aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-09-20clk: at91: sckc: optimize boot timeAlexandre Belloni1-1/+1
Assume that if the oscillator is enabled (OSC32EN bit is present), the delay has already elapsed as the bootloader probably waited for the oscillator to settle. This could waste up to 1.2s. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20clk: at91: Add sama5d4 sckc supportAlexandre Belloni2-1/+102
Starting with sama5d4, the crystal oscillator is always enabled at startup and the SCKC doesn't have an OSC32EN bit anymore. Add support for that new controller. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20clk: at91: move slow clock controller clocks to sckc.cAlexandre Belloni3-388/+363
Move all clocks related to the slow clock controller to sckc.c. This avoids extern definitions and allows to remove sckc.h Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> [sboyd@codeaurora.org: Mark some functions static] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20clk: imx6: initialize GPU clocksLucas Stach1-0/+18
Initialize the GPU clock muxes to sane inputs. Until now they have not been changed from their default values, which means that both GPU3D shader and GPU2D core were fed by clock inputs whose rates exceed the maximium allowed frequency of the cores by as much as 200MHz. This fixes a severe GPU stability issue on i.MX6DL. Cc: stable@vger.kernel.org Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20clk: imx6: fix i.MX6DL clock tree to reflect realityLucas Stach2-13/+19
The current clock tree only implements the minimal set of differences between the i.MX6Q and the i.MX6DL, but that doesn't really reflect reality. Apply the following fixes to match the RM: - DL has no GPU3D_SHADER_SEL/PODF, the shader domain is clocked by GPU3D_CORE - GPU3D_SHADER_SEL/PODF has been repurposed as GPU2D_CORE_SEL/PODF - GPU2D_CORE_SEL/PODF has been repurposed as MLB_SEL/PODF Cc: stable@vger.kernel.org Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-20clk: imx53: Add clocks configurationKalle Kankare2-1/+34
Add clocks configuration for CSI, FIRI and IEEE1588. Signed-off-by: Fabien Lahoudere <fabien.lahoudere@collabora.co.uk> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: uniphier: add clock data for UniPhier SoCsMasahiro Yamada7-0/+550
Add clock data arrays for all UniPhier SoCs with a binding document. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: uniphier: add core support code for UniPhier clock driverMasahiro Yamada11-0/+536
This includes UniPhier clock driver code, except SoC-specific data arrays. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: bcm: Add driver for BCM53573 ILP clockRafał Miłecki3-0/+185
This clock is present on BCM53573 devices (including BCM47189) that use Cortex-A7. ILP is a part of PMU (Power Management Unit) multi-function device so we use syscon (and regmap) for it. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Rob Herring <robh@kernel.org> [sboyd@codeaurora.org: Remove 0 from clk_init_data to silence sparse] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: Add USB3 PHY reset linesVivek Gautam2-0/+4
Adding missing reset lines for USB 3.0 PHY. Signed-off-by: Vivek Gautam <vivek.gautam@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: zx: fix pointer case warningsArnd Bergmann1-10/+10
The zx296718 clock driver has a creative way of assigning the register values for each clock, by initializing an __iomem pointer to an offset and then later adding the base (from ioremap) on top with a cast to u64. This fail on all 32-bit architectures during compile testing: drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init': drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] zx296718_pll_clk[i].reg_base += (u64)reg_base; drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast] It would be nice to avoid all the casts, but I decided to simply shut up the warnings by changing the type from u64 to uintptr_t, which does the right thing in practice. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: ca0233285a93 ("clk: zx: register ZX296718 clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk/Renesas-MSTP: Use kmalloc_array() in cpg_mstp_clocks_init()Markus Elfring1-1/+1
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: zx296718: use builtin_platform_driver to simplify the codeWei Yongjun1-5/+1
Use the builtin_platform_driver() macro to make the code simpler. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: sunxi-ng: sun6i-a31: Fix register offset for mipi-csi clkChen-Yu Tsai1-1/+1
The register offset for the mipi-csi clk is off by 4, a copy paste error from the mipi-dsi clk. Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: sunxi-ng: sun6i-a31: set CLK_SET_RATE_UNGATE for all PLLsChen-Yu Tsai1-10/+10
The PLLs have a "lock" bit in their configuration registers which indicate if the PLL has locked on to the requested clock rate. We check this bit in the .set_rate op. The PLL cannot lock on if it's not running, which might be a false positive (warning). Set the CLK_SET_RATE_UNGATE flag for all PLLs so whenever clk_set_rate is called on them, they get enabled and the "lock" check is really checking the PLL. Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16clk: sunxi-ng: sun6i-a31: Set CLK_SET_RATE_PARENT for display output clocksChen-Yu Tsai1-9/+13
The LCD controller and HDMI controller use the LCDx-CHy and HDMI clocks to generate their dot clocks. To be able to generate a full range of possible clock rates, the parent PLL clock rates should also be changed. Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16drivers: clk: st: Handle clk synchronous mode for video clocksGabriel Fernandez2-2/+37
This patch configures the semi-synchronous mode of the video clocks of clkgenD2. Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16drivers: clk: st: Add clock propagation for audio clocksGabriel Fernandez2-1/+27
This patch allows fine tuning of the quads FS for audio clocks accuracy. Signed-off-by: Olivier Bideau <olivier.bideau@st.com> Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16drivers: clk: st: Add fs660c32 synthesizer algorithmGabriel Fernandez1-69/+111
Use an algorithm instead of a table to compute clocks for fs660c32 synthesizer. During a video playback we need to adjust audio & video frequencies. A table can't cover all HDMI resolutions and audio adjustment. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16drivers: clk: st: Simplify clock binding of STiH4xx platformsGabriel Fernandez7-88/+65
This patch reworks the clock binding to avoid too much detail in DT. Now we have only compatible string per type of clock (remark from Rob https://lkml.org/lkml/2016/5/25/492) Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-16drivers: clk: st: Remove stih415-416 clock supportGabriel Fernandez10-1639/+37
STiH415 and STiH416 platforms are no longer used. these platforms will be deprecated for the next kernel. Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14clk: at91: Migrate to clk_hw based registration and OF APIsStephen Boyd13-199/+277
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers in this driver, allowing us to move closer to a clear split of consumer and provider clk APIs. Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14clk: bcm2835: Migrate to clk_hw based registration and OF APIsStephen Boyd2-55/+58
Now that we have clk_hw based provider APIs to register clks, we can get rid of struct clk pointers while registering clks in these drivers, allowing us to move closer to a clear split of consumer and provider clk APIs. Cc: Eric Anholt <eric@anholt.net> Cc: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
2016-09-14clk: iproc: Make clocks visible optionsJon Mason3-6/+32
Make the clocks visible options that can be selected by anyone. This avoids the problems of: 1) Select is a reverse dependency and is hard for people to understand and can sometimes be a pain to track down 2) Build coverage goes down because configs are hidden 3) Code bloat Patch suggested by Stephen Boyd Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14clk: xgene: Add PMD clockHoan Tran1-0/+221
Add X-Gene PMD clock support. PMD clock is implemented for a single register field. Output rate = parent_rate * (denominator - scale) / denominator with - denominator = bitmask of register field + 1 - scale = values of register field For example, for bitmask is 0x7, denominator will be 8 and scale will be computed and programmed accordingly. Signed-off-by: Hoan Tran <hotran@apm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14Documentation: dt: xgene: Add PMD clock bindingHoan Tran1-0/+18
Add APM X-Gene clock binding documentation for PMD clock. Signed-off-by: Hoan Tran <hotran@apm.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14Merge branch 'clk-zte' into clk-nextStephen Boyd0-0/+0
* clk-zte: clk: zx: register ZX296718 clocks clk: zx: reform pll config info to ease code extension
2016-09-14clk: zx: register ZX296718 clocksJun Nie5-0/+1248
The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14clk: zx: reform pll config info to ease code extensionJun Nie2-9/+16
Add power down bit and pll lock bit in pll config structure to ease new SoC support. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14clk: zx: register ZX296718 clocksJun Nie5-0/+1248
The ZX296718 clocks are statically listed and registered. More clock will be added later. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14clk: zx: reform pll config info to ease code extensionJun Nie2-9/+16
Add power down bit and pll lock bit in pll config structure to ease new SoC support. Signed-off-by: Jun Nie <jun.nie@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14clk-kona-setup: Use kmalloc_array() in parent_process()Markus Elfring1-2/+2
A multiplication for the size determination of a memory allocation indicated that an array data structure should be processed. Thus use the corresponding function "kmalloc_array". This issue was detected by using the Coccinelle software. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Alex Elder <elder@linaro.org> [sboyd@codeaurora.org: Save a line] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14ARM: clk-imx35: annotate clk enum with number valuesUwe Kleine-König1-14/+16
This helps to decode error messages like: [ 0.000000] i.MX clk 82: register failed with -17 Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14ARM: clk-imx35: fix name for ckil clkUwe Kleine-König1-1/+1
This fixes [ 0.000000] i.MX clk 82: register failed with -17 because the name is duplicated. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Fixes: 3713e3f5e927 ("clk: imx35: define two clocks for rtc") Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14clk: meson: fix CLKID_GCLK_VENCI_INT typoArnd Bergmann1-1/+1
The addition of many gate clocks added two entries in an array for the same value: drivers/clk/meson/meson8b.c:479:10: error: initialized field overwritten [-Werror=override-init] [CLKID_GCLK_VENCI_INT] = &meson8b_gclk_venci_int.hw, [CLKID_GCLK_VENCI_INT] = &meson8b_gclk_vencp_int.hw, This was clearly an accident, and since all other identifiers are listed in the order in which they are defined, I'm changing the first one to CLKID_GCLK_VENCI_INT0, making it all consistent again. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: e31a1900c1ff ("meson: clk: Add support for clock gates") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14clk: mmp: add missing header dependenciesBaoyou Xie1-0/+1
We get 1 warning when building kernel with W=1: drivers/clk/mmp/clk-mmp2.c:75:13: warning: no previous prototype for 'mmp2_clk_init' [-Wmissing-prototypes] In fact, this function is declared in linux/clk/mmp.h, so this patch add missing header dependencies. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14Merge tag 'clk-renesas-for-v4.9-tag3' of ↵Stephen Boyd3-2/+32
git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next Pull renesas clk driver updates from Geert Uytterhoeven: - External crystal selection for RZ/A1, - CMT clocks for R-Car H3 and M3-W, - RAVB and Thermal clocks for R-Car M3-W. * tag 'clk-renesas-for-v4.9-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers: clk: renesas: r8a7796: Add CMT clocks clk: renesas: r8a7795: Add CMT clocks clk: renesas: r8a7796: Add RAVB clock clk: renesas: r8a7796: Add THS/TSC clock clk: renesas: rz: Select EXTAL vs USB clock
2016-09-14meson: clk: Use builtin_platform_driver to simplify the codeWei Yongjun1-5/+1
Use the builtin_platform_driver() macro to make the code simpler. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2016-09-14Merge tag 'sunxi-clk-for-4.9' of ↵Stephen Boyd24-79/+3860
https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-next Pull Allwinner clock driver changes from Maxime Ripard: Four more SoCs converted to the new clock framework (A31, A31s, A23 and A33). * tag 'sunxi-clk-for-4.9' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: clk: sunxi-ng: Add hardware dependency clk: sunxi-ng: Add A23 CCU clk: sunxi-ng: Add A33 CCU support clk: sunxi-ng: Add N-class clocks support clk: sunxi-ng: mux: Add mux table macro clk: sunxi-ng: div: Allow to set a maximum clk: sunxi-ng: div: Add kerneldoc for the _ccu_div structure clk: sunxi-ng: div: Add mux table macros clk: sunxi-ng: Add A31/A31s clocks clk: sunxi-ng: mux: Add clk notifier functions clk: sunxi-ng: mux: support fixed pre-dividers on multiple parents clk: sunxi-ng: mux: Add support for mux tables clk: sunxi-ng: mux: Rename mux macro to be consistent clk: sunxi-ng: nkm: Add mux to support multiple parents clk: sunxi-ng: mux: Increase fixed pre-divider div size
2016-09-14Merge tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung into ↵Stephen Boyd13-288/+453
clk-next Pull samsung clk driver updates from Sylwester Nawrocki: In addition to a few clean up and code consolidation patches this includes: - addition of sound subsystem related clocks for Exynos5410 SoC (EPLL, PDMA) and support for "samsung,exynos5410-audss-clock" compatible in the clk-exynos-audss driver, - addition of DRAM controller related clocks for exynos5420, - MAINTAINERS update adding Chanwoo Choi as the Samsung SoC clock drivers co-maintainer. * tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung: clk: samsung: Add support for EPLL on exynos5410 clk: samsung: clk-exynos-audss: Whitespace and debug trace cleanup clk: samsung: clk-exynos-audss: Add exynos5410 compatible clk: samsung: clk-exynos-audss: controller variant handling rework clk: samsung: Use common registration function for pll2550x clk: samsung: exynos5410: Expose the peripheral DMA gate clocks clk: samsung: exynos5420: Add clocks for CMU_CDREX domain clk: samsung: exynos5410: Use samsung_cmu_register_one() to simplify code clk: samsung: exynos5260: Move struct samsung_cmu_info to init section MAINTAINERS: Add myself as Samsung SoC clock drivers co-maintainer clk: samsung: exynos5410: Add clock IDs for PDMA and EPLL clocks clk: samsung: Add clock IDs for the CMU_CDREX (DRAM Express Controller)
2016-09-12clk: renesas: r8a7796: Add CMT clocksBui Duc Phuc1-0/+4
This patch adds CMT module clocks for r8a7796 SoC. Signed-off-by: Bui Duc Phuc <bd-phuc@jinso.co.jp> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-09-12clk: renesas: r8a7795: Add CMT clocksBui Duc Phuc1-0/+4
This patch adds CMT module clocks for r8a7795 SoC. Signed-off-by: Bui Duc Phuc <bd-phuc@jinso.co.jp> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-09-12clk: renesas: r8a7796: Add RAVB clockLaurent Pinchart1-0/+1
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2016-09-10clk: sunxi-ng: Add hardware dependencyJean Delvare1-0/+1
The sunxi-ng clock driver is useless for other architectures. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
2016-09-10clk: sunxi-ng: Add A23 CCUMaxime Ripard4-0/+751
Add support for the clock unit found in the A23. Due to the similarities with the A33, it also shares its clock IDs to allow sharing the DTSI. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-10clk: sunxi-ng: Add A33 CCU supportMaxime Ripard7-0/+1071
This commit introduces the clocks found in the Allwinner A33 CCU. Since this SoC is very similar to the A23, and we share a significant share of the DTSI, the clock IDs that are going to be used will also be shared with the A23, hence the name of the various header files. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-10clk: sunxi-ng: Add N-class clocks supportMaxime Ripard4-0/+173
Add support for the class with a single factor, N, being a multiplier. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-10clk: sunxi-ng: mux: Add mux table macroMaxime Ripard1-13/+13
Add a new macro to declare muxes based on a table and a gate. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-10clk: sunxi-ng: div: Allow to set a maximumMaxime Ripard5-33/+55
Some dividers might have a maximum value that is lower than the width of the register. Add a field to _ccu_div to handle those case properly. If the field is set to 0, the code will assume that the maximum value is the maximum one that can be used with the field register width. Otherwise, we'll use whatever value has been set. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
2016-09-10clk: sunxi-ng: div: Add kerneldoc for the _ccu_div structureMaxime Ripard1-0/+14
The internal _ccu_div structure is meant to be embedded into other structures to combine the various dividers and to form the clock classes support. Start to document those structures by using kerneldoc. Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Powered by cgit, Gruvboxed by Blaster4385.