aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2021-09-28scsi: ses: Fix unsigned comparison with less than zeroJiapeng Chong1-1/+1
Fix the following coccicheck warning: ./drivers/scsi/ses.c:137:10-16: WARNING: Unsigned expression compared with zero: result > 0. Link: https://lore.kernel.org/r/1632477113-90378-1-git-send-email-jiapeng.chong@linux.alibaba.com Reported-by: Abaci Robot <[email protected]> Signed-off-by: Jiapeng Chong <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-09-28scsi: ufs: Fix illegal offset in UPIU event traceJonathan Hsu1-2/+1
Fix incorrect index for UTMRD reference in ufshcd_add_tm_upiu_trace(). Link: https://lore.kernel.org/r/[email protected] Fixes: 4b42d557a8ad ("scsi: ufs: core: Fix wrong Task Tag used in task management request UPIUs") Cc: [email protected] Reviewed-by: Stanley Chu <[email protected]> Reviewed-by: Bart Van Assche <[email protected]> Signed-off-by: Jonathan Hsu <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2021-09-28ksmbd: fix documentation for 2 functionsEnzo Matsumiya1-2/+2
ksmbd_kthread_fn() and create_socket() returns 0 or error code, and not task_struct/ERR_PTR. Signed-off-by: Enzo Matsumiya <[email protected]> Acked-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-09-28net: bridge: mcast: Associate the seqcount with its protecting lock.Thomas Gleixner2-5/+3
The sequence count bridge_mcast_querier::seq is protected by net_bridge::multicast_lock but seqcount_init() does not associate the seqcount with the lock. This leads to a warning on PREEMPT_RT because preemption is still enabled. Let seqcount_init() associate the seqcount with lock that protects the write section. Remove lockdep_assert_held_once() because lockdep already checks whether the associated lock is held. Fixes: 67b746f94ff39 ("net: bridge: mcast: make sure querier port/address updates are consistent") Reported-by: Mike Galbraith <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Tested-by: Mike Galbraith <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-09-28net: mdio-ipq4019: Fix the error for an optional regs resourceCai Huoqing1-1/+5
The second resource is optional which is only provided on the chipset IPQ5018. But the blamed commit ignores that and if the resource is not there it just fails. the resource is used like this, if (priv->eth_ldo_rdy) { val = readl(priv->eth_ldo_rdy); val |= BIT(0); writel(val, priv->eth_ldo_rdy); fsleep(IPQ_PHY_SET_DELAY_US); } This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: fa14d03e014a ("net: mdio-ipq4019: Make use of devm_platform_ioremap_resource()") Signed-off-by: Cai Huoqing <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2021-09-28Merge tag 'pinctrl-v5.15-2' of ↵Linus Torvalds8-9/+150
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pin control fixes from Linus Walleij: "Some few pin control fixes for the v5.15 kernel cycle. The most critical is the AMD fixes. - Fix wakeup interrupts in the AMD driver affecting AMD laptops. - Fix parent irqspec translation in the Qualcomm SPMI GPIO driver. - Fix deferred probe handling in the Rockchip driver, this is a stopgap solution while we look for something more elegant. - Add PM suspend callbacks to the Qualcomm SC7280 driver. - Some minor doc fix (should have come in earlier, sorry)" * tag 'pinctrl-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl: qcom: sc7280: Add PM suspend callbacks gpio/rockchip: fetch deferred output settings on probe pinctrl/rockchip: add a queue for deferred pin output settings on probe pinctrl: qcom: spmi-gpio: correct parent irqspec translation pinctrl: amd: Handle wake-up interrupt pinctrl: amd: Add irq field data pinctrl: core: Remove duplicated word from devm_pinctrl_unregister()
2021-09-28Merge tag 'vfio-v5.15-rc4' of git://github.com/awilliam/linux-vfioLinus Torvalds2-2/+4
Pull VFIO fixes from Alex Williamson: - Fix vfio-ap leak on uninit (Jason Gunthorpe) - Add missing prototype arg name (Colin Ian King) * tag 'vfio-v5.15-rc4' of git://github.com/awilliam/linux-vfio: vfio/ap_ops: Add missed vfio_uninit_group_dev() vfio/pci: add missing identifier name in argument of function prototype
2021-09-28Merge tag 'm68k-for-v5.15-tag3' of ↵Linus Torvalds24-354/+301
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull more m68k updates from Geert Uytterhoeven: - signal handling fixes - removal of set_fs() [ The set_fs removal isn't strictly a fix, but it's been pending for a while and is very welcome. The signal handling fixes resolved an issue that was incorrectly attributed to the set_fs changes - Linus ] * tag 'm68k-for-v5.15-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: Remove set_fs() m68k: Provide __{get,put}_kernel_nofault m68k: Factor the 8-byte lowlevel {get,put}_user code into helpers m68k: Use BUILD_BUG for passing invalid sizes to get_user/put_user m68k: Remove the 030 case in virt_to_phys_slow m68k: Document that access_ok is broken for !CONFIG_CPU_HAS_ADDRESS_SPACES m68k: Leave stack mangling to asm wrapper of sigreturn() m68k: Update ->thread.esp0 before calling syscall_trace() in ret_from_signal m68k: Handle arrivals of multiple signals correctly
2021-09-28Merge tag 'nios2_fixes_for_v5.15_part1' of ↵Linus Torvalds2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux Pull nios2 fixes from Dinh Nguyen: - Fix build warning for unmet dependency for EARLY_PRINTK - Remove unused dram_start() function * tag 'nios2_fixes_for_v5.15_part1' of git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux: NIOS2: setup.c: drop unused variable 'dram_start' NIOS2: fix kconfig unmet dependency warning for SERIAL_CORE_CONSOLE
2021-09-28drm/amdgpu: force exit gfxoff on sdma resume for rmb s0ixPrike Liang1-0/+8
In the s2idle stress test sdma resume fail occasionally,in the failed case GPU is in the gfxoff state.This issue may introduce by firmware miss handle doorbell S/R and now temporary fix the issue by forcing exit gfxoff for sdma resume. Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-09-28drm/amdgpu: check tiling flags when creating FB on GFX8-Simon Ser1-0/+31
On GFX9+, format modifiers are always enabled and ensure the frame-buffers can be scanned out at ADDFB2 time. On GFX8-, format modifiers are not supported and no other check is performed. This means ADDFB2 IOCTLs will succeed even if the tiling isn't supported for scan-out, and will result in garbage displayed on screen [1]. Fix this by adding a check for tiling flags for GFX8 and older. The check is taken from radeonsi in Mesa (see how is_displayable is populated in gfx6_compute_surface). Changes in v2: use drm_WARN_ONCE instead of drm_WARN (Michel) [1]: https://github.com/swaywm/wlroots/issues/3185 Signed-off-by: Simon Ser <[email protected]> Acked-by: Michel Dänzer <[email protected]> Cc: Alex Deucher <[email protected]> Cc: Harry Wentland <[email protected]> Cc: Nicholas Kazlauskas <[email protected]> Cc: Bas Nieuwenhuizen <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-09-28drm/amd/display: Pass PCI deviceid into DCCharlene Liu1-0/+1
[why] pci deviceid not passed to dal dc, without proper break, dcn2.x falls into dcn3.x code path [how] pass in pci deviceid, and break once dal_version initialized. Reviewed-by: Zhan Liu <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-09-28drm/amd/display: initialize backlight_ramping_override to falseJosip Pavic1-0/+1
[Why] Stack variable params.backlight_ramping_override is uninitialized, so it contains junk data [How] Initialize the variable to false Reviewed-by: Roman Li <[email protected]> Acked-by: Anson Jacob <[email protected]> Signed-off-by: Josip Pavic <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-09-28drm/amdgpu: correct initial cp_hqd_quantum for gfx9Hawking Zhang1-1/+1
didn't read the value of mmCP_HQD_QUANTUM from correct register offset Signed-off-by: Hawking Zhang <[email protected]> Reviewed-by: Le Ma <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-09-28drm/amd/display: Fix Display Flicker on embedded panelsPraful Swarnakar1-8/+7
[Why] ASSR is dependent on Signed PSP Verstage to enable Content Protection for eDP panels. Unsigned PSP verstage is used during development phase causing ASSR to FAIL. As a result, link training is performed with DP_PANEL_MODE_DEFAULT instead of DP_PANEL_MODE_EDP for eDP panels that causes display flicker on some panels. [How] - Do not change panel mode, if ASSR is disabled - Just report and continue to perform eDP link training with right settings further. Signed-off-by: Praful Swarnakar <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2021-09-28drm/amdgpu: fix gart.bo pin_count leakLeslie Shi2-2/+4
gmc_v{9,10}_0_gart_disable() isn't called matched with correspoding gart_enbale function in SRIOV case. This will lead to gart.bo pin_count leak on driver unload. Cc: Hawking Zhang <[email protected]> Signed-off-by: Leslie Shi <[email protected]> Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2021-09-28kernfs: also call kernfs_set_rev() for positive dentryHou Tao1-2/+7
A KMSAN warning is reported by Alexander Potapenko: BUG: KMSAN: uninit-value in kernfs_dop_revalidate+0x61f/0x840 fs/kernfs/dir.c:1053 kernfs_dop_revalidate+0x61f/0x840 fs/kernfs/dir.c:1053 d_revalidate fs/namei.c:854 lookup_dcache fs/namei.c:1522 __lookup_hash+0x3a6/0x590 fs/namei.c:1543 filename_create+0x312/0x7c0 fs/namei.c:3657 do_mkdirat+0x103/0x930 fs/namei.c:3900 __do_sys_mkdir fs/namei.c:3931 __se_sys_mkdir fs/namei.c:3929 __x64_sys_mkdir+0xda/0x120 fs/namei.c:3929 do_syscall_x64 arch/x86/entry/common.c:51 It seems a positive dentry in kernfs becomes a negative dentry directly through d_delete() in vfs_rmdir(). dentry->d_time is uninitialized when accessing it in kernfs_dop_revalidate(), because it is only initialized when created as negative dentry in kernfs_iop_lookup(). The problem can be reproduced by the following command: cd /sys/fs/cgroup/pids && mkdir hi && stat hi && rmdir hi && stat hi A simple fixes seems to be initializing d->d_time for positive dentry in kernfs_iop_lookup() as well. The downside is the negative dentry will be revalidated again after it becomes negative in d_delete(), because the revison of its parent must have been increased due to its removal. Alternative solution is implement .d_iput for kernfs, and assign d_time for the newly-generated negative dentry in it. But we may need to take kernfs_rwsem to protect again the concurrent kernfs_link_sibling() on the parent directory, it is a little over-killing. Now the simple fix is chosen. Link: https://marc.info/?l=linux-fsdevel&m=163249838610499 Fixes: c7e7c04274b1 ("kernfs: use VFS negative dentry caching") Reported-by: Alexander Potapenko <[email protected]> Signed-off-by: Hou Tao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-09-28selftests: KVM: Don't clobber XMM register when readOliver Upton1-1/+1
There is no need to clobber a register that is only being read from. Oops. Drop the XMM register from the clobbers list. Signed-off-by: Oliver Upton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2021-09-28Merge tag 'fsverity-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt Pull fsverity fix from Eric Biggers: "Fix an integer overflow when computing the Merkle tree layout of extremely large files, exposed by btrfs adding support for fs-verity" * tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt: fs-verity: fix signed integer overflow with i_size near S64_MAX
2021-09-28Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds4-7/+17
Pull virtio/vdpa fixes from Michael Tsirkin: "Fixes up some issues in rc1" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa: potential uninitialized return in vhost_vdpa_va_map() vdpa/mlx5: Avoid executing set_vq_ready() if device is reset vdpa/mlx5: Clear ready indication for control VQ vduse: Cleanup the old kernel states after reset failure vduse: missing error code in vduse_init() virtio: don't fail on !of_device_is_compatible
2021-09-28Merge tag 'mmc-v5.15-2' of ↵Linus Torvalds2-3/+14
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - renesas_sdhi: Fix regression with hard reset on old SDHIs - dw_mmc: Only inject fault before done/error * tag 'mmc-v5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: renesas_sdhi: fix regression with hard reset on old SDHIs mmc: dw_mmc: Only inject fault before done/error
2021-09-28Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfDavid S. Miller11-53/+139
Daniel Borkmann says: ==================== pull-request: bpf 2021-09-28 The following pull-request contains BPF updates for your *net* tree. We've added 10 non-merge commits during the last 14 day(s) which contain a total of 11 files changed, 139 insertions(+), 53 deletions(-). The main changes are: 1) Fix MIPS JIT jump code emission for too large offsets, from Piotr Krysiuk. 2) Fix x86 JIT atomic/fetch emission when dst reg maps to rax, from Johan Almbladh. 3) Fix cgroup_sk_alloc corner case when called from interrupt, from Daniel Borkmann. 4) Fix segfault in libbpf's linker for objects without BTF, from Kumar Kartikeya Dwivedi. 5) Fix bpf_jit_charge_modmem for applications with CAP_BPF, from Lorenz Bauer. 6) Fix return value handling for struct_ops BPF programs, from Hou Tao. 7) Various fixes to BPF selftests, from Jiri Benc. ==================== Signed-off-by: David S. Miller <[email protected]> ,
2021-09-28Revert "block, bfq: honor already-setup queue merges"Jens Axboe1-13/+3
This reverts commit 2d52c58b9c9bdae0ca3df6a1eab5745ab3f7d80b. We have had several folks complain that this causes hangs for them, which is especially problematic as the commit has also hit stable already. As no resolution seems to be forthcoming right now, revert the patch. Link: https://bugzilla.kernel.org/show_bug.cgi?id=214503 Fixes: 2d52c58b9c9b ("block, bfq: honor already-setup queue merges") Signed-off-by: Jens Axboe <[email protected]>
2021-09-28net: hns3: fix hclge_dbg_dump_tm_pg() stack usageArnd Bergmann1-4/+24
This function copies strings around between multiple buffers including a large on-stack array that causes a build warning on 32-bit systems: drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c: In function 'hclge_dbg_dump_tm_pg': drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_debugfs.c:782:1: error: the frame size of 1424 bytes is larger than 1400 bytes [-Werror=frame-larger-than=] The function can probably be cleaned up a lot, to go back to printing directly into the output buffer, but dynamically allocating the structure is a simpler workaround for now. Fixes: 04d96139ddb3 ("net: hns3: refine function hclge_dbg_dump_tm_pri()") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-28net: mdio: mscc-miim: Fix the mdio controllerHoratiu Vultur1-5/+10
According to the documentation the second resource is optional. But the blamed commit ignores that and if the resource is not there it just fails. This patch reverts that to still allow the second resource to be optional because other SoC have the some MDIO controller and doesn't need to second resource. Fixes: 672a1c394950 ("net: mdio: mscc-miim: Make use of the helper function devm_platform_ioremap_resource()") Signed-off-by: Horatiu Vultur <[email protected]> Reviewed-by: Cai Huoqing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-28af_unix: Return errno instead of NULL in unix_create1().Kuniyuki Iwashima1-17/+32
unix_create1() returns NULL on error, and the callers assume that it never fails for reasons other than out of memory. So, the callers always return -ENOMEM when unix_create1() fails. However, it also returns NULL when the number of af_unix sockets exceeds twice the limit controlled by sysctl: fs.file-max. In this case, the callers should return -ENFILE like alloc_empty_file(). This patch changes unix_create1() to return the correct error value instead of NULL on error. Out of curiosity, the assumption has been wrong since 1999 due to this change introduced in 2.2.4 [0]. diff -u --recursive --new-file v2.2.3/linux/net/unix/af_unix.c linux/net/unix/af_unix.c --- v2.2.3/linux/net/unix/af_unix.c Tue Jan 19 11:32:53 1999 +++ linux/net/unix/af_unix.c Sun Mar 21 07:22:00 1999 @@ -388,6 +413,9 @@ { struct sock *sk; + if (atomic_read(&unix_nr_socks) >= 2*max_files) + return NULL; + MOD_INC_USE_COUNT; sk = sk_alloc(PF_UNIX, GFP_KERNEL, 1); if (!sk) { [0]: https://cdn.kernel.org/pub/linux/kernel/v2.2/patch-2.2.4.gz Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Kuniyuki Iwashima <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-28net: udp: annotate data race around udp_sk(sk)->corkflagEric Dumazet2-6/+6
up->corkflag field can be read or written without any lock. Annotate accesses to avoid possible syzbot/KCSAN reports. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-28net: sun: SUNVNET_COMMON should depend on INETRandy Dunlap1-0/+1
When CONFIG_INET is not set, there are failing references to IPv4 functions, so make this driver depend on INET. Fixes these build errors: sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_start_xmit_common': sunvnet_common.c:(.text+0x1a68): undefined reference to `__icmp_send' sparc64-linux-ld: drivers/net/ethernet/sun/sunvnet_common.o: in function `sunvnet_poll_common': sunvnet_common.c:(.text+0x358c): undefined reference to `ip_send_check' Signed-off-by: Randy Dunlap <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Aaron Young <[email protected]> Cc: Rashmi Narasimhan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-28ionic: fix gathering of debug statsShannon Nelson1-9/+0
Don't print stats for which we haven't reserved space as it can cause nasty memory bashing and related bad behaviors. Fixes: aa620993b1e5 ("ionic: pull per-q stats work out of queue loops") Signed-off-by: Shannon Nelson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-28Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tDavid S. Miller1-7/+15
nguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-09-27 This series contains updates to e100 driver only. Jake corrects under allocation of register buffer due to incorrect calculations and fixes buffer overrun of register dump. ==================== Signed-off-by: David S. Miller <[email protected]>
2021-09-28dmascc: add CONFIG_VIRT_TO_BUS dependencyArnd Bergmann1-0/+1
Many architectures don't define virt_to_bus() any more, as drivers should be using the dma-mapping interfaces where possible: In file included from drivers/net/hamradio/dmascc.c:27: drivers/net/hamradio/dmascc.c: In function 'tx_on': drivers/net/hamradio/dmascc.c:976:30: error: implicit declaration of function 'virt_to_bus'; did you mean 'virt_to_fix'? [-Werror=implicit-function-declaration] 976 | virt_to_bus(priv->tx_buf[priv->tx_tail]) + n); | ^~~~~~~~~~~ arch/arm/include/asm/dma.h:109:52: note: in definition of macro 'set_dma_addr' 109 | __set_dma_addr(chan, (void *)__bus_to_virt(addr)) | ^~~~ Add the Kconfig dependency to prevent this from being built on architectures without virt_to_bus(). Fixes: bc1abb9e55ce ("dmascc: use proper 'virt_to_bus()' rather than casting to 'int'") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-28net: ks8851: fix link errorArnd Bergmann2-4/+10
An object file cannot be built for both loadable module and built-in use at the same time: arm-linux-gnueabi-ld: drivers/net/ethernet/micrel/ks8851_common.o: in function `ks8851_probe_common': ks8851_common.c:(.text+0xf80): undefined reference to `__this_module' Change the ks8851_common code to be a standalone module instead, and use Makefile logic to ensure this is built-in if at least one of its two users is. Fixes: 797047f875b5 ("net: ks8851: Implement Parallel bus operations") Link: https://lore.kernel.org/netdev/[email protected]/ Reviewed-by: Andrew Lunn <[email protected]> Acked-by: Marek Vasut <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2021-09-28bpf, x86: Fix bpf mapping of atomic fetch implementationJohan Almbladh1-5/+8
Fix the case where the dst register maps to %rax as otherwise this produces an incorrect mapping with the implementation in 981f94c3e921 ("bpf: Add bitwise atomic instructions") as %rax is clobbered given it's part of the cmpxchg as operand. The issue is similar to b29dd96b905f ("bpf, x86: Fix BPF_FETCH atomic and/or/ xor with r0 as src") just that the case of dst register was missed. Before, dst=r0 (%rax) src=r2 (%rsi): [...] c5: mov %rax,%r10 c8: mov 0x0(%rax),%rax <---+ (broken) cc: mov %rax,%r11 | cf: and %rsi,%r11 | d2: lock cmpxchg %r11,0x0(%rax) <---+ d8: jne 0x00000000000000c8 | da: mov %rax,%rsi | dd: mov %r10,%rax | [...] | | After, dst=r0 (%rax) src=r2 (%rsi): | | [...] | da: mov %rax,%r10 | dd: mov 0x0(%r10),%rax <---+ (fixed) e1: mov %rax,%r11 | e4: and %rsi,%r11 | e7: lock cmpxchg %r11,0x0(%r10) <---+ ed: jne 0x00000000000000dd ef: mov %rax,%rsi f2: mov %r10,%rax [...] The remaining combinations were fine as-is though: After, dst=r9 (%r15) src=r0 (%rax): [...] dc: mov %rax,%r10 df: mov 0x0(%r15),%rax e3: mov %rax,%r11 e6: and %r10,%r11 e9: lock cmpxchg %r11,0x0(%r15) ef: jne 0x00000000000000df _ f1: mov %rax,%r10 | (unneeded, but f4: mov %r10,%rax _| not a problem) [...] After, dst=r9 (%r15) src=r4 (%rcx): [...] de: mov %rax,%r10 e1: mov 0x0(%r15),%rax e5: mov %rax,%r11 e8: and %rcx,%r11 eb: lock cmpxchg %r11,0x0(%r15) f1: jne 0x00000000000000e1 f3: mov %rax,%rcx f6: mov %r10,%rax [...] The case of dst == src register is rejected by the verifier and therefore not supported, but x86 JIT also handles this case just fine. After, dst=r0 (%rax) src=r0 (%rax): [...] eb: mov %rax,%r10 ee: mov 0x0(%r10),%rax f2: mov %rax,%r11 f5: and %r10,%r11 f8: lock cmpxchg %r11,0x0(%r10) fe: jne 0x00000000000000ee 100: mov %rax,%r10 103: mov %r10,%rax [...] Fixes: 981f94c3e921 ("bpf: Add bitwise atomic instructions") Reported-by: Johan Almbladh <[email protected]> Signed-off-by: Johan Almbladh <[email protected]> Co-developed-by: Daniel Borkmann <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Brendan Jackman <[email protected]> Acked-by: Alexei Starovoitov <[email protected]>
2021-09-28iommu/dart: Clear sid2group entry when a group is freedSven Peter1-3/+35
sid2groups keeps track of which stream id combinations belong to a iommu_group to assign those correctly to devices. When a iommu_group is freed a stale pointer will however remain in sid2groups. This prevents devices with the same stream id combination to ever be attached again (see below). Fix that by creating a shadow copy of the stream id configuration when a group is allocated for the first time and clear the sid2group entry when that group is freed. # echo 1 >/sys/bus/pci/devices/0000\:03\:00.0/remove pci 0000:03:00.0: Removing from iommu group 1 # echo 1 >/sys/bus/pci/rescan [...] pci 0000:03:00.0: BAR 0: assigned [mem 0x6a0000000-0x6a000ffff 64bit pref] pci 0000:03:00.0: BAR 2: assigned [mem 0x6a0010000-0x6a001ffff 64bit pref] pci 0000:03:00.0: BAR 6: assigned [mem 0x6c0100000-0x6c01007ff pref] tg3 0000:03:00.0: Failed to add to iommu group 1: -2 [...] Fixes: 46d1fb072e76b161 ("iommu/dart: Add DART iommu driver") Reported-by: Marc Zyngier <[email protected]> Signed-off-by: Sven Peter <[email protected]> Tested-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2021-09-28iommu/vt-d: Drop "0x" prefix from PCI bus & device addressesBjorn Helgaas1-3/+3
719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault") changed the DMA fault reason from hex to decimal. It also added "0x" prefixes to the PCI bus/device, e.g., - DMAR: [INTR-REMAP] Request device [00:00.5] + DMAR: [INTR-REMAP] Request device [0x00:0x00.5] These no longer match dev_printk() and other similar messages in dmar_match_pci_path() and dmar_acpi_insert_dev_scope(). Drop the "0x" prefixes from the bus and device addresses. Fixes: 719a19335692 ("iommu/vt-d: Tweak the description of a DMA fault") Signed-off-by: Bjorn Helgaas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2021-09-28iommu/dart: Remove iommu_flush_opsSven Peter1-18/+0
apple_dart_tlb_flush_{all,walk} expect to get a struct apple_dart_domain but instead get a struct iommu_domain right now. This breaks those two functions and can lead to kernel panics like the one below. DART can only invalidate the entire TLB and apple_dart_iotlb_sync will already flush everything. There's no need to do that again inside those two functions. Let's just drop them. pci 0000:03:00.0: Removing from iommu group 1 Unable to handle kernel paging request at virtual address 0000000100000023 [...] Call trace: _raw_spin_lock_irqsave+0x54/0xbc apple_dart_hw_stream_command.constprop.0+0x2c/0x130 apple_dart_tlb_flush_all+0x48/0x90 free_io_pgtable_ops+0x40/0x70 apple_dart_domain_free+0x2c/0x44 iommu_group_release+0x68/0xac kobject_cleanup+0x4c/0x1fc kobject_cleanup+0x14c/0x1fc kobject_put+0x64/0x84 iommu_group_remove_device+0x110/0x180 iommu_release_device+0x50/0xa0 [...] Fixes: 46d1fb072e76b161 ("iommu/dart: Add DART iommu driver") Reported-by: Marc Zyngier <[email protected]> Signed-off-by: Sven Peter <[email protected]> Acked-by: Marc Zyngier <[email protected]> Tested-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2021-09-28ALSA: pcsp: Make hrtimer forwarding more robustThomas Gleixner1-1/+1
The hrtimer callback pcsp_do_timer() prepares rearming of the timer with hrtimer_forward(). hrtimer_forward() is intended to provide a mechanism to forward the expiry time of the hrtimer by a multiple of the period argument so that the expiry time greater than the time provided in the 'now' argument. pcsp_do_timer() invokes hrtimer_forward() with the current timer expiry time as 'now' argument. That's providing a periodic timer expiry, but is not really robust when the timer callback is delayed so that the resulting new expiry time is already in the past which causes the callback to be invoked immediately again. If the timer is delayed then the back to back invocation is not really making it better than skipping the missed periods. Sound is distorted in any case. Use hrtimer_forward_now() which ensures that the next expiry is in the future. This prevents hogging the CPU in the timer expiry code and allows later on to remove hrtimer_forward() from the public interfaces. Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: Takashi Iwai <[email protected]> Cc: Jaroslav Kysela <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2021-09-28driver core: Add debug logs when fwnode links are added/deletedSaravana Kannan1-0/+4
This will help with debugging fw_devlink issues. Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-09-28driver core: Create __fwnode_link_del() helper functionSaravana Kannan1-16/+19
The same code is repeated in multiple locations. Create a helper function for it. Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-09-28driver core: Set deferred probe reason when deferred by driver coreSaravana Kannan1-6/+9
When the driver core defers the probe of a device, set the deferred probe reason so that it's easier to debug. The deferred probe reason is available in debugfs under devices_deferred. Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Saravana Kannan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2021-09-28selftests, bpf: test_lwt_ip_encap: Really disable rp_filterJiri Benc1-5/+8
It's not enough to set net.ipv4.conf.all.rp_filter=0, that does not override a greater rp_filter value on the individual interfaces. We also need to set net.ipv4.conf.default.rp_filter=0 before creating the interfaces. That way, they'll also get their own rp_filter value of zero. Fixes: 0fde56e4385b0 ("selftests: bpf: add test_lwt_ip_encap selftest") Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/b1cdd9d469f09ea6e01e9c89a6071c79b7380f89.1632386362.git.jbenc@redhat.com
2021-09-28selftests, bpf: Fix makefile dependencies on libbpfJiri Benc1-1/+2
When building bpf selftest with make -j, I'm randomly getting build failures such as this one: In file included from progs/bpf_flow.c:19: [...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found #include "bpf_helper_defs.h" ^~~~~~~~~~~~~~~~~~~ The file that fails the build varies between runs but it's always in the progs/ subdir. The reason is a missing make dependency on libbpf for the .o files in progs/. There was a dependency before commit 3ac2e20fba07e but that commit removed it to prevent unneeded rebuilds. However, that only works if libbpf has been built already; the 'wildcard' prerequisite does not trigger when there's no bpf_helper_defs.h generated yet. Keep the libbpf as an order-only prerequisite to satisfy both goals. It is always built before the progs/ objects but it does not trigger unnecessary rebuilds by itself. Fixes: 3ac2e20fba07e ("selftests/bpf: BPF object files should depend only on libbpf headers") Signed-off-by: Jiri Benc <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/ee84ab66436fba05a197f952af23c98d90eb6243.1632758415.git.jbenc@redhat.com
2021-09-28bpf, test, cgroup: Use sk_{alloc,free} for test casesDaniel Borkmann1-5/+9
BPF test infra has some hacks in place which kzalloc() a socket and perform minimum init via sock_net_set() and sock_init_data(). As a result, the sk's skcd->cgroup is NULL since it didn't go through proper initialization as it would have been the case from sk_alloc(). Rather than re-adding a NULL test in sock_cgroup_ptr() just for this, use sk_{alloc,free}() pair for the test socket. The latter also allows to get rid of the bpf_sk_storage_free() special case. Fixes: 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") Fixes: b7a1848e8398 ("bpf: add BPF_PROG_TEST_RUN support for flow dissector") Fixes: 2cb494a36c98 ("bpf: add tests for direct packet access from CGROUP_SKB") Reported-by: [email protected] Reported-by: [email protected] Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Tested-by: [email protected] Tested-by: [email protected] Link: https://lore.kernel.org/bpf/[email protected]
2021-09-28bpf, cgroup: Assign cgroup in cgroup_sk_alloc when called from interruptDaniel Borkmann1-5/+12
If cgroup_sk_alloc() is called from interrupt context, then just assign the root cgroup to skcd->cgroup. Prior to commit 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") we would just return, and later on in sock_cgroup_ptr(), we were NULL-testing the cgroup in fast-path, and iff indeed NULL returning the root cgroup (v ?: &cgrp_dfl_root.cgrp). Rather than re-adding the NULL-test to the fast-path we can just assign it once from cgroup_sk_alloc() given v1/v2 handling has been simplified. The migration from NULL test with returning &cgrp_dfl_root.cgrp to assigning &cgrp_dfl_root.cgrp directly does /not/ change behavior for callers of sock_cgroup_ptr(). syzkaller was able to trigger a splat in the legacy netrom code base, where the RX handler in nr_rx_frame() calls nr_make_new() which calls sk_alloc() and therefore cgroup_sk_alloc() with in_interrupt() condition. Thus the NULL skcd->cgroup, where it trips over on cgroup_sk_free() side given it expects a non-NULL object. There are a few other candidates aside from netrom which have similar pattern where in their accept-like implementation, they just call to sk_alloc() and thus cgroup_sk_alloc() instead of sk_clone_lock() with the corresponding cgroup_sk_clone() which then inherits the cgroup from the parent socket. None of them are related to core protocols where BPF cgroup programs are running from. However, in future, they should follow to implement a similar inheritance mechanism. Additionally, with a !CONFIG_CGROUP_NET_PRIO and !CONFIG_CGROUP_NET_CLASSID configuration, the same issue was exposed also prior to 8520e224f547 due to commit e876ecc67db8 ("cgroup: memcg: net: do not associate sock with unrelated cgroup") which added the early in_interrupt() return back then. Fixes: 8520e224f547 ("bpf, cgroups: Fix cgroup v2 fallback on v1/v2 mixed mode") Fixes: e876ecc67db8 ("cgroup: memcg: net: do not associate sock with unrelated cgroup") Reported-by: [email protected] Reported-by: [email protected] Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]> Tested-by: [email protected] Tested-by: [email protected] Acked-by: Tejun Heo <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-28libbpf: Fix segfault in static linker for objects without BTFKumar Kartikeya Dwivedi1-1/+7
When a BPF object is compiled without BTF info (without -g), trying to link such objects using bpftool causes a SIGSEGV due to btf__get_nr_types accessing obj->btf which is NULL. Fix this by checking for the NULL pointer, and return error. Reproducer: $ cat a.bpf.c extern int foo(void); int bar(void) { return foo(); } $ cat b.bpf.c int foo(void) { return 0; } $ clang -O2 -target bpf -c a.bpf.c $ clang -O2 -target bpf -c b.bpf.c $ bpftool gen obj out a.bpf.o b.bpf.o Segmentation fault (core dumped) After fix: $ bpftool gen obj out a.bpf.o b.bpf.o libbpf: failed to find BTF info for object 'a.bpf.o' Error: failed to link 'a.bpf.o': Unknown error -22 (-22) Fixes: a46349227cd8 (libbpf: Add linker extern resolution support for functions and global variables) Signed-off-by: Kumar Kartikeya Dwivedi <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-28MAINTAINERS: Add btf headers to BPFDave Marchevsky1-0/+2
BPF folks maintain these and they're not picked up by the current MAINTAINERS entries. Files caught by the added globs: include/linux/btf.h include/linux/btf_ids.h include/uapi/linux/btf.h Signed-off-by: Dave Marchevsky <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-28bpf: Exempt CAP_BPF from checks against bpf_jit_limitLorenz Bauer1-1/+1
When introducing CAP_BPF, bpf_jit_charge_modmem() was not changed to treat programs with CAP_BPF as privileged for the purpose of JIT memory allocation. This means that a program without CAP_BPF can block a program with CAP_BPF from loading a program. Fix this by checking bpf_capable() in bpf_jit_charge_modmem(). Fixes: 2c78ee898d8f ("bpf: Implement CAP_BPF") Signed-off-by: Lorenz Bauer <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2021-09-28Merge tag 'drm/tegra/for-5.15-rc3' of ↵Dave Airlie4-12/+5
ssh://git.freedesktop.org/git/tegra/linux into drm-fixes drm/tegra: Fixes for v5.15-rc3 This contains a fix for an UAPI error that happens when no IOMMU is enabled, as well as a few build warning fixes and plugs a potential memory leak. Signed-off-by: Dave Airlie <[email protected]> From: Thierry Reding <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2021-09-28MAINTAINERS: rename cifs_common to smbfs_common in cifs and ksmbd entryNamjae Jeon1-2/+2
commit 23e91d8b7c5a("cifs: rename cifs_common to smbfs_common") cause the following warning from get_maintainer.pl. ./scripts/get_maintainer.pl --self-test=patterns complains: warning: no file matches F: fs/cifs_common/ This patch rename cifs_common to smbfs_common in cifs and ksmbd entry. Reported-by: Lukas Bulwahn <[email protected]> Signed-off-by: Namjae Jeon <[email protected]> Signed-off-by: Steve French <[email protected]>
2021-09-27Merge tag 'perf-tools-fixes-for-v5.15-2021-09-27' of ↵Linus Torvalds20-43/+70
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools fixes from Arnaldo Carvalho de Melo: - Fix 'perf test' DWARF unwind for optimized builds. - Fix 'perf test' 'Object code reading' when dealing with samples in @plt symbols. - Fix off-by-one directory paths in the ARM support code. - Fix error message to eliminate confusion in 'perf config' when first creating a config file. - 'perf iostat' fix for system wide operation. - Fix printing of metrics when 'perf iostat' is used with one or more iio_root_ports and unconnected cpus (using -C). - Fix several typos in the documentation files. - Fix spelling mistake "icach" -> "icache" in the power8 JSON vendor files. * tag 'perf-tools-fixes-for-v5.15-2021-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf iostat: Fix Segmentation fault from NULL 'struct perf_counts_values *' perf iostat: Use system-wide mode if the target cpu_list is unspecified perf config: Refine error message to eliminate confusion perf doc: Fix typos all over the place perf arm: Fix off-by-one directory paths. perf vendor events powerpc: Fix spelling mistake "icach" -> "icache" perf tests: Fix flaky test 'Object code reading' perf test: Fix DWARF unwind for optimized builds.
Powered by cgit, Gruvboxed by Blaster4385.