| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The trusted extended attributes are only visible to the process which
hvae CAP_SYS_ADMIN capability but the check is missing in ocfs2
xattr_handler trusted list. The check is important because this will be
used for implementing mechanisms in the userspace for which other
ordinary processes should not have access to.
Signed-off-by: Sanidhya Kashyap <[email protected]>
Reviewed-by: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: Taesoo kim <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In ocfs2_rename, it will lead to an inode with two entried(old and new) if
ocfs2_delete_entry(old) failed. Thus, filesystem will be inconsistent.
The case is described below:
ocfs2_rename
-> ocfs2_start_trans
-> ocfs2_add_entry(new)
-> ocfs2_delete_entry(old)
-> __ocfs2_journal_access *failed* because of -ENOMEM
-> ocfs2_commit_trans
So filesystem should be set to read-only at the moment.
Signed-off-by: Yiwen Jiang <[email protected]>
Cc: Joseph Qi <[email protected]>
Cc: Joel Becker <[email protected]>
Reviewed-by: Mark Fasheh <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Use list_for_each_entry instead of list_for_each to simplify code.
Signed-off-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The last goto statement is unneeded, so remove it.
Signed-off-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
In dlm_register_domain_handlers, if o2hb_register_callback fails, it
will call dlm_unregister_domain_handlers to unregister. This will
trigger the BUG_ON in o2hb_unregister_callback because hc_magic is 0.
So we should call o2hb_setup_callback to initialize hc first.
Signed-off-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
status is already initialized and it will only be 0 or negatives in the
code flow. So remove the unneeded assignment after the lable 'local'.
Signed-off-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Unlocking order in ocfs2_unlink and ocfs2_rename mismatches the
corresponding locking order, although it won't cause issues, adjust the
code so that it looks more reasonable.
Signed-off-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Since commit 86b9c6f3f891 ("ocfs2: remove filesize checks for sync I/O
journal commit") removes filesize checks for sync I/O journal commit,
variables old_size and old_clusters are not actually used any more. So
clean them up.
Signed-off-by: Joseph Qi <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
'o2hb_map_slot_data' and 'o2hb_populate_slot_data' are called from only
one place, in 'o2hb_region_dev_write'. Return value is checked and
'mlog_errno' is called to log a message if it is not 0.
So there is no need to call 'mlog_errno' directly within these functions.
This would result on logging the message twice.
Signed-off-by: Christophe JAILLET <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When storage network is unstable, it may trigger the BUG in
__ocfs2_journal_access because of buffer not uptodate. We can retry the
write in this case or return error instead of BUG.
Signed-off-by: Joseph Qi <[email protected]>
Reported-by: Zhangguanghui <[email protected]>
Tested-by: Zhangguanghui <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
1) Take rw EX lock in case of append dio.
2) Explicitly treat the error code -EIOCBQUEUED as normal.
3) Set di_bh to NULL after brelse if it may be used again later.
Signed-off-by: Joseph Qi <[email protected]>
Cc: Yiwen Jiang <[email protected]>
Cc: Weiwei Wang <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
During direct io the inode will be added to orphan first and then
deleted from orphan. There is a race window that the orphan entry will
be deleted twice and thus trigger the BUG when validating
OCFS2_DIO_ORPHANED_FL in ocfs2_del_inode_from_orphan.
ocfs2_direct_IO_write
...
ocfs2_add_inode_to_orphan
>>>>>>>> race window.
1) another node may rm the file and then down, this node
take care of orphan recovery and clear flag
OCFS2_DIO_ORPHANED_FL.
2) since rw lock is unlocked, it may race with another
orphan recovery and append dio.
ocfs2_del_inode_from_orphan
So take inode mutex lock when recovering orphans and make rw unlock at the
end of aio write in case of append dio.
Signed-off-by: Joseph Qi <[email protected]>
Reported-by: Yiwen Jiang <[email protected]>
Cc: Weiwei Wang <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Replace ((x) >> PAGE_SHIFT) with the predefined PFN_DOWN macro.
Signed-off-by: Alexander Kuleshov <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
iput() tests whether its argument is NULL and then returns immediately.
Thus the test around the call is not needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <[email protected]>
Cc: Julia Lawall <[email protected]>
Reviewed-by: Anton Altaparmakov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
I wrote a small script to show word-pair from all linux spelling-typo
commits, and get following result by sort | uniq -c:
181 occured -> occurred
78 transfered -> transferred
67 recieved -> received
65 dependant -> dependent
58 wether -> whether
56 accomodate -> accommodate
54 occured -> occurred
51 recieve -> receive
47 cant -> can't
40 sucessfully -> successfully
...
Some of them are not in spelling.txt, this patch adds the most common
word-pairs into spelling.txt.
Signed-off-by: Zhao Lei <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix the stack decoder for the ARM architecture.
An ARM stack is designed as :
[ 81.547704] [<c023eb04>] (bucket_find_contain) from [<c023ec88>] (check_sync+0x40/0x4f8)
[ 81.559668] [<c023ec88>] (check_sync) from [<c023f8c4>] (debug_dma_sync_sg_for_cpu+0x128/0x194)
[ 81.571583] [<c023f8c4>] (debug_dma_sync_sg_for_cpu) from [<c0327dec>] (__videobuf_s
The current script doesn't expect the symbols to be bound by
parenthesis, and triggers the following errors :
awk: cmd. line:1: error: Unmatched ( or \(: / (check_sync$/
[ 81.547704] (bucket_find_contain) from (check_sync+0x40/0x4f8)
Fix it by chopping starting and ending parenthesis from the each symbol
name.
As a side note, this probably comes from the function
dump_backtrace_entry(), which is implemented differently for each
architecture. That makes a single decoding script a bit a challenge.
Signed-off-by: Robert Jarzmik <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Russell King <[email protected]>
Cc: Michal Marek <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If indent is not found, bail out immediately instead of spitting random
shell script error messages.
Signed-off-by: Jean Delvare <[email protected]>
Cc: Joe Perches <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Editors like emacs and vi recognize a number of error message formats.
The format used by the kerneldoc tool is not recognized by emacs.
Change the kerneldoc error message format to the GNU style such that the
emacs prev-error and next-error commands can be used to navigate through
kerneldoc error messages. For more information about the GNU error
message format, see also
https://www.gnu.org/prep/standards/html_node/Errors.html.
This patch has been generated via the following sed command:
sed -i.orig 's/Error(\${file}:\$.):/\${file}:\$.: error:/g;s/Warning(\${file}:\$.):/\${file}:\$.: warning:/g;s/Warning(\${file}):/\${file}:1: warning:/g;s/Info(\${file}:\$.):/\${file}:\$.: info:/g' scripts/kernel-doc
Signed-off-by: Bart Van Assche <[email protected]>
Cc: Johannes Berg <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
I just did a spelling mistake of uninitialized and wrote that as
unintialized. Fortunately I noticed it in my final review.
Signed-off-by: Sudip Mukherjee <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
misspelled words for check:-
chcek
chck
cehck
I myself did these spell mistakes in changelog for patches, Thus
suggesting to add in spelling.txt, so that checkpatch.pl warns it
earlier. References:-
./arch/powerpc/kernel/exceptions-64e.S:456: . . . make sure you chcek
https://lkml.org/lkml/2015/6/25/289
./arch/x86/mm/pageattr.c:1368: * No need to cehck in that case
[[email protected]: add whcih->which, whcih I always get wrong]
Signed-off-by: Maninder Singh <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
fsnotify_destroy_mark_locked() is subtle to use because it temporarily
releases group->mark_mutex. To avoid future problems with this
function, split it into two.
fsnotify_detach_mark() is the part that needs group->mark_mutex and
fsnotify_free_mark() is the part that must be called outside of
group->mark_mutex. This way it's much clearer what's going on and we
also avoid some pointless acquisitions of group->mark_mutex.
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Free list is used when all marks on given inode / mount should be
destroyed when inode / mount is going away. However we can free all of
the marks without using a special list with some care.
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
A check in inotify_fdinfo() checking whether mark is valid was always
true due to a bug. Luckily we can never get to invalidated marks since
we hold mark_mutex and invalidated marks get removed from the group list
when they are invalidated under that mutex.
Anyway fix the check to make code more future proof.
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
I have a _tiny_ microbenchmark that sits in a loop and writes single
bytes to a file. Writing one byte to a tmpfs file is around 2x slower
than reading one byte from a file, which is a _bit_ more than I expecte.
This is a dumb benchmark, but I think it's hard to deny that write() is
a hot path and we should avoid unnecessary overhead there.
I did a 'perf record' of 30-second samples of read and write. The top
item in a diffprofile is srcu_read_lock() from fsnotify(). There are
active inotify fd's from systemd, but nothing is actually listening to
the file or its part of the filesystem.
I *think* we can avoid taking the srcu_read_lock() for the common case
where there are no actual marks on the file. This means that there will
both be nothing to notify for *and* implies that there is no need for
clearing the ignore mask.
This patch gave a 13.1% speedup in writes/second on my test, which is an
improvement from the 10.8% that I saw with the last version.
Signed-off-by: Dave Hansen <[email protected]>
Reviewed-by: Jan Kara <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Eric Paris <[email protected]>
Cc: John McCutchan <[email protected]>
Cc: Robert Love <[email protected]>
Cc: Andi Kleen <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Architectures which support VGA console must define screen_info
structurture from "uapi/linux/screen_info.h". Otherwise undefined
symbol error occurs. Usually it's defined in "setup.c" for each
architecture.
If an architecture does not support VGA console (ARC's case) there are 2
ways: define a dummy instance of screen_info or add a negative
dependency for VGA_CONSOLE in to prevent selecting this option.
I've implemented the second way. However the best solution is to add
HAVE_VGA_CONSOLE option for targets which support VGA console. Then
turn off VGA_CONSOLE by default and add dependency to HAVE_VGA_CONSOLE.
But right now it's better to just add a negative dependency for ARC and
then consider how to collaborate about this issue with maintainers of
other architectures.
Signed-off-by: Yuriy Kolerov <[email protected]>
Acked-by: Geert Uytterhoeven <[email protected]>
Cc: Jean-Christophe Plagniol-Villard <[email protected]>
Cc: Tomi Valkeinen <[email protected]>
Cc: Jaya Kumar <[email protected]>
Cc: Vineet Gupta <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Per Andrew Morgan's request, add a securebit to allow admins to disable
PR_CAP_AMBIENT_RAISE. This securebit will prevent processes from adding
capabilities to their ambient set.
For simplicity, this disables PR_CAP_AMBIENT_RAISE entirely rather than
just disabling setting previously cleared bits.
Signed-off-by: Andy Lutomirski <[email protected]>
Acked-by: Andrew G. Morgan <[email protected]>
Acked-by: Serge Hallyn <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Serge Hallyn <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Aaron Jones <[email protected]>
Cc: Ted Ts'o <[email protected]>
Cc: Andrew G. Morgan <[email protected]>
Cc: Mimi Zohar <[email protected]>
Cc: Austin S Hemmelgarn <[email protected]>
Cc: Markku Savela <[email protected]>
Cc: Jarkko Sakkinen <[email protected]>
Cc: Michael Kerrisk <[email protected]>
Cc: James Morris <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This test focuses on ambient capabilities. It requires either root or
the ability to create user namespaces. Some of the test cases will be
skipped for nonroot users.
Signed-off-by: Andy Lutomirski <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Christoph Lameter <[email protected]> # Original author
Cc: Serge E. Hallyn <[email protected]>
Cc: James Morris <[email protected]>
Cc: Shuah Khan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Credit where credit is due: this idea comes from Christoph Lameter with
a lot of valuable input from Serge Hallyn. This patch is heavily based
on Christoph's patch.
===== The status quo =====
On Linux, there are a number of capabilities defined by the kernel. To
perform various privileged tasks, processes can wield capabilities that
they hold.
Each task has four capability masks: effective (pE), permitted (pP),
inheritable (pI), and a bounding set (X). When the kernel checks for a
capability, it checks pE. The other capability masks serve to modify
what capabilities can be in pE.
Any task can remove capabilities from pE, pP, or pI at any time. If a
task has a capability in pP, it can add that capability to pE and/or pI.
If a task has CAP_SETPCAP, then it can add any capability to pI, and it
can remove capabilities from X.
Tasks are not the only things that can have capabilities; files can also
have capabilities. A file can have no capabilty information at all [1].
If a file has capability information, then it has a permitted mask (fP)
and an inheritable mask (fI) as well as a single effective bit (fE) [2].
File capabilities modify the capabilities of tasks that execve(2) them.
A task that successfully calls execve has its capabilities modified for
the file ultimately being excecuted (i.e. the binary itself if that
binary is ELF or for the interpreter if the binary is a script.) [3] In
the capability evolution rules, for each mask Z, pZ represents the old
value and pZ' represents the new value. The rules are:
pP' = (X & fP) | (pI & fI)
pI' = pI
pE' = (fE ? pP' : 0)
X is unchanged
For setuid binaries, fP, fI, and fE are modified by a moderately
complicated set of rules that emulate POSIX behavior. Similarly, if
euid == 0 or ruid == 0, then fP, fI, and fE are modified differently
(primary, fP and fI usually end up being the full set). For nonroot
users executing binaries with neither setuid nor file caps, fI and fP
are empty and fE is false.
As an extra complication, if you execute a process as nonroot and fE is
set, then the "secure exec" rules are in effect: AT_SECURE gets set,
LD_PRELOAD doesn't work, etc.
This is rather messy. We've learned that making any changes is
dangerous, though: if a new kernel version allows an unprivileged
program to change its security state in a way that persists cross
execution of a setuid program or a program with file caps, this
persistent state is surprisingly likely to allow setuid or file-capped
programs to be exploited for privilege escalation.
===== The problem =====
Capability inheritance is basically useless.
If you aren't root and you execute an ordinary binary, fI is zero, so
your capabilities have no effect whatsoever on pP'. This means that you
can't usefully execute a helper process or a shell command with elevated
capabilities if you aren't root.
On current kernels, you can sort of work around this by setting fI to
the full set for most or all non-setuid executable files. This causes
pP' = pI for nonroot, and inheritance works. No one does this because
it's a PITA and it isn't even supported on most filesystems.
If you try this, you'll discover that every nonroot program ends up with
secure exec rules, breaking many things.
This is a problem that has bitten many people who have tried to use
capabilities for anything useful.
===== The proposed change =====
This patch adds a fifth capability mask called the ambient mask (pA).
pA does what most people expect pI to do.
pA obeys the invariant that no bit can ever be set in pA if it is not
set in both pP and pI. Dropping a bit from pP or pI drops that bit from
pA. This ensures that existing programs that try to drop capabilities
still do so, with a complication. Because capability inheritance is so
broken, setting KEEPCAPS, using setresuid to switch to nonroot uids, and
then calling execve effectively drops capabilities. Therefore,
setresuid from root to nonroot conditionally clears pA unless
SECBIT_NO_SETUID_FIXUP is set. Processes that don't like this can
re-add bits to pA afterwards.
The capability evolution rules are changed:
pA' = (file caps or setuid or setgid ? 0 : pA)
pP' = (X & fP) | (pI & fI) | pA'
pI' = pI
pE' = (fE ? pP' : pA')
X is unchanged
If you are nonroot but you have a capability, you can add it to pA. If
you do so, your children get that capability in pA, pP, and pE. For
example, you can set pA = CAP_NET_BIND_SERVICE, and your children can
automatically bind low-numbered ports. Hallelujah!
Unprivileged users can create user namespaces, map themselves to a
nonzero uid, and create both privileged (relative to their namespace)
and unprivileged process trees. This is currently more or less
impossible. Hallelujah!
You cannot use pA to try to subvert a setuid, setgid, or file-capped
program: if you execute any such program, pA gets cleared and the
resulting evolution rules are unchanged by this patch.
Users with nonzero pA are unlikely to unintentionally leak that
capability. If they run programs that try to drop privileges, dropping
privileges will still work.
It's worth noting that the degree of paranoia in this patch could
possibly be reduced without causing serious problems. Specifically, if
we allowed pA to persist across executing non-pA-aware setuid binaries
and across setresuid, then, naively, the only capabilities that could
leak as a result would be the capabilities in pA, and any attacker
*already* has those capabilities. This would make me nervous, though --
setuid binaries that tried to privilege-separate might fail to do so,
and putting CAP_DAC_READ_SEARCH or CAP_DAC_OVERRIDE into pA could have
unexpected side effects. (Whether these unexpected side effects would
be exploitable is an open question.) I've therefore taken the more
paranoid route. We can revisit this later.
An alternative would be to require PR_SET_NO_NEW_PRIVS before setting
ambient capabilities. I think that this would be annoying and would
make granting otherwise unprivileged users minor ambient capabilities
(CAP_NET_BIND_SERVICE or CAP_NET_RAW for example) much less useful than
it is with this patch.
===== Footnotes =====
[1] Files that are missing the "security.capability" xattr or that have
unrecognized values for that xattr end up with has_cap set to false.
The code that does that appears to be complicated for no good reason.
[2] The libcap capability mask parsers and formatters are dangerously
misleading and the documentation is flat-out wrong. fE is *not* a mask;
it's a single bit. This has probably confused every single person who
has tried to use file capabilities.
[3] Linux very confusingly processes both the script and the interpreter
if applicable, for reasons that elude me. The results from thinking
about a script's file capabilities and/or setuid bits are mostly
discarded.
Preliminary userspace code is here, but it needs updating:
https://git.kernel.org/cgit/linux/kernel/git/luto/util-linux-playground.git/commit/?h=cap_ambient&id=7f5afbd175d2
Here is a test program that can be used to verify the functionality
(from Christoph):
/*
* Test program for the ambient capabilities. This program spawns a shell
* that allows running processes with a defined set of capabilities.
*
* (C) 2015 Christoph Lameter <[email protected]>
* Released under: GPL v3 or later.
*
*
* Compile using:
*
* gcc -o ambient_test ambient_test.o -lcap-ng
*
* This program must have the following capabilities to run properly:
* Permissions for CAP_NET_RAW, CAP_NET_ADMIN, CAP_SYS_NICE
*
* A command to equip the binary with the right caps is:
*
* setcap cap_net_raw,cap_net_admin,cap_sys_nice+p ambient_test
*
*
* To get a shell with additional caps that can be inherited by other processes:
*
* ./ambient_test /bin/bash
*
*
* Verifying that it works:
*
* From the bash spawed by ambient_test run
*
* cat /proc/$$/status
*
* and have a look at the capabilities.
*/
#include <stdlib.h>
#include <stdio.h>
#include <errno.h>
#include <cap-ng.h>
#include <sys/prctl.h>
#include <linux/capability.h>
/*
* Definitions from the kernel header files. These are going to be removed
* when the /usr/include files have these defined.
*/
#define PR_CAP_AMBIENT 47
#define PR_CAP_AMBIENT_IS_SET 1
#define PR_CAP_AMBIENT_RAISE 2
#define PR_CAP_AMBIENT_LOWER 3
#define PR_CAP_AMBIENT_CLEAR_ALL 4
static void set_ambient_cap(int cap)
{
int rc;
capng_get_caps_process();
rc = capng_update(CAPNG_ADD, CAPNG_INHERITABLE, cap);
if (rc) {
printf("Cannot add inheritable cap\n");
exit(2);
}
capng_apply(CAPNG_SELECT_CAPS);
/* Note the two 0s at the end. Kernel checks for these */
if (prctl(PR_CAP_AMBIENT, PR_CAP_AMBIENT_RAISE, cap, 0, 0)) {
perror("Cannot set cap");
exit(1);
}
}
int main(int argc, char **argv)
{
int rc;
set_ambient_cap(CAP_NET_RAW);
set_ambient_cap(CAP_NET_ADMIN);
set_ambient_cap(CAP_SYS_NICE);
printf("Ambient_test forking shell\n");
if (execv(argv[1], argv + 1))
perror("Cannot exec");
return 0;
}
Signed-off-by: Christoph Lameter <[email protected]> # Original author
Signed-off-by: Andy Lutomirski <[email protected]>
Acked-by: Serge E. Hallyn <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Jonathan Corbet <[email protected]>
Cc: Aaron Jones <[email protected]>
Cc: Ted Ts'o <[email protected]>
Cc: Andrew G. Morgan <[email protected]>
Cc: Mimi Zohar <[email protected]>
Cc: Austin S Hemmelgarn <[email protected]>
Cc: Markku Savela <[email protected]>
Cc: Jarkko Sakkinen <[email protected]>
Cc: Michael Kerrisk <[email protected]>
Cc: James Morris <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
- Make it clear that the `node' arg refers to memory allocations only:
kthread_create_on_node() does not pin the new thread to that node's
CPUs.
- Encourage the use of NUMA_NO_NODE.
[[email protected]: use NUMA_NO_NODE in kthread_create() also]
Cc: Nathan Zimmer <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Eric Dumazet <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Tony Luck found on his setup, if memory block size 512M will cause crash
during booting.
BUG: unable to handle kernel paging request at ffffea0074000020
IP: get_nid_for_pfn+0x17/0x40
PGD 128ffcb067 PUD 128ffc9067 PMD 0
Oops: 0000 [#1] SMP
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.2.0-rc8 #1
...
Call Trace:
? register_mem_sect_under_node+0x66/0xe0
register_one_node+0x17b/0x240
? pci_iommu_alloc+0x6e/0x6e
topology_init+0x3c/0x95
do_one_initcall+0xcd/0x1f0
The system has non continuous RAM address:
BIOS-e820: [mem 0x0000001300000000-0x0000001cffffffff] usable
BIOS-e820: [mem 0x0000001d70000000-0x0000001ec7ffefff] usable
BIOS-e820: [mem 0x0000001f00000000-0x0000002bffffffff] usable
BIOS-e820: [mem 0x0000002c18000000-0x0000002d6fffefff] usable
BIOS-e820: [mem 0x0000002e00000000-0x00000039ffffffff] usable
So there are start sections in memory block not present. For example:
memory block : [0x2c18000000, 0x2c20000000) 512M
first three sections are not present.
The current register_mem_sect_under_node() assume first section is
present, but memory block section number range [start_section_nr,
end_section_nr] would include not present section.
For arch that support vmemmap, we don't setup memmap for struct page
area within not present sections area.
So skip the pfn range that belong to absent section.
[[email protected]: simplification]
[[email protected]: more simplification]
Fixes: bdee237c0343 ("x86: mm: Use 2GB memory block size on large memory x86-64 systems")
Fixes: 982792c782ef ("x86, mm: probe memory block size for generic x86 64bit")
Signed-off-by: Yinghai Lu <[email protected]>
Signed-off-by: David Rientjes <[email protected]>
Reported-by: Tony Luck <[email protected]>
Tested-by: Tony Luck <[email protected]>
Cc: Greg KH <[email protected]>
Cc: Ingo Molnar <[email protected]>
Tested-by: David Rientjes <[email protected]>
Cc: <[email protected]> [3.15+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
ocfs2_file_write_iter() is usng the wrong return value ('written'). This
will cause ocfs2_rw_unlock() be called both in write_iter & end_io,
triggering a BUG_ON.
This issue was introduced by commit 7da839c47589 ("ocfs2: use
__generic_file_write_iter()").
Orabug: 21612107
Fixes: 7da839c47589 ("ocfs2: use __generic_file_write_iter()")
Signed-off-by: Ryan Ding <[email protected]>
Reviewed-by: Junxiao Bi <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Mark Fasheh <[email protected]>
Cc: Joel Becker <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
node_data for a node.
Commit f9126ab9241f ("memory-hotplug: fix wrong edge when hot add a new
node") hot-added memory range to memblock, after creating pgdat for new
node.
But there is a problem:
add_memory()
|--> hotadd_new_pgdat()
|--> free_area_init_node()
|--> get_pfn_range_for_nid()
|--> find start_pfn and end_pfn in memblock
|--> ......
|--> memblock_add_node(start, size, nid) -------- Here, just too late.
get_pfn_range_for_nid() will find that start_pfn and end_pfn are both 0.
As a result, when adding memory, dmesg will give the following wrong
message.
Initmem setup node 5 [mem 0x0000000000000000-0xffffffffffffffff]
On node 5 totalpages: 0
Built 5 zonelists in Node order, mobility grouping on. Total pages: 32588823
Policy zone: Normal
init_memory_mapping: [mem 0x60000000000-0x607ffffffff]
The solution is simple, just add the memory range to memblock a little
earlier, before hotadd_new_pgdat().
[[email protected]: coding-style fixes]
Signed-off-by: Tang Chen <[email protected]>
Cc: Xishi Qiu <[email protected]>
Cc: Yasuaki Ishimatsu <[email protected]>
Cc: Kamezawa Hiroyuki <[email protected]>
Cc: Taku Izumi <[email protected]>
Cc: Gu Zheng <[email protected]>
Cc: Naoya Horiguchi <[email protected]>
Cc: Vlastimil Babka <[email protected]>
Cc: Mel Gorman <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: <[email protected]> [4.2.x]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull drm updates from Dave Airlie:
"This is the main pull request for the drm for 4.3. Nouveau is
probably the biggest amount of changes in here, since it missed 4.2.
Highlights below, along with the usual bunch of fixes.
All stuff outside drm should have applicable acks.
Highlights:
- new drivers:
freescale dcu kms driver
- core:
more atomic fixes
disable some dri1 interfaces on kms drivers
drop fb panic handling, this was just getting more broken, as more locking was required.
new core fbdev Kconfig support - instead of each driver enable/disabling it
struct_mutex cleanups
- panel:
more new panels
cleanup Kconfig
- i915:
Skylake support enabled by default
legacy modesetting using atomic infrastructure
Skylake fixes
GEN9 workarounds
- amdgpu:
Fiji support
CGS support for amdgpu
Initial GPU scheduler - off by default
Lots of bug fixes and optimisations.
- radeon:
DP fixes
misc fixes
- amdkfd:
Add Carrizo support for amdkfd using amdgpu.
- nouveau:
long pending cleanup to complete driver,
fully bisectable which makes it larger,
perfmon work
more reclocking improvements
maxwell displayport fixes
- vmwgfx:
new DX device support, supports OpenGL 3.3
screen targets support
- mgag200:
G200eW support
G200e new revision support
- msm:
dragonboard 410c support, msm8x94 support, msm8x74v1 support
yuv format support
dma plane support
mdp5 rotation
initial hdcp
- sti:
atomic support
- exynos:
lots of cleanups
atomic modesetting/pageflipping support
render node support
- tegra:
tegra210 support (dc, dsi, dp/hdmi)
dpms with atomic modesetting support
- atmel:
support for 3 more atmel SoCs
new input formats, PRIME support.
- dwhdmi:
preparing to add audio support
- rockchip:
yuv plane support"
* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1369 commits)
drm/amdgpu: rename gmc_v8_0_init_compute_vmid
drm/amdgpu: fix vce3 instance handling
drm/amdgpu: remove ib test for the second VCE Ring
drm/amdgpu: properly enable VM fault interrupts
drm/amdgpu: fix warning in scheduler
drm/amdgpu: fix buffer placement under memory pressure
drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
drm/amdgpu: fix typo in dce11 watermark setup
drm/amdgpu: fix typo in dce10 watermark setup
drm/amdgpu: use top down allocation for non-CPU accessible vram
drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
drm/amdgpu: set MEC doorbell range for Fiji
drm/amdgpu: implement burst NOP for SDMA
drm/amdgpu: add insert_nop ring func and default implementation
drm/amdgpu: add amdgpu_get_sdma_instance helper function
drm/amdgpu: add AMDGPU_MAX_SDMA_INSTANCES
drm/amdgpu: add burst_nop flag for sdma
drm/amdgpu: add count field for the SDMA NOP packet v2
drm/amdgpu: use PT for VM sync on unmap
drm/amdgpu: make wait_event uninterruptible in push_job
...
|
|
into drm-next
A few more fixes for amdgpu from the last few days:
- Fix several copy paste typos
- Resume from suspend fixes for VCE
- Fix the GPU scheduler warning in kfifo_out
- Re-enable GPUVM fault interrupts which were inadvertently disabled
- GPUVM page table hang fix when paging
* 'drm-next-4.3' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: rename gmc_v8_0_init_compute_vmid
drm/amdgpu: fix vce3 instance handling
drm/amdgpu: remove ib test for the second VCE Ring
drm/amdgpu: properly enable VM fault interrupts
drm/amdgpu: fix warning in scheduler
drm/amdgpu: fix buffer placement under memory pressure
drm/amdgpu/cz: fix cz_dpm_update_low_memory_pstate logic
drm/amdgpu: fix typo in dce11 watermark setup
drm/amdgpu: fix typo in dce10 watermark setup
drm/amdgpu: use top down allocation for non-CPU accessible vram
drm/amdgpu: be explicit about cpu vram access for driver BOs (v2)
|
|
This reverts commit f895c53f8ace3c3e49ebf9def90e63fc6d46d2bf.
This commit causes a NFSv4 regression in that close()+unlink() can end
up failing. The reason is that we no longer have a guarantee that the
CLOSE has completed on the server, meaning that the subsequent call to
REMOVE may fail with NFS4ERR_FILE_OPEN if the server implements Windows
unlink() semantics.
Reported-by: <Olga Kornievskaia <[email protected]>
Cc: Chuck Lever <[email protected]>
Signed-off-by: Trond Myklebust <[email protected]>
|
|
If there is no cached data, then there is no need to track the file
change attribute on close.
Signed-off-by: Trond Myklebust <[email protected]>
|
|
It should be gfx_v8_0_init_compute_vmid since it's
part of the gfx block.
Acked-by: Leo Liu <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Need to properly handle the instances for the idle
checks and soft reset.
Acked-by: Leo Liu <[email protected]>
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
it seems the VCE ring 1 ib test not reliable, remove it for now.
Signed-off-by: Leo Liu <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Reviewed-by: Christian König <[email protected]>
Tested-and-Reviewed-by: Sonny Jiang <[email protected]>
|
|
This fixes not printing VM faults.
Signed-off-by: Christian König <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov:
"Drivers, drivers, drivers... No interesting input core changes this
time"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (74 commits)
Input: elan_i2c - use iap_version to get firmware information
Input: max8997_haptic - fix module alias
Input: elan_i2c - fix typos for validpage_count
Input: psmouse - add small delay for IBM trackpoint pass-through mode
Input: synaptics - fix handling of disabling gesture mode
Input: elan_i2c - enable ELAN0100 acpi panels
Input: gpio-keys - report error when disabling unsupported key
Input: sur40 - fix error return code
Input: sentelic - silence some underflow warnings
Input: zhenhua - switch to using bitrev8()
Input: cros_ec_keyb - replace KEYBOARD_CROS_EC dependency
Input: cap11xx - add LED support
Input: elants_i2c - fix for devm_gpiod_get API change
Input: elan_i2c - enable asynchronous probing
Input: elants_i2c - enable asynchronous probing
Input: elants_i2c - wire up regulator support
Input: do not emit unneeded EV_SYN when suspending
Input: elants_i2c - disable idle mode before updating firmware
MAINTAINERS: Add maintainer for atmel_mxt_ts
Input: atmel_mxt_ts - remove warning on zero T44 count
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"There are little changes in core part, but lots of development are
found in drivers, especially ASoC. The diffstat shows regmap-related
changes for a slight API additions / changes, and that's all.
Looking at the code size statistics, the most significant addition is
for Intel Skylake. (Note that SKL support is still underway, the
codec driver is missing.) Also STI controller driver is a major
addition as well as a few new codec drivers.
In HD-audio side, there are fewer changes than the past. The
noticeable change is the support of ELD notification from i915
graphics driver. Thus this pull request carries a few changes in
drm/i915.
Other than that, USB-audio got a rewrite of runtime PM code. It was
initiated by lockdep warning, but resulted in a good cleanup in the
end.
Below are the highlights:
Common:
- Factoring out of AC'97 reset code from ASoC into the core helper
- A few regmap API extensions (in case it's not pulled yet)
ASoC:
- New drivers for Cirrus CS4349, GTM601, InvenSense ICS43432, Realtek
RT298 and ST STI controllers
- Machine drivers for Rockchip systems with MAX98090 and RT5645 and
RT5650
- Initial driver support for Intel Skylake devices
- Lots of rsnd cleanup and enhancements
- A few DAPM fixes and cleanups
- A large number of cleanups in various drivers (conversion and
standardized to regmap, component) mostly by Lars-Peter and Axel
HD-audio:
- Extended HD-audio core for Intel Skylake controller support
- Quirks for Dell headsets, Alienware 15
- Clean up of pin-based quirk tables for Realtek codecs
- ELD notifier implenetation for Intel HDMI/DP
USB-audio:
- Refactor runtime PM code to make lockdep happier"
* tag 'sound-4.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (411 commits)
drm/i915: Add locks around audio component bind/unbind
drm/i915: Drop port_mst_index parameter from pin/eld callback
ALSA: hda - Fix missing inline for dummy snd_hdac_set_codec_wakeup()
ALSA: hda - Wake the codec up on pin/ELD notify events
ALSA: hda - allow codecs to access the i915 pin/ELD callback
drm/i915: Call audio pin/ELD notify function
drm/i915: Add audio pin sense / ELD callback
ASoC: zx296702-i2s: Fix resource leak when unload module
ASoC: sti_uniperif: Ensure component is unregistered when unload module
ASoC: au1x: psc-i2s: Convert to use devm_ioremap_resource
ASoC: sh: dma-sh7760: Convert to devm_snd_soc_register_platform
ASoC: spear_pcm: Use devm_snd_dmaengine_pcm_register to fix resource leak
ALSA: fireworks/bebob/dice/oxfw: fix substreams counting at vmalloc failure
ASoC: Clean up docbook warnings
ASoC: txx9: Convert to devm_snd_soc_register_platform
ASoC: pxa: Convert to devm_snd_soc_register_platform
ASoC: nuc900: Convert to devm_snd_soc_register_platform
ASoC: blackfin: Convert to devm_snd_soc_register_platform
ASoC: au1x: Convert to devm_snd_soc_register_platform
ASoC: qcom: Constify asoc_qcom_lpass_cpu_dai_ops
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
- Stop using LP855X Platform Data to control regulators
- Move PWM8941 WLED driver into Backlight
- Remove invalid use of IS_ERR_VALUE() macro
- Remove duplicate check for NULL data before unregistering
- Export I2C Device ID structure
* tag 'backlight-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: tosa: Export I2C module alias information
backlight: lp8788_bl: Delete a check before backlight_device_unregister()
backlight: sky81452: Remove unneeded use of IS_ERR_VALUE() macro
backlight: pm8941-wled: Move PM8941 WLED driver to backlight
backlight: lp855x: Use private data for regulator control
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull MFD updates from Lee Jones:
"New Device Support:
- New Clocksource driver from ST
- New MFD/ACPI/DMA drivers for Intel's Sunrisepoint PCH based platforms
- Add support for Arizona WM8998 and WM1814
- Add support for Dialog Semi DA9062 and DA9063
- Add support for Kontron COMe-bBL6 and COMe-cBW6
- Add support for X-Powers AXP152
- Add support for Atmel, many
- Add support for STMPE, many
- Add support for USB in X-Powers AXP22X
Core Frameworks:
- New Base API to traverse devices and their children in reverse order
Bug Fixes:
- Fix race between runtime-suspend and IRQs
- Obtain platform data form more reliable source
Fix-ups:
- Constifying things
- Variable signage changes
- Kconfig depends|selects changes
- Make use of BIT() macro
- Do not supply .owner attribute in *_driver structures
- MAINTAINERS entries
- Stop using set_irq_flags()
- Start using irq_set_chained_handler_and_data()
- Export DT device ID structures"
* tag 'mfd-for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (69 commits)
mfd: jz4740-adc: Init mask cache in generic IRQ chip
mfd: cros_ec: spi: Add OF match table
mfd: stmpe: Add OF match table
mfd: max77686: Split out regulator part from the DT binding
mfd: Add DT binding for Maxim MAX77802 IC
mfd: max77686: Use a generic name for the PMIC node in the example
mfd: max77686: Don't suggest in binding to use a deprecated property
mfd: Add MFD_CROS_EC dependencies
mfd: cros_ec: Remove CROS_EC_PROTO dependency for SPI and I2C drivers
mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs
mfd: axp20x: Add missing registers, and mark more registers volatile
mfd: arizona: Fixup some formatting/white space errors
mfd: wm8994: Fix NULL pointer exception on missing pdata
of: Add vendor prefix for Nuvoton
mfd: mt6397: Implement wake handler and suspend/resume to handle wake up event
mfd: atmel-hlcdc: Add support for new SoCs
mfd: Export OF module alias information in missing drivers
mfd: stw481x: Export I2C module alias information
mfd: da9062: Support for the DA9063 OnKey in the DA9062 core
mfd: max899x: Avoid redundant irq_data lookup
...
|
|
Pull dmaengine updates from Vinod Koul:
"This time we have aded a new capability for scatter-gathered memset
using dmaengine APIs. This is supported in xdmac & hdmac drivers
We have added support for reusing descriptors for examples like video
buffers etc. Driver will follow
The behaviour of descriptor ack has been clarified and documented
New devices added are:
- dma controller in sun[457]i SoCs
- lpc18xx dmamux
- ZTE ZX296702 dma controller
- Analog Devices AXI-DMAC DMA controller
- eDMA support for dma-crossbar
- imx6sx support in imx-sdma driver
- imx-sdma device to device support
Other:
- jz4780 fixes
- ioatdma large refactor and cleanup for removal of ioat v1 and v2
which is deprecated and fixes
- ACPI support in X-Gene DMA engine driver
- ipu irq fixes
- mvxor fixes
- minor fixes spread thru drivers"
[ The Kconfig and Makefile entries got re-sorted alphabetically, and I
handled the conflict with the new Intel integrated IDMA driver by
slightly mis-sorting it on purpose: "IDMA64" got sorted after "IMX" in
order to keep the Intel entries together. I think it might be a good
idea to just rename the IDMA64 config entry to INTEL_IDMA64 to make
the sorting be a true sort, not this mismash.
Also, this merge disables the COMPILE_TEST for the sun4i DMA
controller, because it does not compile cleanly at all. - Linus ]
* tag 'dmaengine-4.3-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (89 commits)
dmaengine: ioatdma: add Broadwell EP ioatdma PCI dev IDs
dmaengine :ipu: change ipu_irq_handler() to remove compile warning
dmaengine: ioatdma: Fix variable array length
dmaengine: ioatdma: fix sparse "error" with prep lock
dmaengine: hdmac: Add memset capabilities
dmaengine: sort the sh Makefile
dmaengine: sort the sh Kconfig
dmaengine: sort the dw Kconfig
dmaengine: sort the Kconfig
dmaengine: sort the makefile
drivers/dma: make mv_xor.c driver explicitly non-modular
dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller
devicetree: Add bindings documentation for Analog Devices AXI-DMAC
dmaengine: xgene-dma: Fix the lock to allow client for further submission of requests
dmaengine: ioatdma: fix coccinelle warning
dmaengine: ioatdma: fix zero day warning on incompatible pointer type
dmaengine: tegra-apb: Simplify locking for device using global pause
dmaengine: tegra-apb: Remove unnecessary return statements and variables
dmaengine: tegra-apb: Avoid unnecessary channel base address calculation
dmaengine: tegra-apb: Remove unused variables
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control updates from Linus Walleij:
"This is the bulk of pin control changes for the v4.3 development
cycle.
Like with GPIO it's a lot of stuff. If my subsystems are any sign of
the overall tempo of the kernel v4.3 will be a gigantic diff.
[ It looks like 4.3 is calmer than 4.2 in most other subsystems, but
we'll see - Linus ]
Core changes:
- It is possible configure groups in debugfs.
- Consolidation of chained IRQ handler install/remove replacing all
call sites where irq_set_handler_data() and
irq_set_chained_handler() were done in succession with a combined
call to irq_set_chained_handler_and_data(). This series was
created by Thomas Gleixner after the problem was observed by
Russell King.
- Tglx also made another series of patches switching
__irq_set_handler_locked() for irq_set_handler_locked() which is
way cleaner.
- Tglx also wrote a good bunch of patches to make use of
irq_desc_get_xxx() accessors and avoid looking up irq_descs from
IRQ numbers. The goal is to get rid of the irq number from the
handlers in the IRQ flow which is nice.
Driver feature enhancements:
- Power management support for the SiRF SoC Atlas 7.
- Power down support for the Qualcomm driver.
- Intel Cherryview and Baytrail: switch drivers to use raw spinlocks
in IRQ handlers to play nice with the realtime patch set.
- Rework and new modes handling for Qualcomm SPMI-MPP.
- Pinconf power source config for SH PFC.
New drivers and subdrivers:
- A new driver for Conexant Digicolor CX92755.
- A new driver for UniPhier PH1-LD4, PH1-Pro4, PH1-sLD8, PH1-Pro5,
ProXtream2 and PH1-LD6b SoC pin control support.
- Reverse-egineered the S/PDIF settings for the Allwinner sun4i
driver.
- Support for Qualcomm Technologies QDF2xxx ARM64 SoCs
- A new Freescale i.mx6ul subdriver.
Cleanup:
- Remove platform data support in a number of SH PFC subdrivers"
* tag 'pinctrl-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (95 commits)
pinctrl: at91: fix null pointer dereference
pinctrl: mediatek: Implement wake handler and suspend resume
pinctrl: mediatek: Fix multiple registration issue.
pinctrl: sh-pfc: r8a7794: add USB pin groups
pinctrl: at91: Use generic irq_{request,release}_resources()
pinctrl: cherryview: Use raw_spinlock for locking
pinctrl: baytrail: Use raw_spinlock for locking
pinctrl: imx6ul: Remove .owner field
pinctrl: zynq: Fix typos in smc0_nand_grp and smc0_nor_grp
pinctrl: sh-pfc: Implement pinconf power-source param for voltage switching
clk: rockchip: add pclk_pd_pmu to the list of rk3288 critical clocks
pinctrl: sun4i: add spdif to pin description.
pinctrl: atlas7: clear ugly branch statements for pull and drivestrength
pinctrl: baytrail: Serialize all register access
pinctrl: baytrail: Drop FSF mailing address
pinctrl: rockchip: only enable gpio clock when it setting
pinctrl/mediatek: fix spelling mistake in dev_err error message
pinctrl: cherryview: Serialize all register access
pinctrl: UniPhier: PH1-Pro5: add I2C ch6 pin-mux setting
pinctrl: nomadik: reflect current input value
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.3 kernel cycle.
There is quite a lot going on in the GPIO subsystem this merge window,
so the main matter is decribed below.
The hits in other subsystems when making the GPIO flags optional are
all ACKed by their respective subsystem maintainers.
Core changes:
- Root out the wrapper devm_gpiod_get() and gpiod_get() etc versions
of the descriptor calls that did not use the flags argument on the
end. This was around for too long and eventually Uwe Kleine-König
took the time to clean it out and the last users are removed along
with the macros in this tag. In several cases the use of flags
simplifies the code. For this reason we have (ACKed) patches
hitting in DRM, IIO, media, NFC, USB+PHY up until we hammer in the
nail with removing the macros.
- Add a fat document describing how much ready-made GPIO stuff we
have i the kernel to discourage people from reinventing a square
wheel in userspace, as so often happens.
- Create a separate lockdep class for each instance of a GPIO IRQ
chip instead of using one class for all chips, as the current code
will not work with systems with several GPIO chips doing lockdep
debugging.
- Protect against driver unloading also when a GPIO line is only used
as IRQ for the GPIOLIB_IRQCHIP helpers.
- If the GPIO chip has no designated owner, assign the parent device
driver owner as owner.
- Consolidation of chained IRQ handler install/remove replacing all
call sites where irq_set_handler_data() and
irq_set_chained_handler() were done in succession with a combined
call to irq_set_chained_handler_and_data().
This series was created by Thomas Gleixner after the problem was
observed by Russell King.
- Tglx also made another series of patches switching
__irq_set_handler_locked() for irq_set_handler_locked() which is
way cleaner.
- Tglx and Jiang Liu wrote a good bunch of patches to make use of
irq_desc_get_xxx() accessors and avoid looking up irq_descs from
IRQ numbers. The goal is to get rid of the irq number from the
handlers in the IRQ flow which is nice.
- Rob Herring killed off the set_irq_flags() for all GPIO drivers.
This was an ARM specific function that is replaced with the generic
irq_modify_status() where special flags are actually needed.
- When an OF node has a pin range for its GPIOs, return -EPROBE_DEFER
if the pin controller isn't available. Pretty logical, yet needed
to be fixed.
- If a driver using GPIOLIB_IRQCHIP has its own irq_*_resources call
back, then call these instead of the defaults provided by the
GPIOLIB.
- Fix an undocumented ABI hole: named GPIOs were not properly
documented.
Driver improvements:
- Add get_direction() support to the generic GPIO driver, it's
strange that we didn't have that before.
- Make it possible to have input-only GPIO chips using the generic
GPIO driver.
- Clean out platform data support from the Emma Mobile (EM) driver
- Finegrained runtime PM support for the RCAR driver.
- Support r8a7795 (R-car H3) in the RCAR driver.
- Support interrupts on GPIOs 16 thru 31 in the DaVinci driver.
- Some consolidation and new support in the MPC8xxx driver, we now
support MPC5125.
- Preempt-RT-friendly patches: the OMAP, MPC8xxx, drivers uses raw
spinlocks making it work better with the realime patches.
- Interrupt support for the EXTRAXFS GPIO driver.
- Make the ETRAXFS GPIO driver support also ARTPEC-3.
- Interrupt and wakeup support for the BRCMSTB driver, also for
wakeup from S5 cold boot.
- Mask MXC IRQs during suspend.
- Improve OMAP2 GPIO set_debounce() to work according to spec.
- The VF610 driver handles IRQs properly.
New drivers:
- ZTE ZX GPIO driver"
* tag 'gpio-v4.3-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (87 commits)
Revert "gpio: extraxfs: fix returnvar.cocci warnings"
gpio: tc3589x: use static container helper
gpio: xlp: fix error return code
gpio: vf610: handle level IRQ's properly
gpio: max732x: Fix error handling in probe()
gpio: omap: fix clk_prepare/unprepare usage
gpio: omap: protect regs access in omap_gpio_irq_handler
gpio: omap: fix omap2_set_gpio_debounce
gpio: omap: switch to use platform_get_irq
gpio: omap: remove wrong irq_domain_remove usage in probe
gpiolib: add description for gpio irqchip fields in struct gpio_chip
gpio: extraxfs: fix returnvar.cocci warnings
gpiolib: irqchip: use different lockdep class for each gpio irqchip
gpio/grgpio: fix deadlock in grgpio_irq_unmap()
Documentation: gpio: consumer: describe active low property
gpio: mxc: fix section mismatch warning
gpio/mxc: mask gpio interrupts in suspend
gpio: omap: Fix missing raw locks conversion
gpio: brcmstb: support wakeup from S5 cold boot
gpio: brcmstb: Add interrupt and wakeup source support
...
|
|
Pull tile updates from Chris Metcalf:
"This includes secure computing support as well as miscellaneous minor
improvements"
* git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile: correct some typos in opcode type names
tile/vdso: emit a GNU hash as well
tile: Remove finish_arch_switch
tile: enable full SECCOMP support
tile/time: Migrate to new 'set-state' interface
|
|
This should never happen so warn when the count does
not equal the expected size.
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|