| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Commit 361104b05684c ("dt-bindings: mfd: Convert da9063 to yaml") converts
da9063.txt to dlg,da9063.yaml and adds a new file pattern in MAINTAINERS.
Unfortunately, the file pattern matches da90*.yaml, but the yaml file is
prefixed with dlg,da90.
Hence, ./scripts/get_maintainer.pl --self-test=patterns complains about a
broken file pattern.
Repair this file pattern in DIALOG SEMICONDUCTOR DRIVERS.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 361104b05684c ("dt-bindings: mfd: Convert da9063 to yaml")
Signed-off-by: Lukas Bulwahn <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Cc: Lee Jones <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
During unmount process of nilfs2, nothing holds nilfs_root structure after
nilfs2 detaches its writer in nilfs_detach_log_writer(). However, since
nilfs_evict_inode() uses nilfs_root for some cleanup operations, it may
cause use-after-free read if inodes are left in "garbage_list" and
released by nilfs_dispose_list() at the end of nilfs_detach_log_writer().
Fix this issue by modifying nilfs_evict_inode() to only clear inode
without additional metadata changes that use nilfs_root if the file system
is degraded to read-only or the writer is detached.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ryusuke Konishi <[email protected]>
Reported-by: [email protected]
Closes: https://lkml.kernel.org/r/[email protected]
Tested-by: Ryusuke Konishi <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
The zswap writeback mechanism can cause a race condition resulting in
memory corruption, where a swapped out page gets swapped in with data that
was written to a different page.
The race unfolds like this:
1. a page with data A and swap offset X is stored in zswap
2. page A is removed off the LRU by zpool driver for writeback in
zswap-shrink work, data for A is mapped by zpool driver
3. user space program faults and invalidates page entry A, offset X is
considered free
4. kswapd stores page B at offset X in zswap (zswap could also be
full, if so, page B would then be IOed to X, then skip step 5.)
5. entry A is replaced by B in tree->rbroot, this doesn't affect the
local reference held by zswap-shrink work
6. zswap-shrink work writes back A at X, and frees zswap entry A
7. swapin of slot X brings A in memory instead of B
The fix:
Once the swap page cache has been allocated (case ZSWAP_SWAPCACHE_NEW),
zswap-shrink work just checks that the local zswap_entry reference is
still the same as the one in the tree. If it's not the same it means that
it's either been invalidated or replaced, in both cases the writeback is
aborted because the local entry contains stale data.
Reproducer:
I originally found this by running `stress` overnight to validate my work
on the zswap writeback mechanism, it manifested after hours on my test
machine. The key to make it happen is having zswap writebacks, so
whatever setup pumps /sys/kernel/debug/zswap/written_back_pages should do
the trick.
In order to reproduce this faster on a vm, I setup a system with ~100M of
available memory and a 500M swap file, then running `stress --vm 1
--vm-bytes 300000000 --vm-stride 4000` makes it happen in matter of tens
of minutes. One can speed things up even more by swinging
/sys/module/zswap/parameters/max_pool_percent up and down between, say, 20
and 1; this makes it reproduce in tens of seconds. It's crucial to set
`--vm-stride` to something other than 4096 otherwise `stress` won't
realize that memory has been corrupted because all pages would have the
same data.
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Domenico Cerasuolo <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Reviewed-by: Chris Li (Google) <[email protected]>
Cc: Dan Streetman <[email protected]>
Cc: Johannes Weiner <[email protected]>
Cc: Minchan Kim <[email protected]>
Cc: Nitin Gupta <[email protected]>
Cc: Seth Jennings <[email protected]>
Cc: Vitaly Wool <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Since commit 1ba3cbf3ec3b ("mm: kfence: improve the performance of
__kfence_alloc() and __kfence_free()"), kfence reports failures in random
places at boot on big endian machines.
The problem is that the new KFENCE_CANARY_PATTERN_U64 encodes the address
of each byte in its value, so it needs to be byte swapped on big endian
machines.
The compiler is smart enough to do the le64_to_cpu() at compile time, so
there is no runtime overhead.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 1ba3cbf3ec3b ("mm: kfence: improve the performance of __kfence_alloc() and __kfence_free()")
Signed-off-by: Michael Ellerman <[email protected]>
Reviewed-by: Alexander Potapenko <[email protected]>
Reviewed-by: Marco Elver <[email protected]>
Cc: Peng Zhang <[email protected]>
Cc: David Laight <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Under memory pressure, we sometimes observe the following crash:
[ 5694.832838] ------------[ cut here ]------------
[ 5694.842093] list_del corruption, ffff888014b6a448->next is LIST_POISON1 (dead000000000100)
[ 5694.858677] WARNING: CPU: 33 PID: 418824 at lib/list_debug.c:47 __list_del_entry_valid+0x42/0x80
[ 5694.961820] CPU: 33 PID: 418824 Comm: fuse_counters.s Kdump: loaded Tainted: G S 5.19.0-0_fbk3_rc3_hoangnhatpzsdynshrv41_10870_g85a9558a25de #1
[ 5694.990194] Hardware name: Wiwynn Twin Lakes MP/Twin Lakes Passive MP, BIOS YMM16 05/24/2021
[ 5695.007072] RIP: 0010:__list_del_entry_valid+0x42/0x80
[ 5695.017351] Code: 08 48 83 c2 22 48 39 d0 74 24 48 8b 10 48 39 f2 75 2c 48 8b 51 08 b0 01 48 39 f2 75 34 c3 48 c7 c7 55 d7 78 82 e8 4e 45 3b 00 <0f> 0b eb 31 48 c7 c7 27 a8 70 82 e8 3e 45 3b 00 0f 0b eb 21 48 c7
[ 5695.054919] RSP: 0018:ffffc90027aef4f0 EFLAGS: 00010246
[ 5695.065366] RAX: 41fe484987275300 RBX: ffff888008988180 RCX: 0000000000000000
[ 5695.079636] RDX: ffff88886006c280 RSI: ffff888860060480 RDI: ffff888860060480
[ 5695.093904] RBP: 0000000000000002 R08: 0000000000000000 R09: ffffc90027aef370
[ 5695.108175] R10: 0000000000000000 R11: ffffffff82fdf1c0 R12: 0000000010000002
[ 5695.122447] R13: ffff888014b6a448 R14: ffff888014b6a420 R15: 00000000138dc240
[ 5695.136717] FS: 00007f23a7d3f740(0000) GS:ffff888860040000(0000) knlGS:0000000000000000
[ 5695.152899] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 5695.164388] CR2: 0000560ceaab6ac0 CR3: 000000001c06c001 CR4: 00000000007706e0
[ 5695.178659] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 5695.192927] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 5695.207197] PKRU: 55555554
[ 5695.212602] Call Trace:
[ 5695.217486] <TASK>
[ 5695.221674] zs_map_object+0x91/0x270
[ 5695.229000] zswap_frontswap_store+0x33d/0x870
[ 5695.237885] ? do_raw_spin_lock+0x5d/0xa0
[ 5695.245899] __frontswap_store+0x51/0xb0
[ 5695.253742] swap_writepage+0x3c/0x60
[ 5695.261063] shrink_page_list+0x738/0x1230
[ 5695.269255] shrink_lruvec+0x5ec/0xcd0
[ 5695.276749] ? shrink_slab+0x187/0x5f0
[ 5695.284240] ? mem_cgroup_iter+0x6e/0x120
[ 5695.292255] shrink_node+0x293/0x7b0
[ 5695.299402] do_try_to_free_pages+0xea/0x550
[ 5695.307940] try_to_free_pages+0x19a/0x490
[ 5695.316126] __folio_alloc+0x19ff/0x3e40
[ 5695.323971] ? __filemap_get_folio+0x8a/0x4e0
[ 5695.332681] ? walk_component+0x2a8/0xb50
[ 5695.340697] ? generic_permission+0xda/0x2a0
[ 5695.349231] ? __filemap_get_folio+0x8a/0x4e0
[ 5695.357940] ? walk_component+0x2a8/0xb50
[ 5695.365955] vma_alloc_folio+0x10e/0x570
[ 5695.373796] ? walk_component+0x52/0xb50
[ 5695.381634] wp_page_copy+0x38c/0xc10
[ 5695.388953] ? filename_lookup+0x378/0xbc0
[ 5695.397140] handle_mm_fault+0x87f/0x1800
[ 5695.405157] do_user_addr_fault+0x1bd/0x570
[ 5695.413520] exc_page_fault+0x5d/0x110
[ 5695.421017] asm_exc_page_fault+0x22/0x30
After some investigation, I have found the following issue: unlike other
zswap backends, zsmalloc performs the LRU list update at the object
mapping time, rather than when the slot for the object is allocated.
This deviation was discussed and agreed upon during the review process
of the zsmalloc writeback patch series:
https://lore.kernel.org/lkml/[email protected]/
Unfortunately, this introduces a subtle bug that occurs when there is a
concurrent store and reclaim, which interleave as follows:
zswap_frontswap_store() shrink_worker()
zs_malloc() zs_zpool_shrink()
spin_lock(&pool->lock) zs_reclaim_page()
zspage = find_get_zspage()
spin_unlock(&pool->lock)
spin_lock(&pool->lock)
zspage = list_first_entry(&pool->lru)
list_del(&zspage->lru)
zspage->lru.next = LIST_POISON1
zspage->lru.prev = LIST_POISON2
spin_unlock(&pool->lock)
zs_map_object()
spin_lock(&pool->lock)
if (!list_empty(&zspage->lru))
list_del(&zspage->lru)
CHECK_DATA_CORRUPTION(next == LIST_POISON1) /* BOOM */
With the current upstream code, this issue rarely happens. zswap only
triggers writeback when the pool is already full, at which point all
further store attempts are short-circuited. This creates an implicit
pseudo-serialization between reclaim and store. I am working on a new
zswap shrinking mechanism, which makes interleaving reclaim and store
more likely, exposing this bug.
zbud and z3fold do not have this problem, because they perform the LRU
list update in the alloc function, while still holding the pool's lock.
This patch fixes the aforementioned bug by moving the LRU update back to
zs_malloc(), analogous to zbud and z3fold.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 64f768c6b32e ("zsmalloc: add a LRU to zs_pool to keep track of zspages in LRU order")
Signed-off-by: Nhat Pham <[email protected]>
Suggested-by: Johannes Weiner <[email protected]>
Acked-by: Johannes Weiner <[email protected]>
Reviewed-by: Sergey Senozhatsky <[email protected]>
Acked-by: Minchan Kim <[email protected]>
Cc: Dan Streetman <[email protected]>
Cc: Nitin Gupta <[email protected]>
Cc: Seth Jennings <[email protected]>
Cc: Vitaly Wool <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
When something registers and unregisters many shrinkers, such as:
for x in $(seq 10000); do unshare -Ui true; done
Sometimes the following error is printed to the kernel log:
debugfs: Directory '...' with parent 'shrinker' already present!
This occurs since commit badc28d4924b ("mm: shrinkers: fix deadlock in
shrinker debugfs") / v6.2: Since the call to `debugfs_remove_recursive`
was moved outside the `shrinker_rwsem`/`shrinker_mutex` lock, but the call
to `ida_free` stayed inside, a newly registered shrinker can be
re-assigned that ID and attempt to create the debugfs directory before the
directory from the previous shrinker has been removed.
The locking changes in commit f95bdb700bc6 ("mm: vmscan: make global slab
shrink lockless") made the race condition more likely, though it existed
before then.
Commit badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs")
could be reverted since the issue is addressed should no longer occur
since the count and scan operations are lockless since commit 20cd1892fcc3
("mm: shrinkers: make count and scan in shrinker debugfs lockless").
However, since this is a contended lock, prefer instead moving `ida_free`
outside the lock to avoid the race.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: badc28d4924b ("mm: shrinkers: fix deadlock in shrinker debugfs")
Signed-off-by: Joan Bruguera Micó <[email protected]>
Cc: Qi Zheng <[email protected]>
Cc: Roman Gushchin <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
Make mas->min and mas->max point to a node range instead of a leaf entry
range. This allows mas to still be usable after mas_empty_area() returns.
Users would get unexpected results from other operations on the maple
state after calling the affected function.
For example, x86 MAP_32BIT mmap() acts as if there is no suitable gap when
there should be one.
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 54a611b60590 ("Maple Tree: add new data structure")
Signed-off-by: Peng Zhang <[email protected]>
Reported-by: "Edgecombe, Rick P" <[email protected]>
Reported-by: Tad <[email protected]>
Reported-by: Michael Keyes <[email protected]>
Link: https://lore.kernel.org/linux-mm/[email protected]/
Link: https://lore.kernel.org/linux-mm/[email protected]/
Reviewed-by: Liam R. Howlett <[email protected]>
Tested-by: Rick Edgecombe <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
|
|
These functions are already marked as NOKPROBE to prevent recursion and
we have the same reason to blacklist them if rethook is used with fprobe,
since they are beyond the recursion-free region ftrace can guard.
Link: https://lore.kernel.org/all/[email protected]/
Fixes: f3a112c0c40d ("x86,rethook,kprobes: Replace kretprobe with rethook on x86")
Signed-off-by: Ze Gao <[email protected]>
Reviewed-by: Steven Rostedt (Google) <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Cc: [email protected]
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
|
|
fprobe_hander and fprobe_kprobe_handler has guarded ftrace recursion
detection but fprobe_exit_handler has not, which possibly introduce
recursive calls if the fprobe exit callback calls any traceable
functions. Checking in fprobe_hander or fprobe_kprobe_handler
is not enough and misses this case.
So add recursion free guard the same way as fprobe_hander. Since
ftrace recursion check does not employ ip(s), so here use entry_ip and
entry_parent_ip the same as fprobe_handler.
Link: https://lore.kernel.org/all/[email protected]/
Fixes: 5b0ab78998e3 ("fprobe: Add exit_handler support")
Signed-off-by: Ze Gao <[email protected]>
Cc: [email protected]
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
|
|
Current implementation calls kprobe related functions before doing
ftrace recursion check in fprobe_kprobe_handler, which opens door
to kernel crash due to stack recursion if preempt_count_{add, sub}
is traceable in kprobe_busy_{begin, end}.
Things goes like this without this patch quoted from Steven:
"
fprobe_kprobe_handler() {
kprobe_busy_begin() {
preempt_disable() {
preempt_count_add() { <-- trace
fprobe_kprobe_handler() {
[ wash, rinse, repeat, CRASH!!! ]
"
By refactoring the common part out of fprobe_kprobe_handler and
fprobe_handler and call ftrace recursion detection at the very beginning,
the whole fprobe_kprobe_handler is free from recursion.
[ Fix the indentation of __fprobe_handler() parameters. ]
Link: https://lore.kernel.org/all/[email protected]/
Fixes: ab51e15d535e ("fprobe: Introduce FPROBE_FL_KPROBE_SHARED flag for fprobe")
Signed-off-by: Ze Gao <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Cc: [email protected]
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
|
|
This patch replaces preempt_{disable, enable} with its corresponding
notrace version in rethook_trampoline_handler so no worries about stack
recursion or overflow introduced by preempt_count_{add, sub} under
fprobe + rethook context.
Link: https://lore.kernel.org/all/[email protected]/
Fixes: 54ecbe6f1ed5 ("rethook: Add a generic return hook")
Signed-off-by: Ze Gao <[email protected]>
Acked-by: Masami Hiramatsu (Google) <[email protected]>
Cc: <[email protected]>
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
|
|
This reverts commit 0920ccdf41e3078a4dd2567eb905ea154bc826e6.
The commit 0920ccdf41e3 ("ARM: dts: stm32: add CAN support on
stm32f746") depends on the patch "dt-bindings: mfd: stm32f7: add
binding definition for CAN3" [1], which is not in net/main, yet. This
results in a parsing error of "stm32f746.dtsi".
So revert this commit.
[1] https://lore.kernel.org/all/[email protected]
Cc: Dario Binacchi <[email protected]>
Cc: Alexandre TORGUE <[email protected]>
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]
Fixes: 0920ccdf41e3 ("ARM: dts: stm32: add CAN support on stm32f746")
Suggested-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Marc Kleine-Budde <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
- sgx test fix for false negatives
- ftrace output is hard to parses and it masks inappropriate skips etc.
This fix addresses the problems by integrating with kselftest runner
* tag 'linux-kselftest-fixes-6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/ftrace: Improve integration with kselftest runner
selftests/sgx: Add "test_encl.elf" to TEST_FILES
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.4, take #1
- Plug a race in the stage-2 mapping code where the IPA and the PA
would end up being out of sync
- Make better use of the bitmap API (bitmap_zero, bitmap_zalloc...)
- FP/SVE/SME documentation update, in the hope that this field
becomes clearer...
- Add workaround for the usual Apple SEIS brokenness
- Random comment fixes
|
|
In cifs_oplock_break function we drop reference to a cfile at
the end of function, due to which close command goes on wire
after lease break acknowledgment even if file is already closed
by application but we had deferred the handle close.
If other client with limited file shareaccess waiting on lease
break ack proceeds operation on that file as soon as first client
sends ack, then we may encounter status sharing violation error
because of open handle.
Solution is to put reference to cfile(send close on wire if last ref)
and then send oplock acknowledgment to server.
Fixes: 9e31678fb403 ("SMB3: fix lease break timeout when multiple deferred close handles for the same file.")
Cc: [email protected]
Signed-off-by: Bharath SM <[email protected]>
Reviewed-by: Shyam Prasad N <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Oplock break may occur for different file handle than the deferred
handle. Check for inode deferred closes list, if it's not empty then
close all the deferred handles of inode because we should not cache
handles if we dont have handle lease.
Eg: If openfilelist has one deferred file handle and another open file
handle from app for a same file, then on a lease break we choose the
first handle in openfile list. The first handle in list can be deferred
handle or actual open file handle from app. In case if it is actual open
handle then today, we don't close deferred handles if we lose handle lease
on a file. Problem with this is, later if app decides to close the existing
open handle then we still be caching deferred handles until deferred close
timeout. Leaving open handle may result in sharing violation when windows
client tries to open a file with limited file share access.
So we should check for deferred list of inode and walk through the list of
deferred files in inode and close all deferred files.
Fixes: 9e31678fb403 ("SMB3: fix lease break timeout when multiple deferred close handles for the same file.")
Cc: [email protected]
Signed-off-by: Bharath SM <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- A collection of minor bug fixes
* tag 'nfsd-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
NFSD: Remove open coding of string copy
SUNRPC: Fix trace_svc_register() call site
SUNRPC: always free ctxt when freeing deferred request
SUNRPC: double free xprt_ctxt while still in use
SUNRPC: Fix error handling in svc_setup_socket()
SUNRPC: Fix encoding of accepted but unsuccessful RPC replies
lockd: define nlm_port_min,max with CONFIG_SYSCTL
nfsd: define exports_proc_ops with CONFIG_PROC_FS
SUNRPC: Avoid relying on crypto API to derive CBC-CTS output IV
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Three bug fixes for recently discovered issues"
* tag 'tpmdd-v6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm/tpm_tis: Disable interrupts for more Lenovo devices
tpm: Prevent hwrng from activating during resume
tpm_tis: Use tpm_chip_{start,stop} decoration inside tpm_tis_resume
|
|
This code was written prior to previous updates to this
logic for other chips. The RSC registers are part of
SMUIO which is an always on block so there is no need
to disable gfxoff. Additionally add the carryover and
preemption checks.
v2: rebase
Reviewed-by: Hawking Zhang <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected] # 6.1.y: 5591a051b86b: drm/amdgpu: refine get gpu clock counter method
Cc: [email protected] # 6.2.y: 5591a051b86b: drm/amdgpu: refine get gpu clock counter method
Cc: [email protected] # 6.3.y: 5591a051b86b: drm/amdgpu: refine get gpu clock counter method
|
|
This function is only used when CONFIG_TRACE_BRANCH_PROFILING is set and
DISABLE_BRANCH_PROFILING is not set, and the declaration is hidden
behind this combination of tests.
But that causes a warning when building with CONFIG_TRACING_BRANCHES,
since that sets DISABLE_BRANCH_PROFILING for the tracing code, and the
declaration is thus hidden:
kernel/trace/trace_branch.c:205:6: error: no previous prototype for 'ftrace_likely_update' [-Werror=missing-prototypes]
Move the declaration out of the #ifdef to avoid the warning.
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Otherwise it is not always obvious if a dt or iommu change is causing us
to fall back to global pgtable.
Signed-off-by: Rob Clark <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/537359/
Link: https://lore.kernel.org/r/[email protected]
|
|
When the special handling of qcom,adreno-smmu was moved into
qcom_smmu_create(), it was overlooked that we didn't have all the
required entries in qcom_smmu_impl_of_match. So we stopped getting
adreno_smmu_priv on sc7180, breaking per-process pgtables.
Fixes: 30b912a03d91 ("iommu/arm-smmu-qcom: Move the qcom,adreno-smmu check into qcom_smmu_create")
Cc: <[email protected]>
Suggested-by: Lepton Wu <[email protected]>
Signed-off-by: Rob Clark <[email protected]>
Reviewed-by: Konrad Dybcio <[email protected]>
Reviewed-by: Dmitry Baryshkov <[email protected]>
Patchwork: https://patchwork.freedesktop.org/patch/537357/
Link: https://lore.kernel.org/r/[email protected]
|
|
These IDs are for AD102, AD103, AD104, AD106, and AD107 gpus with
audio functions that are largely similar to the existing ones.
Tested audio using gnome-settings, over HDMI, DP-SST and DP-MST
connections on AD106 gpu.
Signed-off-by: Nikhil Mahale <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Two functions are defined and used in pcm_oss.c but also optionally
used from io.c, with an optional prototype. If CONFIG_SND_PCM_OSS_PLUGINS
is disabled, this causes a warning as the functions are not static
and have no prototype:
sound/core/oss/pcm_oss.c:1235:19: error: no previous prototype for 'snd_pcm_oss_write3' [-Werror=missing-prototypes]
sound/core/oss/pcm_oss.c:1266:19: error: no previous prototype for 'snd_pcm_oss_read3' [-Werror=missing-prototypes]
Avoid this by making the prototypes unconditional.
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
snd_cs46xx_download_image() was originally called from dsp_spos.c, but
is now local to cs46xx_lib.c. Mark it as 'static' to avoid a warning
about it lacking a declaration, and '__maybe_unused' to avoid a warning
about it being unused when CONFIG_SND_CS46XX_NEW_DSP is disabled:
sound/pci/cs46xx/cs46xx_lib.c:534:5: error: no previous prototype for 'snd_cs46xx_download_image'
Fixes: 89f157d9e6bf ("[ALSA] cs46xx - Fix PM resume")
Signed-off-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
To pick the changes from:
e0bddc19ba9578bc ("x86/mm: Reduce untagged_addr() overhead for systems without LAM")
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/disabled-features.h' differs from latest version at 'arch/x86/include/asm/disabled-features.h'
diff -u tools/arch/x86/include/asm/disabled-features.h arch/x86/include/asm/disabled-features.h
Cc: Adrian Hunter <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
If a userspace application performes a "delete_controller" command
early during the ctrl initialization, the delete operation
may race against the init code and the kernel will crash.
nvme nvme5: Connect command failed: host path error
nvme nvme5: failed to connect queue: 0 ret=880
PF: supervisor write access in kernel mode
PF: error_code(0x0002) - not-present page
blk_mq_quiesce_queue+0x18/0x90
nvme_tcp_delete_ctrl+0x24/0x40 [nvme_tcp]
nvme_do_delete_ctrl+0x7f/0x8b [nvme_core]
nvme_sysfs_delete.cold+0x8/0xd [nvme_core]
kernfs_fop_write_iter+0x124/0x1b0
new_sync_write+0xff/0x190
vfs_write+0x1ef/0x280
Fix the crash by checking the NVME_CTRL_STARTED_ONCE bit;
if it's not set it means that the nvme controller is still
in the process of getting initialized and the kernel
will return an -EBUSY error to userspace.
Set the NVME_CTRL_STARTED_ONCE later in the nvme_start_ctrl()
function, after the controller start operation is completed.
Signed-off-by: Maurizio Lombardi <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
nvme_mpath_remove_disk is called after del_gendisk, at which point a
blk_mark_disk_dead call doesn't make any sense.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Signed-off-by: Keith Busch <[email protected]>
|
|
To pick the changes in this cset:
a03c376ebaf38394 ("x86/arch_prctl: Add AMX feature numbers as ABI constants")
23e5d9ec2bab53c4 ("x86/mm/iommu/sva: Make LAM and SVA mutually exclusive")
2f8794bd087e7958 ("x86/mm: Provide arch_prctl() interface for LAM")
This picks these new prctls in a third range, that was also added to the
tools/perf/trace/beauty/arch_prctl.c beautifier.
$ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/before
$ cp arch/x86/include/uapi/asm/prctl.h tools/arch/x86/include/uapi/asm/prctl.h
$ tools/perf/trace/beauty/x86_arch_prctl.sh > /tmp/after
$ diff -u /tmp/before /tmp/after
@@ -20,3 +20,11 @@
[0x2003 - 0x2001]= "MAP_VDSO_64",
};
+#define x86_arch_prctl_codes_3_offset 0x4001
+static const char *x86_arch_prctl_codes_3[] = {
+ [0x4001 - 0x4001]= "GET_UNTAG_MASK",
+ [0x4002 - 0x4001]= "ENABLE_TAGGED_ADDR",
+ [0x4003 - 0x4001]= "GET_MAX_TAG_BITS",
+ [0x4004 - 0x4001]= "FORCE_TAGGED_SVA",
+};
+
$
With this 'perf trace' can translate those numbers into strings and use
the strings in filter expressions:
# perf trace -e prctl
0.000 ( 0.011 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9c014b7df5) = 0
0.032 ( 0.002 ms): DOM Worker/3722622 prctl(option: SET_NAME, arg2: 0x7f9bb6b51580) = 0
5.452 ( 0.003 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfeb70) = 0
5.468 ( 0.002 ms): StreamT~ns #30/3722623 prctl(option: SET_NAME, arg2: 0x7f9bdbdfea70) = 0
24.494 ( 0.009 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f562a32ae28) = 0
24.540 ( 0.002 ms): IndexedDB #556/3722624 prctl(option: SET_NAME, arg2: 0x7f563c6d4b30) = 0
670.281 ( 0.008 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30805c8) = 0
670.293 ( 0.002 ms): systemd-userwo/3722339 prctl(option: SET_NAME, arg2: 0x564be30800f0) = 0
^C#
This addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/uapi/asm/prctl.h' differs from latest version at 'arch/x86/include/uapi/asm/prctl.h'
diff -u tools/arch/x86/include/uapi/asm/prctl.h arch/x86/include/uapi/asm/prctl.h
Cc: Adrian Hunter <[email protected]>
Cc: Chang S. Bae <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The PRUSS CFG module is represented as a syscon node and is currently
managed by the PRUSS platform driver. Add easy accessor functions to set
GPI mode, MII_RT event enable/disable and XFR (XIN XOUT) enable/disable
to enable the PRUSS Ethernet usecase. These functions reuse the generic
pruss_cfg_update() API function.
Signed-off-by: Suman Anna <[email protected]>
Co-developed-by: Grzegorz Jaszczyk <[email protected]>
Signed-off-by: Grzegorz Jaszczyk <[email protected]>
Signed-off-by: Puranjay Mohan <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
Reviewed-by: Tony Lindgren <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Mathieu Poirier <[email protected]>
Signed-off-by: MD Danish Anwar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
pruss_cfg_get_gpmux()/set_gpmux() APIs
Add two new generic API pruss_cfg_read() and pruss_cfg_update() to
the PRUSS platform driver to read and program respectively a register
within the PRUSS CFG sub-module represented by a syscon driver. These
APIs are internal to PRUSS driver.
Add two new helper functions pruss_cfg_get_gpmux() & pruss_cfg_set_gpmux()
to get and set the GP MUX mode for programming the PRUSS internal wrapper
mux functionality as needed by usecases.
Various useful registers and macros for certain register bit-fields and
their values have also been added.
Signed-off-by: Suman Anna <[email protected]>
Co-developed-by: Grzegorz Jaszczyk <[email protected]>
Signed-off-by: Grzegorz Jaszczyk <[email protected]>
Signed-off-by: Puranjay Mohan <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
Reviewed-by: Tony Lindgren <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Mathieu Poirier <[email protected]>
Signed-off-by: MD Danish Anwar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Add two new API - pruss_request_mem_region() & pruss_release_mem_region(),
to the PRUSS platform driver to allow client drivers to acquire and release
the common memory resources present within a PRU-ICSS subsystem. This
allows the client drivers to directly manipulate the respective memories,
as per their design contract with the associated firmware.
Co-developed-by: Suman Anna <[email protected]>
Signed-off-by: Suman Anna <[email protected]>
Signed-off-by: Andrew F. Davis <[email protected]>
Co-developed-by: Grzegorz Jaszczyk <[email protected]>
Signed-off-by: Grzegorz Jaszczyk <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
Acked-by: Mathieu Poirier <[email protected]>
Reviewed-by: Tony Lindgren <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: MD Danish Anwar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Add two new get and put API, pruss_get() and pruss_put() to the
PRUSS platform driver to allow client drivers to request a handle
to a PRUSS device. This handle will be used by client drivers to
request various operations of the PRUSS platform driver through
additional API that will be added in the following patches.
The pruss_get() function returns the pruss handle corresponding
to a PRUSS device referenced by a PRU remoteproc instance. The
pruss_put() is the complimentary function to pruss_get().
Co-developed-by: Suman Anna <[email protected]>
Signed-off-by: Suman Anna <[email protected]>
Signed-off-by: Tero Kristo <[email protected]>
Co-developed-by: Grzegorz Jaszczyk <[email protected]>
Signed-off-by: Grzegorz Jaszczyk <[email protected]>
Signed-off-by: Puranjay Mohan <[email protected]>
Reviewed-by: Roger Quadros <[email protected]>
Reviewed-by: Tony Lindgren <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Acked-by: Mathieu Poirier <[email protected]>
Signed-off-by: MD Danish Anwar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Allow compile testing of TI PRU-ICSS Subsystem Platform drivers.
This allows for improved build-test coverage.
No functional change intended.
Signed-off-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Rather than casting clk_unregister_mux to an incompatible function
type provide a trivial wrapper with the correct signature for the
use-case.
Reported by clang-16 with W=1:
drivers/soc/ti/pruss.c:158:38: error: cast from 'void (*)(struct clk *)' to 'void (*)(void *)' converts to incompatible function type [-Werror,-Wcast-function-type-strict]
ret = devm_add_action_or_reset(dev, (void(*)(void *))clk_unregister_mux,
No functional change intended.
Compile tested only.
Signed-off-by: Simon Horman <[email protected]>
Reviewed-by: MD Danish Anwar <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Nathan Chancellor <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
Convert platform_get_resource(),devm_ioremap_resource() to a single
call to devm_platform_ioremap_resource(), as this is exactly what this
function does.
Signed-off-by: Yang Li <[email protected]>
Reviewed-by: Dhruva Gole <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Nishanth Menon <[email protected]>
|
|
This is to get the changes from:
68674f94ffc9dddc ("x86: don't use REP_GOOD or ERMS for small memory copies")
20f3337d350c4e1b ("x86: don't use REP_GOOD or ERMS for small memory clearing")
This also make the 'perf bench mem' files stop referring to the erms
versions that gone away with the above patches.
That addresses these perf tools build warning:
Warning: Kernel ABI header at 'tools/arch/x86/lib/memcpy_64.S' differs from latest version at 'arch/x86/lib/memcpy_64.S'
diff -u tools/arch/x86/lib/memcpy_64.S arch/x86/lib/memcpy_64.S
Warning: Kernel ABI header at 'tools/arch/x86/lib/memset_64.S' differs from latest version at 'arch/x86/lib/memset_64.S'
diff -u tools/arch/x86/lib/memset_64.S arch/x86/lib/memset_64.S
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes from:
3d8f61bf8bcd69bc ("x86: KVM: Add common feature flag for AMD's PSFD")
3763bf58029f3459 ("x86/cpufeatures: Redefine synthetic virtual NMI bit as AMD's "real" vNMI")
6449dcb0cac73821 ("x86: CPUID and CR3/CR4 flags for Linear Address Masking")
be8de49bea505e77 ("x86/speculation: Identify processors vulnerable to SMT RSB predictions")
e7862eda309ecfcc ("x86/cpu: Support AMD Automatic IBRS")
faabfcb194a8d068 ("x86/cpu, kvm: Add the SMM_CTL MSR not present feature")
5b909d4ae59aedc7 ("x86/cpu, kvm: Add the Null Selector Clears Base feature")
84168ae786f8a15a ("x86/cpu, kvm: Move X86_FEATURE_LFENCE_RDTSC to its native leaf")
a9dc9ec5a1fafc3d ("x86/cpu, kvm: Add the NO_NESTED_DATA_BP feature")
f8df91e73a6827a4 ("x86/cpufeatures: Add macros for Intel's new fast rep string features")
78335aac6156eada ("x86/cpufeatures: Add Bandwidth Monitoring Event Configuration feature flag")
f334f723a63cfc25 ("x86/cpufeatures: Add Slow Memory Bandwidth Allocation feature flag")
a018d2e3d4b1abc4 ("x86/cpufeatures: Add Architectural PerfMon Extension bit")
This causes these perf files to be rebuilt and brings some X86_FEATURE
that will be used when updating the copies of
tools/arch/x86/lib/mem{cpy,set}_64.S with the kernel sources:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Borislav Petkov (AMD) <[email protected]>
Cc: Kim Phillips <[email protected]>
Cc: Jim Mattson <[email protected]>
Cc: Babu Moger <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Kan Liang <[email protected]>
Cc: Sean Christopherson <[email protected]>
Cc: Dave Hansen <[email protected]>
Cc: Kirill A. Shutemov <[email protected]>
Cc: Paolo Bonzini <[email protected]>
Cc: Tom Lendacky <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
These don't do anything anymore, the only user of the symbol was
VFIO_CCW/AP which already "depends on VFIO" and VFIO itself selects
IOMMU_API.
When this was added VFIO was wrongly doing "depends on IOMMU_API" which
required some contortions like this to ensure IOMMU_API was turned on.
Reviewed-by: Eric Farman <[email protected]>
Signed-off-by: Jason Gunthorpe <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
Commit f1045056c726 ("topology/sysfs: rework book and drawer topology
ifdefery") activates the book and drawer topology, previously activated by
CONFIG_SCHED_{BOOK,DRAWER}, dependent on the existence of certain macro
definitions. Hence, since then, CONFIG_SCHED_{BOOK,DRAWER} have no effect
and any further purpose.
Remove the obsolete configs SCHED_{BOOK,DRAWER}.
Signed-off-by: Lukas Bulwahn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
pahole says:
struct compat_statfs64 {
...
u32 f_spare[4]; /* 68 16 */
/* size: 88, cachelines: 1, members: 12 */
/* padding: 4 */
struct statfs {
...
unsigned int f_spare[4]; /* 68 16 */
/* size: 88, cachelines: 1, members: 12 */
/* padding: 4 */
struct statfs64 {
...
unsigned int f_spare[4]; /* 68 16 */
/* size: 88, cachelines: 1, members: 12 */
/* padding: 4 */
One has to keep the existence of padding in mind when working with
these structs. Grow f_spare arrays to 5 in order to simplify things.
Acked-by: Heiko Carstens <[email protected]>
Signed-off-by: Ilya Leoshkevich <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
s390's struct statfs and struct statfs64 contain padding, which
field-by-field copying does not set. Initialize the respective structs
with zeros before filling them and copying them to userspace, like it's
already done for the compat versions of these structs.
Found by KMSAN.
[[email protected]: fixed typo in patch description]
Acked-by: Heiko Carstens <[email protected]>
Cc: [email protected] # v4.14+
Signed-off-by: Ilya Leoshkevich <[email protected]>
Reviewed-by: Andrew Morton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
Use "a" constraint instead of "d" constraint to pass the state parameter to
the do_sqbs() inline assembly. This prevents that general purpose register
zero is used for the state parameter.
If the compiler would select general purpose register zero this would be
problematic for the used instruction in rsy format: the register used for
the state parameter is a base register. If the base register is general
purpose register zero the contents of the register are unexpectedly ignored
when the instruction is executed.
This only applies to z/VM guests using QIOASSIST with dedicated (pass through)
QDIO-based devices such as FCP [zfcp driver] as well as real OSA or
HiperSockets [qeth driver].
A possible symptom for this case using zfcp is the following repeating kernel
message pattern:
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: qdio: ZFCP on SC <sc> using AI:1 QEBSM:1 PRI:1 TDD:1 SIGA: W
zfcp <devbusid>: A QDIO problem occurred
zfcp <devbusid>: A QDIO problem occurred
Each of the qdio problem message can be accompanied by the following entries
for the affected subchannel <sc> in
/sys/kernel/debug/s390dbf/qdio_error/hex_ascii for zfcp or qeth:
<sc> ccq: 69....
<sc> SQBS ERROR.
Reviewed-by: Benjamin Block <[email protected]>
Cc: Steffen Maier <[email protected]>
Fixes: 8129ee164267 ("[PATCH] s390: qdio V=V pass-through")
Cc: <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Alexander Gordeev <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus
Mika writes:
thunderbolt: Fix for v6.4-rc3
This includes a single fix that fixes an error when resuming from
hibernation if the driver is built into the kernel. This has been in
linux-next with no reported issues.
* tag 'thunderbolt-for-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt:
thunderbolt: Clear registers properly when auto clear isn't in use
|
|
There is no guarantee that rb_prev() will not return NULL in nft_rbtree_gc_elem():
general protection fault, probably for non-canonical address 0xdffffc0000000003: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000018-0x000000000000001f]
nft_add_set_elem+0x14b0/0x2990
nf_tables_newsetelem+0x528/0xb30
Furthermore, there is a possible use-after-free while iterating,
'node' can be free'd so we need to cache the next value to use.
Fixes: c9e6978e2725 ("netfilter: nft_set_rbtree: Switch to node list walk for overlap detection")
Signed-off-by: Florian Westphal <[email protected]>
|
|
nft_trans_FOO objects all share a common nft_trans base structure, but
trailing fields depend on the real object size. Access is only safe after
trans->msg_type check.
Check for rule type first. Found by code inspection.
Fixes: 1a94e38d254b ("netfilter: nf_tables: add NFTA_RULE_ID attribute")
Signed-off-by: Florian Westphal <[email protected]>
|
|
CONFIG_NF_NAT
gcc with W=1 and ! CONFIG_NF_NAT
net/netfilter/nf_conntrack_netlink.c:3463:32: error:
‘exp_nat_nla_policy’ defined but not used [-Werror=unused-const-variable=]
3463 | static const struct nla_policy exp_nat_nla_policy[CTA_EXPECT_NAT_MAX+1] = {
| ^~~~~~~~~~~~~~~~~~
net/netfilter/nf_conntrack_netlink.c:2979:33: error:
‘any_addr’ defined but not used [-Werror=unused-const-variable=]
2979 | static const union nf_inet_addr any_addr;
| ^~~~~~~~
These variables use is controlled by CONFIG_NF_NAT, so should their definitions.
Signed-off-by: Tom Rix <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Florian Westphal <[email protected]>
|
|
When the system attempts to sleep while mtk_t7xx is not ready, the driver
cannot put the device to sleep:
[ 12.472918] mtk_t7xx 0000:57:00.0: [PM] Exiting suspend, modem in invalid state
[ 12.472936] mtk_t7xx 0000:57:00.0: PM: pci_pm_suspend(): t7xx_pci_pm_suspend+0x0/0x20 [mtk_t7xx] returns -14
[ 12.473678] mtk_t7xx 0000:57:00.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x1b0 returns -14
[ 12.473711] mtk_t7xx 0000:57:00.0: PM: failed to suspend async: error -14
[ 12.764776] PM: Some devices failed to suspend, or early wake event detected
Mediatek confirmed the device can take a rather long time to complete
its initialization, so wait for up to 20 seconds until init is done.
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The cited commit added a stray colon to the 'v' option. That makes the
option work incorrectly.
ex:
tools/testing/selftests/net# ./fib_nexthops.sh -v
(should enable verbose mode, instead it shows help text due to missing arg)
Fixes: 5feba4727395 ("selftests: fib_nexthops: Make ping timeout configurable")
Reviewed-by: Ido Schimmel <[email protected]>
Signed-off-by: Benjamin Poirier <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The XPCS expects clause 73 (copper backplane) autoneg to follow the
ethtool autoneg bit. It actually did that until the blamed
commit inaptly replaced state->an_enabled (coming from ethtool) with
phylink_autoneg_inband() (coming from the device tree or struct
phylink_config), as part of an unrelated phylink_pcs API conversion.
Russell King suggests that state->an_enabled from the original code was
just a proxy for the ethtool Autoneg bit, and that the correct way of
restoring the functionality is to check for this bit in the advertising
mask.
Fixes: 11059740e616 ("net: pcs: xpcs: convert to phylink_pcs_ops")
Link: https://lore.kernel.org/netdev/[email protected]/
Suggested-by: Russell King (Oracle) <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|