aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-07-28Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds16-64/+114
Pull rdma fixes from Jason Gunthorpe: "Several smaller driver fixes and a core RDMA CM regression fix: - Fix improperly accepting flags from userspace in mlx4 - Add missing DMA barriers for irdma - Fix two kcsan warnings in irdma - Report the correct CQ op code to userspace in irdma - Report the correct MW bind error code for irdma - Load the destination address in RDMA CM to resolve a recent regression - Fix a QP regression in mthca - Remove a race processing completions in bnxt_re resulting in a crash - Fix driver unloading races with interrupts and tasklets in bnxt_re - Fix missing error unwind in rxe" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/irdma: Report correct WC error RDMA/irdma: Fix op_type reporting in CQEs RDMA/rxe: Fix an error handling path in rxe_bind_mw() RDMA/bnxt_re: Fix hang during driver unload RDMA/bnxt_re: Prevent handling any completions after qp destroy RDMA/mthca: Fix crash when polling CQ for shared QPs RDMA/core: Update CMA destination address on rdma_resolve_addr RDMA/irdma: Fix data race on CQP request done RDMA/irdma: Fix data race on CQP completion stats RDMA/irdma: Add missing read barriers RDMA/mlx4: Make check for invalid flags stricter
2023-07-28Merge tag 'tpmdd-v6.5-rc4' of ↵Linus Torvalds8-11/+21
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd Pull tpm fixes from Jarkko Sakkinen: "I picked up three small scale updates that I think would improve the quality of the release" * tag 'tpmdd-v6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: tpm_tis: Explicitly check for error code tpm: Switch i2c drivers back to use .probe() security: keys: perform capable check only on privileged operations
2023-07-28ring-buffer: Fix wrong stat of cpu_buffer->readZheng Yejian1-10/+12
When pages are removed in rb_remove_pages(), 'cpu_buffer->read' is set to 0 in order to make sure any read iterators reset themselves. However, this will mess 'entries' stating, see following steps: # cd /sys/kernel/tracing/ # 1. Enlarge ring buffer prepare for later reducing: # echo 20 > per_cpu/cpu0/buffer_size_kb # 2. Write a log into ring buffer of cpu0: # taskset -c 0 echo "hello1" > trace_marker # 3. Read the log: # cat per_cpu/cpu0/trace_pipe <...>-332 [000] ..... 62.406844: tracing_mark_write: hello1 # 4. Stop reading and see the stats, now 0 entries, and 1 event readed: # cat per_cpu/cpu0/stats entries: 0 [...] read events: 1 # 5. Reduce the ring buffer # echo 7 > per_cpu/cpu0/buffer_size_kb # 6. Now entries became unexpected 1 because actually no entries!!! # cat per_cpu/cpu0/stats entries: 1 [...] read events: 0 To fix it, introduce 'page_removed' field to count total removed pages since last reset, then use it to let read iterators reset themselves instead of changing the 'read' pointer. Link: https://lore.kernel.org/linux-trace-kernel/[email protected] Cc: <[email protected]> Cc: <[email protected]> Fixes: 83f40318dab0 ("ring-buffer: Make removal of ring buffer pages atomic") Signed-off-by: Zheng Yejian <[email protected]> Signed-off-by: Steven Rostedt (Google) <[email protected]>
2023-07-28perf build: Add Wextra for C++ compilationIan Rogers2-1/+4
Commit d58ac0bf8d1e ("perf build: Add clang and llvm compile and linking support") added -Wall and -Wno-strict-aliasing for CXXFLAGS, but not -Wextra. -Wno-strict-aliasing is no longer necessary, adding -Wextra for CXXFLAGS requires adding -Wno-unused-parameter clang.cpp and clang-test.cpp for LIBCLANGLLVM=1 to build. Signed-off-by: Ian Rogers <[email protected]> Acked-by: James Clark <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Eduard Zingerman <[email protected]> Cc: Gaosheng Cui <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rob Herring <[email protected]> Cc: Tom Rix <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf build: Don't always set -funwind-tables and -ggdb3Ian Rogers1-4/+3
Commit 6a40cd90f5deb6de ("perf tools: Add libunwind dependency for DWARF CFI unwinding") added libunwind support but also -funwind-tables and -ggdb3 to the standard build. These build flags aren't necessary so remove, set -g when DEBUG is enabled for the build. Signed-off-by: Ian Rogers <[email protected]> Acked-by: James Clark <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Eduard Zingerman <[email protected]> Cc: Gaosheng Cui <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rob Herring <[email protected]> Cc: Tom Rix <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf bpf-loader: Remove unneeded diagnostic pragmaIan Rogers1-3/+0
Added during the progress to libbpf 1.0 the deprecated functions are no longer used and so the pragma can be removed. Signed-off-by: Ian Rogers <[email protected]> Acked-by: James Clark <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andrii Nakryiko <[email protected]> Cc: Eduard Zingerman <[email protected]> Cc: Gaosheng Cui <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Nathan Chancellor <[email protected]> Cc: Nick Desaulniers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Rob Herring <[email protected]> Cc: Tom Rix <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf docs: Update metric usage for Alibaba's T-Head PMU driver (arm64)Jing Zhang1-0/+5
Alibaba's T-Head ali_drw PMU supports DDR bandwidth metrics. Update its usage in the documentation. Reviewed-by: John Garry <[email protected]> Signed-off-by: Jing Zhang <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Shuai Xue <[email protected]> Cc: Will Deacon <[email protected]> Cc: Zhuo Song <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf vendor events arm64: Add JSON metrics for Yitian 710 DDRJing Zhang1-0/+20
Add JSON metrics for T-HEAD Yitian 710 SoC DDR. Reviewed-by: John Garry <[email protected]> Signed-off-by: Jing Zhang <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Shuai Xue <[email protected]> Cc: Will Deacon <[email protected]> Cc: Zhuo Song <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf jevents: Add support for Yitian 710 DDR PMU (arm64) aliasingJing Zhang2-0/+374
Add alias support for T-HEAD Yitian 710 SoC DDR PMU events. Reviewed-by: John Garry <[email protected]> Reviewed-by: Shuai Xue <[email protected]> Signed-off-by: Jing Zhang <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Will Deacon <[email protected]> Cc: Zhuo Song <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf tools: Add a place to put kernel config fragments for test runsJames Clark3-0/+19
Defconfig doesn't give full coverage for a perf test run, so these can be merged with defconfig to do so. It's not complete yet, but is a starting point as a place to add to when a specific test needs something extra to run. Signed-off-by: James Clark <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: [email protected] Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Leo Yan <[email protected]> Cc: Mark Brown <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf scripts python: Add command execution for gecko scriptAnup Sharma2-0/+5
This will enable the execution of gecko.py script using record and report commands in 'perf script'. And this will be also reflected at "perf script -l" command. For Example: perf script record gecko perf script report gecko Committer notes: As discussed on the perf tools office hours, I made -F 99 the default for the record script and removed the double -- on the report script so that the existing 'perf script' protocol for the combined operation: # perf script gecko Works, i.e. the record script pipes its stdout into the stdin of the report script, basically: /bin/sh /usr/libexec/perf-core/scripts/python/bin/gecko-record -F 99 -g -a -q -o - | \ /bin/sh /usr/libexec/perf-core/scripts/python/bin/gecko-report -i - Testing it: The resulting JSON file needs to be uploaded to https://profiler.firefox.com, Anup already has code to start a local http server on the trace_begin handler of the gecko python script, start firefox and feed it the JSON. The example below only collects sample for the specified workload, so that we don't produce thousands of lines, to collect system wide samples, use instead: # perf script gecko -a sleep 0.5 # nohup perf script gecko sleep 0.5 { "meta": { "interval": 1, "processType": 0, "product": "x86_64 GNU/Linux", "stackwalk": 1, "debug": 0, "gcpoison": 0, "asyncstack": 1, "startTime": 274601692.636, "shutdownTime": null, "version": 24, "presymbolicated": true, "categories": [ { "name": "User", "color": "yellow", "subcategories": [ "Other" ] }, { "name": "Kernel", "color": "orange", "subcategories": [ "Other" ] } ], "markerSchema": [] }, "libs": [], "threads": [ { "tid": 3344498, "pid": 3344498, "name": "sleep", "markers": { "schema": { "name": 0, "startTime": 1, "endTime": 2, "phase": 3, "category": 4, "data": 5 }, "data": [] }, "samples": { "schema": { "stack": 0, "time": 1, "responsiveness": 2 }, "data": [ [ 21, 274601692.636, 0 ], [ 23, 274601692.641, 0 ], [ 29, 274601692.643, 0 ], [ 42, 274601692.648, 0 ] ] }, "frameTable": { "schema": { "location": 0, "relevantForJS": 1, "innerWindowID": 2, "implementation": 3, "optimizations": 4, "line": 5, "column": 6, "category": 7, "subcategory": 8 }, "data": [ [ 0, false, 0, null, null, null, null, 1, null ], [ 1, false, 0, null, null, null, null, 1, null ], [ 2, false, 0, null, null, null, null, 1, null ], [ 3, false, 0, null, null, null, null, 1, null ], [ 4, false, 0, null, null, null, null, 1, null ], [ 5, false, 0, null, null, null, null, 1, null ], [ 6, false, 0, null, null, null, null, 1, null ], [ 7, false, 0, null, null, null, null, 1, null ], [ 8, false, 0, null, null, null, null, 1, null ], [ 9, false, 0, null, null, null, null, 1, null ], [ 10, false, 0, null, null, null, null, 1, null ], [ 11, false, 0, null, null, null, null, 1, null ], [ 12, false, 0, null, null, null, null, 1, null ], [ 13, false, 0, null, null, null, null, 1, null ], [ 14, false, 0, null, null, null, null, 1, null ], [ 15, false, 0, null, null, null, null, 1, null ], [ 16, false, 0, null, null, null, null, 1, null ], [ 17, false, 0, null, null, null, null, 1, null ], [ 18, false, 0, null, null, null, null, 1, null ], [ 19, false, 0, null, null, null, null, 1, null ], [ 20, false, 0, null, null, null, null, 1, null ], [ 21, false, 0, null, null, null, null, 1, null ], [ 22, false, 0, null, null, null, null, 1, null ], [ 23, false, 0, null, null, null, null, 1, null ], [ 24, false, 0, null, null, null, null, 1, null ], [ 25, false, 0, null, null, null, null, 1, null ], [ 26, false, 0, null, null, null, null, 1, null ], [ 27, false, 0, null, null, null, null, 1, null ], [ 28, false, 0, null, null, null, null, 1, null ], [ 29, false, 0, null, null, null, null, 1, null ], [ 30, false, 0, null, null, null, null, 1, null ], [ 31, false, 0, null, null, null, null, 1, null ], [ 32, false, 0, null, null, null, null, 1, null ], [ 33, false, 0, null, null, null, null, 1, null ], [ 34, false, 0, null, null, null, null, 1, null ], [ 35, false, 0, null, null, null, null, 1, null ], [ 36, false, 0, null, null, null, null, 1, null ], [ 37, false, 0, null, null, null, null, 1, null ], [ 38, false, 0, null, null, null, null, 1, null ] ] }, "stackTable": { "schema": { "prefix": 0, "frame": 1 }, "data": [ [ null, 0 ], [ 0, 1 ], [ 1, 2 ], [ 2, 3 ], [ 3, 4 ], [ 4, 5 ], [ 5, 6 ], [ 6, 7 ], [ 7, 8 ], [ 8, 9 ], [ 9, 10 ], [ 10, 11 ], [ 11, 12 ], [ 12, 13 ], [ 13, 14 ], [ 14, 15 ], [ 15, 16 ], [ 16, 17 ], [ 17, 18 ], [ 18, 19 ], [ 19, 20 ], [ 20, 21 ], [ 20, 22 ], [ 22, 23 ], [ 11, 24 ], [ 24, 25 ], [ 25, 26 ], [ 26, 27 ], [ 27, 28 ], [ 28, 29 ], [ 9, 11 ], [ 30, 24 ], [ 31, 25 ], [ 32, 30 ], [ 33, 31 ], [ 34, 32 ], [ 35, 29 ], [ 36, 33 ], [ 37, 34 ], [ 38, 35 ], [ 39, 36 ], [ 40, 37 ], [ 41, 38 ] ] }, "stringTable": [ "__func__.0 (in [kernel.kallsyms].rodata)", "perf_trace_ext4_fc_track_inode (in [kernel.kallsyms])", "perf_trace_ext4_es_insert_delayed_block (in [kernel.kallsyms])", "ext4_es_show_pblock (in [kernel.kallsyms])", "perf_trace_ext4_ext_rm_leaf (in [kernel.kallsyms])", "devcgroup_access_write (in [kernel.kallsyms])", "devcgroup_update_access (in [kernel.kallsyms])", "propagate_exception (in [kernel.kallsyms])", "revalidate_active_exceptions (in [kernel.kallsyms])", "perf_trace_ext4_fc_commit_stop (in [kernel.kallsyms])", "perf_fetch_caller_regs (in [kernel.kallsyms])", "khugepaged (in [kernel.kallsyms])", "khugepaged_wait_work (in [kernel.kallsyms])", "freezable_schedule_timeout (in [kernel.kallsyms])", "freezer_count (in [kernel.kallsyms])", "try_to_freeze (in [kernel.kallsyms])", "try_to_freeze_unsafe (in [kernel.kallsyms])", "split_huge_pages_write (in [kernel.kallsyms])", "migrate_pages (in [kernel.kallsyms])", "unmap_and_move (in [kernel.kallsyms])", "__unmap_and_move (in [kernel.kallsyms])", "collect_events (in [kernel.kallsyms])", "uncore_down_prepare (in [kernel.kallsyms])", "perf_iommu_read (in [kernel.kallsyms])", "khugepaged_do_scan (in [kernel.kallsyms])", "khugepaged_scan_mm_slot (in [kernel.kallsyms])", "khugepaged_scan_file (in [kernel.kallsyms])", "need_resched (in [kernel.kallsyms])", "get_current (in [kernel.kallsyms])", "move_to_new_page (in [kernel.kallsyms])", "khugepaged_scan_pmd (in [kernel.kallsyms])", "trace_mm_khugepaged_scan_pmd (in [kernel.kallsyms])", "migrate_huge_page_move_mapping (in [kernel.kallsyms])", "do_huge_pmd_numa_page (in [kernel.kallsyms])", "pmd_pfn (in [kernel.kallsyms])", "protnone_mask (in [kernel.kallsyms])", "__pte_needs_invert (in [kernel.kallsyms])", "reclaim_high (in [kernel.kallsyms])", "memcg_memory_event (in [kernel.kallsyms])" ], "registerTime": 0, "unregisterTime": null, "processType": "default" } ], "processes": [], "pausedRanges": [] } # Signed-off-by: Anup Sharma <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/cbf03cda175ea3dd2c6cd87bd3f12d803446cb95.1689961706.git.anupnewsmail@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf scripts python: Implement add sample function and thread processingAnup Sharma1-2/+50
The stack has been created for storing func and dso from the callchain. The sample has been added to a specific thread. It first checks if the thread exists in the Thread class. Then it call _add_sample function which is responsible for appending a new entry to the samples list. Also callchain parsing and storing part is implemented. Moreover removed the comment from thread. Signed-off-by: Anup Sharma <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/5a112be85ccdcdcd611e343f6a7a7482d01f6299.1689961706.git.anupnewsmail@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf scripts python: Implement add sample function and thread processingAnup Sharma1-0/+54
The intern_stack function is responsible for retrieving or creating a stack_id based on the provided frame_id and prefix_id. It first generates a key using the frame_id and prefix_id values. If the stack corresponding to the key is found in the stackMap, it is returned. Otherwise, a new stack is created by appending the prefix_id and frame_id to the stackTable. The key and the index of the newly created stack are added to the stackMap for future reference. The _intern_frame function is responsible for retrieving or creating a frame_id based on the provided frame string. If the frame_id corresponding to the frameString is found in the frameMap, it is returned. Otherwise, a new frame is created by appending relevant information to the frameTable and adding the frameString to the string_id through _intern_string. The _intern_string function will gets a matching string, or saves the new string and returns a String ID. Signed-off-by: Anup Sharma <[email protected]> Link: https://lore.kernel.org/r/4442f4b1ab4c7317cf940560a3a285fcdfbeeb08.1689961706.git.anupnewsmail@gmail.com Cc: Mark Rutland <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf scripts python: Add trace end processing and PRODUCT and CATEGORIES ↵Anup Sharma1-1/+64
information The final output will now be presented in JSON format following the Gecko profile structure. Additionally, the inclusion of PRODUCT allows easy retrieval of header information for UI. Furthermore, CATEGORIES have been introduced to enable customization of kernel and user colors using input arguments. To facilitate this functionality, an argparse-based parser has been implemented. Note: The implementation of threads will be addressed in subsequent commits for now I have commented it out. Signed-off-by: Anup Sharma <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/fa6d027e4134c48e8a2ea45dd8f6b21e6a3418e4.1689961706.git.anupnewsmail@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf scripts python: Add classes and conversion functionsAnup Sharma1-1/+132
This commit introduces new classes and conversion functions to facilitate the representation of Gecko profile information. The new classes Frame, Stack, Sample, and Thread are added to handle specific components of the profile data, also link to the origin docs has been commented out. Additionally, Inside the Thread class _to_json_dict() method has been created that converts the current thread data into the corresponding format expected by the GeckoThread JSON schema, as per the Gecko profile format specification. Signed-off-by: Anup Sharma <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/ab7b40bd32df7101a6f8b4a3aa41570b63b831ac.1689961706.git.anupnewsmail@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf scripts python: Extact necessary information from process eventAnup Sharma1-1/+13
The script takes in a sample event dictionary(param_dict) and retrieves relevant data such as time stamp, PID, TID, and comm for each event. Also start time is defined as a global variable as it need to be passed to trace_end for gecko meta information field creation. Signed-off-by: Anup Sharma <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/19910fefcfe4be03cd5c2aa3fec11d3f86c0381b.1689961706.git.anupnewsmail@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf scripts python: Add initial script file with usage informationAnup Sharma1-0/+31
Added necessary modules, including the Perf-Trace-Util library, and defines the required functions and variables for using perf script python. The perf_trace_context and Core modules for tracing and processing events has been also imported. Added usage information. Signed-off-by: Anup Sharma <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/f2f1a62f1cc69f44a5414da46a26a4cf124d2744.1689961706.git.anupnewsmail@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf doc: Fix typo in perf.data-file-format.txtXiu Jianfeng1-1/+1
The 'it' should be 'is' here, fix it. Signed-off-by: Xiu Jianfeng <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf machine: Include data symbols in the kernel mapNamhyung Kim1-1/+3
When 'perf record -d' is used, it needs data mmaps to symbolize global data. But it missed to collect kernel data maps so it cannot symbolize them. Instead of having a separate map, just increase the kernel map size to include the data section. Probably we can have a separate kernel map for data, but the current code assumes a single kernel map. So it'd require more changes in other places and looks error-prone. I decided not to go that way for now. Also it seems the kernel module size already includes the data section. For example, my system has the following. $ grep -e _stext -e _etext -e _edata /proc/kallsyms ffffffff99800000 T _stext ffffffff9a601ac8 T _etext ffffffff9b446a00 D _edata Size of the text section is (0x9a601ac8 - 0x99800000 = 0xe01ac8) and size including data section is (0x9b446a00 - 0x99800000 = 0x1c46a00). Before: $ perf record -d true $ perf report -D | grep MMAP | head -1 0 0 0x460 [0x60]: PERF_RECORD_MMAP -1/0: [0xffffffff99800000(0xe01ac8) @ 0xffffffff99800000]: x [kernel.kallsyms]_text ^^^^^^^^ here After: $ perf report -D | grep MMAP | head -1 0 0 0x460 [0x60]: PERF_RECORD_MMAP -1/0: [0xffffffff99800000(0x1c46a00) @ 0xffffffff99800000]: x [kernel.kallsyms]_text ^^^^^^^^^ Instead of just replacing it to _edata, try _edata first and then fall back to _etext just in case. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf symbols: Add kallsyms__get_symbol_start()Namhyung Kim2-3/+29
The kallsyms__get_symbol_start() to get any symbol address from kallsyms. The existing kallsyms__get_function_start() only allows text symbols so create this to allow data symbols too. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Adrian Hunter <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf parse-events: Remove ABORT_ONIan Rogers1-8/+14
Prefer informative messages rather than none with ABORT_ON. Document one failure mode and add an error message for another. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf parse-events: Improve location for add pmuIan Rogers3-11/+13
Improve the location for add PMU for cases when PMUs aren't found. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf parse-events: Populate error column for BPF/tracepoint eventsIan Rogers4-39/+57
Follow convention from parse_events_terms__num/str and pass the YYLTYPE for the location. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf parse-events: Additional error reportingIan Rogers1-6/+19
When no events or PMUs match report an error for event_pmu: Before: ``` $ perf stat -e 'asdfasdf' -a sleep 1 Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ``` After: ``` $ perf stat -e 'asdfasdf' -a sleep 1 event syntax error: 'asdfasdf' \___ Bad event name Unabled to find PMU or event on a PMU of 'asdfasdf' Run 'perf list' for a list of valid events Usage: perf stat [<options>] [<command>] -e, --event <event> event selector. use 'perf list' to list available events ``` Fixes the inadvertent removal when hybrid parsing was modified. Fixes: 70c90e4a6b2fbe77 ("perf parse-events: Avoid scanning PMUs before parsing") Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf parse-events: Separate ENOMEM memory handlingIan Rogers1-52/+82
Add PE_ABORT that will YYNOMEM or YYABORT accordingly. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf parse-events: Move instances of YYABORT to YYNOMEMIan Rogers1-18/+40
Migration to improve error reporting as YYABORT cases should carry event parsing errors. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf parse-events: Separate YYABORT and YYNOMEM casesIan Rogers1-19/+26
Split cases in event_pmu for greater accuracy. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf parse-event: Add memory allocation test for name termsIan Rogers3-3/+6
If the name memory allocation fails then propagate to the parser. Committer notes: Use $(BISON_FALLBACK_FLAGS) on the bison call so that we continue building with older bison versions, before 3.81, where YYNOMEM isn't present. Signed-off-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Athira Rajeev <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28perf build: Define YYNOMEM as YYNOABORT for bison < 3.81Arnaldo Carvalho de Melo1-0/+6
YYNOMEM was introduced in bison 3.81, so define it as YYABORT for older versions, which should provide the previous perf behaviour. Cc: Adrian Hunter <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28cxl/memdev: Only show sanitize sysfs files when supportedDavidlohr Bueso4-3/+82
If the device does not support Sanitize or Secure Erase commands, hide the respective sysfs interfaces such that the operation can never be attempted. In order to be generic, keep track of the enabled security commands found in the CEL - the driver does not support Security Passthrough. Signed-off-by: Davidlohr Bueso <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Dave Jiang <[email protected]> Signed-off-by: Vishal Verma <[email protected]>
2023-07-28cxl/memdev: Document security state in kern-docDavidlohr Bueso1-0/+1
... as is the case with all members of struct cxl_memdev_state. Signed-off-by: Davidlohr Bueso <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Dave Jiang <[email protected]> Signed-off-by: Vishal Verma <[email protected]>
2023-07-28cxl/memdev: Improve sanitize ABI descriptionsDavidlohr Bueso1-2/+11
Be more detailed about the CPU cache management situation. The same goes for both sanitize and secure erase. Signed-off-by: Davidlohr Bueso <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Dave Jiang <[email protected]> Signed-off-by: Vishal Verma <[email protected]>
2023-07-28perf test uprobe_from_different_cu: Skip if there is no gccGeorg Müller1-1/+7
Without gcc, the test will fail. On cleanup, ignore probe removal errors. Otherwise, in case of an error adding the probe, the temporary directory is not removed. Fixes: 56cbeacf14353057 ("perf probe: Add test for regression introduced by switch to die_get_decl_file()") Signed-off-by: Georg Müller <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Georg Müller <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/CAP-5=fUP6UuLgRty3t2=fQsQi3k4hDMz415vWdp1x88QMvZ8ug@mail.gmail.com/ Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2023-07-28Merge tag 'arm64-fixes' of ↵Linus Torvalds2-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes from Catalin Marinas: - A couple of SME updates for recent fixes (one of which went to stable): reverting the flushing of the SME hardware state along with the thread flushing and making sure we have the correct vector length before reallocating. - An ACPI/IORT fix to avoid skipping ID mappings whose "number of IDs" is 0 (the spec reports the number of IDs in the mapping range minus 1). * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: ACPI/IORT: Remove erroneous id_count check in iort_node_get_rmr_info() arm64/sme: Set new vector length before reallocating arm64/fpsimd: Don't flush SME register hardware state along with thread
2023-07-28Merge tag 'for-linus-6.5a-rc4-tag' of ↵Linus Torvalds7-32/+93
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - A fix for a performance problem in QubesOS, adding a way to drain the queue of grants experiencing delayed unmaps faster - A patch enabling the use of static event channels from user mode, which was omitted when introducing supporting static event channels - A fix for a problem where Xen related code didn't check properly for running in a Xen environment, resulting in a WARN splat * tag 'for-linus-6.5a-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen: speed up grant-table reclaim xen/evtchn: Introduce new IOCTL to bind static evtchn xenbus: check xen_domain in xenbus_probe_initcall
2023-07-28tpm_tis: Explicitly check for error codeAlexander Steffen1-2/+7
recv_data either returns the number of received bytes, or a negative value representing an error code. Adding the return value directly to the total number of received bytes therefore looks a little weird, since it might add a negative error code to a sum of bytes. The following check for size < expected usually makes the function return ETIME in that case, so it does not cause too many problems in practice. But to make the code look cleaner and because the caller might still be interested in the original error code, explicitly check for the presence of an error code and pass that through. Cc: [email protected] Fixes: cb5354253af2 ("[PATCH] tpm: spacing cleanups 2") Signed-off-by: Alexander Steffen <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2023-07-28tpm: Switch i2c drivers back to use .probe()Uwe Kleine-König6-6/+6
After commit b8a1a4cd5a98 ("i2c: Provide a temporary .probe_new() call-back type"), all drivers being converted to .probe_new() and then 03c835f498b5 ("i2c: Switch .probe() to not take an id parameter") convert back to (the new) .probe() to be able to eventually drop .probe_new() from struct i2c_driver. Signed-off-by: Uwe Kleine-König <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2023-07-28security: keys: perform capable check only on privileged operationsChristian Göttsche1-3/+8
If the current task fails the check for the queried capability via `capable(CAP_SYS_ADMIN)` LSMs like SELinux generate a denial message. Issuing such denial messages unnecessarily can lead to a policy author granting more privileges to a subject than needed to silence them. Reorder CAP_SYS_ADMIN checks after the check whether the operation is actually privileged. Signed-off-by: Christian Göttsche <[email protected]> Reviewed-by: Jarkko Sakkinen <[email protected]> Signed-off-by: Jarkko Sakkinen <[email protected]>
2023-07-28Merge tag 'ceph-for-6.5-rc4' of https://github.com/ceph/ceph-clientLinus Torvalds3-39/+88
Pull ceph fixes from Ilya Dryomov: "A patch to reduce the potential for erroneous RBD exclusive lock blocklisting (fencing) with a couple of prerequisites and a fixup to prevent metrics from being sent to the MDS even just once after that has been disabled by the user. All marked for stable" * tag 'ceph-for-6.5-rc4' of https://github.com/ceph/ceph-client: rbd: retrieve and check lock owner twice before blocklisting rbd: harden get_lock_owner_info() a bit rbd: make get_lock_owner_info() return a single locker or NULL ceph: never send metrics if disable_send_metrics is set
2023-07-28Merge tag '9p-fixes-6.5-rc3' of ↵Linus Torvalds9-57/+24
git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs Pull 9p fixes from Eric Van Hensbergen: "Misc set of fixes for 9p. Most of these clean up warnings we've gotten out of compilation tools, but several of them were from inspection while hunting down a couple of regressions. The most important one is 75b396821cb7 ("fs/9p: remove unnecessary and overrestrictive check") which caused a regression for some folks by restricting mmap in any case where writeback caches weren't enabled. Most of the other bugs caught via inspection were type mismatches" * tag '9p-fixes-6.5-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs: fs/9p: Remove unused extern declaration 9p: remove dead stores (variable set again without being read) 9p: virtio: skip incrementing unused variable 9p: virtio: make sure 'offs' is initialized in zc_request 9p: virtio: fix unlikely null pointer deref in handle_rerror 9p: fix ignored return value in v9fs_dir_release fs/9p: remove unnecessary invalidate_inode_pages2 fs/9p: fix type mismatch in file cache mode helper fs/9p: fix typo in comparison logic for cache mode fs/9p: remove unnecessary and overrestrictive check fs/9p: Fix a datatype used with V9FS_DIRECT_IO
2023-07-28Merge tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linuxLinus Torvalds5-88/+63
Pull block fixes from Jens Axboe: "A few fixes that should go into the current kernel release, mainly: - Set of fixes for dasd (Stefan) - Handle interruptible waits returning because of a signal for ublk (Ming)" * tag 'block-6.5-2023-07-28' of git://git.kernel.dk/linux: ublk: return -EINTR if breaking from waiting for existed users in DEL_DEV ublk: fail to recover device if queue setup is interrupted ublk: fail to start device if queue setup is interrupted block: Fix a source code comment in include/uapi/linux/blkzoned.h s390/dasd: print copy pair message only for the correct error s390/dasd: fix hanging device after request requeue s390/dasd: use correct number of retries for ERP requests s390/dasd: fix hanging device after quiesce/resume
2023-07-28Merge tag 'io_uring-6.5-2023-07-28' of git://git.kernel.dk/linuxLinus Torvalds1-6/+17
Pull io_uring fix from Jens Axboe: "Just a single tweak to a patch from last week, to avoid having idle cqring waits be attributed as iowait" * tag 'io_uring-6.5-2023-07-28' of git://git.kernel.dk/linux: io_uring: gate iowait schedule on having pending requests
2023-07-28Merge tag 'for-linus-iommufd' of ↵Linus Torvalds4-31/+76
git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd Pull iommufd fixes from Jason Gunthorpe: "Two user triggerable problems: - Syzkaller found a way to trigger a WARN_ON and leak memory by racing destroy with other actions - There is still a bug in the "batch carry" stuff that gets invoked for complex cases with accesses and unmapping of huge pages. The test suite found this (triggers rarely)" * tag 'for-linus-iommufd' of git://git.kernel.org/pub/scm/linux/kernel/git/jgg/iommufd: iommufd: Set end correctly when doing batch carry iommufd: IOMMUFD_DESTROY should not increase the refcount
2023-07-28KVM: arm64: Skip instruction after emulating write to TCR_EL1Oliver Upton1-0/+1
Whelp, this is embarrassing. Since commit 082fdfd13841 ("KVM: arm64: Prevent guests from enabling HA/HD on Ampere1") KVM traps writes to TCR_EL1 on AmpereOne to work around an erratum in the unadvertised HAFDBS implementation, preventing the guest from enabling the feature. Unfortunately, I failed virtualization 101 when working on that change, and forgot to advance PC after instruction emulation. Do the right thing and skip the MSR instruction after emulating the write. Fixes: 082fdfd13841 ("KVM: arm64: Prevent guests from enabling HA/HD on Ampere1") Acked-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Oliver Upton <[email protected]>
2023-07-28Merge tag 'for-6.5/dm-fixes' of ↵Linus Torvalds4-21/+30
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix double free on memory allocation failure in DM integrity target's integrity_recalc() - Fix locking in DM raid target's raid_ctr() and around call to md_stop() - Fix DM cache target's cleaner policy to always allow work to be queued for writeback; even if cache isn't idle. * tag 'for-6.5/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm cache policy smq: ensure IO doesn't prevent cleaner policy progress dm raid: protect md_stop() with 'reconfig_mutex' dm raid: clean up four equivalent goto tags in raid_ctr() dm raid: fix missing reconfig_mutex unlock in raid_ctr() error paths dm integrity: fix double free on memory allocation failure
2023-07-28Merge tag 'sound-6.5-rc4' of ↵Linus Torvalds15-18/+151
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "A collection of device-specific small fixes such as ASoC Realtek codec fixes for PM issues, ASoC nau8821 quirk additions, and usual HD- and USB-audio quirks" * tag 'sound-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda/realtek: Support ASUS G713PV laptop ALSA: usb-audio: Update for native DSD support quirks ALSA: usb-audio: Add quirk for Microsoft Modern Wireless Headset ALSA: hda/relatek: Enable Mute LED on HP 250 G8 ASoC: atmel: Fix the 8K sample parameter in I2SC master ASoC: rt711-sdca: fix for JD event handling in ClockStop Mode0 ASoC: rt711: fix for JD event handling in ClockStop Mode0 ASoC: rt722-sdca: fix for JD event handling in ClockStop Mode0 ASoC: rt712-sdca: fix for JD event handling in ClockStop Mode0 ASoc: codecs: ES8316: Fix DMIC config ASoC: rt5682-sdw: fix for JD event handling in ClockStop Mode0 ASoC: wm8904: Fill the cache for WM8904_ADC_TEST_0 register ASoC: nau8821: Add DMI quirk mechanism for active-high jack-detect ASoC: da7219: Check for failure reading AAD IRQ events ASoC: da7219: Flush pending AAD IRQ when suspending ALSA: seq: remove redundant unsigned comparison to zero ASoC: fsl_spdif: Silence output on stop
2023-07-28Merge tag 'drm-fixes-2023-07-28' of git://anongit.freedesktop.org/drm/drmLinus Torvalds24-55/+88
Pull drm fixes from Dave Airlie: "Regular scheduled fixes, msm and amdgpu leading the way, with some i915 and a single misc fbdev, all seems fine. fbdev: - remove unused function amdgpu: - gfxhub partition fix - Fix error handling in psp_sw_init() - SMU13 fix - DCN 3.1 fix - DCN 3.2 fix - Fix for display PHY programming sequence - DP MST error handling fix - GFX 9.4.3 fix amdkfd: - GFX11 trap handling fix i915: - Use shmem for dpt objects - Fix an error handling path in igt_write_huge() msm: - display: - Fix to correct the UBWC programming for decoder version 4.3 seen on SM8550 - Add the missing flush and fetch bits for DMA4 and DMA5 SSPPs. - Fix to drop the unused dpu_core_perf_data_bus_id enum from the code - Drop the unused dsi_phy_14nm_17mA_regulators from QCM 2290 DSI cfg. - gpu: - Fix warn splat for newer devices without revn - Remove name/revn for a690.. we shouldn't be populating these for newer devices, for consistency, but it slipped through review - Fix a6xx gpu snapshot BINDLESS_DATA size (was listed in bytes instead of dwords, causing AHB faults on a6xx gen4/a660-family) - Disallow submit with fence id 0" * tag 'drm-fixes-2023-07-28' of git://anongit.freedesktop.org/drm/drm: (22 commits) drm/msm: Disallow submit with fence id 0 drm/amdgpu: Restore HQD persistent state register drm/amd/display: Unlock on error path in dm_handle_mst_sideband_msg_ready_event() drm/amd/display: Exit idle optimizations before attempt to access PHY drm/amd/display: Don't apply FIFO resync W/A if rdivider = 0 drm/amd/display: Guard DCN31 PHYD32CLK logic against chip family drm/amd/smu: use AverageGfxclkFrequency* to replace previous GFX Curr Clock drm/amd: Fix an error handling mistake in psp_sw_init() drm/amdgpu: Fix infinite loop in gfxhub_v1_2_xcc_gart_enable (v2) drm/amdkfd: fix trap handling work around for debugging drm/fb-helper: Remove unused inline function drm_fb_helper_defio_init() drm/i915: Fix an error handling path in igt_write_huge() drm/i915/dpt: Use shmem for dpt objects drm/msm: Fix hw_fence error path cleanup drm/msm: Fix IS_ERR_OR_NULL() vs NULL check in a5xx_submit_in_rb() drm/msm/adreno: Fix snapshot BINDLESS_DATA size drm/msm/a690: Remove revn and name drm/msm/adreno: Fix warn splat for devices without revn drm/msm/dsi: Drop unused regulators from QCM2290 14nm DSI PHY config drm/msm/dpu: drop enum dpu_core_perf_data_bus_id ...
2023-07-28Merge tag 'cxl-fixes-6.5-rc4' of ↵Linus Torvalds5-10/+8
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl Pull cxl fixes from Vishal Verma: - Update MAINTAINERS for cxl - A few static analysis fixes - Fix a Kconfig dependency for CONFIG_FW_LOADER * tag 'cxl-fixes-6.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: tools/testing/cxl: Remove unused SZ_512G macro cxl/acpi: Return 'rc' instead of '0' in cxl_parse_cfmws() cxl/acpi: Fix a use-after-free in cxl_parse_cfmws() cxl: Update MAINTAINERS cxl/mem: Fix a double shift bug cxl: fix CONFIG_FW_LOADER dependency
2023-07-28Revert "mm,memblock: reset memblock.reserved to system init state to prevent ↵Mike Rapoport (IBM)1-4/+0
UAF" This reverts commit 9e46e4dcd9d6cd88342b028dbfa5f4fb7483d39c. kbuild reports a warning in memblock_remove_region() because of a false positive caused by partial reset of the memblock state. Doing the full reset will remove the false positives, but will allow late use of memblock_free() to go unnoticed, so it is better to revert the offending commit. WARNING: CPU: 0 PID: 1 at mm/memblock.c:352 memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1)) Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00001-g9e46e4dcd9d6 #2 RIP: 0010:memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1)) Call Trace: memblock_discard (kbuild/src/x86_64/mm/memblock.c:383) page_alloc_init_late (kbuild/src/x86_64/include/linux/find.h:208 kbuild/src/x86_64/include/linux/nodemask.h:266 kbuild/src/x86_64/mm/mm_init.c:2405) kernel_init_freeable (kbuild/src/x86_64/init/main.c:1325 kbuild/src/x86_64/init/main.c:1546) kernel_init (kbuild/src/x86_64/init/main.c:1439) ret_from_fork (kbuild/src/x86_64/arch/x86/kernel/process.c:145) ret_from_fork_asm (kbuild/src/x86_64/arch/x86/entry/entry_64.S:298) Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-lkp/[email protected] Signed-off-by: "Mike Rapoport (IBM)" <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2023-07-28mm/mempolicy: Take VMA lock before replacing policyJann Horn1-1/+14
mbind() calls down into vma_replace_policy() without taking the per-VMA locks, replaces the VMA's vma->vm_policy pointer, and frees the old policy. That's bad; a concurrent page fault might still be using the old policy (in vma_alloc_folio()), resulting in use-after-free. Normally this will manifest as a use-after-free read first, but it can result in memory corruption, including because vma_alloc_folio() can call mpol_cond_put() on the freed policy, which conditionally changes the policy's refcount member. This bug is specific to CONFIG_NUMA, but it does also affect non-NUMA systems as long as the kernel was built with CONFIG_NUMA. Signed-off-by: Jann Horn <[email protected]> Reviewed-by: Suren Baghdasaryan <[email protected]> Fixes: 5e31275cc997 ("mm: add per-VMA lock and helper functions to control it") Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.