aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-03-11staging: wfx: make warning about pending frame less scaryJérôme Pouiller1-1/+3
Removing station while some traffic is in progress may happen. Signed-off-by: Jérôme Pouiller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-11staging: wfx: fix lines ending with a comma instead of a semicolonJérôme Pouiller1-3/+3
Obviously introduced by mistake. Fixes: 09779276f1ba ("staging: wfx: simplify hif_start() usage") Signed-off-by: Jérôme Pouiller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-11staging: wfx: fix warning about freeing in-use mutex during device unregisterJérôme Pouiller1-0/+1
After hif_shutdown(), communication with the chip is no more possible. It the only request that never reply. Therefore, hif_cmd.lock is never unlocked. hif_shutdown() unlock itself hif_cmd.lock to avoid a potential warning during disposal of device. hif_cmd.key_renew_lock should also been unlocked for the same reason. Signed-off-by: Jérôme Pouiller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-11staging/speakup: fix get_word non-space look-aheadSamuel Thibault1-1/+1
get_char was erroneously given the address of the pointer to the text instead of the address of the text, thus leading to random crashes when the user requests speaking a word while the current position is on a space character and say_word_ctl is not enabled. Reported-on: https://github.com/bytefire/speakup/issues/1 Reported-by: Kirk Reiser <[email protected]> Reported-by: Janina Sajka <[email protected]> Reported-by: Alexandr Epaneshnikov <[email protected]> Reported-by: Gregory Nowak <[email protected]> Reported-by: deedra waters <[email protected]> Signed-off-by: Samuel Thibault <[email protected]> Tested-by: Alexandr Epaneshnikov <[email protected]> Tested-by: Gregory Nowak <[email protected]> Tested-by: Michael Taboada <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/20200306003047.thijtmqrnayd3dmw@function Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-11ALSA: hda/realtek: Fix pop noise on ALC225Kai-Heng Feng1-0/+2
Commit 317d9313925c ("ALSA: hda/realtek - Set default power save node to 0") makes the ALC225 have pop noise on S3 resume and cold boot. So partially revert this commit for ALC225 to fix the regression. Fixes: 317d9313925c ("ALSA: hda/realtek - Set default power save node to 0") BugLink: https://bugs.launchpad.net/bugs/1866357 Signed-off-by: Kai-Heng Feng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-03-10scsi: ipr: Fix softlockup when rescanning devices in petitbootWen Xiong2-1/+3
When trying to rescan disks in petitboot shell, we hit the following softlockup stacktrace: Kernel panic - not syncing: System is deadlocked on memory [ 241.223394] CPU: 32 PID: 693 Comm: sh Not tainted 5.4.16-openpower1 #1 [ 241.223406] Call Trace: [ 241.223415] [c0000003f07c3180] [c000000000493fc4] dump_stack+0xa4/0xd8 (unreliable) [ 241.223432] [c0000003f07c31c0] [c00000000007d4ac] panic+0x148/0x3cc [ 241.223446] [c0000003f07c3260] [c000000000114b10] out_of_memory+0x468/0x4c4 [ 241.223461] [c0000003f07c3300] [c0000000001472b0] __alloc_pages_slowpath+0x594/0x6d8 [ 241.223476] [c0000003f07c3420] [c00000000014757c] __alloc_pages_nodemask+0x188/0x1a4 [ 241.223492] [c0000003f07c34a0] [c000000000153e10] alloc_pages_current+0xcc/0xd8 [ 241.223508] [c0000003f07c34e0] [c0000000001577ac] alloc_slab_page+0x30/0x98 [ 241.223524] [c0000003f07c3520] [c0000000001597fc] new_slab+0x138/0x40c [ 241.223538] [c0000003f07c35f0] [c00000000015b204] ___slab_alloc+0x1e4/0x404 [ 241.223552] [c0000003f07c36c0] [c00000000015b450] __slab_alloc+0x2c/0x48 [ 241.223566] [c0000003f07c36f0] [c00000000015b754] kmem_cache_alloc_node+0x9c/0x1b4 [ 241.223582] [c0000003f07c3760] [c000000000218c48] blk_alloc_queue_node+0x34/0x270 [ 241.223599] [c0000003f07c37b0] [c000000000226574] blk_mq_init_queue+0x2c/0x78 [ 241.223615] [c0000003f07c37e0] [c0000000002ff710] scsi_mq_alloc_queue+0x28/0x70 [ 241.223631] [c0000003f07c3810] [c0000000003005b8] scsi_alloc_sdev+0x184/0x264 [ 241.223647] [c0000003f07c38a0] [c000000000300ba0] scsi_probe_and_add_lun+0x288/0xa3c [ 241.223663] [c0000003f07c3a00] [c000000000301768] __scsi_scan_target+0xcc/0x478 [ 241.223679] [c0000003f07c3b20] [c000000000301c64] scsi_scan_channel.part.9+0x74/0x7c [ 241.223696] [c0000003f07c3b70] [c000000000301df4] scsi_scan_host_selected+0xe0/0x158 [ 241.223712] [c0000003f07c3bd0] [c000000000303f04] store_scan+0x104/0x114 [ 241.223727] [c0000003f07c3cb0] [c0000000002d5ac4] dev_attr_store+0x30/0x4c [ 241.223741] [c0000003f07c3cd0] [c0000000001dbc34] sysfs_kf_write+0x64/0x78 [ 241.223756] [c0000003f07c3cf0] [c0000000001da858] kernfs_fop_write+0x170/0x1b8 [ 241.223773] [c0000003f07c3d40] [c0000000001621fc] __vfs_write+0x34/0x60 [ 241.223787] [c0000003f07c3d60] [c000000000163c2c] vfs_write+0xa8/0xcc [ 241.223802] [c0000003f07c3db0] [c000000000163df4] ksys_write+0x70/0xbc [ 241.223816] [c0000003f07c3e20] [c00000000000b40c] system_call+0x5c/0x68 As a part of the scan process Linux will allocate and configure a scsi_device for each target to be scanned. If the device is not present, then the scsi_device is torn down. As a part of scsi_device teardown a workqueue item will be scheduled and the lockups we see are because there are 250k workqueue items to be processed. Accoding to the specification of SIS-64 sas controller, max_channel should be decreased on SIS-64 adapters to 4. The patch fixes softlockup issue. Thanks for Oliver Halloran's help with debugging and explanation! Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Wen Xiong <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-03-10Merge branch 's390-qeth-fixes'David S. Miller3-6/+11
Julian Wiedmann says: ==================== s390/qeth: fixes 2020-03-10 This fixes three minor issues: 1) a setup parameter gets cleared unnecessarily when the HW config changes, 2) insufficient error handling when initially filling the RX ring, and 3) a rarely used worker that needs to be cancelled during tear down. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-03-10s390/qeth: cancel RX reclaim work earlierJulian Wiedmann3-1/+2
When qeth's napi poll code fails to refill an entirely empty RX ring, it kicks off buffer_reclaim_work to try again later. Make sure that this worker is cancelled when setting the qeth device offline. Otherwise a RX refill action can unexpectedly end up running concurrently to bigger re-configurations (eg. resizing the buffer pool), without any locking. Fixes: b333293058aa ("qeth: add support for af_iucv HiperSockets transport") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-10s390/qeth: handle error when backing RX bufferJulian Wiedmann1-4/+9
qeth_init_qdio_queues() fills the RX ring with an initial set of RX buffers. If qeth_init_input_buffer() fails to back one of the RX buffers with memory, we need to bail out and report the error. Fixes: 4a71df50047f ("qeth: new qeth device driver") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-10s390/qeth: don't reset default_out_queueJulian Wiedmann1-1/+0
When an OSA device in prio-queue setup is reduced to 1 TX queue due to HW restrictions, we reset its the default_out_queue to 0. In the old code this was needed so that qeth_get_priority_queue() gets the queue selection right. But with proper multiqueue support we already reduced dev->real_num_tx_queues to 1, and so the stack puts all traffic on txq 0 without even calling .ndo_select_queue. Thus we can preserve the user's configuration, and apply it if the OSA device later re-gains support for multiple TX queues. Fixes: 73dc2daf110f ("s390/qeth: add TX multiqueue support for OSA devices") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-10scsi: ufs: Fix possible unclocked access to auto hibern8 timer registerCan Guo1-7/+14
Before access auto hibner8 timer register, make sure power and clock are properly configured to avoid unclocked register access. Link: https://lore.kernel.org/r/[email protected] Fixes: ba7af5ec5126 ("scsi: ufs: export ufshcd_auto_hibern8_update for vendor usage") Reviewed-by: Stanley Chu <[email protected]> Signed-off-by: Can Guo <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2020-03-10Merge branch 'MACSec-bugfixes-related-to-MAC-address-change'David S. Miller1-5/+19
Igor Russkikh says: ==================== MACSec bugfixes related to MAC address change We found out that there's an issue in MACSec code when the MAC address is changed. Both s/w and offloaded implementations don't update SCI when the MAC address changes at the moment, but they should do so, because SCI contains MAC in its first 6 octets. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-03-10net: macsec: invoke mdo_upd_secy callback when mac address changedDmitry Bogdanov1-0/+13
Notify the offload engine about MAC address change to reconfigure it accordingly. Fixes: 3cf3227a21d1 ("net: macsec: hardware offloading infrastructure") Signed-off-by: Dmitry Bogdanov <[email protected]> Signed-off-by: Mark Starovoytov <[email protected]> Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-10net: macsec: update SCI upon MAC address change.Dmitry Bogdanov1-5/+6
SCI should be updated, because it contains MAC in its first 6 octets. Fixes: c09440f7dcb3 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Dmitry Bogdanov <[email protected]> Signed-off-by: Mark Starovoytov <[email protected]> Signed-off-by: Igor Russkikh <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-10ibmvnic: Do not process device remove during device resetJuliet Kim2-3/+27
The ibmvnic driver does not check the device state when the device is removed. If the device is removed while a device reset is being processed, the remove may free structures needed by the reset, causing an oops. Fix this by checking the device state before processing device remove. Signed-off-by: Juliet Kim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-10net/smc: cancel event worker during device removalKarsten Graul1-0/+1
During IB device removal, cancel the event worker before the device structure is freed. Fixes: a4cf0443c414 ("smc: introduce SMC as an IB-client") Reported-by: [email protected] Signed-off-by: Karsten Graul <[email protected]> Reviewed-by: Ursula Braun <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-10ipv6/addrconf: call ipv6_mc_up() for non-Ethernet interfaceHangbin Liu1-0/+4
Rafał found an issue that for non-Ethernet interface, if we down and up frequently, the memory will be consumed slowly. The reason is we add allnodes/allrouters addressed in multicast list in ipv6_add_dev(). When link down, we call ipv6_mc_down(), store all multicast addresses via mld_add_delrec(). But when link up, we don't call ipv6_mc_up() for non-Ethernet interface to remove the addresses. This makes idev->mc_tomb getting bigger and bigger. The call stack looks like: addrconf_notify(NETDEV_REGISTER) ipv6_add_dev ipv6_dev_mc_inc(ff01::1) ipv6_dev_mc_inc(ff02::1) ipv6_dev_mc_inc(ff02::2) addrconf_notify(NETDEV_UP) addrconf_dev_config /* Alas, we support only Ethernet autoconfiguration. */ return; addrconf_notify(NETDEV_DOWN) addrconf_ifdown ipv6_mc_down igmp6_group_dropped(ff02::2) mld_add_delrec(ff02::2) igmp6_group_dropped(ff02::1) igmp6_group_dropped(ff01::1) After investigating, I can't found a rule to disable multicast on non-Ethernet interface. In RFC2460, the link could be Ethernet, PPP, ATM, tunnels, etc. In IPv4, it doesn't check the dev type when calls ip_mc_up() in inetdev_event(). Even for IPv6, we don't check the dev type and call ipv6_add_dev(), ipv6_dev_mc_inc() after register device. So I think it's OK to fix this memory consumer by calling ipv6_mc_up() for non-Ethernet interface. v2: Also check IFF_MULTICAST flag to make sure the interface supports multicast Reported-by: Rafał Miłecki <[email protected]> Tested-by: Rafał Miłecki <[email protected]> Fixes: 74235a25c673 ("[IPV6] addrconf: Fix IPv6 on tuntap tunnels") Fixes: 1666d49e1d41 ("mld: do not remove mld souce list info when set link down") Signed-off-by: Hangbin Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-10Merge tag 'clang-format-for-linus-v5.6-rc6' of git://github.com/ojeda/linuxLinus Torvalds1-4/+21
Pull clang-format update from Miguel Ojeda: "Another update for the .clang-format macro list It has been a while since the last time I sent one!" * tag 'clang-format-for-linus-v5.6-rc6' of git://github.com/ojeda/linux: clang-format: Update with the latest for_each macro list
2020-03-10net: memcg: late association of sock to memcgShakeel Butt3-15/+24
If a TCP socket is allocated in IRQ context or cloned from unassociated (i.e. not associated to a memcg) in IRQ context then it will remain unassociated for its whole life. Almost half of the TCPs created on the system are created in IRQ context, so, memory used by such sockets will not be accounted by the memcg. This issue is more widespread in cgroup v1 where network memory accounting is opt-in but it can happen in cgroup v2 if the source socket for the cloning was created in root memcg. To fix the issue, just do the association of the sockets at the accept() time in the process context and then force charge the memory buffer already used and reserved by the socket. Signed-off-by: Shakeel Butt <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-10cgroup: memcg: net: do not associate sock with unrelated cgroupShakeel Butt2-0/+8
We are testing network memory accounting in our setup and noticed inconsistent network memory usage and often unrelated cgroups network usage correlates with testing workload. On further inspection, it seems like mem_cgroup_sk_alloc() and cgroup_sk_alloc() are broken in irq context specially for cgroup v1. mem_cgroup_sk_alloc() and cgroup_sk_alloc() can be called in irq context and kind of assumes that this can only happen from sk_clone_lock() and the source sock object has already associated cgroup. However in cgroup v1, where network memory accounting is opt-in, the source sock can be unassociated with any cgroup and the new cloned sock can get associated with unrelated interrupted cgroup. Cgroup v2 can also suffer if the source sock object was created by process in the root cgroup or if sk_alloc() is called in irq context. The fix is to just do nothing in interrupt. WARNING: Please note that about half of the TCP sockets are allocated from the IRQ context, so, memory used by such sockets will not be accouted by the memcg. The stack trace of mem_cgroup_sk_alloc() from IRQ-context: CPU: 70 PID: 12720 Comm: ssh Tainted: 5.6.0-smp-DEV #1 Hardware name: ... Call Trace: <IRQ> dump_stack+0x57/0x75 mem_cgroup_sk_alloc+0xe9/0xf0 sk_clone_lock+0x2a7/0x420 inet_csk_clone_lock+0x1b/0x110 tcp_create_openreq_child+0x23/0x3b0 tcp_v6_syn_recv_sock+0x88/0x730 tcp_check_req+0x429/0x560 tcp_v6_rcv+0x72d/0xa40 ip6_protocol_deliver_rcu+0xc9/0x400 ip6_input+0x44/0xd0 ? ip6_protocol_deliver_rcu+0x400/0x400 ip6_rcv_finish+0x71/0x80 ipv6_rcv+0x5b/0xe0 ? ip6_sublist_rcv+0x2e0/0x2e0 process_backlog+0x108/0x1e0 net_rx_action+0x26b/0x460 __do_softirq+0x104/0x2a6 do_softirq_own_stack+0x2a/0x40 </IRQ> do_softirq.part.19+0x40/0x50 __local_bh_enable_ip+0x51/0x60 ip6_finish_output2+0x23d/0x520 ? ip6table_mangle_hook+0x55/0x160 __ip6_finish_output+0xa1/0x100 ip6_finish_output+0x30/0xd0 ip6_output+0x73/0x120 ? __ip6_finish_output+0x100/0x100 ip6_xmit+0x2e3/0x600 ? ipv6_anycast_cleanup+0x50/0x50 ? inet6_csk_route_socket+0x136/0x1e0 ? skb_free_head+0x1e/0x30 inet6_csk_xmit+0x95/0xf0 __tcp_transmit_skb+0x5b4/0xb20 __tcp_send_ack.part.60+0xa3/0x110 tcp_send_ack+0x1d/0x20 tcp_rcv_state_process+0xe64/0xe80 ? tcp_v6_connect+0x5d1/0x5f0 tcp_v6_do_rcv+0x1b1/0x3f0 ? tcp_v6_do_rcv+0x1b1/0x3f0 __release_sock+0x7f/0xd0 release_sock+0x30/0xa0 __inet_stream_connect+0x1c3/0x3b0 ? prepare_to_wait+0xb0/0xb0 inet_stream_connect+0x3b/0x60 __sys_connect+0x101/0x120 ? __sys_getsockopt+0x11b/0x140 __x64_sys_connect+0x1a/0x20 do_syscall_64+0x51/0x200 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The stack trace of mem_cgroup_sk_alloc() from IRQ-context: Fixes: 2d7580738345 ("mm: memcontrol: consolidate cgroup socket tracking") Fixes: d979a39d7242 ("cgroup: duplicate cgroup reference when cloning sockets") Signed-off-by: Shakeel Butt <[email protected]> Reviewed-by: Roman Gushchin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-10Merge tag 'auxdisplay-for-linus-v5.6-rc6' of git://github.com/ojeda/linuxLinus Torvalds3-12/+10
Pull auxdisplay updates from Miguel Ojeda: "A few minor auxdisplay improvements: - charlcd: replace zero-length array with flexible-array member (kernel-wide cleanup by Gustavo A. R. Silva) - img-ascii-lcd: convert to devm_platform_ioremap_resource (Yangtao Li) - Fix Kconfig indentation (Krzysztof Kozlowski) * tag 'auxdisplay-for-linus-v5.6-rc6' of git://github.com/ojeda/linux: auxdisplay: charlcd: replace zero-length array with flexible-array member auxdisplay: img-ascii-lcd: convert to devm_platform_ioremap_resource auxdisplay: Fix Kconfig indentation
2020-03-10MAINTAINERS: update cxgb4vf maintainer to VishalJakub Kicinski1-1/+1
Casey Leedomn <[email protected]> is bouncing, Vishal indicated he's happy to take the role. Signed-off-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-10Merge branch 'for-5.6-fixes' of ↵Linus Torvalds3-14/+29
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: - cgroup.procs listing related fixes. It didn't interlock properly with exiting tasks leaving a short window where a cgroup has empty cgroup.procs but still can't be removed and misbehaved on short reads. - psi_show() crash fix on 32bit ino archs - Empty release_agent handling fix * 'for-5.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup1: don't call release_agent when it is "" cgroup: fix psi_show() crash on 32bit ino archs cgroup: Iterate tasks that did not finish do_exit() cgroup: cgroup_procs_next should increase position index cgroup-v1: cgroup_pidlist_next should update position index
2020-03-10Merge branch 'for-5.6-fixes' of ↵Linus Torvalds2-6/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fixes from Tejun Heo: "Workqueue has been incorrectly round-robining per-cpu work items. Hillf's patch fixes that. The other patch documents memory-ordering properties of workqueue operations" * 'for-5.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: don't use wq_select_unbound_cpu() for bound works workqueue: Document (some) memory-ordering properties of {queue,schedule}_work()
2020-03-10drm/amdgpu/powerplay: nv1x, renior copy dcn clock settings of watermark to ↵Hersen Wu3-13/+21
smu during boot up dc to pplib interface is changed for navi1x, renoir. display_config_changed is not called by dc anymore. smu_write_watermarks_table is not executed for navi1x, renoir during boot up. solution: call smu_write_watermarks_table just after dc pass watermark clock settings to pplib Signed-off-by: Hersen Wu <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-03-10nvme-rdma: Avoid double freeing of async event dataPrabhath Sajeepa1-3/+5
The timeout of identify cmd, which is invoked as part of admin queue creation, can result in freeing of async event data both in nvme_rdma_timeout handler and error handling path of nvme_rdma_configure_admin queue thus causing NULL pointer reference. Call Trace: ? nvme_rdma_setup_ctrl+0x223/0x800 [nvme_rdma] nvme_rdma_create_ctrl+0x2ba/0x3f7 [nvme_rdma] nvmf_dev_write+0xa54/0xcc6 [nvme_fabrics] __vfs_write+0x1b/0x40 vfs_write+0xb2/0x1b0 ksys_write+0x61/0xd0 __x64_sys_write+0x1a/0x20 do_syscall_64+0x60/0x1e0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reviewed-by: Roland Dreier <[email protected]> Reviewed-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Prabhath Sajeepa <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2020-03-10blk-iocost: fix incorrect vtime comparison in iocg_is_idle()Tejun Heo1-1/+1
vtimes may wrap and time_before/after64() should be used to determine whether a given vtime is before or after another. iocg_is_idle() was incorrectly using plain "<" comparison do determine whether done_vtime is before vtime. Here, the only thing we're interested in is whether done_vtime matches vtime which indicates that there's nothing in flight. Let's test for inequality instead. Signed-off-by: Tejun Heo <[email protected]> Fixes: 7caa47151ab2 ("blkcg: implement blk-iocost") Cc: [email protected] # v5.4+ Signed-off-by: Jens Axboe <[email protected]>
2020-03-10usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145cAlberto Mattea1-1/+2
This controller timeouts during suspend (S3) with [ 240.521724] xhci_hcd 0000:30:00.3: WARN: xHC save state timeout [ 240.521729] xhci_hcd 0000:30:00.3: ERROR mismatched command completion event thus preventing the system from entering S3. Moreover it remains in an undefined state where some connected devices stop working until a reboot. Apply the XHCI_SUSPEND_DELAY quirk to make it suspend properly. CC: [email protected] Signed-off-by: Alberto Mattea <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-10xhci: Do not open code __print_symbolic() in xhci trace eventsSteven Rostedt (VMware)1-17/+6
libtraceevent (used by perf and trace-cmd) failed to parse the xhci_urb_dequeue trace event. This is because the user space trace event format parsing is not a full C compiler. It can handle some basic logic, but is not meant to be able to handle everything C can do. In cases where a trace event field needs to be converted from a number to a string, there's the __print_symbolic() macro that should be used: See samples/trace_events/trace-events-sample.h Some xhci trace events open coded the __print_symbolic() causing the user spaces tools to fail to parse it. This has to be replaced with __print_symbolic() instead. CC: [email protected] Reported-by: Tzvetomir Stoyanov <[email protected]> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=206531 Fixes: 5abdc2e6e12ff ("usb: host: xhci: add urb_enqueue/dequeue/giveback tracers") Signed-off-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Mathias Nyman <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-03-10Merge tag 'thunderbolt-fix-for-v5.6-rc6' of ↵Greg Kroah-Hartman1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt into usb-linus Mika writes: thunderbolt: Fix for v5.6-rc6 This includes a single commit that fixes incorrect return value from tb_port_is_width_supported() if the read fails. * tag 'thunderbolt-fix-for-v5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt: thunderbolt: Fix error code in tb_port_is_width_supported()
2020-03-10workqueue: don't use wq_select_unbound_cpu() for bound worksHillf Danton1-6/+8
wq_select_unbound_cpu() is designed for unbound workqueues only, but it's wrongly called when using a bound workqueue too. Fixing this ensures work queued to a bound workqueue with cpu=WORK_CPU_UNBOUND always runs on the local CPU. Before, that would happen only if wq_unbound_cpumask happened to include it (likely almost always the case), or was empty, or we got lucky with forced round-robin placement. So restricting /sys/devices/virtual/workqueue/cpumask to a small subset of a machine's CPUs would cause some bound work items to run unexpectedly there. Fixes: ef557180447f ("workqueue: schedule WORK_CPU_UNBOUND work on wq_unbound_cpumask CPUs") Cc: [email protected] # v4.5+ Signed-off-by: Hillf Danton <[email protected]> [dj: massage changelog] Signed-off-by: Daniel Jordan <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Lai Jiangshan <[email protected]> Cc: [email protected] Signed-off-by: Tejun Heo <[email protected]>
2020-03-10i2c: gpio: suppress error on probe deferHamish Martin1-1/+1
If a GPIO we are trying to use is not available and we are deferring the probe, don't output an error message. This seems to have been the intent of commit 05c74778858d ("i2c: gpio: Add support for named gpios in DT") but the error was still output due to not checking the updated 'retdesc'. Fixes: 05c74778858d ("i2c: gpio: Add support for named gpios in DT") Signed-off-by: Hamish Martin <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-03-10macintosh: windfarm: fix MODINFO regressionWolfram Sang6-1/+50
Commit af503716ac14 made sure OF devices get an OF style modalias with I2C events. It assumed all in-tree users were converted, yet it missed some Macintosh drivers. Add an OF module device table for all windfarm drivers to make them automatically load again. Fixes: af503716ac14 ("i2c: core: report OF style module alias for devices registered via OF") Link: https://bugzilla.kernel.org/show_bug.cgi?id=199471 Reported-by: Erhard Furtner <[email protected]> Tested-by: Erhard Furtner <[email protected]> Acked-by: Michael Ellerman <[email protected]> (powerpc) Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected] # v4.17+
2020-03-10i2c: designware-pci: Fix BUG_ON during device removalJarkko Nikula1-0/+1
Function i2c_dw_pci_remove() -> pci_free_irq_vectors() -> pci_disable_msi() -> free_msi_irqs() will throw a BUG_ON() for MSI enabled device since the driver has not released the requested IRQ before calling the pci_free_irq_vectors(). Here driver requests an IRQ using devm_request_irq() but automatic release happens only after remove callback. Fix this by explicitly freeing the IRQ before calling pci_free_irq_vectors(). Fixes: 21aa3983d619 ("i2c: designware-pci: Switch over to MSI interrupts") Cc: [email protected] # v5.4+ Signed-off-by: Jarkko Nikula <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-03-10iommu/vt-d: Silence RCU-list debugging warningsQian Cai2-3/+6
Similar to the commit 02d715b4a818 ("iommu/vt-d: Fix RCU list debugging warnings"), there are several other places that call list_for_each_entry_rcu() outside of an RCU read side critical section but with dmar_global_lock held. Silence those false positives as well. drivers/iommu/intel-iommu.c:4288 RCU-list traversed in non-reader section!! 1 lock held by swapper/0/1: #0: ffffffff935892c8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x1ad/0xb97 drivers/iommu/dmar.c:366 RCU-list traversed in non-reader section!! 1 lock held by swapper/0/1: #0: ffffffff935892c8 (dmar_global_lock){+.+.}, at: intel_iommu_init+0x125/0xb97 drivers/iommu/intel-iommu.c:5057 RCU-list traversed in non-reader section!! 1 lock held by swapper/0/1: #0: ffffffffa71892c8 (dmar_global_lock){++++}, at: intel_iommu_init+0x61a/0xb13 Signed-off-by: Qian Cai <[email protected]> Acked-by: Lu Baolu <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2020-03-10iommu/vt-d: Fix RCU-list bugs in intel_iommu_init()Qian Cai1-1/+4
There are several places traverse RCU-list without holding any lock in intel_iommu_init(). Fix them by acquiring dmar_global_lock. WARNING: suspicious RCU usage ----------------------------- drivers/iommu/intel-iommu.c:5216 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 no locks held by swapper/0/1. Call Trace: dump_stack+0xa0/0xea lockdep_rcu_suspicious+0x102/0x10b intel_iommu_init+0x947/0xb13 pci_iommu_init+0x26/0x62 do_one_initcall+0xfe/0x500 kernel_init_freeable+0x45a/0x4f8 kernel_init+0x11/0x139 ret_from_fork+0x3a/0x50 DMAR: Intel(R) Virtualization Technology for Directed I/O Fixes: d8190dc63886 ("iommu/vt-d: Enable DMA remapping after rmrr mapped") Signed-off-by: Qian Cai <[email protected]> Acked-by: Lu Baolu <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2020-03-10i2c: i801: Do not add ICH_RES_IO_SMI for the iTCO_wdt deviceMika Westerberg1-33/+12
Martin noticed that nct6775 driver does not load properly on his system in v5.4+ kernels. The issue was bisected to commit b84398d6d7f9 ("i2c: i801: Use iTCO version 6 in Cannon Lake PCH and beyond") but it is likely not the culprit because the faulty code has been in the driver already since commit 9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs"). So more likely some commit that added PCI IDs of recent chipsets made the driver to create the iTCO_wdt device on Martins system. The issue was debugged to be PCI configuration access to the PMC device that is not present. This returns all 1's when read and this caused the iTCO_wdt driver to accidentally request resourses used by nct6775. It turns out that the SMI resource is only required for some ancient systems, not the ones supported by this driver. For this reason do not populate the SMI resource at all and drop all the related code. The driver now always populates the main I/O resource and only in case of SPT (Intel Sunrisepoint) compatible devices it adds another resource for the NO_REBOOT bit. These two resources are of different types so platform_get_resource() used by the iTCO_wdt driver continues to find the both resources at index 0. Link: https://lore.kernel.org/linux-hwmon/CAM1AHpQ4196tyD=HhBu-2donSsuogabkfP03v1YF26Q7_BgvgA@mail.gmail.com/ Fixes: 9424693035a5 ("i2c: i801: Create iTCO device on newer Intel PCHs") [wsa: complete fix needs all of http://patchwork.ozlabs.org/project/linux-i2c/list/?series=160959&state=*] Reported-by: Martin Volf <[email protected]> Signed-off-by: Mika Westerberg <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-03-10watchdog: iTCO_wdt: Make ICH_RES_IO_SMI optionalMika Westerberg1-12/+16
The iTCO_wdt driver only needs ICH_RES_IO_SMI I/O resource when either turn_SMI_watchdog_clear_off module parameter is set to match ->iTCO_version (or higher), and when legacy iTCO_vendorsupport is set. Modify the driver so that ICH_RES_IO_SMI is optional if the two conditions are not met. Signed-off-by: Mika Westerberg <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-03-10watchdog: iTCO_wdt: Export vendorsupportMika Westerberg2-7/+11
In preparation for making ->smi_res optional the iTCO_wdt driver needs to know whether vendorsupport is being set to non-zero. For this reason export the variable. Signed-off-by: Mika Westerberg <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-03-10Merge tag 'gvt-fixes-2020-03-10' of https://github.com/intel/gvt-linux into ↵Jani Nikula2-6/+11
drm-intel-fixes gvt-fixes-2020-03-10 - Fix vgpu idr destroy causing timer destroy failure (Zhenyu) - Fix VBT size (Tina) Signed-off-by: Jani Nikula <[email protected]> From: Zhenyu Wang <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-03-10Merge tag 'linux-cpupower-5.6-rc6' of ↵Rafael J. Wysocki4-3/+5
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux Pull cpupower utility fix for v5.6 from Shuah Khan: "This cpupower update for Linux 5.6-rc6 consists of a fix from Mike Gilbert for build failures when -fno-common is enabled. -fno-common will be default in gcc v10." * tag 'linux-cpupower-5.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux: cpupower: avoid multiple definition with gcc -fno-common
2020-03-10drm/exynos: Fix cleanup of IOMMU related objectsMarek Szyprowski11-29/+53
Store the IOMMU mapping created by the device core of each Exynos DRM sub-device and restore it when the Exynos DRM driver is unbound. This fixes IOMMU initialization failure for the second time when a deferred probe is triggered from the bind() callback of master's compound DRM driver. This also fixes the following issue found using kmemleak detector: unreferenced object 0xc2137640 (size 64): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 50 a3 14 c2 80 a2 14 c2 01 00 00 00 20 00 00 00 P........... ... 00 10 00 00 00 80 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 [<8cd12507>] 0x0 unreferenced object 0xc214a280 (size 128): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 00 a0 ec ed 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 [<8cd12507>] 0x0 unreferenced object 0xedeca000 (size 4096): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 [<8cd12507>] 0x0 unreferenced object 0xc214a300 (size 128): comm "swapper/0", pid 1, jiffies 4294937900 (age 3127.400s) hex dump (first 32 bytes): 00 a3 14 c2 00 a3 14 c2 00 40 18 c2 00 80 18 c2 .........@...... 02 00 02 00 ad 4e ad de ff ff ff ff ff ff ff ff .....N.......... backtrace: [<08cbd8bc>] iommu_domain_alloc+0x24/0x50 [<b835abee>] arm_iommu_create_mapping+0xe4/0x134 [<3acd268d>] arch_setup_dma_ops+0x4c/0x104 [<9f7d2cce>] of_dma_configure+0x19c/0x3a4 [<ba07704b>] really_probe+0xb0/0x47c [<4f510e4f>] driver_probe_device+0x78/0x1c4 [<7481a0cf>] device_driver_attach+0x58/0x60 [<0ff8f5c1>] __driver_attach+0xb8/0x158 [<86006144>] bus_for_each_dev+0x74/0xb4 [<10159dca>] bus_add_driver+0x1c0/0x200 [<8a265265>] driver_register+0x74/0x108 [<e0f3451a>] exynos_drm_init+0xb0/0x134 [<db3fc7ba>] do_one_initcall+0x90/0x458 [<6da35917>] kernel_init_freeable+0x188/0x200 [<db3f74d4>] kernel_init+0x8/0x110 [<1f3cddf9>] ret_from_fork+0x14/0x20 Signed-off-by: Marek Szyprowski <[email protected]> Reviewed-by: Lukasz Luba <[email protected]> Signed-off-by: Inki Dae <[email protected]>
2020-03-09Merge tag 'batadv-net-for-davem-20200306' of git://git.open-mesh.org/linux-mergeDavid S. Miller1-0/+4
Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - Don't schedule OGM for disabled interface, by Sven Eckelmann ==================== Signed-off-by: David S. Miller <[email protected]>
2020-03-09net: mscc: ocelot: properly account for VLAN header length when setting MRUVladimir Oltean2-12/+18
What the driver writes into MAC_MAXLEN_CFG does not actually represent VLAN_ETH_FRAME_LEN but instead ETH_FRAME_LEN + ETH_FCS_LEN. Yes they are numerically equal, but the difference is important, as the switch treats VLAN-tagged traffic specially and knows to increase the maximum accepted frame size automatically. So it is always wrong to account for VLAN in the MAC_MAXLEN_CFG register. Unconditionally increase the maximum allowed frame size for double-tagged traffic. Accounting for the additional length does not mean that the other VLAN membership checks aren't performed, so there's no harm done. Also, stop abusing the MTU name for configuring the MRU. There is no support for configuring the MRU on an interface at the moment. Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support") Fixes: fa914e9c4d94 ("net: mscc: ocelot: create a helper for changing the port MTU") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-09ipvlan: do not use cond_resched_rcu() in ipvlan_process_multicast()Eric Dumazet1-1/+1
Commit e18b353f102e ("ipvlan: add cond_resched_rcu() while processing muticast backlog") added a cond_resched_rcu() in a loop using rcu protection to iterate over slaves. This is breaking rcu rules, so lets instead use cond_resched() at a point we can reschedule Fixes: e18b353f102e ("ipvlan: add cond_resched_rcu() while processing muticast backlog") Signed-off-by: Eric Dumazet <[email protected]> Cc: Mahesh Bandewar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-09cgroup, netclassid: periodically release file_lock on classid updatingDmitry Yakunin1-10/+37
In our production environment we have faced with problem that updating classid in cgroup with heavy tasks cause long freeze of the file tables in this tasks. By heavy tasks we understand tasks with many threads and opened sockets (e.g. balancers). This freeze leads to an increase number of client timeouts. This patch implements following logic to fix this issue: аfter iterating 1000 file descriptors file table lock will be released thus providing a time gap for socket creation/deletion. Now update is non atomic and socket may be skipped using calls: dup2(oldfd, newfd); close(oldfd); But this case is not typical. Moreover before this patch skip is possible too by hiding socket fd in unix socket buffer. New sockets will be allocated with updated classid because cgroup state is updated before start of the file descriptors iteration. So in common cases this patch has no side effects. Signed-off-by: Dmitry Yakunin <[email protected]> Reviewed-by: Konstantin Khlebnikov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-09macvlan: add cond_resched() during multicast processingMahesh Bandewar1-0/+2
The Rx bound multicast packets are deferred to a workqueue and macvlan can also suffer from the same attack that was discovered by Syzbot for IPvlan. This solution is not as effective as in IPvlan. IPvlan defers all (Tx and Rx) multicast packet processing to a workqueue while macvlan does this way only for the Rx. This fix should address the Rx codition to certain extent. Tx is still suseptible. Tx multicast processing happens when .ndo_start_xmit is called, hence we cannot add cond_resched(). However, it's not that severe since the user which is generating / flooding will be affected the most. Fixes: 412ca1550cbe ("macvlan: Move broadcasts into a work queue") Signed-off-by: Mahesh Bandewar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-09ipvlan: add cond_resched_rcu() while processing muticast backlogMahesh Bandewar1-0/+1
If there are substantial number of slaves created as simulated by Syzbot, the backlog processing could take much longer and result into the issue found in the Syzbot report. INFO: rcu_sched detected stalls on CPUs/tasks: (detected by 1, t=10502 jiffies, g=5049, c=5048, q=752) All QSes seen, last rcu_sched kthread activity 10502 (4294965563-4294955061), jiffies_till_next_fqs=1, root ->qsmask 0x0 syz-executor.1 R running task on cpu 1 10984 11210 3866 0x30020008 179034491270 Call Trace: <IRQ> [<ffffffff81497163>] _sched_show_task kernel/sched/core.c:8063 [inline] [<ffffffff81497163>] _sched_show_task.cold+0x2fd/0x392 kernel/sched/core.c:8030 [<ffffffff8146a91b>] sched_show_task+0xb/0x10 kernel/sched/core.c:8073 [<ffffffff815c931b>] print_other_cpu_stall kernel/rcu/tree.c:1577 [inline] [<ffffffff815c931b>] check_cpu_stall kernel/rcu/tree.c:1695 [inline] [<ffffffff815c931b>] __rcu_pending kernel/rcu/tree.c:3478 [inline] [<ffffffff815c931b>] rcu_pending kernel/rcu/tree.c:3540 [inline] [<ffffffff815c931b>] rcu_check_callbacks.cold+0xbb4/0xc29 kernel/rcu/tree.c:2876 [<ffffffff815e3962>] update_process_times+0x32/0x80 kernel/time/timer.c:1635 [<ffffffff816164f0>] tick_sched_handle+0xa0/0x180 kernel/time/tick-sched.c:161 [<ffffffff81616ae4>] tick_sched_timer+0x44/0x130 kernel/time/tick-sched.c:1193 [<ffffffff815e75f7>] __run_hrtimer kernel/time/hrtimer.c:1393 [inline] [<ffffffff815e75f7>] __hrtimer_run_queues+0x307/0xd90 kernel/time/hrtimer.c:1455 [<ffffffff815e90ea>] hrtimer_interrupt+0x2ea/0x730 kernel/time/hrtimer.c:1513 [<ffffffff844050f4>] local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1031 [inline] [<ffffffff844050f4>] smp_apic_timer_interrupt+0x144/0x5e0 arch/x86/kernel/apic/apic.c:1056 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778 RIP: 0010:do_raw_read_lock+0x22/0x80 kernel/locking/spinlock_debug.c:153 RSP: 0018:ffff8801dad07ab8 EFLAGS: 00000a02 ORIG_RAX: ffffffffffffff12 RAX: 0000000000000000 RBX: ffff8801c4135680 RCX: 0000000000000000 RDX: 1ffff10038826afe RSI: ffff88019d816bb8 RDI: ffff8801c41357f0 RBP: ffff8801dad07ac0 R08: 0000000000004b15 R09: 0000000000310273 R10: ffff88019d816bb8 R11: 0000000000000001 R12: ffff8801c41357e8 R13: 0000000000000000 R14: ffff8801cfb19850 R15: ffff8801cfb198b0 [<ffffffff8101460e>] __raw_read_lock_bh include/linux/rwlock_api_smp.h:177 [inline] [<ffffffff8101460e>] _raw_read_lock_bh+0x3e/0x50 kernel/locking/spinlock.c:240 [<ffffffff840d78ca>] ipv6_chk_mcast_addr+0x11a/0x6f0 net/ipv6/mcast.c:1006 [<ffffffff84023439>] ip6_mc_input+0x319/0x8e0 net/ipv6/ip6_input.c:482 [<ffffffff840211c8>] dst_input include/net/dst.h:449 [inline] [<ffffffff840211c8>] ip6_rcv_finish+0x408/0x610 net/ipv6/ip6_input.c:78 [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:292 [inline] [<ffffffff840214de>] NF_HOOK include/linux/netfilter.h:286 [inline] [<ffffffff840214de>] ipv6_rcv+0x10e/0x420 net/ipv6/ip6_input.c:278 [<ffffffff83a29efa>] __netif_receive_skb_one_core+0x12a/0x1f0 net/core/dev.c:5303 [<ffffffff83a2a15c>] __netif_receive_skb+0x2c/0x1b0 net/core/dev.c:5417 [<ffffffff83a2f536>] process_backlog+0x216/0x6c0 net/core/dev.c:6243 [<ffffffff83a30d1b>] napi_poll net/core/dev.c:6680 [inline] [<ffffffff83a30d1b>] net_rx_action+0x47b/0xfb0 net/core/dev.c:6748 [<ffffffff846002c8>] __do_softirq+0x2c8/0x99a kernel/softirq.c:317 [<ffffffff813e656a>] invoke_softirq kernel/softirq.c:399 [inline] [<ffffffff813e656a>] irq_exit+0x16a/0x1a0 kernel/softirq.c:439 [<ffffffff84405115>] exiting_irq arch/x86/include/asm/apic.h:561 [inline] [<ffffffff84405115>] smp_apic_timer_interrupt+0x165/0x5e0 arch/x86/kernel/apic/apic.c:1058 [<ffffffff84401cbe>] apic_timer_interrupt+0x8e/0xa0 arch/x86/entry/entry_64.S:778 </IRQ> RIP: 0010:__sanitizer_cov_trace_pc+0x26/0x50 kernel/kcov.c:102 RSP: 0018:ffff880196033bd8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff12 RAX: ffff88019d8161c0 RBX: 00000000ffffffff RCX: ffffc90003501000 RDX: 0000000000000002 RSI: ffffffff816236d1 RDI: 0000000000000005 RBP: ffff880196033bd8 R08: ffff88019d8161c0 R09: 0000000000000000 R10: 1ffff10032c067f0 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000080 R14: 0000000000000000 R15: 0000000000000000 [<ffffffff816236d1>] do_futex+0x151/0x1d50 kernel/futex.c:3548 [<ffffffff816260f0>] C_SYSC_futex kernel/futex_compat.c:201 [inline] [<ffffffff816260f0>] compat_SyS_futex+0x270/0x3b0 kernel/futex_compat.c:175 [<ffffffff8101da17>] do_syscall_32_irqs_on arch/x86/entry/common.c:353 [inline] [<ffffffff8101da17>] do_fast_syscall_32+0x357/0xe1c arch/x86/entry/common.c:415 [<ffffffff84401a9b>] entry_SYSENTER_compat+0x8b/0x9d arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7f23c69 RSP: 002b:00000000f5d1f12c EFLAGS: 00000282 ORIG_RAX: 00000000000000f0 RAX: ffffffffffffffda RBX: 000000000816af88 RCX: 0000000000000080 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 000000000816af8c RBP: 00000000f5d1f228 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 rcu_sched kthread starved for 10502 jiffies! g5049 c5048 f0x2 RCU_GP_WAIT_FQS(3) ->state=0x0 ->cpu=1 rcu_sched R running task on cpu 1 13048 8 2 0x90000000 179099587640 Call Trace: [<ffffffff8147321f>] context_switch+0x60f/0xa60 kernel/sched/core.c:3209 [<ffffffff8100095a>] __schedule+0x5aa/0x1da0 kernel/sched/core.c:3934 [<ffffffff810021df>] schedule+0x8f/0x1b0 kernel/sched/core.c:4011 [<ffffffff8101116d>] schedule_timeout+0x50d/0xee0 kernel/time/timer.c:1803 [<ffffffff815c13f1>] rcu_gp_kthread+0xda1/0x3b50 kernel/rcu/tree.c:2327 [<ffffffff8144b318>] kthread+0x348/0x420 kernel/kthread.c:246 [<ffffffff84400266>] ret_from_fork+0x56/0x70 arch/x86/entry/entry_64.S:393 Fixes: ba35f8588f47 (“ipvlan: Defer multicast / broadcast processing to a work-queue”) Signed-off-by: Mahesh Bandewar <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-09ipvlan: don't deref eth hdr before checking it's setMahesh Bandewar1-8/+10
IPvlan in L3 mode discards outbound multicast packets but performs the check before ensuring the ether-header is set or not. This is an error that Eric found through code browsing. Fixes: 2ad7bf363841 (“ipvlan: Initial check-in of the IPVLAN driver.”) Signed-off-by: Mahesh Bandewar <[email protected]> Reported-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-03-09sfc: detach from cb_page in efx_copy_channel()Edward Cree1-0/+1
It's a resource, not a parameter, so we can't copy it into the new channel's TX queues, otherwise aliasing will lead to resource- management bugs if the channel is subsequently torn down without being initialised. Before the Fixes:-tagged commit there was a similar bug with tsoh_page, but I'm not sure it's worth doing another fix for such old kernels. Fixes: e9117e5099ea ("sfc: Firmware-Assisted TSO version 2") Suggested-by: Derek Shute <[email protected]> Signed-off-by: Edward Cree <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.