| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Pull virtio fixes from Michael Tsirkin:
"Some last minute fixes.
The virtio-blk one is the most important one since it was actually
seen in the field, but the rest of them are small and clearly safe,
everything here has been in next for a while"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Fix MQ to support non power of two num queues
vduse: prevent uninitialized memory accesses
virtio-blk: Fix WARN_ON_ONCE in virtio_queue_rq()
virtio_test: fixup for vq reset
virtio-crypto: fix memory-leak
vdpa/ifcvf: fix the calculation of queuepair
|
|
Pull block fixes from Jens Axboe:
"A single NVMe pull request via Christoph with a few fixes that should
go into the 6.0 release:
- Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
(Michael Kelley)
- Disable Write Zeroes on Phison E3C/E4C (Tina Hsu)"
* tag 'block-6.0-2022-09-29' of git://git.kernel.dk/linux:
nvme-pci: disable Write Zeroes on Phison E3C/E4C
nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
|
|
Pull io_uring fixes from Jens Axboe:
"Two fixes that should go into 6.0:
- Tweak the single issuer logic to register the task at creation,
rather than at first submit. SINGLE_ISSUER was added for 6.0, and
after some discussion on this, we decided to make it a bit stricter
while it's still possible to do so (Dylan).
- Stefan from Samba had some doubts on the level triggered poll that
was added for this release. Rather than attempt to mess around with
it now, just do the quick one-liner to disable it for release and
we have time to discuss and change it for 6.1 instead (me)"
* tag 'io_uring-6.0-2022-09-29' of git://git.kernel.dk/linux:
io_uring/poll: disable level triggered poll
io_uring: register single issuer task at creation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore revert from Kees Cook:
"A misbehavior with some compression backends in pstore was just
discovered due to the recent crypto acomp migration.
Since we're so close to release, it seems better to just simply revert
it, and we can figure out what's going on without leaving it broken
for a release.
- Revert crypto acomp migration (Guilherme G. Piccoli)"
* tag 'pstore-v6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Revert "pstore: migrate to crypto acomp interface"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"One more fix for the upcoming release:
- fix the check for pwm support on non-A8K platforms in gpio-mvebu"
* tag 'gpio-fixes-for-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mvebu: Fix check for pwm support on non-A8K platforms
|
|
This reverts commit e4f0a7ec586b7644107839f5394fb685cf1aadcc.
When using this new interface, both efi_pstore and ramoops
backends are unable to properly decompress dmesg if using
zstd, lz4 and lzo algorithms (and maybe more). It does succeed
with deflate though.
The message observed in the kernel log is:
[2.328828] pstore: crypto_acomp_decompress failed, ret = -22!
The pstore infrastructure is able to collect the dmesg with
both backends tested, but since decompression fails it's
unreadable. With this revert everything is back to normal.
Fixes: e4f0a7ec586b ("pstore: migrate to crypto acomp interface")
Cc: Ard Biesheuvel <[email protected]>
Signed-off-by: Guilherme G. Piccoli <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Pull drm fixes from Dave Airlie:
"Last set of fixes for 6.0 hopefully - minor bridge fixes, i915 fixes,
and a bunch of amdgpu fixes for new IP blocks, along with a couple of
regression fixes. Should be all set for merge window next week.
amdgpu:
- GC 11.x fixes
- SMU 13.x fixes
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- GC 9.x fix
- Fence fix
- SR-IOV supend/resume fix
- PSR regression fix
i915:
- Restrict forced preemption to the active context
- Restrict perf_limit_reasons to the supported platforms - gen11+
bridge:
- analogix: Revert earlier suspend fix
- lt8912b: Fix corrupt display output"
* tag 'drm-fixes-2022-09-30-1' of git://anongit.freedesktop.org/drm/drm: (26 commits)
drm/amd/display: Prevent OTG shutdown during PSR SU
drm/i915/gt: Perf_limit_reasons are only available for Gen11+
drm/amdgpu: Add amdgpu suspend-resume code path under SRIOV
drm/amdgpu: Remove fence_process in count_emitted
drm/amdgpu: Correct the position in patch_cond_exec
drm/amd/display: fill in clock values when DPM is not enabled
drm/amd/display: Avoid unnecessary pixel rate divider programming
drm/amd/display: Remove assert for odm transition case
drm/amd/display: Fix typo in get_pixel_rate_div
drm/amd/display: Fix audio on display after unplugging another
drm/amd/display: Add explicit FIFO disable for DP blank
drm/amd/display: Wrap OTG disable workaround with FIFO control
drm/amd/display: Do DIO FIFO enable after DP video stream enable
drm/amd/display: Update DCN32 to use new SR latencies
drm/amd/display: Avoid avoid unnecessary pixel rate divider programming
drm/amdkfd: fix dropped interrupt in kfd_int_process_v11
drm/amdgpu: pass queue size and is_aql_queue to MES
drm/amdkfd: fix MQD init for GFX11 in init_mqd
drm/amd/pm: use adverse selection for dpm features unsupported by driver
drm/amd/pm: enable gfxoff feature for SMU 13.0.0
...
|
|
Use macro definitions ___constant_swab64 and ___constant_swab32
to simplify __bswapdi2() and __bswapsi2().
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Silence the following two warnings when make W=1:
CC arch/mips/lib/bswapsi.o
arch/mips/lib/bswapsi.c:5:22: warning: no previous prototype for '__bswapsi2' [-Wmissing-prototypes]
unsigned int notrace __bswapsi2(unsigned int u)
^~~~~~~~~~
CC arch/mips/lib/bswapdi.o
arch/mips/lib/bswapdi.c:5:28: warning: no previous prototype for '__bswapdi2' [-Wmissing-prototypes]
unsigned long long notrace __bswapdi2(unsigned long long u)
^~~~~~~~~~
AR arch/mips/lib/built-in.a
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Tiezhu Yang <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Clean up config files by:
- removing configs that were deleted in the past
- removing configs not in tree and without recently pending patches
- adding new configs that are replacements for old configs in the file
For some detailed information, see Link.
Link: https://lore.kernel.org/kernel-janitors/[email protected]/
Signed-off-by: Lukas Bulwahn <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
|
|
Directly compare the expected versus observed hypercall instructions when
verifying that KVM patched in the native hypercall (FIX_HYPERCALL_INSN
quirk enabled). gcc rightly complains that doing a 4-byte memcpy() with
an "unsigned char" as the source generates an out-of-bounds accesses.
Alternatively, "exp" and "obs" could be declared as 3-byte arrays, but
there's no known reason to copy locally instead of comparing directly.
In function ‘assert_hypercall_insn’,
inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2:
x86_64/fix_hypercall_test.c:63:9: error: array subscript ‘unsigned int[0]’
is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds]
63 | memcpy(&exp, exp_insn, sizeof(exp));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c: In function ‘guest_main’:
x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1
42 | extern unsigned char vmx_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1
25 | extern unsigned char svm_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
In function ‘assert_hypercall_insn’,
inlined from ‘guest_main’ at x86_64/fix_hypercall_test.c:91:2:
x86_64/fix_hypercall_test.c:64:9: error: array subscript ‘unsigned int[0]’
is partly outside array bounds of ‘unsigned char[1]’ [-Werror=array-bounds]
64 | memcpy(&obs, obs_insn, sizeof(obs));
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c: In function ‘guest_main’:
x86_64/fix_hypercall_test.c:25:22: note: object ‘svm_hypercall_insn’ of size 1
25 | extern unsigned char svm_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
x86_64/fix_hypercall_test.c:42:22: note: object ‘vmx_hypercall_insn’ of size 1
42 | extern unsigned char vmx_hypercall_insn;
| ^~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
make: *** [../lib.mk:135: tools/testing/selftests/kvm/x86_64/fix_hypercall_test] Error 1
Fixes: 6c2fa8b20d0c ("selftests: KVM: Test KVM_X86_QUIRK_FIX_HYPERCALL_INSN")
Cc: Oliver Upton <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Reviewed-by: Oliver Upton <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Implement memcmp(), memcpy(), and memset() to override the compiler's
built-in versions in order to guarantee that the compiler won't generate
out-of-line calls to external functions via the PLT. This allows the
helpers to be safely used in guest code, as KVM selftests don't support
dynamic loading of guest code.
Steal the implementations from the kernel's generic versions, sans the
optimizations in memcmp() for unaligned accesses.
Put the utilities in a separate compilation unit and build with
-ffreestanding to fudge around a gcc "feature" where it will optimize
memset(), memcpy(), etc... by generating a recursive call. I.e. the
compiler optimizes itself into infinite recursion. Alternatively, the
individual functions could be tagged with
optimize("no-tree-loop-distribute-patterns"), but using "optimize" for
anything but debug is discouraged, and Linus NAK'd the use of the flag
in the kernel proper[*].
https://lore.kernel.org/lkml/CAHk-=wik-oXnUpfZ6Hw37uLykc-_P0Apyn2XuX-odh-3Nzop8w@mail.gmail.com
Cc: Andrew Jones <[email protected]>
Cc: Anup Patel <[email protected]>
Cc: Atish Patra <[email protected]>
Cc: Christian Borntraeger <[email protected]>
Cc: Janosch Frank <[email protected]>
Cc: Claudio Imbrenda <[email protected]>
Signed-off-by: Sean Christopherson <[email protected]>
Message-Id: <[email protected]>
Reviewed-by: Andrew Jones <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
The only thing reported by CPUID.9 is the value of
IA32_PLATFORM_DCA_CAP[31:0] in EAX. This MSR doesn't even exist in the
guest, since CPUID.1:ECX.DCA[bit 18] is clear in the guest.
Clear CPUID.9 in KVM_GET_SUPPORTED_CPUID.
Fixes: 24c82e576b78 ("KVM: Sanitize cpuid")
Signed-off-by: Jim Mattson <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Bail out of test_dump_stack() if the stack trace is empty rather than
invoking addr2line with zero addresses. The problem with the latter is
that addr2line will block waiting for addresses to be passed in via
stdin, e.g. if running a selftest from an interactive terminal.
Opportunistically fix up the comment that mentions skipping 3 frames
since only 2 are skipped in the code.
Cc: Vipin Sharma <[email protected]>
Cc: Sean Christopherson <[email protected]>
Signed-off-by: David Matlack <[email protected]>
Message-Id: <[email protected]>
[Small tweak to keep backtrace() call close to if(). - Paolo]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Page_idle uses {ptep/pmdp}_clear_young_notify which in turn calls
the mmu notifier callback ->clear_young(), which purposefully
does not flush the TLB.
When running the test in a nested guest, point 1. of the test
doc header is violated, because KVM TLB is unbounded by size
and since no flush is forced, KVM does not update the sptes
accessed/idle bits resulting in guest assertion failure.
More precisely, only the first ACCESS_WRITE in run_test() actually
makes visible changes, because sptes are created and the accessed
bit is set to 1 (or idle bit is 0). Then the first mark_memory_idle()
passes since access bit is still one, and sets all pages as idle
(or not accessed). When the next write is performed, the update
is not flushed therefore idle is still 1 and next mark_memory_idle()
fails.
Signed-off-by: Emanuele Giuseppe Esposito <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Restrict forced preemption to the active context (Chris)
- Restrict perf_limit_reasons to the supported platforms - gen11+ (Ashutosh)
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-6.0-2022-09-29:
amdgpu:
- GC 11.x fixes
- SMU 13.x fixes
- DCN 3.1.4 fixes
- DCN 3.2.x fixes
- GC 9.x fix
- Fence fix
- SR-IOV supend/resume fix
- PSR regression fix
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull:
* bridge/analogix: Revert earlier suspend fix
* bridge/lt8912b: Fix corrupt display output
Signed-off-by: Dave Airlie <[email protected]>
From: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/YzWvHhaqHhYirn4L@linux-uq9g
|
|
Pull coredump fix from Al Viro:
"Fix for breakage in dump_user_range()"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
[coredump] don't use __kernel_write() on kmap_local_page()
|
|
checkpatch does not point out that VM_BUG_ON() and friends should be
avoided, however, Linus notes:
VM_BUG_ON() has the exact same semantics as BUG_ON. It is literally
no different, the only difference is "we can make the code smaller
because these are less important". [1]
So let's warn on VM_BUG_ON() and other BUG variants as well. While at it,
make it clearer that the kernel really shouldn't be crashed.
As there are some subsystem BUG macros that actually don't end up crashing
the kernel -- for example, KVM_BUG_ON() -- exclude these manually.
[1] https://lore.kernel.org/r/CAHk-=wg40EAZofO16Eviaj7mfqDhZ2gVEbvfsMf6gYzspRjYvw@mail.gmail.com
Signed-off-by: David Hildenbrand <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
Linus notes [1] that the introduction of new code that uses VM_BUG_ON()
is just as bad as BUG_ON(), because it will crash the kernel on
distributions that enable CONFIG_DEBUG_VM (like Fedora):
VM_BUG_ON() has the exact same semantics as BUG_ON. It is literally
no different, the only difference is "we can make the code smaller
because these are less important". [2]
This resulted in a more generic discussion about usage of BUG() and
friends. While there might be corner cases that still deserve a BUG_ON(),
most BUG_ON() cases should simply use WARN_ON_ONCE() and implement a
recovery path if reasonable:
The only possible case where BUG_ON can validly be used is "I have
some fundamental data corruption and cannot possibly return an
error". [2]
As a very good approximation is the general rule:
"absolutely no new BUG_ON() calls _ever_" [2]
... not even if something really shouldn't ever happen and is merely for
documenting that an invariant always has to hold. However, there are sill
exceptions where BUG_ON() may be used:
If you have a "this is major internal corruption, there's no way we can
continue", then BUG_ON() is appropriate. [3]
There is only one good BUG_ON():
Now, that said, there is one very valid sub-form of BUG_ON():
BUILD_BUG_ON() is absolutely 100% fine. [2]
While WARN will also crash the machine with panic_on_warn set, that's
exactly to be expected:
So we have two very different cases: the "virtual machine with good
logging where a dead machine is fine" - use 'panic_on_warn'. And
the actual real hardware with real drivers, running real loads by
users. [4]
The basic idea is that warnings will similarly get reported by users
and be found during testing. However, in contrast to a BUG(), there is a
way to actually influence the expected behavior (e.g., panic_on_warn)
and to eventually keep the machine alive to extract some debug info.
Ingo notes that not all WARN_ON_ONCE cases need recovery. If we don't ever
expect this code to trigger in any case, recovery code is not really
helpful.
I'd prefer to keep all these warnings 'simple' - i.e. no attempted
recovery & control flow, unless we ever expect these to trigger.
[5]
There have been different rules floating around that were never properly
documented. Let's try to clarify.
[1] https://lkml.kernel.org/r/CAHk-=wiEAH+ojSpAgx_Ep=NKPWHU8AdO3V56BXcCsU97oYJ1EA@mail.gmail.com
[2] https://lore.kernel.org/r/CAHk-=wg40EAZofO16Eviaj7mfqDhZ2gVEbvfsMf6gYzspRjYvw@mail.gmail.com
[3] https://lkml.kernel.org/r/CAHk-=wit-DmhMfQErY29JSPjFgebx_Ld+pnerc4J2Ag990WwAA@mail.gmail.com
[4] https://lore.kernel.org/r/CAHk-=wgF7K2gSSpy=m_=K3Nov4zaceUX9puQf1TjkTJLA2XC_g@mail.gmail.com
[5] https://lore.kernel.org/r/YwIW+mVeZoTOxn%[email protected]
Reviewed-by: John Hubbard <[email protected]>
Signed-off-by: David Hildenbrand <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
Add missing devm_request_free_mem_region() to devres.rst.
It's introduced by commit 0092908d16c6 ("mm: factor out a
devm_request_free_mem_region helper").
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
devm_irq_sim_init() has been changed to devm_irq_domain_create_sim()
in commit 337cbeb2c13e ("genirq/irq_sim: Simplify the API").
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
Since commit b3ac04132c4b ("mm/rmap: Turn page_referenced() into
folio_referenced()") the page_referenced function name was modified,
so fix it up to use the correct one.
Signed-off-by: Vernon Yang <[email protected]>
Reviewed-by: Mike Rapoport <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
The Code of Conduct interpretation does not reflect the current
practices of the CoC committee or the TAB. Update the documentation
to remove references to initial committees and boot strap periods
since it is past that time, and note that the this document
does serve as the documentation for the CoC committee processes.
Signed-off-by: Kristen Carlson Accardi <[email protected]>
Reviewed-by: Shuah Khan <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
Now that building html docs with math expressions does not need texlive
packages, remove the note on the requirement in the "Sphinx Install"
section.
Instead, add sections of "Math Expressions in HTML" and "Choice of Math
Renderer".
Describe the effect of setting SPHINX_IMGMATH in the latter section.
Signed-off-by: Akira Yokosawa <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
Bring the description on when to use the Reported-by: tag found in
Documentation/process/5.Posting.rst more in line with the description in
Documentation/process/submitting-patches.rst: before this change the two
were contradicting each other, as the latter is way more permissive and
only states '[...] if the bug was reported in private, then ask for
permission first before using the Reported-by tag.'
Signed-off-by: Thorsten Leemhuis <[email protected]>
Link: https://lore.kernel.org/r/2fc7162dfb76e04da5ea903c9c170d913e735dad.1664372256.git.linux@leemhuis.info
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
After commit 22471e1313f2 ("kconfig: use a menu in arch/Kconfig to reduce
clutter"), the location of Kprobes is under "General architecture-dependent
options" rather than "General setup".
Signed-off-by: Tiezhu Yang <[email protected]>
Acked-by: Steven Rostedt (Google) <[email protected]>
Fixes: 22471e1313f2 ("kconfig: use a menu in arch/Kconfig to reduce clutter")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
Enable sram on vcn_4_0_2
Signed-off-by: Sonny Jiang <[email protected]>
Reviewed-by: James Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
Enable VCN DPG on GC11_0_1
Signed-off-by: Sonny Jiang <[email protected]>
Reviewed-by: James Zhu <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
scripting engine
A brown paper bag where -Wno-error=deprecated-declarations was added
from compiler output when the right thing is to add
-Wno-deprecated-declarations, fix it.
Fixes: 4ee3c4da8b1b9c22 ("perf scripting python: Do not build fail on deprecation warnings")
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The top-level index.rst file is the entry point for the kernel's
documentation, especially for readers of the HTML output. It is currently
a mess containing everything we thought to throw in there. Firefox says it
would require 26 pages of paper to print it. That is not a user-friendly
introduction.
This series aims to improve our documentation entry point with a focus on
rewriting index.rst. The result is, IMO, simpler and more approachable.
For anybody who wants to see the rendered results without building the
docs, have a look at:
https://static.lwn.net/kerneldoc/
This time around I've rendered the pages using the "Read The Docs" theme,
since that's what everybody will get by default. That theme ignores the
directives regarding the left column, so the results are not as good there.
I have a series proposing a default-theme change in the works, but that's a
separate topic.
This is only a beginning; I think this kind of organizational effort has to
be pushed down into the lower layers of the docs tree itself. But one has
to start somewhere.
|
|
Readers looking for user-oriented information may benefit from it.
Signed-off-by: Jonathan Corbet <[email protected]>
Reviewed-by: David Vernet <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
These files describe part of the core API, but have never been converted to
RST due to ... let's say local oppposition. So, create a set of
special-purpose wrappers to ..include these files into a separate page so
that they can be a part of the htmldocs build. Then link them into the
core-api manual and remove them from the "staging" dumping ground.
Acked-by: Jani Nikula <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Reviewed-by: David Vernet <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
This one file should not really be in the top-level documentation
directory. core-api/ may not be a perfect fit but seems to be best, so
move it there. Adjust a couple of internal document references to make
them location-independent, and point checkpatch.pl at the new location.
Cc: Jiri Slaby <[email protected]>
Cc: Joe Perches <[email protected]>
Reviewed-by: David Vernet <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
There is some useless boilerplate text that was added by sphinx when this
file was first created; take it out.
Reviewed-by: David Vernet <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
Use the html_sidebars directive to get a more useful set of links in the
left column.
Unfortunately, this is a no-op with the default RTD theme, but others
observe it.
Reviewed-by: David Vernet <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
The front page is the entry point to the documentation, especially for
people who read it online. It's a big mess of everything we could think to
toss into it. Rewrite the page with an eye toward simplicity and making it
easy for readers to get going toward what they really want to find.
This is only a beginning, but it makes our docs more approachable than
before.
Acked-by: Jani Nikula <[email protected]>
Reviewed-by: David Vernet <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
...otherwise Sphinx won't cooperate when trying to list it explicitly in
the top-level index.rst file
Reviewed-by: David Vernet <[email protected]>
Acked-by: Jani Nikula <[email protected]>
Signed-off-by: Jonathan Corbet <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jonathan Corbet <[email protected]>
|
|
A clang 15 build reveal several unused-but-set variables, removing the
'foo' variable in tests/mmap-basic.o object to address one of those
cases.
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
bison produced code
clang 15 now warns:
46 65.20 fedora:rawhide : FAIL clang version 15.0.0 (Fedora 15.0.0-3.fc38)
util/parse-events-bison.c:1401:9: error: variable 'parse_events_nerrs' set but not used [-Werror,-Wunused-but-set-variable]
int yynerrs = 0;
^
#define yynerrs parse_events_nerrs
^
1 error generated.
make[3]: *** [/git/perf-6.0.0-rc7/tools/build/Makefile.build:139: util] Error 2
Just ignore one more compiler warning for the bison generated C code.
Committer notes:
Older clangs don't know about -Wunused-but-set-variable, so we need to
add -Wno-unknown-warning-option to avoid this:
37 44.92 fedora:32 : FAIL clang version 10.0.1 (Fedora 10.0.1-3.fc32)
error: unknown warning option '-Wno-unused-but-set-variable'; did you mean '-Wno-unused-const-variable'? [-Werror,-Wunknown-warning-option]
make[3]: *** [/git/perf-6.0.0-rc7/tools/build/Makefile.build:139: util] Error 2
Reported-by: Arnaldo Carvalho de Melo <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Tested-by: Arnaldo Carvalho de Melo <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wifi and can.
Current release - regressions:
- phy: don't WARN for PHY_UP state in mdio_bus_phy_resume()
- wifi: fix locking in mac80211 mlme
- eth:
- revert "net: mvpp2: debugfs: fix memory leak when using debugfs_lookup()"
- mlxbf_gige: fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe
Previous releases - regressions:
- wifi: fix regression with non-QoS drivers
Previous releases - always broken:
- mptcp: fix unreleased socket in accept queue
- wifi:
- don't start TX with fq->lock to fix deadlock
- fix memory corruption in minstrel_ht_update_rates()
- eth:
- macb: fix ZynqMP SGMII non-wakeup source resume failure
- mt7531: only do PLL once after the reset
- usbnet: fix memory leak in usbnet_disconnect()
Misc:
- usb: qmi_wwan: add new usb-id for Dell branded EM7455"
* tag 'net-6.0-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (30 commits)
mptcp: fix unreleased socket in accept queue
mptcp: factor out __mptcp_close() without socket lock
net: ethernet: mtk_eth_soc: fix mask of RX_DMA_GET_SPORT{,_V2}
net: mscc: ocelot: fix tagged VLAN refusal while under a VLAN-unaware bridge
can: c_can: don't cache TX messages for C_CAN cores
ice: xsk: drop power of 2 ring size restriction for AF_XDP
ice: xsk: change batched Tx descriptor cleaning
net: usb: qmi_wwan: Add new usb-id for Dell branded EM7455
selftests: Fix the if conditions of in test_extra_filter()
net: phy: Don't WARN for PHY_UP state in mdio_bus_phy_resume()
net: stmmac: power up/down serdes in stmmac_open/release
wifi: mac80211: mlme: Fix double unlock on assoc success handling
wifi: mac80211: mlme: Fix missing unlock on beacon RX
wifi: mac80211: fix memory corruption in minstrel_ht_update_rates()
wifi: mac80211: fix regression with non-QoS drivers
wifi: mac80211: ensure vif queues are operational after start
wifi: mac80211: don't start TX with fq->lock to fix deadlock
wifi: cfg80211: fix MCS divisor value
net: hippi: Add missing pci_disable_device() in rr_init_one()
net/mlxbf_gige: Fix an IS_ERR() vs NULL bug in mlxbf_gige_mdio_probe
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- small fixes for iqs62x-keys and melfas_mip4 drivers
- corrected register address in snvs_pwrkey driver
- Synaptic driver will stop trying to use intertouch (native) mode on
some Lenovo AMD devices
* tag 'input-for-v6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: snvs_pwrkey - fix SNVS_HPVIDR1 register address
Input: synaptics - disable Intertouch for Lenovo T14 and P14s AMD G1
Input: iqs62x-keys - drop unused device node references
Input: melfas_mip4 - fix return value check in mip4_probe()
|
|
Pull NVMe fixes from Christoph:
"nvme fixes for Linux 6.1
- fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
(Michael Kelley)
- disable Write Zeroes on Phison E3C/E4C (Tina Hsu)"
* tag 'nvme-6.0-2022-09-29' of git://git.infradead.org/nvme:
nvme-pci: disable Write Zeroes on Phison E3C/E4C
nvme: Fix IOC_PR_CLEAR and IOC_PR_RELEASE ioctls for nvme devices
|
|
[Why]
Enabling Z10 optimizations allows DMUB to disable the OTG during PSR
link-off. This theoretically saves power by putting more of the display
hardware to sleep. However, we observe that with PSR SU, it causes
visual artifacts, higher power usage, and potential system hang.
This is partly due to an odd behavior with the VStartup interrupt used
to signal DRM vblank events. If the OTG is toggled on/off during a PSR
link on/off cycle, the vstartup interrupt fires twice in quick
succession. This generates incorrectly timed vblank events.
Additionally, it can cause cursor updates to generate visual artifacts.
Note that this is not observed with PSR1 since PSR is fully disabled
when there are vblank event requestors. Cursor updates are also
artifact-free, likely because there are no selectively-updated (SU)
frames that can generate artifacts.
[How]
A potential solution is to disable z10 idle optimizations only when fast
updates (flips & cursor updates) are committed. A mechanism to do so
would require some thoughtful design. Let's just disable idle
optimizations for PSR2 for now.
Fixes: 7cc191ee7621 ("drm/amd/display: Implement MPO PSR SU")
Reported-by: August Wikerfors <[email protected]>
Link: https://lore.kernel.org/r/[email protected]/
Tested-by: August Wikerfors <[email protected]>
Reviewed-by: Harry Wentland <[email protected]>
Signed-off-by: Leo Li <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
We were just checking for the 'err' variable, when we should really see
if there was some of the many checked errors that don't stop the test
right away.
Detected with clang 15.0.0:
44 75.23 fedora:37 : FAIL clang version 15.0.0 (Fedora 15.0.0-2.fc37)
tests/perf-record.c:68:16: error: variable 'errs' set but not used [-Werror,-Wunused-but-set-variable]
int err = -1, errs = 0, i, wakeups = 0;
^
1 error generated.
The patch introducing this 'perf test' entry had that check:
+ return (err < 0 || errs > 0) ? -1 : 0;
But at some point we lost that:
- return (err < 0 || errs > 0) ? -1 : 0;
+ if (err == -EACCES)
+ return TEST_SKIP;
+ if (err < 0)
+ return TEST_FAIL;
+ return TEST_OK
Put it back.
Fixes: 2cf88f4614c996e5 ("perf test: Use skip in PERF_RECORD_*")
Acked-by: Ian Rogers <[email protected]>
Cc: Adrian Hunter <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The test case 87 ("perf record tests") failed on hybrid systems,the event
"cpu/br_inst_retired.near_call/p" is only for non-hybrid system. Correct
the test event to support both non-hybrid and hybrid systems.
Before:
# ./perf test 87
87: perf record tests : FAILED!
After:
# ./perf test 87
87: perf record tests : Ok
Fixes: 24f378e66021f559 ("perf test: Add basic perf record tests")
Reviewed-by: Kan Liang <[email protected]>
Signed-off-by: Xing Zhengjun <[email protected]>
Acked-by: Ian Rogers <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ATA fixes from Damien Le Moal:
"Three late patches to fix problems discovered recently:
- Add a horkage to disable link power management by default for the
Pioneer BDR-207M and BDR-205 DVD drives (from Niklas)
- Two patches to fix setting the maximum queue depth of libsas owned
ATA devices (from me)"
* tag 'ata-6.0-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
ata: libata-sata: Fix device queue depth control
ata: libata-scsi: Fix initialization of device queue depth
libata: add ATA_HORKAGE_NOLPM for Pioneer BDR-207M and BDR-205
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch fixes from Huacai Chen:
"Some trivial fixes and cleanup"
* tag 'loongarch-fixes-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: Clean up loongson3_smp_ops declaration
LoongArch: Fix and cleanup csr_era handling in do_ri()
LoongArch: Align the address of kernel_entry to 4KB
|
|
Since loongson3_smp_ops is not used in LoongArch anymore, let's remove
it for cleanup.
Fixes: f2ac457a6138 ("LoongArch: Add CPU definition headers")
Signed-off-by: Yanteng Si <[email protected]>
Signed-off-by: Huacai Chen <[email protected]>
|