| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Silently accepting it could result in corruption.
Signed-off-by: Bas Nieuwenhuizen <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Nicholas Kazlauskas <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the compile warnings below:
>> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_hwmgr.c:1743:13: warning: variable 'min' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
>> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/smu7_hwmgr.c:1743:13: warning: variable 'max' is used uninitialized whenever 'if' condition is false [-Wsometimes-uninitialized]
Signed-off-by: Evan Quan <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Fix the warning below:
>> drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/ppatomctrl.c:1234:29: warning: no previous prototype for function 'asic_internal_ss_get_ss_table' [-Wmissing-prototypes]
ATOM_ASIC_INTERNAL_SS_INFO *asic_internal_ss_get_ss_table(void *device)
^
drivers/gpu/drm/amd/amdgpu/../pm/powerplay/hwmgr/ppatomctrl.c:1234:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
ATOM_ASIC_INTERNAL_SS_INFO *asic_internal_ss_get_ss_table(void *device)
^
static
1 warning generated.
Signed-off-by: Evan Quan <[email protected]>
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC host fixes from Ulf Hansson:
- sdhci: Fix performance regression with auto CMD auto select
- sdhci-of-esdhc: Fix initialization for eMMC HS400 mode
- sdhci-of-esdhc: Fix timeout bug for tuning commands
* tag 'mmc-v5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-of-esdhc: make sure delay chain locked for HS400
mmc: sdhci-of-esdhc: set timeout to max before tuning
mmc: sdhci: Use Auto CMD Auto Select only when v4_mode is true
|
|
Pull drm fixes from Dave Airlie:
"A busier rc2 than normal, have larger sets of fixes for amdgpu +
nouveau, along with some i915, docs, core, panel, sun4i, v3d, vc4
fixes.
Nothing spooky though or pumpkin related.
docs:
- kernel doc fixes
core:
- fix shmem helpers dma-buf mmap bug
amdgpu:
- Add new navi1x PCI ID
- GPUVM reserved area fixes
- Misc display fixes
- Fix bad interactions between display code and CONFIG_KGDB
- Fixes for SMU manual fan control and i2c
nouveau:
- endian regression fix for old gpus
- buffer object refcount fix
- uapi start/end alignment fix
- display notifier fix
- display clock checking fixes
i915:
- Fix max memory region size calculation
- Restore ILK-M RPS support, restoring performance
- Reject 90/270 degreerotated initial fbs
panel:
- mantix reset fixes
sun4i:
- scalar fix
vc4:
- hdmi audio fixes
v3d:
- fix double free"
* tag 'drm-fixes-2020-10-30-1' of git://anongit.freedesktop.org/drm/drm: (42 commits)
drm/nouveau/kms/nv50-: Fix clock checking algorithm in nv50_dp_mode_valid()
drm/nouveau/kms/nv50-: Get rid of bogus nouveau_conn_mode_valid()
drm/nouveau/device: fix changing endianess code to work on older GPUs
drm/nouveau/gem: fix "refcount_t: underflow; use-after-free"
drm/nouveau/kms/nv50-: Program notifier offset before requesting disp caps
drm/nouveau/nouveau: fix the start/end range for migration
drm/i915: Reject 90/270 degree rotated initial fbs
drm/i915: Restore ILK-M RPS support
drm/i915/region: fix max size calculation
drm/vc4: Rework the structure conversion functions
drm/vc4: hdmi: Add a name to the codec DAI component
drm/shme-helpers: Fix dma_buf_mmap forwarding bug
drm/vc4: hdmi: Avoid sleeping in atomic context
drm/amdgpu/pm: fix the fan speed in fan1_input in manual mode for navi1x
drm/amd/pm: fix the wrong fan speed in fan1_input
drm/amdgpu/swsmu: drop smu i2c bus on navi1x
drm/vc4: drv: Add error handding for bind
drm: drm_print.h: fix kernel-doc markups
drm: kernel-doc: drm_dp_helper.h: fix a typo
drm: kernel-doc: add description for a new function parameter
...
|
|
The newly introduced kvm_msr_ignored_check() tries to print error or
debug messages via vcpu_*() macros, but those may cause Oops when NULL
vcpu is passed for KVM_GET_MSRS ioctl.
Fix it by replacing the print calls with kvm_*() macros.
(Note that this will leave vcpu argument completely unused in the
function, but I didn't touch it to make the fix as small as
possible. A clean up may be applied later.)
Fixes: 12bc2132b15e ("KVM: X86: Do the same ignore_msrs check for feature msrs")
BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1178280
Cc: <[email protected]>
Signed-off-by: Takashi Iwai <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Even though the compiler is able to replace static const variables with
their value, it will warn about them being unused when Linux is built with W=1.
Use good old macros instead, this is not C++.
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 5.10, take #1
- Force PTE mapping on device pages provided via VFIO
- Fix detection of cacheable mapping at S2
- Fallback to PMD/PTE mappings for composite huge pages
- Fix accounting of Stage-2 PGD allocation
- Fix AArch32 handling of some of the debug registers
- Simplify host HYP entry
- Fix stray pointer conversion on nVHE TLB invalidation
- Fix initialization of the nVHE code
- Simplify handling of capabilities exposed to HYP
- Nuke VCPUs caught using a forbidden AArch32 EL0
|
|
Since commit d7157ff49a5b ("mtd: rawnand: Use the ECC framework user
input parsing bits"), ECC are broken in FMC2 driver in case of
nand-ecc-step-size and nand-ecc-strength are not set in the device tree.
To avoid this issue, the default settings are now set in
stm32_fmc2_nfc_attach_chip function.
Signed-off-by: Christophe Kerello <[email protected]>
Fixes: d7157ff49a5b ("mtd: rawnand: Use the ECC framework user input parsing bits")
Signed-off-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/linux-mtd/[email protected]
|
|
Commit 0366f7e06a6b ("net: stmmac: add ethtool support for get/set
channels") refactored channel initialization, but during that operation,
the spinlock initialization got lost. Fix this. This fixes the following
lockdep warning:
meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
INFO: trying to register non-static key.
the code is fine but needs lockdep annotation.
turning off the locking correctness validator.
CPU: 1 PID: 331 Comm: kworker/1:2H Not tainted 5.9.0-rc3+ #1858
Hardware name: Hardkernel ODROID-N2 (DT)
Workqueue: kblockd blk_mq_run_work_fn
Call trace:
dump_backtrace+0x0/0x1d0
show_stack+0x14/0x20
dump_stack+0xe8/0x154
register_lock_class+0x58c/0x590
__lock_acquire+0x7c/0x1790
lock_acquire+0xf4/0x440
_raw_spin_lock_irqsave+0x80/0xb0
stmmac_tx_timer+0x4c/0xb0 [stmmac]
call_timer_fn+0xc4/0x3e8
run_timer_softirq+0x2b8/0x6c0
efi_header_end+0x114/0x5f8
irq_exit+0x104/0x110
__handle_domain_irq+0x60/0xb8
gic_handle_irq+0x58/0xb0
el1_irq+0xbc/0x180
_raw_spin_unlock_irqrestore+0x48/0x90
mmc_blk_rw_wait+0x70/0x160
mmc_blk_mq_issue_rq+0x510/0x830
mmc_mq_queue_rq+0x13c/0x278
blk_mq_dispatch_rq_list+0x2a0/0x698
__blk_mq_do_dispatch_sched+0x254/0x288
__blk_mq_sched_dispatch_requests+0x190/0x1d8
blk_mq_sched_dispatch_requests+0x34/0x70
__blk_mq_run_hw_queue+0xcc/0x148
blk_mq_run_work_fn+0x20/0x28
process_one_work+0x2a8/0x718
worker_thread+0x48/0x460
kthread+0x134/0x160
ret_from_fork+0x10/0x1c
Fixes: 0366f7e06a6b ("net: stmmac: add ethtool support for get/set channels")
Signed-off-by: Marek Szyprowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The commit "stmmac: intel: Adding ref clock 1us tic for LPI cntr"
introduced a regression which leads to the kernel panic duing loading
of the dwmac_intel module.
Move the code block after pci resources is obtained.
Fixes: b4c5f83ae3f3 ("stmmac: intel: Adding ref clock 1us tic for LPI cntr")
Cc: Voon Weifeng <[email protected]>
Signed-off-by: Wong Vee Khee <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When PTP timestamping is enabled on Tx, the controller
inserts the Tx timestamp at the beginning of the frame
buffer, between SFD and the L2 frame header. This means
that the skb provided by the stack is required to have
enough headroom otherwise a new skb needs to be created
by the driver to accommodate the timestamp inserted by h/w.
Up until now the driver was relying on the second option,
using skb_realloc_headroom() to create a new skb to accommodate
PTP frames. Turns out that this method is not reliable, as
reallocation of skbs for PTP frames along with the required
overhead (skb_set_owner_w, consume_skb) is causing random
crashes in subsequent skb_*() calls, when multiple concurrent
TCP streams are run at the same time on the same device
(as seen in James' report).
Note that these crashes don't occur with a single TCP stream,
nor with multiple concurrent UDP streams, but only when multiple
TCP streams are run concurrently with the PTP packet flow
(doing skb reallocation).
This patch enforces the first method, by requesting enough
headroom from the stack to accommodate PTP frames, and so avoiding
skb_realloc_headroom() & co, and the crashes no longer occur.
There's no reason not to set needed_headroom to a large enough
value to accommodate PTP frames, so in this regard this patch
is a fix.
Reported-by: James Jurack <[email protected]>
Fixes: bee9e58c9e98 ("gianfar:don't add FCB length to hard_header_len")
Signed-off-by: Claudiu Manoil <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When PTP timestamping is enabled on Tx, the controller
inserts the Tx timestamp at the beginning of the frame
buffer, between SFD and the L2 frame header. This means
that the skb provided by the stack is required to have
enough headroom otherwise a new skb needs to be created
by the driver to accommodate the timestamp inserted by h/w.
Up until now the driver was relying on skb_realloc_headroom()
to create new skbs to accommodate PTP frames. Turns out that
this method is not reliable in this context at least, as
skb_realloc_headroom() for PTP frames can cause random crashes,
mostly in subsequent skb_*() calls, when multiple concurrent
TCP streams are run at the same time with the PTP flow
on the same device (as seen in James' report). I also noticed
that when the system is loaded by sending multiple TCP streams,
the driver receives cloned skbs in large numbers.
skb_cow_head() instead proves to be stable in this scenario,
and not only handles cloned skbs too but it's also more efficient
and widely used in other drivers.
The commit introducing skb_realloc_headroom in the driver
goes back to 2009, commit 93c1285c5d92
("gianfar: reallocate skb when headroom is not enough for fcb").
For practical purposes I'm referencing a newer commit (from 2012)
that brings the code to its current structure (and fixes the PTP
case).
Fixes: 9c4886e5e63b ("gianfar: Fix invalid TX frames returned on error queue when time stamping")
Reported-by: James Jurack <[email protected]>
Suggested-by: Jakub Kicinski <[email protected]>
Signed-off-by: Claudiu Manoil <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Chris reported that commit 24d5a3bffef1 ("lockdep: Fix
usage_traceoverflow") breaks the nr_unused_locks validation code
triggered by /proc/lockdep_stats.
By fully splitting LOCK_USED and LOCK_USED_READ it becomes a bad
indicator for accounting nr_unused_locks; simplyfy by using any first
bit.
Fixes: 24d5a3bffef1 ("lockdep: Fix usage_traceoverflow")
Reported-by: Chris Wilson <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Tested-by: Chris Wilson <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
I initially thought raw_cpu_read() was OK, since if it is !0 we have
IRQs disabled and can't get migrated, so if we get migrated both CPUs
must have 0 and it doesn't matter which 0 we read.
And while that is true; it isn't the whole store, on pretty much all
architectures (except x86) this can result in computing the address for
one CPU, getting migrated, the old CPU continuing execution with another
task (possibly setting recursion) and then the new CPU reading the value
of the old CPU, which is no longer 0.
Similer to:
baffd723e44d ("lockdep: Revert "lockdep: Use raw_cpu_*() for per-cpu variables"")
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
|
|
On a system without uniform support for AArch32 at EL0, it is possible
for the guest to force run AArch32 at EL0 and potentially cause an
illegal exception if running on a core without AArch32. Add an extra
check so that if we catch the guest doing that, then we prevent it from
running again by resetting vcpu->arch.target and return
ARM_EXCEPTION_IL.
We try to catch this misbehaviour as early as possible and not rely on
an illegal exception occuring to signal the problem. Attempting to run a
32bit app in the guest will produce an error from QEMU if the guest
exits while running in AArch32 EL0.
Tested on Juno by instrumenting the host to fake asym aarch32 and
instrumenting KVM to make the asymmetry visible to the guest.
[will: Incorporated feedback from Marc]
Signed-off-by: Qais Yousef <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Cc: James Morse <[email protected]>
Cc: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
* acpi-button:
ACPI: button: Drop no longer necessary Acer SW5-012 lid_init_state quirk
* acpi-dock:
ACPI: dock: fix enum-conversion warning
|
|
* pm-cpuidle:
intel_idle: Fix max_cstate for processor models without C-state tables
* pm-sleep:
PM: sleep: fix typo in kernel/power/process.c
|
|
Some (apparently older) versions of the FEC hardware block do not like
the MMFR register being cleared to avoid generation of MII events at
initialization time. The action of clearing this register results in no
future MII events being generated at all on the problem block. This means
the probing of the MDIO bus will find no PHYs.
Create a quirk that can be checked at the FECs MII init time so that
the right thing is done. The quirk is set as appropriate for the FEC
hardware blocks that are known to need this.
Fixes: f166f890c8f0 ("net: ethernet: fec: Replace interrupt driven MDIO with polled IO")
Signed-off-by: Greg Ungerer <[email protected]>
Acked-by: Fugang Duan <[email protected]>
Tested-by: Andrew Lunn <[email protected]>
Tested-by: Clemens Gruber <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
ip6_tnl_encap assigns to proto transport protocol which
encapsulates inner packet, but we must pass to set_inner_ipproto
protocol of that inner packet.
Calling set_inner_ipproto after ip6_tnl_encap might break gso.
For example, in case of encapsulating ipv6 packet in fou6 packet, inner_ipproto
would be set to IPPROTO_UDP instead of IPPROTO_IPV6. This would lead to
incorrect calling sequence of gso functions:
ipv6_gso_segment -> udp6_ufo_fragment -> skb_udp_tunnel_segment -> udp6_ufo_fragment
instead of:
ipv6_gso_segment -> udp6_ufo_fragment -> skb_udp_tunnel_segment -> ip6ip6_gso_segment
Fixes: 6c11fbf97e69 ("ip6_tunnel: add MPLS transmit support")
Signed-off-by: Alexander Ovechkin <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Mark flush request as IDLE in its .end_io(), aligning it with how normal
requests behave. The flush request stays in in-flight tags if we're not
using an IO scheduler, so we need to change its state into IDLE.
Otherwise, we will hang in blk_mq_tagset_wait_completed_request() during
error recovery because flush the request state is kept as COMPLETED.
Reported-by: Yi Zhang <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Tested-by: Yi Zhang <[email protected]>
Cc: Chao Leng <[email protected]>
Cc: Sagi Grimberg <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
ibx_irq_pre_postinstall() looks totally pointless. We can just
init both SDEIMR and SDEIER at the same time before enabling the
master interrupt. It's equally racy as the other order due
to doing all of this from the postinstall stage with the interrupt
handler already in place. That is, safe with MSI but racy with
shared legacy interrupts. Fortunately we should have MSI on all ilk+.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Lucas De Marchi <[email protected]>
|
|
No reason not to use GEN3_IRQ_INIT() on icp+.
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Let's enable the hardware hpd logic only for the ports we
can actually use.
In theory this may save some miniscule amounts of power,
and more importantly it eliminates a lot if platform specific
codepaths since the generic thing can now deal with any
combination of ports being present on each SKU.
v2: Deal with DG1
v3: Deal with DG1 some more
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Lucas De Marchi <[email protected]>
|
|
We no longer unmask all HPD irqs, so we can drop the ugly per-platform
HPD IIR masking. IMR will prevent unsupported bits from appearing in
IIR.
v2: Deal with DG1
Include "HOTPLUG" in the mask names (Lucas)
v3: Fix typos in subject
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Replace this silly tmp_mask with hotplug_trigger/te_trigger
where appropriate.
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
No reason that I can see why we should enable the hpd detection logic
already during irq postinstall phase. We don't even do this on all
the platforms. We just need it before we actually enable the hotplug
interrupts in .hpd_irq_setup(), and in fact we already do it there as
well. Let's just eliminate the redundant early setup.
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Reviewed-by: Lucas De Marchi <[email protected]>
|
|
No reason to stuff both type-c and tbt into the same function.
Let's split this so we may more easily handle platforms that
lack the tbt spefific bits.
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Move intel_hpd_{enabled,hotplug}_irqs() closes to the beginning of
the file so we can use them in more places. No functional changes.
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Parametrize the icp+ TC HPD bits using hpd_pin rather than
tc_port so it's clear what kind of an animal we're dealing
with.
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use hpd_pin instead of tc_port in the GEN11_{TC,TBT}_HOTPLUG()
to make it clear what they refer to.
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use hpd_pin instead of port in the parametrized ICP+ DDI HPD
macros. Makes it clear what these refer to.
v2: Handle DG1
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Unify the BDW/BXT hotplug bits. BDW only has port A, but that
matches BXT port A so we can shar the same macro for both.
v2: Remember the gvt
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Use hpd_pin to parametrize BXT_DE_PORT_HP_DDI() to make it clear
these have nothing to do with DDI ports or PHYs as such. The only
thing that matters is the HPD pin assignment.
v2: Remember the gvt
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
As with the VBT DVO port, RKL uses PHY based mapping for the
VBT AUX CH. Adjust the code to use the new AUX_USBCn names
and add a comment to explain the situation.
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Let's make the AUX CH names match the spec (AUX A-F for pre-tgl,
AUX A-C or AUX USBC1-6 for tgl+). And while at it let's include
the full encoder name in the AUX CH name as well (as opposed to
just using port_name() which wouldn't give us the right thing on
tgl+).
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Just like with the DDIs tgl+ renamed the AUX CHs to reflect
the type of the DDI. Let's add the aliasing enum values for
the type-C AUX CHs.
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Let's pimp the DDI encoder->name to reflect what the spec calls them.
Ie. on pre-tgl DDI A-F, on tgl+ DDI A-C or DDI TC1-6.
Also since each encoder is really a combination of the DDI and the PHY
we include the PHY name as well.
ICL is a bit special since it already has the two different types
of DDIs (combo or TC) but it still calls them just DDI A-F regarless
of the type. For that let's add an extra "(TC)" note to remind
is which type of DDI it really is.
The code is darn ugly, but not sure there's much we can do about it.
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Since tgl the DDIs have been named A,B,C,TC1,TC2,TC3...
Add the appropriate enum values for the TC DDIs to enum port.
v2: Deal with rkl and dg1
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Make the namespacing for enum tc_port better by adding
the TC_ to the actual enum values.
v2: Drop the extra TC (Lucas)
Reviewed-by: Lucas De Marchi <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://git.linaro.org/people/georgi.djakov/linux into char-misc-linus
Georgi writes:
interconnect fixes for v5.10
This contains one core fix and a few driver fixes.
- Fix the core to perform also aggregation when setting the initial
bandwidth with sync_state.
- Fixes in some drivers to make sure the correct sequence is used for
initialization when we use sync_state.
- Fix in the sdm845 driver to prevent a board hang that was hit when
bandwidth scaling for display and multimedia was enabled.
Signed-off-by: Georgi Djakov <[email protected]>
* tag 'icc-5.10-rc2' of https://git.linaro.org/people/georgi.djakov/linux:
interconnect: qcom: use icc_sync state for sm8[12]50
interconnect: qcom: Ensure that the floor bandwidth value is enforced
interconnect: qcom: sc7180: Init BCMs before creating the nodes
interconnect: qcom: sdm845: Init BCMs before creating the nodes
interconnect: Aggregate before setting initial bandwidth
interconnect: qcom: sdm845: Enable keepalive for the MM1 BCM
|
|
All ABI files are now compatible with ReST format. So, change
the script default to assume that the ABI source files
are compatible with ReST.
Acked-by: Jonathan Corbet <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/4b0af257010570e0e917d82498e42992bec5e173.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The ABI files are supposed to be unique. Yet,
in the specific case of hw_pattern, there are some duplicated
entries as warned by scripts/get_abi.pl:
Warning: /sys/class/leds/<led>/hw_pattern is defined 3 times: Documentation/ABI/testing/sysfs-class-led-trigger-pattern:14 Documentation/ABI/testing/sysfs-class-led-driver-sc27xx:0 Documentation/ABI/testing/sysfs-class-led-driver-el15203000:0
Drop the duplication from the ABI files, moving the specific
definitions to files inside Documentation/leds.
Acked-by: Jonathan Corbet <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/038e57881550550b298e598f8f9b7f20515cbe15.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Both adp8860 and adp8870 define some extensions to the
backlight class. This causes warnings:
Warning: /sys/class/backlight/<backlight>/ambient_light_level is defined 2 times: /sys/class/backlight/<backlight>/ambient_light_level:8 /sys/class/backlight/<backlight>/ambient_light_level:30
Warning: /sys/class/backlight/<backlight>/ambient_light_zone is defined 2 times: /sys/class/backlight/<backlight>/ambient_light_zone:18 /sys/class/backlight/<backlight>/ambient_light_zone:40
As ABI definitions shouldn't be duplicated.
Unfortunately, the ABI is dependent on the specific device
features. As such, ambient_light_level range is somewhat
different among the supported devices.
The ambient_light_zone is even worse: the meanings of each
preset are different, and there's no ABI to retrieve
the supported types nor their meanins. Unfortunately,
it is too late to fix it without causing regressions,
as this has been used since Kernel v2.6.35.
Rewrite those ABI documentation using the current documentation
as a reference, and double-checking at the datasheets:
https://www.analog.com/media/en/technical-documentation/data-sheets/ADP8870.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ADP8860.pdf
in order to properly document the differences between those two
drivers.
Acked-by: Jonathan Corbet <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/342195ad5a819d9bcfcebc133c77ab69b4211672.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
As warned by scripts/get_abi.pl:
Warning: /sys/class/c2port/c2portX/flash_erase is defined 2 times: Documentation/ABI/testing/sysfs-c2port:60 Documentation/ABI/testing/sysfs-c2port:68
This entry was added twice at the same patch. Probalby a
cut-and paste issue.
Fixes: 4e17e1db9647 ("Add c2 port support")
Acked-by: Jonathan Corbet <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/4ea2b31ddc76161fbae004f2f2ed91dfb757703f.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The ABI is not supposed to have duplicated entries, as warned
by get_abi.pl:
$ ./scripts/get_abi.pl validate 2>&1|grep sysfs-class-power
Warning: /sys/class/power_supply/<supply_name>/current_avg is defined 2 times: Documentation/ABI/testing/sysfs-class-power:108 Documentation/ABI/testing/sysfs-class-power:391
Warning: /sys/class/power_supply/<supply_name>/current_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:121 Documentation/ABI/testing/sysfs-class-power:404
Warning: /sys/class/power_supply/<supply_name>/current_now is defined 2 times: Documentation/ABI/testing/sysfs-class-power:130 Documentation/ABI/testing/sysfs-class-power:414
Warning: /sys/class/power_supply/<supply_name>/temp is defined 2 times: Documentation/ABI/testing/sysfs-class-power:281 Documentation/ABI/testing/sysfs-class-power:493
Warning: /sys/class/power_supply/<supply_name>/temp_alert_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:291 Documentation/ABI/testing/sysfs-class-power:505
Warning: /sys/class/power_supply/<supply_name>/temp_alert_min is defined 2 times: Documentation/ABI/testing/sysfs-class-power:306 Documentation/ABI/testing/sysfs-class-power:521
Warning: /sys/class/power_supply/<supply_name>/temp_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:322 Documentation/ABI/testing/sysfs-class-power:537
Warning: /sys/class/power_supply/<supply_name>/temp_min is defined 2 times: Documentation/ABI/testing/sysfs-class-power:333 Documentation/ABI/testing/sysfs-class-power:547
Warning: /sys/class/power_supply/<supply_name>/voltage_max is defined 2 times: Documentation/ABI/testing/sysfs-class-power:356 Documentation/ABI/testing/sysfs-class-power:571
Warning: /sys/class/power_supply/<supply_name>/voltage_min is defined 2 times: Documentation/ABI/testing/sysfs-class-power:367 Documentation/ABI/testing/sysfs-class-power:581
Warning: /sys/class/power_supply/<supply_name>/voltage_now is defined 2 times: Documentation/ABI/testing/sysfs-class-power:378 Documentation/ABI/testing/sysfs-class-power:591
Yet, both USB and Battery share a common set of charging-related
properties.
Unify the entries for such properties in order to avoid
duplication, while preserving the battery and USB-specific
data properly documented.
Acked-by: Jonathan Corbet <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/bcdf5f76326ea48a990a7cac612af216c387537d.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
This ABI is defined twice, one for normal leds and another
one for multicolor ones.
Ensure that just one definition is there at ABI.
Acked-by: Pavel Machek <[email protected]>
Acked-by: Jonathan Corbet <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/1115022e7f172b19ee8610f2ad28cc2f0ca93592.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Perhaps due to a wrong cut-and-paste, this entry:
What: /sys/bus/vmbus/devices/<UUID>/channels/<N>/cpu
was added twice by the same patch, one following the other.
Remove the duplication.
Fixes: c2e5df616e1a ("vmbus: add per-channel sysfs info")
Acked-by: Wei Liu <[email protected]>
Acked-by: Jonathan Corbet <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/091e8de5543c280ceb47edcb3ab6d0e9f3fa085b.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
Unfortunately, (R) and (W) are valid markups for enumerated
lists, as described at:
https://docutils.sourceforge.io/docs/ref/rst/restructuredtext.html#enumerated-lists
So, we ned to replace them by:
(R) -> (Read)
(W) -> (Write)
As otherwise, (R) will be displayed as R., with is not what
it is desired.
There's no need to touch (RO) and (RW).
Acked-by: Jonathan Corbet <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/6e81ad8064f3ed4f8dc265086fdf1c618043f935.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
There are some ABI documents that, while they don't generate
any warnings, they have issues when parsed by get_abi.pl script
on its output result.
Address them, in order to provide a clean output.
Reviewed-by: Tom Rix <[email protected]> # for fpga-manager
Reviewed-By: Kajol Jain<[email protected]> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7
Acked-by: Jonathan Cameron <[email protected]> #for IIO
Acked-by: Oded Gabbay <[email protected]> # for Habanalabs
Acked-by: Vaibhav Jain <[email protected]> # for sysfs-bus-papr-pmem
Acked-by: Cezary Rojewski <[email protected]> # for catpt
Acked-by: Suzuki K Poulose <[email protected]>
Acked-by: Ilya Dryomov <[email protected]> # for rbd
Acked-by: Jonathan Corbet <[email protected]>
Signed-off-by: Mauro Carvalho Chehab <[email protected]>
Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|