aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-02-22genirq/matrix: Handle CPU offlining properThomas Gleixner1-9/+14
At CPU hotunplug the corresponding per cpu matrix allocator is shut down and the allocated interrupt bits are discarded under the assumption that all allocated bits have been either migrated away or shut down through the managed interrupts mechanism. This is not true because interrupts which are not started up might have a vector allocated on the outgoing CPU. When the interrupt is started up later or completely shutdown and freed then the allocated vector is handed back, triggering warnings or causing accounting issues which result in suspend failures and other issues. Change the CPU hotplug mechanism of the matrix allocator so that the remaining allocations at unplug time are preserved and global accounting at hotplug is correctly readjusted to take the dormant vectors into account. Fixes: 2f75d9e1c905 ("genirq: Implement bitmap matrix allocator") Reported-by: Yuriy Vostrikov <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Yuriy Vostrikov <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Randy Dunlap <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-02-22fs/signalfd: fix build error for BUS_MCEERR_ARRandy Dunlap1-3/+12
Fix build error in fs/signalfd.c by using same method that is used in kernel/signal.c: separate blocks for different signal si_code values. ./fs/signalfd.c: error: 'BUS_MCEERR_AR' undeclared (first use in this function) Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Randy Dunlap <[email protected]> Cc: Alexander Viro <[email protected]> Signed-off-by: Eric W. Biederman <[email protected]>
2018-02-22rxrpc: Fix send in rxrpc_send_data_packet()David Howells1-1/+1
All the kernel_sendmsg() calls in rxrpc_send_data_packet() need to send both parts of the iov[] buffer, but one of them does not. Fix it so that it does. Without this, short IPv6 rxrpc DATA packets may be seen that have the rxrpc header included, but no payload. Fixes: 5a924b8951f8 ("rxrpc: Don't store the rxrpc header in the Tx queue sk_buffs") Reported-by: Marc Dionne <[email protected]> Signed-off-by: David Howells <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-22net: aquantia: Fix error handling in aq_pci_probe()Dan Carpenter1-4/+10
We should check "self->aq_hw" for allocation failure, and also we should free it on the error paths. Fixes: 23ee07ad3c2f ("net: aquantia: Cleanup pci functions module") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-22bpf: fix rcu lockdep warning for lpm_trie map_free callbackYonghong Song1-2/+1
Commit 9a3efb6b661f ("bpf: fix memory leak in lpm_trie map_free callback function") fixed a memory leak and removed unnecessary locks in map_free callback function. Unfortrunately, it introduced a lockdep warning. When lockdep checking is turned on, running tools/testing/selftests/bpf/test_lpm_map will have: [ 98.294321] ============================= [ 98.294807] WARNING: suspicious RCU usage [ 98.295359] 4.16.0-rc2+ #193 Not tainted [ 98.295907] ----------------------------- [ 98.296486] /home/yhs/work/bpf/kernel/bpf/lpm_trie.c:572 suspicious rcu_dereference_check() usage! [ 98.297657] [ 98.297657] other info that might help us debug this: [ 98.297657] [ 98.298663] [ 98.298663] rcu_scheduler_active = 2, debug_locks = 1 [ 98.299536] 2 locks held by kworker/2:1/54: [ 98.300152] #0: ((wq_completion)"events"){+.+.}, at: [<00000000196bc1f0>] process_one_work+0x157/0x5c0 [ 98.301381] #1: ((work_completion)(&map->work)){+.+.}, at: [<00000000196bc1f0>] process_one_work+0x157/0x5c0 Since actual trie tree removal happens only after no other accesses to the tree are possible, replacing rcu_dereference_protected(*slot, lockdep_is_held(&trie->lock)) with rcu_dereference_protected(*slot, 1) fixed the issue. Fixes: 9a3efb6b661f ("bpf: fix memory leak in lpm_trie map_free callback function") Reported-by: Eric Dumazet <[email protected]> Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Acked-by: David S. Miller <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-02-22bpf: add schedule points in percpu arrays managementEric Dumazet1-1/+4
syszbot managed to trigger RCU detected stalls in bpf_array_free_percpu() It takes time to allocate a huge percpu map, but even more time to free it. Since we run in process context, use cond_resched() to yield cpu if needed. Fixes: a10423b87a7e ("bpf: introduce BPF_MAP_TYPE_PERCPU_ARRAY map") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-02-22Merge tag 'mac80211-for-davem-2018-02-22' of ↵David S. Miller11-27/+41
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== Various fixes across the tree, the shortlog basically says it all: cfg80211: fix cfg80211_beacon_dup -> old bug in this code cfg80211: clear wep keys after disconnection -> certain ways of disconnecting left the keys mac80211: round IEEE80211_TX_STATUS_HEADROOM up to multiple of 4 -> alignment issues with using 14 bytes mac80211: Do not disconnect on invalid operating class -> if the AP has a bogus operating class, let it be mac80211: Fix sending ADDBA response for an ongoing session -> don't send the same frame twice cfg80211: use only 1Mbps for basic rates in mesh -> interop issue with old versions of our code mac80211_hwsim: don't use WQ_MEM_RECLAIM -> it causes splats because it flushes work on a non-reclaim WQ regulatory: add NUL to request alpha2 -> nla_put_string() issue from Kees mac80211: mesh: fix wrong mesh TTL offset calculation -> protocol issue mac80211: fix a possible leak of station stats -> error path might leak memory mac80211: fix calling sleeping function in atomic context -> percpu allocations need to be made with gfp flags ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-22Merge tag 'usb-4.16-rc3' of ↵Linus Torvalds38-133/+350
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of USB fixes for 4.16-rc3 Nothing major, but a number of different fixes all over the place in the USB stack for reported issues. Mostly gadget driver fixes, although the typical set of xhci bugfixes are there, along with some new quirks additions as well. All of these have been in linux-next for a while with no reported issues" * tag 'usb-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (39 commits) Revert "usb: musb: host: don't start next rx urb if current one failed" usb: musb: fix enumeration after resume usb: cdc_acm: prevent race at write to acm while system resumes Add delay-init quirk for Corsair K70 RGB keyboards usb: ohci: Proper handling of ed_rm_list to handle race condition between usb_kill_urb() and finish_unlinks() usb: host: ehci: always enable interrupt for qtd completion at test mode usb: ldusb: add PIDs for new CASSY devices supported by this driver usb: renesas_usbhs: missed the "running" flag in usb_dmac with rx path usb: host: ehci: use correct device pointer for dma ops usbip: keep usbip_device sockfd state in sync with tcp_socket ohci-hcd: Fix race condition caused by ohci_urb_enqueue() and io_watchdog_func() USB: serial: option: Add support for Quectel EP06 xhci: fix xhci debugfs errors in xhci_stop xhci: xhci debugfs device nodes weren't removed after device plugged out xhci: Fix xhci debugfs devices node disappearance after hibernation xhci: Fix NULL pointer in xhci debugfs xhci: Don't print a warning when setting link state for disabled ports xhci: workaround for AMD Promontory disabled ports wakeup usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume USB: gadget: udc: Add missing platform_device_put() on error in bdc_pci_probe() ...
2018-02-22Merge tag 'staging-4.16-rc2' of ↵Linus Torvalds10-30/+64
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging/IIO fixes from Greg KH: "Here are a small number of staging and iio driver fixes for 4.16-rc2. The IIO fixes are all for reported things, and the android driver fixes also resolve some reported problems. The remaining fsl-mc Kconfig change resolves a build testing error that Arnd reported. All of these have been in linux-next with no reported issues" * tag 'staging-4.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: iio: buffer: check if a buffer has been set up when poll is called iio: adis_lib: Initialize trigger before requesting interrupt staging: android: ion: Zero CMA allocated memory staging: android: ashmem: Fix a race condition in pin ioctls staging: fsl-mc: fix build testing on x86 iio: srf08: fix link error "devm_iio_triggered_buffer_setup" undefined staging: iio: ad5933: switch buffer mode to software iio: adc: stm32: fix stm32h7_adc_enable error handling staging: iio: adc: ad7192: fix external frequency setting iio: adc: aspeed: Fix error handling path
2018-02-22Merge tag 'char-misc-4.16-rc3' of ↵Linus Torvalds7-45/+45
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are a handful of char/misc driver fixes for 4.16-rc3. There are some binder driver fixes to resolve reported issues in stress testing the recent binder changes, some extcon driver fixes, and a few mei driver fixes and new device ids. All of these, with the exception of the mei driver id additions, have been in linux-next for a while. I forgot to push out the mei driver id additions to kernel.org until today, but all build tests pass with them enabled" * tag 'char-misc-4.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: mei: me: add cannon point device ids for 4th device mei: me: add cannon point device ids mei: set device client to the disconnected state upon suspend. ANDROID: binder: synchronize_rcu() when using POLLFREE. binder: replace "%p" with "%pK" ANDROID: binder: remove WARN() for redundant txn error binder: check for binder_thread allocation failure in binder_poll() extcon: int3496: process id-pin first so that we start with the right status Revert "extcon: axp288: Redo charger type detection a couple of seconds after probe()" extcon: axp288: Constify the axp288_pwr_up_down_info array
2018-02-22regulatory: add NUL to request alpha2Johannes Berg1-1/+1
Similar to the ancient commit a5fe8e7695dc ("regulatory: add NUL to alpha2"), add another byte to alpha2 in the request struct so that when we use nla_put_string(), we don't overrun anything. Fixes: 73d54c9e74c4 ("cfg80211: add regulatory netlink multicast group") Reported-by: Kees Cook <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-02-22Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds23-115/+242
Pull rdma fixes from Doug Ledford: "Nothing in this is overly interesting, it's mostly your garden variety fixes. There was some work in this merge cycle around the new ioctl kABI, so there are fixes in here related to that (probably with more to come). We've also recently added new netlink support with a goal of moving the primary means of configuring the entire subsystem to netlink (eventually, this is a long term project), so there are fixes for that. Then a few bnxt_re driver fixes, and a few minor WARN_ON removals, and that covers this pull request. There are already a few more fixes on the list as of this morning, so there will certainly be more to come in this rc cycle ;-) Summary: - Lots of fixes for the new IOCTL interface and general uverbs flow. Found through testing and syzkaller - Bugfixes for the new resource track netlink reporting - Remove some unneeded WARN_ONs that were triggering for some users in IPoIB - Various fixes for the bnxt_re driver" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (27 commits) RDMA/uverbs: Fix kernel panic while using XRC_TGT QP type RDMA/bnxt_re: Avoid system hang during device un-reg RDMA/bnxt_re: Fix system crash during load/unload RDMA/bnxt_re: Synchronize destroy_qp with poll_cq RDMA/bnxt_re: Unpin SQ and RQ memory if QP create fails RDMA/bnxt_re: Disable atomic capability on bnxt_re adapters RDMA/restrack: don't use uaccess_kernel() RDMA/verbs: Check existence of function prior to accessing it RDMA/vmw_pvrdma: Fix usage of user response structures in ABI file RDMA/uverbs: Sanitize user entered port numbers prior to access it RDMA/uverbs: Fix circular locking dependency RDMA/uverbs: Fix bad unlock balance in ib_uverbs_close_xrcd RDMA/restrack: Increment CQ restrack object before committing RDMA/uverbs: Protect from command mask overflow IB/uverbs: Fix unbalanced unlock on error path for rdma_explicit_destroy IB/uverbs: Improve lockdep_check RDMA/uverbs: Protect from races between lookup and destroy of uobjects IB/uverbs: Hold the uobj write lock after allocate IB/uverbs: Fix possible oops with duplicate ioctl attributes IB/uverbs: Add ioctl support for 32bit processes ...
2018-02-22Merge tag 'riscv-for-linus-4.16-rc3-riscv_cleanups' of ↵Linus Torvalds4-7/+5
git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux Pull RISC-V cleanups from Palmer Dabbelt: "This contains a handful of small cleanups. The only functional change is that IRQs are now enabled during exception handling, which was found when some warnings triggered with `CONFIG_DEBUG_ATOMIC_SLEEP=y`. The remaining fixes should have no functional change: `sbi_save()` has been renamed to `parse_dtb()` reflect what it actually does, and a handful of unused Kconfig entries have been removed" * tag 'riscv-for-linus-4.16-rc3-riscv_cleanups' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: Rename sbi_save to parse_dtb to improve code readability RISC-V: Enable IRQ during exception handling riscv: Remove ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE select riscv: kconfig: Remove RISCV_IRQ_INTC select riscv: Remove ARCH_WANT_OPTIONAL_GPIOLIB select
2018-02-22ibmvnic: Fix early release of login bufferThomas Falcon1-1/+1
The login buffer is released before the driver can perform sanity checks between resources the driver requested and what firmware will provide. Don't release the login buffer until the sanity check is performed. Fixes: 34f0f4e3f488 ("ibmvnic: Fix login buffer memory leaks") Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-22net/smc9194: Remove bogus CONFIG_MAC referenceFinn Thain1-1/+1
AFAIK the only version of smc9194.c with Mac support is the one in the linux-mac68k CVS repo, which never made it to the mainline. Despite that, from v2.3.45, arch/m68k/config.in listed CONFIG_SMC9194 under CONFIG_MAC. This mistake got carried over into Kconfig in v2.5.55. (See pre-git era "[PATCH] add m68k dependencies to net driver config".) Signed-off-by: Finn Thain <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-22net: ipv4: Set addr_type in hash_keys for forwarded caseDavid Ahern1-0/+2
The result of the skb flow dissect is copied from keys to hash_keys to ensure only the intended data is hashed. The original L4 hash patch overlooked setting the addr_type for this case; add it. Fixes: bf4e0a3db97eb ("net: ipv4: add support for ECMP hash policy choice") Reported-by: Ido Schimmel <[email protected]> Signed-off-by: David Ahern <[email protected]> Acked-by: Nikolay Aleksandrov <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-22tcp_bbr: better deal with suboptimal GSOEric Dumazet1-4/+5
BBR uses tcp_tso_autosize() in an attempt to probe what would be the burst sizes and to adjust cwnd in bbr_target_cwnd() with following gold formula : /* Allow enough full-sized skbs in flight to utilize end systems. */ cwnd += 3 * bbr->tso_segs_goal; But GSO can be lacking or be constrained to very small units (ip link set dev ... gso_max_segs 2) What we really want is to have enough packets in flight so that both GSO and GRO are efficient. So in the case GSO is off or downgraded, we still want to have the same number of packets in flight as if GSO/TSO was fully operational, so that GRO can hopefully be working efficiently. To fix this issue, we make tcp_tso_autosize() unaware of sk->sk_gso_max_segs Only tcp_tso_segs() has to enforce the gso_max_segs limit. Tested: ethtool -K eth0 tso off gso off tc qd replace dev eth0 root pfifo_fast Before patch: for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done     691  (ss -temoi shows cwnd is stuck around 6 )     667     651     631     517 After patch : # for f in {1..5}; do ./super_netperf 1 -H lpaa24 -- -K bbr; done    1733 (ss -temoi shows cwnd is around 386 )    1778    1746    1781    1718 Fixes: 0f8782ea1497 ("tcp_bbr: add BBR congestion control") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: Oleksandr Natalenko <[email protected]> Acked-by: Neal Cardwell <[email protected]> Acked-by: Soheil Hassas Yeganeh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-22smsc75xx: fix smsc75xx_set_features()Eric Dumazet1-3/+4
If an attempt is made to disable RX checksums, USB adapter is changed but netdev->features is not, because smsc75xx_set_features() returns a non zero value. This throws errors from netdev_rx_csum_fault() : <devname>: hw csum failure Signed-off-by: Eric Dumazet <[email protected]> Cc: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-22netlink: put module reference if dump start failsJason A. Donenfeld1-1/+3
Before, if cb->start() failed, the module reference would never be put, because cb->cb_running is intentionally false at this point. Users are generally annoyed by this because they can no longer unload modules that leak references. Also, it may be possible to tediously wrap a reference counter back to zero, especially since module.c still uses atomic_inc instead of refcount_inc. This patch expands the error path to simply call module_put if cb->start() fails. Fixes: 41c87425a1ac ("netlink: do not set cb_running if dump's start() errs") Signed-off-by: Jason A. Donenfeld <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-22Merge tag 'seccomp-v4.16-rc3' of ↵James Morris3-4/+67
https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux into fixes-v4.16-rc3 - Fix seccomp GET_METADATA to deal with field sizes correctly (Tycho Andersen) - Add selftest to make sure GET_METADATA doesn't regress (Tycho Andersen)
2018-02-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds40-155/+180
Merge misc fixes from Andrew Morton: "16 fixes" * emailed patches from Andrew Morton <[email protected]>: mm: don't defer struct page initialization for Xen pv guests lib/Kconfig.debug: enable RUNTIME_TESTING_MENU vmalloc: fix __GFP_HIGHMEM usage for vmalloc_32 on 32b systems selftests/memfd: add run_fuse_test.sh to TEST_FILES bug.h: work around GCC PR82365 in BUG() mm/swap.c: make functions and their kernel-doc agree (again) mm/zpool.c: zpool_evictable: fix mismatch in parameter name and kernel-doc ida: do zeroing in ida_pre_get() mm, swap, frontswap: fix THP swap if frontswap enabled certs/blacklist_nohashes.c: fix const confusion in certs blacklist kernel/relay.c: limit kmalloc size to KMALLOC_MAX_SIZE mm, mlock, vmscan: no more skipping pagevecs mm: memcontrol: fix NR_WRITEBACK leak in memcg and system stats Kbuild: always define endianess in kconfig.h include/linux/sched/mm.h: re-inline mmdrop() tools: fix cross-compile var clobbering
2018-02-22efivarfs: Limit the rate for non-root to read filesLuck, Tony3-0/+13
Each read from a file in efivarfs results in two calls to EFI (one to get the file size, another to get the actual data). On X86 these EFI calls result in broadcast system management interrupts (SMI) which affect performance of the whole system. A malicious user can loop performing reads from efivarfs bringing the system to its knees. Linus suggested per-user rate limit to solve this. So we add a ratelimit structure to "user_struct" and initialize it for the root user for no limit. When allocating user_struct for other users we set the limit to 100 per second. This could be used for other places that want to limit the rate of some detrimental user action. In efivarfs if the limit is exceeded when reading, we take an interruptible nap for 50ms and check the rate limit again. Signed-off-by: Tony Luck <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-02-22kconfig.h: Include compiler types to avoid missed struct attributesKees Cook1-0/+3
The header files for some structures could get included in such a way that struct attributes (specifically __randomize_layout from path.h) would be parsed as variable names instead of attributes. This could lead to some instances of a structure being unrandomized, causing nasty GPFs, etc. This patch makes sure the compiler_types.h header is included in kconfig.h so that we've always got types and struct attributes defined, since kconfig.h is included from the compiler command line. Reported-by: Patrick McLean <[email protected]> Root-caused-by: Maciej S. Szmigiero <[email protected]> Suggested-by: Linus Torvalds <[email protected]> Tested-by: Maciej S. Szmigiero <[email protected]> Fixes: 3859a271a003 ("randstruct: Mark various structs for randomization") Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-02-22NFS: make struct nlmclnt_fl_close_lock_ops staticColin Ian King1-1/+1
The structure nlmclnt_fl_close_lock_ops s local to the source and does not need to be in global scope, so make it static. Cleans up sparse warning: fs/nfs/nfs3proc.c:876:33: warning: symbol 'nlmclnt_fl_close_lock_ops' was not declared. Should it be static? Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2018-02-22nfs: system crashes after NFS4ERR_MOVED recovery[email protected]1-2/+4
nfs4_update_server unconditionally releases the nfs_client for the source server. If migration fails, this can cause the source server's nfs_client struct to be left with a low reference count, resulting in use-after-free. Also, adjust reference count handling for ELOOP. NFS: state manager: migration failed on NFSv4 server nfsvmu10 with error 6 WARNING: CPU: 16 PID: 17960 at fs/nfs/client.c:281 nfs_put_client+0xfa/0x110 [nfs]() nfs_put_client+0xfa/0x110 [nfs] nfs4_run_state_manager+0x30/0x40 [nfsv4] kthread+0xd8/0xf0 BUG: unable to handle kernel NULL pointer dereference at 00000000000002a8 nfs4_xdr_enc_write+0x6b/0x160 [nfsv4] rpcauth_wrap_req+0xac/0xf0 [sunrpc] call_transmit+0x18c/0x2c0 [sunrpc] __rpc_execute+0xa6/0x490 [sunrpc] rpc_async_schedule+0x15/0x20 [sunrpc] process_one_work+0x160/0x470 worker_thread+0x112/0x540 ? rescuer_thread+0x3f0/0x3f0 kthread+0xd8/0xf0 This bug was introduced by 32e62b7c ("NFS: Add nfs4_update_server"), but the fix applies cleanly to 52442f9b ("NFS4: Avoid migration loops") Reported-by: Helen Chao <[email protected]> Fixes: 52442f9b11b7 ("NFS4: Avoid migration loops") Signed-off-by: Bill Baker <[email protected]> Reviewed-by: Chuck Lever <[email protected]> Signed-off-by: Trond Myklebust <[email protected]>
2018-02-22x86: Treat R_X86_64_PLT32 as R_X86_64_PC32H.J. Lu3-0/+5
On i386, there are 2 types of PLTs, PIC and non-PIC. PIE and shared objects must use PIC PLT. To use PIC PLT, you need to load _GLOBAL_OFFSET_TABLE_ into EBX first. There is no need for that on x86-64 since x86-64 uses PC-relative PLT. On x86-64, for 32-bit PC-relative branches, we can generate PLT32 relocation, instead of PC32 relocation, which can also be used as a marker for 32-bit PC-relative branches. Linker can always reduce PLT32 relocation to PC32 if function is defined locally. Local functions should use PC32 relocation. As far as Linux kernel is concerned, R_X86_64_PLT32 can be treated the same as R_X86_64_PC32 since Linux kernel doesn't use PLT. R_X86_64_PLT32 for 32-bit PC-relative branches has been enabled in binutils master branch which will become binutils 2.31. [ hjl is working on having better documentation on this all, but a few more notes from him: "PLT32 relocation is used as marker for PC-relative branches. Because of EBX, it looks odd to generate PLT32 relocation on i386 when EBX doesn't have GOT. As for symbol resolution, PLT32 and PC32 relocations are almost interchangeable. But when linker sees PLT32 relocation against a protected symbol, it can resolved locally at link-time since it is used on a branch instruction. Linker can't do that for PC32 relocation" but for the kernel use, the two are basically the same, and this commit gets things building and working with the current binutils master - Linus ] Signed-off-by: H.J. Lu <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-02-22KEYS: Use individual pages in big_key for crypto buffersDavid Howells1-23/+87
kmalloc() can't always allocate large enough buffers for big_key to use for crypto (1MB + some metadata) so we cannot use that to allocate the buffer. Further, vmalloc'd pages can't be passed to sg_init_one() and the aead crypto accessors cannot be called progressively and must be passed all the data in one go (which means we can't pass the data in one block at a time). Fix this by allocating the buffer pages individually and passing them through a multientry scatterlist to the crypto layer. This has the bonus advantage that we don't have to allocate a contiguous series of pages. We then vmap() the page list and pass that through to the VFS read/write routines. This can trigger a warning: WARNING: CPU: 0 PID: 60912 at mm/page_alloc.c:3883 __alloc_pages_nodemask+0xb7c/0x15f8 ([<00000000002acbb6>] __alloc_pages_nodemask+0x1ee/0x15f8) [<00000000002dd356>] kmalloc_order+0x46/0x90 [<00000000002dd3e0>] kmalloc_order_trace+0x40/0x1f8 [<0000000000326a10>] __kmalloc+0x430/0x4c0 [<00000000004343e4>] big_key_preparse+0x7c/0x210 [<000000000042c040>] key_create_or_update+0x128/0x420 [<000000000042e52c>] SyS_add_key+0x124/0x220 [<00000000007bba2c>] system_call+0xc4/0x2b0 from the keyctl/padd/useradd test of the keyutils testsuite on s390x. Note that it might be better to shovel data through in page-sized lumps instead as there's no particular need to use a monolithic buffer unless the kernel itself wants to access the data. Fixes: 13100a72f40f ("Security: Keys: Big keys stored encrypted") Reported-by: Paul Bunyan <[email protected]> Signed-off-by: David Howells <[email protected]> cc: Kirill Marinushkin <[email protected]>
2018-02-22X.509: fix NULL dereference when restricting key with unsupported_sigEric Biggers1-8/+13
The asymmetric key type allows an X.509 certificate to be added even if its signature's hash algorithm is not available in the crypto API. In that case 'payload.data[asym_auth]' will be NULL. But the key restriction code failed to check for this case before trying to use the signature, resulting in a NULL pointer dereference in key_or_keyring_common() or in restrict_link_by_signature(). Fix this by returning -ENOPKG when the signature is unsupported. Reproducer when all the CONFIG_CRYPTO_SHA512* options are disabled and keyctl has support for the 'restrict_keyring' command: keyctl new_session keyctl restrict_keyring @s asymmetric builtin_trusted openssl req -new -sha512 -x509 -batch -nodes -outform der \ | keyctl padd asymmetric desc @s Fixes: a511e1af8b12 ("KEYS: Move the point of trust determination to __key_link()") Cc: <[email protected]> # v4.7+ Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: David Howells <[email protected]>
2018-02-22X.509: fix BUG_ON() when hash algorithm is unsupportedEric Biggers1-1/+3
The X.509 parser mishandles the case where the certificate's signature's hash algorithm is not available in the crypto API. In this case, x509_get_sig_params() doesn't allocate the cert->sig->digest buffer; this part seems to be intentional. However, public_key_verify_signature() is still called via x509_check_for_self_signed(), which triggers the 'BUG_ON(!sig->digest)'. Fix this by making public_key_verify_signature() return -ENOPKG if the hash buffer has not been allocated. Reproducer when all the CONFIG_CRYPTO_SHA512* options are disabled: openssl req -new -sha512 -x509 -batch -nodes -outform der \ | keyctl padd asymmetric desc @s Fixes: 6c2dc5ae4ab7 ("X.509: Extract signature digest and make self-signed cert checks earlier") Reported-by: Paolo Valente <[email protected]> Cc: Paolo Valente <[email protected]> Cc: <[email protected]> # v4.7+ Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: David Howells <[email protected]>
2018-02-22PKCS#7: fix direct verification of SignerInfo signatureEric Biggers1-0/+1
If none of the certificates in a SignerInfo's certificate chain match a trusted key, nor is the last certificate signed by a trusted key, then pkcs7_validate_trust_one() tries to check whether the SignerInfo's signature was made directly by a trusted key. But, it actually fails to set the 'sig' variable correctly, so it actually verifies the last signature seen. That will only be the SignerInfo's signature if the certificate chain is empty; otherwise it will actually be the last certificate's signature. This is not by itself a security problem, since verifying any of the certificates in the chain should be sufficient to verify the SignerInfo. Still, it's not working as intended so it should be fixed. Fix it by setting 'sig' correctly for the direct verification case. Fixes: 757932e6da6d ("PKCS#7: Handle PKCS#7 messages that contain no X.509 certs") Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: David Howells <[email protected]>
2018-02-22PKCS#7: fix certificate blacklistingEric Biggers1-4/+6
If there is a blacklisted certificate in a SignerInfo's certificate chain, then pkcs7_verify_sig_chain() sets sinfo->blacklisted and returns 0. But, pkcs7_verify() fails to handle this case appropriately, as it actually continues on to the line 'actual_ret = 0;', indicating that the SignerInfo has passed verification. Consequently, PKCS#7 signature verification ignores the certificate blacklist. Fix this by not considering blacklisted SignerInfos to have passed verification. Also fix the function comment with regards to when 0 is returned. Fixes: 03bb79315ddc ("PKCS#7: Handle blacklisted certificates") Cc: <[email protected]> # v4.12+ Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: David Howells <[email protected]>
2018-02-22PKCS#7: fix certificate chain verificationEric Biggers1-1/+1
When pkcs7_verify_sig_chain() is building the certificate chain for a SignerInfo using the certificates in the PKCS#7 message, it is passing the wrong arguments to public_key_verify_signature(). Consequently, when the next certificate is supposed to be used to verify the previous certificate, the next certificate is actually used to verify itself. An attacker can use this bug to create a bogus certificate chain that has no cryptographic relationship between the beginning and end. Fortunately I couldn't quite find a way to use this to bypass the overall signature verification, though it comes very close. Here's the reasoning: due to the bug, every certificate in the chain beyond the first actually has to be self-signed (where "self-signed" here refers to the actual key and signature; an attacker might still manipulate the certificate fields such that the self_signed flag doesn't actually get set, and thus the chain doesn't end immediately). But to pass trust validation (pkcs7_validate_trust()), either the SignerInfo or one of the certificates has to actually be signed by a trusted key. Since only self-signed certificates can be added to the chain, the only way for an attacker to introduce a trusted signature is to include a self-signed trusted certificate. But, when pkcs7_validate_trust_one() reaches that certificate, instead of trying to verify the signature on that certificate, it will actually look up the corresponding trusted key, which will succeed, and then try to verify the *previous* certificate, which will fail. Thus, disaster is narrowly averted (as far as I could tell). Fixes: 6c2dc5ae4ab7 ("X.509: Extract signature digest and make self-signed cert checks earlier") Cc: <[email protected]> # v4.7+ Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: David Howells <[email protected]>
2018-02-22selftests/bpf/test_maps: exit child process without error in ENOMEM caseLi Zhijian1-0/+2
test_maps contains a series of stress tests, and previously it will break the rest tests when it failed to alloc memory. ----------------------- Failed to create hashmap key=8 value=262144 'Cannot allocate memory' Failed to create hashmap key=16 value=262144 'Cannot allocate memory' Failed to create hashmap key=8 value=262144 'Cannot allocate memory' Failed to create hashmap key=8 value=262144 'Cannot allocate memory' test_maps: test_maps.c:955: run_parallel: Assertion `status == 0' failed. Aborted not ok 1..3 selftests: test_maps [FAIL] ----------------------- after this patch, the rest tests will be continue when it occurs an ENOMEM failure CC: Alexei Starovoitov <[email protected]> CC: Philip Li <[email protected]> Suggested-by: Daniel Borkmann <[email protected]> Signed-off-by: Li Zhijian <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-02-22arm64: Enforce BBM for huge IO/VMAP mappingsWill Deacon1-0/+10
ioremap_page_range doesn't honour break-before-make and attempts to put down huge mappings (using p*d_set_huge) over the top of pre-existing table entries. This leads to us leaking page table memory and also gives rise to TLB conflicts and spurious aborts, which have been seen in practice on Cortex-A75. Until this has been resolved, refuse to put block mappings when the existing entry is found to be present. Fixes: 324420bf91f60 ("arm64: add support for ioremap() block mappings") Reported-by: Hanjun Guo <[email protected]> Reported-by: Lei Li <[email protected]> Acked-by: Ard Biesheuvel <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Catalin Marinas <[email protected]>
2018-02-22i2c: designware: Consider SCL GPIO optionalAndy Shevchenko1-1/+1
GPIO library can return -ENOSYS for the failed request. Instead of failing ->probe() in this case override error code to 0. Fixes: ca382f5b38f3 ("i2c: designware: add i2c gpio recovery option") Reported-by: Dominik Brodowski <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Tested-by: Dominik Brodowski <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2018-02-22i2c: busses: i2c-sirf: Fix spelling: "formular" -> "formula".Patryk Kocielnik1-2/+2
Fix spelling. Signed-off-by: Patryk Kocielnik <[email protected]> [wsa: fixed "Initialization", too] Signed-off-by: Wolfram Sang <[email protected]>
2018-02-22i2c: bcm2835: Set up the rising/falling edge delaysEric Anholt1-1/+20
We were leaving them in the power on state (or the state the firmware had set up for some client, if we were taking over from them). The boot state was 30 core clocks, when we actually want to sample some time after (to make sure that the new input bit has actually arrived). Signed-off-by: Eric Anholt <[email protected]> Signed-off-by: Boris Brezillon <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2018-02-22treewide/trivial: Remove ';;$' typo noiseIngo Molnar17-19/+19
On lkml suggestions were made to split up such trivial typo fixes into per subsystem patches: --- a/arch/x86/boot/compressed/eboot.c +++ b/arch/x86/boot/compressed/eboot.c @@ -439,7 +439,7 @@ setup_uga32(void **uga_handle, unsigned long size, u32 *width, u32 *height) struct efi_uga_draw_protocol *uga = NULL, *first_uga; efi_guid_t uga_proto = EFI_UGA_PROTOCOL_GUID; unsigned long nr_ugas; - u32 *handles = (u32 *)uga_handle;; + u32 *handles = (u32 *)uga_handle; efi_status_t status = EFI_INVALID_PARAMETER; int i; This patch is the result of the following script: $ sed -i 's/;;$/;/g' $(git grep -E ';;$' | grep "\.[ch]:" | grep -vwE 'for|ia64' | cut -d: -f1 | sort | uniq) ... followed by manual review to make sure it's all good. Splitting this up is just crazy talk, let's get over with this and just do it. Reported-by: Pavel Machek <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-02-22powerpc/bpf/jit: Fix 32-bit JIT for seccomp_data accessMark Lord1-0/+3
I am using SECCOMP to filter syscalls on a ppc32 platform, and noticed that the JIT compiler was failing on the BPF even though the interpreter was working fine. The issue was that the compiler was missing one of the instructions used by SECCOMP, so here is a patch to enable JIT for that instruction. Fixes: eb84bab0fb38 ("ppc: Kconfig: Enable BPF JIT on ppc32") Signed-off-by: Mark Lord <[email protected]> Acked-by: Naveen N. Rao <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-02-22powerpc/pseries: Revert support for ibm,drc-info devtree propertyMichael Bringmann1-1/+1
This reverts commit 02ef6dd8109b581343ebeb1c4c973513682535d6. The earlier patch tried to enable support for a new property "ibm,drc-info" on powerpc systems. Unfortunately, some errors in the associated patch set break things in some of the DLPAR operations. In particular when attempting to hot-add a new CPU or set of CPUs, the original patch failed to properly calculate the available resources, and aborted the operation. In addition, the original set missed several opportunities to compress and reuse common code. As the associated patch set was meant to provide an optimization of storage and performance of a set of device-tree properties for future systems with large amounts of resources, reverting just restores the previous behavior for existing systems. It seems unnecessary to enable this feature and introduce the consequent problems in the field that it will cause at this time, so please revert it for now until testing of the corrections are finished properly. Fixes: 02ef6dd8109b ("powerpc: Enable support for ibm,drc-info devtree property") Signed-off-by: Michael W. Bringmann <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2018-02-22powerpc/pseries: Fix duplicate firmware feature for DRC_INFOMichael Ellerman1-1/+1
We had a mid-air collision between two new firmware features, DRMEM_V2 and DRC_INFO, and they ended up with the same value. No one's actually reported any problems, presumably because the new firmware that supports both properties is not widely available, and the two properties tend to be enabled together. Still if we ever had one enabled but not the other, the bugs that could result are many and varied. So fix it. Fixes: 3f38000eda48 ("powerpc/firmware: Add definitions for new drc-info firmware feature") Signed-off-by: Michael Ellerman <[email protected]> Reviewed-by: Tyrel Datwyler <[email protected]>
2018-02-21seccomp: add a selftest for get_metadataTycho Andersen1-0/+61
Let's test that we get the flags correctly, and that we preserve the filter index across the ptrace(PTRACE_SECCOMP_GET_METADATA) correctly. Signed-off-by: Tycho Andersen <[email protected]> CC: Kees Cook <[email protected]> Signed-off-by: Kees Cook <[email protected]>
2018-02-21ptrace, seccomp: tweak get_metadata behavior slightlyTycho Andersen1-2/+4
Previously if users passed a small size for the input structure size, they would get get odd behavior. It doesn't make sense to pass a structure smaller than at least filter_off size, so let's just give -EINVAL in this case. This changes userspace visible behavior, but was only introduced in commit 26500475ac1b ("ptrace, seccomp: add support for retrieving seccomp metadata") in 4.16-rc2, so should be safe to change if merged before then. Reported-by: Eugene Syromiatnikov <[email protected]> Signed-off-by: Tycho Andersen <[email protected]> CC: Kees Cook <[email protected]> CC: Oleg Nesterov <[email protected]> Signed-off-by: Kees Cook <[email protected]>
2018-02-21seccomp, ptrace: switch get_metadata types to arch independentTycho Andersen1-2/+2
Commit 26500475ac1b ("ptrace, seccomp: add support for retrieving seccomp metadata") introduced `struct seccomp_metadata`, which contained unsigned longs that should be arch independent. The type of the flags member was chosen to match the corresponding argument to seccomp(), and so we need something at least as big as unsigned long. My understanding is that __u64 should fit the bill, so let's switch both types to that. While this is userspace facing, it was only introduced in 4.16-rc2, and so should be safe assuming it goes in before then. Reported-by: "Dmitry V. Levin" <[email protected]> Signed-off-by: Tycho Andersen <[email protected]> CC: Kees Cook <[email protected]> CC: Oleg Nesterov <[email protected]> Reviewed-by: "Dmitry V. Levin" <[email protected]> Signed-off-by: Kees Cook <[email protected]>
2018-02-22selftests/bpf: update gitignore with test_libbpf_openAnders Roxell1-0/+1
bpf builds a test program for loading BPF ELF files. Add the executable to the .gitignore list. Signed-off-by: Anders Roxell <[email protected]> Tested-by: Daniel Díaz <[email protected]> Acked-by: David S. Miller <[email protected]> Acked-by: Shuah Khan <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-02-22selftests/bpf: tcpbpf_kern: use in6_* macros from glibcAnders Roxell1-1/+0
Both glibc and the kernel have in6_* macros definitions. Build fails because it picks up wrong in6_* macro from the kernel header and not the header from glibc. Fixes build error below: clang -I. -I./include/uapi -I../../../include/uapi -Wno-compare-distinct-pointer-types \ -O2 -target bpf -emit-llvm -c test_tcpbpf_kern.c -o - | \ llc -march=bpf -mcpu=generic -filetype=obj -o .../tools/testing/selftests/bpf/test_tcpbpf_kern.o In file included from test_tcpbpf_kern.c:12: .../netinet/in.h:101:5: error: expected identifier IPPROTO_HOPOPTS = 0, /* IPv6 Hop-by-Hop options. */ ^ .../linux/in6.h:131:26: note: expanded from macro 'IPPROTO_HOPOPTS' ^ In file included from test_tcpbpf_kern.c:12: /usr/include/netinet/in.h:103:5: error: expected identifier IPPROTO_ROUTING = 43, /* IPv6 routing header. */ ^ .../linux/in6.h:132:26: note: expanded from macro 'IPPROTO_ROUTING' ^ In file included from test_tcpbpf_kern.c:12: .../netinet/in.h:105:5: error: expected identifier IPPROTO_FRAGMENT = 44, /* IPv6 fragmentation header. */ ^ Since both glibc and the kernel have in6_* macros definitions, use the one from glibc. Kernel headers will check for previous libc definitions by including include/linux/libc-compat.h. Reported-by: Daniel Díaz <[email protected]> Signed-off-by: Anders Roxell <[email protected]> Tested-by: Daniel Díaz <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-02-22bpf: clean up unused-variable warningArnd Bergmann1-5/+1
The only user of this variable is inside of an #ifdef, causing a warning without CONFIG_INET: net/core/filter.c: In function '____bpf_sock_ops_cb_flags_set': net/core/filter.c:3382:6: error: unused variable 'val' [-Werror=unused-variable] int val = argval & BPF_SOCK_OPS_ALL_CB_FLAGS; This replaces the #ifdef with a nicer IS_ENABLED() check that makes the code more readable and avoids the warning. Fixes: b13d88072172 ("bpf: Adds field bpf_sock_ops_cb_flags to tcp_sock") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-02-21mm: don't defer struct page initialization for Xen pv guestsJuergen Gross1-0/+4
Commit f7f99100d8d9 ("mm: stop zeroing memory during allocation in vmemmap") broke Xen pv domains in some configurations, as the "Pinned" information in struct page of early page tables could get lost. This will lead to the kernel trying to write directly into the page tables instead of asking the hypervisor to do so. The result is a crash like the following: BUG: unable to handle kernel paging request at ffff8801ead19008 IP: xen_set_pud+0x4e/0xd0 PGD 1c0a067 P4D 1c0a067 PUD 23a0067 PMD 1e9de0067 PTE 80100001ead19065 Oops: 0003 [#1] PREEMPT SMP Modules linked in: CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.14.0-default+ #271 Hardware name: Dell Inc. Latitude E6440/0159N7, BIOS A07 06/26/2014 task: ffffffff81c10480 task.stack: ffffffff81c00000 RIP: e030:xen_set_pud+0x4e/0xd0 Call Trace: __pmd_alloc+0x128/0x140 ioremap_page_range+0x3f4/0x410 __ioremap_caller+0x1c3/0x2e0 acpi_os_map_iomem+0x175/0x1b0 acpi_tb_acquire_table+0x39/0x66 acpi_tb_validate_table+0x44/0x7c acpi_tb_verify_temp_table+0x45/0x304 acpi_reallocate_root_table+0x12d/0x141 acpi_early_init+0x4d/0x10a start_kernel+0x3eb/0x4a1 xen_start_kernel+0x528/0x532 Code: 48 01 e8 48 0f 42 15 a2 fd be 00 48 01 d0 48 ba 00 00 00 00 00 ea ff ff 48 c1 e8 0c 48 c1 e0 06 48 01 d0 48 8b 00 f6 c4 02 75 5d <4c> 89 65 00 5b 5d 41 5c c3 65 8b 05 52 9f fe 7e 89 c0 48 0f a3 RIP: xen_set_pud+0x4e/0xd0 RSP: ffffffff81c03cd8 CR2: ffff8801ead19008 ---[ end trace 38eca2e56f1b642e ]--- Avoid this problem by not deferring struct page initialization when running as Xen pv guest. Pavel said: : This is unique for Xen, so this particular issue won't effect other : configurations. I am going to investigate if there is a way to : re-enable deferred page initialization on xen guests. [[email protected]: explicitly include xen.h] Link: http://lkml.kernel.org/r/[email protected] Fixes: f7f99100d8d95d ("mm: stop zeroing memory during allocation in vmemmap") Signed-off-by: Juergen Gross <[email protected]> Reviewed-by: Pavel Tatashin <[email protected]> Cc: Steven Sistare <[email protected]> Cc: Daniel Jordan <[email protected]> Cc: Bob Picco <[email protected]> Cc: <[email protected]> [4.15.x] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-02-21lib/Kconfig.debug: enable RUNTIME_TESTING_MENUAnders Roxell1-0/+1
Commit d3deafaa8b5c ("lib/: make RUNTIME_TESTS a menuconfig to ease disabling it all") causes a regression when using runtime tests due to it defaults RUNTIME_TESTING_MENU to not set. Link: http://lkml.kernel.org/r/[email protected] Fixes: d3deafaa8b5c ("lib/: make RUNTIME_TESTS a menuconfig to easedisabling it all") Signed-off-by: Anders Roxell <[email protected]> Cc: Vincent Legoll <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Byungchul Park <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-02-21vmalloc: fix __GFP_HIGHMEM usage for vmalloc_32 on 32b systemsMichal Hocko1-3/+7
Kai Heng Feng has noticed that BUG_ON(PageHighMem(pg)) triggers in drivers/media/common/saa7146/saa7146_core.c since 19809c2da28a ("mm, vmalloc: use __GFP_HIGHMEM implicitly"). saa7146_vmalloc_build_pgtable uses vmalloc_32 and it is reasonable to expect that the resulting page is not in highmem. The above commit aimed to add __GFP_HIGHMEM only for those requests which do not specify any zone modifier gfp flag. vmalloc_32 relies on GFP_VMALLOC32 which should do the right thing. Except it has been missed that GFP_VMALLOC32 is an alias for GFP_KERNEL on 32b architectures. Thanks to Matthew to notice this. Fix the problem by unconditionally setting GFP_DMA32 in GFP_VMALLOC32 for !64b arches (as a bailout). This should do the right thing and use ZONE_NORMAL which should be always below 4G on 32b systems. Debugged by Matthew Wilcox. [[email protected]: coding-style fixes] Link: http://lkml.kernel.org/r/[email protected] Fixes: 19809c2da28a ("mm, vmalloc: use __GFP_HIGHMEM implicitly”) Signed-off-by: Michal Hocko <[email protected]> Reported-by: Kai Heng Feng <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: Laura Abbott <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.