aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-03-31Merge tag 'perf_urgent_for_v6.9_rc2' of ↵Linus Torvalds7-16/+62
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf fixes from Borislav Petkov: - Define the correct set of default hw events on AMD Zen4 - Use the correct stalled cycles PMCs on AMD Zen2 and newer - Fix detection of the LBR freeze feature on AMD * tag 'perf_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/core: Define a proper ref-cycles event for Zen 4 and later perf/x86/amd/core: Update and fix stalled-cycles-* events for Zen 2 and later perf/x86/amd/lbr: Use freeze based on availability x86/cpufeatures: Add new word for scattered features
2024-03-31Merge tag 'timers_urgent_for_v6.9_rc2' of ↵Linus Torvalds1-8/+27
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timers update from Borislav Petkov: - Volunteer in Anna-Maria and Frederic as timers co-maintainers so that tglx can relax more :-P * tag 'timers_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: MAINTAINERS: Add co-maintainers for time[rs]
2024-03-31Merge tag 'objtool_urgent_for_v6.9_rc2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull objtool fix from Borislav Petkov: - Fix a format specifier build error in objtool during an x32 build * tag 'objtool_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: objtool: Fix compile failure when using the x32 compiler
2024-03-31Merge tag 'x86_urgent_for_v6.9_rc2' of ↵Linus Torvalds16-64/+64
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Make sure single object builds in arch/x86/virt/ ala make ... arch/x86/virt/vmx/tdx/seamcall.o work again - Do not do ROM range scans and memory validation when the kernel is running as a SEV-SNP guest as those can get problematic and, before that, are not really needed in such a guest - Exclude the build-time generated vdso-image-x32.o object from objtool validation and in particular the return sites in there due to a warning which fires when an unpatched return thunk is being used - Improve the NMI CPUs stall message to show additional information about the state of each CPU wrt the NMI handler - Enable gcc named address spaces support only on !KCSAN configs due to compiler options incompatibility - Revert a change which was trying to use GB pages for mapping regions only when the regions would be large enough but that change lead to kexec failing - A documentation fixlet * tag 'x86_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/build: Use obj-y to descend into arch/x86/virt/ x86/sev: Skip ROM range scans and validation for SEV-SNP guests x86/vdso: Fix rethunk patching for vdso-image-x32.o too x86/nmi: Upgrade NMI backtrace stall checks & messages x86/percpu: Disable named address spaces for KCSAN Revert "x86/mm/ident_map: Use gbpages only where full GB page should be mapped." Documentation/x86: Fix title underline length
2024-03-31kconfig: Fix typo HEIGTH to HEIGHTIsak Ellmer8-14/+14
Fixed a typo in some variables where height was misspelled as heigth. Signed-off-by: Isak Ellmer <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2024-03-31Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newerNathan Chancellor1-1/+1
As of the first s390 pull request during the 6.9 merge window, commit 691632f0e869 ("Merge tag 's390-6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux"), s390 can be built with LLVM=1 when using LLVM 18.1.0, which is the first version that has SystemZ support implemented in ld.lld and llvm-objcopy. Update the supported architectures table in the Kbuild LLVM documentation to note this explicitly to make it more discoverable by users and other developers. Additionally, this brings s390 in line with the rest of the architectures in the table, which all support LLVM=1. Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2024-03-31kbuild: Disable KCSAN for autogenerated *.mod.c intermediariesBorislav Petkov (AMD)1-1/+1
When KCSAN and CONSTRUCTORS are enabled, one can trigger the "Unpatched return thunk in use. This should not happen!" catch-all warning. Usually, when objtool runs on the .o objects, it does generate a section .return_sites which contains all offsets in the objects to the return thunks of the functions present there. Those return thunks then get patched at runtime by the alternatives. KCSAN and CONSTRUCTORS add this to the object file's .text.startup section: ------------------- Disassembly of section .text.startup: ... 0000000000000010 <_sub_I_00099_0>: 10: f3 0f 1e fa endbr64 14: e8 00 00 00 00 call 19 <_sub_I_00099_0+0x9> 15: R_X86_64_PLT32 __tsan_init-0x4 19: e9 00 00 00 00 jmp 1e <__UNIQUE_ID___addressable_cryptd_alloc_aead349+0x6> 1a: R_X86_64_PLT32 __x86_return_thunk-0x4 ------------------- which, if it is built as a module goes through the intermediary stage of creating a <module>.mod.c file which, when translated, receives a second constructor: ------------------- Disassembly of section .text.startup: 0000000000000010 <_sub_I_00099_0>: 10: f3 0f 1e fa endbr64 14: e8 00 00 00 00 call 19 <_sub_I_00099_0+0x9> 15: R_X86_64_PLT32 __tsan_init-0x4 19: e9 00 00 00 00 jmp 1e <_sub_I_00099_0+0xe> 1a: R_X86_64_PLT32 __x86_return_thunk-0x4 ... 0000000000000030 <_sub_I_00099_0>: 30: f3 0f 1e fa endbr64 34: e8 00 00 00 00 call 39 <_sub_I_00099_0+0x9> 35: R_X86_64_PLT32 __tsan_init-0x4 39: e9 00 00 00 00 jmp 3e <__ksymtab_cryptd_alloc_ahash+0x2> 3a: R_X86_64_PLT32 __x86_return_thunk-0x4 ------------------- in the .ko file. Objtool has run already so that second constructor's return thunk cannot be added to the .return_sites section and thus the return thunk remains unpatched and the warning rightfully fires. Drop KCSAN flags from the mod.c generation stage as those constructors do not contain data races one would be interested about. Debugged together with David Kaplan <[email protected]> and Nikolay Borisov <[email protected]>. Reported-by: Paul Menzel <[email protected]> Closes: https://lore.kernel.org/r/[email protected] Signed-off-by: Borislav Petkov (AMD) <[email protected]> Tested-by: Paul Menzel <[email protected]> # Dell XPS 13 Reviewed-by: Nikolay Borisov <[email protected]> Reviewed-by: Marco Elver <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2024-03-31kbuild: make -Woverride-init warnings more consistentArnd Bergmann13-23/+18
The -Woverride-init warn about code that may be intentional or not, but the inintentional ones tend to be real bugs, so there is a bit of disagreement on whether this warning option should be enabled by default and we have multiple settings in scripts/Makefile.extrawarn as well as individual subsystems. Older versions of clang only supported -Wno-initializer-overrides with the same meaning as gcc's -Woverride-init, though all supported versions now work with both. Because of this difference, an earlier cleanup of mine accidentally turned the clang warning off for W=1 builds and only left it on for W=2, while it's still enabled for gcc with W=1. There is also one driver that only turns the warning off for newer versions of gcc but not other compilers, and some but not all the Makefiles still use a cc-disable-warning conditional that is no longer needed with supported compilers here. Address all of the above by removing the special cases for clang and always turning the warning off unconditionally where it got in the way, using the syntax that is supported by both compilers. Fixes: 2cd3271b7a31 ("kbuild: avoid duplicate warning options") Signed-off-by: Arnd Bergmann <[email protected]> Acked-by: Hamza Mahfooz <[email protected]> Acked-by: Jani Nikula <[email protected]> Acked-by: Andrew Jeffery <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Reviewed-by: Linus Walleij <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2024-03-30objtool: Fix compile failure when using the x32 compilerMikulas Patocka1-1/+1
When compiling the v6.9-rc1 kernel with the x32 compiler, the following errors are reported. The reason is that we take an "unsigned long" variable and print it using "PRIx64" format string. In file included from check.c:16: check.c: In function ‘add_dead_ends’: /usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:46:17: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=] 46 | "%s: warning: objtool: " format "\n", \ | ^~~~~~~~~~~~~~~~~~~~~~~~ check.c:613:33: note: in expansion of macro ‘WARN’ 613 | WARN("can't find unreachable insn at %s+0x%" PRIx64, | ^~~~ ... Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Cc: Josh Poimboeuf <[email protected]> Cc: [email protected]
2024-03-30Merge tag 'xfs-6.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linuxLinus Torvalds6-32/+41
Pull xfs fixes from Chandan Babu: - Allow stripe unit/width value passed via mount option to be written over existing values in the super block - Do not set current->journal_info to avoid its value from being miused by another filesystem context * tag 'xfs-6.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: xfs: don't use current->journal_info xfs: allow sunit mount option to repair bad primary sb stripe values
2024-03-30Merge tag 'scsi-fixes' of ↵Linus Torvalds47-355/+479
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes and updates from James Bottomley: "Fully half this pull is updates to lpfc and qla2xxx which got committed just as the merge window opened. A sizeable fraction of the driver updates are simple bug fixes (and lock reworks for bug fixes in the case of lpfc), so rather than splitting the few actual enhancements out, we're just adding the drivers to the -rc1 pull. The enhancements for lpfc are log message removals, copyright updates and three patches redefining types. For qla2xxx it's just removing a debug message on module removal and the manufacturer detail update. The two major fixes are the sg teardown race and a core error leg problem with the procfs directory not being removed if we destroy a created host that never got to the running state. The rest are minor fixes and constifications" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits) scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload scsi: core: Fix unremoved procfs host directory regression scsi: mpi3mr: Avoid memcpy field-spanning write WARNING scsi: sd: Fix TCG OPAL unlock on system resume scsi: sg: Avoid sg device teardown race scsi: lpfc: Copyright updates for 14.4.0.1 patches scsi: lpfc: Update lpfc version to 14.4.0.1 scsi: lpfc: Define types in a union for generic void *context3 ptr scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr scsi: lpfc: Use a dedicated lock for ras_fwlog state scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up() scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port() scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling scsi: lpfc: Move NPIV's transport unregistration to after resource clean up scsi: lpfc: Remove unnecessary log message in queuecommand path scsi: qla2xxx: Update version to 10.02.09.200-k scsi: qla2xxx: Delay I/O Abort on PCI error scsi: qla2xxx: Change debug message during driver unload ...
2024-03-30Merge tag 'i2c-for-6.9-rc2' of ↵Linus Torvalds1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c fix from Wolfram Sang: "A fix from Andi for I2C host drivers" * tag 'i2c-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: i2c: i801: Fix a refactoring that broke a touchpad on Lenovo P1
2024-03-30Merge tag 'usb-6.9-rc2' of ↵Linus Torvalds27-160/+376
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a bunch of small USB fixes for reported problems and regressions for 6.9-rc2. Included in here are: - deadlock fixes for long-suffering issues - USB phy driver revert for reported problem - typec fixes for reported problems - duplicate id in dwc3 dropped - dwc2 driver fixes - udc driver warning fix - cdc-wdm race bugfix - other tiny USB bugfixes All of these have been in linux-next this past week with no reported issues" * tag 'usb-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits) USB: core: Fix deadlock in port "disable" sysfs attribute USB: core: Add hub_get() and hub_put() routines usb: typec: ucsi: Check capabilities before cable and identity discovery usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset usb: typec: ucsi_acpi: Refactor and fix DELL quirk usb: typec: ucsi: Ack unsupported commands usb: typec: ucsi: Check for notifications after init usb: typec: ucsi: Clear EVENT_PENDING under PPM lock usb: typec: Return size of buffer if pd_set operation succeeds usb: udc: remove warning when queue disabled ep usb: dwc3: pci: Drop duplicate ID usb: dwc3: Properly set system wakeup Revert "usb: phy: generic: Get the vbus supply" usb: cdc-wdm: close race between read and workqueue usb: dwc2: gadget: LPM flow fix usb: dwc2: gadget: Fix exiting from clock gating usb: dwc2: host: Fix ISOC flow in DDMA mode usb: dwc2: host: Fix remote wakeup from hibernation usb: dwc2: host: Fix hibernation flow USB: core: Fix deadlock in usb_deauthorize_interface() ...
2024-03-30Merge tag 'staging-6.9-rc2' of ↵Linus Torvalds1-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are two small staging driver fixes for the vc04_services driver that resolve reported problems: - strncpy fix for information leak - another information leak discovered by the previous strncpy fix Both of these have been in linux-next all this past week with no reported issues" * tag 'staging-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: vc04_services: fix information leak in create_component() staging: vc04_services: changen strncpy() to strscpy_pad()
2024-03-30Merge tag 'i2c-host-fixes-6.9-rc2' of ↵Wolfram Sang1-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current One fix in the i801 driver where a bug caused touchpad malfunctions on some Lenovo P1 models by incorrectly overwriting a status variable during successful SMBUS transactions.
2024-03-30x86/build: Use obj-y to descend into arch/x86/virt/Masahiro Yamada3-4/+2
Commit c33621b4c5ad ("x86/virt/tdx: Wire up basic SEAMCALL functions") introduced a new instance of core-y instead of the standardized obj-y syntax. X86 Makefiles descend into subdirectories of arch/x86/virt inconsistently; into arch/x86/virt/ via core-y defined in arch/x86/Makefile, but into arch/x86/virt/svm/ via obj-y defined in arch/x86/Kbuild. This is problematic when you build a single object in parallel because multiple threads attempt to build the same file. $ make -j$(nproc) arch/x86/virt/vmx/tdx/seamcall.o [ snip ] AS arch/x86/virt/vmx/tdx/seamcall.o AS arch/x86/virt/vmx/tdx/seamcall.o fixdep: error opening file: arch/x86/virt/vmx/tdx/.seamcall.o.d: No such file or directory make[4]: *** [scripts/Makefile.build:362: arch/x86/virt/vmx/tdx/seamcall.o] Error 2 Use the obj-y syntax, as it works correctly. Signed-off-by: Masahiro Yamada <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2024-03-30ALSA: hda/realtek: Add quirks for ASUS Laptops using CS35L56Simon Trimmer1-1/+52
These ASUS laptops use the Realtek HDA codec combined with a number of CS35L56 amplifiers. The SSID of the GA403U matches a previous ASUS laptop - we can tell them apart because they use different codecs. Signed-off-by: Simon Trimmer <[email protected]> Message-ID: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2024-03-29Merge tag 'drm-fixes-2024-03-30' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds74-448/+565
Pull drm fixes from Dave Airlie: "Regular fixes for rc2, quite a few i915/amdgpu as usual, some xe, and then mostly scattered around. rc3 might be quieter with the holidays but we shall see. bridge: - select DRM_KMS_HELPER dma-buf: - fix NULL-pointer deref dp: - fix div-by-zero in DP MST unplug code fbdev: - select FB_IOMEM_FOPS for SBus sched: - fix NULL-pointer deref xe: - Fix build on mips - Fix wrong bound checks - Fix use of msec rather than jiffies - Remove dead code amdgpu: - SMU 14.0.1 updates - DCN 3.5.x updates - VPE fix - eDP panel flickering fix - Suspend fix - PSR fix - DCN 3.0+ fix - VCN 4.0.6 updates - debugfs fix amdkfd: - DMA-Buf fix - GFX 9.4.2 TLB flush fix - CP interrupt fix i915: - Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c - Update a MTL workaround - Fix locking inversion in hwmon's sysfs - Remove a bogus error message around PXP - Fix UAF on VMA - Reset queue_priority_hint on parking - Display Fixes: - Remove duplicated audio enable/disable on SDVO and DP - Disable AuxCCS for Xe driver - Revert init order of MIPI DSI - DRRS debugfs fix with an extra refactor patch - VRR related fixes - Fix a JSL eDP corruption - Fix the cursor physical dma address - BIOS VBT related fix nouveau: - dmem: handle kcalloc() allocation failures qxl: - remove unused variables rockchip: - vop2: remove support for AR30 and AB30 formats vmwgfx: - debugfs: create ttm_resource_manager entry only if needed" * tag 'drm-fixes-2024-03-30' of https://gitlab.freedesktop.org/drm/kernel: (55 commits) drm/i915/bios: Tolerate devdata==NULL in intel_bios_encoder_supports_dp_dual_mode() drm/i915: Pre-populate the cursor physical dma address drm/i915/gt: Reset queue_priority_hint on parking drm/i915/vma: Fix UAF on destroy against retire race drm/i915: Do not print 'pxp init failed with 0' when it succeed drm/i915: Do not match JSL in ehl_combo_pll_div_frac_wa_needed() drm/i915/hwmon: Fix locking inversion in sysfs getter drm/i915/dsb: Fix DSB vblank waits when using VRR drm/i915/vrr: Generate VRR "safe window" for DSB drm/i915/display/debugfs: Fix duplicate checks in i915_drrs_status drm/i915/drrs: Refactor CPU transcoder DRRS check drm/i915/mtl: Update workaround 14018575942 drm/i915/dsi: Go back to the previous INIT_OTP/DISPLAY_ON order, mostly drm/i915/display: Disable AuxCCS framebuffers if built for Xe drm/i915: Stop doing double audio enable/disable on SDVO and g4x+ DP drm/i915: Add includes for BUG_ON/BUILD_BUG_ON in i915_memcpy.c drm/qxl: remove unused variable from `qxl_process_single_command()` drm/qxl: remove unused `count` variable from `qxl_surface_id_alloc()` drm/i915: add bug.h include to i915_memcpy.c drm/vmwgfx: Create debugfs ttm_resource_manager entry only if needed ...
2024-03-29Merge tag 'linux_kselftest-fixes-6.9-rc2' of ↵Linus Torvalds3-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "Fixes to seccomp and ftrace tests and a change to add config file for dmabuf-heap test to increase coverage" * tag 'linux_kselftest-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: dmabuf-heap: add config file for the test selftests/seccomp: Try to fit runtime of benchmark into timeout selftests/ftrace: Fix event filter target_func selection
2024-03-29Merge tag 'linux_kselftest-kunit-fixes-6.9-rc2' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull KUnit fixes from Shuah Khan: "One urgent fix for --alltests build failure related to renaming of CONFIG_DAMON_DBGFS to DAMON_DBGFS_DEPRECATED to the missing config option" * tag 'linux_kselftest-kunit-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kunit: configs: Enable CONFIG_DAMON_DBGFS_DEPRECATED for --alltests
2024-03-29Merge tag 'for-net-2024-03-29' of ↵Jakub Kicinski9-33/+98
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Bluetooth: Fix TOCTOU in HCI debugfs implementation - Bluetooth: hci_event: set the conn encrypted before conn establishes - Bluetooth: qca: fix device-address endianness - Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync * tag 'for-net-2024-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: Fix TOCTOU in HCI debugfs implementation Bluetooth: hci_event: set the conn encrypted before conn establishes Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync Bluetooth: qca: fix device-address endianness Bluetooth: add quirk for broken address properties arm64: dts: qcom: sc7180-trogdor: mark bluetooth address as broken dt-bindings: bluetooth: add 'qcom,local-bd-address-broken' Revert "Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT" ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29Merge branch 'tcp-fix-bind-regression-and-more-tests'Jakub Kicinski2-77/+736
Kuniyuki Iwashima says: ==================== tcp: Fix bind() regression and more tests. bhash2 has not been well tested for IPV6_V6ONLY option. This series fixes two regression around IPV6_V6ONLY, one of which has been there since bhash2 introduction, and another is introduced by a recent change. Also, this series adds as many tests as possible to catch regression easily. The baseline is 28044fc1d495~ which is pre-bhash2 commit. Tested on 28044fc1d495~: # PASSED: 132 / 132 tests passed. # Totals: pass:132 fail:0 xfail:0 xpass:0 skip:0 error:0 net.git: # FAILED: 125 / 132 tests passed. # Totals: pass:125 fail:7 xfail:0 xpass:0 skip:0 error:0 With this series: # PASSED: 132 / 132 tests passed. # Totals: pass:132 fail:0 xfail:0 xpass:0 skip:0 error:0 v1: https://lore.kernel.org/netdev/[email protected]/ ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29selftest: tcp: Add bind() tests for SO_REUSEADDR/SO_REUSEPORT.Kuniyuki Iwashima1-6/+257
This patch adds two tests using SO_REUSEADDR and SO_REUSEPORT and defines errno for each test case. SO_REUSEADDR/SO_REUSEPORT is set for the per-fixture two bind() calls. The notable pattern is the pair of v6only [::] and plain [::]. The two sockets are put into the same tb2, where per-bucket v6only flag would be useless to detect bind() conflict. Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29selftest: tcp: Add bind() tests for IPV6_V6ONLY.Kuniyuki Iwashima1-0/+116
bhash2 was not well tested for IPv6-only sockets. This patch adds test cases where we set IPV6_V6ONLY for per-fixture bind() calls if variant->ipv6_only[i] is true. Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29selftest: tcp: Add more bind() calls.Kuniyuki Iwashima1-59/+166
In addtition to the two addresses defined in the fixtures, this patch add 6 more bind calls(): * 0.0.0.0 * 127.0.0.1 * :: * ::1 * ::ffff:0.0.0.0 * ::ffff:127.0.0.1 The first two per-fixture bind() calls control how inet_bind2_bucket is created, and the rest 6 bind() calls cover as many conflicting patterns as possible. Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29selftest: tcp: Add v4-v4 and v6-v6 bind() conflict tests.Kuniyuki Iwashima1-0/+100
We don't have bind() conflict tests for the same protocol pairs. Let's add them except for the same address pair, which will be covered by the following patch adding 6 more bind() calls for each test case. Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29selftest: tcp: Define the reverse order bind() tests explicitly.Kuniyuki Iwashima1-8/+59
Currently, bind_wildcard.c calls bind() twice for two addresses and checks the pre-defined errno against the 2nd call. Also, the two bind() calls are swapped to cover various patterns how bind buckets are created. However, only testing two addresses is insufficient to detect regression. So, we will add more bind() calls, and then, we need to define different errno for each bind() per test case. As a prepartion, let's define the reverse order bind() test cases as fixtures. No functional changes are intended. Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29selftest: tcp: Make bind() selftest flexible.Kuniyuki Iwashima1-34/+58
Currently, bind_wildcard.c tests only (IPv4, IPv6) pairs, but we will add more tests for the same protocol pairs. This patch makes it possible by changing the address pointer to void. No functional changes are intended. Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29tcp: Fix bind() regression for v6-only wildcard and v4(-mapped-v6) ↵Kuniyuki Iwashima1-8/+11
non-wildcard addresses. Jianguo Wu reported another bind() regression introduced by bhash2. Calling bind() for the following 3 addresses on the same port, the 3rd one should fail but now succeeds. 1. 0.0.0.0 or ::ffff:0.0.0.0 2. [::] w/ IPV6_V6ONLY 3. IPv4 non-wildcard address or v4-mapped-v6 non-wildcard address The first two bind() create tb2 like this: bhash2 -> tb2(:: w/ IPV6_V6ONLY) -> tb2(0.0.0.0) The 3rd bind() will match with the IPv6 only wildcard address bucket in inet_bind2_bucket_match_addr_any(), however, no conflicting socket exists in the bucket. So, inet_bhash2_conflict() will returns false, and thus, inet_bhash2_addr_any_conflict() returns false consequently. As a result, the 3rd bind() bypasses conflict check, which should be done against the IPv4 wildcard address bucket. So, in inet_bhash2_addr_any_conflict(), we must iterate over all buckets. Note that we cannot add ipv6_only flag for inet_bind2_bucket as it would confuse the following patetrn. 1. [::] w/ SO_REUSE{ADDR,PORT} and IPV6_V6ONLY 2. [::] w/ SO_REUSE{ADDR,PORT} 3. IPv4 non-wildcard address or v4-mapped-v6 non-wildcard address The first bind() would create a bucket with ipv6_only flag true, the second bind() would add the [::] socket into the same bucket, and the third bind() could succeed based on the wrong assumption that ipv6_only bucket would not conflict with v4(-mapped-v6) address. Fixes: 28044fc1d495 ("net: Add a bhash2 table hashed by port and address") Diagnosed-by: Jianguo Wu <[email protected]> Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29tcp: Fix bind() regression for v6-only wildcard and v4-mapped-v6 ↵Kuniyuki Iwashima1-2/+9
non-wildcard addresses. Commit 5e07e672412b ("tcp: Use bhash2 for v4-mapped-v6 non-wildcard address.") introduced bind() regression for v4-mapped-v6 address. When we bind() the following two addresses on the same port, the 2nd bind() should succeed but fails now. 1. [::] w/ IPV6_ONLY 2. ::ffff:127.0.0.1 After the chagne, v4-mapped-v6 uses bhash2 instead of bhash to detect conflict faster, but I forgot to add a necessary change. During the 2nd bind(), inet_bind2_bucket_match_addr_any() returns the tb2 bucket of [::], and inet_bhash2_conflict() finally calls inet_bind_conflict(), which returns true, meaning conflict. inet_bhash2_addr_any_conflict |- inet_bind2_bucket_match_addr_any <-- return [::] bucket `- inet_bhash2_conflict `- __inet_bhash2_conflict <-- checks IPV6_ONLY for AF_INET | but not for v4-mapped-v6 address `- inet_bind_conflict <-- does not check address inet_bind_conflict() does not check socket addresses because __inet_bhash2_conflict() is expected to do so. However, it checks IPV6_V6ONLY attribute only against AF_INET socket, and not for v4-mapped-v6 address. As a result, v4-mapped-v6 address conflicts with v6-only wildcard address. To avoid that, let's add the missing test to use bhash2 for v4-mapped-v6 address. Fixes: 5e07e672412b ("tcp: Use bhash2 for v4-mapped-v6 non-wildcard address.") Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29selftests: dmabuf-heap: add config file for the testMuhammad Usama Anjum1-0/+3
The config fragment enlists all the config options needed for the test. This config is merged into the kernel's config on which this test is run. Fixed whitespace errors during commit: Shuah Khan <[email protected]> Reviewed-by: T.J. Mercier <[email protected]> Signed-off-by: Muhammad Usama Anjum <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-03-29selftests/seccomp: Try to fit runtime of benchmark into timeoutMark Brown1-1/+1
The seccomp benchmark runs five scenarios, one calibration run with no seccomp filters enabled then four further runs each adding a filter. The calibration run times itself for 15s and then each additional run executes for the same number of times. Currently the seccomp tests, including the benchmark, run with an extended 120s timeout but this is not sufficient to robustly run the tests on a lot of platforms. Sample timings from some recent runs: Platform Run 1 Run 2 Run 3 Run 4 --------- ----- ----- ----- ----- PowerEdge R200 16.6s 16.6s 31.6s 37.4s BBB (arm) 20.4s 20.4s 54.5s Synquacer (arm64) 20.7s 23.7s 40.3s The x86 runs from the PowerEdge are quite marginal and routinely fail, for the successful run reported here the timed portions of the run are at 117.2s leaving less than 3s of margin which is frequently breached. The added overhead of adding filters on the other platforms is such that there is no prospect of their runs fitting into the 120s timeout, especially on 32 bit arm where there is no BPF JIT. While we could lower the time we calibrate for I'm also already seeing the currently completing runs reporting issues with the per filter overheads not matching expectations: Let's instead raise the timeout to 180s which is only a 50% increase on the current timeout which is itself not *too* large given that there's only two tests in this suite. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-03-29selftests/ftrace: Fix event filter target_func selectionMark Rutland1-1/+1
The event filter function test has been failing in our internal test farm: | # not ok 33 event filter function - test event filtering on functions Running the test in verbose mode indicates that this is because the test erroneously determines that kmem_cache_free() is the most common caller of kmem_cache_free(): # # + cut -d: -f3 trace # # + sed s/call_site=([^+]*)+0x.*/1/ # # + sort # # + uniq -c # # + sort # # + tail -n 1 # # + sed s/^[ 0-9]*// # # + target_func=kmem_cache_free ... and as kmem_cache_free() doesn't call itself, setting this as the filter function for kmem_cache_free() results in no hits, and consequently the test fails: # # + grep kmem_cache_free trace # # + grep kmem_cache_free # # + wc -l # # + hitcnt=0 # # + grep kmem_cache_free trace # # + grep -v kmem_cache_free # # + wc -l # # + misscnt=0 # # + [ 0 -eq 0 ] # # + exit_fail This seems to be because the system in question has tasks with ':' in their name (which a number of kernel worker threads have). These show up in the trace, e.g. test:.sh-1299 [004] ..... 2886.040608: kmem_cache_free: call_site=putname+0xa4/0xc8 ptr=000000000f4d22f4 name=names_cache ... and so when we try to extact the call_site with: cut -d: -f3 trace | sed 's/call_site=\([^+]*\)+0x.*/\1/' ... the 'cut' command will extrace the column containing 'kmem_cache_free' rather than the column containing 'call_site=...', and the 'sed' command will leave this unchanged. Consequently, the test will decide to use 'kmem_cache_free' as the filter function, resulting in the failure seen above. Fix this by matching the 'call_site=<func>' part specifically to extract the function name. Signed-off-by: Mark Rutland <[email protected]> Reported-by: Aishwarya TCV <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Mathieu Desnoyers <[email protected]> Cc: Shuah Khan <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Acked-by: Masami Hiramatsu (Google) <[email protected]> Signed-off-by: Shuah Khan <[email protected]>
2024-03-29erspan: make sure erspan_base_hdr is present in skb->headEric Dumazet2-0/+8
syzbot reported a problem in ip6erspan_rcv() [1] Issue is that ip6erspan_rcv() (and erspan_rcv()) no longer make sure erspan_base_hdr is present in skb linear part (skb->head) before getting @ver field from it. Add the missing pskb_may_pull() calls. v2: Reload iph pointer in erspan_rcv() after pskb_may_pull() because skb->head might have changed. [1] BUG: KMSAN: uninit-value in pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] BUG: KMSAN: uninit-value in pskb_may_pull include/linux/skbuff.h:2756 [inline] BUG: KMSAN: uninit-value in ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] BUG: KMSAN: uninit-value in gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 pskb_may_pull_reason include/linux/skbuff.h:2742 [inline] pskb_may_pull include/linux/skbuff.h:2756 [inline] ip6erspan_rcv net/ipv6/ip6_gre.c:541 [inline] gre_rcv+0x11f8/0x1930 net/ipv6/ip6_gre.c:610 ip6_protocol_deliver_rcu+0x1d4c/0x2ca0 net/ipv6/ip6_input.c:438 ip6_input_finish net/ipv6/ip6_input.c:483 [inline] NF_HOOK include/linux/netfilter.h:314 [inline] ip6_input+0x15d/0x430 net/ipv6/ip6_input.c:492 ip6_mc_input+0xa7e/0xc80 net/ipv6/ip6_input.c:586 dst_input include/net/dst.h:460 [inline] ip6_rcv_finish+0x955/0x970 net/ipv6/ip6_input.c:79 NF_HOOK include/linux/netfilter.h:314 [inline] ipv6_rcv+0xde/0x390 net/ipv6/ip6_input.c:310 __netif_receive_skb_one_core net/core/dev.c:5538 [inline] __netif_receive_skb+0x1da/0xa00 net/core/dev.c:5652 netif_receive_skb_internal net/core/dev.c:5738 [inline] netif_receive_skb+0x58/0x660 net/core/dev.c:5798 tun_rx_batched+0x3ee/0x980 drivers/net/tun.c:1549 tun_get_user+0x5566/0x69e0 drivers/net/tun.c:2002 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 Uninit was created at: slab_post_alloc_hook mm/slub.c:3804 [inline] slab_alloc_node mm/slub.c:3845 [inline] kmem_cache_alloc_node+0x613/0xc50 mm/slub.c:3888 kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:577 __alloc_skb+0x35b/0x7a0 net/core/skbuff.c:668 alloc_skb include/linux/skbuff.h:1318 [inline] alloc_skb_with_frags+0xc8/0xbf0 net/core/skbuff.c:6504 sock_alloc_send_pskb+0xa81/0xbf0 net/core/sock.c:2795 tun_alloc_skb drivers/net/tun.c:1525 [inline] tun_get_user+0x209a/0x69e0 drivers/net/tun.c:1846 tun_chr_write_iter+0x3af/0x5d0 drivers/net/tun.c:2048 call_write_iter include/linux/fs.h:2108 [inline] new_sync_write fs/read_write.c:497 [inline] vfs_write+0xb63/0x1520 fs/read_write.c:590 ksys_write+0x20f/0x4c0 fs/read_write.c:643 __do_sys_write fs/read_write.c:655 [inline] __se_sys_write fs/read_write.c:652 [inline] __x64_sys_write+0x93/0xe0 fs/read_write.c:652 do_syscall_64+0xd5/0x1f0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 CPU: 1 PID: 5045 Comm: syz-executor114 Not tainted 6.9.0-rc1-syzkaller-00021-g962490525cff #0 Fixes: cb73ee40b1b3 ("net: ip_gre: use erspan key field for tunnel lookup") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Eric Dumazet <[email protected]> Cc: Lorenzo Bianconi <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29r8169: skip DASH fw status checks when DASH is disabledAtlas Yu1-4/+27
On devices that support DASH, the current code in the "rtl_loop_wait" function raises false alarms when DASH is disabled. This occurs because the function attempts to wait for the DASH firmware to be ready, even though it's not relevant in this case. r8169 0000:0c:00.0 eth0: RTL8168ep/8111ep, 38:7c:76:49:08:d9, XID 502, IRQ 86 r8169 0000:0c:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko] r8169 0000:0c:00.0 eth0: DASH disabled ... r8169 0000:0c:00.0 eth0: rtl_ep_ocp_read_cond == 0 (loop: 30, delay: 10000). This patch modifies the driver start/stop functions to skip checking the DASH firmware status when DASH is explicitly disabled. This prevents unnecessary delays and false alarms. The patch has been tested on several ThinkStation P8/PX workstations. Fixes: 0ab0c45d8aae ("r8169: add handling DASH when DASH is disabled") Signed-off-by: Atlas Yu <[email protected]> Reviewed-by: Heiner Kallweit <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29octeontx2-pf: check negative error code in otx2_open()Su Hui1-1/+1
otx2_rxtx_enable() return negative error code such as -EIO, check -EIO rather than EIO to fix this problem. Fixes: c926252205c4 ("octeontx2-pf: Disable packet I/O for graceful exit") Signed-off-by: Su Hui <[email protected]> Reviewed-by: Subbaraya Sundeep <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Kalesh AP <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-30Merge tag 'drm-intel-fixes-2024-03-28' of ↵Dave Airlie22-63/+161
https://anongit.freedesktop.org/git/drm/drm-intel into drm-fixes Core/GT Fixes: - Fix for BUG_ON/BUILD_BUG_ON IN I915_memcpy.c (Joonas) - Update a MTL workaround (Tejas) - Fix locking inversion in hwmon's sysfs (Janusz) - Remove a bogus error message around PXP (Jose) - Fix UAF on VMA (Janusz) - Reset queue_priority_hint on parking (Chris) Display Fixes: - Remove duplicated audio enable/disable on SDVO and DP (Ville) - Disable AuxCCS for Xe driver (Juha-Pekka) - Revert init order of MIPI DSI (Ville) - DRRS debugfs fix with an extra refactor patch (Bhanuprakash) - VRR related fixes (Ville) - Fix a JSL eDP corruption (Jonathon) - Fix the cursor physical dma address (Ville) - BIOS VBT related fix (Ville) Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-03-29net: do not consume a cacheline for system_page_poolEric Dumazet1-1/+1
There is no reason to consume a full cacheline to store system_page_pool. We can eventually move it to softnet_data later for full locality control. Fixes: 2b0cfa6e4956 ("net: add generic percpu page_pool allocator") Signed-off-by: Eric Dumazet <[email protected]> Cc: Lorenzo Bianconi <[email protected]> Cc: Toke Høiland-Jørgensen <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29Merge branch '40GbE' of ↵Jakub Kicinski6-41/+93
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2024-03-26 (i40e) This series contains updates to i40e driver only. Ivan Vecera resolves an issue where descriptors could be missed when exiting busy poll. Aleksandr corrects counting of MAC filters to only include new or active filters and resolves possible use of incorrect/stale 'vf' variable. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: fix vf may be used uninitialized in this function warning i40e: fix i40e_count_filters() to count only active/new filters i40e: Enforce software interrupt during busy-poll exit ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29x86/bugs: Fix the SRSO mitigation on Zen3/4Borislav Petkov (AMD)3-10/+23
The original version of the mitigation would patch in the calls to the untraining routines directly. That is, the alternative() in UNTRAIN_RET will patch in the CALL to srso_alias_untrain_ret() directly. However, even if commit e7c25c441e9e ("x86/cpu: Cleanup the untrain mess") meant well in trying to clean up the situation, due to micro- architectural reasons, the untraining routine srso_alias_untrain_ret() must be the target of a CALL instruction and not of a JMP instruction as it is done now. Reshuffle the alternative macros to accomplish that. Fixes: e7c25c441e9e ("x86/cpu: Cleanup the untrain mess") Signed-off-by: Borislav Petkov (AMD) <[email protected]> Reviewed-by: Ingo Molnar <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2024-03-29Merge tag '6.9-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds4-2/+27
Pull smb client fixes from Steve French: - Add missing trace point (noticed when debugging the recent mknod LSM regression) - fscache fix * tag '6.9-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Fix duplicate fscache cookie warnings smb3: add trace event for mknod
2024-03-29net/rds: fix possible cp null dereferenceMahmoud Adam1-1/+1
cp might be null, calling cp->cp_conn would produce null dereference [Simon Horman adds:] Analysis: * cp is a parameter of __rds_rdma_map and is not reassigned. * The following call-sites pass a NULL cp argument to __rds_rdma_map() - rds_get_mr() - rds_get_mr_for_dest * Prior to the code above, the following assumes that cp may be NULL (which is indicative, but could itself be unnecessary) trans_private = rs->rs_transport->get_mr( sg, nents, rs, &mr->r_key, cp ? cp->cp_conn : NULL, args->vec.addr, args->vec.bytes, need_odp ? ODP_ZEROBASED : ODP_NOT_NEEDED); * The code modified by this patch is guarded by IS_ERR(trans_private), where trans_private is assigned as per the previous point in this analysis. The only implementation of get_mr that I could locate is rds_ib_get_mr() which can return an ERR_PTR if the conn (4th) argument is NULL. * ret is set to PTR_ERR(trans_private). rds_ib_get_mr can return ERR_PTR(-ENODEV) if the conn (4th) argument is NULL. Thus ret may be -ENODEV in which case the code in question will execute. Conclusion: * cp may be NULL at the point where this patch adds a check; this patch does seem to address a possible bug Fixes: c055fc00c07b ("net/rds: fix WARNING in rds_conn_connect_if_down") Cc: [email protected] # v4.19+ Signed-off-by: Mahmoud Adam <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29net: dsa: mv88e6xxx: fix usable ports on 88e6020Michael Krummsdorf1-1/+5
The switch has 4 ports with 2 internal PHYs, but ports are numbered up to 6, with ports 0, 1, 5 and 6 being usable. Fixes: 71d94a432a15 ("net: dsa: mv88e6xxx: add support for MV88E6020 switch") Signed-off-by: Michael Krummsdorf <[email protected]> Signed-off-by: Matthias Schiffer <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2024-03-29Merge tag 'thermal-6.9-rc2' of ↵Linus Torvalds2-18/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These revert a problematic optimization commit and address a devfreq cooling device issue. Specifics: - Revert thermal core optimization that introduced a functional issue causing a critical trip point to be crossed in some cases (Daniel Lezcano) - Add missing conversion between different state ranges to the devfreq cooling device driver (Ye Zhang)" * tag 'thermal-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: devfreq_cooling: Fix perf state when calculate dfc res_util Revert "thermal: core: Don't update trip points inside the hysteresis range"
2024-03-29Merge tag 'acpi-6.9-rc2' of ↵Linus Torvalds2-3/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fixes from Rafael Wysocki: "These fix two issues that may lead to attempts to use memory that has been freed already. Specifics: - Drop __exit annotation from einj_remove() in the ACPI APEI code because this function can be called during runtime (Arnd Bergmann) - Make acpi_db_walk_for_fields() check acpi_evaluate_object() return value to avoid accessing memory that has been freed (Nikita Kiryushin)" * tag 'acpi-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields() ACPI: APEI: EINJ: mark remove callback as non-__exit
2024-03-29mm: clean up populate_vma_page_range() FOLL_* flag handlingLinus Torvalds1-6/+8
The code wasn't exactly wrong, but it was very odd, and it used FOLL_FORCE together with FOLL_WRITE when it really didn't need to (it only set FOLL_WRITE for writable mappings, so then the FOLL_FORCE was pointless). It also pointlessly called __get_user_pages() even when it knew it wouldn't populate anything because the vma wasn't accessible and it explicitly tested for and did *not* set FOLL_FORCE for inaccessible vma's. This code does need to use FOLL_FORCE, because we want to do fault in writable shared mappings, but then the mapping may not actually be readable. And we don't want to use FOLL_WRITE (which would match the permission of the vma), because that would also dirty the pages, which we don't want to do. For very similar reasons, FOLL_FORCE populates a executable-only mapping with no read permissions. We don't have a FOLL_EXEC flag. Yes, it would probably be cleaner to split FOLL_WRITE into two bits (for separate permission and dirty bit handling), and add a FOLL_EXEC flag for the "GUP executable page" case. That would allow us to avoid FOLL_FORCE entirely here. But that's not how our FOLL_xyz bits have traditionally worked, and that would be a much bigger patch. So this at least avoids the FOLL_FORCE | FOLL_WRITE combination that made one of my experimental validation patches trigger a warning. That warning was a false positive (and my experimental patch was incomplete anyway), but it all made me look at this and decide to clean at least this small case up. Signed-off-by: Linus Torvalds <[email protected]>
2024-03-29Merge branch 'acpica'Rafael J. Wysocki1-2/+6
* acpica: ACPICA: debugger: check status of acpi_evaluate_object() in acpi_db_walk_for_fields()
2024-03-29Merge tag 'efi-fixes-for-v6.9-3' of ↵Linus Torvalds3-6/+17
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: "These address all the outstanding EFI/x86 boot related regressions: - Revert to the old initrd memory allocation soft limit of INT_MAX, which was dropped inadvertently - Ensure that startup_32() is entered with a valid boot_params pointer when using the new EFI mixed mode protocol - Fix a compiler warning introduced by a fix from the previous pull" * tag 'efi-fixes-for-v6.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: x86/efistub: Reinstate soft limit for initrd loading efi/libstub: Cast away type warning in use of max() x86/efistub: Add missing boot_params for mixed mode compat entry
2024-03-29Merge tag 'block-6.9-20240329' of git://git.kernel.dk/linuxLinus Torvalds4-11/+4
Pull block fixes from Jens Axboe: "Small round of minor fixes or cleanups for the 6.9-rc2 kernel, one fixing an issue introduced in 6.8" * tag 'block-6.9-20240329' of git://git.kernel.dk/linux: block: Do not force full zone append completion in req_bio_endio() block: don't reject too large max_user_sectors in blk_validate_limits block: Make blk_rq_set_mixed_merge() static
2024-03-29Merge tag 'for-6.9/dm-fixes-2' of ↵Linus Torvalds3-27/+9
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix MAINTAINERS to not include M: dm-devel for DM entries. - Fix DM vdo's murmurhash to use proper byteswapping methods. - Fix DM integrity clang warning about comparison out-of-range. * tag 'for-6.9/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm integrity: fix out-of-range warning dm vdo murmurhash3: use kernel byteswapping routines instead of GCC ones MAINTAINERS: Remove incorrect M: tag for [email protected]
Powered by cgit, Gruvboxed by Blaster4385.