| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
- Return true/false (not 1/0) from bool functions (Yang Li)
- Add Joyce Ooi as Altera PCIe maintainer (Joyce Ooi)
* pci/misc:
MAINTAINERS: Add Joyce Ooi as Altera PCIe maintainer
x86/pci: Return true/false (not 1/0) from bool functions
|
|
- Ignore pciehp Link Down/Up caused by DPC so device remains bound to
driver (Lukas Wunner)
- Declare global cpci_debug in header file (Krzysztof Wilczyński)
* pci/hotplug:
PCI: cpcihp: Declare cpci_debug in header file
PCI: pciehp: Ignore Link Down/Up caused by DPC
|
|
- Make domain/bus/dev/fn format in AER messages match pci_name() format
(Yicong Yang)
* pci/error:
Documentation: PCI: Fix typo in pci-error-recovery.rst
PCI/AER: Use consistent format when printing PCI device
|
|
- Add a debug message on PCI device release (Niklas Schnelle)
- Dynamically map ECAM regions to reduce vmalloc usage (Russell King)
* pci/enumeration:
PCI: Dynamically map ECAM regions
PCI: Print a debug message on PCI device release
|
|
While looking at pci_alloc_p2pmem() I found RCU protection was not properly
applied there, as pdev->p2pdma was potentially read multiple times.
Fix pci_alloc_p2pmem(), add __rcu qualifier to p2pdma field of struct
pci_dev, and fix all other accesses to this field with proper RCU verbs.
Link: https://lore.kernel.org/r/[email protected]
Fixes: 1570175abd16 ("PCI/P2PDMA: track pgmap references per resource, not globally")
Signed-off-by: Eric Dumazet <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Logan Gunthorpe <[email protected]>
Cc: Dan Williams <[email protected]>
Cc: Ira Weiny <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: "Jérôme Glisse" <[email protected]>
Cc: "Rafael J. Wysocki" <[email protected]>
|
|
"bar_addr" is passed as the argument to writel(), which expects a
"void __iomem *". Annotate "bar_addr" correctly. Resolves an sparse
"incorrect type in argument 2 (different address spaces)" warning.
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
|
|
Fix kernel-doc formatting throughout drivers/pci and related include files.
No change to functionality intended.
Check for warnings:
$ find include drivers/pci -type f -path "*pci*.[ch]" | xargs scripts/kernel-doc -none
[bhelgaas: squashed to one commit]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Krzysztof Wilczyński <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
|
|
BookE does not have mtmsrd, switch to use wrteei to enable MSR[EE].
Fixes: dd152f70bdc1 ("powerpc/64s: system call avoid setting MSR[RI] until we set MSR[EE]")
Reported-by: Christian Zigotzky <[email protected]>
Signed-off-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The semantics of pfn_valid() is to check presence of the memory map for a
PFN and not whether a PFN is in RAM. The memory map may be present for a
hole in the physical memory and if such hole corresponds to an MMIO range,
__arm_ioremap_pfn_caller() will produce a WARN() and fail:
[ 2.863406] WARNING: CPU: 0 PID: 1 at arch/arm/mm/ioremap.c:287 __arm_ioremap_pfn_caller+0xf0/0x1dc
[ 2.864812] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.13.0-09882-ga180bd1d7e16 #1
[ 2.865263] Hardware name: Generic DT based system
[ 2.865711] Backtrace:
[ 2.866063] [<80b07e58>] (dump_backtrace) from [<80b080ac>] (show_stack+0x20/0x24)
[ 2.866633] r7:00000009 r6:0000011f r5:60000153 r4:80ddd1c0
[ 2.866922] [<80b0808c>] (show_stack) from [<80b18df0>] (dump_stack_lvl+0x58/0x74)
[ 2.867117] [<80b18d98>] (dump_stack_lvl) from [<80b18e20>] (dump_stack+0x14/0x1c)
[ 2.867309] r5:80118cac r4:80dc6774
[ 2.867404] [<80b18e0c>] (dump_stack) from [<80122fcc>] (__warn+0xe4/0x150)
[ 2.867583] [<80122ee8>] (__warn) from [<80b08850>] (warn_slowpath_fmt+0x88/0xc0)
[ 2.867774] r7:0000011f r6:80dc6774 r5:00000000 r4:814c4000
[ 2.867917] [<80b087cc>] (warn_slowpath_fmt) from [<80118cac>] (__arm_ioremap_pfn_caller+0xf0/0x1dc)
[ 2.868158] r9:00000001 r8:9ef00000 r7:80e8b0d4 r6:0009ef00 r5:00000000 r4:00100000
[ 2.868346] [<80118bbc>] (__arm_ioremap_pfn_caller) from [<80118df8>] (__arm_ioremap_caller+0x60/0x68)
[ 2.868581] r9:9ef00000 r8:821b6dc0 r7:00100000 r6:00000000 r5:815d1010 r4:80118d98
[ 2.868761] [<80118d98>] (__arm_ioremap_caller) from [<80118fcc>] (ioremap+0x28/0x30)
[ 2.868958] [<80118fa4>] (ioremap) from [<8062871c>] (__devm_ioremap_resource+0x154/0x1c8)
[ 2.869169] r5:815d1010 r4:814c5d2c
[ 2.869263] [<806285c8>] (__devm_ioremap_resource) from [<8062899c>] (devm_ioremap_resource+0x14/0x18)
[ 2.869495] r9:9e9f57a0 r8:814c4000 r7:815d1000 r6:815d1010 r5:8177c078 r4:815cf400
[ 2.869676] [<80628988>] (devm_ioremap_resource) from [<8091c6e4>] (fsi_master_acf_probe+0x1a8/0x5d8)
[ 2.869909] [<8091c53c>] (fsi_master_acf_probe) from [<80723dbc>] (platform_probe+0x68/0xc8)
[ 2.870124] r9:80e9dadc r8:00000000 r7:815d1010 r6:810c1000 r5:815d1010 r4:00000000
[ 2.870306] [<80723d54>] (platform_probe) from [<80721208>] (really_probe+0x1cc/0x470)
[ 2.870512] r7:815d1010 r6:810c1000 r5:00000000 r4:815d1010
[ 2.870651] [<8072103c>] (really_probe) from [<807215cc>] (__driver_probe_device+0x120/0x1fc)
[ 2.870872] r7:815d1010 r6:810c1000 r5:810c1000 r4:815d1010
[ 2.871013] [<807214ac>] (__driver_probe_device) from [<807216e8>] (driver_probe_device+0x40/0xd8)
[ 2.871244] r9:80e9dadc r8:00000000 r7:815d1010 r6:810c1000 r5:812feaa0 r4:812fe994
[ 2.871428] [<807216a8>] (driver_probe_device) from [<80721a58>] (__driver_attach+0xa8/0x1d4)
[ 2.871647] r9:80e9dadc r8:00000000 r7:00000000 r6:810c1000 r5:815d1054 r4:815d1010
[ 2.871830] [<807219b0>] (__driver_attach) from [<8071ee8c>] (bus_for_each_dev+0x88/0xc8)
[ 2.872040] r7:00000000 r6:814c4000 r5:807219b0 r4:810c1000
[ 2.872194] [<8071ee04>] (bus_for_each_dev) from [<80722208>] (driver_attach+0x28/0x30)
[ 2.872418] r7:810a2aa0 r6:00000000 r5:821b6000 r4:810c1000
[ 2.872570] [<807221e0>] (driver_attach) from [<8071f80c>] (bus_add_driver+0x114/0x200)
[ 2.872788] [<8071f6f8>] (bus_add_driver) from [<80722ec4>] (driver_register+0x98/0x128)
[ 2.873011] r7:81011d0c r6:814c4000 r5:00000000 r4:810c1000
[ 2.873167] [<80722e2c>] (driver_register) from [<80725240>] (__platform_driver_register+0x2c/0x34)
[ 2.873408] r5:814dcb80 r4:80f2a764
[ 2.873513] [<80725214>] (__platform_driver_register) from [<80f2a784>] (fsi_master_acf_init+0x20/0x28)
[ 2.873766] [<80f2a764>] (fsi_master_acf_init) from [<80f014a8>] (do_one_initcall+0x108/0x290)
[ 2.874007] [<80f013a0>] (do_one_initcall) from [<80f01840>] (kernel_init_freeable+0x1ac/0x230)
[ 2.874248] r9:80e9dadc r8:80f3987c r7:80f3985c r6:00000007 r5:814dcb80 r4:80f627a4
[ 2.874456] [<80f01694>] (kernel_init_freeable) from [<80b19f44>] (kernel_init+0x20/0x138)
[ 2.874691] r10:00000000 r9:00000000 r8:00000000 r7:00000000 r6:00000000 r5:80b19f24
[ 2.874894] r4:00000000
[ 2.874977] [<80b19f24>] (kernel_init) from [<80100170>] (ret_from_fork+0x14/0x24)
[ 2.875231] Exception stack(0x814c5fb0 to 0x814c5ff8)
[ 2.875535] 5fa0: 00000000 00000000 00000000 00000000
[ 2.875849] 5fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 2.876133] 5fe0: 00000000 00000000 00000000 00000000 00000013 00000000
[ 2.876363] r5:80b19f24 r4:00000000
[ 2.876683] ---[ end trace b2f74b8536829970 ]---
[ 2.876911] fsi-master-acf gpio-fsi: ioremap failed for resource [mem 0x9ef00000-0x9effffff]
[ 2.877492] fsi-master-acf gpio-fsi: Error -12 mapping coldfire memory
[ 2.877689] fsi-master-acf: probe of gpio-fsi failed with error -12
Use memblock_is_map_memory() instead of pfn_valid() to check if a PFN is in
RAM or not.
Reported-by: Guenter Roeck <[email protected]>
Fixes: a4d5613c4dc6 ("arm: extend pfn_valid to take into account freed memory map alignment")
Signed-off-by: Mike Rapoport <[email protected]>
Tested-by: Guenter Roeck <[email protected]>
|
|
This enables ftrace kprobe events to access kernel function
arguments via $argN syntax.
Signed-off-by: Jeff Xie <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
With "riscv: mm: add THP support on 64-bit", mk_pmd() function
introduce build errors,
1.build with CONFIG_ARCH_RV32I=y:
arch/riscv/include/asm/pgtable.h: In function 'mk_pmd':
arch/riscv/include/asm/pgtable.h:513:9: error: implicit declaration of function 'pfn_pmd';
did you mean 'pfn_pgd'? [-Werror=implicit-function-declaration]
2.build with CONFIG_SPARSEMEM=y && CONFIG_SPARSEMEM_VMEMMAP=n
arch/riscv/include/asm/pgtable.h: In function 'mk_pmd':
include/asm-generic/memory_model.h:64:14: error: implicit declaration of function 'page_to_section';
did you mean 'present_section'? [-Werror=implicit-function-declaration]
Move the definition of mk_pmd to pgtable-64.h to fix the first error.
Use macro definition instead of inline function for mk_pmd
to fix the second problem. It is similar to the mk_pte macro.
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Nanyong Sun <[email protected]>
Tested-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
We have a lot of variables that are used to hold kernel mapping addresses,
offsets between physical and virtual mappings and some others used for XIP
kernels: they are all defined at different places in mm/init.c, so group
them into a single structure with, for some of them, more explicit and concise
names.
Signed-off-by: Alexandre Ghiti <[email protected]>
Signed-off-by: Palmer Dabbelt <[email protected]>
|
|
We need to guarantee it's initially zero. Otherwise, it'll hurt entire flag
operations.
Fixes: b763f3bedc2d ("f2fs: restructure f2fs page.private layout")
Reviewed-by: Chao Yu <[email protected]>
Signed-off-by: Jaegeuk Kim <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt patches for 5.14-rc1.
Nothing major here just lots of little changes for new hardware and
features. Highlights are:
- more USB 4 support added to the thunderbolt core
- build warning fixes all over the place
- usb-serial driver updates and new device support
- mtu3 driver updates
- gadget driver updates
- dwc3 driver updates
- dwc2 driver updates
- isp1760 host driver updates
- musb driver updates
- lots of other tiny things.
Full details are in the shortlog.
All of these have been in linux-next for a while now with no reported
issues"
* tag 'usb-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (223 commits)
phy: qcom-qusb2: Add configuration for SM4250 and SM6115
dt-bindings: phy: qcom,qusb2: document sm4250/6115 compatible
dt-bindings: usb: qcom,dwc3: Add bindings for sm6115/4250
USB: cdc-acm: blacklist Heimann USB Appset device
usb: xhci-mtk: allow multiple Start-Split in a microframe
usb: ftdi-elan: remove redundant continue statement in a while-loop
usb: class: cdc-wdm: return the correct errno code
xhci: remove redundant continue statement
usb: dwc3: Fix debugfs creation flow
usb: gadget: hid: fix error return code in hid_bind()
usb: gadget: eem: fix echo command packet response issue
usb: gadget: f_hid: fix endianness issue with descriptors
Revert "USB: misc: Add onboard_usb_hub driver"
Revert "of/platform: Add stubs for of_platform_device_create/destroy()"
Revert "usb: host: xhci-plat: Create platform device for onboard hubs in probe()"
Revert "arm64: dts: qcom: sc7180-trogdor: Add nodes for onboard USB hub"
xhci: solve a double free problem while doing s4
xhci: handle failed buffer copy to URB sg list and fix a W=1 copiler warning
xhci: Add adaptive interrupt rate for isoch TRBs with XHCI_AVOID_BEI quirk
xhci: Remove unused defines for ERST_SIZE and ERST_ENTRIES
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty / serial updates from Greg KH:
"Here is the big set of tty and serial driver patches for 5.14-rc1.
A bit more than normal, but nothing major, lots of cleanups.
Highlights are:
- lots of tty api cleanups and mxser driver cleanups from Jiri
- build warning fixes
- various serial driver updates
- coding style cleanups
- various tty driver minor fixes and updates
- removal of broken and disable r3964 line discipline (finally!)
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (227 commits)
serial: mvebu-uart: remove unused member nb from struct mvebu_uart
arm64: dts: marvell: armada-37xx: Fix reg for standard variant of UART
dt-bindings: mvebu-uart: fix documentation
serial: mvebu-uart: correctly calculate minimal possible baudrate
serial: mvebu-uart: do not allow changing baudrate when uartclk is not available
serial: mvebu-uart: fix calculation of clock divisor
tty: make linux/tty_flip.h self-contained
serial: Prefer unsigned int to bare use of unsigned
serial: 8250: 8250_omap: Fix possible interrupt storm on K3 SoCs
serial: qcom_geni_serial: use DT aliases according to DT bindings
Revert "tty: serial: Add UART driver for Cortina-Access platform"
tty: serial: Add UART driver for Cortina-Access platform
MAINTAINERS: add me back as mxser maintainer
mxser: Documentation, fix typos
mxser: Documentation, make the docs up-to-date
mxser: Documentation, remove traces of callout device
mxser: introduce mxser_16550A_or_MUST helper
mxser: rename flags to old_speed in mxser_set_serial_info
mxser: use port variable in mxser_set_serial_info
mxser: access info->MCR under info->slock
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging / IIO driver updates from Greg KH:
"Here is the big set of IIO and staging driver patches for 5.14-rc1.
Loads of IIO driver updates and additions in here, the shortlog has
the full details.
For the staging side, we moved a few drivers out of staging, and
deleted the kpc2000 drivers as the original developer asked us to
because no one was working on them anymore.
Also in here are loads of coding style cleanups due to different
intern projects focusing on the staging tree to try to get experience
doing kernel development.
All of these have been in the linux-next tree for a while with no
reported problems"
* tag 'staging-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (744 commits)
staging: hi6421-spmi-pmic: cleanup some macros
staging: hi6421-spmi-pmic: change identation of a table
staging: hi6421-spmi-pmic: change a return code
staging: hi6421-spmi-pmic: better name IRQs
staging: hi6421-spmi-pmic: use devm_request_threaded_irq()
staging: hisilicon,hi6421-spmi-pmic.yaml: cleanup descriptions
spmi: hisi-spmi-controller: move driver from staging
phy: phy-hi3670-usb3: move driver from staging into phy
staging: rtl8188eu: remove include/rtw_debug.h header
staging: rtl8188eu: remove GlobalDebugLevel variable
staging: rtl8188eu: remove DRIVER_PREFIX preprocessor definition
staging: rtl8188eu: remove RT_TRACE macro
staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_recv.c
staging: rtl8188eu: remove all RT_TRACE calls from hal/hal_intf.c
staging: rtl8188eu: remove all RT_TRACE calls from hal/rtl8188eu_xmit.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_xmit.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_pwrctrl.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_recv.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ioctl_set.c
staging: rtl8188eu: remove all RT_TRACE calls from core/rtw_ieee80211.c
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core changes from Greg KH:
"Here is the small set of driver core and debugfs updates for 5.14-rc1.
Included in here are:
- debugfs api cleanups (touched some drivers)
- devres updates
- tiny driver core updates and tweaks
Nothing major in here at all, and all have been in linux-next for a
while with no reported issues"
* tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
docs: ABI: testing: sysfs-firmware-memmap: add some memmap types.
devres: Enable trace events
devres: No need to call remove_nodes() when there none present
devres: Use list_for_each_safe_from() in remove_nodes()
devres: Make locking straight forward in release_nodes()
kernfs: move revalidate to be near lookup
drivers/base: Constify static attribute_group structs
firmware_loader: remove unneeded 'comma' macro
devcoredump: remove contact information
driver core: Drop helper devm_platform_ioremap_resource_wc()
component: Rename 'dev' to 'parent'
component: Drop 'dev' argument to component_match_realloc()
device property: Don't check for NULL twice in the loops
driver core: auxiliary bus: Fix typo in the docs
drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO
debugfs: remove return value of debugfs_create_ulong()
debugfs: remove return value of debugfs_create_bool()
scsi: snic: debugfs: remove local storage of debugfs files
b43: don't save dentries for debugfs
b43legacy: don't save dentries for debugfs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc driver updates from Greg KH:
"Here is the big set of char / misc and other driver subsystem updates
for 5.14-rc1. Included in here are:
- habanalabs driver updates
- fsl-mc driver updates
- comedi driver updates
- fpga driver updates
- extcon driver updates
- interconnect driver updates
- mei driver updates
- nvmem driver updates
- phy driver updates
- pnp driver updates
- soundwire driver updates
- lots of other tiny driver updates for char and misc drivers
This is looking more and more like the "various driver subsystems
mushed together" tree...
All of these have been in linux-next for a while with no reported
issues"
* tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
mcb: Use DEFINE_RES_MEM() helper macro and fix the end address
PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable
bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls
bus: mhi: Wait for M2 state during system resume
bus: mhi: core: Fix power down latency
intel_th: Wait until port is in reset before programming it
intel_th: msu: Make contiguous buffers uncached
intel_th: Remove an unused exit point from intel_th_remove()
stm class: Spelling fix
nitro_enclaves: Set Bus Master for the NE PCI device
misc: ibmasm: Modify matricies to matrices
misc: vmw_vmci: return the correct errno code
siox: Simplify error handling via dev_err_probe()
fpga: machxo2-spi: Address warning about unused variable
lkdtm/heap: Add init_on_alloc tests
selftests/lkdtm: Enable various testable CONFIGs
lkdtm: Add CONFIG hints in errors where possible
lkdtm: Enable DOUBLE_FAULT on all architectures
lkdtm/heap: Add vmalloc linear overflow test
lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones:
"New Drivers:
- Add support for Richtek RT4831 Backlight
New Device Support:
- Add support for Qualcomm PMI8994 WLED Backlight
Fix-ups:
- Device Tree adaptions to richtek,rt4831-backlight
- Trivial spelling, whitespace, etc in Kconfig
- Use Atomic PWM API in lm3630a_bl
Bug Fixes:
- Fix Firmware Node Leak in error path in lm3630a_bl
- Fix erroneous return codes in lm3630a_bl"
* tag 'backlight-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight:
backlight: lm3630a: Convert to atomic PWM API and check for errors
backlight: lm3630a: Fix return code of .update_status() callback
backlight: Kconfig whitespace and indentation cleanups
video: backlight: qcom-wled: Add PMI8994 compatible
backlight: rt4831: Adds support for Richtek RT4831 backlight
backlight: rt4831: Adds DT binding document for Richtek RT4831 backlight
backlight: lm3630a_bl: Put fwnode in error case during ->probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mfd updates from Lee Jones:
"Core Frameworks:
- Fix Software Node clean-up code
New Drivers:
- Add support for MediaTek MT6359 PMIC
- Add support for Qualcomm PM8008 PMIC
- Add support for Richtek RT4831
New Device Support:
- Add support for Audio CODECs to Rockchip RK817
- Add support for Alder Lake-M to Intel LPSS PCI
- Add support for Periph Device Charge to ChromeOS EC
New Functionality:
- Provide additional IRQs for wcd934x
- Add optional Reset functionality to lp87565
Fix-ups:
- Namespacing & visibility fixes to lp87565
- Differentiate between Power and Home key IRQs in mt6358
- Export I2C device tables in da9052-i2c, stmpe-i2c
- Adapt IRQ flags in max8907, rn5t61, max8907
- Make some functions/devices optional in axp20x, cros_ec_dev
- Explicitly include used header files in ioc3
- Remove superfluous lines in MAINTAINERS, sec-core, st,stm32-timers
- Resolve Kerneldoc issues in omap-usb-host, omap-usb-tll, si476x-cmd, si476x-i2c
- Convert arizona-core to a module
- Copyright changes in hi655x-pmic
- Drop support for board file initialisation in sec-core
- Trivial spelling, whitespace etc updates in lp87565, si476x-cmd,
mt6360-core, wm831x-core, twl-core, db8500-prcmu
- Simplify various implementations of wcd934x, mt6360-core, max8997,
max8998, da9052-i2c, da9062-core, sec-core,
- Device Tree binding changes in google,cros-ec,
richtek,rt4831-backlight, db8500-prcmu, qcom,pm8008, qcom,spmi-pmic
- Use provided APIs to simplify t7l66xb, as3722, da9055-core,
tps80031, 88pm800, 88pm805, asic3, sun6i-prcm, wm831x-core,
wm831x-otp, ucb1x00-assabet, timberdale, sm501, pcf50633-core,
kempld-core, janz-cmodio, intel_soc_pmic_bxtwc, ab8500-core
Bug Fixes:
- Fix unused variable warning in rk817_codec
- Fix regulator voltage configuration in rohm-bd71828
- Fix ongoing freeing of regmap_config 'name' issue in syscon
- Fix error handling path in da9063-i2c
- Fix Kconfig issues in MFD_MP2629
- Fix DMA mask warnings in motorola-cpcap"
* tag 'mfd-next-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (83 commits)
mfd: cros_ec: Add peripheral device charger
mfd: max8907: Remove IRQF_NO_AUTOEN flag
mfd: ab8500-core: Use DEVICE_ATTR_RO/RW macro
mfd: intel_soc_pmic_bxtwc: Use DEVICE_ATTR_ADMIN_RW macro
mfd: janz-cmodio: Use DEVICE_ATTR_RO macro
mfd: kempld-core: Use DEVICE_ATTR_RO macro
mfd: pcf50633: Use DEVICE_ATTR_ADMIN_RO macro
mfd: sm501: Use DEVICE_ATTR_RO macro
mfd: timberdale: Use DEVICE_ATTR_RO macro
mfd: ucb1x00-assabet: Use DEVICE_ATTR_RO macro
mfd: wm831x: Use DEVICE_ATTR_RO macro
mfd: wm831x: Use DEFINE_RES_IRQ_NAMED() and DEFINE_RES_IRQ() to simplify code
dt-bindings: mfd: stm32-timers: Remove #address/size cells from required properties
mfd: sun6i-prcm: Use DEFINE_RES_MEM() to simplify code
mfd: asic3: Use DEFINE_RES_MEM() and DEFINE_RES_IRQ() to simplify code
mfd: 88pm805: Use DEFINE_RES_IRQ_NAMED() to simplify code
mfd: 88pm800: Use DEFINE_RES_IRQ_NAMED() to simplify code
mfd: tps80031: Use DEFINE_RES_IRQ() to simplify code
mfd: da9055: Use DEFINE_RES_IRQ_NAMED() to simplify code
mfd: as3722: Use DEFINE_RES_IRQ_NAMED() to simplify code
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"This time around we have a smaller pull request than usual and this
includes code removal, so should be good!
New drivers/devices
- Support for QCOM SM8250 GPI DMA
- removal of shdma-of driver and binding
Updates:
- arm-pl08x yaml binding move
- altera-msgdma gained DT support
- removal of imx-sdma platform data support
- idxd and xilinx driver updates"
* tag 'dmaengine-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (22 commits)
dmaengine: imx-sdma: Remove platform data header
dmaengine: xilinx: dpdma: Fix spacing around addr[i-1]
dmaengine: xilinx: dpdma: Use kernel type u32 over uint32_t
dmaengine: altera-msgdma: add OF support
MAINTAINERS: add entry for Altera mSGDMA
dt-bindings: dma: add schema for altera-msgdma
dmaengine: xilinx: dpdma: fix kernel-doc
dmaengine: sf-pdma: apply proper spinlock flags in sf_pdma_prep_dma_memcpy()
dmaengine: sh: Remove unused shdma-of driver
dt-bindings: dmaengine: Remove SHDMA Device Tree bindings
dmaengine: qcom: gpi: Add SM8250 compatible
dt-bindings: dmaengine: qcom: gpi: add compatible for sm8250
dmaengine: sun4i: Use list_move_tail instead of list_del/list_add_tail
dmaengine: ti: omap-dma: Skip pointless cpu_pm context restore on errors
dmaengine: hsu: Account transferred bytes
dmaengine: Move kdoc description of struct dma_chan_percpu closer to it
dmaengine: xilinx: dpdma: Print debug message when losing vsync race
dmaengine: xilinx: dpdma: Print channel number in kernel log messages
dt-bindings: dma: convert arm-pl08x to yaml
dmaengine: idxd: remove devm allocation for idxd->int_handles
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fixes from Ulf Hansson
"MMC core:
- Clear flags before allowing to retune
MMC host:
- sdhci: Clear unused bounce buffer at DMA mmap error path
- sdhci: Fix warning message when accessing RPMB in HS400 mode
- sdhci-of-arasan: Use clock-frequency property to update clk_xin
- mtk-sd: Fixup compatible string for MT8195"
* tag 'mmc-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci: Fix warning message when accessing RPMB in HS400 mode
dt-bindings: mmc: change compatiable string for MT8195 mmc host IP
mmc: sdhci: Clear unused bounce buffer at DMA mmap error path
phy: intel: Fix for warnings due to EMMC clock 175Mhz change in FIP
mmc: sdhci-of-arasan: Use clock-frequency property to update clk_xin
mmc: core: clear flags before allowing to retune
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio updates from Bartosz Golaszewski:
"One new driver, support for new models in existing ones, dt-bindings
conversions for several modules and improvements all over the place.
Summary:
- new driver for the IDT 79RC3243x GPIO controller
- device tree bindings coversion to YAML for the following drivers:
gpio-rk3328-grf, gpio-omap, gpio-davinci, gpio-zynq, gpio-stp,
gpio-pcf857x
- cleanup of probe functions in many drivers from Alexandru Ardelean,
mostly dropping unnecessary calls to platform_set_drvdata() and
removing error messages where none are needed (handled by the
subsystem already)
- several improvements to the core gpiolib and the sysfs interface
code from Andy Shevchenko
- conversion of the gpio-xilinx driver to using the bitmap API +
improvements of suspend/resume handling + minor tweaks
- convert the gpio-stmpe to using devres helpers exclusively in probe
for improved robustness
- updates for the generic gpio-regmap driver
- updates for the gpio-dwapb driver
- support for a new model in gpio-pca953x
- cleanups in gpio-tegra186, gpio-104-idio-16, gpio-mxs & gpio-xgene
- slight code refactoring of the gpio-zynq driver
- documentation fixes from Mauro Carvalho Chehab
- a bunch of minor tweaks and improvements all over the place"
* tag 'gpio-updates-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (57 commits)
docs: driver-api: gpio: using-gpio.rst: avoid using ReST :doc:`foo` markup
dt-bindings: gpio: pcf857x: Convert to json-schema
gpio: mxs: Prefer unsigned int to bare use of unsigned
dt-bindings: gpio: stp: convert to json-schema
dt-bindings: gpio: zynq: convert bindings to YAML
dt-bindings: gpio: gpio-davinci: Convert to json-schema
gpio: pca953x: Add support for the On Semi pca9655
gpio: gpio-xilinx: update on suspend and resume calls
gpio: zynq: Check return value of irq_get_irq_data
gpio: zynq: Check return value of pm_runtime_get_sync
gpio: zynq: use module_platform_driver to simplify the code
gpio: idt3243x: Fix return value check in idt_gpio_probe()
MAINTAINERS: update ti,omap-gpio.yaml reference
dt-bindings: gpio: Add devicetree binding for IDT 79RC32434 GPIO controller
gpio: Add support for IDT 79RC3243x GPIO controller
gpio: regmap: move drvdata to config data
gpio-dwapb: Drop unused headers and sort the rest
gpio: gpio-regmap: Use devm_add_action_or_reset()
gpio: dwapb: Switch to use fwnode_irq_get()
gpio: dwapb: Drop redundant check in dwapb_irq_set_type()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input updates from Dmitry Torokhov:
- a new driver for SparkFun Qwiic Joystick
- pm8941-pwrkey driver now supports PMK8350
- a bunch of assorted driver fixes
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (44 commits)
Input: joydev - prevent use of not validated data in JSIOCSBTNMAP ioctl
Input: hideep - fix the uninitialized use in hideep_nvm_unlock()
Input: trackpoint - use kobj_to_dev()
Input: atkbd - use kobj_to_dev()
Input: tsc200x-core - use kobj_to_dev()
Input: ims-pcu - use kobj_to_dev()
Input: cros_ec_keyb - use kobj_to_dev() API
dt-bindings: input: touchscreen: st1232: Convert to json-schema
Input: i8042 - fix typos in comments
Input: add SparkFun Qwiic Joystick driver
dt-bindings: Add vendor prefix and bindings for Qwiic Joystick
Input: cy8ctmg110_ts - switch to using gpiod API
Input: cy8ctmg110_ts - switch to using managed resources
Input: cy8ctmg110_ts - use endian helpers when converting data on wire
Input: cy8ctmg110_ts - let I2C core configure wake interrupt
Input: cy8ctmg110_ts - do not hardcode as wakeup source
Input: cy8ctmg110_ts - do not hard code interrupt trigger
Input: cy8ctmg110_ts - rely on platform code to supply interrupt
Input: resistive-adc-touch - fix uninitialized variable 'press'
Input: pm8941-pwrkey - add support for PMK8350 PON_HLOS PMIC peripheral
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Richard Weinberger:
"MTD core changes:
- Convert list_for_each to entry variant
- Use MTD_DEVICE_ATTR_RO/RW() helper macros
- Remove unnecessary OOM messages
- Potential NULL dereference in mtd_otp_size()
- Fix freeing of otp_info buffer
- Create partname and partid debug files for child MTDs
- tests:
- Remove redundant assignment to err
- Fix error return code in mtd_oobtest_init()
- Add OTP NVMEM provider support
- Allow specifying of_node
- Convert sysfs sprintf/snprintf family to sysfs_emit
Bindings changes:
- Convert ti,am654-hbmc.txt to YAML schema
- spi-nor: add otp property
- Add OTP bindings
- add YAML schema for the generic MTD bindings
- Add brcm,trx-magic
MTD device drivers changes:
- Add support for microchip 48l640 EERAM
- Remove superfluous "break"
- sm_ftl:
- Fix alignment of block comment
- nftl:
- Return -ENOMEM when kmalloc failed
- nftlcore:
- Remove set but rewrite variables
- phram:
- Fix error return code in phram_setup()
- plat-ram:
- Remove redundant dev_err call in platram_probe()
MTD parsers changes:
- Qcom:
- Fix leaking of partition name
- Redboot:
- Fix style issues
- Seek fis-index-block in the right node
- trx:
- Allow to use TRX parser on Mediatek SoCs
- Allow to specify brcm, trx-magic in DT
Raw NAND core:
- Allow SDR timings to be nacked
- Bring support for NV-DDR timings which involved a number of small
preparation changes to bring new helpers, properly introduce NV-DDR
structures, fill them, differenciate them and pick the best timing
set.
- Add the necessary infrastructure to parse the new gpio-cs property
which aims at enlarging the number of available CS when a hardware
controller is too constrained.
- Update dead URL
- Silence static checker warning in nand_setup_interface()
- BBT:
- Fix corner case in bad block table handling
- onfi:
- Use more recent ONFI specification wording
- Use the BIT() macro when possible
Raw NAND controller drivers:
- Atmel:
- Ensure the data interface is supported.
- Arasan:
- Finer grain NV-DDR configuration
- Rename the data interface register
- Use the right DMA mask
- Leverage additional GPIO CS
- Ensure proper configuration for the asserted target
- Add support for the NV-DDR interface
- Fix a macro parameter
- brcmnand:
- Convert bindings to json-schema
- OMAP:
- Various fixes and style improvements
- Add larger page NAND chips support
- PL35X:
- New driver
- QCOM:
- Avoid writing to obsolete register
- Delete an unneeded bool conversion
- Allow override of partition parser
- Marvell:
- Minor documentation correction
- Add missing clk_disable_unprepare() on error in
marvell_nfc_resume()
- R852:
- Use DEVICE_ATTR_RO() helper macro
- MTK:
- Remove redundant dev_err call in mtk_ecc_probe()
- HISI504:
- Remove redundant dev_err call in probe
SPI-NAND core:
- Light reorganisation for the introduction of a core resume handler
- Fix double counting of ECC stats
SPI-NAND manufacturer drivers:
- Macronix:
- Add support for serial NAND flash
SPI NOR core changes:
- Ability to dump SFDP tables via sysfs
- Support for erasing OTP regions on Winbond and similar flashes
- Few API doc updates and fixes
- Locking support for MX25L12805D
SPI NOR controller drivers changes:
- Use SPI_MODE_X_MASK in nxp-spifi
- Intel Alder Lake-M SPI serial flash support"
* tag 'mtd/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (125 commits)
mtd: spi-nor: remove redundant continue statement
mtd: rawnand: omap: Add larger page NAND chips support
mtd: rawnand: omap: Various style fixes
mtd: rawnand: omap: Check return values
mtd: rawnand: omap: Rename a macro
mtd: rawnand: omap: Aggregate the HW configuration of the ELM
mtd: rawnand: pl353: Add support for the ARM PL353 SMC NAND controller
dt-bindings: mtd: pl353-nand: Describe this hardware controller
MAINTAINERS: Add PL353 NAND controller entry
mtd: rawnand: qcom: avoid writing to obsolete register
mtd: rawnand: marvell: Minor documentation correction
mtd: rawnand: r852: use DEVICE_ATTR_RO() helper macro
mtd: spinand: add SPI-NAND MTD resume handler
mtd: spinand: Add spinand_init_flash() helper
mtd: spinand: add spinand_read_cfg() helper
mtd: rawnand: marvell: add missing clk_disable_unprepare() on error in marvell_nfc_resume()
mtd: rawnand: arasan: Finer grain NV-DDR configuration
mtd: rawnand: arasan: Rename the data interface register
mtd: rawnand: onfi: Fix endianness when reading NV-DDR values
mtd: rawnand: arasan: Use the right DMA mask
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
Pull m68knommu update from Greg Ungerer:
"Fix fix missing LCD splash screen data initializer"
* tag 'm68knommu-for-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: fix missing LCD splash screen data initializer
|
|
To pick the changes in these csets:
64c2c2c62f92339b ("quota: Change quotactl_path() systcall to an fd-based one")
65ffb3d69ed3da28 ("quota: Wire up quotactl_fd syscall")
That silences these perf build warnings and add support for those new
syscalls in tools such as 'perf trace'.
For instance, this is now possible:
# perf trace -v -e quota*
event qualifier tracepoint filter: (common_pid != 158365 && common_pid != 2512) && (id == 179 || id == 443)
^C#
That is the filter expression attached to the raw_syscalls:sys_{enter,exit}
tracepoints.
$ grep quota tools/perf/arch/x86/entry/syscalls/syscall_64.tbl
179 common quotactl sys_quotactl
443 common quotactl_fd sys_quotactl_fd
$
This addresses these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
Warning: Kernel ABI header at 'tools/perf/arch/x86/entry/syscalls/syscall_64.tbl' differs from latest version at 'arch/x86/entry/syscalls/syscall_64.tbl'
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
Warning: Kernel ABI header at 'tools/perf/arch/powerpc/entry/syscalls/syscall.tbl' differs from latest version at 'arch/powerpc/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/s390/entry/syscalls/syscall.tbl' differs from latest version at 'arch/s390/kernel/syscalls/syscall.tbl'
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
Warning: Kernel ABI header at 'tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl' differs from latest version at 'arch/mips/kernel/syscalls/syscall_n64.tbl'
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
Cc: Jan Kara <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix some spelling mistakes as follows:
sensitivies ==> sensitivities
pararameters ==> parameters
approxmimation ==> approximation
silet ==> silent
Signed-off-by: gushengxian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Fix some spelling mistakes as follows:
altenate ==> alternate
compatbile ==> compatible
perfoms ==> performs
dont'register ==> don't register
periodicaly ==> periodically
arount ==> around
Signed-off-by: gushengxian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
ALSA bebob driver has duplicated entries for modalias of
'ieee1394:ven00000AACmo00000002sp0000A02Dver00010001' since entries for
two devices below have the same parameters:
* Acoustic Reality eAR Master One, Eroica, Figaro, and Ciaccona
* TerraTec Aureon 7.1 FireWire
I relied on FFADO revision 737 to add the former entry, on the other hand,
the latter is based on message posted by actual user with information of
sysfs node:
* https://sourceforge.net/p/ffado/mailman/ffado-user/thread/5743F969.2080204%40marcobaldo.ch/
It appears that they have OUI of Terratec Electronic GmbH (0x000aac) and
the same model ID, thus suffice to say that they have something common
in their internals.
Although it's not going to make a big difference, this commit arranges
the entries.
Signed-off-by: Takashi Sakamoto <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
To pick the changes from:
Fixes: 4ca9b3859dac14bb ("mm/madvise: introduce MADV_POPULATE_(READ|WRITE) to prefault page tables")
That result in these changes in the tools:
$ tools/perf/trace/beauty/madvise_behavior.sh > before
$ cp include/uapi/asm-generic/mman-common.h tools/include/uapi/asm-generic/mman-common.h
$ tools/perf/trace/beauty/madvise_behavior.sh > after
$ diff -u before after
--- before 2021-07-05 14:30:15.167212621 -0300
+++ after 2021-07-05 14:30:26.638462594 -0300
@@ -18,6 +18,8 @@
[19] = "KEEPONFORK",
[20] = "COLD",
[21] = "PAGEOUT",
+ [22] = "POPULATE_READ",
+ [23] = "POPULATE_WRITE",
[100] = "HWPOISON",
[101] = "SOFT_OFFLINE",
};
$
I.e. now when madvise gets those behaviours as args, it will be able to
translate from the number to a human readable string.
This addresses the following perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/mman-common.h' differs from latest version at 'include/uapi/asm-generic/mman-common.h'
diff -u tools/include/uapi/asm-generic/mman-common.h include/uapi/asm-generic/mman-common.h
Cc: David Hildenbrand <[email protected]>
Cc: Linus Torvalds <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Fix some spelling mistakes as follows:
wroong ==> wrong
evrything ==> everything
Signed-off-by: gushengxian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Fix some spelling mistakes as follows:
regiter ==> register
confgiuration ==> configuration
playabck ==> playback
platoform ==> platform
Signed-off-by: gushengxian <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The HP Pavilion 15-eh1xxx series uses the HP mainboard 88D0 with ALC287 and needs
the ALC287_FIXUP_HP_GPIO_LED quirk to make the mute led working.
Tested with a HP Pavilion 15-eh1557ng.
Signed-off-by: Frank Schäfer <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Picking the changes from:
2e290c8d8d29278b ("drm: document minimum kernel version for DRM_CLIENT_CAP_*")
bbf4627ba6415711 ("drm: clarify and linkify DRM_CLIENT_CAP_WRITEBACK_CONNECTORS docs")
88938bf343efbc4d ("drm: reference mode flags in DRM_CLIENT_CAP_* docs")
Silencing these perf build warnings:
Warning: Kernel ABI header at 'tools/include/uapi/drm/drm.h' differs from latest version at 'include/uapi/drm/drm.h'
diff -u tools/include/uapi/drm/drm.h include/uapi/drm/drm.h
No changes in tooling as these are just C comment documentation changes.
Cc: Simon Ser <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the changes in:
2459e56fd8af0b47 ("drm/i915/uapi: implement object placement extension")
ebcb40298947bdb0 ("drm/i915/uapi: introduce drm_i915_gem_create_ext")
710217292a61110a ("drm/i915/query: Expose memory regions through the query uAPI")
e3bdccafb5bcfab2 ("drm/i915/uapi: convert i915_query and friend to kernel doc")
19d053d477a14506 ("drm/i915/uapi: convert i915_user_extension to kernel doc")
2ef6a01fb636997b ("drm/i915/uapi: fix kernel doc warnings")
That picks a new ioctl:
$ tools/perf/trace/beauty/drm_ioctl.sh > before
$ cp include/uapi/drm/i915_drm.h tools/include/uapi/drm/i915_drm.h
$ tools/perf/trace/beauty/drm_ioctl.sh > after
$ diff -u before after
--- before 2021-07-05 14:25:13.247680316 -0300
+++ after 2021-07-05 14:25:22.454874111 -0300
@@ -166,4 +166,5 @@
[DRM_COMMAND_BASE + 0x39] = "I915_QUERY",
[DRM_COMMAND_BASE + 0x3a] = "I915_GEM_VM_CREATE",
[DRM_COMMAND_BASE + 0x3b] = "I915_GEM_VM_DESTROY",
+ [DRM_COMMAND_BASE + 0x3c] = "I915_GEM_CREATE_EXT",
};
$
Addressing this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/drm/i915_drm.h' differs from latest version at 'include/uapi/drm/i915_drm.h'
diff -u tools/include/uapi/drm/i915_drm.h include/uapi/drm/i915_drm.h
Cc: Abdiel Janulgue <[email protected]>
Cc: Matthew Auld <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Picking the changes from:
08fdced60ca08e34 ("ALSA: rawmidi: Add framing mode")
Which entails no changes in the tooling side as it doesn't introduce new
ioctls.
To silence this perf tools build warning:
Warning: Kernel ABI header at 'tools/include/uapi/sound/asound.h' differs from latest version at 'include/uapi/sound/asound.h'
diff -u tools/include/uapi/sound/asound.h include/uapi/sound/asound.h
Cc: David Henningsson <[email protected]>
Cc: Takashi Iwai <[email protected]>
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Recently bperf was added to use BPF to count perf events for various
purposes. This is an extension for the approach and targetting to
cgroup usages.
Unlike the other bperf, it doesn't share the events with other
processes but it'd reduce unnecessary events (and the overhead of
multiplexing) for each monitored cgroup within the perf session.
When --for-each-cgroup is used with --bpf-counters, it will open
cgroup-switches event per cpu internally and attach the new BPF
program to read given perf_events and to aggregate the results for
cgroups. It's only called when task is switched to a task in a
different cgroup.
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Song Liu <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Stephane Eranian <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Current 'perf report' fails to process a pipe input when --task or
--stat options are used. This is because they reset all the tool
callbacks and fails to find a matching event for a sample.
When pipe input is used, the event info is passed via ATTR records so it
needs to handle that operation. Otherwise the following error occurs.
Note, -14 (= -EFAULT) comes from evlist__parse_sample():
# perf record -a -o- sleep 1 | perf report -i- --stat
Can't parse sample, err = -14
0x271044 [0x38]: failed to process type: 9
Error:
failed to process sample
#
Committer testing:
Before:
$ perf record -o- sleep 1 | perf report -i- --stat
Can't parse sample, err = -14
[ perf record: Woken up 1 times to write data ]
0x1350 [0x30]: failed to process type: 9
Error:
failed to process sample
[ perf record: Captured and wrote 0.000 MB - ]
$
After:
$ perf record -o- sleep 1 | perf report -i- --stat
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.000 MB - ]
Aggregated stats:
TOTAL events: 41
COMM events: 2 ( 4.9%)
EXIT events: 1 ( 2.4%)
SAMPLE events: 9 (22.0%)
MMAP2 events: 4 ( 9.8%)
ATTR events: 1 ( 2.4%)
FINISHED_ROUND events: 1 ( 2.4%)
THREAD_MAP events: 1 ( 2.4%)
CPU_MAP events: 1 ( 2.4%)
EVENT_UPDATE events: 1 ( 2.4%)
TIME_CONV events: 1 ( 2.4%)
FEATURE events: 19 (46.3%)
cycles:uhH stats:
SAMPLE events: 9
$
Fixes: a4a4d0a7a2b20f78 ("perf report: Add --stats option to display quick data statistics")
Signed-off-by: Namhyung Kim <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
On trogdor devices I see the following lockdep splat when stopping
youtube with lockdep enabled in the kernel.
======================================================
WARNING: possible circular locking dependency detected
5.13.0-rc2 #71 Not tainted
------------------------------------------------------
ThreadPoolSingl/3969 is trying to acquire lock:
ffffff80d4d5c080 (&inst->lock#3){+.+.}-{3:3}, at: vdec_buf_cleanup+0x3c/0x17c [venus_dec]
but task is already holding lock:
ffffff80d3c3c4f8 (&q->mmap_lock){+.+.}-{3:3}, at: vb2_core_reqbufs+0xe4/0x390 [videobuf2_common]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #5 (&q->mmap_lock){+.+.}-{3:3}:
__mutex_lock_common+0xcc/0xb88
mutex_lock_nested+0x5c/0x68
vb2_mmap+0xf4/0x290 [videobuf2_common]
v4l2_m2m_fop_mmap+0x44/0x50 [v4l2_mem2mem]
v4l2_mmap+0x5c/0xa4
mmap_region+0x310/0x5a4
do_mmap+0x348/0x43c
vm_mmap_pgoff+0xfc/0x178
ksys_mmap_pgoff+0x84/0xfc
__arm64_compat_sys_aarch32_mmap2+0x2c/0x38
invoke_syscall+0x54/0x110
el0_svc_common+0x88/0xf0
do_el0_svc_compat+0x28/0x34
el0_svc_compat+0x24/0x34
el0_sync_compat_handler+0xc0/0xf0
el0_sync_compat+0x19c/0x1c0
-> #4 (&mm->mmap_lock){++++}-{3:3}:
__might_fault+0x60/0x88
filldir64+0x124/0x3a0
dcache_readdir+0x7c/0x1ec
iterate_dir+0xc4/0x184
__arm64_sys_getdents64+0x78/0x170
invoke_syscall+0x54/0x110
el0_svc_common+0xa8/0xf0
do_el0_svc_compat+0x28/0x34
el0_svc_compat+0x24/0x34
el0_sync_compat_handler+0xc0/0xf0
el0_sync_compat+0x19c/0x1c0
-> #3 (&sb->s_type->i_mutex_key#3){++++}-{3:3}:
down_write+0x94/0x1f4
start_creating+0xb0/0x174
debugfs_create_dir+0x28/0x138
opp_debug_register+0x88/0xc0
_add_opp_dev+0x84/0x9c
_add_opp_table_indexed+0x16c/0x310
_of_add_table_indexed+0x70/0xb5c
dev_pm_opp_of_add_table_indexed+0x20/0x2c
of_genpd_add_provider_onecell+0xc4/0x1c8
rpmhpd_probe+0x21c/0x278
platform_probe+0xb4/0xd4
really_probe+0x140/0x35c
driver_probe_device+0x90/0xcc
__device_attach_driver+0xa4/0xc0
bus_for_each_drv+0x8c/0xd8
__device_attach+0xc4/0x150
device_initial_probe+0x20/0x2c
bus_probe_device+0x40/0xa4
device_add+0x22c/0x3fc
of_device_add+0x44/0x54
of_platform_device_create_pdata+0xb0/0xf4
of_platform_bus_create+0x1d0/0x350
of_platform_populate+0x80/0xd4
devm_of_platform_populate+0x64/0xb0
rpmh_rsc_probe+0x378/0x3dc
platform_probe+0xb4/0xd4
really_probe+0x140/0x35c
driver_probe_device+0x90/0xcc
__device_attach_driver+0xa4/0xc0
bus_for_each_drv+0x8c/0xd8
__device_attach+0xc4/0x150
device_initial_probe+0x20/0x2c
bus_probe_device+0x40/0xa4
device_add+0x22c/0x3fc
of_device_add+0x44/0x54
of_platform_device_create_pdata+0xb0/0xf4
of_platform_bus_create+0x1d0/0x350
of_platform_bus_create+0x21c/0x350
of_platform_populate+0x80/0xd4
of_platform_default_populate_init+0xb8/0xd4
do_one_initcall+0x1b4/0x400
do_initcall_level+0xa8/0xc8
do_initcalls+0x5c/0x9c
do_basic_setup+0x2c/0x38
kernel_init_freeable+0x1a4/0x1ec
kernel_init+0x20/0x118
ret_from_fork+0x10/0x30
-> #2 (gpd_list_lock){+.+.}-{3:3}:
__mutex_lock_common+0xcc/0xb88
mutex_lock_nested+0x5c/0x68
__genpd_dev_pm_attach+0x70/0x18c
genpd_dev_pm_attach_by_id+0xe4/0x158
genpd_dev_pm_attach_by_name+0x48/0x60
dev_pm_domain_attach_by_name+0x2c/0x38
dev_pm_opp_attach_genpd+0xac/0x160
vcodec_domains_get+0x94/0x14c [venus_core]
core_get_v4+0x150/0x188 [venus_core]
venus_probe+0x138/0x444 [venus_core]
platform_probe+0xb4/0xd4
really_probe+0x140/0x35c
driver_probe_device+0x90/0xcc
device_driver_attach+0x58/0x7c
__driver_attach+0xc8/0xe0
bus_for_each_dev+0x88/0xd4
driver_attach+0x30/0x3c
bus_add_driver+0x10c/0x1e0
driver_register+0x70/0x108
__platform_driver_register+0x30/0x3c
0xffffffde113e1044
do_one_initcall+0x1b4/0x400
do_init_module+0x64/0x1fc
load_module+0x17f4/0x1958
__arm64_sys_finit_module+0xb4/0xf0
invoke_syscall+0x54/0x110
el0_svc_common+0x88/0xf0
do_el0_svc_compat+0x28/0x34
el0_svc_compat+0x24/0x34
el0_sync_compat_handler+0xc0/0xf0
el0_sync_compat+0x19c/0x1c0
-> #1 (&opp_table->genpd_virt_dev_lock){+.+.}-{3:3}:
__mutex_lock_common+0xcc/0xb88
mutex_lock_nested+0x5c/0x68
_set_required_opps+0x74/0x120
_set_opp+0x94/0x37c
dev_pm_opp_set_rate+0xa0/0x194
core_clks_set_rate+0x28/0x58 [venus_core]
load_scale_v4+0x228/0x2b4 [venus_core]
session_process_buf+0x160/0x198 [venus_core]
venus_helper_vb2_buf_queue+0xcc/0x130 [venus_core]
vdec_vb2_buf_queue+0xc4/0x140 [venus_dec]
__enqueue_in_driver+0x164/0x188 [videobuf2_common]
vb2_core_qbuf+0x13c/0x47c [videobuf2_common]
vb2_qbuf+0x88/0xec [videobuf2_v4l2]
v4l2_m2m_qbuf+0x84/0x15c [v4l2_mem2mem]
v4l2_m2m_ioctl_qbuf+0x24/0x30 [v4l2_mem2mem]
v4l_qbuf+0x54/0x68
__video_do_ioctl+0x2bc/0x3bc
video_usercopy+0x558/0xb04
video_ioctl2+0x24/0x30
v4l2_ioctl+0x58/0x68
v4l2_compat_ioctl32+0x84/0xa0
__arm64_compat_sys_ioctl+0x12c/0x140
invoke_syscall+0x54/0x110
el0_svc_common+0x88/0xf0
do_el0_svc_compat+0x28/0x34
el0_svc_compat+0x24/0x34
el0_sync_compat_handler+0xc0/0xf0
el0_sync_compat+0x19c/0x1c0
-> #0 (&inst->lock#3){+.+.}-{3:3}:
__lock_acquire+0x248c/0x2d6c
lock_acquire+0x240/0x314
__mutex_lock_common+0xcc/0xb88
mutex_lock_nested+0x5c/0x68
vdec_buf_cleanup+0x3c/0x17c [venus_dec]
__vb2_queue_free+0x98/0x204 [videobuf2_common]
vb2_core_reqbufs+0x14c/0x390 [videobuf2_common]
vb2_reqbufs+0x58/0x74 [videobuf2_v4l2]
v4l2_m2m_reqbufs+0x58/0x90 [v4l2_mem2mem]
v4l2_m2m_ioctl_reqbufs+0x24/0x30 [v4l2_mem2mem]
v4l_reqbufs+0x58/0x6c
__video_do_ioctl+0x2bc/0x3bc
video_usercopy+0x558/0xb04
video_ioctl2+0x24/0x30
v4l2_ioctl+0x58/0x68
v4l2_compat_ioctl32+0x84/0xa0
__arm64_compat_sys_ioctl+0x12c/0x140
invoke_syscall+0x54/0x110
el0_svc_common+0x88/0xf0
do_el0_svc_compat+0x28/0x34
el0_svc_compat+0x24/0x34
el0_sync_compat_handler+0xc0/0xf0
el0_sync_compat+0x19c/0x1c0
other info that might help us debug this:
Chain exists of:
&inst->lock#3 --> &mm->mmap_lock --> &q->mmap_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&q->mmap_lock);
lock(&mm->mmap_lock);
lock(&q->mmap_lock);
lock(&inst->lock#3);
*** DEADLOCK ***
1 lock held by ThreadPoolSingl/3969:
#0: ffffff80d3c3c4f8 (&q->mmap_lock){+.+.}-{3:3}, at: vb2_core_reqbufs+0xe4/0x390 [videobuf2_common]
stack backtrace:
CPU: 2 PID: 3969 Comm: ThreadPoolSingl Not tainted 5.13.0-rc2 #71
Hardware name: Google Lazor (rev3+) with KB Backlight (DT)
Call trace:
dump_backtrace+0x0/0x1b4
show_stack+0x24/0x30
dump_stack+0xe0/0x15c
print_circular_bug+0x32c/0x388
check_noncircular+0x138/0x140
__lock_acquire+0x248c/0x2d6c
lock_acquire+0x240/0x314
__mutex_lock_common+0xcc/0xb88
mutex_lock_nested+0x5c/0x68
vdec_buf_cleanup+0x3c/0x17c [venus_dec]
__vb2_queue_free+0x98/0x204 [videobuf2_common]
vb2_core_reqbufs+0x14c/0x390 [videobuf2_common]
vb2_reqbufs+0x58/0x74 [videobuf2_v4l2]
v4l2_m2m_reqbufs+0x58/0x90 [v4l2_mem2mem]
v4l2_m2m_ioctl_reqbufs+0x24/0x30 [v4l2_mem2mem]
v4l_reqbufs+0x58/0x6c
__video_do_ioctl+0x2bc/0x3bc
video_usercopy+0x558/0xb04
video_ioctl2+0x24/0x30
v4l2_ioctl+0x58/0x68
v4l2_compat_ioctl32+0x84/0xa0
__arm64_compat_sys_ioctl+0x12c/0x140
invoke_syscall+0x54/0x110
el0_svc_common+0x88/0xf0
do_el0_svc_compat+0x28/0x34
el0_svc_compat+0x24/0x34
el0_sync_compat_handler+0xc0/0xf0
el0_sync_compat+0x19c/0x1c0
The 'gpd_list_lock' is nominally named as such to protect the 'gpd_list'
from concurrent access and mutation. Unfortunately, holding that mutex
around various OPP framework calls leads to lockdep splats because now
we're doing various operations in OPP core such as registering with
debugfs while holding the list lock. We don't need to hold any list
mutex while we're calling into OPP, so let's shrink the locking area of
the 'gpd_list_lock' so that lockdep isn't triggered. This also helps
reduce contention on this lock, which probably doesn't matter much but
at least is nice to have.
Cc: Len Brown <[email protected]>
Cc: Pavel Machek <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: <[email protected]>
Cc: Viresh Kumar <[email protected]>
Signed-off-by: Stephen Boyd <[email protected]>
Reviewed-by: Ulf Hansson <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Although it compiles, the test robot correctly noted:
'cifsacl.h' file not found with <angled> include; use "quotes" instead
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Use DISABLE_BRANCH_PROFILING for arch/mips/boot/compressed/decompress.o
to prevent linkage errors.
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `LZ4_decompress_fast_extDict':
decompress.c:(.text+0x8c): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0xf4): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x200): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x230): undefined reference to `ftrace_likely_update'
mips64-linux-ld: decompress.c:(.text+0x320): undefined reference to `ftrace_likely_update'
mips64-linux-ld: arch/mips/boot/compressed/decompress.o:decompress.c:(.text+0x3f4): more undefined references to `ftrace_likely_update' follow
Fixes: e76e1fdfa8f8 ("lib: add support for LZ4-compressed kernel")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Randy Dunlap <[email protected]>
Cc: Thomas Bogendoerfer <[email protected]>
Cc: [email protected]
Cc: Kyungsik Lee <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
My series to clean up the unaligned access implementation
across architectures caused some mips randconfig builds to
fail with:
mips64-linux-ld: arch/mips/boot/compressed/decompress.o: in function `decompress_kernel':
decompress.c:(.text.decompress_kernel+0x54): undefined reference to `__bswapsi2'
It turns out that this problem has already been fixed for the XZ
decompressor but now it also shows up in (at least) LZO and LZ4. From my
analysis I concluded that the compiler could always have emitted those
calls, but the different implementation allowed it to make otherwise
better decisions about not inlining the byteswap, which results in the
link error when the out-of-line code is missing.
While it could be addressed by adding it to the two decompressor
implementations that are known to be affected, but as this only adds
112 bytes to the kernel, the safer choice is to always add them.
Fixes: c50ec6787536 ("MIPS: zboot: Fix the build with XZ compression on older GCC versions")
Fixes: 0652035a5794 ("asm-generic: unaligned: remove byteshift helpers")
Link: https://lore.kernel.org/linux-mm/[email protected]/
Link: https://lore.kernel.org/linux-mm/[email protected]/
Link: https://lore.kernel.org/linux-mm/[email protected]/
Link: https://lore.kernel.org/linux-mm/[email protected]/
Signed-off-by: Arnd Bergmann <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
This is a smatch warning:
arch/powerpc/sysdev/xive/common.c:1161 xive_request_ipi() warn: unsigned 'xid->irq' is never less than zero.
Fixes: fd6db2892eba ("powerpc/xive: Modernize XIVE-IPI domain with an 'alloc' handler")
Cc: [email protected] # v5.13
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Cédric Le Goater <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Commit 91c960b0056672 ("bpf: Rename BPF_XADD and prepare to encode other
atomics in .imm") converted BPF_XADD to BPF_ATOMIC and updated all JIT
implementations to reject JIT'ing instructions with an immediate value
different from BPF_ADD. However, ppc32 BPF JIT was implemented around
the same time and didn't include the same change. Update the ppc32 JIT
accordingly.
Fixes: 51c66ad849a7 ("powerpc/bpf: Implement extended BPF on PPC32")
Cc: [email protected] # v5.13+
Signed-off-by: Naveen N. Rao <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/426699046d89fe50f66ecf74bd31c01eda976ba5.1625145429.git.naveen.n.rao@linux.vnet.ibm.com
|
|
Commit 91c960b0056672 ("bpf: Rename BPF_XADD and prepare to encode other
atomics in .imm") converted BPF_XADD to BPF_ATOMIC and added a way to
distinguish instructions based on the immediate field. Existing JIT
implementations were updated to check for the immediate field and to
reject programs utilizing anything more than BPF_ADD (such as BPF_FETCH)
in the immediate field.
However, the check added to powerpc64 JIT did not look at the correct
BPF instruction. Due to this, such programs would be accepted and
incorrectly JIT'ed resulting in soft lockups, as seen with the atomic
bounds test. Fix this by looking at the correct immediate value.
Fixes: 91c960b0056672 ("bpf: Rename BPF_XADD and prepare to encode other atomics in .imm")
Reported-by: Jiri Olsa <[email protected]>
Signed-off-by: Naveen N. Rao <[email protected]>
Tested-by: Jiri Olsa <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/4117b430ffaa8cd7af042496f87fd7539e4f17fd.1625145429.git.naveen.n.rao@linux.vnet.ibm.com
|
|
The powerpc kernel is not prepared to handle exec faults from kernel.
Especially, the function is_exec_fault() will return 'false' when an
exec fault is taken by kernel, because the check is based on reading
current->thread.regs->trap which contains the trap from user.
For instance, when provoking a LKDTM EXEC_USERSPACE test,
current->thread.regs->trap is set to SYSCALL trap (0xc00), and
the fault taken by the kernel is not seen as an exec fault by
set_access_flags_filter().
Commit d7df2443cd5f ("powerpc/mm: Fix spurious segfaults on radix
with autonuma") made it clear and handled it properly. But later on
commit d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute
faults") removed that handling, introducing test based on error_code.
And here is the problem, because on the 603 all upper bits of SRR1
get cleared when the TLB instruction miss handler bails out to ISI.
Until commit cbd7e6ca0210 ("powerpc/fault: Avoid heavy
search_exception_tables() verification"), an exec fault from kernel
at a userspace address was indirectly caught by the lack of entry for
that address in the exception tables. But after that commit the
kernel mainly relies on KUAP or on core mm handling to catch wrong
user accesses. Here the access is not wrong, so mm handles it.
It is a minor fault because PAGE_EXEC is not set,
set_access_flags_filter() should set PAGE_EXEC and voila.
But as is_exec_fault() returns false as explained in the beginning,
set_access_flags_filter() bails out without setting PAGE_EXEC flag,
which leads to a forever minor exec fault.
As the kernel is not prepared to handle such exec faults, the thing to
do is to fire in bad_kernel_fault() for any exec fault taken by the
kernel, as it was prior to commit d3ca587404b3.
Fixes: d3ca587404b3 ("powerpc/mm: Fix reporting of kernel execute faults")
Cc: [email protected] # v4.14+
Signed-off-by: Christophe Leroy <[email protected]>
Acked-by: Nicholas Piggin <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Link: https://lore.kernel.org/r/024bb05105050f704743a0083fe3548702be5706.1625138205.git.christophe.leroy@csgroup.eu
|
|
FTRACE_ADDR is only defined when CONFIG_DYNAMIC_FTRACE is defined, the
latter is even stronger requirement than CONFIG_FUNCTION_TRACER (which is
enough for MCOUNT_ADDR).
Link: https://lists.01.org/hyperkitty/list/[email protected]/thread/ZUVCQBHDMFVR7CCB7JPESLJEWERZDJ3T/
Fixes: 1f12fb25c5c5d22f ("ARM: 9079/1: ftrace: Add MODULE_PLTS support")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Alexander Sverdlin <[email protected]>
Signed-off-by: Russell King <[email protected]>
|
|
This patch provides support for new dynamic AP bus message limit
with the existing zcrypt device driver and AP bus core code.
There is support for a new field 'ml' from TAPQ query. The field
gives if != 0 the AP bus limit for this card in 4k chunk units.
The actual message size limit per card is shown as a new read-only
sysfs attribute. The sysfs attribute
/sys/devices/ap/cardxx/max_msg_size
shows the upper limit in bytes used by the AP bus and zcrypt device
driver for requests and replies send to and received from this card.
Currently up to CEX7 support only max 12kB msg size and thus the field
shows 12288 meaning the upper limit of a valid msg for this card is
12kB. Please note that the usable payload is somewhat lower and
depends on the msg type and thus the header struct which is to be
prepended by the zcrypt dd.
The dispatcher responsible for choosing the right card and queue is
aware of the individual card AP bus message limit. So a request is
only assigned to a queue of a card which is able to handle the size of
the request (e.g. a 14kB request will never go to a max 12kB card).
If no such card is found the ioctl will fail with ENODEV.
The reply buffer held by the device driver is determined by the ml
field of the TAPQ for this card. If a response from the card exceeds
this limit however, the response is not truncated but the ioctl for
this request will fail with errno EMSGSIZE to indicate that the device
driver has dropped the response because it would overflow the buffer
limit.
If the request size does not indicate to the dispatcher that an
adapter with extended limit is to be used, a random card will be
chosen when no specific card is addressed (ANY addressing). This may
result in an ioctl failure when the reply size needs an adapter with
extended limit but the randomly chosen one is not capable of handling
the broader reply size. The user space application needs to use
dedicated addressing to forward such a request only to suitable cards
to get requests like this processed properly.
Signed-off-by: Harald Freudenberger <[email protected]>
Reviewed-by: Ingo Tuchscherer <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
"dummy" is not only used as output but also as input. Therefore use
the correct "+" constraint modifier.
Fixes: 8cf23c8e1fec ("s390/lib,string: get rid of register asm")
Reported-by: Sven Schnelle <[email protected]>
Signed-off-by: Heiko Carstens <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|