| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
into drm-next
Just some misc bug fixes for 4.9.
* 'drm-next-4.9' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: revert "use more than 64KB fragment size if possible"
drm/amdgpu: warn if dp aux is still attached on free
drm/amdgpu/dce11: add missing drm_mode_config_cleanup call
drm/amdgpu: also track late init state
drm/amdgpu/virtual_dce: adjust config ifdef
drm/amdgpu/vce: add support for hw config packet (v2)
drm/amdgpu: clean up to set fw_offset as 0 twice
drm/amdgpu: remove DRM_AMD_POWERPLAY
drm/radeon: Prevent races on pre DCE4 between flip submission and completion.
drm/radeon: Slightly more robust flip completion handling for < DCE-4
|
|
git://anongit.freedesktop.org/drm-intel into drm-next
Another attempt, this time rebased and without the pipe crc patches:
- display_info cleanups from Ville
- make prime/gem lookups faster with rbtrees (Chris)
- misc stuff all over
* tag 'topic/drm-misc-2016-10-05' of git://anongit.freedesktop.org/drm-intel:
drm/rockchip: analogix_dp: Refuse to enable PSR if panel doesn't support it
drm/bridge: analogix_dp: Add analogix_dp_psr_supported
drm/fb-helper: add DRM_FB_HELPER_DEFAULT_OPS for fb_ops
drm: Document caveats around atomic event handling
uapi: add missing install of sync_file.h
drm: Simplify drm_printk to reduce object size quite a bit
drm/i915: Account for sink max TMDS clock when checking the port clock
drm/i915: Replace a bunch of connector->base.display_info with a local variable
drm/edid: Move dvi_dual/max_tmds_clock parsing out from drm_edid_to_eld()
drm/edid: Clear the old cea_rev when there's no CEA extension in the new EDID
drm/edid: Reduce the number of times we parse the CEA extension block
drm/edid: Don't pass around drm_display_info needlessly
drm/edid: Move dvi_dual/max_tmds_clock to drm_display_info
drm/edid: Make max_tmds_clock kHz instead of MHz
drm/edid: Clear old dvi_dual/max_tmds_clock before parsing the new EDID
drm/edid: Clear old audio latency values before parsing the new EDID
drm: Convert prime dma-buf <-> handle to rbtree
drm/mediatek: mark symbols static where possible
drm/rockchip: mark symbols static where possible
drm/rockchip: add missing header dependencies
|
|
drm-next
This pull request brings in several fixes for drm-next, mostly for
HDMI.
* tag 'drm-vc4-next-2016-10-06' of https://github.com/anholt/linux:
drm/vc4: Add support for double-clocked modes.
drm/vc4: Set up the AVI and SPD infoframes.
drm/vc4: Fix support for interlaced modes on HDMI.
drm/vc4: Increase timeout for HDMI_SCHEDULER_CONTROL changes.
drm/vc4: Fall back to using an EDID probe in the absence of a GPIO.
drm/vc4: Enable limited range RGB output on HDMI with CEA modes.
drm/vc4: Fix races when the CS reads from render targets.
drm/vc4: cleanup with list_first_entry_or_null()
|
|
Some boards have an entirely passive RGB to VGA bridge, based on DACs
implemented by resistor ladders.
Those might or might not have an i2c bus routed to the VGA connector in
order to access the screen EDIDs.
Add a bridge that doesn't do anything but expose the modes available on the
screen, either based on the EDIDs if available, or based on the XGA
standards.
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Tested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20160930143709.1388-3-maxime.ripard@free-electrons.com
|
|
We reserve space in the GuC workqueue for submitting the request in the
future. However, if we fail to construct the request, we need to give
that reserved space back to the system.
Fixes: dadd481bfe55 ("drm/i915/guc: Prepare for nonblocking execbuf submission")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97978
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-4-chris@chris-wilson.co.uk
|
|
Along with the interrupt, we want to restore the fake-irq and
wait-timeout detection. If we use the breadcrumbs interface to setup the
interrupt as it wants, the auxiliary timers will also be restored.
v2: Cancel both timers as well, sanitize the IMR.
Fixes: 821ed7df6e2a ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-3-chris@chris-wilson.co.uk
|
|
If we run out of enough aperture space to fit the entire object, we
fallback to trying to insert a single page. However, if that also fails,
we currently fail to userspace with an unexpected ENOSPC. (ENOSPC means
to userspace that their batch could not be fitted within the GTT.) Prior
to commit e8cb909ac3ab ("drm/i915: Fallback to single page GTT
mmappings for relocations") the approach is to fallback to using the
slow CPU relocation path in case of iomapping failure, and that is the
behaviour we need to restore.
Fixes: e8cb909ac3ab ("drm/i915: Fallback to single page GTT mmappings...")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98101
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-2-chris@chris-wilson.co.uk
|
|
In order not to trigger hangcheck on a idle-but-waiting engine, we need
to distinguish between the pending request queue and the actual
execution queue. This is done later in "drm/i915: Enable multiple
timelines" but for now we need a temporary fix to prevent blaming the
wrong engine for a GPU hang.
(Note that this causes a temporary subtle change in how we decide when
to allow a waitboost to be re-awarded back to the waiter, the temporary
effect is that if the wait is upon the most current execution the wait
is given for free, instead of checking to see if the client stalled
itself. This will be repaired in "drm/i915: Enable multiple timelines".)
Fixes: 0a046a0e93d2 ("drm/i915: Nonblocking request submission")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98104
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161007065327.24515-1-chris@chris-wilson.co.uk
|
|
Now that we have infoframes to report the pixel repeat flag, we can
start using it. Fixes locking the 720x480i and 720x576i modes on my
Dell 2408WFP. Like the 1920x1080i case, they don't fit properly on
the screen, though.
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
Fixes a purple bar on the left side of the screen with my Dell
2408WFP. It will also be required for supporting the double-clocked
video modes.
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
We really do need to be using the halved V fields. I had been
confused by the code I was using as a reference because it stored
halved vsync fields but not halved vdisplay, so it looked like I only
needed to divide vdisplay by 2.
This reverts part of Mario's timestamping fixes that prevented
CRTC_HALVE_V from applying, and instead adjusts the timestamping code
to not use the crtc field in that case.
Fixes locking of 1920x1080x60i on my Dell 2408WFP. There are black
bars on the top and bottom, but I suspect that might be an
under/overscan flags problem as opposed to video timings.
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
Fixes occasional debug spew at boot when connected directly through
HDMI, and probably confusing the HDMI state machine when we go trying
to poke registers for the enable sequence too soon.
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
On Pi0/1/2, we use an external GPIO line for hotplug detection, since
the HDMI_HOTPLUG register isn't connected to anything. However, with
the Pi3 the HPD GPIO line has moved off to a GPIO expander that will
be tricky to get to (the firmware is constantly polling the expander
using i2c0, so we'll need to coordinate with it).
As a stop-gap, if we don't have a GPIO line, use an EDID probe to
detect connection. Fixes HDMI display on the pi3.
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
Fixes broken grayscale ramps on many HDMI monitors, where large areas
at the ends of the ramp would all appear as black or white.
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
With the introduction of bin/render pipelining, the previous job may
not be completed when we start binning the next one. If the previous
job wrote our VBO, IB, or CS textures, then the binning stage might
get stale or uninitialized results.
Fixes the major rendering failure in glmark2 -b terrain.
Signed-off-by: Eric Anholt <eric@anholt.net>
Fixes: ca26d28bbaa3 ("drm/vc4: improve throughput by pipelining binning and rendering jobs")
Cc: stable@vger.kernel.org
|
|
The combo of list_empty() check and return list_first_entry()
can be replaced with list_first_entry_or_null().
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
|
|
This reverts commit 1dcd32fb9c54334ec948a0f18174a748d6b14364.
The block size is indeed an equal match, so this can cause performance regressions.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
If this happens (and it recently did), we free a structure while part of
it is still in use, which results in non-obvious crashes. The way it's
detached is not trivial (DRM core has to call the connector .destroy
callback and things must be torn down in the right order), so better
detect it and warn early.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
All other amdgpu/dce_v* files have this call, it's only mysteriously
missing from dce_v11_0.c since the file was added and causes leaks.
Fixes: aaa36a976bbb ("drm/amdgpu: Add initial VI support")
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
|
|
Successful sw_init() and hw_init() states are tracked, but not
late_init(). Various error paths may result in amdgpu_fini() being
called before .late init is done, so late_init needs to be tracked
to avoid unexpected or multiple .late_fini() calls.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Intel DZ77BH-55K board doest't have a physical VGA connector,
and yet it always detects that something is connected there.
Add it to the DMI blacklist to ignore the spurious detection
results.
Allows me to drop 'video=VGA-1:d' from my kernel cmdline.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474881646-1326-3-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
Having a shadow VGA connector is useful for testing purposes. We
currently skip registering the connector on machines where the
CRT detect falsely reports it as connected. Let's instead move the
the blacklist check to the detect callback (and hpd setup) and
if we get a match we always report the connector as disconnected.
This way we get a shadow VGA connector to help with testing, while
we still avoid the user facing problems from the incorrect
detection results.
commit 8ca4013d702d ("CHROMIUM: i915: Add DMI override to skip CRT
initialization on ZGB") doesn't provide much in the way of details
as to why 'ACER ZGB' was added to the blacklist. Trying to trace it
further leads me to a chromeos bugreport I can't access. So based on
the fact that the commit added the
"/* Skip machines without VGA that falsely report hotplug events */"
comment, I'm going to assume that it was just spurious CRT detection.
So it should be safe to move the blacklist to just block the detection
and hpd without causing a regression on said machine.
In fact Stéphane confirmed on irc that the problem was indeed just
crappy hotplug detect:
"22:29 < marcheu> vsyrjala: the port isn't there, but the load detect is
improperly stubbed in hw
22:29 < marcheu> vsyrjala: so it floats"
so this change should be perfectly fine.
v2: Add irc quote from Stéphane
Cc: Duncan Laurie <dlaurie@chromium.org>
Cc: Olof Johansson <olofj@chromium.org>
Cc: Stéphane Marchesin <marcheu@chromium.org>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474881646-1326-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
This reverts commit 10b6ee4a87811a110cb01eaca01eb04da6801baf.
According to [1] Dell XPS8700 VBT says 'int_crt_support 0', so thanks
to commit e4abb733bb72 ("drm/i915: Check VBT for CRT port presence on
HSW/BDW") we no longer need to blacklist it based on DMI.
Looking through the bug report, SFUSE_STRAP based detection was
apparently also tried and failed, but the VBT based one should still
work just fine.
The commit says that the symptom was a frozen machine, but based on the
bug report it doesn't look like the CRT detection was at least directly
responsible for such a drastic outcome.
Cc: Giacomo Comes <comes@naic.edu>
References: https://bugs.freedesktop.org/show_bug.cgi?id=73559
References: http://lists.freedesktop.org/archives/intel-gfx/2014-January/038178.html [1]
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1474881646-1326-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
|
|
dma_buf may live a long time, longer than the last direct user of the
driver. We already hold a reference to the owner module (that prevents
the object code from disappearing), but there is no reference to the
drm_dev - so the pointers to the driver backend themselves may vanish.
v2: Resist temptation to fix the bug in armada_gem.c not setting the
correct flags on the exported dma-buf (it should pass the flags through
and not be arbitrarily setting O_RDWR).
Use a common wrapper for exporting the dmabuf and acquiring the
reference to the drm_device.
Testcase: igt/vgem_basic/unload
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org
Tested-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161005122145.1507-2-chris@chris-wilson.co.uk
|
|
dma_buf_export() adds a reference to the owning module to the dmabuf (to
prevent the driver from being unloaded whilst a third party still refers
to the dmabuf). However, drm_gem_prime_export() was passing its own
THIS_MODULE (i.e. drm.ko) rather than the driver. Extract the right
owner from the device->fops instead.
v2: Use C99 initializers to zero out unset elements of
dma_buf_export_info
v3: Extract the right module from dev->fops.
Testcase: igt/vgem_basic/unload
Reported-by: Petri Latvala <petri.latvala@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Petri Latvala <petri.latvala@intel.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org
Tested-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Petri Latvala <petri.latvala@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161005122145.1507-1-chris@chris-wilson.co.uk
|
|
Remove the unnecessary wrapper functions around drm_connector_cleanup().
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004222331.7200-1-marex@denx.de
|
|
Add .prepare_fb and .cleanup_fb plane hooks into the drm_simple_kms.
These can be used by drivers to call ie. the drm_fb_cma_setup_fence()
helper.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161002170124.6099-1-marex@denx.de
|
|
We should use 'ida_simple_remove()' instead of 'ida_remove()' when freeing
resources allocated with 'ida_simple_get()'.
This as been spotted with the following coccinelle script which tries to
detect missing 'ida_simple_remove()' call in error handling paths.
///////////////
@@
expression x;
identifier l;
@@
* x = ida_simple_get(...);
...
if (...) {
...
}
...
if (...) {
...
goto l;
}
...
* l: ... when != ida_simple_remove(...);
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1475388082-12656-1-git-send-email-christophe.jaillet@wanadoo.fr
|
|
Sort DEV_INFO_FOR_EACH_FLAG to alphabetical order (except is_*).
v2:
- Add comments in the hope of maintaining order (Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475664617-24541-1-git-send-email-joonas.lahtinen@linux.intel.com
|
|
Get rid of SEP_SEMICOLON and SEP_BLANK in DEV_INFO_FOR_EACH_FLAG.
Consolidate the debug output so that instead of one huge line with
"cap1,cap2,capN" each capability is split to own line and displayed
as "capN: [yes|no]" to make the dumps more historically informative.
v2:
- Do not break auto-indent by keeping semicolon after macro (Jani)
- Consolidate and use yesno() in all locations (Chris)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
Allow returning "connected" or "unknown" connector status for DP branch
devices that don't have an EDID. Currently we'd claim the thing as
"disconnected" if there is no EDID.
This stuff used to broken already, I think, but it got more broken by
commit f21a21983ef1 ("drm/i915: Splitting intel_dp_detect")
Cc: Damien Cassou <damien@cassou.me>
Cc: freedesktop.org@gp.mailgun.org
Cc: Arno <blouin.arno@gmail.com>
Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: stable@vger.kernel.org
Tested-by: Arno <blouin.arno@gmail.com>
Fixes: f21a21983ef1 ("drm/i915: Splitting intel_dp_detect")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83348
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475481316-8194-2-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
|
|
We can't rely on connector->status in the detect() hook if the long hpd
was already handled by the dig_port_work as that won't update
connector->status. Thus we have to defer the long hpd handling entirely
until the hotplug work runs to avoid the double long hpd handling
the "detect_done" flag is trying to prevent.
We'll start to depend on connector->status being up to date in a
following patch.
Cc: Damien Cassou <damien@cassou.me>
Cc: freedesktop.org@gp.mailgun.org
Cc: Arno <blouin.arno@gmail.com>
Cc: Shubhangi Shrivastava <shubhangi.shrivastava@intel.com>
Cc: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: stable@vger.kernel.org
Tested-by: Arno <blouin.arno@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=83348
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475481316-8194-1-git-send-email-ville.syrjala@linux.intel.com
Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com>
|
|
It is convenient to know what processes are waiting when looking at
hangcheck status in debugfs.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-8-chris@chris-wilson.co.uk
|
|
Knowing where the RINGs are pointing is extremely useful in diagnosing
if the engines are executing the ringbuffers you expect - and igt may be
suppressing the usual method of looking in the GPU error state.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-7-chris@chris-wilson.co.uk
|
|
Include the position of the active request in the ring, and display that
alongside the current RING registers (on a GPU hang).
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-6-chris@chris-wilson.co.uk
|
|
Check that there was not a late recovery between us declaring the GPU
hung and processing the reset. If the GPU did recover by itself, let the
request remain on the active list and see if it hangs again!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-5-chris@chris-wilson.co.uk
|
|
Whilst we reset the GPU, we want to prevent execlists from submitting
new work (which it does via an interrupt handler). To achieve this we
disable the irq (and drain the irq tasklet) around the reset. When we
enable it again afters, the interrupt queue should be empty and we can
reinitialise from a known state without fear of the tasklet running
concurrently.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-4-chris@chris-wilson.co.uk
|
|
After a GPU reset, we want to replay our queue of requests. However, the
GPU reset clobbered the state and we only fixup the state for the guilty
request - and engines deemed innocent we try to leave untouched so that
we recover as completely as possible. However, we need to clear the sw
tracking of the ELSP ports even for innocent requests, so move the clear
to the common path of init_hw (from reset_hw).
Reported-by: Mika Kuoppala <mika.kuoppala@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-3-chris@chris-wilson.co.uk
|
|
On Braswell, at least, we observe that the context image is written in
multiple phases. The first phase is to clear the register state, and
subsequently rewrite it. A GPU reset at the right moment can interrupt
the context update leaving it corrupt, and our update of the RING_HEAD
is not sufficient to restart the engine afterwards. To recover, we need
to reset the registers back to their original values. The context state
is lost. What we need is a better mechanism to serialise the reset with
pending flushes from the GPU.
Fixes: 821ed7df6e2a ("drm/i915: Update reset path to fix incomplete requests")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-2-chris@chris-wilson.co.uk
|
|
Since both legacy and execlists want to populate the RING_CTL register,
share the computation of the right bits for the ring->size. We can then
stop masking errors and explicitly forbid them during creation!
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161004201132.21801-1-chris@chris-wilson.co.uk
|
|
Include the CIK asics in the ifdef.
Reviewed-By: Emily Deng <Emily.Deng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
This is needed for proper VCE DPM on some APUs.
v2: fix the asic list
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Signed-off-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Powerplay is no longer optional after the recently cleanups
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pre DCE4 hw doesn't have reliable pageflip completion
interrupts, so instead polling for flip completion is
used from within the vblank irq handler to complete
page flips.
This causes a race if pageflip ioctl is called close to
vblank:
1. pageflip ioctl queues execution of radeon_flip_work_func.
2. vblank irq fires, radeon_crtc_handle_vblank checks for
flip_status == FLIP_SUBMITTED finds none, no-ops.
3. radeon_flip_work_func runs inside vblank, decides to
set flip_status == FLIP_SUBMITTED and programs the
flip into hw.
4. hw executes flip immediately (because in vblank), but
as 2 already happened, the flip completion routine only
emits the flip completion event one refresh later ->
wrong vblank count/timestamp for completion and no
performance gain, as instead of delaying the flip until
next vblank, we now delay the next flip by 1 refresh
while waiting for the delayed flip completion event.
Given we often don't gain anything due to this race, but
lose precision, prevent the programmed flip from executing
in vblank on pre DCE4 asics to avoid this race.
On pre-AVIVO hw we can't program the hw for edge-triggered
flips, they always execute anywhere in vblank. Therefore delay
the actual flip programming until after vblank on pre-AVIVO.
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
Pre DCE4 hardware doesn't have (reliable) pageflip completion
irqs, therefore we have to use the old polling method for flip
completion handling in vblank irq.
As vblank irqs fire a bit before start of vblank (when the
linebuffer fifo read position reaches end of scanout), we
have some fudge for flip completion handling in the last
lines of active scanout. Old code assumed the threshold to
be 99% of active scanout height, a ballpark estimate which
worked ok. Since we know since a while how to calculate the
actual threshold from linebuffer size, lets make use of it
to get a more accurate threshold.
This completion path is still prone to some races in corner
cases, especially on pre-AVIVO hardware, so document them
a bit better in the code comments.
Acked-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
|
|
spaces
drivers/gpu/drm/i915/i915_gem_execbuffer.c:432:52: warning: incorrect type in argument 1 (different address spaces)
drivers/gpu/drm/i915/i915_gem_execbuffer.c:432:52: expected void [noderef] <asn:2>*vaddr
drivers/gpu/drm/i915/i915_gem_execbuffer.c:432:52: got void *
drivers/gpu/drm/i915/i915_gem_execbuffer.c:477:15: warning: incorrect type in assignment (different address spaces)
drivers/gpu/drm/i915/i915_gem_execbuffer.c:477:15: expected void *vaddr
drivers/gpu/drm/i915/i915_gem_execbuffer.c:477:15: got void [noderef] <asn:2>*
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475574853-4178-2-git-send-email-jani.nikula@intel.com
|
|
Fix sparse warning:
drivers/gpu/drm/i915/intel_pm.c:3970:1: warning: symbol
'skl_ddb_add_affected_planes' was not declared. Should it be static?
Fixes: 7f60e200e254 ("drm/i915/gen9: only add the planes actually affected by ddb changes")
Cc: Lyude <cpaul@redhat.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1475573357-30562-1-git-send-email-jani.nikula@intel.com
|
|
Instead of using bsearch library function make a local generator
macro out of it so the comparison callback can be inlined.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1475569769-31108-1-git-send-email-tvrtko.ursulin@linux.intel.com
|
|
Simply replace the linear search with the kernel's binary
search implementation. There is only six registers currently
in that table so this may not be that interesting. It adds a
function call so hopefully remains performance neutral for now.
v2: No need for manual conversion to bool for return.
(Joonas Lahtinen)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
|