aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-02-08nfp: don't advertise hw-tc-offload on non-port netdevsJakub Kicinski1-1/+1
nfp_port is a structure which represents an ASIC port, both PCIe vNIC (on a PF or a VF) or the external MAC port. vNIC netdev (struct nfp_net) and pure representor netdev (struct nfp_repr) both have a pointer to this structure. nfp_reprs always have a port associated. nfp_nets, however, only represent a device port in legacy mode, where they are considered the MAC port. In switchdev mode they are just the CPU's side of the PCIe link. By definition TC offloads only apply to device ports. Don't set the flag on vNICs without a port (i.e. in switchdev mode). Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-08nfp: bpf: require ETH tableJakub Kicinski1-0/+12
Upcoming changes will require all netdevs supporting TC offloads to have a full struct nfp_port. Require those for BPF offload. The operation without management FW reporting information about Ethernet ports is something we only support for very old and very basic NIC firmwares anyway. Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Simon Horman <simon.horman@netronome.com> Tested-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-08Revert "ath10k: add sanity check to ie_len before parsing fw/board ie"Ryan Hsu1-7/+7
This reverts commit 9ed4f91628737c820af6a1815b65bc06bd31518f. The commit introduced a regression that over read the ie with the padding. - the expected IE information ath10k_pci 0000:03:00.0: found firmware features ie (1 B) ath10k_pci 0000:03:00.0: Enabling feature bit: 6 ath10k_pci 0000:03:00.0: Enabling feature bit: 7 ath10k_pci 0000:03:00.0: features ath10k_pci 0000:03:00.0: 00000000: c0 00 00 00 00 00 00 00 - the wrong IE with padding is read (0x77) ath10k_pci 0000:03:00.0: found firmware features ie (4 B) ath10k_pci 0000:03:00.0: Enabling feature bit: 6 ath10k_pci 0000:03:00.0: Enabling feature bit: 7 ath10k_pci 0000:03:00.0: Enabling feature bit: 8 ath10k_pci 0000:03:00.0: Enabling feature bit: 9 ath10k_pci 0000:03:00.0: Enabling feature bit: 10 ath10k_pci 0000:03:00.0: Enabling feature bit: 12 ath10k_pci 0000:03:00.0: Enabling feature bit: 13 ath10k_pci 0000:03:00.0: Enabling feature bit: 14 ath10k_pci 0000:03:00.0: Enabling feature bit: 16 ath10k_pci 0000:03:00.0: Enabling feature bit: 17 ath10k_pci 0000:03:00.0: Enabling feature bit: 18 ath10k_pci 0000:03:00.0: features ath10k_pci 0000:03:00.0: 00000000: c0 77 07 00 00 00 00 00 Tested-by: Mike Lothian <mike@fireburn.co.uk> Signed-off-by: Ryan Hsu <ryanhsu@codeaurora.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
2018-02-08Merge branch 'bpf-misc-nfp-bpftool-doc-fixes'Daniel Borkmann6-10/+81
Jakub Kicinski says: ==================== First patch in this series fixes applying the relocation to immediate load instructions in the NFP JIT. The remaining patches come from Quentin. Small addition to libbpf makes sure it recognizes all standard section names. Makefile in bpftool/Documentation is improved to explicitly check for rst2man being installed on the system, otherwise we risk installing empty files. Man page for bpftool-map is corrected to include program as a potential value for map of programs. Last two patches are slightly longer, those update bash completions to include this release cycle's additions from Roman. Maybe the use of Fixes tags is slightly frivolous there, but having bash completions which don't cover all commands and options could be disruptive to work flow for users. ==================== Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08tools: bpftool: add bash completion for cgroup commandsQuentin Monnet2-6/+62
Add bash completion for "bpftool cgroup" command family. While at it, also fix the formatting of some keywords in the man page for cgroups. Fixes: 5ccda64d38cc ("bpftool: implement cgroup bpf operations") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08tools: bpftool: add bash completion for `bpftool prog load`Quentin Monnet1-2/+6
Add bash completion for bpftool command `prog load`. Completion for this command is easy, as it only takes existing file paths as arguments. Fixes: 49a086c201a9 ("bpftool: implement prog load command") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08tools: bpftool: make syntax for program map update explicit in man pageQuentin Monnet1-1/+2
Specify in the documentation that when using bpftool to update a map of type BPF_MAP_TYPE_PROG_ARRAY, the syntax for the program used as a value should use the "id|tag|pinned" keywords convention, as used with "bpftool prog" commands. Fixes: ff69c21a85a4 ("tools: bpftool: add documentation") Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08tools: bpftool: exit doc Makefile early if rst2man is not availableQuentin Monnet1-0/+5
If rst2man is not available on the system, running `make doc` from the bpftool directory fails with an error message. However, it creates empty manual pages (.8 files in this case). A subsequent call to `make doc-install` would then succeed and install those empty man pages on the system. To prevent this, raise a Makefile error and exit immediately if rst2man is not available before generating the pages from the rst documentation. Fixes: ff69c21a85a4 ("tools: bpftool: add documentation") Reported-by: Jason van Aaardt <jason.vanaardt@netronome.com> Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08libbpf: complete list of strings for guessing program typeQuentin Monnet1-0/+5
It seems that the type guessing feature for libbpf, based on the name of the ELF section the program is located in, was inspired from samples/bpf/prog_load.c, which was not used by any sample for loading programs of certain types such as TC actions and classifiers, or LWT-related types. As a consequence, libbpf is not able to guess the type of such programs and to load them automatically if type is not provided to the `bpf_load_prog()` function. Add ELF section names associated to those eBPF program types so that they can be loaded with e.g. bpftool as well. Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com> Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08nfp: bpf: fix immed relocation for larger offsetsJakub Kicinski1-1/+1
Immed relocation is missing a shift which means for larger offsets the lower and higher part of the address would be ORed together. Fixes: ce4ebfd859c3 ("nfp: bpf: add helpers for updating immediate instructions") Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com> Reviewed-by: Jiong Wang <jiong.wang@netronome.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-08Merge branches 'acpi-video', 'acpi-battery' and 'acpi-cppc'Rafael J. Wysocki3-2/+18
* acpi-video: ACPI / video: Use true for boolean value * acpi-battery: ACPI / battery: Add quirk for Asus UX360UA and UX410UAK * acpi-cppc: ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit
2018-02-08Merge branches 'acpi-tables', 'acpi-bus' and 'acpi-processor'Rafael J. Wysocki14-47/+109
* acpi-tables: ACPI: SPCR: Make SPCR available to x86 ACPI / tables: Add IORT to injectable table list * acpi-bus: ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530 ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs ACPI / bus: Do not call _STA on battery devices with unmet dependencies PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status ACPI: export acpi_bus_get_status_handle() * acpi-processor: ACPI / processor: Set default C1 idle state description ACPI: processor_perflib: Do not send _PPC change notification if not ready
2018-02-08Merge branch 'acpica'Rafael J. Wysocki229-237/+237
* acpica: ACPICA: Update version to 20180105 ACPICA: All acpica: Update copyrights to 2018 ACPICA: Add a missing pair of parentheses ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR() ACPICA: Avoid NULL pointer arithmetic ACPICA: Linux: add support for X32 ABI compilation
2018-02-08CRIS: Restore mistakenly cleared kernel MakefileJesper Nilsson1-0/+17
Commit 0fbc0b67a89d7 ("cris: remove arch specific early DT functions") was a bit overzealous in removing the CRIS DT handling, and the complete contents of the Makefile was erased instead of just the line for the devicetree file. This lead to a complete link failure for all SoCs in the CRIS port due to missing symbols. Restore the contents except the line for the devicetree file. Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com> Fixes: 0fbc0b67a89d7
2018-02-08xen: Fix {set,clear}_foreign_p2m_mapping on autotranslating guestsSimon Gaiser1-0/+6
Commit 82616f9599a7 ("xen: remove tests for pvh mode in pure pv paths") removed the check for autotranslation from {set,clear}_foreign_p2m_mapping but those are called by grant-table.c also on PVH/HVM guests. Cc: <stable@vger.kernel.org> # 4.14 Fixes: 82616f9599a7 ("xen: remove tests for pvh mode in pure pv paths") Signed-off-by: Simon Gaiser <simon@invisiblethingslab.com> Reviewed-by: Juergen Gross <jgross@suse.com> Signed-off-by: Juergen Gross <jgross@suse.com>
2018-02-08Merge branches 'pm-cpufreq', 'pm-cpuidle' and 'pm-domains'Rafael J. Wysocki18-238/+166
* pm-cpufreq: arm: imx: Add MODULE_ALIAS for cpufreq cpufreq: Add and use cpufreq_for_each_{valid_,}entry_idx() cpufreq: intel_pstate: Enable HWP during system resume on CPU0 cpufreq: scpi: fix error return code in scpi_cpufreq_init() cpufreq: scpi: fix static checker warning cdev isn't an ERR_PTR cpufreq: remove at32ap-cpufreq cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ cpufreq: Skip cpufreq resume if it's not suspended * pm-cpuidle: x86: PM: Make APM idle driver initialize polling state * pm-domains: PM / domains: Fix up domain-idle-states OF parsing
2018-02-08arm: imx: Add MODULE_ALIAS for cpufreqNicolas Chauvet1-0/+1
Without this, the imx6q-cpufreq driver isn't loaded automatically when built as a module Tested on wandboard quad with a fedora 27 kernel rpm Signed-off-by: Nicolas Chauvet <kwizart@gmail.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-08cpufreq: Add and use cpufreq_for_each_{valid_,}entry_idx()Dominik Brodowski8-63/+100
Pointer subtraction is slow and tedious. Therefore, replace all instances where cpufreq_for_each_{valid_,}entry loops contained such substractions with an iteration macro providing an index to the frequency_table entry. Suggested-by: Al Viro <viro@ZenIV.linux.org.uk> Link: http://lkml.kernel.org/r/20180120020237.GM13338@ZenIV.linux.org.uk Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-08cpufreq: intel_pstate: Enable HWP during system resume on CPU0Chen Yu1-0/+5
When maxcpus=1 is in the kernel command line, the BP is responsible for re-enabling the HWP - because currently only the APs invoke intel_pstate_hwp_enable() during their online process - which might put the system into unstable state after resume. Fix this by enabling the HWP explicitly on BP during resume. Reported-by: Doug Smythies <dsmythies@telus.net> Suggested-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Yu Chen <yu.c.chen@intel.com> [ rjw: Subject/changelog, minor modifications ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-08cpufreq: scpi: fix error return code in scpi_cpufreq_init()Wei Yongjun1-0/+1
Fix to return a negative error code from the clk_get() error handling case instead of 0, as done elsewhere in this function. Fixes: 343a8d17fa8d (cpufreq: scpi: remove arm_big_little dependency) Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-08ACPI: sbshc: remove raw pointer from printk() messageGreg Kroah-Hartman1-2/+2
There's no need to be printing a raw kernel pointer to the kernel log at every boot. So just remove it, and change the whole message to use the correct dev_info() call at the same time. Reported-by: Wang Qize <wang_qize@venustech.com.cn> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-02-08s390/kconfig: Remove ARCH_WANTS_PROT_NUMA_PROT_NONE selectUlf Magnusson1-1/+0
The ARCH_WANTS_PROT_NUMA_PROT_NONE symbol was removed by commit 6a33979d5bd7 ("mm: remove misleading ARCH_USES_NUMA_PROT_NONE"), but S390 still selects it. Remove the ARCH_WANTS_PROT_NUMA_PROT_NONE select from the S390 symbol. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2018-02-08KVM: PPC: Book3S PR: Fix broken select due to misspellingUlf Magnusson1-1/+1
Commit 76d837a4c0f9 ("KVM: PPC: Book3S PR: Don't include SPAPR TCE code on non-pseries platforms") added a reference to the globally undefined symbol PPC_SERIES. Looking at the rest of the commit, PPC_PSERIES was probably intended. Change PPC_SERIES to PPC_PSERIES. Discovered with the https://github.com/ulfalizer/Kconfiglib/blob/master/examples/list_undefined.py script. Fixes: 76d837a4c0f9 ("KVM: PPC: Book3S PR: Don't include SPAPR TCE code on non-pseries platforms") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com> Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
2018-02-07tcp: tracepoint: only call trace_tcp_send_reset with full socketSong Liu2-2/+4
tracepoint tcp_send_reset requires a full socket to work. However, it may be called when in TCP_TIME_WAIT: case TCP_TW_RST: tcp_v6_send_reset(sk, skb); inet_twsk_deschedule_put(inet_twsk(sk)); goto discard_it; To avoid this problem, this patch checks the socket with sk_fullsock() before calling trace_tcp_send_reset(). Fixes: c24b14c46bb8 ("tcp: add tracepoint trace_tcp_send_reset") Signed-off-by: Song Liu <songliubraving@fb.com> Reviewed-by: Lawrence Brakmo <brakmo@fb.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-07sch_netem: Bug fixing in calculating Netem intervalMd. Islam1-1/+1
In Kernel 4.15.0+, Netem does not work properly. Netem setup: tc qdisc add dev h1-eth0 root handle 1: netem delay 10ms 2ms Result: PING 172.16.101.2 (172.16.101.2) 56(84) bytes of data. 64 bytes from 172.16.101.2: icmp_seq=1 ttl=64 time=22.8 ms 64 bytes from 172.16.101.2: icmp_seq=2 ttl=64 time=10.9 ms 64 bytes from 172.16.101.2: icmp_seq=3 ttl=64 time=10.9 ms 64 bytes from 172.16.101.2: icmp_seq=5 ttl=64 time=11.4 ms 64 bytes from 172.16.101.2: icmp_seq=6 ttl=64 time=11.8 ms 64 bytes from 172.16.101.2: icmp_seq=4 ttl=64 time=4303 ms 64 bytes from 172.16.101.2: icmp_seq=10 ttl=64 time=11.2 ms 64 bytes from 172.16.101.2: icmp_seq=11 ttl=64 time=10.3 ms 64 bytes from 172.16.101.2: icmp_seq=7 ttl=64 time=4304 ms 64 bytes from 172.16.101.2: icmp_seq=8 ttl=64 time=4303 ms Patch: (rnd % (2 * sigma)) - sigma was overflowing s32. After applying the patch, I found following output which is desirable. PING 172.16.101.2 (172.16.101.2) 56(84) bytes of data. 64 bytes from 172.16.101.2: icmp_seq=1 ttl=64 time=21.1 ms 64 bytes from 172.16.101.2: icmp_seq=2 ttl=64 time=8.46 ms 64 bytes from 172.16.101.2: icmp_seq=3 ttl=64 time=9.00 ms 64 bytes from 172.16.101.2: icmp_seq=4 ttl=64 time=11.8 ms 64 bytes from 172.16.101.2: icmp_seq=5 ttl=64 time=8.36 ms 64 bytes from 172.16.101.2: icmp_seq=6 ttl=64 time=11.8 ms 64 bytes from 172.16.101.2: icmp_seq=7 ttl=64 time=8.11 ms 64 bytes from 172.16.101.2: icmp_seq=8 ttl=64 time=10.0 ms 64 bytes from 172.16.101.2: icmp_seq=9 ttl=64 time=11.3 ms 64 bytes from 172.16.101.2: icmp_seq=10 ttl=64 time=11.5 ms 64 bytes from 172.16.101.2: icmp_seq=11 ttl=64 time=10.2 ms Reviewed-by: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-07net: ethernet: ti: cpsw: fix net watchdog timeoutGrygorii Strashko1-2/+14
It was discovered that simple program which indefinitely sends 200b UDP packets and runs on TI AM574x SoC (SMP) under RT Kernel triggers network watchdog timeout in TI CPSW driver (<6 hours run). The network watchdog timeout is triggered due to race between cpsw_ndo_start_xmit() and cpsw_tx_handler() [NAPI] cpsw_ndo_start_xmit() if (unlikely(!cpdma_check_free_tx_desc(txch))) { txq = netdev_get_tx_queue(ndev, q_idx); netif_tx_stop_queue(txq); ^^ as per [1] barier has to be used after set_bit() otherwise new value might not be visible to other cpus } cpsw_tx_handler() if (unlikely(netif_tx_queue_stopped(txq))) netif_tx_wake_queue(txq); and when it happens ndev TX queue became disabled forever while driver's HW TX queue is empty. Fix this, by adding smp_mb__after_atomic() after netif_tx_stop_queue() calls and double check for free TX descriptors after stopping ndev TX queue - if there are free TX descriptors wake up ndev TX queue. [1] https://www.kernel.org/doc/html/latest/core-api/atomic_ops.html Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-07ibmvnic: Ensure that buffers are NULL after freeThomas Falcon1-0/+5
This change will guard against a double free in the case that the buffers were previously freed at some other time, such as during a device reset. It resolves a kernel oops that occurred when changing the VNIC device's MTU. Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-07ibmvnic: Fix rx queue cleanup for non-fatal resetsJohn Allen1-1/+2
At some point, a check was added to exit the polling routine during resets. This makes sense for most reset conditions, but for a non-fatal error, we expect the polling routine to continue running to properly clean up the rx queues. This patch checks if we are performing a non-fatal reset and if we are, continues normal polling operation. Signed-off-by: John Allen <jallen@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-07i40e: Fix the number of queues available to be mapped for useAmritha Nambiar1-13/+14
Fix the number of queues per enabled TC and report available queues to the kernel without having to limit them to the max RSS limit so they are available to be mapped for XPS. This allows a queue per processing thread available for handling traffic for the given traffic class. Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com> Tested-by: Andrew Bowers <andrewx.bowers@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-07net/ipv6: onlink nexthop checks should default to main tableDavid Ahern1-2/+3
Because of differences in how ipv4 and ipv6 handle fib lookups, verification of nexthops with onlink flag need to default to the main table rather than the local table used by IPv4. As it stands an address within a connected route on device 1 can be used with onlink on device 2. Updating the table properly rejects the route due to the egress device mismatch. Update the extack message as well to show it could be a device mismatch for the nexthop spec. Fixes: fc1e64e1092f ("net/ipv6: Add support for onlink flag") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-07net/ipv6: Handle reject routes with onlink flagDavid Ahern1-1/+2
Verification of nexthops with onlink flag need to handle unreachable routes. The lookup is only intended to validate the gateway address is not a local address and if the gateway resolves the egress device must match the given device. Hence, hitting any default reject route is ok. Fixes: fc1e64e1092f ("net/ipv6: Add support for onlink flag") Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-07sun: Add SPDX license tags to Sun network driversShannon Nelson11-0/+11
Add the appropriate SPDX license tags to the Sun network drivers as outlined in Documentation/process/license-rules.rst. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-07rxrpc: Fix received abort handlingDavid Howells2-5/+14
AF_RXRPC is incorrectly sending back to the server any abort it receives for a client connection. This is due to the final-ACK offload to the connection event processor patch. The abort code is copied into the last-call information on the connection channel and then the event processor is set. Instead, the following should be done: (1) In the case of a final-ACK for a successful call, the ACK should be scheduled as before. (2) In the case of a locally generated ABORT, the ABORT details should be cached for sending in response to further packets related to that call and no further action scheduled at call disconnect time. (3) In the case of an ACK received from the peer, the call should be considered dead, no ABORT should be transmitted at this time. In response to further non-ABORT packets from the peer relating to this call, an RX_USER_ABORT ABORT should be transmitted. (4) In the case of a call killed due to network error, an RX_USER_ABORT ABORT should be cached for transmission in response to further packets, but no ABORT should be sent at this time. Fixes: 3136ef49a14c ("rxrpc: Delay terminal ACK transmission on a client call") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-07cxgb4: Fix error handling path in 'init_one()'Christophe JAILLET1-1/+1
Commit baf5086840ab1 ("cxgb4: restructure VF mgmt code") has reordered some code but an error handling label has not been updated accordingly. So fix it and free 'adapter' if 't4_wait_dev_ready()' fails. Fixes: baf5086840ab1 ("cxgb4: restructure VF mgmt code") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-02-07Make the xprtiod workqueue unbounded.Trond Myklebust1-1/+1
This should help reduce the latency on replies. Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
2018-02-08selftests: bpf: test_kmod.sh: check the module path before insmodNaresh Kamboju1-3/+15
test_kmod.sh reported false failure when module not present. Check test_bpf.ko is present in the path before loading it. Two cases to be addressed here, In the development process of test_bpf.c unit testing will be done by developers by using "insmod $SRC_TREE/lib/test_bpf.ko" On the other hand testers run full tests by installing modules on device under test (DUT) and followed by modprobe to insert the modules accordingly. Signed-off-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-02-07Merge branch 'for-linus' into testJens Axboe12-63/+212
* for-linus: block, bfq: add requeue-request hook bcache: fix for data collapse after re-attaching an attached device bcache: return attach error when no cache set exist bcache: set writeback_rate_update_seconds in range [1, 60] seconds bcache: fix for allocator and register thread race bcache: set error_limit correctly bcache: properly set task state in bch_writeback_thread() bcache: fix high CPU occupancy during journal bcache: add journal statistic block: Add should_fail_bio() for bpf error injection blk-wbt: account flush requests correctly
2018-02-07Merge branch 'master' into testJens Axboe1825-25966/+43314
* master: (1190 commits) ASoC: stm32: add of dependency for stm32 drivers ASoC: mt8173-rt5650: fix child-node lookup ASoC: dapm: fix debugfs read using path->connected platform/x86: samsung-laptop: Re-use DEFINE_SHOW_ATTRIBUTE() macro platform/x86: ideapad-laptop: Re-use DEFINE_SHOW_ATTRIBUTE() macro platform/x86: dell-laptop: Re-use DEFINE_SHOW_ATTRIBUTE() macro seq_file: Introduce DEFINE_SHOW_ATTRIBUTE() helper macro Documentation/sysctl/user.txt: fix typo MAINTAINERS: update ARM/QUALCOMM SUPPORT patterns MAINTAINERS: update various PALM patterns MAINTAINERS: update "ARM/OXNAS platform support" patterns MAINTAINERS: update Cortina/Gemini patterns MAINTAINERS: remove ARM/CLKDEV SUPPORT file pattern MAINTAINERS: remove ANDROID ION pattern mm: docs: add blank lines to silence sphinx "Unexpected indentation" errors mm: docs: fix parameter names mismatch mm: docs: fixup punctuation pipe: read buffer limits atomically pipe: simplify round_pipe_size() pipe: reject F_SETPIPE_SZ with size over UINT_MAX ...
2018-02-07Merge tag 'modules-for-v4.16' of ↵Linus Torvalds3-9/+2
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux Pull modules updates from Jessica Yu: "Minor code cleanups and MAINTAINERS update" * tag 'modules-for-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux: modpost: Remove trailing semicolon ftrace/module: Move ftrace_release_mod() to ddebug_cleanup label MAINTAINERS: Remove from module & paravirt maintenance
2018-02-07Merge tag 'iversion-v4.16-2' of ↵Linus Torvalds11-25/+25
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux Pull inode->i_version cleanup from Jeff Layton: "Goffredo went ahead and sent a patch to rename this function, and reverse its sense, as we discussed last week. The patch is very straightforward and I figure it's probably best to go ahead and merge this to get the API as settled as possible" * tag 'iversion-v4.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: iversion: Rename make inode_cmp_iversion{+raw} to inode_eq_iversion{+raw}
2018-02-07Merge branch 'for_linus' of ↵Linus Torvalds2-1/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull UDF and ext2 fixlets from Jan Kara: "A UDF fix and an ext2 cleanup" * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: ext2: drop unneeded newline udf: Sanitize nanoseconds for time stamps
2018-02-08Merge tag 'drm-intel-next-fixes-2018-02-07' of ↵Dave Airlie17-136/+193
git://anongit.freedesktop.org/drm/drm-intel into drm-next Fix for pcode timeouts on BXT and GLK, cmdparser fixes and fixes for new vbt version on CFL and CNL. GVT contains vGPU reset enhancement, which refines vGPU reset flow and the support of virtual aperture read/write when x-no-mmap=on is set in KVM, which is required by a test case from Redhat and also another fix for virtual OpRegion. * tag 'drm-intel-next-fixes-2018-02-07' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915/bios: add DP max link rate to VBT child device struct drm/i915/cnp: Properly handle VBT ddc pin out of bounds. drm/i915/cnp: Ignore VBT request for know invalid DDC pin. drm/i915/cmdparser: Do not check past the cmd length. drm/i915/cmdparser: Check reg_table_count before derefencing. drm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changing drm/i915/gvt: Use KVM r/w to access guest opregion drm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=on drm/i915/gvt: only reset execlist state of one engine during VM engine reset drm/i915/gvt: refine intel_vgpu_submission_ops as per engine ops
2018-02-07block, bfq: add requeue-request hookPaolo Valente1-25/+82
Commit 'a6a252e64914 ("blk-mq-sched: decide how to handle flush rq via RQF_FLUSH_SEQ")' makes all non-flush re-prepared requests for a device be re-inserted into the active I/O scheduler for that device. As a consequence, I/O schedulers may get the same request inserted again, even several times, without a finish_request invoked on that request before each re-insertion. This fact is the cause of the failure reported in [1]. For an I/O scheduler, every re-insertion of the same re-prepared request is equivalent to the insertion of a new request. For schedulers like mq-deadline or kyber, this fact causes no harm. In contrast, it confuses a stateful scheduler like BFQ, which keeps state for an I/O request, until the finish_request hook is invoked on the request. In particular, BFQ may get stuck, waiting forever for the number of request dispatches, of the same request, to be balanced by an equal number of request completions (while there will be one completion for that request). In this state, BFQ may refuse to serve I/O requests from other bfq_queues. The hang reported in [1] then follows. However, the above re-prepared requests undergo a requeue, thus the requeue_request hook of the active elevator is invoked for these requests, if set. This commit then addresses the above issue by properly implementing the hook requeue_request in BFQ. [1] https://marc.info/?l=linux-block&m=151211117608676 Reported-by: Ivan Kozik <ivan@ludios.org> Reported-by: Alban Browaeys <alban.browaeys@gmail.com> Tested-by: Mike Galbraith <efault@gmx.de> Signed-off-by: Paolo Valente <paolo.valente@linaro.org> Signed-off-by: Serena Ziviani <ziviani.serena@gmail.com> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2018-02-07Merge tag 'regulator-fix-v4.16-suspend' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fix from Mark Brown: "Fix suspend to idle. Testing on mainline after the initial regulator pull request went in identified a regression for suspend to idle due to it calling the suspend operations with states that it wasn't realized could happen, this patch fixes the problem" * tag 'regulator-fix-v4.16-suspend' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: Fix suspend to idle
2018-02-07Merge tag 'fbdev-v4.16' of git://github.com/bzolnier/linuxLinus Torvalds21-777/+421
Pull fbdev updates from Bartlomiej Zolnierkiewicz: "There is nothing really major here: - fix display-timings lookup in the Device Tree in atmel_lcdfb driver (Johan Hovold) - fix video mode and line_length to be set correctly in vfb driver (Pieter "PoroCYon" Sluys) - fix returning nonsensical values to the user-space on GIO_FONTX ioctl when using dummy console (Nicolas Pitre) - add missing license tag to mmpfb driver (Arnd Bergmann) - convert radeonfb and pxa3xx_gcu drivers to use ktime_get[_ts64]() instead of the deprecated do_gettimeofday() (Arnd Bergmann) - switch udlfb driver from using the pr_*() logging functions to the dev_*() ones + related cleanups (Ladislav Michl) - use __raw I/O accessors also on arm64 (Ji Zhang) - fix Kconfig help text for intelfb driver (Randy Dunlap) - do not duplicate features data in omapfb driver (Ladislav Michl) - misc cleanups (Colin Ian King, Markus Elfring, Rasmus Villemoes, Vasyl Gomonovych, Himanshu Jha, Michael Trimarchi)" * tag 'fbdev-v4.16' of git://github.com/bzolnier/linux: (25 commits) video: udlfb: Switch from the pr_*() to the dev_*() logging functions video: udlfb: Constify read only data video: fbdev/mmp: add MODULE_LICENSE console/dummy: leave .con_font_get set to NULL fbdev: mxsfb: use framebuffer_alloc in the correct way video: udlfb: Do not name private data 'dev' video: udlfb: Remove noisy warnings video: udlfb: Remove redundant gdev variable video: udlfb: Remove unnecessary local variable fbdev: auo_k190x: Use zeroing memory allocator instead of allocator/memset vfb: fix video mode and line_length being set when loaded fbdev: arm64 use __raw I/O memory api omapfb: dss: Do not duplicate features data video: fbdev: omap2: Use PTR_ERR_OR_ZERO() fbdev: au1200fb: delete duplicate header contents fbdev: pxa3xx: use ktime_get_ts64 for time stamps fbdev: radeon: use ktime_get() for HZ calibration video: smscufx: Improve a size determination in two functions video: udlfb: Delete an unnecessary return statement in two functions video: udlfb: Improve a size determination in dlfb_alloc_urb_list() ...
2018-02-07Merge tag 'platform-drivers-x86-v4.16-2' of ↵Linus Torvalds7-95/+20
git://git.infradead.org/linux-platform-drivers-x86 Pull more x86 platform-drivers updates from Andy Shevchenko: "The DEFINE_SHOW_ATTRIBUTE() macro was defined privately in three locations and is useful for new and old users to avoid a lot of code duplication. Move the macro to seq_file.h. Along with above, clean up three drivers to use that macro. This, due to dependencies, was sent separately since affected changes weren't upstream originally yet. The rationale of doing this now is to allow use of new macro in v4.17 cycle in a conflictless manner" * tag 'platform-drivers-x86-v4.16-2' of git://git.infradead.org/linux-platform-drivers-x86: platform/x86: samsung-laptop: Re-use DEFINE_SHOW_ATTRIBUTE() macro platform/x86: ideapad-laptop: Re-use DEFINE_SHOW_ATTRIBUTE() macro platform/x86: dell-laptop: Re-use DEFINE_SHOW_ATTRIBUTE() macro seq_file: Introduce DEFINE_SHOW_ATTRIBUTE() helper macro
2018-02-07drm/i915/bios: add DP max link rate to VBT child device structJani Nikula2-3/+7
Update VBT defs to reflect revision 216. While at it, default the expected child device struct size to sizeof the size rather than a hardcoded value. v2: Fix bit order (David) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180118153310.32437-1-jani.nikula@intel.com (cherry picked from commit c4fb60b9aba9f939d3f8575df23fd8d5958ec6ed) Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
2018-02-07Merge tag 'asoc-v4.16-5' of ↵Linus Torvalds29-107/+919
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound Pull more ASoC updates from Mark Brown: "With the merge window having been delayed for another week here's another batch of updates that came in during that week. There's a few important fixes in here, mainly a fix for I/O on a number of devices caused by some of the component rework and a fix for a potential issue if more than one component in a link provides compressed operations. The I/O fixes are particularly important as the problem causes a power regression on a number of OMAP platforms" * tag 'asoc-v4.16-5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound: (22 commits) ASoC: stm32: add of dependency for stm32 drivers ASoC: mt8173-rt5650: fix child-node lookup ASoC: dapm: fix debugfs read using path->connected ASoC: compress: Fixup error messages ASoC: compress: Remove some extraneous blank lines ASoC: compress: Correct handling of copy callback ASoC: Intel: kbl: Enable mclk and ssp sclk early ASoC: Intel: Skylake: Add extended I2S config blob support in Clock driver ASoC: Intel: Skylake: Add ssp clock driver ASoC: Fix twl4030 and 6040 regression by adding back read and write ASoC: sun8i-codec: Add ADC support for a33 ASoC: rockchip: Use dummy_dai for rt5514 dsp dailink ASoC: soc-pcm: rename .pmdown_time to .use_pmdown_time for Component ASoC: ak4613: call dummy write for PW_MGMT1/3 when Playback ASoC: soc-pcm: don't call flush_delayed_work() many times in soc_pcm_private_free() ASoC: soc-core: snd_soc_rtdcom_lookup() cares component driver name ASoC: sam9x5_wm8731: Drop 'ASoC' prefix from error messages ASoC: sam9g20_wm8731: use dev_*() logging functions ASoC: max98373 Changed SPDX header in C++ comments style ASoC: dmic: Fix check of return value from read of 'num-channels' ...
2018-02-08Merge branch 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie7-28/+26
into drm-next A few more misc fixes for 4.16. * 'drm-next-4.16' of git://people.freedesktop.org/~agd5f/linux: drm/amdgpu: re-enable CGCG on CZ and disable on ST drm/amdgpu: disable coarse grain clockgating for ST drm/radeon: adjust tested variable drm/amdgpu: remove WARN_ON when VM isn't found v2 drm/amdgpu: fix locking in vega10_ih_prescreen_iv drm/amdgpu: fix another potential cause of VM faults drm/amdgpu: use queue 0 for kiq ring drm/ttm: Fix 'buf' pointer update in ttm_bo_vm_access_kmap() (v2) drm/ttm: fix missing parameter change for ttm_bo_cleanup_refs
2018-02-07Merge tag 'linux-watchdog-4.16-rc1' of ↵Linus Torvalds43-1801/+1711
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - new watchdog device drivers for Realtek RTD1295 and Spreadtrum SC9860 platform - add support for the following devices: jz4780 SoC, AST25xx series SoC and r8a77970 SoC - convert to watchdog framework: i6300esb_wdt, xen_wdt and sp5100_tco - several fixes for watchdog core - remove at32ap700x and obsolete documentation - gpio: Convert to use GPIO descriptors - rename gemini into FTWDT010 as this IP block is generc from Faraday Technology - various clean-ups and small bugfixes - add Guenter Roeck as co-maintainer - change maintainers e-mail address * tag 'linux-watchdog-4.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (74 commits) documentation: watchdog: remove documentation of w83697hf_wdt/w83697ug_wdt documentation: watchdog: remove documentation for ixp2000 documentation: watchdog: remove documentation of at32ap700x_wdt watchdog: remove at32ap700x_wdt watchdog: sp5100_tco: Add support for recent FCH versions watchdog: sp5100-tco: Abort if watchdog is disabled by hardware watchdog: sp5100_tco: Use bit operations watchdog: sp5100_tco: Convert to use watchdog subsystem watchdog: sp5100_tco: Clean up function and variable names watchdog: sp5100_tco: Use dev_ print functions where possible watchdog: sp5100_tco: Match PCI device early watchdog: sp5100_tco: Clean up sp5100_tco_setupdevice watchdog: sp5100_tco: Use standard error codes watchdog: sp5100_tco: Use request_muxed_region where possible watchdog: sp5100_tco: Fix watchdog disable bit watchdog: sp5100_tco: Always use SP5100_IO_PM_{INDEX_REG,DATA_REG} watchdog: core: make sure the watchdog_worker is not deferred watchdog: mt7621: switch to using managed devm_watchdog_register_device() watchdog: mt7621: set WDOG_HW_RUNNING bit when appropriate watchdog: imx2_wdt: restore previous timeout after suspend+resume ...
Powered by cgit, Gruvboxed by Blaster4385.