aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-21mt76: mt7615: improve mt7615_driver_own reliabilityLorenzo Bianconi2-10/+19
mt7615_driver_own can fail if it runs too close to mt7615_fw_own. In order to improve mt7615_driver_own reliability, retry to get runtime-pm ownership if mt7615_driver_own fails Co-developed-by: Sean Wang <[email protected]> Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: add idle-timeout knob in mt7615 debugfsLorenzo Bianconi4-2/+29
Introduce idle-timeout knob in mt7615 debugfs in order to configure the idle time to switch to low-power state Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: enable beacon hw filter for runtime-pmLorenzo Bianconi4-37/+83
In order to reduce number of received interrupts and power consumption, enable hw beacon filter if runtime-pm is enabled Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: add runtime-pm knob in mt7615 debugfsLorenzo Bianconi3-0/+42
Introduce runtime-pm knob in mt7615 debugfs in order to enable/disable runtime pm available in offload firmware Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: do not request {driver,fw}_own if already grantedLorenzo Bianconi3-10/+14
Check MT76_STATE_PM in mt7615_driver_own/mt7615_firmware_own in order to not requested power ownership if it is already granted Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: check MT76_STATE_PM flag before accessing the deviceLorenzo Bianconi2-2/+8
Double-check if the device is in low-power state before accessing registermap in mt7615_sta_rate_tbl_update() and in mt7615_led_set_config() Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: run mt7615_pm_wake in mt7615_mac_sta_{add,remove}Lorenzo Bianconi1-1/+10
Run mt7615_pm_wake()/mt7615_pm_power_save_sched() directly in order to wake the device from low power state in mt7615_mac_sta_{add,remove} since they run holding mt76 mutex in common mt76 code Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: wake device before pushing frames in mt7615_txLorenzo Bianconi4-7/+81
Queue frames pushed by mac80211 running mt7615_tx if the device is low-power state. Run wake workqueue in order to swicth to full-power before transmitting pending frames Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: wake device before pulling packets from mac80211 queuesLorenzo Bianconi2-2/+24
Make sure the device is in full-power before pulling frames from mac80211 queues Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: run mt7615_mcu_set_roc holding mt76 mutexLorenzo Bianconi1-4/+12
Make sure to run mt7615_mcu_set_roc() holding mt76 mutex in order to wake the device from low power state and avoid races Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: run mt7615_mcu_set_wmm holding mt76 mutexLorenzo Bianconi1-1/+7
Make sure to run mt7615_mcu_set_wmm() holding mt76 mutex in order to wake the device from low power state and avoid races Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: add missing lock in mt7615_regd_notifierLorenzo Bianconi1-0/+2
Make sure to run mt7615_dfs_init_radar_detector in mt7615_regd_notifier holding mt76 mutex in order to avoid races and set the device in full power Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: wake device before performing freq scanLorenzo Bianconi1-4/+30
Set device in full power before performing hw scan or hw scheduled scan Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: acquire driver_own before configuring device for suspendLorenzo Bianconi1-0/+4
Make sure to wake the device in mt7615_pci_suspend in order to properly configure device registers before suspend Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: wake device in mt7615_update_channel before access regmapLorenzo Bianconi3-5/+30
Introduce mt7615_update_survey utility routine in order to compute survey stats without waking up the device since it runs holding mt76 lock. Run mt7615_pm_wake directly in mt7615_update_channel since it can run with mt76.mutex held if called by mac80211 Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: introduce pm_power_save delayed workLorenzo Bianconi4-1/+39
Introduce runtime-pm power_save delayed work used to enable low-power after an inactivity period Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: wake device before configuring hw keysLorenzo Bianconi1-3/+9
Make sure the device is in full-power before uploading keys to the hw Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: wake device before accessing regmap in debugfsLorenzo Bianconi1-1/+24
Make sure the device is in full-power before reading regs in debugfs Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: introduce mt7615_mutex_{acquire,release} utilitiesLorenzo Bianconi5-52/+72
Introduce mt7615_mutex_{acquire,release} utility routines in order to switch in full-power/low-power before/after accessing device register-map Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: add mt7615_pm_wake utility routineLorenzo Bianconi6-6/+75
Introduce mt7615_pm_wake utility routine to wake the device from runtime low-power state (lower-power state is currently supported by offload firmware for pcie devices). Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: move mt76 workqueue in common codeLorenzo Bianconi8-34/+26
Move mt76 workqueue from usb to common code in order to be reused adding low-power support for mt7663 chipset Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: avoid polling in fw_own for mt7663Lorenzo Bianconi1-2/+2
According to the vendor sdk, mt7663 does not need to poll register after firmware own. Since just mt7622 polls status register, set proper timeout value according to the vendor sdk Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7915: avoid memcpy in rxv operationRyder Lee2-48/+37
Avoid memcpy in Rx hot path to slightly improve performance. Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt76x2u: enable HC-M7662BU1Lorenzo Bianconi1-0/+1
Enable support for HC-M7662BU1 module on mt76x2u driver Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt76x2: fix pci suspend/resume on mt7612eLorenzo Bianconi3-0/+74
Fix the following mt7612e hw hangs during suspend/resume reported on Dell Vostro 3360 mt76x2e 0000:01:00.0: MCU message 2 (seq 11) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 12) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 13) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested mt76x2e 0000:01:00.0: MCU message 2 (seq 1) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 2) timed out mt76x2e 0000:01:00.0: MCU message 30 (seq 3) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested mt76x2e 0000:01:00.0: MCU message 31 (seq 5) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 6) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 7) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 8) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 9) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 10) timed out mt76x2e 0000:01:00.0: MCU message 31 (seq 11) timed out mt76x2e 0000:01:00.0: Firmware Version: 0.0.00 mt76x2e 0000:01:00.0: Build: 1 mt76x2e 0000:01:00.0: Build Time: 201507311614____ mt76x2e 0000:01:00.0: Firmware running! ieee80211 phy0: Hardware restart was requested ------------[ cut here ]----------- CPU: 3 PID: 11956 Comm: kworker/3:1 Not tainted 5.7.0-pf2 #1 Hardware name: Dell Inc. Vostro 3360/0F5DWF, BIOS A18 09/25/2013 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:ieee80211_reconfig+0x234/0x1700 [mac80211] RSP: 0018:ffffb803c23ffdf0 EFLAGS: 00010286 RAX: 00000000fffffff0 RBX: ffff9595a7564900 RCX: 0000000000000008 RDX: 0000000000000000 RSI: 0000000000000100 RDI: 0000000000000100 RBP: ffff9595a7ec07e0 R08: 0000000000000000 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000000000 R12: ffff9595a7ec18d0 R13: 00000000ffffffff R14: 0000000000000000 R15: 00000000fffffff0 FS: 0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0 Call Trace: ieee80211_restart_work+0xb7/0xe0 [mac80211] process_one_work+0x1d4/0x3c0 worker_thread+0x228/0x470 ? process_one_work+0x3c0/0x3c0 kthread+0x19c/0x1c0 ? __kthread_init_worker+0x30/0x30 ret_from_fork+0x35/0x40 wlp1s0: Failed check-sdata-in-driver check, flags: 0x0 CPU: 3 PID: 11956 Comm: kworker/3:1 Tainted: G W 5.7.0-pf2 #1 Hardware name: Dell Inc. Vostro 3360/0F5DWF, BIOS A18 09/25/2013 Workqueue: events_freezable ieee80211_restart_work [mac80211] RIP: 0010:drv_remove_interface+0x11f/0x130 [mac80211] RSP: 0018:ffffb803c23ffc80 EFLAGS: 00010282 RAX: 0000000000000000 RBX: ffff9595a7564900 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000082 RDI: 00000000ffffffff RBP: ffff9595a7ec1930 R08: 00000000000004b6 R09: 0000000000000001 R10: 0000000000000001 R11: 0000000000006f08 R12: ffff9595a7ec1000 R13: ffff9595a75654b8 R14: ffff9595a7ec0ca0 R15: ffff9595a7ec07e0 FS: 0000000000000000(0000) GS:ffff9595af2c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000055e56d7de000 CR3: 000000042200a001 CR4: 00000000001706e0 Call Trace: ieee80211_do_stop+0x5af/0x8c0 [mac80211] ieee80211_stop+0x16/0x20 [mac80211] __dev_close_many+0xaa/0x120 dev_close_many+0xa1/0x2b0 dev_close+0x6d/0x90 cfg80211_shutdown_all_interfaces+0x71/0xd0 [cfg80211] ieee80211_reconfig+0xa2/0x1700 [mac80211] ieee80211_restart_work+0xb7/0xe0 [mac80211] process_one_work+0x1d4/0x3c0 worker_thread+0x228/0x470 ? process_one_work+0x3c0/0x3c0 kthread+0x19c/0x1c0 ? __kthread_init_worker+0x30/0x30 ret_from_fork+0x35/0x40 Fixes: 7bc04215a66b ("mt76: add driver code for MT76x2e") Tested-by: Oleksandr Natalenko <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7915: update HE capabilitiesRyder Lee1-18/+26
Sync from SDK to update HE capabilities. Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: implement testmode supportFelix Fietkau10-9/+523
Supports sending a configurable number of packets with a specific rate and configurable tx power levels / antenna settings, as well as displaying rx statistics. Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: add API for testmode supportFelix Fietkau8-0/+765
This can be used for calibration in the manufacturing process. It supports sending a configurable number of packets with a specific rate and configurable tx power levels / antenna settings. It also supports receiving packets and showing some statistics, including packet counters and detailed RSSI information. It will only be compiled in if CONFIG_NL80211_TESTMODE is enabled Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: vif_mask to struct mt76_phyFelix Fietkau10-19/+16
All drivers use this in pretty much the same way. Moving it to core helps with some checks for the upcoming testmode support Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: use full on-chip memory address for WF_PHY registersFelix Fietkau3-5/+1
Now that the bus access functions can use mapping for accessing full register addresses, use it for WF_PHY registers to keep them constant. Needed for follow-up work on testmode support Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: add support for accessing RF registers via MCUFelix Fietkau4-3/+77
Includes debugfs files for testing it. Will be used for testmode support. Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: add support for accessing mapped registers via bus opsFelix Fietkau2-0/+47
Makes it possible to read/write them via debugfs, similar to mt7603 Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: schedule tx tasklet and sta poll on mac tx freeFelix Fietkau2-4/+6
Unlike on earlier chips, DMA completion on MT7615 does not imply actually having sent out any packets. Since AQL will prevent filling the hardware queues and will only allow more packets to be passed to the driver after tx completion, it makes much more sense to schedule the tx tasklet there. This is also needed for scheduling tx in testmode support Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt76x2e: rename routines in pci.cLorenzo Bianconi1-7/+7
Rely on mt76x2e prefix in mt76x2/pci.c and align to the rest of mt76 code Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7915: overwrite qid for non-bufferable mgmt framesRyder Lee3-18/+20
Overwrite hw queue id for non-bufferable management frames if the hw/fw support always txq (altxq) in order to be in sync with mac txwi code Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7915: use ieee80211_tx_queue_params to avoid open codedRyder Lee3-19/+10
This is easy to add MU EDCA parameters in the future. This patch also fixes a wrong cw_min assignment. Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7915: add MU-MIMO supportRyder Lee4-10/+87
Enable MU-MIMO DL/UL and add relative counters in debugfs. Currently MU modules read WTBL first to notify BA changes to other cross modules, so adjust mt7915_mcu_sta_ba() accordingly. Tested-by: Evelyn Tsai <[email protected]> Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7915: add a fixed AC queue mappingRyder Lee4-11/+29
In MT7915, hardware queue map is flexible. However, certain firmware modules like MU and U-APSD presume a fixed queue order to adapt some devices that have DMA scheduler with a strict order, so this patch can help in the long run. Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: add .set_tsf callbackRyder Lee2-0/+22
It is useful for IBSS Mesh to adjust t_clockdrift. Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: add U-APSD support on AP sideLorenzo Bianconi3-3/+68
Introduce U-APSD support in mt76 driver for AP interface Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: rely on register macrosLorenzo Bianconi2-4/+4
For consistency with the rest of the code always rely on defined macros for register access Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: fix include in pci.hMarkus Theil1-0/+1
kernel test robot <[email protected]> found the following issue and Kalle Valo forwarded it to Linux wireless. drivers/net/wireless/mediatek/mt76/pci.c:8:6: warning: no previous prototype for 'mt76_pci_disable_aspm' Fix this by adding the missing include of mt76.h as Kalle suggested. Signed-off-by: Markus Theil <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: allow more channels, allowed in ETSI domainMarkus Theil1-0/+3
While looking at the ETSI regulatory domain definitions and a patch, which allows more channels for ath10k, I also checked the channels allowed for mt76. ETSI regulations would possibly allow to add channels 32, 68, 96, 144, 169 and 173. IEEE 802.11-2016 defines no operating class for channels 32, 68 and 96. This leaves us channels 144, 169 and 173, which are included in this patch. I tested 169 and 173 with a mt76 based USB dongle (AVM AC 860) and they worked fine. If I saw that right, these channels are also covered by register definitions inside the driver. Channel 144 should also work, but gets disabled by the kernel as of now. Signed-off-by: Markus Theil <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: fix up typo in Kconfig for MT7663USean Wang1-1/+1
Fix up typo in Kconfig with indicating MT7663U is an 802.11ac device Fixes: eb99cc95c3b6 ("mt76: mt7615: introduce mt7663u support") Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7663: introduce ARP filter offloadSean Wang4-3/+91
Introduce ARP filter offload Co-developed-by: Wan-Feng Jiang <[email protected]> Signed-off-by: Wan-Feng Jiang <[email protected]> Co-developed-by: Soul Huang <[email protected]> Signed-off-by: Soul Huang <[email protected]> Co-developed-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Sean Wang <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: usb: rely on mt76_for_each_q_rxLorenzo Bianconi2-32/+12
Rely on mt76_for_each_q_rx whenever possible in order to simply the code Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: re-enable offloading of sequence number assignmentFelix Fietkau3-9/+41
Preparation for supporting more offload features Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: overwrite qid for non-bufferable mgmt framesLorenzo Bianconi6-15/+18
Overwrite hw queue id for non-bufferable management frames if the hw support always txq (altxq) in order to be in sync with mac txwi code Fixes: cdad4874057d ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Suggested-by: Felix Fietkau <[email protected]> Tested-by: Sean Wang <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: fix hw queue mappingLorenzo Bianconi6-28/+45
mt7622/mt7663 chipsets rely on a fixed reverse queue map order respect to mac80211 one: - q(0): IEEE80211_AC_BK - q(1): IEEE80211_AC_BE - q(2): IEEE80211_AC_VI - q(3): IEEE80211_AC_VO Fixes: cdad4874057d ("mt76: mt7615: add dma and tx queue initialization for MT7622") Fixes: f40ac0f3d3c0 ("mt76: mt7615: introduce mt7663e support") Co-developed-by: Sean Wang <[email protected]> Signed-off-by: Sean Wang <[email protected]> Co-developed-by: Ryder Lee <[email protected]> Signed-off-by: Ryder Lee <[email protected]> Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
2020-07-21mt76: mt7615: fix lmac queue debugsfs entryLorenzo Bianconi1-4/+5
acs and wmm index are swapped in mt7615_queues_acq respect to the hw design Signed-off-by: Lorenzo Bianconi <[email protected]> Signed-off-by: Felix Fietkau <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.