aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-10-12KVM: selftests: Force load all supported XSAVE state in state testSean Christopherson2-0/+23
Extend x86's state to forcefully load *all* host-supported xfeatures by modifying xstate_bv in the saved state. Stuffing xstate_bv ensures that the selftest is verifying KVM's full ABI regardless of whether or not the guest code is successful in getting various xfeatures out of their INIT state, e.g. see the disaster that is/was MPX. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-10-12KVM: selftests: Load XSAVE state into untouched vCPU during state testSean Christopherson1-2/+17
Expand x86's state test to load XSAVE state into a "dummy" vCPU prior to KVM_SET_CPUID2, and again with an empty guest CPUID model. Except for off-by-default features, i.e. AMX, KVM's ABI for KVM_SET_XSAVE is that userspace is allowed to load xfeatures so long as they are supported by the host. This is a regression test for a combination of KVM bugs where the state saved by KVM_GET_XSAVE{2} could not be loaded via KVM_SET_XSAVE if the saved xstate_bv would load guest-unsupported xfeatures. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-10-12KVM: selftests: Touch relevant XSAVE state in guest for state testSean Christopherson2-0/+91
Modify support XSAVE state in the "state test's" guest code so that saving and loading state via KVM_{G,S}ET_XSAVE actually does something useful, i.e. so that xstate_bv in XSAVE state isn't empty. Punt on BNDCSR for now, it's easier to just stuff that xfeature from the host side. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-10-12KVM: x86: Constrain guest-supported xfeatures only at KVM_GET_XSAVE{2}Sean Christopherson3-14/+17
Mask off xfeatures that aren't exposed to the guest only when saving guest state via KVM_GET_XSAVE{2} instead of modifying user_xfeatures directly. Preserving the maximal set of xfeatures in user_xfeatures restores KVM's ABI for KVM_SET_XSAVE, which prior to commit ad856280ddea ("x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0") allowed userspace to load xfeatures that are supported by the host, irrespective of what xfeatures are exposed to the guest. There is no known use case where userspace *intentionally* loads xfeatures that aren't exposed to the guest, but the bug fixed by commit ad856280ddea was specifically that KVM_GET_SAVE{2} would save xfeatures that weren't exposed to the guest, e.g. would lead to userspace unintentionally loading guest-unsupported xfeatures when live migrating a VM. Restricting KVM_SET_XSAVE to guest-supported xfeatures is especially problematic for QEMU-based setups, as QEMU has a bug where instead of terminating the VM if KVM_SET_XSAVE fails, QEMU instead simply stops loading guest state, i.e. resumes the guest after live migration with incomplete guest state, and ultimately results in guest data corruption. Note, letting userspace restore all host-supported xfeatures does not fix setups where a VM is migrated from a host *without* commit ad856280ddea, to a target with a subset of host-supported xfeatures. However there is no way to safely address that scenario, e.g. KVM could silently drop the unsupported features, but that would be a clear violation of KVM's ABI and so would require userspace to opt-in, at which point userspace could simply be updated to sanitize the to-be-loaded XSAVE state. Reported-by: Tyler Stachecki <[email protected]> Closes: https://lore.kernel.org/all/[email protected] Fixes: ad856280ddea ("x86/kvm/fpu: Limit guest user_xfeatures to supported bits of XCR0") Cc: [email protected] Cc: Leonardo Bras <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Acked-by: Dave Hansen <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-10-12x86/fpu: Allow caller to constrain xfeatures when copying to uabi bufferSean Christopherson5-18/+21
Plumb an xfeatures mask into __copy_xstate_to_uabi_buf() so that KVM can constrain which xfeatures are saved into the userspace buffer without having to modify the user_xfeatures field in KVM's guest_fpu state. KVM's ABI for KVM_GET_XSAVE{2} is that features that are not exposed to guest must not show up in the effective xstate_bv field of the buffer. Saving only the guest-supported xfeatures allows userspace to load the saved state on a different host with a fewer xfeatures, so long as the target host supports the xfeatures that are exposed to the guest. KVM currently sets user_xfeatures directly to restrict KVM_GET_XSAVE{2} to the set of guest-supported xfeatures, but doing so broke KVM's historical ABI for KVM_SET_XSAVE, which allows userspace to load any xfeatures that are supported by the *host*. Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2023-10-12Merge tag 'kvm-s390-master-6.6-1' of ↵Paolo Bonzini1-10/+6
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD One small fix for gisa to avoid stalls.
2023-10-12smb: client: prevent new fids from being removed by laundromatPaulo Alcantara1-21/+35
Check if @cfid->time is set in laundromat so we guarantee that only fully cached fids will be selected for removal. While we're at it, add missing locks to protect access of @cfid fields in order to avoid races with open_cached_dir() and cfids_laundromat_worker(), respectively. Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Reviewed-by: Shyam Prasad N <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-10-12smb: client: make laundromat a delayed workerPaulo Alcantara2-55/+36
By having laundromat kthread processing cached directories on every second turned out to be overkill, especially when having multiple SMB mounts. Relax it by using a delayed worker instead that gets scheduled on every @dir_cache_timeout (default=30) seconds per tcon. This also fixes the 1s delay when tearing down tcon. Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Reviewed-by: Shyam Prasad N <[email protected]> Signed-off-by: Steve French <[email protected]>
2023-10-12riscv: signal: fix sigaltstack frame size checkingAndy Chiu1-7/+0
The alternative stack checking in get_sigframe introduced by the Vector support is not needed and has a problem. It is not needed as we have already validate it at the beginning of the function if we are already on an altstack. If not, the size of an altstack is always validated at its allocation stage with sigaltstack_size_valid(). Besides, we must only regard the size of an altstack if the handler of a signal is registered with SA_ONSTACK. So, blindly checking overflow of an altstack if sas_ss_size not equals to zero will check against wrong signal handlers if only a subset of signals are registered with SA_ONSTACK. Fixes: 8ee0b41898fa ("riscv: signal: Add sigcontext save/restore for vector") Reported-by: Prashanth Swaminathan <[email protected]> Signed-off-by: Andy Chiu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Palmer Dabbelt <[email protected]>
2023-10-12IXP4xx MAINTAINERS entriesKrzysztof Hałasa1-17/+8
Update MAINTAINERS entries for Intel IXP4xx SoCs. Linus has been handling all IXP4xx stuff since 2019 or so. Signed-off-by: Krzysztof Hałasa <[email protected]> Acked-by: Linus Walleij <[email protected]> Acked-by: Deepak Saxena <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2023-10-12Merge branch 'rswitch-fix-issues-on-specific-conditions'Paolo Abeni1-5/+7
Yoshihiro Shimoda says: ==================== rswitch: Fix issues on specific conditions This patch series fix some issues of rswitch driver on specific condtions. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-10-12rswitch: Fix imbalance phy_power_off() callingYoshihiro Shimoda1-1/+1
The phy_power_off() should not be called if phy_power_on() failed. So, add a condition .power_count before calls phy_power_off(). Fixes: 5cb630925b49 ("net: renesas: rswitch: Add phy_power_{on,off}() calling") Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-10-12rswitch: Fix renesas_eth_sw_remove() implementationYoshihiro Shimoda1-4/+6
Fix functions calling order and a condition in renesas_eth_sw_remove(). Otherwise, kernel NULL pointer dereference happens from phy_stop() if a net device opens. Fixes: 3590918b5d07 ("net: ethernet: renesas: Add support for "Ethernet Switch"") Signed-off-by: Yoshihiro Shimoda <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2023-10-12drm/tiny: correctly print `struct resource *` on errorJoey Gouly1-1/+1
The `res` variable is already a `struct resource *`, don't take the address of it. Fixes incorrect output: simple-framebuffer 9e20dc000.framebuffer: [drm] *ERROR* could not acquire memory range [??? 0xffff4be88a387d00-0xfffffefffde0a240 flags 0x0]: -16 To be correct: simple-framebuffer 9e20dc000.framebuffer: [drm] *ERROR* could not acquire memory range [mem 0x9e20dc000-0x9e307bfff flags 0x200]: -16 Signed-off-by: Joey Gouly <[email protected]> Fixes: 9a10c7e6519b ("drm/simpledrm: Add support for system memory framebuffers") Cc: Thomas Zimmermann <[email protected]> Cc: Thierry Reding <[email protected]> Cc: Javier Martinez Canillas <[email protected]> Cc: [email protected] Cc: <[email protected]> # v6.3+ Reviewed-by: Thomas Zimmermann <[email protected]> Signed-off-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-10-12drm: Do not overrun array in drm_gem_get_pages()Matthew Wilcox (Oracle)1-2/+4
If the shared memory object is larger than the DRM object that it backs, we can overrun the page array. Limit the number of pages we install from each folio to prevent this. Signed-off-by: "Matthew Wilcox (Oracle)" <[email protected]> Reported-by: Oleksandr Natalenko <[email protected]> Tested-by: Oleksandr Natalenko <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Fixes: 3291e09a4638 ("drm: convert drm_gem_put_pages() to use a folio_batch") Cc: [email protected] # 6.5.x Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2023-10-12netfilter: nft_payload: fix wrong mac header matchingFlorian Westphal1-1/+1
mcast packets get looped back to the local machine. Such packets have a 0-length mac header, we should treat this like "mac header not set" and abort rule evaluation. As-is, we just copy data from the network header instead. Fixes: 96518518cc41 ("netfilter: add nftables") Reported-by: Blažej Krajňák <[email protected]> Signed-off-by: Florian Westphal <[email protected]>
2023-10-12nf_tables: fix NULL pointer dereference in nft_expr_inner_parse()Xingyuan Mo1-1/+1
We should check whether the NFTA_EXPR_NAME netlink attribute is present before accessing it, otherwise a null pointer deference error will occur. Call Trace: <TASK> dump_stack_lvl+0x4f/0x90 print_report+0x3f0/0x620 kasan_report+0xcd/0x110 __asan_load2+0x7d/0xa0 nla_strcmp+0x2f/0x90 __nft_expr_type_get+0x41/0xb0 nft_expr_inner_parse+0xe3/0x200 nft_inner_init+0x1be/0x2e0 nf_tables_newrule+0x813/0x1230 nfnetlink_rcv_batch+0xec3/0x1170 nfnetlink_rcv+0x1e4/0x220 netlink_unicast+0x34e/0x4b0 netlink_sendmsg+0x45c/0x7e0 __sys_sendto+0x355/0x370 __x64_sys_sendto+0x84/0xa0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching") Signed-off-by: Xingyuan Mo <[email protected]> Signed-off-by: Florian Westphal <[email protected]>
2023-10-12nf_tables: fix NULL pointer dereference in nft_inner_init()Xingyuan Mo1-0/+1
We should check whether the NFTA_INNER_NUM netlink attribute is present before accessing it, otherwise a null pointer deference error will occur. Call Trace: dump_stack_lvl+0x4f/0x90 print_report+0x3f0/0x620 kasan_report+0xcd/0x110 __asan_load4+0x84/0xa0 nft_inner_init+0x128/0x2e0 nf_tables_newrule+0x813/0x1230 nfnetlink_rcv_batch+0xec3/0x1170 nfnetlink_rcv+0x1e4/0x220 netlink_unicast+0x34e/0x4b0 netlink_sendmsg+0x45c/0x7e0 __sys_sendto+0x355/0x370 __x64_sys_sendto+0x84/0xa0 do_syscall_64+0x3f/0x90 entry_SYSCALL_64_after_hwframe+0x6e/0xd8 Fixes: 3a07327d10a0 ("netfilter: nft_inner: support for inner tunnel header matching") Signed-off-by: Xingyuan Mo <[email protected]> Signed-off-by: Florian Westphal <[email protected]>
2023-10-12netfilter: nf_tables: do not refresh timeout when resetting elementPablo Neira Ayuso1-13/+5
The dump and reset command should not refresh the timeout, this command is intended to allow users to list existing stateful objects and reset them, element expiration should be refresh via transaction instead with a specific command to achieve this, otherwise this is entering combo semantics that will be hard to be undone later (eg. a user asking to retrieve counters but _not_ requiring to refresh expiration). Fixes: 079cd633219d ("netfilter: nf_tables: Introduce NFT_MSG_GETSETELEM_RESET") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Florian Westphal <[email protected]>
2023-10-12netfilter: nf_tables: Annotate struct nft_pipapo_match with __counted_byKees Cook1-1/+1
Prepare for the coming implementation by GCC and Clang of the __counted_by attribute. Flexible array members annotated with __counted_by can have their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family functions). As found with Coccinelle[1], add __counted_by for struct nft_pipapo_match. Cc: Pablo Neira Ayuso <[email protected]> Cc: Jozsef Kadlecsik <[email protected]> Cc: Florian Westphal <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://github.com/kees/kernel-tools/blob/trunk/coccinelle/examples/counted_by.cocci [1] Signed-off-by: Kees Cook <[email protected]> Reviewed-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Florian Westphal <[email protected]>
2023-10-12netfilter: nfnetlink_log: silence bogus compiler warningFlorian Westphal1-1/+1
net/netfilter/nfnetlink_log.c:800:18: warning: variable 'ctinfo' is uninitialized The warning is bogus, the variable is only used if ct is non-NULL and always initialised in that case. Init to 0 too to silence this. Reported-by: kernel test robot <[email protected]> Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/ Signed-off-by: Florian Westphal <[email protected]>
2023-10-12netfilter: nf_tables: do not remove elements if set backend implements .abortPablo Neira Ayuso1-1/+4
pipapo set backend maintains two copies of the datastructure, removing the elements from the copy that is going to be discarded slows down the abort path significantly, from several minutes to few seconds after this patch. Fixes: 212ed75dc5fb ("netfilter: nf_tables: integrate pipapo into commit protocol") Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Florian Westphal <[email protected]>
2023-10-12octeontx2-pf: Fix page pool frag allocation warningRatheesh Kannoth1-0/+1
Since page pool param's "order" is set to 0, will result in below warn message if interface is configured with higher rx buffer size. Steps to reproduce the issue. 1. devlink dev param set pci/0002:04:00.0 name receive_buffer_size \ value 8196 cmode runtime 2. ifconfig eth0 up [ 19.901356] ------------[ cut here ]------------ [ 19.901361] WARNING: CPU: 11 PID: 12331 at net/core/page_pool.c:567 page_pool_alloc_frag+0x3c/0x230 [ 19.901449] pstate: 82401009 (Nzcv daif +PAN -UAO +TCO -DIT +SSBS BTYPE=--) [ 19.901451] pc : page_pool_alloc_frag+0x3c/0x230 [ 19.901453] lr : __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf] [ 19.901460] sp : ffff80000f66b970 [ 19.901461] x29: ffff80000f66b970 x28: 0000000000000000 x27: 0000000000000000 [ 19.901464] x26: ffff800000d15b68 x25: ffff000195b5c080 x24: ffff0002a5a32dc0 [ 19.901467] x23: ffff0001063c0878 x22: 0000000000000100 x21: 0000000000000000 [ 19.901469] x20: 0000000000000000 x19: ffff00016f781000 x18: 0000000000000000 [ 19.901472] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 [ 19.901474] x14: 0000000000000000 x13: ffff0005ffdc9c80 x12: 0000000000000000 [ 19.901477] x11: ffff800009119a38 x10: 4c6ef2e3ba300519 x9 : ffff800000d13844 [ 19.901479] x8 : ffff0002a5a33cc8 x7 : 0000000000000030 x6 : 0000000000000030 [ 19.901482] x5 : 0000000000000005 x4 : 0000000000000000 x3 : 0000000000000a20 [ 19.901484] x2 : 0000000000001080 x1 : ffff80000f66b9d4 x0 : 0000000000001000 [ 19.901487] Call trace: [ 19.901488] page_pool_alloc_frag+0x3c/0x230 [ 19.901490] __otx2_alloc_rbuf+0x60/0xbc [rvu_nicpf] [ 19.901494] otx2_rq_aura_pool_init+0x1c4/0x240 [rvu_nicpf] [ 19.901498] otx2_open+0x228/0xa70 [rvu_nicpf] [ 19.901501] otx2vf_open+0x20/0xd0 [rvu_nicvf] [ 19.901504] __dev_open+0x114/0x1d0 [ 19.901507] __dev_change_flags+0x194/0x210 [ 19.901510] dev_change_flags+0x2c/0x70 [ 19.901512] devinet_ioctl+0x3a4/0x6c4 [ 19.901515] inet_ioctl+0x228/0x240 [ 19.901518] sock_ioctl+0x2ac/0x480 [ 19.901522] __arm64_sys_ioctl+0x564/0xe50 [ 19.901525] invoke_syscall.constprop.0+0x58/0xf0 [ 19.901529] do_el0_svc+0x58/0x150 [ 19.901531] el0_svc+0x30/0x140 [ 19.901533] el0t_64_sync_handler+0xe8/0x114 [ 19.901535] el0t_64_sync+0x1a0/0x1a4 [ 19.901537] ---[ end trace 678c0bf660ad8116 ]--- Fixes: b2e3406a38f0 ("octeontx2-pf: Add support for page pool") Signed-off-by: Ratheesh Kannoth <[email protected]> Reviewed-by: Yunsheng Lin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-10-12nfc: nci: assert requested protocol is validJeremy Cline1-0/+5
The protocol is used in a bit mask to determine if the protocol is supported. Assert the provided protocol is less than the maximum defined so it doesn't potentially perform a shift-out-of-bounds and provide a clearer error for undefined protocols vs unsupported ones. Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Reported-and-tested-by: [email protected] Closes: https://syzkaller.appspot.com/bug?extid=0839b78e119aae1fec78 Signed-off-by: Jeremy Cline <[email protected]> Reviewed-by: Simon Horman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-10-12af_packet: Fix fortified memcpy() without flex array.Kuniyuki Iwashima2-6/+7
Sergei Trofimovich reported a regression [0] caused by commit a0ade8404c3b ("af_packet: Fix warning of fortified memcpy() in packet_getname()."). It introduced a flex array sll_addr_flex in struct sockaddr_ll as a union-ed member with sll_addr to work around the fortified memcpy() check. However, a userspace program uses a struct that has struct sockaddr_ll in the middle, where a flex array is illegal to exist. include/linux/if_packet.h:24:17: error: flexible array member 'sockaddr_ll::<unnamed union>::<unnamed struct>::sll_addr_flex' not at end of 'struct packet_info_t' 24 | __DECLARE_FLEX_ARRAY(unsigned char, sll_addr_flex); | ^~~~~~~~~~~~~~~~~~~~ To fix the regression, let's go back to the first attempt [1] telling memcpy() the actual size of the array. Reported-by: Sergei Trofimovich <[email protected]> Closes: https://github.com/NixOS/nixpkgs/pull/252587#issuecomment-1741733002 [0] Link: https://lore.kernel.org/netdev/[email protected]/ [1] Fixes: a0ade8404c3b ("af_packet: Fix warning of fortified memcpy() in packet_getname().") Signed-off-by: Kuniyuki Iwashima <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-10-12pinctrl: renesas: rzn1: Enable missing PINMUXRalph Siemsen1-0/+1
Enable pin muxing (eg. programmable function), so that the RZ/N1 GPIO pins will be configured as specified by the pinmux in the DTS. This used to be enabled implicitly via CONFIG_GENERIC_PINMUX_FUNCTIONS, however that was removed, since the RZ/N1 driver does not call any of the generic pinmux functions. Fixes: 1308fb4e4eae14e6 ("pinctrl: rzn1: Do not select GENERIC_PIN{CTRL_GROUPS,MUX_FUNCTIONS}") Signed-off-by: Ralph Siemsen <[email protected]> Reviewed-by: Miquel Raynal <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2023-10-12xfs: reinstate the old i_version counter as STATX_CHANGE_COOKIEJeff Layton1-0/+5
The handling of STATX_CHANGE_COOKIE was moved into generic_fillattr in commit 0d72b92883c6 (fs: pass the request_mask to generic_fillattr), but we didn't account for the fact that xfs doesn't call generic_fillattr at all. Make XFS report its i_version as the STATX_CHANGE_COOKIE. Fixes: 0d72b92883c6 (fs: pass the request_mask to generic_fillattr) Signed-off-by: Jeff Layton <[email protected]> Reviewed-by: "Darrick J. Wong" <[email protected]> Signed-off-by: Chandan Babu R <[email protected]>
2023-10-12xfs: Remove duplicate includeJiapeng Chong1-1/+0
./fs/xfs/scrub/xfile.c: xfs_format.h is included more than once. Reported-by: Abaci Robot <[email protected]> Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=6209 Signed-off-by: Jiapeng Chong <[email protected]> Reviewed-by: "Darrick J. Wong" <[email protected]> Signed-off-by: Chandan Babu R <[email protected]>
2023-10-12xfs: correct calculation for agend and blockcountShiyang Ruan1-3/+3
The agend should be "start + length - 1", then, blockcount should be "end + 1 - start". Correct 2 calculation mistakes. Also, rename "agend" to "range_agend" because it's not the end of the AG per se; it's the end of the dead region within an AG's agblock space. Fixes: 5cf32f63b0f4 ("xfs: fix the calculation for "end" and "length"") Signed-off-by: Shiyang Ruan <[email protected]> Reviewed-by: "Darrick J. Wong" <[email protected]> Signed-off-by: Chandan Babu R <[email protected]>
2023-10-12Merge tag 'random-fixes-6.6_2023-10-11' of ↵Chandan Babu R2-1/+8
https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.6-fixesD xfs: random fixes for 6.6 Rollup of a couple of reviewed fixes. Signed-off-by: Darrick J. Wong <[email protected]> Signed-off-by: Chandan Babu R <[email protected]> * tag 'random-fixes-6.6_2023-10-11' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux: xfs: process free extents to busy list in FIFO order xfs: adjust the incore perag block_count when shrinking
2023-10-11net: tcp: fix crashes trying to free half-baked MTU probesJakub Kicinski1-0/+1
tcp_stream_alloc_skb() initializes the skb to use tcp_tsorted_anchor which is a union with the destructor. We need to clean that TCP-iness up before freeing. Fixes: 736013292e3c ("tcp: let tcp_mtu_probe() build headless packets") Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-11Merge tag 'ieee802154-for-net-2023-10-10' of ↵Jakub Kicinski1-14/+3
git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan Stefan Schmidt says: ==================== pull-request: ieee802154 for net 2023-10-10 Just one small fix this time around. Dinghao Liu fixed a potential use-after-free in the ca8210 driver probe function. * tag 'ieee802154-for-net-2023-10-10' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan: ieee802154: ca8210: Fix a potential UAF in ca8210_probe ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-10-11block: Don't invalidate pagecache for invalid falloc modesSarthak Kukreti1-5/+16
Only call truncate_bdev_range() if the fallocate mode is supported. This fixes a bug where data in the pagecache could be invalidated if the fallocate() was called on the block device with an invalid mode. Fixes: 25f4c41415e5 ("block: implement (some of) fallocate for block devices") Cc: [email protected] Reported-by: "Darrick J. Wong" <[email protected]> Signed-off-by: Sarthak Kukreti <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Reviewed-by: "Darrick J. Wong" <[email protected]> Signed-off-by: Mike Snitzer <[email protected]> Fixes: line? I've never seen those wrapped. Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2023-10-11Merge tag 'fs_for_v6.6-rc6' of ↵Linus Torvalds3-29/+43
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs Pull quota regression fix from Jan Kara. * tag 'fs_for_v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs: quota: Fix slow quotaoff
2023-10-11Merge tag 'for-6.6-rc5-tag' of ↵Linus Torvalds3-6/+2
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A revert of recent mount option parsing fix, this breaks mounts with security options. The second patch is a flexible array annotation" * tag 'for-6.6-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: add __counted_by for struct btrfs_delayed_item and use struct_size() Revert "btrfs: reject unknown mount options early"
2023-10-11Merge tag 'ata-6.6-rc6' of ↵Linus Torvalds3-19/+84
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata Pull ata fixes from Damien Le Moal: - Three fixes for the pata_parport driver to address a typo in the code, a missing operation implementation and port reset handling in the presence of slave devices (Ondrej) - Fix handling of ATAPI devices reset with the fit3 protocol driver of the pata_parport driver (Ondrej) - A follow up fix for the recent suspend/resume corrections to avoid attempting rescanning on resume the scsi device associated with an ata disk when the request queue of the scsi device is still suspended (in addition to not doing the rescan if the scsi device itself is still suspended) (me) * tag 'ata-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata: scsi: Do not rescan devices with a suspended queue ata: pata_parport: fit3: implement IDE command set registers ata: pata_parport: add custom version of wait_after_reset ata: pata_parport: implement set_devctl ata: pata_parport: fix pata_parport_devchk
2023-10-11Merge tag 'for-linus-2023101101' of ↵Linus Torvalds2-64/+83
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid Pull HID fixes from Benjamin Tissoires: - regression fix for i2c-hid when used on DT platforms (Johan Hovold) - kernel crash fix on removal of the Logitech USB receiver (Hans de Goede) * tag 'for-linus-2023101101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect HID: i2c-hid: fix handling of unpopulated devices
2023-10-11Merge tag 'printk-for-6.6-rc6' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux Pull printk regression fix from Petr Mladek: - Avoid unnecessary wait and try to flush messages before checking pending ones * tag 'printk-for-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: flush consoles before checking progress
2023-10-11xfs: process free extents to busy list in FIFO orderDarrick J. Wong1-1/+2
When we're adding extents to the busy discard list, add them to the tail of the list so that we get FIFO order. For FITRIM commands, this means that we send discard bios sorted in order from longest to shortest, like we did before commit 89cfa899608fc. For transactions that are freeing extents, this puts them in the transaction's busy list in FIFO order as well, which shouldn't make any noticeable difference. Fixes: 89cfa899608fc ("xfs: reduce AGF hold times during fstrim operations") Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2023-10-11xfs: adjust the incore perag block_count when shrinkingDarrick J. Wong1-0/+6
If we reduce the number of blocks in an AG, we must update the incore geometry values as well. Fixes: 0800169e3e2c9 ("xfs: Pre-calculate per-AG agbno geometry") Signed-off-by: Darrick J. Wong <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2023-10-11Bluetooth: Fix a refcnt underflow problem for hci_connZiyang Xuan1-2/+2
Syzbot reports a warning as follows: WARNING: CPU: 1 PID: 26946 at net/bluetooth/hci_conn.c:619 hci_conn_timeout+0x122/0x210 net/bluetooth/hci_conn.c:619 ... Call Trace: <TASK> process_one_work+0x884/0x15c0 kernel/workqueue.c:2630 process_scheduled_works kernel/workqueue.c:2703 [inline] worker_thread+0x8b9/0x1290 kernel/workqueue.c:2784 kthread+0x33c/0x440 kernel/kthread.c:388 ret_from_fork+0x45/0x80 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x11/0x20 arch/x86/entry/entry_64.S:304 </TASK> It is because the HCI_EV_SIMPLE_PAIR_COMPLETE event handler drops hci_conn directly without check Simple Pairing whether be enabled. But the Simple Pairing process can only be used if both sides have the support enabled in the host stack. Add hci_conn_ssp_enabled() for hci_conn in HCI_EV_IO_CAPA_REQUEST and HCI_EV_SIMPLE_PAIR_COMPLETE event handlers to fix the problem. Fixes: 0493684ed239 ("[Bluetooth] Disable disconnect timer during Simple Pairing") Signed-off-by: Ziyang Xuan <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-10-11Bluetooth: hci_sync: always check if connection is alive before deletingPauli Virtanen1-14/+12
In hci_abort_conn_sync it is possible that conn is deleted concurrently by something else, also e.g. when waiting for hdev->lock. This causes double deletion of the conn, so UAF or conn_hash.list corruption. Fix by having all code paths check that the connection is still in conn_hash before deleting it, while holding hdev->lock which prevents any races. Log (when powering off while BAP streaming, occurs rarely): ======================================================================= kernel BUG at lib/list_debug.c:56! ... ? __list_del_entry_valid (lib/list_debug.c:56) hci_conn_del (net/bluetooth/hci_conn.c:154) bluetooth hci_abort_conn_sync (net/bluetooth/hci_sync.c:5415) bluetooth ? __pfx_hci_abort_conn_sync+0x10/0x10 [bluetooth] ? lock_release+0x1d5/0x3c0 ? hci_disconnect_all_sync.constprop.0+0xb2/0x230 [bluetooth] ? __pfx_lock_release+0x10/0x10 ? __kmem_cache_free+0x14d/0x2e0 hci_disconnect_all_sync.constprop.0+0xda/0x230 [bluetooth] ? __pfx_hci_disconnect_all_sync.constprop.0+0x10/0x10 [bluetooth] ? hci_clear_adv_sync+0x14f/0x170 [bluetooth] ? __pfx_set_powered_sync+0x10/0x10 [bluetooth] hci_set_powered_sync+0x293/0x450 [bluetooth] ======================================================================= Fixes: 94d9ba9f9888 ("Bluetooth: hci_sync: Fix UAF in hci_disconnect_all_sync") Signed-off-by: Pauli Virtanen <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-10-11Bluetooth: Reject connection with the device which has same BD_ADDRLee, Chun-Yi2-0/+20
This change is used to relieve CVE-2020-26555. The description of the CVE: Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification 1.0B through 5.2 may permit an unauthenticated nearby device to spoof the BD_ADDR of the peer device to complete pairing without knowledge of the PIN. [1] The detail of this attack is in IEEE paper: BlueMirror: Reflections on Bluetooth Pairing and Provisioning Protocols [2] It's a reflection attack. The paper mentioned that attacker can induce the attacked target to generate null link key (zero key) without PIN code. In BR/EDR, the key generation is actually handled in the controller which is below HCI. A condition of this attack is that attacker should change the BR_ADDR of his hacking device (Host B) to equal to the BR_ADDR with the target device being attacked (Host A). Thus, we reject the connection with device which has same BD_ADDR both on HCI_Create_Connection and HCI_Connection_Request to prevent the attack. A similar implementation also shows in btstack project. [3][4] Cc: [email protected] Link: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-26555 [1] Link: https://ieeexplore.ieee.org/abstract/document/9474325/authors#authors [2] Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L3523 [3] Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L7297 [4] Signed-off-by: Lee, Chun-Yi <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-10-11Bluetooth: hci_event: Ignore NULL link keyLee, Chun-Yi1-0/+9
This change is used to relieve CVE-2020-26555. The description of the CVE: Bluetooth legacy BR/EDR PIN code pairing in Bluetooth Core Specification 1.0B through 5.2 may permit an unauthenticated nearby device to spoof the BD_ADDR of the peer device to complete pairing without knowledge of the PIN. [1] The detail of this attack is in IEEE paper: BlueMirror: Reflections on Bluetooth Pairing and Provisioning Protocols [2] It's a reflection attack. The paper mentioned that attacker can induce the attacked target to generate null link key (zero key) without PIN code. In BR/EDR, the key generation is actually handled in the controller which is below HCI. Thus, we can ignore null link key in the handler of "Link Key Notification event" to relieve the attack. A similar implementation also shows in btstack project. [3] v3: Drop the connection when null link key be detected. v2: - Used Link: tag instead of Closes: - Used bt_dev_dbg instead of BT_DBG - Added Fixes: tag Cc: [email protected] Fixes: 55ed8ca10f35 ("Bluetooth: Implement link key handling for the management interface") Link: https://cve.mitre.org/cgi-bin/cvename.cgi?name=CVE-2020-26555 [1] Link: https://ieeexplore.ieee.org/abstract/document/9474325/authors#authors [2] Link: https://github.com/bluekitchen/btstack/blob/master/src/hci.c#L3722 [3] Signed-off-by: Lee, Chun-Yi <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-10-11Bluetooth: ISO: Fix invalid context errorIulia Tanasescu1-3/+12
This moves the hci_le_terminate_big_sync call from rx_work to cmd_sync_work, to avoid calling sleeping function from an invalid context. Reported-by: [email protected] Fixes: a0bfde167b50 ("Bluetooth: ISO: Add support for connecting multiple BISes") Signed-off-by: Iulia Tanasescu <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-10-11Bluetooth: vhci: Fix race when opening vhci deviceArkadiusz Bokowy1-0/+3
When the vhci device is opened in the two-step way, i.e.: open device then write a vendor packet with requested controller type, the device shall respond with a vendor packet which includes HCI index of created interface. When the virtual HCI is created, the host sends a reset request to the controller. This request is processed by the vhci_send_frame() function. However, this request is send by a different thread, so it might happen that this HCI request will be received before the vendor response is queued in the read queue. This results in the HCI vendor response and HCI reset request inversion in the read queue which leads to improper behavior of btvirt: > dmesg [1754256.640122] Bluetooth: MGMT ver 1.22 [1754263.023806] Bluetooth: MGMT ver 1.22 [1754265.043775] Bluetooth: hci1: Opcode 0x c03 failed: -110 In order to synchronize vhci two-step open/setup process with virtual HCI initialization, this patch adds internal lock when queuing data in the vhci_send_frame() function. Signed-off-by: Arkadiusz Bokowy <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2023-10-11ASoC: cs42l42: Fix missing include of gpio/consumer.hRichard Fitzgerald1-0/+1
The call to gpiod_set_value_cansleep() in cs42l42_sdw_update_status() needs the header file gpio/consumer.h to be included. This was introduced by commit 2d066c6a7865 ("ASoC: cs42l42: Avoid stale SoundWire ATTACH after hard reset") and caused error: sound/soc/codecs/cs42l42-sdw.c:374:4: error: implicit declaration of function ‘gpiod_set_value_cansleep’; did you mean gpio_set_value_cansleep’? Signed-off-by: Richard Fitzgerald <[email protected]> Fixes: 2d066c6a7865 ("ASoC: cs42l42: Avoid stale SoundWire ATTACH after hard reset") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2023-10-11NFS: Fix potential oops in nfs_inode_remove_request()Scott Mayhew1-1/+3
Once a folio's private data has been cleared, it's possible for another process to clear the folio->mapping (e.g. via invalidate_complete_folio2 or evict_mapping_folio), so it wouldn't be safe to call nfs_page_to_inode() after that. Fixes: 0c493b5cf16e ("NFS: Convert buffered writes to use folios") Signed-off-by: Scott Mayhew <[email protected]> Reviewed-by: Benjamin Coddington <[email protected]> Tested-by: Benjamin Coddington <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Anna Schumaker <[email protected]>
2023-10-11net: rfkill: reduce data->mtx scope in rfkill_fop_openJohannes Berg1-3/+2
In syzbot runs, lockdep reports that there's a (potential) deadlock here of data->mtx being locked recursively. This isn't really a deadlock since they are different instances, but lockdep cannot know, and teaching it would be far more difficult than other fixes. At the same time we don't even really _need_ the mutex to be locked in rfkill_fop_open(), since we're modifying only a completely fresh instance of 'data' (struct rfkill_data) that's not yet added to the global list. However, to avoid any reordering etc. within the globally locked section, and to make the code look more symmetric, we should still lock the data->events list manipulation, but also need to lock _only_ that. So do that. Reported-by: [email protected] Fixes: 2c3dfba4cf84 ("rfkill: sync before userspace visibility/changes") Signed-off-by: Johannes Berg <[email protected]>
2023-10-11net: rfkill: gpio: prevent value glitch during probeJosua Mayer1-2/+2
When either reset- or shutdown-gpio have are initially deasserted, e.g. after a reboot - or when the hardware does not include pull-down, there will be a short toggle of both IOs to logical 0 and back to 1. It seems that the rfkill default is unblocked, so the driver should not glitch to output low during probe. It can lead e.g. to unexpected lte modem reconnect: [1] root@localhost:~# dmesg | grep "usb 2-1" [ 2.136124] usb 2-1: new SuperSpeed USB device number 2 using xhci-hcd [ 21.215278] usb 2-1: USB disconnect, device number 2 [ 28.833977] usb 2-1: new SuperSpeed USB device number 3 using xhci-hcd The glitch has been discovered on an arm64 board, now that device-tree support for the rfkill-gpio driver has finally appeared :). Change the flags for devm_gpiod_get_optional from GPIOD_OUT_LOW to GPIOD_ASIS to avoid any glitches. The rfkill driver will set the intended value during rfkill_sync_work. Fixes: 7176ba23f8b5 ("net: rfkill: add generic gpio rfkill driver") Signed-off-by: Josua Mayer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.