aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-04-11Merge tag 'kvm-riscv-fixes-5.18-1' of https://github.com/kvm-riscv/linux ↵Paolo Bonzini4-4/+5
into HEAD KVM/riscv fixes for 5.18, take #1 - Remove hgatp zeroing in kvm_arch_vcpu_put() - Fix alignment of the guest_hang() in KVM selftest - Fix PTE A and D bits in KVM selftest - Missing #include in vcpu_fp.c
2022-04-11drm/msm/dp: add fail safe mode outside of event_mutex contextKuogee Hsieh3-10/+17
There is possible circular locking dependency detected on event_mutex (see below logs). This is due to set fail safe mode is done at dp_panel_read_sink_caps() within event_mutex scope. To break this possible circular locking, this patch move setting fail safe mode out of event_mutex scope. [ 23.958078] ====================================================== [ 23.964430] WARNING: possible circular locking dependency detected [ 23.970777] 5.17.0-rc2-lockdep-00088-g05241de1f69e #148 Not tainted [ 23.977219] ------------------------------------------------------ [ 23.983570] DrmThread/1574 is trying to acquire lock: [ 23.988763] ffffff808423aab0 (&dp->event_mutex){+.+.}-{3:3}, at: msm_dp_displ ay_enable+0x58/0x164 [ 23.997895] [ 23.997895] but task is already holding lock: [ 24.003895] ffffff808420b280 (&kms->commit_lock[i]/1){+.+.}-{3:3}, at: lock_c rtcs+0x80/0x8c [ 24.012495] [ 24.012495] which lock already depends on the new lock. [ 24.012495] [ 24.020886] [ 24.020886] the existing dependency chain (in reverse order) is: [ 24.028570] [ 24.028570] -> #5 (&kms->commit_lock[i]/1){+.+.}-{3:3}: [ 24.035472] __mutex_lock+0xc8/0x384 [ 24.039695] mutex_lock_nested+0x54/0x74 [ 24.044272] lock_crtcs+0x80/0x8c [ 24.048222] msm_atomic_commit_tail+0x1e8/0x3d0 [ 24.053413] commit_tail+0x7c/0xfc [ 24.057452] drm_atomic_helper_commit+0x158/0x15c [ 24.062826] drm_atomic_commit+0x60/0x74 [ 24.067403] drm_mode_atomic_ioctl+0x6b0/0x908 [ 24.072508] drm_ioctl_kernel+0xe8/0x168 [ 24.077086] drm_ioctl+0x320/0x370 [ 24.081123] drm_compat_ioctl+0x40/0xdc [ 24.085602] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.090895] invoke_syscall+0x80/0x114 [ 24.095294] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.100668] do_el0_svc_compat+0x2c/0x54 [ 24.105242] el0_svc_compat+0x4c/0xe4 [ 24.109548] el0t_32_sync_handler+0xc4/0xf4 [ 24.114381] el0t_32_sync+0x178 [ 24.118688] [ 24.118688] -> #4 (&kms->commit_lock[i]){+.+.}-{3:3}: [ 24.125408] __mutex_lock+0xc8/0x384 [ 24.129628] mutex_lock_nested+0x54/0x74 [ 24.134204] lock_crtcs+0x80/0x8c [ 24.138155] msm_atomic_commit_tail+0x1e8/0x3d0 [ 24.143345] commit_tail+0x7c/0xfc [ 24.147382] drm_atomic_helper_commit+0x158/0x15c [ 24.152755] drm_atomic_commit+0x60/0x74 [ 24.157323] drm_atomic_helper_set_config+0x68/0x90 [ 24.162869] drm_mode_setcrtc+0x394/0x648 [ 24.167535] drm_ioctl_kernel+0xe8/0x168 [ 24.172102] drm_ioctl+0x320/0x370 [ 24.176135] drm_compat_ioctl+0x40/0xdc [ 24.180621] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.185904] invoke_syscall+0x80/0x114 [ 24.190302] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.195673] do_el0_svc_compat+0x2c/0x54 [ 24.200241] el0_svc_compat+0x4c/0xe4 [ 24.204544] el0t_32_sync_handler+0xc4/0xf4 [ 24.209378] el0t_32_sync+0x174/0x178 [ 24.213680] -> #3 (crtc_ww_class_mutex){+.+.}-{3:3}: [ 24.220308] __ww_mutex_lock.constprop.20+0xe8/0x878 [ 24.225951] ww_mutex_lock+0x60/0xd0 [ 24.230166] modeset_lock+0x190/0x19c [ 24.234467] drm_modeset_lock+0x34/0x54 [ 24.238953] drmm_mode_config_init+0x550/0x764 [ 24.244065] msm_drm_bind+0x170/0x59c [ 24.248374] try_to_bring_up_master+0x244/0x294 [ 24.253572] __component_add+0xf4/0x14c [ 24.258057] component_add+0x2c/0x38 [ 24.262273] dsi_dev_attach+0x2c/0x38 [ 24.266575] dsi_host_attach+0xc4/0x120 [ 24.271060] mipi_dsi_attach+0x34/0x48 [ 24.275456] devm_mipi_dsi_attach+0x28/0x68 [ 24.280298] ti_sn_bridge_probe+0x2b4/0x2dc [ 24.285137] auxiliary_bus_probe+0x78/0x90 [ 24.289893] really_probe+0x1e4/0x3d8 [ 24.294194] __driver_probe_device+0x14c/0x164 [ 24.299298] driver_probe_device+0x54/0xf8 [ 24.304043] __device_attach_driver+0xb4/0x118 [ 24.309145] bus_for_each_drv+0xb0/0xd4 [ 24.313628] __device_attach+0xcc/0x158 [ 24.318112] device_initial_probe+0x24/0x30 [ 24.322954] bus_probe_device+0x38/0x9c [ 24.327439] deferred_probe_work_func+0xd4/0xf0 [ 24.332628] process_one_work+0x2f0/0x498 [ 24.337289] process_scheduled_works+0x44/0x48 [ 24.342391] worker_thread+0x1e4/0x26c [ 24.346788] kthread+0xe4/0xf4 [ 24.350470] ret_from_fork+0x10/0x20 [ 24.354683] [ 24.354683] [ 24.354683] -> #2 (crtc_ww_class_acquire){+.+.}-{0:0}: [ 24.361489] drm_modeset_acquire_init+0xe4/0x138 [ 24.366777] drm_helper_probe_detect_ctx+0x44/0x114 [ 24.372327] check_connector_changed+0xbc/0x198 [ 24.377517] drm_helper_hpd_irq_event+0xcc/0x11c [ 24.382804] dsi_hpd_worker+0x24/0x30 [ 24.387104] process_one_work+0x2f0/0x498 [ 24.391762] worker_thread+0x1d0/0x26c [ 24.396158] kthread+0xe4/0xf4 [ 24.399840] ret_from_fork+0x10/0x20 [ 24.404053] [ 24.404053] -> #1 (&dev->mode_config.mutex){+.+.}-{3:3}: [ 24.411032] __mutex_lock+0xc8/0x384 [ 24.415247] mutex_lock_nested+0x54/0x74 [ 24.419819] dp_panel_read_sink_caps+0x23c/0x26c [ 24.425108] dp_display_process_hpd_high+0x34/0xd4 [ 24.430570] dp_display_usbpd_configure_cb+0x30/0x3c [ 24.436205] hpd_event_thread+0x2ac/0x550 [ 24.440864] kthread+0xe4/0xf4 [ 24.444544] ret_from_fork+0x10/0x20 [ 24.448757] [ 24.448757] -> #0 (&dp->event_mutex){+.+.}-{3:3}: [ 24.455116] __lock_acquire+0xe2c/0x10d8 [ 24.459690] lock_acquire+0x1ac/0x2d0 [ 24.463988] __mutex_lock+0xc8/0x384 [ 24.468201] mutex_lock_nested+0x54/0x74 [ 24.472773] msm_dp_display_enable+0x58/0x164 [ 24.477789] dp_bridge_enable+0x24/0x30 [ 24.482273] drm_atomic_bridge_chain_enable+0x78/0x9c [ 24.488006] drm_atomic_helper_commit_modeset_enables+0x1bc/0x244 [ 24.494801] msm_atomic_commit_tail+0x248/0x3d0 [ 24.499992] commit_tail+0x7c/0xfc [ 24.504031] drm_atomic_helper_commit+0x158/0x15c [ 24.509404] drm_atomic_commit+0x60/0x74 [ 24.513976] drm_mode_atomic_ioctl+0x6b0/0x908 [ 24.519079] drm_ioctl_kernel+0xe8/0x168 [ 24.523650] drm_ioctl+0x320/0x370 [ 24.527689] drm_compat_ioctl+0x40/0xdc [ 24.532175] __arm64_compat_sys_ioctl+0xe0/0x150 [ 24.537463] invoke_syscall+0x80/0x114 [ 24.541861] el0_svc_common.constprop.3+0xc4/0xf8 [ 24.547235] do_el0_svc_compat+0x2c/0x54 [ 24.551806] el0_svc_compat+0x4c/0xe4 [ 24.556106] el0t_32_sync_handler+0xc4/0xf4 [ 24.560948] el0t_32_sync+0x174/0x178 Changes in v2: -- add circular lockiing trace Fixes: d4aca422539c ("drm/msm/dp: always add fail-safe mode into connector mode list") Signed-off-by: Kuogee Hsieh <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/481396/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2022-04-11drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init()Stephen Boyd1-1/+1
The member 'msm_dsi->connector' isn't assigned until msm_dsi_manager_connector_init() returns (see msm_dsi_modeset_init() and how it assigns the return value). Therefore this pointer is going to be NULL here. Let's use 'connector' which is what was intended. Cc: Dmitry Baryshkov <[email protected]> Cc: Sean Paul <[email protected]> Fixes: 6d5e78406991 ("drm/msm/dsi: Move dsi panel init into modeset init path") Signed-off-by: Stephen Boyd <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/478693/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2022-04-11drm/msm: Stop using iommu_present()Robin Murphy1-1/+1
Even if some IOMMU has registered itself on the platform "bus", that doesn't necessarily mean it provides translation for the device we care about. Replace iommu_present() with a more appropriate check. Signed-off-by: Robin Murphy <[email protected]> Reviewed-by: Rob Clark <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/480707/ Link: https://lore.kernel.org/r/5ab4f4574d7f3e042261da702d493ee40d003356.1649168268.git.robin.murphy@arm.com Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2022-04-11drm/msm/mdp5: check the return of kzalloc()Xiaoke Wang1-0/+3
kzalloc() is a memory allocation function which can return NULL when some internal memory errors happen. So it is better to check it to prevent potential wrong memory access. Besides, since mdp5_plane_reset() is void type, so we should better set `plane-state` to NULL after releasing it. Signed-off-by: Xiaoke Wang <[email protected]> Reviewed-by: Dmitry Baryshkov <[email protected]> Patchwork: https://patchwork.freedesktop.org/patch/481055/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Dmitry Baryshkov <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2022-04-11drm/msm: Fix range size vs end confusionRob Clark1-1/+1
The fourth param is size, rather than range_end. Note that we could increase the address space size if we had a way to prevent buffers from spanning a 4G split, mostly just to avoid fw bugs with 64b math. Fixes: 84c31ee16f90 ("drm/msm/a6xx: Add support for per-instance pagetables") Signed-off-by: Rob Clark <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Rob Clark <[email protected]>
2022-04-11ipv6: fix panic when forwarding a pkt with no in6 devNicolas Dichtel1-1/+1
kongweibin reported a kernel panic in ip6_forward() when input interface has no in6 dev associated. The following tc commands were used to reproduce this panic: tc qdisc del dev vxlan100 root tc qdisc add dev vxlan100 root netem corrupt 5% CC: [email protected] Fixes: ccd27f05ae7b ("ipv6: fix 'disable_policy' for fwd packets") Reported-by: kongweibin <[email protected]> Signed-off-by: Nicolas Dichtel <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-11dpaa_eth: Fix missing of_node_put in dpaa_get_ts_info()Lv Ruyi1-2/+6
Both of of_get_parent() and of_parse_phandle() return node pointer with refcount incremented, use of_node_put() on it to decrease refcount when done. Reported-by: Zeal Robot <[email protected]> Signed-off-by: Lv Ruyi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-11netfilter: nft_socket: make cgroup match work in input tooFlorian Westphal1-4/+3
cgroupv2 helper function ignores the already-looked up sk and uses skb->sk instead. Just pass sk from the calling function instead; this will make cgroup matching work for udp and tcp in input even when edemux did not set skb->sk already. Fixes: e0bb96db96f8 ("netfilter: nft_socket: add support for cgroupsv2") Signed-off-by: Florian Westphal <[email protected]> Tested-by: Topi Miettinen <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-04-11mac80211: fix ht_capa printout in debugfsBen Greear1-1/+1
Don't use sizeof(pointer) when calculating scnprintf offset. Fixes: 01f84f0ed3b4 ("mac80211: reduce stack usage in debugfs") Signed-off-by: Ben Greear <[email protected]> Link: https://lore.kernel.org/r/[email protected] [correct the Fixes tag] Signed-off-by: Johannes Berg <[email protected]>
2022-04-11cfg80211: hold bss_lock while updating nontrans_listRameshkumar Sundaram1-0/+2
Synchronize additions to nontrans_list of transmitting BSS with bss_lock to avoid races. Also when cfg80211_add_nontrans_list() fails __cfg80211_unlink_bss() needs bss_lock to be held (has lockdep assert on bss_lock). So protect the whole block with bss_lock to avoid races and warnings. Found during code review. Fixes: 0b8fb8235be8 ("cfg80211: Parsing of Multiple BSSID information in scanning") Signed-off-by: Rameshkumar Sundaram <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2022-04-11nl80211: correctly check NL80211_ATTR_REG_ALPHA2 sizeJohannes Berg1-1/+2
We need this to be at least two bytes, so we can access alpha2[0] and alpha2[1]. It may be three in case some userspace used NUL-termination since it was NLA_STRING (and we also push it out with NUL-termination). Cc: [email protected] Reported-by: Lee Jones <[email protected]> Link: https://lore.kernel.org/r/20220411114201.fd4a31f06541.Ie7ff4be2cf348d8cc28ed0d626fc54becf7ea799@changeid Signed-off-by: Johannes Berg <[email protected]>
2022-04-11net/sched: taprio: Check if socket flags are validBenedikt Spranger1-1/+2
A user may set the SO_TXTIME socket option to ensure a packet is send at a given time. The taprio scheduler has to confirm, that it is allowed to send a packet at that given time, by a check against the packet time schedule. The scheduler drop the packet, if the gates are closed at the given send time. The check, if SO_TXTIME is set, may fail since sk_flags are part of an union and the union is used otherwise. This happen, if a socket is not a full socket, like a request socket for example. Add a check to verify, if the union is used for sk_flags. Fixes: 4cfd5779bd6e ("taprio: Add support for txtime-assist mode") Signed-off-by: Benedikt Spranger <[email protected]> Reviewed-by: Kurt Kanzenbach <[email protected]> Acked-by: Vinicius Costa Gomes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-11net: ethernet: stmmac: fix altr_tse_pcs function when using a fixed-linkDinh Nguyen3-16/+9
When using a fixed-link, the altr_tse_pcs driver crashes due to null-pointer dereference as no phy_device is provided to tse_pcs_fix_mac_speed function. Fix this by adding a check for phy_dev before calling the tse_pcs_fix_mac_speed() function. Also clean up the tse_pcs_fix_mac_speed function a bit. There is no need to check for splitter_base and sgmii_adapter_base because the driver will fail if these 2 variables are not derived from the device tree. Fixes: fb3bbdb85989 ("net: ethernet: Add TSE PCS support to dwmac-socfpga") Signed-off-by: Dinh Nguyen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-11net: phy: LAN87xx: remove genphy_softreset in config_anegArun Ramadoss1-6/+1
When the T1 phy master/slave state is changed, at the end of config_aneg function genphy_softreset is called. After the reset all the registers configured during the config_init are restored to default value. To avoid this, removed the genphy_softreset call. v1->v2 ------ Added the author in cc Fixes: 8a1b415d70b7 ("net: phy: added ethtool master-slave configuration support") Signed-off-by: Arun Ramadoss <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-11x86/tsx: Disable TSX development mode at bootPawan Gupta6-18/+55
A microcode update on some Intel processors causes all TSX transactions to always abort by default[*]. Microcode also added functionality to re-enable TSX for development purposes. With this microcode loaded, if tsx=on was passed on the cmdline, and TSX development mode was already enabled before the kernel boot, it may make the system vulnerable to TSX Asynchronous Abort (TAA). To be on safer side, unconditionally disable TSX development mode during boot. If a viable use case appears, this can be revisited later. [*]: Intel TSX Disable Update for Selected Processors, doc ID: 643557 [ bp: Drop unstable web link, massage heavily. ] Suggested-by: Andrew Cooper <[email protected]> Suggested-by: Borislav Petkov <[email protected]> Signed-off-by: Pawan Gupta <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Tested-by: Neelima Krishnan <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/347bd844da3a333a9793c6687d4e4eb3b2419a3e.1646943780.git.pawan.kumar.gupta@linux.intel.com
2022-04-11genirq/affinity: Consider that CPUs on nodes can be unbalancedRei Yamamoto1-2/+3
If CPUs on a node are offline at boot time, the number of nodes is different when building affinity masks for present cpus and when building affinity masks for possible cpus. This causes the following problem: In the case that the number of vectors is less than the number of nodes there are cases where bits of masks for present cpus are overwritten when building masks for possible cpus. Fix this by excluding CPUs, which are not part of the current build mask (present/possible). [ tglx: Massaged changelog and added comment ] Fixes: b82592199032 ("genirq/affinity: Spread IRQs to all available NUMA nodes") Signed-off-by: Rei Yamamoto <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Ming Lei <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2022-04-11x86/tsx: Use MSR_TSX_CTRL to clear CPUID bitsPawan Gupta2-7/+48
tsx_clear_cpuid() uses MSR_TSX_FORCE_ABORT to clear CPUID.RTM and CPUID.HLE. Not all CPUs support MSR_TSX_FORCE_ABORT, alternatively use MSR_IA32_TSX_CTRL when supported. [ bp: Document how and why TSX gets disabled. ] Fixes: 293649307ef9 ("x86/tsx: Clear CPUID bits when TSX always force aborts") Reported-by: kernel test robot <[email protected]> Signed-off-by: Pawan Gupta <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Tested-by: Neelima Krishnan <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/5b323e77e251a9c8bcdda498c5cc0095be1e1d3c.1646943780.git.pawan.kumar.gupta@linux.intel.com
2022-04-11ALSA: hda/realtek: add quirk for Lenovo Thinkpad X12 speakersTao Jin1-0/+1
For this specific device on Lenovo Thinkpad X12 tablet, the verbs were dumped by qemu running a guest OS that init this codec properly. After studying the dump, it turns out that the same quirk used by the other Lenovo devices can be reused. The patch was tested working against the mainline kernel. Cc: <[email protected]> Signed-off-by: Tao Jin <[email protected]> Link: https://lore.kernel.org/r/CO6PR03MB6241CD73310B37858FE64C85E1E89@CO6PR03MB6241.namprd03.prod.outlook.com Signed-off-by: Takashi Iwai <[email protected]>
2022-04-11ALSA: pcm: Test for "silence" field in struct "pcm_format_data"Fabio M. De Francesco1-1/+1
Syzbot reports "KASAN: null-ptr-deref Write in snd_pcm_format_set_silence".[1] It is due to missing validation of the "silence" field of struct "pcm_format_data" in "pcm_formats" array. Add a test for valid "pat" and, if it is not so, return -EINVAL. [1] https://lore.kernel.org/lkml/[email protected]/ Reported-and-tested-by: [email protected] Signed-off-by: Fabio M. De Francesco <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-04-11drm/i915: Sunset igpu legacy mmap support based on GRAPHICS_VER_FULLMatt Roper1-1/+1
The intent of the version check in the mmap ioctl was to maintain support for existing platforms (i.e., ADL/RPL and earlier), but drop support on all future igpu platforms. As we've seen on the dgpu side, the hardware teams are using a more fine-grained numbering system for IP version numbers these days, so it's possible the version number associated with our next igpu could be some form of "12.xx" rather than 13 or higher. Comparing against the full ver.release number will ensure the intent of the check is maintained no matter what numbering the hardware teams settle on. Fixes: d3f3baa3562a ("drm/i915: Reinstate the mmap ioctl for some platforms") Cc: Thomas Hellström <[email protected]> Cc: Lucas De Marchi <[email protected]> Signed-off-by: Matt Roper <[email protected]> Reviewed-by: Lucas De Marchi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 8e7e5c077cd57ee9a36d58c65f07257dc49a88d5) Signed-off-by: Joonas Lahtinen <[email protected]>
2022-04-10io_uring: flag the fact that linked file assignment is saneJens Axboe2-1/+3
Give applications a way to tell if the kernel supports sane linked files, as in files being assigned at the right time to be able to reliably do <open file direct into slot X><read file from slot X> while using IOSQE_IO_LINK to order them. Not really a bug fix, but flag it as such so that it gets pulled in with backports of the deferred file assignment. Fixes: 6bf9c47a3989 ("io_uring: defer file assignment") Signed-off-by: Jens Axboe <[email protected]>
2022-04-10Linux 5.18-rc2Linus Torvalds1-1/+1
2022-04-10Merge tag 'tty-5.18-rc2' of ↵Linus Torvalds1-10/+10
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull serial driver fix from Greg KH: "This is a single serial driver fix for a build issue that showed up due to changes that came in through the tty tree in 5.18-rc1 that were missed previously. It resolves a build error with the mpc52xx_uart driver. It has been in linux-next this week with no reported problems" * tag 'tty-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: tty: serial: mpc52xx_uart: make rx/tx hooks return unsigned, part II.
2022-04-10Merge tag 'staging-5.18-rc2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fix from Greg KH: "Here is a single staging driver fix for 5.18-rc2 that resolves an endian issue for the r8188eu driver. It has been in linux-next all this week with no reported problems" * tag 'staging-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: r8188eu: Fix PPPoE tag insertion on little endian systems
2022-04-10Merge tag 'driver-core-5.18-rc2' of ↵Linus Torvalds4-48/+4
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg KH: "Here are two small driver core changes for 5.18-rc2. They are the final bits in the removal of the default_attrs field in struct kobj_type. I had to wait until after 5.18-rc1 for all of the changes to do this came in through different development trees, and then one new user snuck in. So this series has two changes: - removal of the default_attrs field in the powerpc/pseries/vas code. The change has been acked by the PPC maintainers to come through this tree - removal of default_attrs from struct kobj_type now that all in-kernel users are removed. This cleans up the kobject code a little bit and removes some duplicated functionality that confused people (now there is only one way to do default groups) Both of these have been in linux-next for all of this week with no reported problems" * tag 'driver-core-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: kobject: kobj_type: remove default_attrs powerpc/pseries/vas: use default_groups in kobj_type
2022-04-10Merge tag 'char-misc-5.18-rc2' of ↵Linus Torvalds1-8/+8
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fix from Greg KH: "A single driver fix. It resolves the build warning issue on 32bit systems in the habannalabs driver that came in during the 5.18-rc1 merge cycle. It has been in linux-next for all this week with no reported problems" * tag 'char-misc-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: habanalabs: Fix test build failures
2022-04-10Merge tag 'powerpc-5.18-2' of ↵Linus Torvalds15-35/+169
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix KVM "lost kick" race, where an attempt to pull a vcpu out of the guest could be lost (or delayed until the next guest exit). - Disable SCV (system call vectored) when PR KVM guests could be run. - Fix KVM PR guests using SCV, by disallowing AIL != 0 for KVM PR guests. - Add a new KVM CAP to indicate if AIL == 3 is supported. - Fix a regression when hotplugging a CPU to a memoryless/cpuless node. - Make virt_addr_valid() stricter for 64-bit Book3E & 32-bit, which fixes crashes seen due to hardened usercopy. - Revert a change to max_mapnr which broke HIGHMEM. Thanks to Christophe Leroy, Fabiano Rosas, Kefeng Wang, Nicholas Piggin, and Srikar Dronamraju. * tag 'powerpc-5.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: Revert "powerpc: Set max_mapnr correctly" powerpc: Fix virt_addr_valid() for 64-bit Book3E & 32-bit KVM: PPC: Move kvmhv_on_pseries() into kvm_ppc.h powerpc/numa: Handle partially initialized numa nodes powerpc/64: Fix build failure with allyesconfig in book3s_64_entry.S KVM: PPC: Use KVM_CAP_PPC_AIL_MODE_3 KVM: PPC: Book3S PR: Disallow AIL != 0 KVM: PPC: Book3S PR: Disable SCV when AIL could be disabled KVM: PPC: Book3S HV P9: Fix "lost kick" race
2022-04-10Merge tag 'irq-urgent-2022-04-10' of ↵Linus Torvalds5-14/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Thomas Gleixner: "A set of interrupt chip driver fixes: - A fix for a long standing bug in the ARM GICv3 redistributor polling which uses the wrong bit number to test. - Prevent translation of bogus ACPI table entries which map device interrupts into the IPI space on ARM GICs. - Don't write into the pending register of ARM GICV4 before the scan in hardware has completed. - A set of build and correctness fixes for the Qualcomm MPM driver" * tag 'irq-urgent-2022-04-10' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/gic, gic-v3: Prevent GSI to SGI translations irqchip/gic-v3: Fix GICR_CTLR.RWP polling irqchip/gic-v4: Wait for GICR_VPENDBASER.Dirty to clear before descheduling irqchip/irq-qcom-mpm: fix return value check in qcom_mpm_init() irq/qcom-mpm: Fix build error without MAILBOX
2022-04-10Merge tag 'x86_urgent_for_v5.18_rc2' of ↵Linus Torvalds6-57/+54
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Fix the MSI message data struct definition - Use local labels in the exception table macros to avoid symbol conflicts with clang LTO builds - A couple of fixes to objtool checking of the relatively newly added SLS and IBT code - Rename a local var in the WARN* macro machinery to prevent shadowing * tag 'x86_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/msi: Fix msi message data shadow struct x86/extable: Prefer local labels in .set directives x86,bpf: Avoid IBT objtool warning objtool: Fix SLS validation for kcov tail-call replacement objtool: Fix IBT tail-call detection x86/bug: Prevent shadowing in __WARN_FLAGS x86/mm/tlb: Revert retpoline avoidance approach
2022-04-10Merge tag 'perf_urgent_for_v5.18_rc2' of ↵Linus Torvalds7-169/+101
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Borislav Petkov: - A couple of fixes to cgroup-related handling of perf events - A couple of fixes to event encoding on Sapphire Rapids - Pass event caps of inherited events so that perf doesn't fail wrongly at fork() - Add support for a new Raptor Lake CPU * tag 'perf_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Always set cpuctx cgrp when enable cgroup event perf/core: Fix perf_cgroup_switch() perf/core: Use perf_cgroup_info->active to check if cgroup is active perf/core: Don't pass task around when ctx sched in perf/x86/intel: Update the FRONTEND MSR mask on Sapphire Rapids perf/x86/intel: Don't extend the pseudo-encoding to GP counters perf/core: Inherit event_caps perf/x86/uncore: Add Raptor Lake uncore support perf/x86/msr: Add Raptor Lake CPU support perf/x86/cstate: Add Raptor Lake support perf/x86: Add Intel Raptor Lake support
2022-04-10Merge tag 'locking_urgent_for_v5.18_rc2' of ↵Linus Torvalds10-572/+585
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Borislav Petkov: - Allow the compiler to optimize away unused percpu accesses and change the local_lock_* macros back to inline functions - A couple of fixes to static call insn patching * tag 'locking_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Revert "mm/page_alloc: mark pagesets as __maybe_unused" Revert "locking/local_lock: Make the empty local_lock_*() function a macro." x86/percpu: Remove volatile from arch_raw_cpu_ptr(). static_call: Remove __DEFINE_STATIC_CALL macro static_call: Properly initialise DEFINE_STATIC_CALL_RET0() static_call: Don't make __static_call_return0 static x86,static_call: Fix __static_call_return0 for i386
2022-04-10Merge tag 'sched_urgent_for_v5.18_rc2' of ↵Linus Torvalds4-13/+12
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Borislav Petkov: - Use the correct static key checking primitive on the IRQ exit path - Two fixes for the new forceidle balancer * tag 'sched_urgent_for_v5.18_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: entry: Fix compile error in dynamic_irqentry_exit_cond_resched() sched: Teach the forced-newidle balancer about CPU affinity limitation. sched/core: Fix forceidle balancing
2022-04-10s390: update defconfigsHeiko Carstens3-7/+12
Signed-off-by: Heiko Carstens <[email protected]>
2022-04-10ath9k: Fix usage of driver-private space in tx_infoToke Høiland-Jørgensen2-11/+21
The ieee80211_tx_info_clear_status() helper also clears the rate counts and the driver-private part of struct ieee80211_tx_info, so using it breaks quite a few other things. So back out of using it, and instead define a ath-internal helper that only clears the area between the status_driver_data and the rates info. Combined with moving the ath_frame_info struct to status_driver_data, this avoids clearing anything we shouldn't be, and so we can keep the existing code for handling the rate information. While fixing this I also noticed that the setting of tx_info->status.rates[tx_rateindex].count on hardware underrun errors was always immediately overridden by the normal setting of the same fields, so rearrange the code so that the underrun detection actually takes effect. The new helper could be generalised to a 'memset_between()' helper, but leave it as a driver-internal helper for now since this needs to go to stable. Cc: [email protected] Reported-by: Peter Seiderer <[email protected]> Fixes: 037250f0a45c ("ath9k: Properly clear TX status area before reporting to mac80211") Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Reviewed-by: Peter Seiderer <[email protected]> Tested-by: Peter Seiderer <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-10brcmfmac: sdio: Fix undefined behavior due to shift overflowing the constantBorislav Petkov1-1/+1
Fix: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c: In function ‘brcmf_sdio_drivestrengthinit’: drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3798:2: error: case label does not reduce to an integer constant case SDIOD_DRVSTR_KEY(BRCM_CC_43143_CHIP_ID, 17): ^~~~ drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c:3809:2: error: case label does not reduce to an integer constant case SDIOD_DRVSTR_KEY(BRCM_CC_43362_CHIP_ID, 13): ^~~~ See https://lore.kernel.org/r/YkwQ6%[email protected] for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <[email protected]> Cc: Arend van Spriel <[email protected]> Cc: Franky Lin <[email protected]> Cc: Hante Meuleman <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Acked-by: Arend van Spriel <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-10mt76: Fix undefined behavior due to shift overflowing the constantBorislav Petkov1-1/+1
Fix: drivers/net/wireless/mediatek/mt76/mt76x2/pci.c: In function ‘mt76x2e_probe’: ././include/linux/compiler_types.h:352:38: error: call to ‘__compiletime_assert_946’ \ declared with attribute error: FIELD_PREP: mask is not constant _compiletime_assert(condition, msg, __compiletime_assert_, __COUNTER__) See https://lore.kernel.org/r/YkwQ6%[email protected] for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <[email protected]> Cc: Felix Fietkau <[email protected]> Cc: Lorenzo Bianconi <[email protected]> Cc: Ryder Lee <[email protected]> Cc: Shayne Chen <[email protected]> Cc: Sean Wang <[email protected]> Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-10tick/sched: Fix non-kernel-doc commentJiapeng Chong1-2/+2
Fixes the following W=1 kernel build warning: kernel/time/tick-sched.c:1563: warning: This comment starts with '/**', but isn't a kernel-doc comment. Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-10tick/nohz: Use WARN_ON_ONCE() to prevent console saturationPaul Gortmaker1-1/+1
While running some testing on code that happened to allow the variable tick_nohz_full_running to get set but with no "possible" NOHZ cores to back up that setting, this warning triggered: if (unlikely(tick_do_timer_cpu == TICK_DO_TIMER_NONE)) WARN_ON(tick_nohz_full_running); The console was overwhemled with an endless stream of one WARN per tick per core and there was no way to even see what was going on w/o using a serial console to capture it and then trace it back to this. Change it to WARN_ON_ONCE(). Fixes: 08ae95f4fd3b ("nohz_full: Allow the boot CPU to be nohz_full") Signed-off-by: Paul Gortmaker <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2022-04-09Merge tag 'perf-tools-fixes-for-v5.18-2022-04-09' of ↵Linus Torvalds26-71/+234
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix the clang command line option probing and remove some options to filter out, fixing the build with the latest clang versions - Fix 'perf bench' futex and epoll benchmarks to deal with machines with more than 1K CPUs - Fix 'perf test tsc' error message when not supported - Remap perf ring buffer if there is no space for event, fixing perf usage in 32-bit ChromeOS - Drop objdump stderr to avoid getting stuck waiting for stdout output in 'perf annotate' - Fix up garbled output by now showing unwind error messages when augmenting frame in best effort mode - Fix perf's libperf_print callback, use the va_args eprintf() variant - Sync vhost and arm64 cputype headers with the kernel sources - Fix 'perf report --mem-mode' with ARM SPE - Add missing external commands ('iiostat', etc) to 'perf --list-cmds' * tag 'perf-tools-fixes-for-v5.18-2022-04-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout output perf tools: Add external commands to list-cmds perf docs: Add perf-iostat link to manpages perf session: Remap buf if there is no space for event perf bench: Fix epoll bench to correct usage of affinity for machines with #CPUs > 1K perf bench: Fix futex bench to correct usage of affinity for machines with #CPUs > 1K perf tools: Fix perf's libperf_print callback perf: arm-spe: Fix perf report --mem-mode perf unwind: Don't show unwind error messages when augmenting frame pointer stack tools headers arm64: Sync arm64's cputype.h with the kernel sources perf test tsc: Fix error message when not supported perf build: Don't use -ffat-lto-objects in the python feature test when building with clang-13 perf python: Fix probing for some clang command line options tools build: Filter out options and warnings not supported by clang tools build: Use $(shell ) instead of `` to get embedded libperl's ccopts tools include UAPI: Sync linux/vhost.h with the kernel sources
2022-04-09Merge tag 'cxl+nvdimm-for-5.18-rc2' of ↵Linus Torvalds2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull cxl and nvdimm fixes from Dan Williams: - Fix a compile error in the nvdimm unit tests - Fix a shadowed variable warning in the CXL PCI driver * tag 'cxl+nvdimm-for-5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: cxl/pci: Drop shadowed variable tools/testing/nvdimm: Fix security_init() symbol collision
2022-04-09Merge tag 'gpio-fixes-for-v5.18-rc2' of ↵Linus Torvalds2-0/+28
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull gpio fix from Bartosz Golaszewski: - fix a race condition with consumers accessing the fields of GPIO IRQ chips before they're fully initialized * tag 'gpio-fixes-for-v5.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: gpio: Restrict usage of GPIO chip irq members before initialization
2022-04-09Merge tag 'irqchip-fixes-5.18-1' of ↵Thomas Gleixner5-14/+37
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent Pull irqchip fixes from Marc Zyngier: - Fix GICv3 polling for RWP in redistributors - Reject ACPI attempts to use SGIs on GIC/GICv3 - Fix unpredictible behaviour when making a VPE non-resident with GICv4 - A couple of fixes for the newly merged qcom-mpm driver Link: https://lore.kernel.org/lkml/[email protected]
2022-04-09timers: Fix warning condition in __run_timers()Anna-Maria Behnsen1-4/+7
When the timer base is empty, base::next_expiry is set to base::clk + NEXT_TIMER_MAX_DELTA and base::next_expiry_recalc is false. When no timer is queued until jiffies reaches base::next_expiry value, the warning for not finding any expired timer and base::next_expiry_recalc is false in __run_timers() triggers. To prevent triggering the warning in this valid scenario base::timers_pending needs to be added to the warning condition. Fixes: 31cd0e119d50 ("timers: Recalculate next timer interrupt only when necessary") Reported-by: Johannes Berg <[email protected]> Signed-off-by: Anna-Maria Behnsen <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Frederic Weisbecker <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-09perf annotate: Drop objdump stderr to avoid getting stuck waiting for stdout ↵Ian Rogers1-0/+1
output If objdump writes to stderr it can block waiting for it to be read. As perf doesn't read stderr then progress stops with perf waiting for stdout output. Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexandre Truong <[email protected]> Cc: Dave Marchevsky <[email protected]> Cc: Denis Nikitin <[email protected]> Cc: German Gomez <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: John Garry <[email protected]> Cc: Leo Yan <[email protected]> Cc: Lexi Shao <[email protected]> Cc: Li Huafei <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Martin Liška <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Poirier <[email protected]> Cc: Michael Petlan <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Remi Bernon <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: Song Liu <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Richter <[email protected]> Cc: Will Deacon <[email protected]> Cc: William Cohen <[email protected]> Cc: [email protected] Link: http://lore.kernel.org/lkml/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf tools: Add external commands to list-cmdsMichael Petlan1-0/+4
The `perf --list-cmds` output prints only internal commands, although there is no reason for that from users' perspective. Adding the external commands to commands array with NULL function pointer allows printing all perf commands while not changing the logic of command handler selection. Signed-off-by: Michael Petlan <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf docs: Add perf-iostat link to manpagesMichael Petlan1-1/+1
Signed-off-by: Michael Petlan <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09perf session: Remap buf if there is no space for eventDenis Nikitin1-3/+12
If a perf event doesn't fit into remaining buffer space return NULL to remap buf and fetch the event again. Keep the logic to error out on inadequate input from fuzzing. This fixes perf failing on ChromeOS (with 32b userspace): $ perf report -v -i perf.data ... prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data? Error: failed to process sample Fixes: 57fc032ad643ffd0 ("perf session: Avoid infinite loop when seeing invalid header.size") Reviewed-by: James Clark <[email protected]> Signed-off-by: Denis Nikitin <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Budankov <[email protected]> Cc: Namhyung Kim <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-09Merge tag 'scsi-fixes' of ↵Linus Torvalds42-826/+467
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: - add support for new devices (ufs, mvsas) - a major set of fixes in lpfc - get rid of a driver specific ioctl in pcmraid - a major rework of aha152x to get rid of the scsi_pointer. - minor fixes and obvious changes including several spelling updates. * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (36 commits) scsi: megaraid_sas: Target with invalid LUN ID is deleted during scan scsi: ufs: ufshpb: Fix a NULL check on list iterator scsi: sd: Clean up gendisk if device_add_disk() failed scsi: message: fusion: Remove redundant variable dmp scsi: mvsas: Add PCI ID of RocketRaid 2640 scsi: sd: sd_read_cpr() requires VPD pages scsi: mpt3sas: Fail reset operation if config request timed out scsi: sym53c500_cs: Stop using struct scsi_pointer scsi: ufs: ufs-pci: Add support for Intel MTL scsi: mpt3sas: Fix mpt3sas_check_same_4gb_region() kdoc comment scsi: scsi_debug: Fix sdebug_blk_mq_poll() in_use_bm bitmap use scsi: bnx2i: Fix spelling mistake "mis-match" -> "mismatch" scsi: bnx2fc: Fix spelling mistake "mis-match" -> "mismatch" scsi: zorro7xx: Fix a resource leak in zorro7xx_remove_one() scsi: aic7xxx: Use standard PCI subsystem, subdevice defines scsi: ufs: qcom: Drop custom Android boot parameters scsi: core: sysfs: Remove comments that conflict with the actual logic scsi: hisi_sas: Remove stray fallthrough annotation scsi: virtio-scsi: Eliminate anonymous module_init & module_exit scsi: isci: Fix spelling mistake "doesnt" -> "doesn't" ...
2022-04-09media: si2157: unknown chip version Si2147-A30 ROM 0x50Piotr Chmura1-11/+11
Fix firmware file names assignment in si2157 tuner, allow for running devices without firmware files needed. modprobe gives error: unknown chip version Si2147-A30 ROM 0x50 Device initialization is interrupted. Caused by: 1. table si2157_tuners has swapped fields rom_id and required vs struct si2157_tuner_info. 2. both firmware file names can be null for devices with required == false - device uses build-in firmware in this case Tested on this device: m07ca:1871 AVerMedia Technologies, Inc. TD310 DVB-T/T2/C dongle [mchehab: fix mangled patch] Link: https://bugzilla.kernel.org/show_bug.cgi?id=215726 Link: https://lore.kernel.org/lkml/[email protected]/ Link: https://lore.kernel.org/linux-media/[email protected] Fixes: 1c35ba3bf972 ("media: si2157: use a different namespace for firmware") Cc: [email protected] # 5.17.x Signed-off-by: Piotr Chmura <[email protected]> Tested-by: Robert Schlabbach <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.