aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-02-02qeth: allow HiperSockets framesize change in suspendUrsula Braun1-1/+9
For HiperSockets the framesize-definition determines the selected mtu-size and the size of the allocated qdio buffers. A framesize-change may occur while a Linux system with probed HiperSockets device is in suspend state. This patch enables proper resuming of a HiperSockets device in this case. Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: Frank Blaschka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-02-02qeth: add more strict MTU checkingFrank Blaschka1-31/+4
HiperSockets and OSA hardware report a maximum MTU size. Add checking to reject larger MTUs than allowed by hardware. Signed-off-by: Frank Blaschka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-02-02qeth: show new mac-address if its setting failsUrsula Braun1-2/+2
Setting of a MAC-address may fail because an already used MAC-address is to bet set or because of authorization problems. In those cases qeth issues a message, but the mentioned MAC-address is not the new MAC-address to be set, but the actual MAC-address. This patch chooses now the new MAC-address to be set for the error messages. Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: Frank Blaschka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-02-02gro: reset skb_iif on reuseAndy Gospodarek1-0/+1
Like Herbert's change from a few days ago: 66c46d741e2e60f0e8b625b80edb0ab820c46d7a gro: Reset dev pointer on reuse this may not be necessary at this point, but we should still clean up the skb->skb_iif. If not we may end up with an invalid valid for skb->skb_iif when the skb is reused and the check is done in __netif_receive_skb. Signed-off-by: Andy Gospodarek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-02-02mac80211: fix TX status cookie in HW offload caseJohannes Berg3-2/+9
When the off-channel TX is done with remain-on-channel offloaded to hardware, the reported cookie is wrong as in that case we shouldn't use the SKB as the cookie but need to instead use the corresponding r-o-c cookie (XOR'ed with 2 to prevent API mismatches). Fix this by keeping track of the hw_roc_skb pointer just for the status processing and use the correct cookie to report in this case. We can't use the hw_roc_skb pointer itself because it is NULL'ed when the frame is transmitted to prevent it being used twice. This fixes a bug where the P2P state machine in the supplicant gets stuck because it never gets a correct result for its transmitted frame. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-02-02iwlagn: overwrite EEPROM chain setting for 6250 devicesWey-Yi Guy1-0/+2
6250 2x2 devices have 2 tx chain and 2 rx chain. For some reason, the EEPROM contain incorrect information and indicate it only has single tx chain. overwrite it with .cfg parameter to make sure both chain 'A' and chain 'B' can be used for transmit and receive Signed-off-by: Wey-Yi Guy <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-02-02genirq: Prevent irq storm on migrationThomas Gleixner1-3/+11
move_native_irq() masks and unmasks the interrupt line unconditionally, but the interrupt line might be masked due to a threaded oneshot handler in progress. Unmasking the line in that case can lead to interrupt storms. Observed on PREEMPT_RT. Originally-from: Ingo Molnar <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected]
2011-02-02ASoC: fill in snd_soc_pcm_runtime.card before calling snd_soc_dai_link.init()Janusz Krzysztofik1-1/+1
The .card member of the snd_soc_pcm_runtime structure pointed to by the snd_soc_dai_link.init() argument used to be initialized before the function being called. This has changed, probably unintentionally, after recent refactorings. Since the function implementations are free to make use of this pointer, move its assignment back before the function is called to avoid NULL pointer dereferences. Created and tested on Amstrad Delta againts linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2011-02-02arm: omap4: panda: remove usb_nop_xceiv_register(v1)Ming Lei1-2/+0
Panda uses both twl6030 otg phy(vbus, id) and internal phy(data lines, DP/DM), so removes usb_nop_xceiv_register to make twl6030 otg driver working since current otg code only supports one global transceiver. Otherwise, musb doesn't work without the remove. Reviewd-by: Felipe Balbi <[email protected]> Signed-off-by: Ming Lei <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2011-02-02OMAP1: Fix non-working LCD on OMAP310Marek Vasut1-12/+12
This patch fixes bug introduced in revision: f8e9e98454606e43b728269de21db349f57861c7 omap1: DMA: move LCD related code from plat-omap to mach-omap1 The code introduced by this patch didn't consider any other CPUs but OMAP1510, which rendered OMAP310 -- which has the same LCD controller -- non-working. Use cpu_is_omap15xx() instead of cpu_is_omap1510() to squash this issue. Bug found on Palm Zire 71 hardware. Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2011-02-02ALSA: use linux/io.h to fix compile warningsTakashi Iwai3-4/+3
For helping to reduce Greert's regression list... src/sound/drivers/mtpav.c: error: implicit declaration of function 'inb' src/sound/drivers/mtpav.c: error: implicit declaration of function 'outb' ... Signed-off-by: Takashi Iwai <[email protected]>
2011-02-02ALSA: hda - Fix memory leaks in conexant jack arraysTakashi Iwai1-1/+7
The Conexant codec driver adds the jack arrays in init callback which may be called also in each PM resume. This results in the addition of new jack element at each time. The fix is to check whether the requested jack is already present in the array. Reference: Novell bug 668929 https://bugzilla.novell.com/show_bug.cgi?id=668929 Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2011-02-02drm/i915: Invalidate TLB caches on SNB BLT/BSD ringsChris Wilson2-11/+19
Signed-off-by: Chris Wilson <[email protected]> Cc: [email protected]
2011-02-02drm/radeon: remove 0x4243 pci idAlex Deucher1-1/+0
0x4243 is a PCI bridge, not a GPU. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=33815 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-02-02drm/radeon/kms: Enable new pll calculation for avivo+ asicsAlex Deucher3-12/+19
New algo is used for r5xx+ and legacy is used for r1xx-r4xx, rv515. I've tested on all relevant GPUs and monitors that I have access to and have found no problems. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=26562 https://bugzilla.kernel.org/show_bug.cgi?id=26552 May fix: https://bugs.freedesktop.org/show_bug.cgi?id=32556 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-02-02drm/radeon/kms: add new pll algo for avivo asicsAlex Deucher4-19/+137
Based on the vbios code. This should hopefully fix the pll problems on a number of avivo asics once it's enabled. Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-02-02drm/radeon/kms: add pll debugging outputAlex Deucher1-0/+4
Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-02-02drm/radeon/kms: switch back to min->max pll post divider iterationAlex Deucher1-1/+1
Seems more reliable. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=26552 Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-02-02drm/radeon/kms: rv6xx+ thermal sensor fixesAlex Deucher5-25/+37
Some fixes to the thermal sensor code: - handle negative numbers - properly handle temp calculation on different asics Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2011-02-02Merge remote branch 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next ↵Dave Airlie2-3/+2
into drm-fixes * 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next: drm/nv50: fix display on 0x50 drm/nouveau: correctly pair hwmon_init and hwmon_fini
2011-02-02Merge remote branch 'intel/drm-intel-fixes' of /ssd/git/drm-next into drm-fixesDave Airlie10-44/+104
* 'intel/drm-intel-fixes' of /ssd/git/drm-next: drm/i915: Only bind to function 0 of the PCI device drm/i915: Suppress spurious vblank interrupts drm: Avoid leak of adjusted mode along quick set_mode paths drm: Simplify and defend later checks when disabling a crtc drm: Don't switch fb when disabling an output drm/i915: Reset crtc after resume drm/i915/crt: Force the initial probe after reset drm/i915: Reset state after a GPU reset or resume drm: Add an interface to reset the device drm/i915/sdvo: If at first we don't succeed in reading the response, wait
2011-02-02md: Don't allow slot_store while resync/recovery is happening.NeilBrown1-0/+3
Activating a spare in an array while resync/recovery is already happening can lead the that spare being marked in-sync when it isn't really. So don't allow the 'slot' to be set (this activating the device) while resync/recovery is happening. Signed-off-by: NeilBrown <[email protected]>
2011-02-02drm/nv50: fix display on 0x50Ben Skeggs1-2/+1
Accidently busted a while back. We'll be creating objects that aren't necessary here, but, they're never used so no harm.. Signed-off-by: Ben Skeggs <[email protected]>
2011-02-02drm/nouveau: correctly pair hwmon_init and hwmon_finiLucas Stach1-1/+1
I broke this with my commit 07cfe0e7a820ecad078c04e9c2a102521709145d This fixes fdo #33434 Signed-off-by: Lucas Stach <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2011-02-02cifs: fix length vs. total_read confusion in cifs_demultiplex_threadJeff Layton1-5/+5
length at this point is the length returned by the last kernel_recvmsg call. total_read is the length of all of the data read so far. length is more or less meaningless at this point, so use total_read for everything. Signed-off-by: Jeff Layton <[email protected]> Reviewed-by: Pavel Shilovsky <[email protected]> Signed-off-by: Steve French <[email protected]>
2011-02-01OMAP3: Devkit8000: Change lcd power pinThomas Weber1-11/+16
This patch fixes a wrongly used lcd enable pin. The Devkit8000 uses twl4030_ledA configured as output gpio only for the lcd enable line. twl4030_gpio.1 is used through the generic gpio functions while ledA is used via low level twl4030 calls. This patch removes the low level calls and use the generic gpio functions for initialization and use of ledA. This patch also fixes a bug where the lcd would not power down when blanking. Further this patch fixes an indentation issue. The comment line uses eight whitespace and is replaced with a hard tab. gpio_request + gpio_direction_output are replaced with gpio_request_one. The return value of gpio_request_one is used to set the value of the gpio to -EINVAL when unsuccessful, so that gpio_is_valid can detect the unsuccessful request. But already successful requested gpios are not freed. Reported-by: Daniel Morsing <[email protected]> Signed-off-by: Thomas Weber <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2011-02-01omap1: remove duplicated #includeHuang Weiyi1-1/+0
Remove duplicated #include('s) in arch/arm/mach-omap1/time.c Signed-off-by: Huang Weiyi <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2011-02-01arm: mach-omap2: mux: free allocated memory on error exitAaro Koskinen1-0/+1
Free allocated memory on error exit. Signed-off-by: Aaro Koskinen <[email protected]> Signed-off-by: Tony Lindgren <[email protected]>
2011-02-01arm: mach-omap2: board-rm680: fix rm680_vemmc regulator constraintsAaro Koskinen1-3/+0
With the commit 757902513019e6ee469791ff76f954b19ca8d036 (regulator: Factor out voltage set operation into a separate function) fixed voltage regulator setup will fail if there are voltage constraints defined. This made MMC unusable on this board. Fix by just deleting those redundant constraints. Signed-off-by: Aaro Koskinen <[email protected]> Reviewed-by: Jarkko Nikula <[email protected]> [[email protected]: updated comments] Signed-off-by: Tony Lindgren <[email protected]>
2011-02-01be2net: remove netif_stop_queue being called before register_netdev.Ajit Khaparde1-2/+0
It is illegal to call netif_stop_queue before register_netdev. Signed-off-by: Ajit Khaparde <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-02-01be2net: fix a crash seen during insmod/rmmod testAjit Khaparde1-2/+0
While running insmod/rmood in a loop, an unnecessary netif_stop_queue causes the system to crash. Remove the netif_stop_queue call and netif_start_queue in the link status update path. Signed-off-by: Ajit Khaparde <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-02-02Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds3-6/+16
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Fix ASM optimized code for LE microblaze: Fix unaligned issue on MMU system with BS=0 DIV=1 microblaze: Fix DTB passing from bootloader
2011-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds11-85/+130
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: fix length checks in checkSMB [CIFS] Update cifs minor version cifs: No need to check crypto blockcipher allocation cifs: clean up some compiler warnings cifs: make CIFS depend on CRYPTO_MD4 cifs: force a reconnect if there are too many MIDs in flight cifs: don't pop a printk when sending on a socket is interrupted cifs: simplify SMB header check routine cifs: send an NT_CANCEL request when a process is signalled cifs: handle cancelled requests better cifs: fix two compiler warning about uninitialized vars
2011-02-02mlock: operate on any regions with protection != PROT_NONEMichel Lespinasse1-0/+7
As Tao Ma noticed, change 5ecfda0 breaks blktrace. This is because blktrace mmaps a file with PROT_WRITE permissions but without PROT_READ, so my attempt to not unnecessarity break COW during mlock ended up causing mlock to fail with a permission problem. I am proposing to let mlock ignore vma protection in all cases except PROT_NONE. In particular, mlock should not fail for PROT_WRITE regions (as in the blktrace case, which broke at 5ecfda0) or for PROT_EXEC regions (which seem to me like they were always broken). Signed-off-by: Michel Lespinasse <[email protected]> Acked-by: Rik van Riel <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-02-02gpu/stub: fix acpi_video build error, fix stub kconfig dependenciesRandy Dunlap1-0/+2
The comments under "config STUB_POULSBO" are close to correct, but they are not being followed. This patch updates them to reflect the requirements for THERMAL. This build error is caused by STUB_POULSBO selecting ACPI_VIDEO when ACPI_VIDEO's config requirements are not met. ERROR: "thermal_cooling_device_register" [drivers/acpi/video.ko] undefined! ERROR: "thermal_cooling_device_unregister" [drivers/acpi/video.ko] undefined! Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-02-01isdn: icn: Fix potentially wrong string handlingStefan Weil1-1/+2
This warning was reported by cppcheck: drivers/isdn/icn/icn.c:1641: error: Dangerous usage of 'rev' (strncpy doesn't always 0-terminate it) If strncpy copied 20 bytes, the destination string rev was not terminated. The patch adds one more byte to rev and makes sure that this byte is always 0. Cc: Karsten Keil <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Stefan Weil <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-02-01bnx2x: multicasts in NPAR modeVladislav Zolotarov1-7/+2
The chip was erroneously configured to accept all multicast frames in a normal (none-promisc) rx mode both on the RSS and on the FCoE L2 rings when in an NPAR mode. This caused packet duplication for every received multicast frame in this mode. Signed-off-by: Vladislav Zolotarov <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-02-01drm/i915: Only bind to function 0 of the PCI deviceChris Wilson1-0/+8
Early chipsets (gen2/3) used function 1 as a placeholder for multi-head. We used to ignore these since they were not assigned to PCI_CLASS_DISPLAY_VGA. However with 934f992c7 we attempt to bind to all Intel PCI_CLASS_DISPLAY devices (and functions) to work in multi-gpu systems. This fails hard on gen2/3. Reported-by: Ferenc Wágner <[email protected]> Tested-by: Ferenc Wágner <[email protected]> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=28012 Signed-off-by: Chris Wilson <[email protected]> Cc: [email protected]
2011-02-01depca: Fix warningsAlan Cox1-3/+3
Replace the rather weird use of ++ with + 1 as the value is being assigned Signed-off-by: Alan Cox <[email protected]>
2011-02-01Merge branch 'master' of ↵David S. Miller10-49/+61
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-02-01Merge branch 'vhost-net' of ↵David S. Miller2-7/+8
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
2011-02-01vxge: Fix wrong boolean operatorStefan Weil1-1/+1
This error is reported by cppcheck: drivers/net/vxge/vxge-config.c:3693: warning: Mutual exclusion over || always evaluates to true. Did you intend to use && instead? It looks like cppcheck is correct, so fix this. No test was run. Cc: Ramkrishna Vepa <[email protected]> Cc: Sivakumar Subramani <[email protected]> Cc: Sreenivasa Honnur <[email protected]> Cc: Jon Mason <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Stefan Weil <[email protected]> Acked-by: Ram Vepa <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-02-01ath9k: Fix memory leak due to failed PAPRD framesMohammed Shafi Shajakhan1-1/+7
free the skb's when the Tx of PAPRD frames fails and also add a debug message indicating that. Signed-off-by: Mohammed Shafi Shajakhan <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2011-02-01netfilter: ecache: always set events bits, filter them laterPablo Neira Ayuso2-3/+3
For the following rule: iptables -I PREROUTING -t raw -j CT --ctevents assured The event delivered looks like the following: [UPDATE] tcp 6 src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED] Note that the TCP protocol state is not included. For that reason the CT event filtering is not very useful for conntrackd. To resolve this issue, instead of conditionally setting the CT events bits based on the ctmask, we always set them and perform the filtering in the late stage, just before the delivery. Thus, the event delivered looks like the following: [UPDATE] tcp 6 432000 ESTABLISHED src=192.168.0.2 dst=192.168.1.2 sport=37041 dport=80 src=192.168.1.2 dst=192.168.1.100 sport=80 dport=37041 [ASSURED] Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Patrick McHardy <[email protected]>
2011-02-01netfilter: arpt_mangle: fix return values of checkentryPablo Neira Ayuso1-3/+3
In 135367b "netfilter: xtables: change xt_target.checkentry return type", the type returned by checkentry was changed from boolean to int, but the return values where not adjusted. arptables: Input/output error This broke arptables with the mangle target since it returns true under success, which is interpreted by xtables as >0, thus returning EIO. Signed-off-by: Pablo Neira Ayuso <[email protected]> Signed-off-by: Patrick McHardy <[email protected]>
2011-02-01vhost: rcu annotation fixupMichael S. Tsirkin2-7/+8
When built with rcu checks enabled, vhost triggers bogus warnings as vhost features are read without dev->mutex sometimes, and private pointer is read with our kind of rcu where work serves as a read side critical section. Fixing it properly is not trivial. Disable the warnings by stubbing out the checks for now. Signed-off-by: Michael S. Tsirkin <[email protected]>
2011-02-01ASoC: CX20442: fix NULL pointer dereferenceJanusz Krzysztofik1-0/+3
The CX20442 codec driver never provided the snd_soc_codec_driver's .reg_cache_default member. With the latest ASoC framework changes, it seems to be referred unconditionally, resulting in a NULL pointer dereference if missing. Provide it. Created and tested on Amstrad Delta against linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik <[email protected]> Acked-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2011-02-01ASoC: Amstrad Delta: fix const related build errorJanusz Krzysztofik1-2/+0
The Amstrad Delta ASoC driver used to override the digital_mute() callback, expected to be not provided by the on-board CX20442 CODEC driver, with its own implementation. While this is still posssible when substituting the whole empty snd_soc_dai_driver.ops member (the CX20442 case), replacing snd_soc_dai_ops.digital_mute only is no longer correct after the snd_soc_dai_driver.ops member has been constified, and results in build error. Drop this actually not used code path in hope the CX20442 driver never provides its own snd_soc_dai_ops structure. Created and tested against linux-2.6.38-rc2 Signed-off-by: Janusz Krzysztofik <[email protected]> Acked-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2011-02-01btrfs: fix return value check of btrfs_start_transaction()Tsutomu Itoh7-6/+37
The error check of btrfs_start_transaction() is added, and the mistake of the error check on several places is corrected. Signed-off-by: Tsutomu Itoh <[email protected]> Signed-off-by: Chris Mason <[email protected]>
2011-02-01btrfs: checking NULL or not in some functionsTsutomu Itoh3-0/+10
Because NULL is returned when the memory allocation fails, it is checked whether it is NULL. Signed-off-by: Tsutomu Itoh <[email protected]> Signed-off-by: Chris Mason <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.