| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Improve the reporting of buffer overflows under CONFIG_FORTIFY_SOURCE to
help accelerate debugging efforts. The calculations are all just sitting
in registers anyway, so pass them along to the function to be reported.
For example, before:
detected buffer overflow in memcpy
and after:
memcpy: detected buffer overflow: 4096 byte read of buffer size 1
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
With fortify overflows able to be redirected, we can use KUnit to
exercise the overflow conditions. Add tests for every API covered by
CONFIG_FORTIFY_SOURCE, except for memset() and memcpy(), which are
special-cased for now.
Disable warnings in the Makefile since we're explicitly testing
known-bad string handling code patterns.
Note that this makes the LKDTM FORTIFY_STR* tests obsolete, but those
can be removed separately.
Signed-off-by: Kees Cook <[email protected]>
|
|
The standard C string APIs were not designed to have a failure mode;
they were expected to always succeed without memory safety issues.
Normally, CONFIG_FORTIFY_SOURCE will use fortify_panic() to stop
processing, as truncating a read or write may provide an even worse
system state. However, this creates a problem for testing under things
like KUnit, which needs a way to survive failures.
When building with CONFIG_KUNIT, provide a failure path for all users
of fortify_panic, and track whether the failure was a read overflow or
a write overflow, for KUnit tests to examine. Inspired by similar logic
in the slab tests.
Signed-off-by: Kees Cook <[email protected]>
|
|
In order for CI systems to notice all the skipped tests related to
CONFIG_FORTIFY_SOURCE, allow the FORTIFY_SOURCE KUnit tests to build
with or without CONFIG_FORTIFY_SOURCE.
Signed-off-by: Kees Cook <[email protected]>
|
|
In preparation for KUnit testing and further improvements in fortify
failure reporting, split out the report and encode the function and access
failure (read or write overflow) into a single u8 argument. This mainly
ends up saving a tiny bit of space in the data segment. For a defconfig
with FORTIFY_SOURCE enabled:
$ size gcc/vmlinux.before gcc/vmlinux.after
text data bss dec hex filename
26132309 9760658 2195460 38088427 2452eeb gcc/vmlinux.before
26132386 9748382 2195460 38076228 244ff44 gcc/vmlinux.after
Reviewed-by: Alexander Lobakin <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
Mark the various refcount_t functions with __signed_wrap, as we depend
on the wrapping behavior to detect the overflow and perform saturation.
Silences warnings seen with the LKDTM REFCOUNT_* tests:
UBSAN: signed-integer-overflow in ../include/linux/refcount.h:189:11
2147483647 + 1 cannot be represented in type 'int'
Reviewed-by: Miguel Ojeda <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
include/linux/overflow.h includes helper macros intended for calculating
sizes of allocations. These macros prevent accidental overflow by
saturating at SIZE_MAX.
In general when calculating such sizes use of the macros is preferred. Add
a semantic patch which can detect code patterns which can be replaced by
struct_size.
Note that I set the confidence to medium because this patch doesn't make an
attempt to ensure that the relevant array is actually a flexible array. The
struct_size macro does specifically require a flexible array. In many cases
the detected code could be refactored to a flexible array, but this is not
always possible (such as if there are multiple over-allocations).
Signed-off-by: Jacob Keller <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Add rules for finding places where str_plural() can be used. This
currently finds:
54 files changed, 62 insertions(+), 61 deletions(-)
Co-developed-by: Michal Wajdeczko <[email protected]>
Signed-off-by: Michal Wajdeczko <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Kees Cook <[email protected]>
|
|
Add str_plural() helper to replace existing open implementations
used by many drivers and help improve future user facing messages.
Signed-off-by: Michal Wajdeczko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
This allows replacements of the idioms "var += offset" and "var -=
offset" with the wrapping_assign_add() and wrapping_assign_sub() helpers
respectively. They will avoid wrap-around sanitizer instrumentation.
Add to the selftests to validate behavior and lack of side-effects.
Reviewed-by: Marco Elver <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
Provide helpers that will perform wrapping addition, subtraction, or
multiplication without tripping the arithmetic wrap-around sanitizers. The
first argument is the type under which the wrap-around should happen
with. In other words, these two calls will get very different results:
wrapping_mul(int, 50, 50) == 2500
wrapping_mul(u8, 50, 50) == 196
Add to the selftests to validate behavior and lack of side-effects.
Reviewed-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
The check_*_overflow() helpers will return results with potentially
wrapped-around values. These values have always been checked by the
selftests, so avoid the confusing language in the kern-doc. The idea of
"safe for use" was relative to the expectation of whether or not the
caller wants a wrapped value -- the calculation itself will always follow
arithmetic wrapping rules.
Reviewed-by: Gustavo A. R. Silva <[email protected]>
Acked-by: Mark Rutland <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
The wordpart.h header is collecting APIs related to the handling
parts of the word (usually in byte granularity). The upper_*_bits()
and lower_*_bits() are good candidates to be moved to there.
This helps to clean up header dependency hell with regard to kernel.h
as the latter gathers completely unrelated stuff together and slows
down compilation (especially when it's included into other header).
Signed-off-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Reviewed-by: Randy Dunlap <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
KFENCE is not a security mitigation mechanism (due to sampling), but has
the performance characteristics of unintrusive hardening techniques.
When used at scale, however, it improves overall security by allowing
kernel developers to detect heap memory-safety bugs cheaply.
Link: https://lkml.kernel.org/r/[email protected]
Cc: Matthieu Baerts <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Signed-off-by: Marco Elver <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Commit 94f8f319cbcb ("drm: Remove Kconfig option for legacy support
(CONFIG_DRM_LEGACY)") removes the config DRM_LEGACY, but one reference to
that config is left in the hardening.config fragment.
As there is no drm legacy driver left, we do not need to recommend this
attack surface reduction anymore.
Drop this reference in hardening.config fragment.
Signed-off-by: Lukas Bulwahn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Commit 7a628f818499 ("ubsan: Remove CONFIG_UBSAN_SANITIZE_ALL") removes the
config UBSAN_SANITIZE_ALL, but one reference to that config is left in the
hardening.config fragment.
Drop this reference in hardening.config fragment.
Note that CONFIG_UBSAN is still enabled in the hardening.config fragment,
so the functionality when using this fragment remains the same.
Signed-off-by: Lukas Bulwahn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
The ARCH=um build has its own idea about strscpy()'s definition. Adjust
the callers to remove the redundant sizeof() arguments ahead of treewide
changes, since it needs a manual adjustment for the newly named
sized_strscpy() export.
Cc: Richard Weinberger <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Similar to strscpy(), update strscpy_pad()'s 3rd argument to be
optional when the destination is a compile-time known size array.
Cc: Andy Shevchenko <[email protected]>
Cc: <[email protected]>
Reviewed-by: Justin Stitt <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
Using sizeof(dst) for the "size" argument in strscpy() is the
overwhelmingly common case. Instead of requiring this everywhere, allow a
2-argument version to be used that will use the sizeof() internally. There
are other functions in the kernel with optional arguments[1], so this
isn't unprecedented, and improves readability. Update and relocate the
kern-doc for strscpy() too, and drop __HAVE_ARCH_STRSCPY as it is unused.
Adjust ARCH=um build to notice the changed export name, as it doesn't
do full header includes for the string helpers.
This could additionally let us save a few hundred lines of code:
1177 files changed, 2455 insertions(+), 3026 deletions(-)
with a treewide cleanup using Coccinelle:
@needless_arg@
expression DST, SRC;
@@
strscpy(DST, SRC
-, sizeof(DST)
)
Link: https://elixir.bootlin.com/linux/v6.7/source/include/linux/pci.h#L1517 [1]
Reviewed-by: Justin Stitt <[email protected]>
Cc: Andy Shevchenko <[email protected]>
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
In preparation for making strscpy_pad()'s 3rd argument optional, redefine
it as a macro. This also has the benefit of allowing greater FORITFY
introspection, as it couldn't see into the strscpy() nor the memset()
within strscpy_pad().
Cc: Andy Shevchenko <[email protected]>
Cc: Andrew Morton <[email protected]>
Cc: <[email protected]>
Reviewed-by: Justin Stitt <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
In order to mitigate unexpected signed wrap-around[1], bring back the
signed integer overflow sanitizer. It was removed in commit 6aaa31aeb9cf
("ubsan: remove overflow checks") because it was effectively a no-op
when combined with -fno-strict-overflow (which correctly changes signed
overflow from being "undefined" to being explicitly "wrap around").
Compilers are adjusting their sanitizers to trap wrap-around and to
detecting common code patterns that should not be instrumented
(e.g. "var + offset < var"). Prepare for this and explicitly rename
the option from "OVERFLOW" to "WRAP" to more accurately describe the
behavior.
To annotate intentional wrap-around arithmetic, the helpers
wrapping_add/sub/mul_wrap() can be used for individual statements. At
the function level, the __signed_wrap attribute can be used to mark an
entire function as expecting its signed arithmetic to wrap around. For a
single object file the Makefile can use "UBSAN_SIGNED_WRAP_target.o := n"
to mark it as wrapping, and for an entire directory, "UBSAN_SIGNED_WRAP :=
n" can be used.
Additionally keep these disabled under CONFIG_COMPILE_TEST for now.
Link: https://github.com/KSPP/linux/issues/26 [1]
Cc: Miguel Ojeda <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Hao Luo <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Reviewed-by: Justin Stitt <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
For simplicity in splitting out UBSan options into separate rules,
remove CONFIG_UBSAN_SANITIZE_ALL, effectively defaulting to "y", which
is how it is generally used anyway. (There are no ":= y" cases beyond
where a specific file is enabled when a top-level ":= n" is in effect.)
Cc: Andrey Konovalov <[email protected]>
Cc: Marco Elver <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Silence a handful of W=1 warnings in the UBSan selftest, which set
variables without using them. For example:
lib/test_ubsan.c:101:6: warning: variable 'val1' set but not used [-Wunused-but-set-variable]
101 | int val1 = 10;
| ^
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Reviewed-by: Marco Elver <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
Clang changed the way it enables UBSan trapping mode. Update the Makefile
logic to discover it.
Suggested-by: Fangrui Song <[email protected]>
Link: https://lore.kernel.org/lkml/CAFP8O3JivZh+AAV7N90Nk7U2BHRNST6MRP0zHtfQ-Vj0m4+pDA@mail.gmail.com/
Reviewed-by: Fangrui Song <[email protected]>
Reviewed-by: Justin Stitt <[email protected]>
Cc: Nathan Chancellor <[email protected]>
Cc: Masahiro Yamada <[email protected]>
Cc: Nicolas Schier <[email protected]>
Cc: Nick Desaulniers <[email protected]>
Cc: Bill Wendling <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
The kernel hardening efforts have continued to depend more and more
heavily on UBSAN, so make an actual MAINTAINERS entry for it.
Cc: Andrey Ryabinin <[email protected]>
Acked-by: Andrey Konovalov <[email protected]>
Acked-by: Marco Elver <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
Syzkaller hit 'WARNING in dg_dispatch_as_host' bug.
memcpy: detected field-spanning write (size 56) of single field "&dg_info->msg"
at drivers/misc/vmw_vmci/vmci_datagram.c:237 (size 24)
WARNING: CPU: 0 PID: 1555 at drivers/misc/vmw_vmci/vmci_datagram.c:237
dg_dispatch_as_host+0x88e/0xa60 drivers/misc/vmw_vmci/vmci_datagram.c:237
Some code commentry, based on my understanding:
544 #define VMCI_DG_SIZE(_dg) (VMCI_DG_HEADERSIZE + (size_t)(_dg)->payload_size)
/// This is 24 + payload_size
memcpy(&dg_info->msg, dg, dg_size);
Destination = dg_info->msg ---> this is a 24 byte
structure(struct vmci_datagram)
Source = dg --> this is a 24 byte structure (struct vmci_datagram)
Size = dg_size = 24 + payload_size
{payload_size = 56-24 =32} -- Syzkaller managed to set payload_size to 32.
35 struct delayed_datagram_info {
36 struct datagram_entry *entry;
37 struct work_struct work;
38 bool in_dg_host_queue;
39 /* msg and msg_payload must be together. */
40 struct vmci_datagram msg;
41 u8 msg_payload[];
42 };
So those extra bytes of payload are copied into msg_payload[], a run time
warning is seen while fuzzing with Syzkaller.
One possible way to fix the warning is to split the memcpy() into
two parts -- one -- direct assignment of msg and second taking care of payload.
Gustavo quoted:
"Under FORTIFY_SOURCE we should not copy data across multiple members
in a structure."
Reported-by: syzkaller <[email protected]>
Suggested-by: Vegard Nossum <[email protected]>
Suggested-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Harshit Mogalapalli <[email protected]>
Reviewed-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Use struct_size() instead of open coding.
Suggested-by: Gustavo A. R. Silva <[email protected]>
Signed-off-by: Harshit Mogalapalli <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Reviewed-by: Gustavo A. R. Silva <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
CAP_SYSLOG was separated from CAP_SYS_ADMIN and introduced in Linux
2.6.37 (2010-11). For a long time, certain syslog actions required
CAP_SYS_ADMIN or CAP_SYSLOG. Maybe it’s time to officially remove
CAP_SYS_ADMIN for more fine-grained control.
CAP_SYS_ADMIN was once removed but added back for backwards
compatibility reasons. In commit 38ef4c2e437d ("syslog: check cap_syslog
when dmesg_restrict") (2010-12), CAP_SYS_ADMIN was no longer needed. And
in commit ee24aebffb75 ("cap_syslog: accept CAP_SYS_ADMIN for now")
(2011-02), it was accepted again. Since then, CAP_SYS_ADMIN has been
preserved.
Now that almost 13 years have passed, the legacy application may have
had enough time to be updated.
Signed-off-by: Jingzi Meng <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
This diff uses an open source tool include-what-you-use (IWYU) to modify
the include list, changing indirect includes to direct includes. IWYU is
implemented using the IWYUScripts github repository which is a tool that
is currently undergoing development. These changes seek to improve build
times.
This change to lib/string.c resulted in a preprocessed size of
lib/string.i from 26371 lines to 5321 lines (-80%) for the x86
defconfig.
Link: https://github.com/ClangBuiltLinux/IWYUScripts
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Tanzir Hasan <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
This patch creates wordpart.h and includes it in asm/word-at-a-time.h
for all architectures. WORD_AT_A_TIME_CONSTANTS depends on kernel.h
because of REPEAT_BYTE. Moving this to another header and including it
where necessary allows us to not include the bloated kernel.h. Making
this implicit dependency on REPEAT_BYTE explicit allows for later
improvements in the lib/string.c inclusion list.
Suggested-by: Al Viro <[email protected]>
Suggested-by: Andy Shevchenko <[email protected]>
Signed-off-by: Tanzir Hasan <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
In commit edb6538da3df ("lkdtm/bugs: Adjust lkdtm_HUNG_TASK() to avoid
tail call optimization") we marked lkdtm_HUNG_TASK() as
__noreturn. The compiler gets unhappy if it thinks a __noreturn
function might return, so there's a BUG_ON(1) at the end. Any human
can see that the function won't return and the compiler can figure
that out too. Except when it can't.
The MIPS architecture defines HAVE_ARCH_BUG_ON and defines its own
version of BUG_ON(). The MIPS version of BUG_ON() is not a macro but
is instead an inline function. Apparently this prevents the compiler
from realizing that the condition to BUG_ON() is constant and that the
function will never return.
Let's change the BUG_ON(1) to just BUG(), which it should have been to
begin with. The only reason I used BUG_ON(1) to begin with was because
I was used to using WARN_ON(1) when writing test code and WARN() and
BUG() are oddly inconsistent in this manner. :-/
Fixes: edb6538da3df ("lkdtm/bugs: Adjust lkdtm_HUNG_TASK() to avoid tail call optimization")
Signed-off-by: Douglas Anderson <[email protected]>
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Acked-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/20240126072852.1.Ib065e528a8620474a72f15baa2feead1f3d89865@changeid
Signed-off-by: Kees Cook <[email protected]>
|
|
When testing with lkdtm_HUNG_TASK() and looking at the output, I
expected to see lkdtm_HUNG_TASK() in the stack crawl but it wasn't
there. Instead, the top function on at least some devices was
schedule() due to tail call optimization.
Let's do two things to help here:
1. We'll mark this as "__noreturn". On GCC at least this is documented
to prevent tail call optimization. The docs [1] say "In order to
preserve backtraces, GCC will never turn calls to noreturn
functions into tail calls."
2. We'll add a BUG_ON(1) at the end which means that schedule() is no
longer a tail call. Note that this is potentially important because
if we _did_ end up returning from schedule() due to some weird
issue then we'd potentially be violating the "noreturn" that we
told the compiler about. BUG is the right thing to do here.
[1] https://gcc.gnu.org/onlinedocs/gcc/Common-Function-Attributes.html
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://lore.kernel.org/r/20240122164935.2.I26e8f68c312824fcc80c19d4e91de2d2bef958f0@changeid
Signed-off-by: Kees Cook <[email protected]>
|
|
The comments for lkdtm_do_action() explicitly call out that it
shouldn't be inlined because we want it to show up in stack
crawls. However, at least with some compilers / options it's still
vanishing due to tail call optimization. Let's add a return value to
the function to make it harder for the compiler to do tail call
optimization here.
Now that we have a return value, we can actually use it in the
callers, which is a minor improvement in the code.
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://lore.kernel.org/r/20240122164935.1.I345e485f36babad76370c59659a706723750d950@changeid
Signed-off-by: Kees Cook <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull cxl fixes from Dan Williams:
"A build regression fix, a device compatibility fix, and an original
bug preventing creation of large (16 device) interleave sets:
- Fix unit test build regression fallout from global
"missing-prototypes" change
- Fix compatibility with devices that do not support interrupts
- Fix overflow when calculating the capacity of large interleave sets"
* tag 'cxl-fixes-6.8-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl/region：Fix overflow issue in alloc_hpa()
cxl/pci: Skip irq features if MSI/MSI-X are not supported
tools/testing/nvdimm: Disable "missing prototypes / declarations" warnings
tools/testing/cxl: Disable "missing prototypes / declarations" warnings
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS fixes from Thomas Bogendoerfer:
- fix boot issue on single core Lantiq Danube devices
- fix boot issue on Loongson64 platforms
- fix improper FPU setup
- fix missing prototypes issues
* tag 'mips-fixes_6.8_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Call lose_fpu(0) before initializing fcr31 in mips_set_personality_nan
MIPS: loongson64: set nid for reserved memblock region
Revert "MIPS: loongson64: set nid for reserved memblock region"
MIPS: lantiq: register smp_ops on non-smp platforms
MIPS: loongson64: set nid for reserved memblock region
MIPS: reserve exception vector space ONLY ONCE
MIPS: BCM63XX: Fix missing prototypes
MIPS: sgi-ip32: Fix missing prototypes
MIPS: sgi-ip30: Fix missing prototypes
MIPS: fw arc: Fix missing prototypes
MIPS: sgi-ip27: Fix missing prototypes
MIPS: Alchemy: Fix missing prototypes
MIPS: Cobalt: Fix missing prototypes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull locking fix from Borislav Petkov:
- Prevent an inconsistent futex operation leading to stale state
exposure
* tag 'locking_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Prevent the reuse of stale pi_state
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Borislav Petkov:
- Initialize the resend node of each IRQ descriptor, not only the first
one
* tag 'irq_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Initialize resend_node hlist for all interrupt descriptors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fixes from Borislav Petkov:
- Preserve the number of idle calls and sleep entries across CPU
hotplug events in order to be able to compute correct averages
- Limit the duration of the clocksource watchdog checking interval as
too long intervals lead to wrongly marking the TSC as unstable
* tag 'timers_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/sched: Preserve number of idle sleeps across CPU hotplug events
clocksource: Skip watchdog check for large watchdog intervals
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- Make sure 32-bit syscall registers are properly sign-extended
- Add detection for AMD's Zen5 generation CPUs and Intel's Clearwater
Forest CPU model number
- Make a stub function export non-GPL because it is part of the
paravirt alternatives and that can be used by non-GPL code
* tag 'x86_urgent_for_v6.8_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: Add more models to X86_FEATURE_ZEN5
x86/entry/ia32: Ensure s32 is sign extended to s64
x86/cpu: Add model number for Intel Clearwater Forest processor
x86/CPU/AMD: Add X86_FEATURE_ZEN5
x86/paravirt: Make BUG_func() usable by non-GPL modules
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull memblock fix from Mike Rapoport:
"Fix crash when reserved memory is not added to memory.
When CONFIG_DEFERRED_STRUCT_PAGE_INIT is enabled, the initialization
of reserved pages may cause access of NODE_DATA() with invalid nid and
crash.
Add a fall back to early_pfn_to_nid() in memmap_init_reserved_pages()
to ensure a valid node id is always passed to init_reserved_page()"
* tag 'fixes-2024-01-28' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
memblock: fix crash when reserved memory is not added to memory
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
- WMI bus driver fixes
- Second attempt (previously reverted) at P2SB PCI rescan deadlock fix
- AMD PMF driver improvements
- MAINTAINERS updates
- Misc other small fixes and hw-id additions
* tag 'platform-drivers-x86-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: touchscreen_dmi: Add info for the TECLAST X16 Plus tablet
platform/x86/intel/ifs: Call release_firmware() when handling errors.
platform/x86/amd/pmf: Fix memory leak in amd_pmf_get_pb_data()
platform/x86/amd/pmf: Get ambient light information from AMD SFH driver
platform/x86/amd/pmf: Get Human presence information from AMD SFH driver
platform/mellanox: mlxbf-pmc: Fix offset calculation for crspace events
platform/mellanox: mlxbf-tmfifo: Drop Tx network packet when Tx TmFIFO is full
MAINTAINERS: remove defunct acpi4asus project info from asus notebooks section
MAINTAINERS: add Luke Jones as maintainer for asus notebooks
MAINTAINERS: Remove Perry Yuan as DELL WMI HARDWARE PRIVACY SUPPORT maintainer
platform/x86: silicom-platform: Add missing "Description:" for power_cycle sysfs attr
platform/x86: intel-wmi-sbl-fw-update: Fix function name in error message
platform/x86: p2sb: Use pci_resource_n() in p2sb_read_bar0()
platform/x86: p2sb: Allow p2sb_bar() calls during PCI device probe
platform/x86: intel-uncore-freq: Fix types in sysfs callbacks
platform/x86: wmi: Fix wmi_dev_probe()
platform/x86: wmi: Fix notify callback locking
platform/x86: wmi: Decouple legacy WMI notify handlers from wmi_block_list
platform/x86: wmi: Return immediately if an suitable WMI event is found
platform/x86: wmi: Fix error handling in legacy WMI notify handler functions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Fix boot failure on machines with more than 8 nodes, and fix two build
errors about KVM"
* tag 'loongarch-fixes-6.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Add returns to SIMD stubs
LoongArch: KVM: Fix build due to API changes
LoongArch/smp: Call rcutree_report_cpu_starting() at tlb_init()
|
|
Pull xfs fix from Chandan Babu:
- Fix read only mounts when using fsopen mount API
* tag 'xfs-6.8-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: read only mounts with fsopen mount API are busted
|
|
Pull bcachefs fixes from Kent Overstreet:
- fix for REQ_OP_FLUSH usage; this fixes filesystems going read only
with -EOPNOTSUPP from the block layer.
(this really should have gone in with the block layer patch causing
the -EOPNOTSUPP, or should have gone in before).
- fix an allocation in non-sleepable context
- fix one source of srcu lock latency, on devices with terrible discard
latency
- fix a reattach_inode() issue in fsck
* tag 'bcachefs-2024-01-26' of https://evilpiepirate.org/git/bcachefs:
bcachefs: __lookup_dirent() works in snapshot, not subvol
bcachefs: discard path uses unlock_long()
bcachefs: fix incorrect usage of REQ_OP_FLUSH
bcachefs: Add gfp flags param to bch2_prt_task_backtrace()
|
|
Pull smb server fixes from Steve French:
- Fix netlink OOB
- Minor kernel doc fix
* tag '6.8-rc2-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix global oob in ksmbd_nl_policy
smb: Fix some kernel-doc comments
|
|
Pull smb client fixes from Steve French:
"Nine cifs/smb client fixes
- Four network error fixes (three relating to replays of requests
that need to be retried, and one fixing some places where we were
returning the wrong rc up the stack on network errors)
- Two multichannel fixes including locking fix and case where subset
of channels need reconnect
- netfs integration fixup: share remote i_size with netfslib
- Two small cleanups (one for addressing a clang warning)"
* tag '6.8-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix stray unlock in cifs_chan_skip_or_disable
cifs: set replay flag for retries of write command
cifs: commands that are retried should have replay flag set
cifs: helper function to check replayable error codes
cifs: translate network errors on send to -ECONNABORTED
cifs: cifs_pick_channel should try selecting active channels
cifs: Share server EOF pos with netfslib
smb: Work around Clang __bdos() type confusion
smb: client: delete "true", "false" defines
|
|
If we still own the FPU after initializing fcr31, when we are preempted
the dirty value in the FPU will be read out and stored into fcr31,
clobbering our setting. This can cause an improper floating-point
environment after execve(). For example:
zsh% cat measure.c
#include <fenv.h>
int main() { return fetestexcept(FE_INEXACT); }
zsh% cc measure.c -o measure -lm
zsh% echo $((1.0/3)) # raising FE_INEXACT
0.33333333333333331
zsh% while ./measure; do ; done
(stopped in seconds)
Call lose_fpu(0) before setting fcr31 to prevent this.
Closes: https://lore.kernel.org/linux-mips/[email protected]/
Fixes: 9b26616c8d9d ("MIPS: Respect the ISA level in FCSR handling")
Cc: [email protected]
Signed-off-by: Xi Ruoyao <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Commit 61167ad5fecd("mm: pass nid to reserve_bootmem_region()") reveals
that reserved memblock regions have no valid node id set, just set it
right since loongson64 firmware makes it clear in memory layout info.
This works around booting failure on 3A1000+ since commit 61167ad5fecd
("mm: pass nid to reserve_bootmem_region()") under
CONFIG_DEFERRED_STRUCT_PAGE_INIT.
Signed-off-by: Huang Pei <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
This reverts commit ce7b1b97776ec0b068c4dd6b6dbb48ae09a23519.
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|