aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-12-10ARM: dts: imx6sll-evk: add debug LED supportAnson Huang1-0/+18
On i.MX6SLL EVK board, there is a debug LED controlled by MX6SLL_PAD_EPDC_VCOM1__GPIO2_IO04 pin, add support for it. Signed-off-by: Anson Huang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx6qdl-sabreauto: Enable pcieLeonard Crestez1-0/+4
The imx6qdl-sabreauto boards have a pcie slot so let's enable it. Tested on imx6dl-sabreauto with an atk9k wifi card; scanning works. There are unhandled differences for imx6qp but imx6qp-sabreauto.dts already contains a snippet explicitly disabling the &pcie node so that can be dealt with later. Signed-off-by: Leonard Crestez <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx6sl: Fix memory node duplicationFabio Estevam4-2/+3
Boards based on imx6sl have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx6sl.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx6sx: Fix memory node duplicationFabio Estevam8-2/+7
Boards based on imx6sx have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx6sx.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx6ul: Fix memory node duplicationFabio Estevam10-2/+9
Boards based on imx6ul have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx6ul.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx6ul-ccimx6ulsom: Add memory node to board dtsFabio Estevam1-0/+5
Add memory node to board dts. This is done in preparation of removing the memory node from imx6ul.dtsi. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx7d-sdb: add rev-a board supportAnson Huang3-2/+67
Current imx7d-sdb.dts has some incorrect settings about Rev-A and Rev-B boards, some of the settings are based on Rev-A board but some are based on Rev-B board, clean up it by adding i.MX7D SDB Rev-A board support, make default imx7d-sdb.dts for Rev-B board as usual, and introduce imx7d-sdb-reva.dts for Rev-A board. Below are the affected differences of Rev-A and Rev-B board: Rev-A Rev-B USB_OTG2_PWR: UART3_CTS_B GPIO1_IO07 ENET_EN_B: None GPIO1_IO04 TP_INT_B: EPDC_DATA13 EPDC_BDR1 Signed-off-by: Anson Huang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: ls1021a: Add all CPUs in cooling mapsViresh Kumar1-0/+2
Each CPU can (and does) participate in cooling down the system but the DT only captures a handful of them, normally CPU0, in the cooling maps. Things work by chance currently as under normal circumstances its the first CPU of each cluster which is used by the operating systems to probe the cooling devices. But as soon as this CPU ordering changes and any other CPU is used to bring up the cooling device, we will start seeing failures. Also the DT is rather incomplete when we list only one CPU in the cooling maps, as the hardware doesn't have any such limitations. Update cooling maps to include all devices affected by individual trip points. Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: Add support for emtrion emCON-MX6 seriesJan Tuerk5-0/+1039
This patch adds support for the emtrion GmbH emCON-MX6 modules. They are available with imx.6 Solo, Dual-Lite, Dual and Quad equipped with Memory from 512MB to 2GB (configured by U-Boot). Our default developer-Kit ships with the Avari baseboard and the EDT ETM0700G0BDH6 Display (imx6[q|dl]-emcon-avari). The devicetree is split into the common part providing all module components and the basic support for all SoC versions (imx6qdl-emcon.dtsi) and parts which are i.mx6 S|DL and D|Q relevant. Finally the support for the avari baseboard in the developer-kit configuration is provided by the emcon-avari dts files. Signed-off-by: Jan Tuerk <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10dt-bindings: arm: Document emtrion emCON-MX6 bindingsJan Tuerk1-0/+12
Document the compatible strings for emtrion emCON-MX6 SoM's. Signed-off-by: Jan Tuerk <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx: Add an cpu0 label for imx6dl devicesJan Tuerk1-1/+1
Adding the label cpu0 allows the adjustment of cpu-parameters by reference in overlaying dtsi files in the same way as it is possible for imx6q devices. Signed-off-by: Jan Tuerk <[email protected]> Reviewed-by: Andreas Färber <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx: Add dummy PHYs for HSIC-only USB controllersFrieder Schrempf3-0/+27
Some SOCs in the i.MX6 family have a USB host controller that is only capable of the HSIC interface and has no on-board PHY. To be able to use these controllers, we need to add "usb-nop-xceiv" dummy PHYs. Signed-off-by: Frieder Schrempf <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx6sx: specify proper clock for nodes with dummy clockAnson Huang1-4/+4
From i.MX6SX reference manual CCM chapter, KPP and WDOGn use IPG clock as their clock, specify IPG clock for KPP and WDOGn instead of DUMMY clock. Signed-off-by: Anson Huang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: ls1021a: removed compatible string "snps,dw-pcie"Hou Zhiqiang1-2/+2
Removed the wrong compatible string "snps,dw-pcie", in case match incorrect driver. Signed-off-by: Hou Zhiqiang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10dt-bindings: pci: layerscape-pci: removed compatible string "snps,dw-pcie"Hou Zhiqiang1-3/+3
Removed the compatible string "snps,dw-pcie", it is for the reference platform driver for PCI RC IP Protoyping Kits based on the ARC SDP, so it is not suitable for all platform with designware PCIe controller, and platform vendors have themselves' drivers. The compatible string "snsp,dw-pcie" was added by mistake and it's not matched that time, but it is matched because PCIe drivers has been collected recently. Signed-off-by: Hou Zhiqiang <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10dt-bindings: pci: layerscape-pci: add compatible strings "fsl,ls1043a-pcie"Hou Zhiqiang1-0/+1
The PCIe compatible string for LS1043A was lost, so add it. Signed-off-by: Hou Zhiqiang <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx7: Fix memory node duplicationFabio Estevam9-3/+9
Boards based on imx7 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx7s.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx35: Fix memory node duplicationFabio Estevam3-2/+2
Boards based on imx35 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx35.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx31: Fix memory node duplicationFabio Estevam3-2/+2
Boards based on imx31 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx31.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Vladimir Zapolskiy <[email protected]> Tested-by: Vladimir Zapolskiy <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx6sx: Complete the PXP supportFabio Estevam1-3/+3
According to Documentation/devicetree/bindings/media/fsl-pxp.txt, only one PXP clock needs to be described and it should be named "axi". Also pass the compatible string as suggested in the bindings doc. Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx6sl: vddpu is NOT an always-on regulatorAnson Huang1-1/+0
Remove "regulator-always-on" property for vddpu regulator since it can be OFF when GPU power domain is OFF. Signed-off-by: Anson Huang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx6sll: remove unused property in gpc nodeAnson Huang1-1/+0
The "fsl,mf-mix-wakeup-irq" is ONLY used as a temporary solution in NXP's internal tree for Mega/Fast Mix off feature after suspend, upstream kernel does NOT need it, remove it. Signed-off-by: Anson Huang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx53: Fix memory node duplicationFabio Estevam9-2/+8
Boards based on imx53 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx53.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-12-10ARM: dts: imx51: Fix memory node duplicationFabio Estevam9-2/+8
Boards based on imx51 have duplicate memory nodes: - One coming from the board dts file: memory@ - One coming from the imx51.dtsi file. Fix the duplication by removing the memory node from the dtsi file and by adding 'device_type = "memory";' in the board dts. Reported-by: Rob Herring <[email protected]> Signed-off-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-16ARM: dts: imx6: add thermal sensor and cooling cellsLucas Stach2-0/+4
This allows a board to specify a custom thermal zone configuration involving the SoC internal sensor, CPU and GPU nodes without having to change those nodes. Signed-off-by: Lucas Stach <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-16ARM: dts: imx6: RDU2: fix eGalax touchscreen nodeLucas Stach1-2/+3
Use the correct compatible for the new protocol used by the firmware on the touch controller, the GPIO wakeup isn't used in that case. Also eGalax touch needs axis swapping, just as with the RMI4 touch. Signed-off-by: Lucas Stach <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-16ARM: dts: imx6ul: ccimx6ulsom: Fix indentation on iomuxc nodesAlex Gonzalez1-4/+4
This patch corrects indentation problems in the gpmigrp and i2c1grp nodes. Signed-off-by: Alex Gonzalez <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-16ARM: dts: imx6ul: ccimx6ulsom: Add support for wireless SOM variantAlex Gonzalez1-0/+64
The wireless variants of the ConnecCore 6UL SOM include a Qualcomm QCA6564 wireless chip with dual WiFi and Bluetooth. Both the ConnectCore 6UL SBC Express and Pro boards fit a wireless SOM. The Wifi is connected through the SDIO interface on usdhc1 and the Bluetooth is connected via uart1. Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Alex Gonzalez <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-16ARM: dts: ls1021a: Add the status property disable PCIeXiaowei Bao1-0/+2
Add the status property disable the PCIe, the property will be enable by bootloader. Signed-off-by: Xiaowei Bao <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-16ARM: dts: imx6q-bx50v3: user-space watchdog GPIO configurationIan Ray4-28/+16
Leave b{4,6}50v3 GPIO expander pca953x pins P05,P10,P11 unconfigured as they are now used to implement an additional watchdog mechanism in user space. P10,P11 pins remain unused (and therefore hogged) on b850v3. Signed-off-by: Ian Ray <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-14ARM: dts: i.MX25: add the clocks for the EPIT blocksMartin Kaiser1-0/+4
The i.MX25 contains two EPIT (Enhanced Periodic Interrupt Timer) function blocks. Add their ipg and per clocks to the device tree. Signed-off-by: Martin Kaiser <[email protected]> Acked-by: Clément Péron <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-05ARM: dts: imx6: add mmdc ipg clockAnson Huang5-0/+5
i.MX6 SoCs has MMDC clock gates in CCM CCGR, add clock property for MMDC driver's clock operation. Signed-off-by: Anson Huang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-05ARM: dts: imx6qdl-sabreauto: Remove reg property from fixed regulatorJoakim Zhang1-31/+22
Drop reg property from fixed regulator and remove the unncessary bus node. Signed-off-by: Joakim Zhang <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-05ARM: dts: imx6qdl-icore: Add missing stdout-path propertyShyam Saini1-0/+4
This would help us to get early boot logs by passing "earlycon" to kernel bootargs. Further, by adding this we don't have to depend on complex earlyprintk configs for early boot logs. Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Shyam Saini <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-05ARM: dts: imx6ull: Add dcp nodeLeonard Crestez1-0/+10
The DCP block on 6ull has no major differences other than requiring explicit clock enabling. Signed-off-by: Leonard Crestez <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-05ARM: dts: Add support for Liebherr's BK4 device (vf610 based)Lukasz Majewski2-0/+502
This commit adds DTS support for BK4 device from Liebherr. It uses vf610 SoC from NXP. Signed-off-by: Lukasz Majewski <[email protected]> Reviewed-by: Stefan Agner <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-05ARM: dts: imx6qdl-udoo: Add Pincfgs for UART4Markus Kueffner1-0/+13
Add Pincfgs for UART4 to enable Communication with the onboard SAM3X Signed-off-by: Markus Kueffner <[email protected]> Reviewed-by: Fabio Estevam <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-05ARM: dts: vf610: Add ZII SCU4 AIB boardFabio Estevam2-0/+838
Add support for the ZII SCU 4 board, which has lots of switches and SFF ports. Based on the work from Andrew Lunn. Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Chris Healy <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2018-11-04Linux 4.20-rc1Linus Torvalds1-2/+2
2018-11-04Merge tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifsLinus Torvalds25-292/+2418
Pull UBIFS updates from Richard Weinberger: - Full filesystem authentication feature, UBIFS is now able to have the whole filesystem structure authenticated plus user data encrypted and authenticated. - Minor cleanups * tag 'tags/upstream-4.20-rc1' of git://git.infradead.org/linux-ubifs: (26 commits) ubifs: Remove unneeded semicolon Documentation: ubifs: Add authentication whitepaper ubifs: Enable authentication support ubifs: Do not update inode size in-place in authenticated mode ubifs: Add hashes and HMACs to default filesystem ubifs: authentication: Authenticate super block node ubifs: Create hash for default LPT ubfis: authentication: Authenticate master node ubifs: authentication: Authenticate LPT ubifs: Authenticate replayed journal ubifs: Add auth nodes to garbage collector journal head ubifs: Add authentication nodes to journal ubifs: authentication: Add hashes to index nodes ubifs: Add hashes to the tree node cache ubifs: Create functions to embed a HMAC in a node ubifs: Add helper functions for authentication support ubifs: Add separate functions to init/crc a node ubifs: Format changes for authentication support ubifs: Store read superblock node ubifs: Drop write_node ...
2018-11-04Merge tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds5-40/+17
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Bugfix: - Fix build issues on architectures that don't provide 64-bit cmpxchg Cleanups: - Fix a spelling mistake" * tag 'nfs-for-4.20-2' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: fix spelling mistake, EACCESS -> EACCES SUNRPC: Use atomic(64)_t for seq_send(64)
2018-11-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds7-0/+432
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull more timer updates from Thomas Gleixner: "A set of commits for the new C-SKY architecture timers" * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: timer: gx6605s SOC timer clocksource/drivers/c-sky: Add gx6605s SOC system timer dt-bindings: timer: C-SKY Multi-processor timer clocksource/drivers/c-sky: Add C-SKY SMP timer
2018-11-04Merge tag 'ntb-4.20' of git://github.com/jonmason/ntbLinus Torvalds6-110/+429
Pull NTB updates from Jon Mason: "Fairly minor changes and bug fixes: NTB IDT thermal changes and hook into hwmon, ntb_netdev clean-up of private struct, and a few bug fixes" * tag 'ntb-4.20' of git://github.com/jonmason/ntb: ntb: idt: Alter the driver info comments ntb: idt: Discard temperature sensor IRQ handler ntb: idt: Add basic hwmon sysfs interface ntb: idt: Alter temperature read method ntb_netdev: Simplify remove with client device drvdata NTB: transport: Try harder to alloc an aligned MW buffer ntb: ntb_transport: Mark expected switch fall-throughs ntb: idt: Set PCIe bus address to BARLIMITx NTB: ntb_hw_idt: replace IS_ERR_OR_NULL with regular NULL checks ntb: intel: fix return value for ndev_vec_mask() ntb_netdev: fix sleep time mismatch
2018-11-03Merge branch 'sched-urgent-for-linus' of ↵Linus Torvalds2-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull scheduler fixes from Ingo Molnar: "A memory (under-)allocation fix and a comment fix" * 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/topology: Fix off by one bug sched/rt: Update comment in pick_next_task_rt()
2018-11-03Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds47-171/+198
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "A number of fixes and some late updates: - make in_compat_syscall() behavior on x86-32 similar to other platforms, this touches a number of generic files but is not intended to impact non-x86 platforms. - objtool fixes - PAT preemption fix - paravirt fixes/cleanups - cpufeatures updates for new instructions - earlyprintk quirk - make microcode version in sysfs world-readable (it is already world-readable in procfs) - minor cleanups and fixes" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: compat: Cleanup in_compat_syscall() callers x86/compat: Adjust in_compat_syscall() to generic code under !COMPAT objtool: Support GCC 9 cold subfunction naming scheme x86/numa_emulation: Fix uniform-split numa emulation x86/paravirt: Remove unused _paravirt_ident_32 x86/mm/pat: Disable preemption around __flush_tlb_all() x86/paravirt: Remove GPL from pv_ops export x86/traps: Use format string with panic() call x86: Clean up 'sizeof x' => 'sizeof(x)' x86/cpufeatures: Enumerate MOVDIR64B instruction x86/cpufeatures: Enumerate MOVDIRI instruction x86/earlyprintk: Add a force option for pciserial device objtool: Support per-function rodata sections x86/microcode: Make revision and processor flags world-readable
2018-11-03Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds102-539/+3616
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf updates and fixes from Ingo Molnar: "These are almost all tooling updates: 'perf top', 'perf trace' and 'perf script' fixes and updates, an UAPI header sync with the merge window versions, license marker updates, much improved Sparc support from David Miller, and a number of fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (66 commits) perf intel-pt/bts: Calculate cpumode for synthesized samples perf intel-pt: Insert callchain context into synthesized callchains perf tools: Don't clone maps from parent when synthesizing forks perf top: Start display thread earlier tools headers uapi: Update linux/if_link.h header copy tools headers uapi: Update linux/netlink.h header copy tools headers: Sync the various kvm.h header copies tools include uapi: Update linux/mmap.h copy perf trace beauty: Use the mmap flags table generated from headers perf beauty: Wire up the mmap flags table generator to the Makefile perf beauty: Add a generator for MAP_ mmap's flag constants tools include uapi: Update asound.h copy tools arch uapi: Update asm-generic/unistd.h and arm64 unistd.h copies tools include uapi: Update linux/fs.h copy perf callchain: Honour the ordering of PERF_CONTEXT_{USER,KERNEL,etc} perf cs-etm: Correct CPU mode for samples perf unwind: Take pgoff into account when reporting elf to libdwfl perf top: Do not use overwrite mode by default perf top: Allow disabling the overwrite mode perf trace: Beautify mount's first pathname arg ...
2018-11-03Merge branch 'irq-urgent-for-linus' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull irq fixes from Ingo Molnar: "An irqchip driver fix and a memory (over-)allocation fix" * 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: irqchip/irq-mvebu-sei: Fix a NULL vs IS_ERR() bug in probe function irq/matrix: Fix memory overallocation
2018-11-04sched/topology: Fix off by one bugPeter Zijlstra1-1/+1
With the addition of the NUMA identity level, we increased @level by one and will run off the end of the array in the distance sort loop. Fixed: 051f3ca02e46 ("sched/topology: Introduce NUMA identity node sched domain") Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-11-03Merge branch 'core/urgent' into x86/urgent, to pick up objtool fixIngo Molnar4068-73501/+261778
Signed-off-by: Ingo Molnar <[email protected]>
2018-11-03Merge tag 'armsoc-fixes' of ↵Linus Torvalds8-22/+35
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes who have come in near or during the merge window: - Removal of a VLA usage in Marvell mpp platform code - Enable some IPMI options for ARM64 servers by default, helps testing - Enable PREEMPT on 32-bit ARMv7 defconfig - Minor fix for stm32 DT (removal of an unused DMA property) - Bugfix for TI OMAP1-based ams-delta (-EINVAL -> IRQ_NOTCONNECTED)" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: dts: stm32: update HASH1 dmas property on stm32mp157c ARM: orion: avoid VLA in orion_mpp_conf ARM: defconfig: Update multi_v7 to use PREEMPT arm64: defconfig: Enable some IPMI configs soc: ti: QMSS: Fix usage of irq_set_affinity_hint ARM: OMAP1: ams-delta: Fix impossible .irq < 0
Powered by cgit, Gruvboxed by Blaster4385.