TIF_NEED_RESCHED, signaling that the task should preempt. In particular, with the current code, the signal_pending() bailout probably won't work reliably. Change this to look like other functions that read lots of data, such as read_zero(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Jann Horn <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]>
2022-04-06random: do not allow user to keep crng key around on stackJason A. Donenfeld1-12/+23
The fast key erasure RNG design relies on the key that's used to be used and then discarded. We do this, making judicious use of memzero_explicit(). However, reads to /dev/urandom and calls to getrandom() involve a copy_to_user(), and userspace can use FUSE or userfaultfd, or make a massive call, dynamically remap memory addresses as it goes, and set the process priority to idle, in order to keep a kernel stack alive indefinitely. By probing /proc/sys/kernel/random/entropy_avail to learn when the crng key is refreshed, a malicious userspace could mount this attack every 5 minutes thereafter, breaking the crng's forward secrecy. In order to fix this, we just overwrite the stack's key with the first 32 bytes of the "free" fast key erasure output. If we're returning <= 32 bytes to the user, then we can still return those bytes directly, so that short reads don't become slower. And for long reads, the difference is hopefully lost in the amortization, so it doesn't change much, with that amortization helping variously for medium reads. We don't need to do this for get_random_bytes() and the various kernel-space callers, and later, if we ever switch to always batching, this won't be necessary either, so there's no need to change the API of these functions. Cc: Theodore Ts'o <[email protected]> Reviewed-by: Jann Horn <[email protected]> Fixes: c92e040d575a ("random: add backtracking protection to the CRNG") Fixes: 186873c549df ("random: use simpler fast key erasure flow on per-cpu keys") Signed-off-by: Jason A. Donenfeld <[email protected]>
2022-04-06net: phy: mscc-miim: reject clause 45 register accessesMichael Walle1-0/+6
The driver doesn't support clause 45 register access yet, but doesn't check if the access is a c45 one either. This leads to spurious register reads and writes. Add the check. Fixes: 542671fe4d86 ("net: phy: mscc-miim: Add MDIO driver") Signed-off-by: Michael Walle <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-06Merge branch 'axienet-broken-link'David S. Miller4-18/+31
Andy Chiu says: ==================== Fix broken link on Xilinx's AXI Ethernet in SGMII mode The Ethernet driver use phy-handle to reference the PCS/PMA PHY. This could be a problem if one wants to configure an external PHY via phylink, since it use the same phandle to get the PHY. To fix this, introduce a dedicated pcs-handle to point to the PCS/PMA PHY and deprecate the use of pointing it with phy-handle. A similar use case of pcs-handle can be seen on dpaa2 as well. --- patch v5 --- - Re-apply the v4 patch on the net tree. - Describe the pcs-handle DT binding at ethernet-controller level. --- patch v6 --- - Remove "preferrably" to clearify usage of pcs_handle. --- patch v7 --- - Rebase the patch on latest net/master --- patch v8 --- - Rebase the patch on net-next/master - Add "reviewed-by" tag in PATCH 3/4: dt-bindings: net: add pcs-handle attribute - Remove "fix" tag in last commit message since this is not a critical bug and will not be back ported to stable. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-04-06net: axiemac: use a phandle to reference pcs_phyAndy Chiu1-2/+9
In some SGMII use cases where both a fixed link external PHY and the internal PCS/PMA PHY need to be configured, we should explicitly use a phandle "pcs-phy" to get the reference to the PCS/PMA PHY. Otherwise, the driver would use "phy-handle" in the DT as the reference to both the external and the internal PCS/PMA PHY. In other cases where the core is connected to a SFP cage, we could still point phy-handle to the intenal PCS/PMA PHY, and let the driver connect to the SFP module, if exist, via phylink. Signed-off-by: Andy Chiu <[email protected]> Reviewed-by: Greentime Hu <[email protected]> Reviewed-by: Robert Hancock <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-06dt-bindings: net: add pcs-handle attributeAndy Chiu2-1/+13
Document the new pcs-handle attribute to support connecting to an external PHY. For Xilinx's AXI Ethernet, this is used when the core operates in SGMII or 1000Base-X modes and links through the internal PCS/PMA PHY. Signed-off-by: Andy Chiu <[email protected]> Reviewed-by: Greentime Hu <[email protected]> Reviewed-by: Rob Herring <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-06net: axienet: factor out phy_node in struct axienet_localAndy Chiu2-10/+5
the struct member `phy_node` of struct axienet_local is not used by the driver anymore after initialization. It might be a remnent of old code and could be removed. Signed-off-by: Andy Chiu <[email protected]> Reviewed-by: Greentime Hu <[email protected]> Reviewed-by: Robert Hancock <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-06net: axienet: setup mdio unconditionallyAndy Chiu1-7/+6
The call to axienet_mdio_setup should not depend on whether "phy-node" pressents on the DT. Besides, since `lp->phy_node` is used if PHY is in SGMII or 100Base-X modes, move it into the if statement. And the next patch will remove `lp->phy_node` from driver's private structure and do an of_node_put on it right away after use since it is not used elsewhere. Signed-off-by: Andy Chiu <[email protected]> Reviewed-by: Greentime Hu <[email protected]> Reviewed-by: Robert Hancock <[email protected]> Reviewed-by: Radhey Shyam Pandey <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-06net: sfc: fix using uninitialized xdp tx_queueTaehee Yoo3-1/+6
In some cases, xdp tx_queue can get used before initialization. 1. interface up/down 2. ring buffer size change When CPU cores are lower than maximum number of channels of sfc driver, it creates new channels only for XDP. When an interface is up or ring buffer size is changed, all channels are initialized. But xdp channels are always initialized later. So, the below scenario is possible. Packets are received to rx queue of normal channels and it is acted XDP_TX and tx_queue of xdp channels get used. But these tx_queues are not initialized yet. If so, TX DMA or queue error occurs. In order to avoid this problem. 1. initializes xdp tx_queues earlier than other rx_queue in efx_start_channels(). 2. checks whether tx_queue is initialized or not in efx_xdp_tx_buffers(). Splat looks like: sfc 0000:08:00.1 enp8s0f1np1: TX queue 10 spurious TX completion id 250 sfc 0000:08:00.1 enp8s0f1np1: resetting (RECOVER_OR_ALL) sfc 0000:08:00.1 enp8s0f1np1: MC command 0x80 inlen 100 failed rc=-22 (raw=22) arg=789 sfc 0000:08:00.1 enp8s0f1np1: has been disabled Fixes: f28100cb9c96 ("sfc: fix lack of XDP TX queues - error XDP TX failed (-22)") Acked-by: Martin Habets <[email protected]> Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-06rxrpc: fix a race in rxrpc_exit_net()Eric Dumazet1-1/+1
Current code can lead to the following race: CPU0 CPU1 rxrpc_exit_net() rxrpc_peer_keepalive_worker() if (rxnet->live) rxnet->live = false; del_timer_sync(&rxnet->peer_keepalive_timer); timer_reduce(&rxnet->peer_keepalive_timer, jiffies + delay); cancel_work_sync(&rxnet->peer_keepalive_work); rxrpc_exit_net() exits while peer_keepalive_timer is still armed, leading to use-after-free. syzbot report was: ODEBUG: free active (active state 0) object type: timer_list hint: rxrpc_peer_keepalive_timeout+0x0/0xb0 WARNING: CPU: 0 PID: 3660 at lib/debugobjects.c:505 debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Modules linked in: CPU: 0 PID: 3660 Comm: kworker/u4:6 Not tainted 5.17.0-syzkaller-13993-g88e6c0207623 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: netns cleanup_net RIP: 0010:debug_print_object+0x16e/0x250 lib/debugobjects.c:505 Code: ff df 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 af 00 00 00 48 8b 14 dd 00 1c 26 8a 4c 89 ee 48 c7 c7 00 10 26 8a e8 b1 e7 28 05 <0f> 0b 83 05 15 eb c5 09 01 48 83 c4 18 5b 5d 41 5c 41 5d 41 5e c3 RSP: 0018:ffffc9000353fb00 EFLAGS: 00010082 RAX: 0000000000000000 RBX: 0000000000000003 RCX: 0000000000000000 RDX: ffff888029196140 RSI: ffffffff815efad8 RDI: fffff520006a7f52 RBP: 0000000000000001 R08: 0000000000000000 R09: 0000000000000000 R10: ffffffff815ea4ae R11: 0000000000000000 R12: ffffffff89ce23e0 R13: ffffffff8a2614e0 R14: ffffffff816628c0 R15: dffffc0000000000 FS: 0000000000000000(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe1f2908924 CR3: 0000000043720000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __debug_check_no_obj_freed lib/debugobjects.c:992 [inline] debug_check_no_obj_freed+0x301/0x420 lib/debugobjects.c:1023 kfree+0xd6/0x310 mm/slab.c:3809 ops_free_list.part.0+0x119/0x370 net/core/net_namespace.c:176 ops_free_list net/core/net_namespace.c:174 [inline] cleanup_net+0x591/0xb00 net/core/net_namespace.c:598 process_one_work+0x996/0x1610 kernel/workqueue.c:2289 worker_thread+0x665/0x1080 kernel/workqueue.c:2436 kthread+0x2e9/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:298 </TASK> Fixes: ace45bec6d77 ("rxrpc: Fix firewall route keepalive") Signed-off-by: Eric Dumazet <[email protected]> Cc: David Howells <[email protected]> Cc: Marc Dionne <[email protected]> Cc: [email protected] Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-06net: openvswitch: fix leak of nested actionsIlya Maximets1-5/+90
While parsing user-provided actions, openvswitch module may dynamically allocate memory and store pointers in the internal copy of the actions. So this memory has to be freed while destroying the actions. Currently there are only two such actions: ct() and set(). However, there are many actions that can hold nested lists of actions and ovs_nla_free_flow_actions() just jumps over them leaking the memory. For example, removal of the flow with the following actions will lead to a leak of the memory allocated by nf_ct_tmpl_alloc(): actions:clone(ct(commit),0) Non-freed set() action may also leak the 'dst' structure for the tunnel info including device references. Under certain conditions with a high rate of flow rotation that may cause significant memory leak problem (2MB per second in reporter's case). The problem is also hard to mitigate, because the user doesn't have direct control over the datapath flows generated by OVS. Fix that by iterating over all the nested actions and freeing everything that needs to be freed recursively. New build time assertion should protect us from this problem if new actions will be added in the future. Unfortunately, openvswitch module doesn't use NLA_F_NESTED, so all attributes has to be explicitly checked. sample() and clone() actions are mixing extra attributes into the user-provided action list. That prevents some code generalization too. Fixes: 34ae932a4036 ("openvswitch: Make tunnel set action attach a metadata dst") Link: https://mail.openvswitch.org/pipermail/ovs-dev/2022-March/392922.html Reported-by: Stéphane Graber <[email protected]> Signed-off-by: Ilya Maximets <[email protected]> Acked-by: Aaron Conole <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-06tlb: hugetlb: Add more sizes to tlb_remove_huge_tlb_entrySteve Capper1-3/+7
tlb_remove_huge_tlb_entry only considers PMD_SIZE and PUD_SIZE when updating the mmu_gather structure. Unfortunately on arm64 there are two additional huge page sizes that need to be covered: CONT_PTE_SIZE and CONT_PMD_SIZE. Where an end-user attempts to employ contiguous huge pages, a VM_BUG_ON can be experienced due to the fact that the tlb structure hasn't been correctly updated by the relevant tlb_flush_p.._range() call from tlb_remove_huge_tlb_entry. This patch adds inequality logic to the generic implementation of tlb_remove_huge_tlb_entry s.t. CONT_PTE_SIZE and CONT_PMD_SIZE are effectively covered on arm64. Also, as well as ptes, pmds and puds; p4ds are now considered too. Reported-by: David Hildenbrand <[email protected]> Suggested-by: Peter Zijlstra (Intel) <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/linux-mm/[email protected]/ Signed-off-by: Steve Capper <[email protected]> Acked-by: David Hildenbrand <[email protected]> Reviewed-by: Anshuman Khandual <[email protected]> Reviewed-by: Catalin Marinas <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2022-04-06arm64: alternatives: mark patch_alternative() as `noinstr`Joey Gouly1-3/+3
The alternatives code must be `noinstr` such that it does not patch itself, as the cache invalidation is only performed after all the alternatives have been applied. Mark patch_alternative() as `noinstr`. Mark branch_insn_requires_update() and get_alt_insn() with `__always_inline` since they are both only called through patch_alternative(). Booting a kernel in QEMU TCG with KCSAN=y and ARM64_USE_LSE_ATOMICS=y caused a boot hang: [ 0.241121] CPU: All CPU(s) started at EL2 The alternatives code was patching the atomics in __tsan_read4() from LL/SC atomics to LSE atomics. The following fragment is using LL/SC atomics in the .text section: | <__tsan_unaligned_read4+304>: ldxr x6, [x2] | <__tsan_unaligned_read4+308>: add x6, x6, x5 | <__tsan_unaligned_read4+312>: stxr w7, x6, [x2] | <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304> This LL/SC atomic sequence was to be replaced with LSE atomics. However since the alternatives code was instrumentable, __tsan_read4() was being called after only the first instruction was replaced, which led to the following code in memory: | <__tsan_unaligned_read4+304>: ldadd x5, x6, [x2] | <__tsan_unaligned_read4+308>: add x6, x6, x5 | <__tsan_unaligned_read4+312>: stxr w7, x6, [x2] | <__tsan_unaligned_read4+316>: cbnz w7, <__tsan_unaligned_read4+304> This caused an infinite loop as the `stxr` instruction never completed successfully, so `w7` was always 0. Signed-off-by: Joey Gouly <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Will Deacon <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2022-04-06ata: ahci: Rename CONFIG_SATA_LPM_POLICY configuration item backMario Limonciello3-4/+6
CONFIG_SATA_LPM_MOBILE_POLICY was renamed to CONFIG_SATA_LPM_POLICY in commit 4dd4d3deb502 ("ata: ahci: Rename CONFIG_SATA_LPM_MOBILE_POLICY configuration item"). This can potentially cause problems as users would invisibly lose configuration policy defaults when they built the new kernel. To avoid such problems, switch back to the old name (even if it's wrong). Suggested-by: Christoph Hellwig <[email protected]> Suggested-by: Damien Le Moal <[email protected]> Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Damien Le Moal <[email protected]>
2022-04-05net: ethernet: mv643xx: Fix over zealous checking of_get_mac_address()Andrew Lunn1-1/+1
There is often not a MAC address available in an EEPROM accessible by Linux with Marvell devices. Instead the bootload has the MAC address and directly programs it into the hardware. So don't consider an error from of_get_mac_address() has fatal. However, the check was added for the case where there is a MAC address in an the EEPROM, but the EEPROM has not probed yet, and -EPROBE_DEFER is returned. In that case the error should be returned. So make the check specific to this error code. Cc: Mauri Sandberg <[email protected]> Reported-by: Thomas Walther <[email protected]> Fixes: 42404d8f1c01 ("net: mv643xx_eth: process retval from of_get_mac_address") Signed-off-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-04-05net: openvswitch: don't send internal clone attribute to the userspace.Ilya Maximets2-2/+4
'OVS_CLONE_ATTR_EXEC' is an internal attribute that is used for performance optimization inside the kernel. It's added by the kernel while parsing user-provided actions and should not be sent during the flow dump as it's not part of the uAPI. The issue doesn't cause any significant problems to the ovs-vswitchd process, because reported actions are not really used in the application lifecycle and only supposed to be shown to a human via ovs-dpctl flow dump. However, the action list is still incorrect and causes the following error if the user wants to look at the datapath flows: # ovs-dpctl add-dp system@ovs-system # ovs-dpctl add-flow "<flow match>" "clone(ct(commit),0)" # ovs-dpctl dump-flows <flow match>, packets:0, bytes:0, used:never, actions:clone(bad length 4, expected -1 for: action0(01 00 00 00), ct(commit),0) With the fix: # ovs-dpctl dump-flows <flow match>, packets:0, bytes:0, used:never, actions:clone(ct(commit),0) Additionally fixed an incorrect attribute name in the comment. Fixes: b233504033db ("openvswitch: kernel datapath clone action") Signed-off-by: Ilya Maximets <[email protected]> Acked-by: Aaron Conole <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.