aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-11-04drm/amdgpu: enable GFXOFF for dimgrey_cavefishTao Zhou2-0/+2
GFXOFF has been supported by PMFW, enable it directly in driver for dimgrey_cavefish. Signed-off-by: Tao Zhou <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: resolved ASD loading issue on siennaJohn Clements1-0/+1
updated fw header v2 parser to set asd fw memory Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: John Clements <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: Enable FGCG for VangoghJinzhou.Su1-0/+1
Add flags AMD_CG_SUPPORT_GFX_FGCG for Vangogh Signed-off-by: Jinzhou.Su <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: Add Fine Grain Clock Gating for GFX10Jinzhou.Su1-0/+45
1. Add FGCG for gfx10 2. Get FGCG status for pm info debugfs Signed-off-by: Jinzhou.Su <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: Add GFX Fine Grain Clock Gating flagJinzhou.Su2-0/+2
Add AMD_CG_SUPPORT_GFX_FGCG for FGCG Signed-off-by: Jinzhou.Su <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04risc-v: kernel: ftrace: Fixes improper SPDX comment styleRyan Kosta1-1/+1
Signed-off-by: Ryan Kosta <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-11-04USB: serial: option: add Telit FN980 composition 0x1055Daniele Palmas1-0/+2
Add the following Telit FN980 composition: 0x1055: tty, adb, tty, tty, tty, tty Signed-off-by: Daniele Palmas <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2020-11-04ceph: check session state after bumping session->s_seqJeff Layton5-18/+39
Some messages sent by the MDS entail a session sequence number increment, and the MDS will drop certain types of requests on the floor when the sequence numbers don't match. In particular, a REQUEST_CLOSE message can cross with one of the sequence morphing messages from the MDS which can cause the client to stall, waiting for a response that will never come. Originally, this meant an up to 5s delay before the recurring workqueue job kicked in and resent the request, but a recent change made it so that the client would never resend, causing a 60s stall unmounting and sometimes a blockisting event. Add a new helper for incrementing the session sequence and then testing to see whether a REQUEST_CLOSE needs to be resent, and move the handling of CEPH_MDS_SESSION_CLOSING into that function. Change all of the bare sequence counter increments to use the new helper. Reorganize check_session_state with a switch statement. It should no longer be called when the session is CLOSING, so throw a warning if it ever is (but still handle that case sanely). [ idryomov: whitespace, pr_err() call fixup ] URL: https://tracker.ceph.com/issues/47563 Fixes: fa9967734227 ("ceph: fix potential mdsc use-after-free crash") Reported-by: Patrick Donnelly <[email protected]> Signed-off-by: Jeff Layton <[email protected]> Reviewed-by: Ilya Dryomov <[email protected]> Reviewed-by: Xiubo Li <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2020-11-04PCI: mvebu: Fix duplicate resource requestsRob Herring1-13/+10
With commit 669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()"), the DT 'ranges' is parsed and populated into resources when the host bridge is allocated. The resources are requested as well, but that happens a second time for the mvebu driver in mvebu_pcie_parse_request_resources(). We should only be requesting the additional resources added in mvebu_pcie_parse_request_resources(). These are not added by default because they use custom properties rather than standard DT address translation. Also, the bus ranges was also populated by default, so we can remove it from mvebu_pci_host_probe(). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=209729 Fixes: 669cbc708122 ("PCI: Move DT resource setup into devm_pci_alloc_host_bridge()") Link: https://lore.kernel.org/r/[email protected] Reported-by: [email protected] Tested-by: Jan Kundrát <[email protected]> Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Lorenzo Pieralisi <[email protected]> Cc: Thomas Petazzoni <[email protected]> Cc: Jason Cooper <[email protected]> Cc: Russell King <[email protected]>
2020-11-04PCI: dwc: Restore ATU memory resource setup to use last entryRob Herring1-2/+6
Prior to commit 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources"), the DWC driver was setting up the last memory resource rather than the first memory resource. This doesn't matter for most platforms which only have 1 memory resource, but it broke Tegra194 which has a 2nd (prefetchable) memory region that requires an ATU entry. The first region on Tegra194 relies on the default 1:1 pass-thru of outbound transactions and doesn't need an ATU entry. Fixes: 0f71c60ffd26 ("PCI: dwc: Remove storing of PCI resources") Link: https://lore.kernel.org/r/[email protected] Reported-by: Vidya Sagar <[email protected]> Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Lorenzo Pieralisi <[email protected]> Acked-by: Jingoo Han <[email protected]> Cc: Gustavo Pimentel <[email protected]>
2020-11-04Merge tag 'linux-can-fixes-for-5.10-20201103' of ↵Jakub Kicinski19-200/+387
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2020-11-03 The first two patches are by Oleksij Rempel and they add a generic can-controller Device Tree yaml binding and convert the text based binding of the flexcan driver to a yaml based binding. Zhang Changzhong's patch fixes a remove_proc_entry warning in the AF_CAN core. A patch by me fixes a kfree_skb() call from IRQ context in the rx-offload helper. Vincent Mailhol contributes a patch to prevent a call to kfree_skb() in hard IRQ context in can_get_echo_skb(). Oliver Hartkopp's patch fixes the length calculation for RTR CAN frames in the __can_get_echo_skb() helper. Oleksij Rempel's patch fixes a use-after-free that shows up with j1939 in can_create_echo_skb(). Yegor Yefremov contributes 4 patches to enhance the j1939 documentation. Zhang Changzhong's patch fixes a hanging task problem in j1939_sk_bind() if the netdev is down. Then there are three patches for the newly added CAN_ISOTP protocol. Geert Uytterhoeven enhances the kconfig help text. Oliver Hartkopp's patch adds missing RX timeout handling in listen-only mode and Colin Ian King's patch decreases the generated object code by 926 bytes. Zhang Changzhong contributes a patch for the ti_hecc driver that fixes the error path in the probe function. Navid Emamdoost's patch for the xilinx_can driver fixes the error handling in case of failing pm_runtime_get_sync(). There are two patches for the peak_usb driver. Dan Carpenter adds range checking in decode operations and Stephane Grosjean's patch fixes a timestamp wrapping problem. Stephane Grosjean's patch for th peak_canfd driver fixes echo management if loopback is on. The next three patches all target the mcp251xfd driver. The first one is by me and it increased the severity of CRC read error messages. The kernel test robot removes an unneeded semicolon and Tom Rix removes unneeded break in several switch-cases. The last 4 patches are by Joakim Zhang and target the flexcan driver, the first three fix ECC related device specific quirks for the LS1021A, LX2160A and the VF610 SoC. The last patch disable wakeup completely upon driver remove. * tag 'linux-can-fixes-for-5.10-20201103' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can: (27 commits) can: flexcan: flexcan_remove(): disable wakeup completely can: flexcan: add ECC initialization for VF610 can: flexcan: add ECC initialization for LX2160A can: flexcan: remove FLEXCAN_QUIRK_DISABLE_MECR quirk for LS1021A can: mcp251xfd: remove unneeded break can: mcp251xfd: mcp251xfd_regmap_nocrc_read(): fix semicolon.cocci warnings can: mcp251xfd: mcp251xfd_regmap_crc_read(): increase severity of CRC read error messages can: peak_canfd: pucan_handle_can_rx(): fix echo management when loopback is on can: peak_usb: peak_usb_get_ts_time(): fix timestamp wrapping can: peak_usb: add range checking in decode operations can: xilinx_can: handle failure cases of pm_runtime_get_sync can: ti_hecc: ti_hecc_probe(): add missed clk_disable_unprepare() in error path can: isotp: padlen(): make const array static, makes object smaller can: isotp: isotp_rcv_cf(): enable RX timeout handling in listen-only mode can: isotp: Explain PDU in CAN_ISOTP help text can: j1939: j1939_sk_bind(): return failure if netdev is down can: j1939: use backquotes for code samples can: j1939: swap addr and pgn in the send example can: j1939: fix syntax and spelling can: j1939: rename jacd tool ... ==================== Link: https://lore.kernel.org/r/<[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-04spi: fsl-dspi: fix wrong pointer in suspend/resumeZhao Qiang1-6/+4
Since commit 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path"), this driver causes a "NULL pointer dereference" in dspi_suspend/resume. This is because since this commit, the drivers private data point to "dspi" instead of "ctlr", the codes in suspend and resume func were not modified correspondly. Fixes: 530b5affc675 ("spi: fsl-dspi: fix use-after-free in remove path") Signed-off-by: Zhao Qiang <[email protected]> Reviewed-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-11-04ASoC: mchp-spdiftx: Do not set Validity bit(s)Codrin Ciubotariu1-1/+0
The Validity bits (bit 28) must not be set in order to have the samples valid. Some controllers look for this bit and ignore the samples if it is set. Fixes: 06ca24e98e6b ("ASoC: mchp-spdiftx: add driver for S/PDIF TX Controller") Signed-off-by: Codrin Ciubotariu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2020-11-04io_uring: fix overflowed cancel w/ linked ->filesPavel Begunkov1-22/+21
Current io_match_files() check in io_cqring_overflow_flush() is useless because requests drop ->files before going to the overflow list, however linked to it request do not, and we don't check them. Signed-off-by: Pavel Begunkov <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-11-04io_uring: drop req/tctx io_identity separatelyJens Axboe1-3/+6
We can't bundle this into one operation, as the identity may not have originated from the tctx to begin with. Drop one ref for each of them separately, if they don't match the static assignment. If we don't, then if the identity is a lookup from registered credentials, we could be freeing that identity as we're dropping a reference assuming it came from the tctx. syzbot reports this as a use-after-free, as the identity is still referencable from idr lookup: ================================================================== BUG: KASAN: use-after-free in instrument_atomic_read_write include/linux/instrumented.h:101 [inline] BUG: KASAN: use-after-free in atomic_fetch_add_relaxed include/asm-generic/atomic-instrumented.h:142 [inline] BUG: KASAN: use-after-free in __refcount_add include/linux/refcount.h:193 [inline] BUG: KASAN: use-after-free in __refcount_inc include/linux/refcount.h:250 [inline] BUG: KASAN: use-after-free in refcount_inc include/linux/refcount.h:267 [inline] BUG: KASAN: use-after-free in io_init_req fs/io_uring.c:6700 [inline] BUG: KASAN: use-after-free in io_submit_sqes+0x15a9/0x25f0 fs/io_uring.c:6774 Write of size 4 at addr ffff888011e08e48 by task syz-executor165/8487 CPU: 1 PID: 8487 Comm: syz-executor165 Not tainted 5.10.0-rc1-next-20201102-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x107/0x163 lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x4c8 mm/kasan/report.c:385 __kasan_report mm/kasan/report.c:545 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:562 check_memory_region_inline mm/kasan/generic.c:186 [inline] check_memory_region+0x13d/0x180 mm/kasan/generic.c:192 instrument_atomic_read_write include/linux/instrumented.h:101 [inline] atomic_fetch_add_relaxed include/asm-generic/atomic-instrumented.h:142 [inline] __refcount_add include/linux/refcount.h:193 [inline] __refcount_inc include/linux/refcount.h:250 [inline] refcount_inc include/linux/refcount.h:267 [inline] io_init_req fs/io_uring.c:6700 [inline] io_submit_sqes+0x15a9/0x25f0 fs/io_uring.c:6774 __do_sys_io_uring_enter+0xc8e/0x1b50 fs/io_uring.c:9159 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x440e19 Code: 18 89 d0 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 eb 0f fc ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007fff644ff178 EFLAGS: 00000246 ORIG_RAX: 00000000000001aa RAX: ffffffffffffffda RBX: 0000000000000005 RCX: 0000000000440e19 RDX: 0000000000000000 RSI: 000000000000450c RDI: 0000000000000003 RBP: 0000000000000004 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000022b4850 R13: 0000000000000010 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 8487: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:461 kmalloc include/linux/slab.h:552 [inline] io_register_personality fs/io_uring.c:9638 [inline] __io_uring_register fs/io_uring.c:9874 [inline] __do_sys_io_uring_register+0x10f0/0x40a0 fs/io_uring.c:9924 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 8487: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0x102/0x140 mm/kasan/common.c:422 slab_free_hook mm/slub.c:1544 [inline] slab_free_freelist_hook+0x5d/0x150 mm/slub.c:1577 slab_free mm/slub.c:3140 [inline] kfree+0xdb/0x360 mm/slub.c:4122 io_identity_cow fs/io_uring.c:1380 [inline] io_prep_async_work+0x903/0xbc0 fs/io_uring.c:1492 io_prep_async_link fs/io_uring.c:1505 [inline] io_req_defer fs/io_uring.c:5999 [inline] io_queue_sqe+0x212/0xed0 fs/io_uring.c:6448 io_submit_sqe fs/io_uring.c:6542 [inline] io_submit_sqes+0x14f6/0x25f0 fs/io_uring.c:6784 __do_sys_io_uring_enter+0xc8e/0x1b50 fs/io_uring.c:9159 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff888011e08e00 which belongs to the cache kmalloc-96 of size 96 The buggy address is located 72 bytes inside of 96-byte region [ffff888011e08e00, ffff888011e08e60) The buggy address belongs to the page: page:00000000a7104751 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x11e08 flags: 0xfff00000000200(slab) raw: 00fff00000000200 ffffea00004f8540 0000001f00000002 ffff888010041780 raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888011e08d00: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc ffff888011e08d80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc > ffff888011e08e00: fa fb fb fb fb fb fb fb fb fb fb fb fc fc fc fc ^ ffff888011e08e80: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc ffff888011e08f00: 00 00 00 00 00 00 00 00 00 00 00 00 fc fc fc fc ================================================================== Reported-by: [email protected] Fixes: 1e6fa5216a0e ("io_uring: COW io_identity on mismatch") Signed-off-by: Jens Axboe <[email protected]>
2020-11-04io_uring: ensure consistent view of original task ->mm from SQPOLLJens Axboe1-7/+20
Ensure we get a valid view of the task mm, by using task_lock() when attempting to grab the original task mm. Reported-by: [email protected] Fixes: 2aede0e417db ("io_uring: stash ctx task reference for SQPOLL") Signed-off-by: Jens Axboe <[email protected]>
2020-11-04io_uring: properly handle SQPOLL request cancelationsJens Axboe2-13/+67
Track if a given task io_uring context contains SQPOLL instances, so we can iterate those for cancelation (and request counts). This ensures that we properly wait on SQPOLL contexts, and find everything that needs canceling. Signed-off-by: Jens Axboe <[email protected]>
2020-11-04io-wq: cancel request if it's asking for files and we don't have themJens Axboe1-0/+4
This can't currently happen, but will be possible shortly. Handle missing files just like we do not being able to grab a needed mm, and mark the request as needing cancelation. Signed-off-by: Jens Axboe <[email protected]>
2020-11-04entry: Fix the incorrect ordering of lockdep and RCU checkThomas Gleixner1-2/+2
When an exception/interrupt hits kernel space and the kernel is not currently in the idle task then RCU must be watching. irqentry_enter() validates this via rcu_irq_enter_check_tick(), which in turn invokes lockdep when taking a lock. But at that point lockdep does not yet know about the fact that interrupts have been disabled by the CPU, which triggers a lockdep splat complaining about inconsistent state. Invoking trace_hardirqs_off() before rcu_irq_enter_check_tick() defeats the point of rcu_irq_enter_check_tick() because trace_hardirqs_off() uses RCU. So use the same sequence as for the idle case and tell lockdep about the irq state change first, invoke the RCU check and then do the lockdep and tracer update. Fixes: a5497bab5f72 ("entry: Provide generic interrupt entry/exit code") Reported-by: Mark Rutland <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Mark Rutland <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected]
2020-11-04xfs: fix scrub flagging rtinherit even if there is no rt deviceDarrick J. Wong1-2/+1
The kernel has always allowed directories to have the rtinherit flag set, even if there is no rt device, so this check is wrong. Fixes: 80e4e1268802 ("xfs: scrub inodes") Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2020-11-04xfs: fix missing CoW blocks writeback conversion retryDarrick J. Wong1-2/+4
In commit 7588cbeec6df, we tried to fix a race stemming from the lack of coordination between higher level code that wants to allocate and remap CoW fork extents into the data fork. Christoph cites as examples the always_cow mode, and a directio write completion racing with writeback. According to the comments before the goto retry, we want to restart the lookup to catch the extent in the data fork, but we don't actually reset whichfork or cow_fsb, which means the second try executes using stale information. Up until now I think we've gotten lucky that either there's something left in the CoW fork to cause cow_fsb to be reset, or either data/cow fork sequence numbers have advanced enough to force a fresh lookup from the data fork. However, if we reach the retry with an empty stable CoW fork and a stable data fork, neither of those things happens. The retry foolishly re-calls xfs_convert_blocks on the CoW fork which fails again. This time, we toss the write. I've recently been working on extending reflink to the realtime device. When the realtime extent size is larger than a single block, we have to force the page cache to CoW the entire rt extent if a write (or fallocate) are not aligned with the rt extent size. The strategy I've chosen to deal with this is derived from Dave's blocksize > pagesize series: dirtying around the write range, and ensuring that writeback always starts mapping on an rt extent boundary. This has brought this race front and center, since generic/522 blows up immediately. However, I'm pretty sure this is a bug outright, independent of that. Fixes: 7588cbeec6df ("xfs: retry COW fork delalloc conversion when no extent was found") Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2020-11-04iomap: clean up writeback state logic on writepage errorBrian Foster1-13/+2
The iomap writepage error handling logic is a mash of old and slightly broken XFS writepage logic. When keepwrite writeback state tracking was introduced in XFS in commit 0d085a529b42 ("xfs: ensure WB_SYNC_ALL writeback handles partial pages correctly"), XFS had an additional cluster writeback context that scanned ahead of ->writepage() to process dirty pages over the current ->writepage() extent mapping. This context expected a dirty page and required retention of the TOWRITE tag on partial page processing so the higher level writeback context would revisit the page (in contrast to ->writepage(), which passes a page with the dirty bit already cleared). The cluster writeback mechanism was eventually removed and some of the error handling logic folded into the primary writeback path in commit 150d5be09ce4 ("xfs: remove xfs_cancel_ioend"). This patch accidentally conflated the two contexts by using the keepwrite logic in ->writepage() without accounting for the fact that the page is not dirty. Further, the keepwrite logic has no practical effect on the core ->writepage() caller (write_cache_pages()) because it never revisits a page in the current function invocation. Technically, the page should be redirtied for the keepwrite logic to have any effect. Otherwise, write_cache_pages() may find the tagged page but will skip it since it is clean. Even if the page was redirtied, however, there is still no practical effect to keepwrite since write_cache_pages() does not wrap around within a single invocation of the function. Therefore, the dirty page would simply end up retagged on the next writeback sequence over the associated range. All that being said, none of this really matters because redirtying a partially processed page introduces a potential infinite redirty -> writeback failure loop that deviates from the current design principle of clearing the dirty state on writepage failure to avoid building up too much dirty, unreclaimable memory on the system. Therefore, drop the spurious keepwrite usage and dirty state clearing logic from iomap_writepage_map(), treat the partially processed page the same as a fully processed page, and let the imminent ioend failure clean up the writeback state. Signed-off-by: Brian Foster <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2020-11-04iomap: support partial page discard on writeback block mapping failureBrian Foster3-14/+17
iomap writeback mapping failure only calls into ->discard_page() if the current page has not been added to the ioend. Accordingly, the XFS callback assumes a full page discard and invalidation. This is problematic for sub-page block size filesystems where some portion of a page might have been mapped successfully before a failure to map a delalloc block occurs. ->discard_page() is not called in that error scenario and the bio is explicitly failed by iomap via the error return from ->prepare_ioend(). As a result, the filesystem leaks delalloc blocks and corrupts the filesystem block counters. Since XFS is the only user of ->discard_page(), tweak the semantics to invoke the callback unconditionally on mapping errors and provide the file offset that failed to map. Update xfs_discard_page() to discard the corresponding portion of the file and pass the range along to iomap_invalidatepage(). The latter already properly handles both full and sub-page scenarios by not changing any iomap or page state on sub-page invalidations. Signed-off-by: Brian Foster <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2020-11-04xfs: flush new eof page on truncate to avoid post-eof corruptionBrian Foster1-0/+10
It is possible to expose non-zeroed post-EOF data in XFS if the new EOF page is dirty, backed by an unwritten block and the truncate happens to race with writeback. iomap_truncate_page() will not zero the post-EOF portion of the page if the underlying block is unwritten. The subsequent call to truncate_setsize() will, but doesn't dirty the page. Therefore, if writeback happens to complete after iomap_truncate_page() (so it still sees the unwritten block) but before truncate_setsize(), the cached page becomes inconsistent with the on-disk block. A mapped read after the associated page is reclaimed or invalidated exposes non-zero post-EOF data. For example, consider the following sequence when run on a kernel modified to explicitly flush the new EOF page within the race window: $ xfs_io -fc "falloc 0 4k" -c fsync /mnt/file $ xfs_io -c "pwrite 0 4k" -c "truncate 1k" /mnt/file ... $ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file 00000400: 00 00 00 00 00 00 00 00 ........ $ umount /mnt/; mount <dev> /mnt/ $ xfs_io -c "mmap 0 4k" -c "mread -v 1k 8" /mnt/file 00000400: cd cd cd cd cd cd cd cd ........ Update xfs_setattr_size() to explicitly flush the new EOF page prior to the page truncate to ensure iomap has the latest state of the underlying block. Fixes: 68a9f5e7007c ("xfs: implement iomap based buffered write path") Signed-off-by: Brian Foster <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2020-11-04drm: unify formatting for color management documentationSimon Ser1-2/+2
Other properties are documented with a colon character after the property name. Consistently using a colon character allows the docs to be machine-readable. Signed-off-by: Simon Ser <[email protected]> Cc: Daniel Vetter <[email protected]> Acked-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-04Merge branch 'master' of ↵Jakub Kicinski4-11/+13
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== 1) Fix packet receiving of standard IP tunnels when the xfrm_interface module is installed. From Xin Long. 2) Fix a race condition between spi allocating and hash list resizing. From zhuoliang zhang. ==================== Signed-off-by: Jakub Kicinski <[email protected]>
2020-11-04kprobes: Tell lockdep about kprobe nestingSteven Rostedt (VMware)1-4/+21
Since the kprobe handlers have protection that prohibits other handlers from executing in other contexts (like if an NMI comes in while processing a kprobe, and executes the same kprobe, it will get fail with a "busy" return). Lockdep is unaware of this protection. Use lockdep's nesting api to differentiate between locks taken in INT3 context and other context to suppress the false warnings. Link: https://lore.kernel.org/r/[email protected] Cc: Peter Zijlstra <[email protected]> Acked-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-11-04ALSA: usb-audio: Add implicit feedback quirk for MODXGeoffrey D. Bennett1-0/+1
This patch fixes audio distortion on playback for the Yamaha MODX. Signed-off-by: Geoffrey D. Bennett <[email protected]> Tested-by: Frank Slotta <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-11-04ALSA: usb-audio: add usb vendor id as DSD-capable for Khadas devicesArtem Lapkin1-0/+1
Khadas audio devices ( USB_ID_VENDOR 0x3353 ) have DSD-capable implementations from XMOS need add new usb vendor id for recognition Signed-off-by: Artem Lapkin <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-11-04drm/amdgpu/display: remove DRM_AMD_DC_GREEN_SARDINEAlex Deucher5-20/+0
No need for a separate config option at this point. Reviewed-by: Luben Tuikov <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amd/display: Add green_sardine support to DMRoman Li1-0/+12
Display Manager support for green_sardine Signed-off-by: Roman Li <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amd/display: Add green_sardine support to DCRoman Li4-0/+25
Display Core support for green_sardine Signed-off-by: Roman Li <[email protected]> Acked-by: Hersen Wu <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: enable vcn support for green_sardine (v2)Thong Thai1-1/+7
Enable Green_Sardine VCN support and VCN firmware loading v2: use apu flags Signed-off-by: Thong Thai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: enable green_sardine_asd.bin loading (v2)Aaron Liu1-1/+5
This patch enable green_sardine_asd.bin loading. v2: use apu flags Signed-off-by: Aaron Liu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Reviewed-by: Prike Liang <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu/sdma: add sdma engine support for green_sardine (v2)Prike Liang1-1/+5
Initialize the SDMA IP for green_sardine. v2: use apu flags Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: add gfx support for green_sardine (v2)Prike Liang1-1/+11
Enable the gfx base HW function of green_sardine. v2: use apu flags Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: add soc15 common ip block support for green_sardine (v3)Prike Liang1-2/+9
This patch adds common ip support for green_sardine. v2: use apu flags, squash in CG/PG enablement v3: rebase Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: add green_sardine support for gpu_info and ip block setting (v2)Prike Liang1-1/+5
This patch adds green_sardine support for gpu_info firmware and ip block setting. v2: use apu flag Signed-off-by: Prike Liang <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Huang Rui <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/amdgpu: add Green_Sardine APU flagAlex Deucher1-0/+1
Will be used for Green_Sardine which is a new APU. Signed-off-by: Alex Deucher <[email protected]>
2020-11-04drm/panfrost: Replace devm_reset_control_array_get()Yejune Deng1-1/+1
devm_reset_control_array_get_optional_exclusive() looks more readable Signed-off-by: Yejune Deng <[email protected]> Reviewed-by: Steven Price <[email protected]> Signed-off-by: Steven Price <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-04x86/lib: Change .weak to SYM_FUNC_START_WEAK for arch/x86/lib/mem*_64.SFangrui Song3-9/+3
Commit 393f203f5fd5 ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions") added .weak directives to arch/x86/lib/mem*_64.S instead of changing the existing ENTRY macros to WEAK. This can lead to the assembly snippet .weak memcpy ... .globl memcpy which will produce a STB_WEAK memcpy with GNU as but STB_GLOBAL memcpy with LLVM's integrated assembler before LLVM 12. LLVM 12 (since https://reviews.llvm.org/D90108) will error on such an overridden symbol binding. Commit ef1e03152cb0 ("x86/asm: Make some functions local") changed ENTRY in arch/x86/lib/memcpy_64.S to SYM_FUNC_START_LOCAL, which was ineffective due to the preceding .weak directive. Use the appropriate SYM_FUNC_START_WEAK instead. Fixes: 393f203f5fd5 ("x86_64: kasan: add interceptors for memset/memmove/memcpy functions") Fixes: ef1e03152cb0 ("x86/asm: Make some functions local") Reported-by: Sami Tolvanen <[email protected]> Signed-off-by: Fangrui Song <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Tested-by: Nathan Chancellor <[email protected]> Tested-by: Nick Desaulniers <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-11-04Documentation: remove mic/index from misc-devices/index.rstGreg Kroah-Hartman1-1/+0
With the recent removal of the misc/mic/ directory, the documentation build now warns because we forgot about this index file. Fix that up so that there are no more warnings here. Reported-by: Stephen Rothwell <[email protected]> Cc: Sudeep Dutt <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-11-04USB: serial: option: add LE910Cx compositions 0x1203, 0x1230, 0x1231Daniele Palmas1-0/+6
Add following Telit LE910Cx compositions: 0x1203: rndis, tty, adb, tty, tty, tty, tty 0x1230: tty, adb, rmnet, audio, tty, tty, tty, tty 0x1231: rndis, tty, adb, audio, tty, tty, tty, tty Signed-off-by: Daniele Palmas <[email protected]> Link: https://lore.kernel.org/r/[email protected] [ johan: add comments after entries ] Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2020-11-04drm/ttm: replace context flags with bools v2Christian König7-17/+14
The ttm_operation_ctx structure has a mixture of flags and bools. Drop the flags and replace them with bools as well. v2: fix typos, improve comments Signed-off-by: Christian König <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/398686/
2020-11-04drm/ttm: rework no_retry handling v2Christian König6-14/+5
During eviction we do want to trigger the OOM killer. Only while doing new allocations we should try to avoid that and return -ENOMEM to the application. v2: rename the flag to gfp_retry_mayfail. Signed-off-by: Christian König <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Link: https://patchwork.freedesktop.org/patch/398685/
2020-11-04USB: serial: cyberjack: fix write-URB completion raceJohan Hovold1-1/+6
The write-URB busy flag was being cleared before the completion handler was done with the URB, something which could lead to corrupt transfers due to a racing write request if the URB is resubmitted. Fixes: 507ca9bc0476 ("[PATCH] USB: add ability for usb-serial drivers to determine if their write urb is currently being used.") Cc: stable <[email protected]> # 2.6.13 Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-11-04ARM, xtensa: highmem: avoid clobbering non-page aligned memory reservationsArd Biesheuvel2-4/+4
free_highpages() iterates over the free memblock regions in high memory, and marks each page as available for the memory management system. Until commit cddb5ddf2b76 ("arm, xtensa: simplify initialization of high memory pages") it rounded beginning of each region upwards and end of each region downwards. However, after that commit free_highmem() rounds the beginning and end of each region downwards, and we may end up freeing a page that is memblock_reserve()d, resulting in memory corruption. Restore the original rounding of the region boundaries to avoid freeing reserved pages. Fixes: cddb5ddf2b76 ("arm, xtensa: simplify initialization of high memory pages") Link: https://lore.kernel.org/r/[email protected]/ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Ard Biesheuvel <[email protected]> Co-developed-by: Mike Rapoport <[email protected]> Signed-off-by: Mike Rapoport <[email protected]> Acked-by: Max Filippov <[email protected]>
2020-11-04Merge tag 'drm-intel-next-queued-2020-11-03' of ↵Dave Airlie82-1868/+4647
git://anongit.freedesktop.org/drm/drm-intel into drm-next drm/i915 features for v5.11 Highlights: - More DG1 enabling (Lucas, Matt, Aditya, Anshuman, Clinton, Matt, Stuart, Venkata) - Integer scaling filter support (Pankaj Bharadiya) - Asynchronous flip support (Karthik) Generic: - Fix gen12 forcewake tables (Matt) - Haswell PCI ID updates (Alexei Podtelezhnikov) Display: - ICL+ DSI command mode enabling (Vandita) - Shutdown displays grafecully on reboot/shutdown (Ville) - Don't register display debugfs when there is no display (Lucas) - Fix RKL CDCLK table (Matt) - Limit EHL/JSL eDP to HBR2 (José) - Handle incorrectly set (by BIOS) PLLs and DP link rates at probe (Imre) - Fix mode valid check wrt bpp for "YCbCr 4:2:0 only" modes (Ville) - State checker and dump fixes (Ville) - DP AUX backlight updates (Aaron Ma, Sean Paul) - Add DP LTTPR non-transparent link training mode (Imre) - PSR2 selective fetch enabling (José) - VBT updates (José) - HDCP updates (Ramalingam) Cleanups and refactoring: - HPD pin, AUX channel, and Type-C port identifier cleanup (Ville) - Hotplug and irq refactoring (Ville) - Better DDI encoder and AUX channel names (Ville) - Color LUT code cleanups (Ville) - Combo PHY code cleanups (Ville) - LSPCON code cleanups (Ville) - Documentation fixes (Mauro, Chris) Signed-off-by: Dave Airlie <[email protected]> From: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-11-03drm/amdgpu: resolved ASD loading issue on siennaJohn Clements1-0/+1
updated fw header v2 parser to set asd fw memory Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: John Clements <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 5.9.x
2020-11-03amdkfd: Check kvmalloc return before memcpyKent Russell1-1/+1
If we can't kvmalloc the pcrat_image, then we shouldn't memcpy Signed-off-by: Kent Russell <[email protected]> Reported-by: kernel test robot <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.