aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-06-27Merge tag 'linux-kselftest-kunit-6.5-rc1' of ↵Linus Torvalds15-95/+539
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit updates from Shuah Khan: - kunit_add_action() API to defer a call until test exit - Update document to add kunit_add_action() usage notes - Changes to always run cleanup from a test kthread - Documentation updates to clarify cleanup usage (assertions should not be used in cleanup) - Documentation update to clearly indicate that exit functions should run even if init fails - Several fixes and enhancements to existing tests * tag 'linux-kselftest-kunit-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: MAINTAINERS: Add source tree entry for kunit Documentation: kunit: Rename references to kunit_abort() kunit: Move kunit_abort() call out of kunit_do_failed_assertion() kunit: Fix obsolete name in documentation headers (func->action) Documentation: Kunit: add MODULE_LICENSE to sample code kunit: Update kunit_print_ok_not_ok function kunit: Fix reporting of the skipped parameterized tests kunit/test: Add example test showing parameterized testing Documentation: kunit: Add usage notes for kunit_add_action() kunit: kmalloc_array: Use kunit_add_action() kunit: executor_test: Use kunit_add_action() kunit: Add kunit_add_action() to defer a call until test exit kunit: example: Provide example exit functions Documentation: kunit: Warn that exit functions run even if init fails Documentation: kunit: Note that assertions should not be used in cleanup kunit: Always run cleanup from a test kthread Documentation: kunit: Modular tests should not depend on KUNIT=y kunit: tool: undo type subscripts for subprocess.Popen
2023-06-27Merge tag 'nolibc.2023.06.22a' of ↵Linus Torvalds23-313/+704
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull nolibc updates from Paul McKenney: - Add stackprotector support - Fix RISC-V load-store instruction syntax to support 32-bit binaries, plus fixes for generic 32-bit support - Fix use of s390 sys_fork() - Add my_syscall6() for ARM - Support different platforms having different errno definitions - Fix ppoll/ppoll_time64 arguments (add the fifth argument) - Force use of little endian on MIPS - Improved testing, for example, better handling of different compilers and compiler versions, comparing nolibc behavior to that of libc, and additional test cases - Improve syntax and header ordering - Use existing <linux/reboot.h> instead of redefining constants - Add syscall() * tag 'nolibc.2023.06.22a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (53 commits) selftests/nolibc: make sure gcc always use little endian on MIPS selftests/nolibc: also count skipped and failed tests in output selftests/nolibc: add new gettimeofday test cases selftests/nolibc: remove gettimeofday_bad1/2 completely selftests/nolibc: support two errnos with EXPECT_SYSER2() tools/nolibc: open: fix up compile warning for arm tools/nolibc: arm: add missing my_syscall6 selftests/nolibc: use INT_MAX instead of __INT_MAX__ selftests/nolibc: not include limits.h for nolibc selftests/nolibc: fix up compile warning with glibc on x86_64 selftests/nolibc: allow specify extra arguments for qemu selftests/nolibc: remove test gettimeofday_null tools/nolibc: ensure fast64 integer types have 64 bits selftests/nolibc: test_fork: fix up duplicated print tools/nolibc: ppoll/ppoll_time64: add a missing argument selftests/nolibc: remove the duplicated gettimeofday_bad2 selftests/nolibc: print name instead of number for EOVERFLOW tools/nolibc: support nanoseconds in stat() selftests/nolibc: prevent coredumps during test execution tools/nolibc: add support for prctl() ...
2023-06-27Merge branch 'af_unix-followup-fixes-for-so_passpidfd'Jakub Kicinski2-13/+30
Kuniyuki Iwashima says: ==================== af_unix: Followup fixes for SO_PASSPIDFD. This series fixes 2 issues introduced by commit 5e2ff6704a27 ("scm: add SO_PASSPIDFD and SCM_PIDFD"). The 1st patch fixes a warning in scm_pidfd_recv() reported by syzkaller. The 2nd patch fixes a regression that bluetooth can't be built as module. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27net: scm: introduce and use scm_recv_unix helperAlexander Mikhalitsyn2-12/+27
Recently, our friends from bluetooth subsystem reported [1] that after commit 5e2ff6704a27 ("scm: add SO_PASSPIDFD and SCM_PIDFD") scm_recv() helper become unusable in kernel modules (because it uses unexported pidfd_prepare() API). We were aware of this issue and workarounded it in a hard way by commit 97154bcf4d1b ("af_unix: Kconfig: make CONFIG_UNIX bool"). But recently a new functionality was added in the scope of commit 817efd3cad74 ("Bluetooth: hci_sock: Forward credentials to monitor") and after that bluetooth can't be compiled as a kernel module. After some discussion in [1] we decided to split scm_recv() into two helpers, one won't support SCM_PIDFD (used for unix sockets), and another one will be completely the same as it was before commit 5e2ff6704a27 ("scm: add SO_PASSPIDFD and SCM_PIDFD"). Link: https://lore.kernel.org/lkml/CAJqdLrpFcga4n7wxBhsFqPQiN8PKFVr6U10fKcJ9W7AcZn+o6Q@mail.gmail.com/ [1] Fixes: 5e2ff6704a27 ("scm: add SO_PASSPIDFD and SCM_PIDFD") Signed-off-by: Alexander Mikhalitsyn <[email protected]> Reviewed-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27af_unix: Skip SCM_PIDFD if scm->pid is NULL.Kuniyuki Iwashima1-1/+3
syzkaller hit a WARN_ON_ONCE(!scm->pid) in scm_pidfd_recv(). In unix_stream_read_generic(), if there is no skb in the queue, we could bail out the do-while loop without calling scm_set_cred(): 1. No skb in the queue 2. sk is non-blocking or shutdown(sk, RCV_SHUTDOWN) is called concurrently or peer calls close() If the socket is configured with SO_PASSPIDFD, scm_pidfd_recv() would populate cmsg with garbage emitting the warning. Let's skip SCM_PIDFD if scm->pid is NULL in scm_pidfd_recv(). Note another way would be skip calling scm_recv() in such cases, but this caused a regression resulting in commit 9d797ee2dce1 ("Revert "af_unix: Call scm_recv() only after scm_set_cred().""). WARNING: CPU: 1 PID: 3245 at include/net/scm.h:138 scm_pidfd_recv include/net/scm.h:138 [inline] WARNING: CPU: 1 PID: 3245 at include/net/scm.h:138 scm_recv.constprop.0+0x754/0x850 include/net/scm.h:177 Modules linked in: CPU: 1 PID: 3245 Comm: syz-executor.1 Not tainted 6.4.0-rc5-01219-gfa0e21fa4443 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.0-0-gd239552ce722-prebuilt.qemu.org 04/01/2014 RIP: 0010:scm_pidfd_recv include/net/scm.h:138 [inline] RIP: 0010:scm_recv.constprop.0+0x754/0x850 include/net/scm.h:177 Code: 67 fd e9 55 fd ff ff e8 4a 70 67 fd e9 7f fd ff ff e8 40 70 67 fd e9 3e fb ff ff e8 36 70 67 fd e9 02 fd ff ff e8 8c 3a 20 fd <0f> 0b e9 fe fb ff ff e8 50 70 67 fd e9 2e f9 ff ff e8 46 70 67 fd RSP: 0018:ffffc90009af7660 EFLAGS: 00010216 RAX: 00000000000000a1 RBX: ffff888041e58a80 RCX: ffffc90003852000 RDX: 0000000000040000 RSI: ffffffff842675b4 RDI: 0000000000000007 RBP: ffffc90009af7810 R08: 0000000000000007 R09: 0000000000000013 R10: 00000000000000f8 R11: 0000000000000001 R12: ffffc90009af7db0 R13: 0000000000000000 R14: ffff888041e58a88 R15: 1ffff9200135eecc FS: 00007f6b7113f640(0000) GS:ffff88806cf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6b7111de38 CR3: 0000000012a6e002 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: <TASK> unix_stream_read_generic+0x5fe/0x1f50 net/unix/af_unix.c:2830 unix_stream_recvmsg+0x194/0x1c0 net/unix/af_unix.c:2880 sock_recvmsg_nosec net/socket.c:1019 [inline] sock_recvmsg+0x188/0x1d0 net/socket.c:1040 ____sys_recvmsg+0x210/0x610 net/socket.c:2712 ___sys_recvmsg+0xff/0x190 net/socket.c:2754 do_recvmmsg+0x25d/0x6c0 net/socket.c:2848 __sys_recvmmsg net/socket.c:2927 [inline] __do_sys_recvmmsg net/socket.c:2950 [inline] __se_sys_recvmmsg net/socket.c:2943 [inline] __x64_sys_recvmmsg+0x224/0x290 net/socket.c:2943 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3f/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f6b71da2e5d Code: ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 73 9f 1b 00 f7 d8 64 89 01 48 RSP: 002b:00007f6b7113ecc8 EFLAGS: 00000246 ORIG_RAX: 000000000000012b RAX: ffffffffffffffda RBX: 00000000004bc050 RCX: 00007f6b71da2e5d RDX: 0000000000000007 RSI: 0000000020006600 RDI: 000000000000000b RBP: 00000000004bc050 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000120 R11: 0000000000000246 R12: 0000000000000000 R13: 000000000000006e R14: 00007f6b71e03530 R15: 0000000000000000 </TASK> Fixes: 5e2ff6704a27 ("scm: add SO_PASSPIDFD and SCM_PIDFD") Reported-by: syzkaller <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27Merge tag 'rcu.2023.06.22a' of ↵Linus Torvalds20-333/+403
git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu Pull RCU updates from Paul McKenney: "Documentation updates Miscellaneous fixes, perhaps most notably: - Remove RCU_NONIDLE(). The new visibility of most of the idle loop to RCU has obsoleted this API. - Make the RCU_SOFTIRQ callback-invocation time limit also apply to the rcuc kthreads that invoke callbacks for CONFIG_PREEMPT_RT. - Add a jiffies-based callback-invocation time limit to handle long-running callbacks. (The local_clock() function is only invoked once per 32 callbacks due to its high overhead.) - Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs, which fixes a bug that can occur on systems with non-contiguous CPU numbering. kvfree_rcu updates: - Eliminate the single-argument variant of k[v]free_rcu() now that all uses have been converted to k[v]free_rcu_mightsleep(). - Add WARN_ON_ONCE() checks for k[v]free_rcu*() freeing callbacks too soon. Yes, this is closing the barn door after the horse has escaped, but Murphy says that there will be more horses. Callback-offloading updates: - Fix a number of bugs involving the shrinker and lazy callbacks. Tasks RCU updates Torture-test updates" * tag 'rcu.2023.06.22a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu: (32 commits) torture: Remove duplicated argument -enable-kvm for ppc64 doc/rcutorture: Add description of rcutorture.stall_cpu_block rcu/rcuscale: Stop kfree_scale_thread thread(s) after unloading rcuscale rcu/rcuscale: Move rcu_scale_*() after kfree_scale_cleanup() rcutorture: Correct name of use_softirq module parameter locktorture: Add long_hold to adjust lock-hold delays rcu/nocb: Make shrinker iterate only over NOCB CPUs rcu-tasks: Stop rcu_tasks_invoke_cbs() from using never-onlined CPUs rcu: Make rcu_cpu_starting() rely on interrupts being disabled rcu: Mark rcu_cpu_kthread() accesses to ->rcu_cpu_has_work rcu: Mark additional concurrent load from ->cpu_no_qs.b.exp rcu: Employ jiffies-based backstop to callback time limit rcu: Check callback-invocation time limit for rcuc kthreads rcu: Remove RCU_NONIDLE() rcu: Add more RCU files to kernel-api.rst rcu-tasks: Clarify the cblist_init_generic() function's pr_info() output rcu-tasks: Avoid pr_info() with spin lock in cblist_init_generic() rcu/nocb: Recheck lazy callbacks under the ->nocb_lock from shrinker rcu/nocb: Fix shrinker race against callback enqueuer rcu/nocb: Protect lazy shrinker against concurrent (de-)offloading ...
2023-06-27net: lan743x: Simplify comparisonMoritz Fischer1-1/+1
Simplify comparison, no functional changes. Cc: Bryan Whitehead <[email protected]> Cc: [email protected] Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Moritz Fischer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski37-195/+417
Merge in late fixes to prepare for the 6.5 net-next PR. Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27netlink: Add __sock_i_ino() for __netlink_diag_dump().Kuniyuki Iwashima3-4/+16
syzbot reported a warning in __local_bh_enable_ip(). [0] Commit 8d61f926d420 ("netlink: fix potential deadlock in netlink_set_err()") converted read_lock(&nl_table_lock) to read_lock_irqsave() in __netlink_diag_dump() to prevent a deadlock. However, __netlink_diag_dump() calls sock_i_ino() that uses read_lock_bh() and read_unlock_bh(). If CONFIG_TRACE_IRQFLAGS=y, read_unlock_bh() finally enables IRQ even though it should stay disabled until the following read_unlock_irqrestore(). Using read_lock() in sock_i_ino() would trigger a lockdep splat in another place that was fixed in commit f064af1e500a ("net: fix a lockdep splat"), so let's add __sock_i_ino() that would be safe to use under BH disabled. [0]: WARNING: CPU: 0 PID: 5012 at kernel/softirq.c:376 __local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376 Modules linked in: CPU: 0 PID: 5012 Comm: syz-executor487 Not tainted 6.4.0-rc7-syzkaller-00202-g6f68fc395f49 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/27/2023 RIP: 0010:__local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376 Code: 45 bf 01 00 00 00 e8 91 5b 0a 00 e8 3c 15 3d 00 fb 65 8b 05 ec e9 b5 7e 85 c0 74 58 5b 5d c3 65 8b 05 b2 b6 b4 7e 85 c0 75 a2 <0f> 0b eb 9e e8 89 15 3d 00 eb 9f 48 89 ef e8 6f 49 18 00 eb a8 0f RSP: 0018:ffffc90003a1f3d0 EFLAGS: 00010046 RAX: 0000000000000000 RBX: 0000000000000201 RCX: 1ffffffff1cf5996 RDX: 0000000000000000 RSI: 0000000000000201 RDI: ffffffff8805c6f3 RBP: ffffffff8805c6f3 R08: 0000000000000001 R09: ffff8880152b03a3 R10: ffffed1002a56074 R11: 0000000000000005 R12: 00000000000073e4 R13: dffffc0000000000 R14: 0000000000000002 R15: 0000000000000000 FS: 0000555556726300(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000045ad50 CR3: 000000007c646000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> sock_i_ino+0x83/0xa0 net/core/sock.c:2559 __netlink_diag_dump+0x45c/0x790 net/netlink/diag.c:171 netlink_diag_dump+0xd6/0x230 net/netlink/diag.c:207 netlink_dump+0x570/0xc50 net/netlink/af_netlink.c:2269 __netlink_dump_start+0x64b/0x910 net/netlink/af_netlink.c:2374 netlink_dump_start include/linux/netlink.h:329 [inline] netlink_diag_handler_dump+0x1ae/0x250 net/netlink/diag.c:238 __sock_diag_cmd net/core/sock_diag.c:238 [inline] sock_diag_rcv_msg+0x31e/0x440 net/core/sock_diag.c:269 netlink_rcv_skb+0x165/0x440 net/netlink/af_netlink.c:2547 sock_diag_rcv+0x2a/0x40 net/core/sock_diag.c:280 netlink_unicast_kernel net/netlink/af_netlink.c:1339 [inline] netlink_unicast+0x547/0x7f0 net/netlink/af_netlink.c:1365 netlink_sendmsg+0x925/0xe30 net/netlink/af_netlink.c:1914 sock_sendmsg_nosec net/socket.c:724 [inline] sock_sendmsg+0xde/0x190 net/socket.c:747 ____sys_sendmsg+0x71c/0x900 net/socket.c:2503 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2557 __sys_sendmsg+0xf7/0x1c0 net/socket.c:2586 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7f5303aaabb9 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffc7506e548 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f5303aaabb9 RDX: 0000000000000000 RSI: 0000000020000180 RDI: 0000000000000003 RBP: 00007f5303a6ed60 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f5303a6edf0 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> Fixes: 8d61f926d420 ("netlink: fix potential deadlock in netlink_set_err()") Reported-by: [email protected] Link: https://syzkaller.appspot.com/bug?extid=5da61cf6a9bc1902d422 Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27net: dsa: avoid suspicious RCU usage for synced VLAN-aware MAC addressesVladimir Oltean5-31/+74
When using the felix driver (the only one which supports UC filtering and MC filtering) as a DSA master for a random other DSA switch, one can see the following stack trace when the downstream switch ports join a VLAN-aware bridge: ============================= WARNING: suspicious RCU usage ----------------------------- net/8021q/vlan_core.c:238 suspicious rcu_dereference_protected() usage! stack backtrace: Workqueue: dsa_ordered dsa_slave_switchdev_event_work Call trace: lockdep_rcu_suspicious+0x170/0x210 vlan_for_each+0x8c/0x188 dsa_slave_sync_uc+0x128/0x178 __hw_addr_sync_dev+0x138/0x158 dsa_slave_set_rx_mode+0x58/0x70 __dev_set_rx_mode+0x88/0xa8 dev_uc_add+0x74/0xa0 dsa_port_bridge_host_fdb_add+0xec/0x180 dsa_slave_switchdev_event_work+0x7c/0x1c8 process_one_work+0x290/0x568 What it's saying is that vlan_for_each() expects rtnl_lock() context and it's not getting it, when it's called from the DSA master's ndo_set_rx_mode(). The caller of that - dsa_slave_set_rx_mode() - is the slave DSA interface's dsa_port_bridge_host_fdb_add() which comes from the deferred dsa_slave_switchdev_event_work(). We went to great lengths to avoid the rtnl_lock() context in that call path in commit 0faf890fc519 ("net: dsa: drop rtnl_lock from dsa_slave_switchdev_event_work"), and calling rtnl_lock() is simply not an option due to the possibility of deadlocking when calling dsa_flush_workqueue() from the call paths that do hold rtnl_lock() - basically all of them. So, when the DSA master calls vlan_for_each() from its ndo_set_rx_mode(), the state of the 8021q driver on this device is really not protected from concurrent access by anything. Looking at net/8021q/, I don't think that vlan_info->vid_list was particularly designed with RCU traversal in mind, so introducing an RCU read-side form of vlan_for_each() - vlan_for_each_rcu() - won't be so easy, and it also wouldn't be exactly what we need anyway. In general I believe that the solution isn't in net/8021q/ anyway; vlan_for_each() is not cut out for this task. DSA doesn't need rtnl_lock() to be held per se - since it's not a netdev state change that we're blocking, but rather, just concurrent additions/removals to a VLAN list. We don't even need sleepable context - the callback of vlan_for_each() just schedules deferred work. The proposed escape is to remove the dependency on vlan_for_each() and to open-code a non-sleepable, rtnl-free alternative to that, based on copies of the VLAN list modified from .ndo_vlan_rx_add_vid() and .ndo_vlan_rx_kill_vid(). Fixes: 64fdc5f341db ("net: dsa: sync unicast and multicast addresses for VLAN filters too") Signed-off-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27Revert "af_unix: Call scm_recv() only after scm_set_cred()."Kuniyuki Iwashima1-1/+1
This reverts commit 3f5f118bb657f94641ea383c7c1b8c09a5d46ea2. Konrad reported that desktop environment below cannot be reached after commit 3f5f118bb657 ("af_unix: Call scm_recv() only after scm_set_cred().") - postmarketOS (Alpine Linux w/ musl 1.2.4) - busybox 1.36.1 - GNOME 44.1 - networkmanager 1.42.6 - openrc 0.47 Regarding to the warning of SO_PASSPIDFD, I'll post another patch to suppress it by skipping SCM_PIDFD if scm->pid == NULL in scm_pidfd_recv(). Reported-by: Konrad Dybcio <[email protected]> Link: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Kuniyuki Iwashima <[email protected]> Tested-by: Ido Schimmel <[email protected]> Tested-by: Gal Pressman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27phylink: ReST-ify the phylink_pcs_neg_mode() kdocJakub Kicinski1-4/+6
Stephen reports warnings when rendering phylink kdocs as HTML: include/linux/phylink.h:110: ERROR: Unexpected indentation. include/linux/phylink.h:111: WARNING: Block quote ends without a blank line; unexpected unindent. include/linux/phylink.h:614: WARNING: Inline literal start-string without end-string. include/linux/phylink.h:644: WARNING: Inline literal start-string without end-string. Make phylink_pcs_neg_mode() use a proper list format to fix the first two warnings. The last two warnings, AFAICT, come from the use of shorthand like phylink_mode_*(). Perhaps those should be special-cased at the Sphinx level. Reported-by: Stephen Rothwell <[email protected]> Link: https://lore.kernel.org/all/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27libceph: Partially revert changes to support MSG_SPLICE_PAGESDavid Howells2-39/+107
Fix the mishandling of MSG_DONTWAIT and also reinstates the per-page checking of the source pages (which might have come from a DIO write by userspace) by partially reverting the changes to support MSG_SPLICE_PAGES and doing things a little differently. In messenger_v1: (1) The ceph_tcp_sendpage() is resurrected and the callers reverted to use that. (2) The callers now pass MSG_MORE unconditionally. Previously, they were passing in MSG_MORE|MSG_SENDPAGE_NOTLAST and then degrading that to just MSG_MORE on the last call to ->sendpage(). (3) Make ceph_tcp_sendpage() a wrapper around sendmsg() rather than sendpage(), setting MSG_SPLICE_PAGES if sendpage_ok() returns true on the page. In messenger_v2: (4) Bring back do_try_sendpage() and make the callers use that. (5) Make do_try_sendpage() use sendmsg() for both cases and set MSG_SPLICE_PAGES if sendpage_ok() is set. Fixes: 40a8c17aa770 ("ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage") Fixes: fa094ccae1e7 ("ceph: Use sendmsg(MSG_SPLICE_PAGES) rather than sendpage()") Reported-by: Ilya Dryomov <[email protected]> Link: https://lore.kernel.org/r/CAOi1vP9vjLfk3W+AJFeexC93jqPaPUn2dD_4NrzxwoZTbYfOnw@mail.gmail.com/ Link: https://lore.kernel.org/r/CAOi1vP_Bn918j24S94MuGyn+Gxk212btw7yWeDrRcW1U8pc_BA@mail.gmail.com/ Signed-off-by: David Howells <[email protected]> cc: Xiubo Li <[email protected]> cc: Jeff Layton <[email protected]> cc: Jens Axboe <[email protected]> cc: Matthew Wilcox <[email protected]> Link: https://lore.kernel.org/r/[email protected]/ # v1 Link: https://lore.kernel.org/r/[email protected]/ # v2 Reviewed-by: Ilya Dryomov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27net: phy: mscc: fix packet loss due to RGMII delaysVladimir Oltean1-2/+2
Two deadly typos break RX and TX traffic on the VSC8502 PHY using RGMII if phy-mode = "rgmii-id" or "rgmii-txid", and no "tx-internal-delay-ps" override exists. The negative error code from phy_get_internal_delay() does not get overridden with the delay deduced from the phy-mode, and later gets committed to hardware. Also, the rx_delay gets overridden by what should have been the tx_delay. Fixes: dbb050d2bfc8 ("phy: mscc: Add support for RGMII delay configuration") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Harini Katakam <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27Merge branch 'use-vmalloc_array-and-vcalloc'Jakub Kicinski6-9/+9
Julia Lawall says: ==================== use vmalloc_array and vcalloc The functions vmalloc_array and vcalloc were introduced in commit a8749a35c399 ("mm: vmalloc: introduce array allocation functions") but are not used much yet. This series introduces uses of these functions, to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch. @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) v2: This series uses vmalloc_array and vcalloc instead of array_size. It also leaves a multiplication of a constant by a sizeof as is. Two patches are thus dropped from the series. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27net: mana: use vmalloc_array and vcallocJulia Lawall1-1/+1
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27net: enetc: use vmalloc_array and vcallocJulia Lawall1-2/+2
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27ionic: use vmalloc_array and vcallocJulia Lawall1-2/+2
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27pds_core: use vmalloc_array and vcallocJulia Lawall1-2/+2
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27gve: use vmalloc_array and vcallocJulia Lawall1-1/+1
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27octeon_ep: use vmalloc_array and vcallocJulia Lawall1-1/+1
Use vmalloc_array and vcalloc to protect against multiplication overflows. The changes were done using the following Coccinelle semantic patch: // <smpl> @initialize:ocaml@ @@ let rename alloc = match alloc with "vmalloc" -> "vmalloc_array" | "vzalloc" -> "vcalloc" | _ -> failwith "unknown" @@ size_t e1,e2; constant C1, C2; expression E1, E2, COUNT, x1, x2, x3; typedef u8; typedef __u8; type t = {u8,__u8,char,unsigned char}; identifier alloc = {vmalloc,vzalloc}; fresh identifier realloc = script:ocaml(alloc) { rename alloc }; @@ ( alloc(x1*x2*x3) | alloc(C1 * C2) | alloc((sizeof(t)) * (COUNT), ...) | - alloc((e1) * (e2)) + realloc(e1, e2) | - alloc((e1) * (COUNT)) + realloc(COUNT, e1) | - alloc((E1) * (E2)) + realloc(E1, E2) ) // </smpl> Signed-off-by: Julia Lawall <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-06-27net: usb: qmi_wwan: add u-blox 0x1312 compositionDavide Tronchin1-0/+1
Add RmNet support for LARA-R6 01B. The new LARA-R6 product variant identified by the "01B" string can be configured (by AT interface) in three different USB modes: * Default mode (Vendor ID: 0x1546 Product ID: 0x1311) with 4 serial interfaces * RmNet mode (Vendor ID: 0x1546 Product ID: 0x1312) with 4 serial interfaces and 1 RmNet virtual network interface * CDC-ECM mode (Vendor ID: 0x1546 Product ID: 0x1313) with 4 serial interface and 1 CDC-ECM virtual network interface The first 4 interfaces of all the 3 configurations (default, RmNet, ECM) are the same. In RmNet mode LARA-R6 01B exposes the following interfaces: If 0: Diagnostic If 1: AT parser If 2: AT parser If 3: AT parset/alternative functions If 4: RMNET interface Signed-off-by: Davide Tronchin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-06-27perf trace: fix MSG_SPLICE_PAGES build errorMatthieu Baerts1-0/+3
Our MPTCP CI and Stephen got this error: In file included from builtin-trace.c:907: trace/beauty/msg_flags.c: In function 'syscall_arg__scnprintf_msg_flags': trace/beauty/msg_flags.c:28:21: error: 'MSG_SPLICE_PAGES' undeclared (first use in this function) 28 | if (flags & MSG_##n) { | ^~~~ trace/beauty/msg_flags.c:50:9: note: in expansion of macro 'P_MSG_FLAG' 50 | P_MSG_FLAG(SPLICE_PAGES); | ^~~~~~~~~~ trace/beauty/msg_flags.c:28:21: note: each undeclared identifier is reported only once for each function it appears in 28 | if (flags & MSG_##n) { | ^~~~ trace/beauty/msg_flags.c:50:9: note: in expansion of macro 'P_MSG_FLAG' 50 | P_MSG_FLAG(SPLICE_PAGES); | ^~~~~~~~~~ The fix is similar to what was done with MSG_FASTOPEN: the new macro is defined if it is not defined in the system headers. Fixes: b848b26c6672 ("net: Kill MSG_SENDPAGE_NOTLAST") Reported-by: Stephen Rothwell <[email protected]> Closes: https://lore.kernel.org/r/[email protected]/ Signed-off-by: Matthieu Baerts <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-06-27Merge tag 'nf-23-06-27' of ↵Paolo Abeni5-8/+60
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Reset shift on Boyer-Moore string match for each block, from Jeremy Sowden. 2) Fix acccess to non-linear area in DCCP conntrack helper, from Florian Westphal. 3) Fix kernel-doc warnings, by Randy Dunlap. 4) Bail out if expires= does not show in SIP helper message, or make ct_sip_parse_numerical_param() tristate and report error if expires= cannot be parsed. 5) Unbind non-anonymous set in case rule construction fails. 6) Fix underflow in chain reference counter in case set element already exists or it cannot be created. netfilter pull request 23-06-27 ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-06-27ipvlan: Fix return value of ipvlan_queue_xmit()Cambda Zhu1-3/+6
ipvlan_queue_xmit() should return NET_XMIT_XXX, but ipvlan_xmit_mode_l2/l3() returns rx_handler_result_t or NET_RX_XXX in some cases. ipvlan_rcv_frame() will only return RX_HANDLER_CONSUMED in ipvlan_xmit_mode_l2/l3() because 'local' is true. It's equal to NET_XMIT_SUCCESS. But dev_forward_skb() can return NET_RX_SUCCESS or NET_RX_DROP, and returning NET_RX_DROP(NET_XMIT_DROP) will increase both ipvlan and ipvlan->phy_dev drops counter. The skb to forward can be treated as xmitted successfully. This patch makes ipvlan_queue_xmit() return NET_XMIT_SUCCESS for forward skb. Fixes: 2ad7bf363841 ("ipvlan: Initial check-in of the IPVLAN driver.") Signed-off-by: Cambda Zhu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-06-26Merge tag 'tag-chrome-platform-for-v6.5' of ↵Linus Torvalds5-17/+21
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform updates from Tzung-Bi Shih: "Improvements: - Support Pin Assignment D in getting mux state - Emit an uevent when EC panics so that userland programs get chance to capture EC coredumps (LPC interface only) - Send EC_CMD_HOST_SLEEP_EVENT to EC at the very beginning/end of system suspend/resume so that EC can watch the duration more accurately (LPC interface only) Misc: - Switch back from I2C .probe_new() to .probe() - Use %*ph for printing hexdump of small buffers" * tag 'tag-chrome-platform-for-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: cros_ec_spi: Use %*ph for printing hexdump of a small buffer platform/chrome: Switch i2c drivers back to use .probe() platform/chrome: cros_ec_lpc: Move host command to prepare/complete platform/chrome: cros_ec: Report EC panic as uevent platform/chrome: cros_typec_switch: Add Pin D support
2023-06-26Merge tag 'thermal-6.5-rc1' of ↵Linus Torvalds32-295/+690
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control updates from Rafael Wysocki: "These extend the int340x thermal driver, add thermal DT bindings for some Qcom platforms, add DT bindings and support for Armada AP807 and MSM8909, allow selecting the bang-bang thermal governor as the default one, address issues in several thermal drivers for ARM platforms and clean up code. Specifics: - Add new IOCTLs to the int340x thermal driver to allow user space to retrieve the Passive v2 thermal table (Srinivas Pandruvada) - Add DT bindings for SM6375, MSM8226 and QCM2290 Qcom platforms (Konrad Dybcio) - Add DT bindings and support for QCom MSM8226 (Matti Lehtimäki) - Add DT bindings for QCom ipq9574 (Praveenkumar I) - Convert bcm2835 DT bindings to the yaml schema (Stefan Wahren) - Allow selecting the bang-bang governor as default (Thierry Reding) - Refactor and prepare the code to set the scene for RCar Gen4 (Wolfram Sang) - Clean up and fix the QCom tsens drivers. Add DT bindings and calibration for the MSM8909 platform (Stephan Gerhold) - Revert a patch introducing a wrong usage of devm_of_iomap() on the Mediatek platform (Ricardo Cañuelo) - Fix the clock vs reset ordering in order to conform to the documentation on the sun8i (Christophe JAILLET) - Prevent setting up undocumented registers, enable the only described sensors and add the version 2.1 on the Qoriq sensor (Peng Fan) - Add DT bindings and support for the Armada AP807 (Alex Leibovich) - Update the mlx5 driver with the recent thermal changes (Daniel Lezcano) - Convert to platform remove callback returning void on STM32 (Uwe Kleine-König) - Add an error information printing for devm_thermal_add_hwmon_sysfs() and remove the error from the Sun8i, Amlogic, i.MX, TI, K3, Tegra, Qoriq, Mediateka and QCom (Yangtao Li) - Register as hwmon sensor for the Generic ADC (Chen-Yu Tsai) - Use the dev_err_probe() function in the QCom tsens alarm driver (Luca Weiss)" * tag 'thermal-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (39 commits) thermal/drivers/qcom/temp-alarm: Use dev_err_probe thermal/drivers/generic-adc: Register thermal zones as hwmon sensors thermal/drivers/mediatek/lvts_thermal: Remove redundant msg in lvts_ctrl_start() thermal/drivers/qcom: Remove redundant msg at probe time thermal/drivers/ti-soc: Remove redundant msg in ti_thermal_expose_sensor() thermal/drivers/qoriq: Remove redundant msg in qoriq_tmu_register_tmu_zone() thermal/drivers/tegra: Remove redundant msg in tegra_tsensor_register_channel() drivers/thermal/k3: Remove redundant msg in k3_bandgap_probe() thermal/drivers/imx: Remove redundant msg in imx8mm_tmu_probe() and imx_sc_thermal_probe() thermal/drivers/amlogic: Remove redundant msg in amlogic_thermal_probe() thermal/drivers/sun8i: Remove redundant msg in sun8i_ths_register() thermal/hwmon: Add error information printing for devm_thermal_add_hwmon_sysfs() thermal/drivers/stm32: Convert to platform remove callback returning void net/mlx5: Update the driver with the recent thermal changes thermal/drivers/armada: Add support for AP807 thermal data dt-bindings: armada-thermal: Add armada-ap807-thermal compatible thermal/drivers/qoriq: Support version 2.1 thermal/drivers/qoriq: Only enable supported sensors thermal/drivers/qoriq: No need to program site adjustment register thermal/drivers/mediatek/lvts_thermal: Register thermal zones as hwmon sensors ...
2023-06-26Merge tag 'pm-6.5-rc1' of ↵Linus Torvalds27-494/+1324
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These add Intel TPMI (Topology Aware Register and PM Capsule Interface) support to the power capping subsystem, extend the intel_idle driver to work in VM guests where MWAIT is not available, extend the system-wide power management diagnostics, fix bugs and clean up code. Specifics: - Introduce power capping core support for Intel TPMI (Topology Aware Register and PM Capsule Interface) and a TPMI interface driver for Intel RAPL (Zhang Rui, Dan Carpenter) - Fix CONFIG_IOSF_MBI dependency in the Intel RAPL power capping driver (Zhang Rui) - Fix invalid initialization for pl4_supported field in the Intel RAPL power capping driver (Sumeet Pawnikar) - Clean up the intel_idle driver, make it work with VM guests that cannot use the MWAIT instruction and address the case in which the host may enter a deep idle state when the guest is idle (Arjan van de Ven) - Prevent cpufreq drivers that provide the ->adjust_perf() callback without a ->fast_switch() one which is used as a fallback from the former in some cases (Wyes Karny) - Fix some issues related to the AMD P-state cpufreq driver (Mario Limonciello, Wyes Karny) - Fix the energy_performance_preference attribute handling in the intel_pstate driver in passive mode (Tero Kristo) - Fix the handling of pm_suspend_target_state when CONFIG_PM is unset (Kai-Heng Feng) - Correct spelling mistake in a comment in the hibernation code (Wang Honghui) - Add arch_resume_nosmt() prototype to avoid a "missing prototypes" build warning (Arnd Bergmann) - Restrict pm_pr_dbg() to system-wide power transitions and use it in a few additional places (Mario Limonciello) - Drop verification of in-params from genpd_add_device() and ensure that all of its callers will do it (Ulf Hansson) - Prevent possible integer overflows from occurring in genpd_parse_state() (Nikita Zhandarovich) - Reorder fieldls in 'struct devfreq_dev_status' to reduce its size somewhat (Christophe JAILLET) - Ensure that the Exynos PPMU driver is already loaded before the Exynos Bus driver starts probing so as to avoid a possible freeze loading of the kernel modules (Marek Szyprowski) - Fix variable deferencing before NULL check in the mtk-cci devfreq driver (Sukrut Bellary)" * tag 'pm-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (42 commits) intel_idle: Add a "Long HLT" C1 state for the VM guest mode cpufreq: intel_pstate: Fix energy_performance_preference for passive cpufreq: amd-pstate: Add a kernel config option to set default mode cpufreq: amd-pstate: Set a fallback policy based on preferred_profile ACPI: CPPC: Add definition for undefined FADT preferred PM profile value cpufreq: amd-pstate: Set default governor to schedutil PM: domains: Move the verification of in-params from genpd_add_device() cpufreq: amd-pstate: Make amd-pstate EPP driver name hyphenated cpufreq: amd-pstate: Write CPPC enable bit per-socket intel_idle: Add support for using intel_idle in a VM guest using just hlt cpufreq: Fail driver register if it has adjust_perf without fast_switch intel_idle: clean up the (new) state_update_enter_method function intel_idle: refactor state->enter manipulation into its own function platform/x86/amd: pmc: Use pm_pr_dbg() for suspend related messages pinctrl: amd: Use pm_pr_dbg to show debugging messages ACPI: x86: Add pm_debug_messages for LPS0 _DSM state tracking include/linux/suspend.h: Only show pm_pr_dbg messages at suspend/resume powercap: RAPL: Fix a NULL vs IS_ERR() bug powercap: RAPL: Fix CONFIG_IOSF_MBI dependency powercap: RAPL: fix invalid initialization for pl4_supported field ...
2023-06-26Merge tag 'acpi-6.5-rc1' of ↵Linus Torvalds18-376/+459
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI updates from Rafael Wysocki: "These rework the handling of notifications in ACPI button drivers (to enable future simplifications and cleanups), clean up the ACPI thermal driver, update the ACPI backlight driver, add quirks working around AML bugs on some systems, fix some assorted issues and clean up code. Specifics: - Reduce ACPI device enumeration overhead related to devices with dependencies (Rafael Wysocki) - Fix the handling of Microsoft LPS0 _DSM for suspend-to-idle (Mario Limonciello) - Fix section mismatch warning in the ACPI suspend-to-idle code (Arnd Bergmann) - Drop several ACPI resource management quirks related to IRQ ovverides on AMD "Zen" systems (Mario Limonciello) - Modify the ACPI EC driver to make it only clear the EC GPE status when handling the GPE (Jeremy Compostella) - Add quirks to work around ACPI tables defects on Lenovo Yoga Book yb1-x90f/l and Nextbook Ares 8A (Hans de Goede) - Add ACPi backlight quirks for Dell Studio 1569, Lenovo ThinkPad X131e (3371 AMD version) and Apple iMac11,3 and stop trying to use vendor backlight control on relatively recent systems (Hans de Goede) - Add pwm_lookup_table entry for second PWM on CHT/BSW devices in the ACPI LPSS (Intel SoC) driver (Hans de Goede) - Add nfit_intel_shutdown_status() declaration to a local header to avoid a "missing prototypes" build warning (Arnd Bergmann) - Clean up the ACPI thermal driver and drop some dead or otherwise unneded code from it (Rafael Wysocki) - Rework the handling of notifications in the ACPI button drivers so as to allow the common notification handling code for devices to be simplified (Rafael Wysocki) - Make ghes_get_devices() return NULL to indicate that there are no GHES devices so as to allow vendor-specific EDAC drivers to probe then (Li Yang) - Mark bert_disable() as __initdata and drop an unused function from the APEI GHES code (Miaohe Lin) - Make the ACPI PAD (Processor Aggregator Device) driver realize that Zhaoxin CPUs support nonstop TSC (Tony W Wang-oc) - Drop the certainly unnecessary and likely incorrect inclusion of linux/arm-smccc.h from acpi_ffh.c (Sudeep Holla)" * tag 'acpi-6.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (30 commits) ACPI: video: Add backlight=native DMI quirk for Dell Studio 1569 ACPI: thermal: Drop struct acpi_thermal_flags ACPI: thermal: Drop struct acpi_thermal_state ACPI: bus: Simplify installation and removal of notify callback ACPI: tiny-power-button: Eliminate the driver notify callback ACPI: button: Use different notify handlers for lid and buttons ACPI: button: Eliminate the driver notify callback ACPI: thermal: Eliminate struct acpi_thermal_state_flags ACPI: thermal: Move acpi_thermal_driver definition ACPI: thermal: Move symbol definitions to one place ACPI: thermal: Drop redundant ACPI_TRIPS_REFRESH_DEVICES symbol ACPI: thermal: Use BIT() macro for defining flags APEI: GHES: correctly return NULL for ghes_get_devices() ACPI: FFH: Drop the inclusion of linux/arm-smccc.h ACPI: PAD: mark Zhaoxin CPUs NONSTOP TSC correctly ACPI: APEI: mark bert_disable as __initdata ACPI: EC: Clear GPE on interrupt handling only ACPI: video: Stop trying to use vendor backlight control on laptops from after ~2012 ACPI: x86: s2idle: Adjust Microsoft LPS0 _DSM handling sequence ACPI: resource: Remove "Zen" specific match and quirks ...
2023-06-26Merge tag 'arm64-upstream' of ↵Linus Torvalds120-786/+3429
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 updates from Catalin Marinas: "Notable features are user-space support for the memcpy/memset instructions and the permission indirection extension. - Support for the Armv8.9 Permission Indirection Extensions. While this feature doesn't add new functionality, it enables future support for Guarded Control Stacks (GCS) and Permission Overlays - User-space support for the Armv8.8 memcpy/memset instructions - arm64 perf: support the HiSilicon SoC uncore PMU, Arm CMN sysfs identifier, support for the NXP i.MX9 SoC DDRC PMU, fixes and cleanups - Removal of superfluous ISBs on context switch (following retrospective architecture tightening) - Decode the ISS2 register during faults for additional information to help with debugging - KPTI clean-up/simplification of the trampoline exit code - Addressing several -Wmissing-prototype warnings - Kselftest improvements for signal handling and ptrace - Fix TPIDR2_EL0 restoring on sigreturn - Clean-up, robustness improvements of the module allocation code - More sysreg conversions to the automatic register/bitfields generation - CPU capabilities handling cleanup - Arm documentation updates: ACPI, ptdump" * tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (124 commits) kselftest/arm64: Add a test case for TPIDR2 restore arm64/signal: Restore TPIDR2 register rather than memory state arm64: alternatives: make clean_dcache_range_nopatch() noinstr-safe Documentation/arm64: Add ptdump documentation arm64: hibernate: remove WARN_ON in save_processor_state kselftest/arm64: Log signal code and address for unexpected signals docs: perf: Fix warning from 'make htmldocs' in hisi-pmu.rst arm64/fpsimd: Exit streaming mode when flushing tasks docs: perf: Add new description for HiSilicon UC PMU drivers/perf: hisi: Add support for HiSilicon UC PMU driver drivers/perf: hisi: Add support for HiSilicon H60PA and PAv3 PMU driver perf: arm_cspmu: Add missing MODULE_DEVICE_TABLE perf/arm-cmn: Add sysfs identifier perf/arm-cmn: Revamp model detection perf/arm_dmc620: Add cpumask arm64: mm: fix VA-range sanity check arm64/mm: remove now-superfluous ISBs from TTBR writes Documentation/arm64: Update ACPI tables from BBR Documentation/arm64: Update references in arm-acpi Documentation/arm64: Update ARM and arch reference ...
2023-06-26Merge tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds55-80/+185
Pull ARM updates from Russell King: - lots of build cleanups from Arnd spread throughout the arch/arm tree - replace strlcpy() with the preferred strscpy() - use sign_extend32() in the module linker - drop handle_irq() machine descriptor method * tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 9315/1: fiq: include asm/mach/irq.h for prototypes ARM: 9314/1: tcm: move tcm_init() prototype to asm/tcm.h ARM: 9313/1: vdso: add missing prototypes ARM: 9312/1: vfp: include asm/neon.h in vfpmodule.c ARM: 9311/1: decompressor: move function prototypes to misc.h ARM: 9310/1: xip-kernel: add __inflate_kernel_data prototype ARM: 9309/1: add missing syscall prototypes ARM: 9308/1: move setup functions to header ARM: 9307/1: nommu: include asm/idmap.h ARM: 9306/1: cacheflush: avoid __flush_anon_page() missing-prototype warning ARM: 9305/1: add clear/copy_user_highpage declarations ARM: 9304/1: add prototype for function called only from asm ARM: 9303/1: kprobes: avoid missing-declaration warnings ARM: 9302/1: traps: hide unused functions on NOMMU ARM: 9301/1: dma-mapping: hide unused dma_contiguous_early_fixup function ARM: 9300/1: Replace all non-returning strlcpy with strscpy ARM: 9299/1: module: use sign_extend32() to extend the signedness ARM: 9298/1: Drop custom mdesc->handle_irq()
2023-06-26Merge tag 'm68k-for-v6.5-tag1' of ↵Linus Torvalds16-26/+46
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k updates from Geert Uytterhoeven: - miscellaneous NuBus fixes and improvements - defconfig updates * tag 'm68k-for-v6.5-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: defconfig: Update defconfigs for v6.4-rc1 nubus: Don't list slot resources by default nubus: Remove proc entries before adding them nubus: Partially revert proc_create_single_data() conversion
2023-06-26Merge tag 'x86_cleanups_for_6.5' of ↵Linus Torvalds28-54/+78
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Dave Hansen: "As usual, these are all over the map. The biggest cluster is work from Arnd to eliminate -Wmissing-prototype warnings: - Address -Wmissing-prototype warnings - Remove repeated 'the' in comments - Remove unused current_untag_mask() - Document urgent tip branch timing - Clean up MSR kernel-doc notation - Clean up paravirt_ops doc - Update Srivatsa S. Bhat's maintained areas - Remove unused extern declaration acpi_copy_wakeup_routine()" * tag 'x86_cleanups_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) x86/acpi: Remove unused extern declaration acpi_copy_wakeup_routine() Documentation: virt: Clean up paravirt_ops doc x86/mm: Remove unused current_untag_mask() x86/mm: Remove repeated word in comments x86/lib/msr: Clean up kernel-doc notation x86/platform: Avoid missing-prototype warnings for OLPC x86/mm: Add early_memremap_pgprot_adjust() prototype x86/usercopy: Include arch_wb_cache_pmem() declaration x86/vdso: Include vdso/processor.h x86/mce: Add copy_mc_fragile_handle_tail() prototype x86/fbdev: Include asm/fb.h as needed x86/hibernate: Declare global functions in suspend.h x86/entry: Add do_SYSENTER_32() prototype x86/quirks: Include linux/pnp.h for arch_pnpbios_disabled() x86/mm: Include asm/numa.h for set_highmem_pages_init() x86: Avoid missing-prototype warnings for doublefault code x86/fpu: Include asm/fpu/regset.h x86: Add dummy prototype for mk_early_pgtbl_32() x86/pci: Mark local functions as 'static' x86/ftrace: Move prepare_ftrace_return prototype to header ...
2023-06-26Merge tag 'x86_tdx_for_6.5' of ↵Linus Torvalds7-21/+69
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 tdx updates from Dave Hansen: - Fix a race window where load_unaligned_zeropad() could cause a fatal shutdown during TDX private<=>shared conversion The race has never been observed in practice but might allow load_unaligned_zeropad() to catch a TDX page in the middle of its conversion process which would lead to a fatal and unrecoverable guest shutdown. - Annotate sites where VM "exit reasons" are reused as hypercall numbers. * tag 'x86_tdx_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Fix enc_status_change_finish_noop() x86/tdx: Fix race between set_memory_encrypted() and load_unaligned_zeropad() x86/mm: Allow guest.enc_status_change_prepare() to fail x86/tdx: Wrap exit reason with hcall_func()
2023-06-26Merge tag 'x86_platform_for_6.5' of ↵Linus Torvalds3-136/+232
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform updates from Dave Hansen: "Allow CPUs in SGX/HPE Ultraviolet to start using Sub-NUMA clustering (SNC) mode. SNC has been around outside the UV world for a while but evidently never worked on UV systems. SNC is rather notorious for breaking bad assumptions of a 1:1 relationship between physical sockets and NUMA nodes. The UV code was rather prolific with these assumptions and took quite a bit of refactoring to remove them" * tag 'x86_platform_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/platform/uv: Update UV[23] platform code for SNC x86/platform/uv: Remove remaining BUG_ON() and BUG() calls x86/platform/uv: UV support for sub-NUMA clustering x86/platform/uv: Helper functions for allocating and freeing conversion tables x86/platform/uv: When searching for minimums, start at INT_MAX not 99999 x86/platform/uv: Fix printed information in calc_mmioh_map x86/platform/uv: Introduce helper function uv_pnode_to_socket. x86/platform/uv: Add platform resolving #defines for misc GAM_MMIOH_REDIRECT*
2023-06-26Merge tag 'x86_irq_for_6.5' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 irq updates from Dave Hansen: "Add Hyper-V interrupts to /proc/stat" * tag 'x86_irq_for_6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Add hardcoded hypervisor interrupts to /proc/stat
2023-06-26Merge tag 'x86_cpu_for_v6.5' of ↵Linus Torvalds9-41/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Borislav Petkov: - Compute the purposeful misalignment of zen_untrain_ret automatically and assert __x86_return_thunk's alignment so that future changes to the symbol macros do not accidentally break them. - Remove CONFIG_X86_FEATURE_NAMES Kconfig option as its existence is pointless * tag 'x86_cpu_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/retbleed: Add __x86_return_thunk alignment checks x86/cpu: Remove X86_FEATURE_NAMES x86/Kconfig: Make X86_FEATURE_NAMES non-configurable in prompt
2023-06-26Merge tag 'x86_cc_for_v6.5' of ↵Linus Torvalds44-307/+1448
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 confidential computing update from Borislav Petkov: - Add support for unaccepted memory as specified in the UEFI spec v2.9. The gist of it all is that Intel TDX and AMD SEV-SNP confidential computing guests define the notion of accepting memory before using it and thus preventing a whole set of attacks against such guests like memory replay and the like. There are a couple of strategies of how memory should be accepted - the current implementation does an on-demand way of accepting. * tag 'x86_cc_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: virt: sevguest: Add CONFIG_CRYPTO dependency x86/efi: Safely enable unaccepted memory in UEFI x86/sev: Add SNP-specific unaccepted memory support x86/sev: Use large PSC requests if applicable x86/sev: Allow for use of the early boot GHCB for PSC requests x86/sev: Put PSC struct on the stack in prep for unaccepted memory support x86/sev: Fix calculation of end address based on number of pages x86/tdx: Add unaccepted memory support x86/tdx: Refactor try_accept_one() x86/tdx: Make _tdx_hypercall() and __tdx_module_call() available in boot stub efi/unaccepted: Avoid load_unaligned_zeropad() stepping into unaccepted memory efi: Add unaccepted memory support x86/boot/compressed: Handle unaccepted memory efi/libstub: Implement support for unaccepted memory efi/x86: Get full memory map in allocate_e820() mm: Add support for unaccepted memory
2023-06-26Merge tag 'x86_cache_for_v6.5' of ↵Linus Torvalds2-15/+163
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 resource control updates from Borislav Petkov: - Implement a rename operation in resctrlfs to facilitate handling of application containers with dynamically changing task lists - When reading the tasks file, show the tasks' pid which are only in the current namespace as opposed to showing the pids from the init namespace too - Other fixes and improvements * tag 'x86_cache_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation/x86: Documentation for MON group move feature x86/resctrl: Implement rename op for mon groups x86/resctrl: Factor rdtgroup lock for multi-file ops x86/resctrl: Only show tasks' pid in current pid namespace
2023-06-26Merge tag 'x86_build_for_v6.5' of ↵Linus Torvalds2-5/+50
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 build update from Borislav Petkov: - Remove relocation information from vmlinux as it is not needed by other tooling and thus a slimmer binary is generated. This is important for distros who have to distribute vmlinux blobs with their kernel packages too and that extraneous unnecessary data bloats them for no good reason * tag 'x86_build_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Avoid relocation information in final vmlinux
2023-06-26Merge tag 'x86_alternatives_for_v6.5' of ↵Linus Torvalds6-168/+361
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 instruction alternatives updates from Borislav Petkov: - Up until now the Fast Short Rep Mov optimizations implied the presence of the ERMS CPUID flag. AMD decoupled them with a BIOS setting so decouple that dependency in the kernel code too - Teach the alternatives machinery to handle relocations - Make debug_alternative accept flags in order to see only that set of patching done one is interested in - Other fixes, cleanups and optimizations to the patching code * tag 'x86_alternatives_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternative: PAUSE is not a NOP x86/alternatives: Add cond_resched() to text_poke_bp_batch() x86/nospec: Shorten RESET_CALL_DEPTH x86/alternatives: Add longer 64-bit NOPs x86/alternatives: Fix section mismatch warnings x86/alternative: Optimize returns patching x86/alternative: Complicate optimize_nops() some more x86/alternative: Rewrite optimize_nops() some x86/lib/memmove: Decouple ERMS from FSRM x86/alternative: Support relocations in alternatives x86/alternative: Make debug-alternative selective
2023-06-26Merge tag 'ras_core_for_v6.5' of ↵Linus Torvalds9-58/+513
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull RAS updates from Borislav Petkov: - Add initial support for RAS hardware found on AMD server GPUs (MI200). Those GPUs and CPUs are connected together through the coherent fabric and the GPU memory controllers report errors through x86's MCA so EDAC needs to support them. The amd64_edac driver supports now HBM (High Bandwidth Memory) and thus such heterogeneous memory controller systems - Other small cleanups and improvements * tag 'ras_core_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: EDAC/amd64: Cache and use GPU node map EDAC/amd64: Add support for AMD heterogeneous Family 19h Model 30h-3Fh EDAC/amd64: Document heterogeneous system enumeration x86/MCE/AMD, EDAC/mce_amd: Decode UMC_V2 ECC errors x86/amd_nb: Re-sort and re-indent PCI defines x86/amd_nb: Add MI200 PCI IDs ras/debugfs: Fix error checking for debugfs_create_dir() x86/MCE: Check a hw error's address to determine proper recovery action
2023-06-26Merge tag 'edac_updates_for_v6.5' of ↵Linus Torvalds8-5/+623
git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - amd64_edac: Add support for Zen4 client hardware - amd64_edac: Remove the version string as it is useless and actively confusing when looking at backported versions of the driver - Add a driver for the Nuvoton NPCM memory controller - A debugfs error checking cleanup * tag 'edac_updates_for_v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/npcm: Add NPCM memory controller driver dt-bindings: memory-controllers: nuvoton: Add NPCM memory controller EDAC/thunderx: Check debugfs file creation retval properly EDAC/amd64: Add support for ECC on family 19h model 60h-7Fh EDAC/amd64: Remove module version string
2023-06-26Merge tag 'x86-core-2023-06-26' of ↵Linus Torvalds5-72/+217
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core updates from Thomas Gleixner: "A set of fixes for kexec(), reboot and shutdown issues: - Ensure that the WBINVD in stop_this_cpu() has been completed before the control CPU proceedes. stop_this_cpu() is used for kexec(), reboot and shutdown to park the APs in a HLT loop. The control CPU sends an IPI to the APs and waits for their CPU online bits to be cleared. Once they all are marked "offline" it proceeds. But stop_this_cpu() clears the CPU online bit before issuing WBINVD, which means there is no guarantee that the AP has reached the HLT loop. This was reported to cause intermittent reboot/shutdown failures due to some dubious interaction with the firmware. This is not only a problem of WBINVD. The code to actually "stop" the CPU which runs between clearing the online bit and reaching the HLT loop can cause large enough delays on its own (think virtualization). That's especially dangerous for kexec() as kexec() expects that all APs are in a safe state and not executing code while the boot CPU jumps to the new kernel. There are more issues vs kexec() which are addressed separately. Cure this by implementing an explicit synchronization point right before the AP reaches HLT. This guarantees that the AP has completed the full stop proceedure. - Fix the condition for WBINVD in stop_this_cpu(). The WBINVD in stop_this_cpu() is required for ensuring that when switching to or from memory encryption no dirty data is left in the cache lines which might cause a write back in the wrong more later. This checks CPUID directly because the feature bit might have been cleared due to a command line option. But that CPUID check accesses leaf 0x8000001f::EAX unconditionally. Intel CPUs return the content of the highest supported leaf when a non-existing leaf is read, while AMD CPUs return all zeros for unsupported leafs. So the result of the test on Intel CPUs is lottery and on AMD its just correct by chance. While harmless it's incorrect and causes the conditional wbinvd() to be issued where not required, which caused the above issue to be unearthed. - Make kexec() robust against AP code execution Ashok observed triple faults when doing kexec() on a system which had been booted with "nosmt". It turned out that the SMT siblings which had been brought up partially are parked in mwait_play_dead() to enable power savings. mwait_play_dead() is monitoring the thread flags of the AP's idle task, which has been chosen as it's unlikely to be written to. But kexec() can overwrite the previous kernel text and data including page tables etc. When it overwrites the cache lines monitored by an AP that AP resumes execution after the MWAIT on eventually overwritten text, stack and page tables, which obviously might end up in a triple fault easily. Make this more robust in several steps: 1) Use an explicit per CPU cache line for monitoring. 2) Write a command to these cache lines to kick APs out of MWAIT before proceeding with kexec(), shutdown or reboot. The APs confirm the wakeup by writing status back and then enter a HLT loop. 3) If the system uses INIT/INIT/STARTUP for AP bringup, park the APs in INIT state. HLT is not a guarantee that an AP won't wake up and resume execution. HLT is woken up by NMI and SMI. SMI puts the CPU back into HLT (+/- firmware bugs), but NMI is delivered to the CPU which executes the NMI handler. Same issue as the MWAIT scenario described above. Sending an INIT/INIT sequence to the APs puts them into wait for STARTUP state, which is safe against NMI. There is still an issue remaining which can't be fixed: #MCE If the AP sits in HLT and receives a broadcast #MCE it will try to handle it with the obvious consequences. INIT/INIT clears CR4.MCE in the AP which will cause a broadcast #MCE to shut down the machine. So there is a choice between fire (HLT) and frying pan (INIT). Frying pan has been chosen as it's at least preventing the NMI issue. On systems which are not using INIT/INIT/STARTUP there is not much which can be done right now, but at least the obvious and easy to trigger MWAIT issue has been addressed" * tag 'x86-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/smp: Put CPUs into INIT on shutdown if possible x86/smp: Split sending INIT IPI out into a helper function x86/smp: Cure kexec() vs. mwait_play_dead() breakage x86/smp: Use dedicated cache-line for mwait_play_dead() x86/smp: Remove pointless wmb()s from native_stop_other_cpus() x86/smp: Dont access non-existing CPUID leaf x86/smp: Make stop_other_cpus() more robust
2023-06-26Merge tag 'timers-core-2023-06-26' of ↵Linus Torvalds29-587/+777
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "Time, timekeeping and related device driver updates: Core: - A set of fixes, cleanups and enhancements to the posix timer code: - Prevent another possible live lock scenario in the exit() path, which affects POSIX_CPU_TIMERS_TASK_WORK enabled architectures. - Fix a loop termination issue which was reported syzcaller/KSAN in the posix timer ID allocation code. That triggered a deeper look into the posix-timer code which unearthed more small issues. - Add missing READ/WRITE_ONCE() annotations - Fix or remove completely outdated comments - Document places which are subtle and completely undocumented. - Add missing hrtimer modes to the trace event decoder - Small cleanups and enhancements all over the place Drivers: - Rework the Hyper-V clocksource and sched clock setup code - Remove a deprecated clocksource driver - Small fixes and enhancements all over the place" * tag 'timers-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits) clocksource/drivers/cadence-ttc: Fix memory leak in ttc_timer_probe dt-bindings: timers: Add Ralink SoCs timer clocksource/drivers/hyper-v: Rework clocksource and sched clock setup dt-bindings: timer: brcm,kona-timer: convert to YAML clocksource/drivers/imx-gpt: Fold <soc/imx/timer.h> into its only user clk: imx: Drop inclusion of unused header <soc/imx/timer.h> hrtimer: Add missing sparse annotations to hrtimer locking clocksource/drivers/imx-gpt: Use only a single name for functions clocksource/drivers/loongson1: Move PWM timer to clocksource framework dt-bindings: timer: Add Loongson-1 clocksource MIPS: Loongson32: Remove deprecated PWM timer clocksource clocksource/drivers/ingenic-timer: Use pm_sleep_ptr() macro tracing/timer: Add missing hrtimer modes to decode_hrtimer_mode(). posix-timers: Add sys_ni_posix_timers() prototype tick/rcu: Fix bogus ratelimit condition alarmtimer: Remove unnecessary (void *) cast alarmtimer: Remove unnecessary initialization of variable 'ret' posix-timers: Refer properly to CONFIG_HIGH_RES_TIMERS posix-timers: Polish coding style in a few places posix-timers: Remove pointless comments ...
2023-06-26Merge tag 'smp-core-2023-06-26' of ↵Linus Torvalds66-1011/+1077
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull SMP updates from Thomas Gleixner: "A large update for SMP management: - Parallel CPU bringup The reason why people are interested in parallel bringup is to shorten the (kexec) reboot time of cloud servers to reduce the downtime of the VM tenants. The current fully serialized bringup does the following per AP: 1) Prepare callbacks (allocate, intialize, create threads) 2) Kick the AP alive (e.g. INIT/SIPI on x86) 3) Wait for the AP to report alive state 4) Let the AP continue through the atomic bringup 5) Let the AP run the threaded bringup to full online state There are two significant delays: #3 The time for an AP to report alive state in start_secondary() on x86 has been measured in the range between 350us and 3.5ms depending on vendor and CPU type, BIOS microcode size etc. #4 The atomic bringup does the microcode update. This has been measured to take up to ~8ms on the primary threads depending on the microcode patch size to apply. On a two socket SKL server with 56 cores (112 threads) the boot CPU spends on current mainline about 800ms busy waiting for the APs to come up and apply microcode. That's more than 80% of the actual onlining procedure. This can be reduced significantly by splitting the bringup mechanism into two parts: 1) Run the prepare callbacks and kick the AP alive for each AP which needs to be brought up. The APs wake up, do their firmware initialization and run the low level kernel startup code including microcode loading in parallel up to the first synchronization point. (#1 and #2 above) 2) Run the rest of the bringup code strictly serialized per CPU (#3 - #5 above) as it's done today. Parallelizing that stage of the CPU bringup might be possible in theory, but it's questionable whether required surgery would be justified for a pretty small gain. If the system is large enough the first AP is already waiting at the first synchronization point when the boot CPU finished the wake-up of the last AP. That reduces the AP bringup time on that SKL from ~800ms to ~80ms, i.e. by a factor ~10x. The actual gain varies wildly depending on the system, CPU, microcode patch size and other factors. There are some opportunities to reduce the overhead further, but that needs some deep surgery in the x86 CPU bringup code. For now this is only enabled on x86, but the core functionality obviously works for all SMP capable architectures. - Enhancements for SMP function call tracing so it is possible to locate the scheduling and the actual execution points. That allows to measure IPI delivery time precisely" * tag 'smp-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (45 commits) trace,smp: Add tracepoints for scheduling remotelly called functions trace,smp: Add tracepoints around remotelly called functions MAINTAINERS: Add CPU HOTPLUG entry x86/smpboot: Fix the parallel bringup decision x86/realmode: Make stack lock work in trampoline_compat() x86/smp: Initialize cpu_primary_thread_mask late cpu/hotplug: Fix off by one in cpuhp_bringup_mask() x86/apic: Fix use of X{,2}APIC_ENABLE in asm with older binutils x86/smpboot/64: Implement arch_cpuhp_init_parallel_bringup() and enable it x86/smpboot: Support parallel startup of secondary CPUs x86/smpboot: Implement a bit spinlock to protect the realmode stack x86/apic: Save the APIC virtual base address cpu/hotplug: Allow "parallel" bringup up to CPUHP_BP_KICK_AP_STATE x86/apic: Provide cpu_primary_thread mask x86/smpboot: Enable split CPU startup cpu/hotplug: Provide a split up CPUHP_BRINGUP mechanism cpu/hotplug: Reset task stack state in _cpu_up() cpu/hotplug: Remove unused state functions riscv: Switch to hotplug core state synchronization parisc: Switch to hotplug core state synchronization ...
2023-06-26Merge tag 'x86-boot-2023-06-26' of ↵Linus Torvalds44-352/+194
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 boot updates from Thomas Gleixner: "Initialize FPU late. Right now FPU is initialized very early during boot. There is no real requirement to do so. The only requirement is to have it done before alternatives are patched. That's done in check_bugs() which does way more than what the function name suggests. So first rename check_bugs() to arch_cpu_finalize_init() which makes it clear what this is about. Move the invocation of arch_cpu_finalize_init() earlier in start_kernel() as it has to be done before fork_init() which needs to know the FPU register buffer size. With those prerequisites the FPU initialization can be moved into arch_cpu_finalize_init(), which removes it from the early and fragile part of the x86 bringup" * tag 'x86-boot-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mem_encrypt: Unbreak the AMD_MEM_ENCRYPT=n build x86/fpu: Move FPU initialization into arch_cpu_finalize_init() x86/fpu: Mark init functions __init x86/fpu: Remove cpuinfo argument from init functions x86/init: Initialize signal frame size late init, x86: Move mem_encrypt_init() into arch_cpu_finalize_init() init: Invoke arch_cpu_finalize_init() earlier init: Remove check_bugs() leftovers um/cpu: Switch to arch_cpu_finalize_init() sparc/cpu: Switch to arch_cpu_finalize_init() sh/cpu: Switch to arch_cpu_finalize_init() mips/cpu: Switch to arch_cpu_finalize_init() m68k/cpu: Switch to arch_cpu_finalize_init() loongarch/cpu: Switch to arch_cpu_finalize_init() ia64/cpu: Switch to arch_cpu_finalize_init() ARM: cpu: Switch to arch_cpu_finalize_init() x86/cpu: Switch to arch_cpu_finalize_init() init: Provide arch_cpu_finalize_init()
2023-06-26Merge tag 'irq-core-2023-06-26' of ↵Linus Torvalds23-297/+384
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq updates from Thomas Gleixner: "Updates for the interrupt subsystem: Core: - Convert the interrupt descriptor storage to a maple tree to overcome the limitations of the radixtree + fixed size bitmap. This allows us to handle very large servers with a huge number of guests without imposing a huge memory overhead on everyone - Implement optional retriggering of interrupts which utilize the fasteoi handler to work around a GICv3 architecture issue Drivers: - A set of fixes and updates for the Loongson/Loongarch related drivers - Workaound for an ASR8601 integration hickup which ends up with CPU numbering which can't be represented in the GIC implementation - The usual set of boring fixes and updates all over the place" * tag 'irq-core-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) Revert "irqchip/mxs: Include linux/irqchip/mxs.h" irqchip/jcore-aic: Fix missing allocation of IRQ descriptors irqchip/stm32-exti: Fix warning on initialized field overwritten irqchip/stm32-exti: Add STM32MP15xx IWDG2 EXTI to GIC map irqchip/gicv3: Add a iort_pmsi_get_dev_id() prototype irqchip/mxs: Include linux/irqchip/mxs.h irqchip/clps711x: Remove unused clps711x_intc_init() function irqchip/mmp: Remove non-DT codepath irqchip/ftintc010: Mark all function static irqdomain: Include internals.h for function prototypes irqchip/loongson-eiointc: Add DT init support dt-bindings: interrupt-controller: Add Loongson EIOINTC irqchip/loongson-eiointc: Fix irq affinity setting during resume irqchip/loongson-liointc: Add IRQCHIP_SKIP_SET_WAKE flag irqchip/loongson-liointc: Fix IRQ trigger polarity irqchip/loongson-pch-pic: Fix potential incorrect hwirq assignment irqchip/loongson-pch-pic: Fix initialization of HT vector register irqchip/gic-v3-its: Enable RESEND_WHEN_IN_PROGRESS for LPIs genirq: Allow fasteoi handler to resend interrupts on concurrent handling genirq: Expand doc for PENDING and REPLAY flags ...
2023-06-26Merge tag 'core-debugobjects-2023-06-26' of ↵Linus Torvalds1-0/+9
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull debugobjects update from Thomas Gleixner: "A single update for debug objects: - Recheck whether debug objects is enabled before reporting a problem to avoid spamming the logs with messages which are caused by a concurrent OOM" * tag 'core-debugobjects-2023-06-26' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip: debugobjects: Recheck debug_objects_enabled before reporting
2023-06-26Merge tag 'nf-next-23-06-26' of ↵Jakub Kicinski23-70/+199
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next Pablo Neira Ayuso says: ==================== Netfilter/IPVS updates for net-next 1) Allow slightly larger IPVS connection table size from Kconfig for 64-bit arch, from Abhijeet Rastogi. 2) Since IPVS connection table might be larger than 2^20 after previous patch, allow to limit it depending on the available memory. Moreover, use kvmalloc. From Julian Anastasov. 3) Do not rebuild VLAN header in nft_payload when matching source and destination MAC address. 4) Remove nested rcu read lock side in ip_set_test(), from Florian Westphal. 5) Allow to update set size, also from Florian. 6) Improve NAT tuple selection when connection is closing, from Florian Westphal. 7) Support for resetting set element stateful expression, from Phil Sutter. 8) Use NLA_POLICY_MAX to narrow down maximum attribute value in nf_tables, from Florian Westphal. * tag 'nf-next-23-06-26' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: netfilter: nf_tables: limit allowed range via nla_policy netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET netfilter: snat: evict closing tcp entries on reply tuple collision netfilter: nf_tables: permit update of set size netfilter: ipset: remove rcu_read_lock_bh pair from ip_set_test netfilter: nft_payload: rebuild vlan header when needed ipvs: dynamically limit the connection hash table ipvs: increase ip_vs_conn_tab_bits range for 64BIT ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.