aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-31btrfs: drop fs_info parameter from tree_mod_log_set_node_keyDavid Sterba1-11/+8
It's provided by the extent_buffer. Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: document more parameters of submit_extent_pageDavid Sterba1-0/+12
Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: cleanup merging conditions in submit_extent_pageDavid Sterba1-17/+9
The merge call was factored out to a separate helper but it's a trivial one and arguably we can opencode it and cache the value. Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: remove redundant variable in __do_readpageDavid Sterba1-3/+1
The value of page_end is only stored to end, no other use. Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: assume that bio_ret is always valid in submit_extent_pageDavid Sterba1-5/+5
All callers pass a valid pointer so we can drop the redundant checks. The call to submit_one_bio never happend and can be removed. Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31Btrfs: scrub: batch rebuild for raid56Liu Bo1-18/+61
In case of raid56, writes and rebuilds always take BTRFS_STRIPE_LEN(64K) as unit, however, scrub_extent() sets blocksize as unit, so rebuild process may be triggered on every block on a same stripe. A typical example would be that when we're replacing a disappeared disk, all reads on the disks get -EIO, every block (size is 4K if blocksize is 4K) would go thru these, scrub_handle_errored_block scrub_recheck_block # re-read pages one by one scrub_recheck_block # rebuild by calling raid56_parity_recover() page by page Although with raid56 stripe cache most of reads during rebuild can be avoided, the parity recover calculation(xor or raid6 algorithms) needs to be done $(BTRFS_STRIPE_LEN / blocksize) times. This makes it smarter by doing raid56 scrub/replace on stripe length. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: sort and group mount option definitionsDavid Sterba1-53/+86
Sort mount options by the primary name, followed by the 'no-' counterpart if it exists. Group the deprecated and debugging options. Enum and token defintions are synced. Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: Add nossd_spread mount optionHoward McLauchlan1-4/+7
Btrfs has two mount options for SSD optimizations: ssd and ssd_spread. Presently there is an option to disable all SSD optimizations, but there isn't an option to disable just ssd_spread. This patch adds a mount option nossd_spread that disables ssd_spread only. Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: Howard McLauchlan <hmclauchlan@fb.com> Reviewed-by: Omar Sandoval <osandov@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: Remove btrfs_fs_info::open_ioctl_transNikolay Borisov3-9/+4
Since userspace transaction have been removed we no longer have use for this field so delete it. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: Remove code referencing unused TRANS_USERSPACENikolay Borisov2-26/+7
Now that the userspace transaction ioctls have been removed, TRANS_USERSPACE is no longer used hence we can remove it. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: Remove btrfs_file_private::transNikolay Borisov1-1/+0
Now that the userspace transaction IOCTL have been removed, this member is no longer used so just remove it Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: Remove userspace transaction ioctlsNikolay Borisov3-104/+0
Commit 3558d4f88ec8 ("btrfs: Deprecate userspace transaction ioctls") marked the beginning of the end of userspace transaction. This commit finishes the job! There are no known users and ceph does not use the ioctl anymore. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Acked-by: Sage Weil <sage@redhat.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: qgroup: Fix root item corruption when multiple same source snapshots ↵Qu Wenruo1-1/+9
are created with quota enabled When multiple pending snapshots referring to the same source subvolume are executed, enabled quota will cause root item corruption, where root items are using old bytenr (no backref in extent tree). This can be triggered by fstests btrfs/152. The cause is when source subvolume is still dirty, extra commit (simplied transaction commit) of qgroup_account_snapshot() can skip dirty roots not recorded in current transaction, making root item of source subvolume not updated. Fix it by forcing recording source subvolume in current transaction before qgroup sub-transaction commit. Reported-by: Justin Maggard <jmaggard@netgear.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: Relax memory barrier in btrfs_tree_unlockNikolay Borisov1-1/+1
When performing an unlock on an extent buffer we'd like to order the decrement of extent_buffer::blocking_writers with waking up any waiters. In such situations it's sufficient to use smp_mb__after_atomic rather than the heavy smp_mb. On architectures where atomic operations are fully ordered (such as x86 or s390) unconditionally executing a heavyweight smp_mb instruction causes a severe hit to performance while bringin no improvements in terms of correctness. The better thing is to use the appropriate smp_mb__after_atomic routine which will do the correct thing (invoke a full smp_mb or in the case of ordered atomics insert a compiler barrier). Put another way, an RMW atomic op + smp_load__after_atomic equals, in terms of semantics, to a full smp_mb. This ensures that none of the problems described in the accompanying comment of waitqueue_active occur. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: add define for oldest generationAnand Jain5-6/+8
Some functions can filter metadata by the generation. Add a define that will annotate such arguments. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: open code trivial helper btrfs_page_exists_in_rangeDavid Sterba3-9/+4
The called function name is self explanatory. Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-31btrfs: Use filemap_range_has_page()Matthew Wilcox2-71/+5
The current implementation of btrfs_page_exists_in_range() gives the wrong answer if the workingset code has stored a shadow entry in the page cache. The filemap_range_has_page() function does not have this problem, and it's shared code, so use it instead. eigned-off-by: Matthew Wilcox <mawilcox@microsoft.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26Btrfs: dev-replace: make sure target is identical to source when raid56 ↵Liu Bo1-2/+11
rebuild fails In the last step of scrub_handle_error_block, we try to combine good copies on all possible mirrors, this works fine for raid1 and raid10, but not for raid56 as it's doing parity rebuild. If parity rebuild doesn't get back with correct data which matches its checksum, in case of replace we'd rather write what is stored in the source device than the data calculuated from parity. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26Btrfs: raid56: remove redundant async_missing_raid56Liu Bo1-17/+1
async_missing_raid56() is identical to async_read_rebuild(). Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: adjust return values of btrfs_inode_by_nameSu Yue1-12/+10
Previously, btrfs_inode_by_name() returned 0 which left caller to check objectid of location even location if the type was invalid. Let btrfs_inode_by_name() return -EUCLEAN if a corrupted location of a dir entry is found. Removal of label out_err also simplifies the function. Signed-off-by: Su Yue <suy.fnst@cn.fujitsu.com> Reviewed-by: David Sterba <dsterba@suse.com> [ drop unlikely ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: rename btrfs_close_extra_device to btrfs_free_extra_devidsAnand Jain3-6/+10
This function btrfs_close_extra_devices() is about freeing extra devids which once it may have belonged to this filesystem. So rename it and add the comment. The _devid suffix is appropriate as this function won't handle devices which are outside of the filesytem being mounted. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: Remove root argument from cow_file_range_inlineNikolay Borisov1-8/+7
This argument is always set to the root of the inode, which is also passed. So let's get a reference inside the function and simplify the arg list. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26Btrfs: send: fix typo in TLV_PUTLiu Bo1-2/+2
According to tlv_put()'s prototype, data and attrlen needs to be exchanged in the macro, but seems all callers are already aware of this misorder and are therefore not affected. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: Remove root argument from btrfs_log_dentry_safeNikolay Borisov3-3/+3
Now that nothing uses the root arg of btrfs_log_dentry_safe it can be safely removed. No functional changes. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: Remove root arg from btrfs_log_inode_parentNikolay Borisov1-7/+6
btrfs_log_inode_parent is called from 2 places (btrfs_log_dentry_safe and btrfs_log_new_name) both of which pass inode->root as the root argument and the inode itself. Remove the redundant root argument and get a reference to the root directly from the inode, also remove redundant root != inode->root check from the same function. No functional change. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: Remove redundant comment from btrfs_search_forwardNikolay Borisov1-3/+0
This function always sets keep_locks to 1 and saves the old value of keep_locks which is restored at the end. So there is no way it can be called without keep_locks being set. Remove comment imposing redundant requirement on callers. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: move btrfs_listxattr prototype to xattr.hDavid Sterba2-3/+1
There's a proper header for xattr handlers. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: adjust return type of btrfs_getxattrDavid Sterba2-2/+2
The xattr_handler::get prototype returns int, use it. The only ssize_t exception is the per-inode listxattr handler. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: drop extern from function declarationsDavid Sterba2-5/+5
Extern for functions does not make any difference, there are only a few so let's remove them before it's too late. Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: drop underscores from exported xattr functionsDavid Sterba4-14/+14
Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26Btrfs: send, do not issue unnecessary truncate operationsFilipe Manana1-5/+21
When send finishes processing an inode representing a regular file, it always issues a truncate operation for that file, even if its size did not change or the last write sets the file size correctly. In the most common cases, the issued write operations set the file to correct size (either full or incremental sends) or the file size did not change (for incremental sends), so the only case where a truncate operation is needed is when a file size becomes smaller in the send snapshot when compared to the parent snapshot. By not issuing unnecessary truncate operations we reduce the stream size and save time in the receiver. Currently truncating a file to the same size triggers writeback of its last page (if it's dirty) and waits for it to complete (only if the file size is not aligned with the filesystem's sector size). This is being fixed by another patch and is independent of this change (that patch's title is "Btrfs: skip writeback of last page when truncating file to same size"). The following script was used to measure time spent by a receiver without this change applied, with this change applied, and without this change and with the truncate fix applied (the fix to not make it start and wait for writeback to complete). $ cat test_send.sh #!/bin/bash SRC_DEV=/dev/sdc DST_DEV=/dev/sdd SRC_MNT=/mnt/sdc DST_MNT=/mnt/sdd mkfs.btrfs -f $SRC_DEV >/dev/null mkfs.btrfs -f $DST_DEV >/dev/null mount $SRC_DEV $SRC_MNT mount $DST_DEV $DST_MNT echo "Creating source filesystem" for ((t = 0; t < 10; t++)); do ( for ((i = 1; i <= 20000; i++)); do xfs_io -f -c "pwrite -S 0xab 0 5000" \ $SRC_MNT/file_$i > /dev/null done ) & worker_pids[$t]=$! done wait ${worker_pids[@]} echo "Creating and sending snapshot" btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null /usr/bin/time -f "send took %e seconds" \ btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1 /usr/bin/time -f "receive took %e seconds" \ btrfs receive -f $SRC_MNT/send_file $DST_MNT umount $SRC_MNT umount $DST_MNT The results, which are averages for 5 runs for each case, were the following: * Without this change average receive time was 26.49 seconds standard deviation of 2.53 seconds * Without this change and with the truncate fix average receive time was 12.51 seconds standard deviation of 0.32 seconds * With this change and without the truncate fix average receive time was 10.02 seconds standard deviation of 1.11 seconds Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26Btrfs: skip writeback of last page when truncating file to same sizeFilipe Manana1-8/+10
When we truncate a file to the same size and that size is not aligned with the sector size, we end up triggering writeback (and wait for it to complete) of the last page. This is unncessary as we can not have delayed allocation beyond the inode's i_size and the goal of truncating a file to its own size is to discard prealloc extents (allocated via the fallocate(2) system call). Besides the unnecessary IO start and wait, it also breaks the oppurtunity for larger contiguous extents on disk, as before the last dirty page there might be other dirty pages. This scenario is probably not very common in general, however it is common for btrfs receive implementations because currently the send stream always issues a truncate operation for each processed inode as the last operation for that inode (this truncate operation is not always needed and the send implementation will be addressed to avoid them). So improve this by not starting and waiting for writeback of the inode's last page when we are truncating to exactly the same size. The following script was used to quickly measure the time a receive operation takes: $ cat test_send.sh #!/bin/bash SRC_DEV=/dev/sdc DST_DEV=/dev/sdd SRC_MNT=/mnt/sdc DST_MNT=/mnt/sdd mkfs.btrfs -f $SRC_DEV >/dev/null mkfs.btrfs -f $DST_DEV >/dev/null mount $SRC_DEV $SRC_MNT mount $DST_DEV $DST_MNT echo "Creating source filesystem" for ((t = 0; t < 10; t++)); do ( for ((i = 1; i <= 20000; i++)); do xfs_io -f -c "pwrite -S 0xab 0 5000" \ $SRC_MNT/file_$i > /dev/null done ) & worker_pids[$t]=$! done wait ${worker_pids[@]} echo "Creating and sending snapshot" btrfs subvolume snapshot -r $SRC_MNT $SRC_MNT/snap1 >/dev/null /usr/bin/time -f "send took %e seconds" \ btrfs send -f $SRC_MNT/send_file $SRC_MNT/snap1 /usr/bin/time -f "receive took %e seconds" \ btrfs receive -f $SRC_MNT/send_file $DST_MNT umount $SRC_MNT umount $DST_MNT The results for 5 runs were the following: * Without this change average receive time was 26.49 seconds standard deviation of 2.53 seconds * With this change average receive time was 12.51 seconds standard deviation of 0.32 seconds Reported-by: Robbie Ko <robbieko@synology.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26Btrfs: dev-replace: skip prealloc extents when copy nocow pagesLiu Bo1-1/+2
It doens't make sense to process prealloc extents as pages will be filled with zero when reading prealloc extents. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: unify types for metadata_ratio and data_chunk_allocationsAnand Jain2-3/+3
We have btrfs_fs_info::data_chunk_allocations and btrfs_fs_info::metadata_ratio declared as unsigned which would be unsinged int and kernel style prefers unsigned int over bare unsigned. So this patch changes them to u32. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: Remove redundant memory barriers around dio_private error statusNikolay Borisov1-8/+9
Using any kind of memory barriers around atomic operations which have a return value is redundant, since those operations themselves are fully ordered. atomic_t.txt states: - RMW operations that have a return value are fully ordered; Fully ordered primitives are ordered against everything prior and everything subsequent. Therefore a fully ordered primitive is like having an smp_mb() before and an smp_mb() after the primitive. Given this let's replace the extra memory barriers with comments. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: remove assert in btrfs_init_dev_replace_tgtdev()Anand Jain1-1/+0
In the same function we just ran btrfs_alloc_device() which means the btrfs_device::resized_list is sure to be empty and we are protected with the btrfs_fs_info::volume_mutex. Signed-off-by: Anand Jain <anand.jain@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: add more __cold annotationsDavid Sterba23-24/+29
The __cold functions are placed to a special section, as they're expected to be called rarely. This could help i-cache prefetches or help compiler to decide which branches are more/less likely to be taken without any other annotations needed. Though we can't add more __exit annotations, it's still possible to add __cold (that's also added with __exit). That way the following function categories are tagged: - printf wrappers, error messages - exit helpers Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: add (the only possible) __exit annotationDavid Sterba2-2/+2
Recently, the __init annotations have been added. There's unfortunatelly only one case where we can add __exit, because most of the cleanup helpers are also called from the __init phase. As the __exit annotated functions get discarded completely for a built-in code, we'd miss them from the init phase. Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: verify subvolid mount parameterAnand Jain1-12/+9
We aren't verifying the parameter passed to the subvolid mount option, so we won't report and fail the mount if a junk value is specified for example, -o subvolid=abc. This patch verifies the subvolid option with match_u64. Up to now the memparse function accepts the K/M/G/ suffixes, that are usually meant for size values and do not make sense for a subvolume it. Signed-off-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: David Sterba <dsterba@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26Btrfs: fix unexpected cow in run_delalloc_nocowLiu Bo1-5/+32
Fstests generic/475 provides a way to fail metadata reads while checking if checksum exists for the inode inside run_delalloc_nocow(), and csum_exist_in_range() interprets error (-EIO) as inode having checksum and makes its caller enter the cow path. In case of free space inode, this ends up with a warning in cow_file_range(). The same problem applies to btrfs_cross_ref_exist() since it may also read metadata in between. With this, run_delalloc_nocow() bails out when errors occur at the two places. cc: <stable@vger.kernel.org> v2.6.28+ Fixes: 17d217fe970d ("Btrfs: fix nodatasum handling in balancing code") Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: Remove custom crc32c init codeNikolay Borisov16-127/+35
The custom crc32 init code was introduced in 14a958e678cd ("Btrfs: fix btrfs boot when compiled as built-in") to enable using btrfs as a built-in. However, later as pointed out by 60efa5eb2e88 ("Btrfs: use late_initcall instead of module_init") this wasn't enough and finally btrfs was switched to late_initcall which comes after the generic crc32c implementation is initiliased. The latter commit superseeded the former. Now that we don't have to maintain our own code let's just remove it and switch to using the generic implementation. Despite touching a lot of files the patch is really simple. Here is the gist of the changes: 1. Select LIBCRC32C rather than the low-level modules. 2. s/btrfs_crc32c/crc32c/g 3. replace hash.h with linux/crc32c.h 4. Move the btrfs namehash funcs to ctree.h and change the tree accordingly. I've tested this with btrfs being both a module and a built-in and xfstest doesn't complain. Does seem to fix the longstanding problem of not automatically selectiong the crc32c module when btrfs is used. Possibly there is a workaround in dracut. The modinfo confirms that now all the module dependencies are there: before: depends: zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate after: depends: libcrc32c,zstd_compress,zstd_decompress,raid6_pq,xor,zlib_deflate Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> [ add more info to changelog from mails ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26libcrc32c: Add crc32c_impl functionNikolay Borisov2-0/+7
This function returns a string with the currently in-use implementation of the crc32c algorithm, i.e crc32c-generic (for unoptimised, generic implementation) or crc32c-intel for the sse optimised version. This will be used by btrfs. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> [ use crypto_shash_driver_name as suggested by Herbert ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: Refactor __get_raid_index() to btrfs_bg_flags_to_raid_index()Qu Wenruo4-34/+33
Function __get_raid_index() is used to convert block group flags into raid index, which can be used to get various info directly from btrfs_raid_array[]. Refactor this function a little: 1) Rename to btrfs_bg_flags_to_raid_index() Double underline prefix is normally for internal functions, while the function is used by both extent-tree and volumes. Although the name is a little longer, but it should explain its usage quite well. 2) Move it to volumes.h and make it static inline Just several if-else branches, really no need to define it as a normal function. This also makes later code re-use between kernel and btrfs-progs easier. 3) Remove function get_block_group_index() Really no need to do such a simple thing as an exported function. Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Anand Jain <anand.jain@oracle.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: tree-checker: Replace root parameter with fs_infoQu Wenruo3-78/+82
When inspecting the error message with real corruption, the "root=%llu" always shows "1" (root tree), instead of the correct owner. The problem is that we are getting @root from page->mapping->host, which points the same btree inode, so we will always get the same root. This makes the root owner output meaningless, and harder to port tree-checker to btrfs-progs. So get rid of the false and meaningless @root parameter and replace it with @fs_info. To get the owner, we can only rely on btrfs_header_owner() now. Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26Btrfs: add tracepoint for em's EEXIST caseLiu Bo2-0/+38
This is adding a tracepoint 'btrfs_handle_em_exist' to help debug the subtle bugs around merge_extent_mapping. Signed-off-by: Liu Bo <bo.li.liu@oracle.com> Reviewed-by: Josef Bacik <jbacik@fb.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: Move qgroup rescan on quota enable to btrfs_quota_enableNikolay Borisov2-26/+10
Currently btrfs_run_qgroups is doing a bit too much. Not only is it responsible for synchronizing in-memory state of qgroups to disk but it also contains code to trigger the initial qgroup rescan when quota is enabled initially. This condition is detected by checking that BTRFS_FS_QUOTA_ENABLED is not set and BTRFS_FS_QUOTA_ENABLING is set. Nothing really requires from the code to be structured (and scattered) the way it is so let's streamline things. First move the quota rescan code into btrfs_quota_enable, where its invocation is closer to the use. This also makes the FS_QUOTA_ENABLING flag redundant so let's remove it as well. This has been tested with a full xfstest run with qgroups enabled on the scratch device of every xfstest and no regressions were observed. Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: use reada direction enum instead of constant value in ↵Gu JinXiang1-1/+1
load_free_space_tree load_free_space_tree calls either function load_free_space_bitmaps or load_free_space_extents. And either of those two will lead to call btrfs_next_item. So in function load_free_space_tree, use READA_FORWARD to read forward ahead. This also changes the value from READA_BACK to READA_FORWARD, since according to the logic, it should reada_for_search forward, not backward. Signed-off-by: Gu JinXiang <gujx@cn.fujitsu.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: use reada direction enum instead of constant value in ↵Gu Jinxiang1-1/+1
populate_free_space_tree populate_free_space_tree calls function btrfs_search_slot_for_read with parameter int find_higher = 1, it means that, if no exact match is found, then use the next higher item. So in function populate_free_space_tree, use READA_FORWARD to read forward ahead. This also changes the value from READA_BACK to READA_FORWARD, since according to the logic, it should reada_for_search forward, not backward. Signed-off-by: Gu JinXiang <gujx@cn.fujitsu.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> [ update changelog ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: Remove btrfs_inode::delayed_iput_countNikolay Borisov2-15/+13
delayed_iput_count wa supposed to be used to implement, well, delayed iput. The idea is that we keep accumulating the number of iputs we do until eventually the inode is deleted. Turns out we never really switched the delayed_iput_count from 0 to 1, hence all conditional code relying on the value of that member being different than 0 was never executed. This, as it turns out, didn't cause any problem due to the simple fact that the generic inode's i_count member was always used to count the number of iputs. So let's just remove the unused member and all unused code. This patch essentially provides no functional changes. While at it, also add proper documentation for btrfs_add_delayed_iput Signed-off-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: David Sterba <dsterba@suse.com> [ reformat comment ] Signed-off-by: David Sterba <dsterba@suse.com>
2018-03-26btrfs: volumes: Cleanup stripe size calculationQu Wenruo1-7/+6
Cleanup the following things: 1) open coded SZ_16M round up 2) use min() to replace open-coded size comparison 3) code style Signed-off-by: Qu Wenruo <wqu@suse.com> Reviewed-by: Nikolay Borisov <nborisov@suse.com> Reviewed-by: Gu Jinxiang <gujx@cn.fujitsu.com> [ reformat comment ] Signed-off-by: David Sterba <dsterba@suse.com>
Powered by cgit, Gruvboxed by Blaster4385.