aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-14drm/amd/display: Set disp clk in a safe way to avoid over high dpp clk. (v2)Yongqiang Sun3-23/+139
Increase clock, if current dpp div is 0 and request dpp div is 1, request clk is higher than maximum dpp clk as per dpm table. set dispclk to the value of maximum supported dpp clk set div to 1 set dispclk to request value. Decrease clock, currrent dpp div is 1 and request dpp div is 0, current clk is higher than maximum dpp clk as per dpm table. set dispclk to the value of maximum supported dpp clk set div to 0 set dispclk to request value. v2: squash in !DCN build fix Signed-off-by: Yongqiang Sun <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Reviewed-by: Dmytro Laktyushkin <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: add support for regkey "LCDFreeSyncDefault"Samson Tam1-0/+26
Signed-off-by: Samson Tam <[email protected]> Reviewed-by: Anthony Koo <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Correct the plane enumeration order (v2)Shirish S1-24/+53
The order of planes is given by the order they are enumerated by kms. Planes with a higher ID appears above planes with a lower ID. Currently the planes are enumerated in the wrong order, putting the nv12 only plane after the two RGBA planes. This patch corrects the plane enumeration order such that all the overlay planes are initialized first then the primary planes. Due to this change in order the dc_add_plane_to_context() shall receive the planes in reverse order hence this patch reverses the parsing of planes in DM side itself. v2: drop local reverse macro for upstream Signed-off-by: Shirish S <[email protected]> Signed-off-by: Pratik Vishwakarma <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Fix handling of linear transfer functionVitaly Prosyak1-2/+4
Signed-off-by: Vitaly Prosyak <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: dal 3.1.38Tony Cheng1-1/+1
Signed-off-by: Tony Cheng <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Add variable refresh rate parameters to DC structuresAnthony Koo4-1/+33
Time stamping will be part of surface, and will be updated when address is flipped. FreeSync parameters will be attached to stream, as it adjusts the timing dynamically. Signed-off-by: Anthony Koo <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Implement stats loggingAnthony Koo6-31/+510
Stats will be used for debug purposes Signed-off-by: Anthony Koo <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: early return if not in vga mode in disable_vgaEric Yang2-4/+10
The work around for hw bug causes S3 resume failure. Don't execute disable vga logic if not in vga mode. Signed-off-by: Eric Yang <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Enable backlight support for pre-DCE11 ASICsMikita Lipski3-0/+172
Initializing ABM and DMCU modules for dce 80/81/83/100 as in DCE110 Adding constructors and destructors for each module. Adding register list for DMCU in dce80 as some registers are missing in dce80 from the basic list. DMCU is never used, so it would not have any functional impact. Signed-off-by: Mikita Lipski <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: use HW hdr mult for brightness boostKrunoslav Kovac6-7/+45
In MPO scenario when playing SDR clip in HDR desktop mode, Win is boosting desktop and requests driver to boost MPO. But driver boosting is currently done in regamma which is stream property and thus shared between grph and video. Redesigning the boosting in RV: use CM_HDR_MULT register which was added for this scenario. It also has the benefit that it can be done in HIRQL. Signed-off-by: Krunoslav Kovac <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Use MACROS instead of dm_loggerBhawanpreet Lakha3-13/+11
Use DC_LOGGER macro for logs. Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Move DTRACE and dml_print definesBhawanpreet Lakha4-2/+37
These MACROS are only being used by a few files but gets pulled in by dc.h Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Modified set bandwidth sequence.Yongqiang Sun3-12/+38
This change make sure bandwidth is set properly. For increase bandwidth, set bandwidth before backend and front end programming. For decrease bandwidth, set bandwidth after. To avoid smu hang when reboot and dpms due to 0 disp clk, keep min disp clock as 100Mhz. Signed-off-by: Yongqiang Sun <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: fix check condition for edp power controlEric Yang2-7/+17
Per discussion with VBIOS team, the orginal check is not correct in all cases on latest VBIOS. Additional check is needed. This change should maintain old behaviour on older VBIOS. Signed-off-by: Eric Yang <[email protected]> Reviewed-by: Charlene Liu <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Fix takover from VGA modeBhawanpreet Lakha2-2/+18
HW Engineer's Notes: During switch from vga->extended, if we set the VGA_TEST_ENABLE and then hit the VGA_TEST_RENDER_START, then the DCHUBP timing gets updated correctly. Then vBIOS will have it poll for the VGA_TEST_RENDER_DONE and unset VGA_TEST_ENABLE, to leave it in the same state as before. Signed-off-by: Bhawanpreet Lakha <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Allow passing of syspll id to get_smu_clock_infoJerry (Fangzhi) Zuo3-6/+7
Signed-off-by: Jerry (Fangzhi) Zuo <[email protected]> Reviewed-by: Hersen Wu <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Remove 300Mhz minimum disp clk limit.Yongqiang Sun3-5/+5
300Mhz disp clk limit was a workaround that was fixed in SMU and is no longer needed. Signed-off-by: Yongqiang Sun <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Convert CTM to 2's complementLeo (Sunpeng) Li1-3/+12
DRM's documentation for the color transform matrix does not specify whether the values are in signed-magnitude, or 2's complement. Therefore, it was assumed to use 2's complement. However, existing usermode implementations use signed-magnitude. Therefore, conform to existing standards, and convert to 2's complement internally. Signed-off-by: Leo (Sunpeng) Li <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Varibright add null checkSivapiriyanKumarasamy1-1/+1
Add null check for stream update Signed-off-by: SivapiriyanKumarasamy <[email protected]> Reviewed-by: Krunoslav Kovac <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Varibright fix bug and review commentsSivapiriyanKumarasamy7-19/+37
Fix bug and make changes from review 132656 Signed-off-by: SivapiriyanKumarasamy <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Vari-bright looks disabled near end of MM14SivapiriyanKumarasamy4-12/+40
Avoid hanging DMCU by setting abm level only when OTG unblanked Signed-off-by: SivapiriyanKumarasamy <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Use correct error codesLeo (Sunpeng) Li1-6/+3
Should return -ENOMEM when allocation fails. Also, just return the error code instead of using a variable. Signed-off-by: Leo (Sunpeng) Li <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/display: Fix memleaks when atomic check fails.Leo (Sunpeng) Li1-9/+25
While checking plane states for updates during atomic check, we create dc_plane_states in preparation. These dc states should be freed if something errors. Although the input transfer function is also freed by dc_plane_state_release(), we should free it (on error) under the same scope as where it is created. Signed-off-by: Leo (Sunpeng) Li <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: Remove some unused elements from amdgpu_connector structHarry Wentland1-29/+0
They were used by amdgpu_dm at some point but since it has its own amdgpu_dm_connector now these aren't needed anymore. Signed-off-by: Harry Wentland <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: save/restore backlight level in legacy dce codeAlex Deucher7-2/+40
Save/restore the backlight level scratch register in S3/S4 so the backlight level comes back at the previously requested level. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=199047 Fixes: 4ec6ecf48c64d (drm/amdgpu: drop scratch regs save and restore from S3/S4 handling) Acked-by: Michel Dänzer <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/radeon: fix prime teardown orderChristian König2-2/+2
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the hardware was done with the buffere. Signed-off-by: Christian König <[email protected]> Reviewed-by: Michel Dänzer <[email protected]> CC: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: fix prime teardown orderChristian König2-2/+2
We unmapped imported DMA-bufs when the GEM handle was dropped, not when the hardware was done with the buffere. Signed-off-by: Christian König <[email protected]> Reviewed-by: Michel Dänzer <[email protected]> CC: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: explicit give BO type to amdgpu_bo_createChristian König12-66/+60
Drop the "kernel" and sg parameter and give the BO type to create explicit to amdgpu_bo_create instead of figuring it out from the parameters. Signed-off-by: Christian König <[email protected]> Reviewed-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: initial validate the prime BOs into the CPU domainChristian König1-1/+3
Just set the GTT domain as mandatory, so that the BO is validated into it on first use. This allows us to setup the sg table later on. Signed-off-by: Christian König <[email protected]> Acked-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: drop the backing store when DMA-buf imports are evictedChristian König1-0/+6
Instead of moving this to the SYSTEM domain just drop the backing store and let the resulting allocation be freed. Signed-off-by: Christian König <[email protected]> Acked-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/ttm: move initializing ttm->sg into ttm_tt_init_fieldsChristian König1-3/+1
Better to set this with all other fields as well. Signed-off-by: Christian König <[email protected]> Reviewed-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/ttm: add bo as parameter to the ttm_tt_create callbackChristian König18-87/+75
Instead of calculating the size in bytes just to recalculate the number of pages from it pass the BO directly to the function. Signed-off-by: Christian König <[email protected]> Reviewed-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/ttm: add ttm_bo_pipeline_guttingChristian König3-3/+45
Allows us to gut a BO of it's backing store when the driver says that it isn't needed any more. Signed-off-by: Christian König <[email protected]> Acked-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: refactoring mailbox to fix TDR handshake bugs(v2)Monk Liu2-94/+109
this patch actually refactor mailbox implmentations, and all below changes are needed together to fix all those mailbox handshake issues exposured by heavey TDR test. 1)refactor all mailbox functions based on byte accessing for mb_control reason is to avoid touching non-related bits when writing trn/rcv part of mailbox_control, this way some incorrect INTR sent to hypervisor side could be avoided, and it fixes couple handshake bug. 2)trans_msg function re-impled: put a invalid logic before transmitting message to make sure the ACK bit is in a clear status, otherwise there is chance that ACK asserted already before transmitting message and lead to fake ACK polling. (hypervisor side have some tricks to workaround ACK bit being corrupted by VF FLR which hase an side effects that may make guest side ACK bit asserted wrongly), and clear TRANS_MSG words after message transferred. 3)for mailbox_flr_work, it is also re-worked: it takes the mutex lock first if invoked, to block gpu recover's participate too early while hypervisor side is doing VF FLR. (hypervisor sends FLR_NOTIFY to guest before doing VF FLR and sentds FLR_COMPLETE after VF FLR done, and the FLR_NOTIFY will trigger interrupt to guest which lead to mailbox_flr_work being invoked) This can avoid the issue that mailbox trans msg being cleared by its VF FLR. 4)for mailbox_rcv_irq IRQ routine, it should only peek msg and schedule mailbox_flr_work, instead of ACK to hypervisor itself, because FLR_NOTIFY msg sent from hypervisor side doesn't need VF's ACK (this is because VF's ACK would lead to hypervisor clear its trans_valid/msg, and this would cause handshake bug if trans_valid/msg is cleared not due to correct VF ACK but from a wrong VF ACK like this "FLR_NOTIFY" one) This fixed handshake bug that sometimes GUEST always couldn't receive "READY_TO_ACCESS_GPU" msg from hypervisor. 5)seperate polling time limite accordingly: POLL ACK cost no more than 500ms POLL MSG cost no more than 12000ms POLL FLR finish cost no more than 500ms 6) we still need to set adev into in_gpu_reset mode after we received FLR_NOTIFY from host side, this can prevent innocent app wrongly succesed to open amdgpu dri device. FLR_NOFITY is received due to an IDLE hang detected from hypervisor side which indicating GPU is already die in this VF. v2: use MACRO as the offset of mailbox_control register don't test if NOTIFY_CMPL event in rcv_msg since it won't recieve that message anymore Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Pixel Ding <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: implement mmio byte access helper for MBMonk Liu2-0/+32
mailbox registers can be accessed with a byte boundry according to BIF team, so this patch prepares register byte access and will be used by following patches. Actually, for mailbox registers once the byte field is touched even not changed, the mailbox behaves, so we need the byte width accessing to those sort of regs. Signed-off-by: Monk Liu <[email protected]> Reviewed-by: Pixel Ding <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: query vram type from atombiosHawking Zhang4-7/+94
The vram type for dGPU is stored in umc_info while sys mem type for APU is stored in integratedsysteminfo Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amd/amdgpu: Add missing "DDR4" labelTom St Denis1-1/+2
The commit d296278fd372003fc69588acfd0c0c5edbdf4874 added support for detecting DDR4 but omitted the label that is printed out in amdgpu_bo_init() resulting in a KASAN error. Signed-off-by: Tom St Denis <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: Correct the amdgpu_ucode_fini_bo place for TongaEmily Deng2-3/+3
The amdgpu_ucode_fini_bo should be called after gfx_v8_0_hw_fini, or it will have KCQ disable failed issue. For Tonga, as it firstly finishes SMC block, and the SMC hw fini will call amdgpu_ucode_fini, which will lead the amdgpu_ucode_fini_bo called before gfx_v8_0_hw_fini, this is incorrect. Signed-off-by: Emily Deng <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: Correct the place of amdgpu_pm_sysfs_finiEmily Deng1-1/+1
The amdgpu_pm_sysfs_fini should call before amdgpu_device_ip_fini, or the adev->pm.dpm_enabled would be set to 0, then the device files related to pp won't be removed by amdgpu_pm_sysfs_fini when unload driver. Signed-off-by: Emily Deng <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/amdgpu: stop allocating a page array for prime shared BOsChristian König2-3/+4
We don't need the page array for prime shared BOs, stop allocating it. Signed-off-by: Christian König <[email protected]> Reviewed-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/ttm: add ttm_sg_tt_initChristian König2-9/+47
This allows drivers to only allocate dma addresses, but not a page array. Signed-off-by: Christian König <[email protected]> Reviewed-by: Roger He <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/ttm: move ttm_tt defines into ttm_tt.hChristian König3-242/+273
Let's stop mangling everything in a single header and create one header per object instead. Signed-off-by: Christian König <[email protected]> Reviewed-by: Roger He <[email protected]> Acked-by: Michel Dänzer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-14drm/vmwgfx: replace drm_*_unreference with drm_*_putHaneen Mohammed2-3/+3
This patch replace instances of drm_framebuffer_unreference with _put() suffix, because it is shorter and consistent with the kernel use of *_get/put() suffixes. This was done with the following Coccinelle script: @r@ expression e; @@ ( -drm_framebuffer_reference(e); +drm_framebuffer_get(e); | -drm_framebuffer_unreference(e); +drm_framebuffer_put(e); ) Signed-off-by: Haneen Mohammed <[email protected]> Acked-by: Sinclair Yeh <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20180311233313.GA19721@Haneen
2018-03-14drm/rockchip: Don't use spin_lock_irqsave in interrupt contextMarc Zyngier1-6/+4
The rockchip DRM driver is quite careful to disable interrupts when taking a lock that is also taken in interrupt context, which is a good thing. What is a bit over the top is to use spin_lock_irqsave when already in interrupt context, as you cannot take another interrupt again, and disabling interrupt is just pure overhead. Switching to the non _irqsave version in interrupt context is more logical, and less heavy handed. Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-14drm/rockchip: Do not use memcpy for MMIO addressesMarc Zyngier1-4/+7
memcpy is only meant to be used for memory, and only that. MMIO accessors should be used to access MMIO regions, preferably the ones that correspond to the size of the register accessed. Let's convert the bulk register copy to writel/readl_relaxed, which is the correct API. Signed-off-by: Marc Zyngier <[email protected]> Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-14drm/rockchip: Clear all interrupts before requesting the IRQMarc Zyngier1-11/+12
Calling request_irq() followed by disable_irq() is usually a bad idea, specially if the interrupt can be pending, and you're not yet in a position to handle it. This is exactly what happens on my kevin system when rebooting in a second kernel using kexec: Some interrupt is left pending from the previous kernel, and we take it too early, before disable_irq() could do anything. Let's clear the pending interrupts as we initialize the HW, and move the interrupt request after that point. This ensures that we're in a sane state when the interrupt is requested. Cc: [email protected] Signed-off-by: Marc Zyngier <[email protected]> [adapted to recent rockchip-drm changes] Signed-off-by: Heiko Stuebner <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-14drm: mali-dp: Add YUV->RGB conversion support for video layersMihail Atanassov4-17/+90
Internally Mali DP uses an RGB pipeline so video layers that support YUV input buffers need to convert the input data to RGB. The YUV buffers can have various encodings and this patch introduces support for BT.601, BT.709 and BT.2020 encodings, both limited and full ranges. This patch adds support for specifying the color encoding of the input buffers for the planes that are backed by the video layers and programs the YUV2RGB coefficients into hardware based on the selected encoding. Signed-off-by: Mihail Atanassov <[email protected]> [updated to use standard properties] Signed-off-by: Liviu Dudau <[email protected]>
2018-03-14drm: mali-dp: Turn off CRTC vblank when removing module.Liviu Dudau1-0/+2
When unbinding the mali-dp driver the drm_vblank_cleanup() function warns us that the vblanks are still enabled. Fix that by calling drm_crtc_vblank_off() in the malidp_unbind() function. Signed-off-by: Liviu Dudau <[email protected]>
2018-03-14drm: arm: malidp: Use drm_atomic_helper_shutdown() to disable planes on removalLaurent Pinchart2-4/+1
The plane cleanup handler currently calls drm_plane_helper_disable(), which is a legacy helper function. Replace it with a call to drm_atomic_helper_shutdown() at removal time. Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Liviu Dudau <[email protected]>
2018-03-14drm: arm: malidp: Don't destroy planes manually in error handlersLaurent Pinchart4-22/+3
The top-level error handler calls drm_mode_config_cleanup() which will destroy all planes. There's no need to destroy them manually in lower error handlers. As plane cleanup is now handled entirely by drm_mode_config_cleanup(), we must ensure that the plane .destroy() handler frees allocated memory for the plane object that was freed by malidp_de_planes_destroy(). Do so by replacing the call to devm_kfree() in the .destroy() handler by kfree(). devm_kfree() is currently a no-op as the plane memory is allocated with kzalloc(), not devm_kzalloc(). Signed-off-by: Laurent Pinchart <[email protected]> Signed-off-by: Liviu Dudau <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.