aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-02-04MAINTAINERS: netfilter: update git linksFlorian Westphal1-2/+2
nf and nf-next have a new location. Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-02-04netfilter: conntrack: re-init state for retransmitted syn-ackFlorian Westphal1-0/+12
TCP conntrack assumes that a syn-ack retransmit is identical to the previous syn-ack. This isn't correct and causes stuck 3whs in some more esoteric scenarios. tcpdump to illustrate the problem: client > server: Flags [S] seq 1365731894, win 29200, [mss 1460,sackOK,TS val 2083035583 ecr 0,wscale 7] server > client: Flags [S.] seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215367629 ecr 2082921663] Note the invalid/outdated synack ack number. Conntrack marks this syn-ack as out-of-window/invalid, but it did initialize the reply direction parameters based on this packets content. client > server: Flags [S] seq 1365731894, win 29200, [mss 1460,sackOK,TS val 2083036623 ecr 0,wscale 7] ... retransmit... server > client: Flags [S.], seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215368644 ecr 2082921663] and another bogus synack. This repeats, then client re-uses for a new attempt: client > server: Flags [S], seq 2375731741, win 29200, [mss 1460,sackOK,TS val 2083100223 ecr 0,wscale 7] server > client: Flags [S.], seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215430754 ecr 2082921663] ... but still gets a invalid syn-ack. This repeats until: server > client: Flags [S.], seq 145824453, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215437785 ecr 2082921663] server > client: Flags [R.], seq 145824454, ack 643160523, win 65535, [mss 8952,wscale 5,TS val 3215443451 ecr 2082921663] client > server: Flags [S], seq 2375731741, win 29200, [mss 1460,sackOK,TS val 2083115583 ecr 0,wscale 7] server > client: Flags [S.], seq 162602410, ack 2375731742, win 65535, [mss 8952,wscale 5,TS val 3215445754 ecr 2083115583] This syn-ack has the correct ack number, but conntrack flags it as invalid: The internal state was created from the first syn-ack seen so the sequence number of the syn-ack is treated as being outside of the announced window. Don't assume that retransmitted syn-ack is identical to previous one. Treat it like the first syn-ack and reinit state. Signed-off-by: Florian Westphal <[email protected]> Acked-by: Jozsef Kadlecsik <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-02-04netfilter: conntrack: move synack init code to helperFlorian Westphal1-18/+29
It seems more readable to use a common helper in the followup fix rather than copypaste or goto. No functional change intended. The function is only called for syn-ack or syn in repy direction in case of simultaneous open. Signed-off-by: Florian Westphal <[email protected]> Acked-by: Jozsef Kadlecsik <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-02-04netfilter: nft_payload: don't allow th access for fragmentsFlorian Westphal2-5/+6
Loads relative to ->thoff naturally expect that this points to the transport header, but this is only true if pkt->fragoff == 0. This has little effect for rulesets with connection tracking/nat because these enable ip defra. For other rulesets this prevents false matches. Fixes: 96518518cc41 ("netfilter: add nftables") Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-02-04netfilter: conntrack: don't refresh sctp entries in closed stateFlorian Westphal1-0/+9
Vivek Thrivikraman reported: An SCTP server application which is accessed continuously by client application. When the session disconnects the client retries to establish a connection. After restart of SCTP server application the session is not established because of stale conntrack entry with connection state CLOSED as below. (removing this entry manually established new connection): sctp 9 CLOSED src=10.141.189.233 [..] [ASSURED] Just skip timeout update of closed entries, we don't want them to stay around forever. Reported-and-tested-by: Vivek Thrivikraman <[email protected]> Closes: https://bugzilla.netfilter.org/show_bug.cgi?id=1579 Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-02-04erofs: fix small compressed files inliningGao Xiang1-0/+7
Prior to ztailpacking feature, it's enough that each lcluster has two pclusters at most, and the last pcluster should be turned into an uncompressed pcluster when necessary. For example, _________________________________________________ |_ pcluster n-2 _|_ pcluster n-1 _|____ EOFed ____| which should be converted into: _________________________________________________ |_ pcluster n-2 _|_ pcluster n-1 (uncompressed)' _| That is fine since either pcluster n-1 or (uncompressed)' takes one physical block. However, after ztailpacking was supported, the game is changed since the last pcluster can be inlined now. And such case above is quite common for inlining small files. Therefore, in order to inline more effectively, special EOF lclusters are now supported which can have three parts at most, as illustrated below: _________________________________________________ |_ pcluster n-2 _|_ pcluster n-1 _|____ EOFed ____| ^ i_size Actually similar code exists in Yue Hu's original patchset [1], but I removed this part on purpose. After evaluating more real cases with small files, I've changed my mind. [1] https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Fixes: ab92184ff8f1 ("erofs: add on-disk compressed tail-packing inline support") Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Gao Xiang <[email protected]>
2022-02-03block: bio-integrity: Advance seed correctly for larger interval sizesMartin K. Petersen1-1/+1
Commit 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed") added code to update the integrity seed value when advancing a bio. However, it failed to take into account that the integrity interval might be larger than the 512-byte block layer sector size. This broke bio splitting on PI devices with 4KB logical blocks. The seed value should be advanced by bio_integrity_intervals() and not the number of sectors. Cc: Dmitry Monakhov <[email protected]> Cc: [email protected] Fixes: 309a62fa3a9e ("bio-integrity: bio_integrity_advance must update integrity seed") Tested-by: Dmitry Ivanov <[email protected]> Reported-by: Alexey Lyashkov <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jens Axboe <[email protected]>
2022-02-04Merge tag 'amd-drm-fixes-5.17-2022-02-02' of ↵Dave Airlie15-62/+94
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-5.17-2022-02-02: amdgpu: - mGPU fan boost fix for beige goby - S0ix fixes - Cyan skillfish hang fix - DCN fixes for DCN 3.1 - DCN fixes for DCN 3.01 - Apple retina panel fix - ttm logic inversion fix Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-03net: sparx5: Fix get_stat64 crash in tcpdumpSteen Hegelund1-1/+1
This problem was found with Sparx5 when the tcpdump tool requests the do_get_stats64 (sparx5_get_stats64) statistic. The portstats pointer was incorrectly incremented when fetching priority based statistics. Fixes: af4b11022e2d (net: sparx5: add ethtool configuration and statistics support) Signed-off-by: Steen Hegelund <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-03gcc-plugins/stackleak: Use noinstr in favor of notraceKees Cook1-3/+2
While the stackleak plugin was already using notrace, objtool is now a bit more picky. Update the notrace uses to noinstr. Silences the following objtool warnings when building with: CONFIG_DEBUG_ENTRY=y CONFIG_STACK_VALIDATION=y CONFIG_VMLINUX_VALIDATION=y CONFIG_GCC_PLUGIN_STACKLEAK=y vmlinux.o: warning: objtool: do_syscall_64()+0x9: call to stackleak_track_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: do_int80_syscall_32()+0x9: call to stackleak_track_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: exc_general_protection()+0x22: call to stackleak_track_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: fixup_bad_iret()+0x20: call to stackleak_track_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: do_machine_check()+0x27: call to stackleak_track_stack() leaves .noinstr.text section vmlinux.o: warning: objtool: .text+0x5346e: call to stackleak_erase() leaves .noinstr.text section vmlinux.o: warning: objtool: .entry.text+0x143: call to stackleak_erase() leaves .noinstr.text section vmlinux.o: warning: objtool: .entry.text+0x10eb: call to stackleak_erase() leaves .noinstr.text section vmlinux.o: warning: objtool: .entry.text+0x17f9: call to stackleak_erase() leaves .noinstr.text section Note that the plugin's addition of calls to stackleak_track_stack() from noinstr functions is expected to be safe, as it isn't runtime instrumentation and is self-contained. Cc: Alexander Popov <[email protected]> Suggested-by: Peter Zijlstra <[email protected]> Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-02-03Merge tag 'net-5.17-rc3' of ↵Linus Torvalds78-453/+877
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Jakub Kicinski: "Including fixes from bpf, netfilter, and ieee802154. Current release - regressions: - Partially revert "net/smc: Add netlink net namespace support", fix uABI breakage - netfilter: - nft_ct: fix use after free when attaching zone template - nft_byteorder: track register operations Previous releases - regressions: - ipheth: fix EOVERFLOW in ipheth_rcvbulk_callback - phy: qca8081: fix speeds lower than 2.5Gb/s - sched: fix use-after-free in tc_new_tfilter() Previous releases - always broken: - tcp: fix mem under-charging with zerocopy sendmsg() - tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data() - neigh: do not trigger immediate probes on NUD_FAILED from neigh_managed_work, avoid a deadlock - bpf: use VM_MAP instead of VM_ALLOC for ringbuf, avoid KASAN false-positives - netfilter: nft_reject_bridge: fix for missing reply from prerouting - smc: forward wakeup to smc socket waitqueue after fallback - ieee802154: - return meaningful error codes from the netlink helpers - mcr20a: fix lifs/sifs periods - at86rf230, ca8210: stop leaking skbs on error paths - macsec: add missing un-offload call for NETDEV_UNREGISTER of parent - ax25: add refcount in ax25_dev to avoid UAF bugs - eth: mlx5e: - fix SFP module EEPROM query - fix broken SKB allocation in HW-GRO - IPsec offload: fix tunnel mode crypto for non-TCP/UDP flows - eth: amd-xgbe: - fix skb data length underflow - ensure reset of the tx_timer_active flag, avoid Tx timeouts - eth: stmmac: fix runtime pm use in stmmac_dvr_remove() - eth: e1000e: handshake with CSME starts from Alder Lake platforms" * tag 'net-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (69 commits) ax25: fix reference count leaks of ax25_dev net: stmmac: ensure PTP time register reads are consistent net: ipa: request IPA register values be retained dt-bindings: net: qcom,ipa: add optional qcom,qmp property tools/resolve_btfids: Do not print any commands when building silently bpf: Use VM_MAP instead of VM_ALLOC for ringbuf net, neigh: Do not trigger immediate probes on NUD_FAILED from neigh_managed_work tcp: add missing tcp_skb_can_collapse() test in tcp_shift_skb_data() net: sparx5: do not refer to skb after passing it on Partially revert "net/smc: Add netlink net namespace support" net/mlx5e: Avoid field-overflowing memcpy() net/mlx5e: Use struct_group() for memcpy() region net/mlx5e: Avoid implicit modify hdr for decap drop rule net/mlx5e: IPsec: Fix tunnel mode crypto offload for non TCP/UDP traffic net/mlx5e: IPsec: Fix crypto offload for non TCP/UDP encapsulated traffic net/mlx5e: Don't treat small ceil values as unlimited in HTB offload net/mlx5: E-Switch, Fix uninitialized variable modact net/mlx5e: Fix handling of wrong devices during bond netevent net/mlx5e: Fix broken SKB allocation in HW-GRO net/mlx5e: Fix wrong calculation of header index in HW_GRO ...
2022-02-03Merge tag 'selinux-pr-20220203' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux Pull selinux fix from Paul Moore: "One small SELinux patch to ensure that a policy structure field is properly reset after freeing so that we don't inadvertently do a double-free on certain error conditions" * tag 'selinux-pr-20220203' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux: selinux: fix double free of cond_list on error paths
2022-02-03Merge tag 'linux-kselftest-fixes-5.17-rc3' of ↵Linus Torvalds15-177/+209
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull Kselftest fixes from Shuah Khan: "Important fixes to several tests and documentation clarification on running mainline kselftest on stable releases. A few notable fixes: - fix kselftest run hang due to child processes that haven't been terminated. Fix signals all child processes - fix false pass/fail results from vdso_test_abi, openat2, mincore - build failures when using -j (multiple jobs) option - exec test build failure due to incorrect build rule for a run-time created "pipe" - zram test fixes related to interaction with zram-generator to make sure zram test to coordinate deleted with zram-generator - zram test compression ratio calculation fix and skipping max_comp_streams. - increasing rtc test timeout - cpufreq test to write test results to stdout which will necessary on automated test systems" * tag 'linux-kselftest-fixes-5.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: kselftest: Fix vdso_test_abi return status selftests: skip mincore.check_file_mmap when fs lacks needed support selftests: openat2: Skip testcases that fail with EOPNOTSUPP selftests: openat2: Add missing dependency in Makefile selftests: openat2: Print also errno in failure messages selftests: futex: Use variable MAKE instead of make selftests/exec: Remove pipe from TEST_GEN_FILES selftests/zram: Adapt the situation that /dev/zram0 is being used selftests/zram01.sh: Fix compression ratio calculation selftests/zram: Skip max_comp_streams interface on newer kernel docs/kselftest: clarify running mainline tests on stables kselftest: signal all child processes selftests: cpufreq: Write test output to stdout as well selftests: rtc: Increase test timeout so that all tests run
2022-02-03ax25: fix reference count leaks of ax25_devDuoming Zhou4-19/+41
The previous commit d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs") introduces refcount into ax25_dev, but there are reference leak paths in ax25_ctl_ioctl(), ax25_fwd_ioctl(), ax25_rt_add(), ax25_rt_del() and ax25_rt_opt(). This patch uses ax25_dev_put() and adjusts the position of ax25_addr_ax25dev() to fix reference cout leaks of ax25_dev. Fixes: d01ffb9eee4a ("ax25: add refcount in ax25_dev to avoid UAF bugs") Signed-off-by: Duoming Zhou <[email protected]> Reviewed-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-03net: stmmac: ensure PTP time register reads are consistentYannick Vignon1-7/+12
Even if protected from preemption and interrupts, a small time window remains when the 2 register reads could return inconsistent values, each time the "seconds" register changes. This could lead to an about 1-second error in the reported time. Add logic to ensure the "seconds" and "nanoseconds" values are consistent. Fixes: 92ba6888510c ("stmmac: add the support for PTP hw clock driver") Signed-off-by: Yannick Vignon <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-03Merge https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski7-236/+11
Daniel Borkmann says: ==================== pull-request: bpf 2022-02-03 We've added 6 non-merge commits during the last 10 day(s) which contain a total of 7 files changed, 11 insertions(+), 236 deletions(-). The main changes are: 1) Fix BPF ringbuf to allocate its area with VM_MAP instead of VM_ALLOC flag which otherwise trips over KASAN, from Hou Tao. 2) Fix unresolved symbol warning in resolve_btfids due to LSM callback rename, from Alexei Starovoitov. 3) Fix a possible race in inc_misses_counter() when IRQ would trigger during counter update, from He Fengqing. 4) Fix tooling infra for cross-building with clang upon probing whether gcc provides the standard libraries, from Jean-Philippe Brucker. 5) Fix silent mode build for resolve_btfids, from Nathan Chancellor. 6) Drop unneeded and outdated lirc.h header copy from tooling infra as BPF does not require it anymore, from Sean Young. * https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: tools/resolve_btfids: Do not print any commands when building silently bpf: Use VM_MAP instead of VM_ALLOC for ringbuf tools: Ignore errors from `which' when searching a GCC toolchain tools headers UAPI: remove stale lirc.h bpf: Fix possible race in inc_misses_counter bpf: Fix renaming task_getsecid_subj->current_getsecid_subj. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-03Merge tag 'nvme-5.17-2022-02-03' of git://git.infradead.org/nvme into block-5.17Jens Axboe4-1/+11
Pull NVMe fixes from Christoph: "nvme fixes for Linux 5.17 - fix a use-after-free in rdm and tcp controller reset (Sagi Grimberg) - fix the state check in nvmf_ctlr_matches_baseopts (Uday Shankar)" * tag 'nvme-5.17-2022-02-03' of git://git.infradead.org/nvme: nvme-fabrics: fix state check in nvmf_ctlr_matches_baseopts() nvme-rdma: fix possible use-after-free in transport error_recovery work nvme-tcp: fix possible use-after-free in transport error_recovery work nvme: fix a possible use-after-free in controller reset during load
2022-02-03printk: Fix incorrect __user type in proc_dointvec_minmax_sysadmin()Mickaël Salaün1-1/+1
The move of proc_dointvec_minmax_sysadmin() from kernel/sysctl.c to kernel/printk/sysctl.c introduced an incorrect __user attribute to the buffer argument. I spotted this change in [1] as well as the kernel test robot. Revert this change to please sparse: kernel/printk/sysctl.c:20:51: warning: incorrect type in argument 3 (different address spaces) kernel/printk/sysctl.c:20:51: expected void * kernel/printk/sysctl.c:20:51: got void [noderef] __user *buffer Fixes: faaa357a55e0 ("printk: move printk sysctl to printk/sysctl.c") Link: https://lore.kernel.org/r/[email protected] [1] Reported-by: kernel test robot <[email protected]> Cc: Andrew Morton <[email protected]> Cc: John Ogness <[email protected]> Cc: Luis Chamberlain <[email protected]> Cc: Petr Mladek <[email protected]> Cc: Sergey Senozhatsky <[email protected]> Cc: Steven Rostedt <[email protected]> Cc: Xiaoming Ni <[email protected]> Signed-off-by: Mickaël Salaün <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Torvalds <[email protected]>
2022-02-03Revert "module, async: async_synchronize_full() on module init iff async is ↵Igor Pylypiv3-24/+5
used" This reverts commit 774a1221e862b343388347bac9b318767336b20b. We need to finish all async code before the module init sequence is done. In the reverted commit the PF_USED_ASYNC flag was added to mark a thread that called async_schedule(). Then the PF_USED_ASYNC flag was used to determine whether or not async_synchronize_full() needs to be invoked. This works when modprobe thread is calling async_schedule(), but it does not work if module dispatches init code to a worker thread which then calls async_schedule(). For example, PCI driver probing is invoked from a worker thread based on a node where device is attached: if (cpu < nr_cpu_ids) error = work_on_cpu(cpu, local_pci_probe, &ddi); else error = local_pci_probe(&ddi); We end up in a situation where a worker thread gets the PF_USED_ASYNC flag set instead of the modprobe thread. As a result, async_synchronize_full() is not invoked and modprobe completes without waiting for the async code to finish. The issue was discovered while loading the pm80xx driver: (scsi_mod.scan=async) modprobe pm80xx worker ... do_init_module() ... pci_call_probe() work_on_cpu(local_pci_probe) local_pci_probe() pm8001_pci_probe() scsi_scan_host() async_schedule() worker->flags |= PF_USED_ASYNC; ... < return from worker > ... if (current->flags & PF_USED_ASYNC) <--- false async_synchronize_full(); Commit 21c3c5d28007 ("block: don't request module during elevator init") fixed the deadlock issue which the reverted commit 774a1221e862 ("module, async: async_synchronize_full() on module init iff async is used") tried to fix. Since commit 0fdff3ec6d87 ("async, kmod: warn on synchronous request_module() from async workers") synchronous module loading from async is not allowed. Given that the original deadlock issue is fixed and it is no longer allowed to call synchronous request_module() from async we can remove PF_USED_ASYNC flag to make module init consistently invoke async_synchronize_full() unless async module probe is requested. Signed-off-by: Igor Pylypiv <[email protected]> Reviewed-by: Changyuan Lyu <[email protected]> Reviewed-by: Luis Chamberlain <[email protected]> Acked-by: Tejun Heo <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-02-03Merge branch 'md-fixes' of ↵Jens Axboe1-4/+4
https://git.kernel.org/pub/scm/linux/kernel/git/song/md into block-5.17 Pull MD fix from Song: "Please consider pulling the following fix on top of your block-5.17 branch. It fixes a NULL ptr deref case with nowait." * 'md-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/song/md: md: fix NULL pointer deref with nowait but no mddev->queue
2022-02-03Merge branch 'for-5.17-fixes' of ↵Linus Torvalds2-14/+65
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - Eric's fix for a long standing cgroup1 permission issue where it only checks for uid 0 instead of CAP which inadvertently allows unprivileged userns roots to modify release_agent userhelper - Fixes for the fallout from Waiman's recent cpuset work * 'for-5.17-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/cpuset: Fix "suspicious RCU usage" lockdep warning cgroup-v1: Require capabilities to set release_agent cpuset: Fix the bug that subpart_cpus updated wrongly in update_cpumask() cgroup/cpuset: Make child cpusets restrict parents on v1 hierarchy
2022-02-03Merge branch 'net-ipa-enable-register-retention'Jakub Kicinski4-0/+70
Alex Elder says: ==================== net: ipa: enable register retention With runtime power management in place, we sometimes need to issue a command to enable retention of IPA register values before power collapse. This requires a new Device Tree property, whose presence will also be used to signal that the command is required. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-03net: ipa: request IPA register values be retainedAlex Elder3-0/+64
In some cases, the IPA hardware needs to request the always-on subsystem (AOSS) to coordinate with the IPA microcontroller to retain IPA register values at power collapse. This is done by issuing a QMP request to the AOSS microcontroller. A similar request ondoes that request. We must get and hold the "QMP" handle early, because we might get back EPROBE_DEFER for that. But the actual request should be sent while we know the IPA clock is active, and when we know the microcontroller is operational. Fixes: 1aac309d3207 ("net: ipa: use autosuspend") Signed-off-by: Alex Elder <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-03dt-bindings: net: qcom,ipa: add optional qcom,qmp propertyAlex Elder1-0/+6
For some systems, the IPA driver must make a request to ensure that its registers are retained across power collapse of the IPA hardware. On such systems, we'll use the existence of the "qcom,qmp" property as a signal that this request is required. Signed-off-by: Alex Elder <[email protected]> Signed-off-by: Jakub Kicinski <[email protected]>
2022-02-03cgroup/cpuset: Fix "suspicious RCU usage" lockdep warningWaiman Long1-0/+10
It was found that a "suspicious RCU usage" lockdep warning was issued with the rcu_read_lock() call in update_sibling_cpumasks(). It is because the update_cpumasks_hier() function may sleep. So we have to release the RCU lock, call update_cpumasks_hier() and reacquire it afterward. Also add a percpu_rwsem_assert_held() in update_sibling_cpumasks() instead of stating that in the comment. Fixes: 4716909cc5c5 ("cpuset: Track cpusets that use parent's effective_cpus") Signed-off-by: Waiman Long <[email protected]> Tested-by: Phil Auld <[email protected]> Reviewed-by: Phil Auld <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2022-02-03fs/ext4: fix comments mentioning i_mutexhongnanli8-20/+20
inode->i_mutex has been replaced with inode->i_rwsem long ago. Fix comments still mentioning i_mutex. Signed-off-by: hongnanli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2022-02-03ext4: fix incorrect type issue during replay_del_rangeXin Yin1-2/+3
should not use fast commit log data directly, add le32_to_cpu(). Reported-by: kernel test robot <[email protected]> Fixes: 0b5b5a62b945 ("ext4: use ext4_ext_remove_space() for fast commit replay delete range") Cc: [email protected] Signed-off-by: Xin Yin <[email protected]> Reviewed-by: Ritesh Harjani <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2022-02-03jbd2: fix kernel-doc descriptions for jbd2_journal_shrink_{scan,count}()Yang Li1-0/+4
Add the description of @shrink and @sc in jbd2_journal_shrink_scan() and jbd2_journal_shrink_count() kernel-doc comment to remove warnings found by running scripts/kernel-doc, which is caused by using 'make W=1'. fs/jbd2/journal.c:1296: warning: Function parameter or member 'shrink' not described in 'jbd2_journal_shrink_scan' fs/jbd2/journal.c:1296: warning: Function parameter or member 'sc' not described in 'jbd2_journal_shrink_scan' fs/jbd2/journal.c:1320: warning: Function parameter or member 'shrink' not described in 'jbd2_journal_shrink_count' fs/jbd2/journal.c:1320: warning: Function parameter or member 'sc' not described in 'jbd2_journal_shrink_count' Reported-by: Abaci Robot <[email protected]> Signed-off-by: Yang Li <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]>
2022-02-03ext4: fix potential NULL pointer dereference in ext4_fill_super()Lukas Czerner1-1/+1
By mistake we fail to return an error from ext4_fill_super() in case that ext4_alloc_sbi() fails to allocate a new sbi. Instead we just set the ret variable and allow the function to continue which will later lead to a NULL pointer dereference. Fix it by returning -ENOMEM in the case ext4_alloc_sbi() fails. Fixes: cebe85d570cf ("ext4: switch to the new mount api") Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Lukas Czerner <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected]
2022-02-03jbd2: refactor wait logic for transaction updates into a common functionRitesh Harjani3-38/+38
No functionality change as such in this patch. This only refactors the common piece of code which waits for t_updates to finish into a common function named as jbd2_journal_wait_updates(journal_t *) Signed-off-by: Ritesh Harjani <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/8c564f70f4b2591171677a2a74fccb22a7b6c3a4.1642416995.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <[email protected]>
2022-02-03jbd2: cleanup unused functions declarations from jbd2.hRitesh Harjani1-7/+0
During code review found no references of few of these below function declarations. This patch cleans those up from jbd2.h Signed-off-by: Ritesh Harjani <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/30d1fc327becda197a4136cf9cdc73d9baa3b7b9.1642416995.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <[email protected]>
2022-02-03ext4: fix error handling in ext4_fc_record_modified_inode()Ritesh Harjani1-35/+29
Current code does not fully takes care of krealloc() error case, which could lead to silent memory corruption or a kernel bug. This patch fixes that. Also it cleans up some duplicated error handling logic from various functions in fast_commit.c file. Reported-by: luo penghao <[email protected]> Suggested-by: Lukas Czerner <[email protected]> Signed-off-by: Ritesh Harjani <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/62e8b6a1cce9359682051deb736a3c0953c9d1e9.1642416995.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected]
2022-02-03ext4: remove redundant max inline_size check in ↵Ritesh Harjani1-9/+4
ext4_da_write_inline_data_begin() ext4_prepare_inline_data() already checks for ext4_get_max_inline_size() and returns -ENOSPC. So there is no need to check it twice within ext4_da_write_inline_data_begin(). This patch removes the extra check. It also makes it more clean. No functionality change in this patch. Signed-off-by: Ritesh Harjani <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/cdd1654128d5105550c65fd13ca5da53b2162cc4.1642416995.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <[email protected]>
2022-02-03ext4: fix error handling in ext4_restore_inline_data()Ritesh Harjani1-1/+9
While running "./check -I 200 generic/475" it sometimes gives below kernel BUG(). Ideally we should not call ext4_write_inline_data() if ext4_create_inline_data() has failed. <log snip> [73131.453234] kernel BUG at fs/ext4/inline.c:223! <code snip> 212 static void ext4_write_inline_data(struct inode *inode, struct ext4_iloc *iloc, 213 void *buffer, loff_t pos, unsigned int len) 214 { <...> 223 BUG_ON(!EXT4_I(inode)->i_inline_off); 224 BUG_ON(pos + len > EXT4_I(inode)->i_inline_size); This patch handles the error and prints out a emergency msg saying potential data loss for the given inode (since we couldn't restore the original inline_data due to some previous error). [ 9571.070313] EXT4-fs (dm-0): error restoring inline_data for inode -- potential data loss! (inode 1703982, error -30) Reported-by: Eric Whitney <[email protected]> Signed-off-by: Ritesh Harjani <[email protected]> Reviewed-by: Jan Kara <[email protected]> Link: https://lore.kernel.org/r/9f4cd7dfd54fa58ff27270881823d94ddf78dd07.1642416995.git.riteshh@linux.ibm.com Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected]
2022-02-03ext4: fast commit may miss file actionsXin Yin3-10/+7
in the follow scenario: 1. jbd start transaction n 2. task A get new handle for transaction n+1 3. task A do some actions and add inode to FC_Q_MAIN fc_q 4. jbd complete transaction n and clear FC_Q_MAIN fc_q 5. task A call fsync Fast commit will lost the file actions during a full commit. we should also add updates to staging queue during a full commit. and in ext4_fc_cleanup(), when reset a inode's fc track range, check it's i_sync_tid, if it bigger than current transaction tid, do not rest it, or we will lost the track range. And EXT4_MF_FC_COMMITTING is not needed anymore, so drop it. Signed-off-by: Xin Yin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected]
2022-02-03ext4: fast commit may not fallback for ineligible commitXin Yin11-23/+42
For the follow scenario: 1. jbd start commit transaction n 2. task A get new handle for transaction n+1 3. task A do some ineligible actions and mark FC_INELIGIBLE 4. jbd complete transaction n and clean FC_INELIGIBLE 5. task A call fsync In this case fast commit will not fallback to full commit and transaction n+1 also not handled by jbd. Make ext4_fc_mark_ineligible() also record transaction tid for latest ineligible case, when call ext4_fc_cleanup() check current transaction tid, if small than latest ineligible tid do not clear the EXT4_MF_FC_INELIGIBLE. Reported-by: kernel test robot <[email protected]> Reported-by: Dan Carpenter <[email protected]> Reported-by: Ritesh Harjani <[email protected]> Suggested-by: Harshad Shirwadkar <[email protected]> Signed-off-by: Xin Yin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected]
2022-02-03ext4: modify the logic of ext4_mb_new_blocks_simpleXin Yin1-9/+17
For now in ext4_mb_new_blocks_simple, if we found a block which should be excluded then will switch to next group, this may probably cause 'group' run out of range. Change to check next block in the same group when get a block should be excluded. Also change the search range to EXT4_CLUSTERS_PER_GROUP and add error checking. Signed-off-by: Xin Yin <[email protected]> Reviewed-by: Harshad Shirwadkar <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected]
2022-02-03ext4: prevent used blocks from being allocated during fast commit replayXin Yin3-5/+22
During fast commit replay procedure, we clear inode blocks bitmap in ext4_ext_clear_bb(), this may cause ext4_mb_new_blocks_simple() allocate blocks still in use. Make ext4_fc_record_regions() also record physical disk regions used by inodes during replay procedure. Then ext4_mb_new_blocks_simple() can excludes these blocks in use. Signed-off-by: Xin Yin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Theodore Ts'o <[email protected]> Cc: [email protected]
2022-02-03tools/resolve_btfids: Do not print any commands when building silentlyNathan Chancellor1-1/+5
When building with 'make -s', there is some output from resolve_btfids: $ make -sj"$(nproc)" oldconfig prepare MKDIR .../tools/bpf/resolve_btfids/libbpf/ MKDIR .../tools/bpf/resolve_btfids//libsubcmd LINK resolve_btfids Silent mode means that no information should be emitted about what is currently being done. Use the $(silent) variable from Makefile.include to avoid defining the msg macro so that there is no information printed. Fixes: fbbb68de80a4 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object") Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2022-02-03Revert "mm/gup: small refactoring: simplify try_grab_page()"John Hubbard1-5/+30
This reverts commit 54d516b1d62ff8f17cee2da06e5e4706a0d00b8a That commit did a refactoring that effectively combined fast and slow gup paths (again). And that was again incorrect, for two reasons: a) Fast gup and slow gup get reference counts on pages in different ways and with different goals: see Linus' writeup in commit cd1adf1b63a1 ("Revert "mm/gup: remove try_get_page(), call try_get_compound_head() directly""), and b) try_grab_compound_head() also has a specific check for "FOLL_LONGTERM && !is_pinned(page)", that assumes that the caller can fall back to slow gup. This resulted in new failures, as recently report by Will McVicker [1]. But (a) has problems too, even though they may not have been reported yet. So just revert this. Link: https://lore.kernel.org/r/[email protected] [1] Fixes: 54d516b1d62f ("mm/gup: small refactoring: simplify try_grab_page()") Reported-and-tested-by: Will McVicker <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Minchan Kim <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: [email protected] # 5.15 Signed-off-by: John Hubbard <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-02-03Merge tag 'mips-fixes-5.17_2' of ↵Linus Torvalds2-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - fix missed change for PTR->PTR_WD conversion - kernel-doc fixes * tag 'mips-fixes-5.17_2' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: KVM: fix vz.c kernel-doc notation MIPS: octeon: Fix missed PTR->PTR_WD conversion
2022-02-03KVM: arm64: Workaround Cortex-A510's single-step and PAC trap errataJames Morse5-3/+48
Cortex-A510's erratum #2077057 causes SPSR_EL2 to be corrupted when single-stepping authenticated ERET instructions. A single step is expected, but a pointer authentication trap is taken instead. The erratum causes SPSR_EL1 to be copied to SPSR_EL2, which could allow EL1 to cause a return to EL2 with a guest controlled ELR_EL2. Because the conditions require an ERET into active-not-pending state, this is only a problem for the EL2 when EL2 is stepping EL1. In this case the previous SPSR_EL2 value is preserved in struct kvm_vcpu, and can be restored. Cc: [email protected] # 53960faf2b73: arm64: Add Cortex-A510 CPU part definition Cc: [email protected] Signed-off-by: James Morse <[email protected]> [maz: fixup cpucaps ordering] Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-02-03KVM: arm64: Stop handle_exit() from handling HVC twice when an SError occursJames Morse1-0/+8
Prior to commit defe21f49bc9 ("KVM: arm64: Move PC rollback on SError to HYP"), when an SError is synchronised due to another exception, KVM handles the SError first. If the guest survives, the instruction that triggered the original exception is re-exectued to handle the first exception. HVC is treated as a special case as the instruction wouldn't normally be re-exectued, as its not a trap. Commit defe21f49bc9 didn't preserve the behaviour of the 'return 1' that skips the rest of handle_exit(). Since commit defe21f49bc9, KVM will try to handle the SError and the original exception at the same time. When the exception was an HVC, fixup_guest_exit() has already rolled back ELR_EL2, meaning if the guest has virtual SError masked, it will execute and handle the HVC twice. Restore the original behaviour. Fixes: defe21f49bc9 ("KVM: arm64: Move PC rollback on SError to HYP") Cc: [email protected] Signed-off-by: James Morse <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-02-03KVM: arm64: Avoid consuming a stale esr value when SError occurJames Morse1-1/+2
When any exception other than an IRQ occurs, the CPU updates the ESR_EL2 register with the exception syndrome. An SError may also become pending, and will be synchronised by KVM. KVM notes the exception type, and whether an SError was synchronised in exit_code. When an exception other than an IRQ occurs, fixup_guest_exit() updates vcpu->arch.fault.esr_el2 from the hardware register. When an SError was synchronised, the vcpu esr value is used to determine if the exception was due to an HVC. If so, ELR_EL2 is moved back one instruction. This is so that KVM can process the SError first, and re-execute the HVC if the guest survives the SError. But if an IRQ synchronises an SError, the vcpu's esr value is stale. If the previous non-IRQ exception was an HVC, KVM will corrupt ELR_EL2, causing an unrelated guest instruction to be executed twice. Check ARM_EXCEPTION_CODE() before messing with ELR_EL2, IRQs don't update this register so don't need to check. Fixes: defe21f49bc9 ("KVM: arm64: Move PC rollback on SError to HYP") Cc: [email protected] Reported-by: Steven Price <[email protected]> Signed-off-by: James Morse <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-02-03drm: mxsfb: Fix NULL pointer dereferenceAlexander Stein1-1/+5
mxsfb should not ever dereference the NULL pointer which drm_atomic_get_new_bridge_state is allowed to return. Assume a fixed format instead. Fixes: b776b0f00f24 ("drm: mxsfb: Use bus_format from the nearest bridge if present") Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Marek Vasut <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-02-03iwlwifi: mvm: don't send SAR GEO command for 3160 devicesLuca Coelho3-7/+9
SAR GEO offsets are not supported on 3160 devices. The code was refactored and caused us to start sending the command anyway, which causes a FW assertion failure. Fix that only considering this feature supported on FW API with major version is 17 if the device is not 3160. Additionally, fix the caller of iwl_mvm_sar_geo_init() so that it checks for the return value, which it was ignoring. Reported-by: Len Brown <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Fixes: 78a19d5285d9 ("iwlwifi: mvm: Read the PPAG and SAR tables at INIT stage") Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20220128144623.96f683a89b42.I14e2985bfd7ddd8a8d83eb1869b800c0e7f30db4@changeid
2022-02-03iwlwifi: remove deprecated broadcast filtering featureLuca Coelho8-565/+0
This feature has been deprecated and should not be used anymore. With newer firmwares, namely *-67.ucode and above, trying to use it causes an assertion failure in the FW, similar to this: [Tue Jan 11 20:05:24 2022] iwlwifi 0000:04:00.0: 0x00001062 | ADVANCED_SYSASSERT In order to prevent this feature from being used, remove it entirely and get rid of the Kconfig option that enables it (IWLWIFI_BCAST_FILTERING). Fixes: cbaa6aeedee5 ("iwlwifi: bump FW API to 67 for AX devices") Link: https://bugzilla.kernel.org/show_bug.cgi?id=215488 Cc: [email protected] # 5.16.x Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20220128144623.9241e049f13e.Ia4f282813ca2ddd24c13427823519113f2bbebf2@changeid
2022-02-03iwlwifi: mei: report RFKILL upon register when neededEmmanuel Grumbach1-2/+8
When we register and we are in link protection passive, meaning that the host can't touch the device, report RFKILL immediately upon register() and don't wait for the CSME firmware to let us know again about the link protection state. What happens if we wait is that the host will not see RFKILL soon enough and we'll have a window of time during which it can bring up the device which will request ownership. Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME") Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20220128142706.a136f9f46336.Ief7506dc3b1813a1943a5a639aa45d8e5f284f31@changeid
2022-02-03iwlwifi: mvm: don't feed the hardware RFKILL into iwlmeiEmmanuel Grumbach1-1/+1
iwlmei can trigger a hardware RFKILL when the CSME firmware does not want the host to touch the device. But then, iwlmvm reports RFKILL which makes cfg80211 update iwlmvm about RFKILL. iwlmvm then thinks there is a change in the _software_ rfkill and it calls rfkill_blocked() to fetch the RFKILL state. This returns that RFKILL is blocked (because of iwlmei) and iwlmvm tells iwlmei that _software_ RFKILL is asserted. This is a bug of course. Fix this by checking explicitly the software RFKILL state and not the overall RFKILL state. Fixes: 7ce1f2157e14 ("iwlwifi: mvm: read the rfkill state and feed it to iwlmei") Signed-off-by: Emmanuel Grumbach <[email protected]> Fixes: 7ce1f2157e14 ("iwlwifi: mvm: read the rfkill state and feed it to iwlmei") Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20220128142706.f293861a3f92.I9553d27df1de6fd5756a43ea5f8b89d06fa1a6f2@changeid
2022-02-03iwlwifi: mei: retry mapping the shared areaEmmanuel Grumbach1-9/+26
The shared area is a DMA memory allocated in the host and mapped so that the host and the CSME firmware can exchange data. It is mapped through a dedicated PCI device that is driven by the mei bus driver. The bus driver is in charge of allocating and mapping this memory. It also needs to configure the CSME firmware with a specific set of commands, so that the CSME firmware will know that this memory is meant to be used by its internal WLAN module. For this, the CSME firmware first needs to completely initialize its WLAN module and only then get the mapping request. The problem is that the mei bus enumeration completes before the WLAN is completely ready. This means that the WLAN module's initialization is racing with iwlmei's allocation and mapping flow. Testing showed a problem in resume flows where iwlmei was too fast and the DMA mapping failed. Add a retry mechanism to make sure that we will succeed to map the memory. Fixes: 2da4366f9e2c ("iwlwifi: mei: add the driver to allow cooperation with CSME") Fixes: bcbddc4f9d02 ("iwlwifi: mei: wait before mapping the shared area") Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]> Signed-off-by: Kalle Valo <[email protected]> Link: https://lore.kernel.org/r/iwlwifi.20220128142706.cc51e6a6d635.I4b74a082eb8d89f9e4f556a27c4339c15444dc6c@changeid
Powered by cgit, Gruvboxed by Blaster4385.