aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-01-18bnxt_en: Fix NTUPLE firmware command failures.Michael Chan1-3/+0
The NTUPLE related firmware commands are sent to the wrong firmware channel, causing all these commands to fail on new firmware that supports the new firmware channel. Fix it by excluding the 3 NTUPLE firmware commands from the list for the new firmware channel. Fixes: 760b6d33410c ("bnxt_en: Add support for 2nd firmware message channel.") Signed-off-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-18ptrace: reintroduce usage of subjective credentials in ptrace_has_cap()Christian Brauner1-5/+10
Commit 69f594a38967 ("ptrace: do not audit capability check when outputing /proc/pid/stat") introduced the ability to opt out of audit messages for accesses to various proc files since they are not violations of policy. While doing so it somehow switched the check from ns_capable() to has_ns_capability{_noaudit}(). That means it switched from checking the subjective credentials of the task to using the objective credentials. This is wrong since. ptrace_has_cap() is currently only used in ptrace_may_access() And is used to check whether the calling task (subject) has the CAP_SYS_PTRACE capability in the provided user namespace to operate on the target task (object). According to the cred.h comments this would mean the subjective credentials of the calling task need to be used. This switches ptrace_has_cap() to use security_capable(). Because we only call ptrace_has_cap() in ptrace_may_access() and in there we already have a stable reference to the calling task's creds under rcu_read_lock() there's no need to go through another series of dereferences and rcu locking done in ns_capable{_noaudit}(). As one example where this might be particularly problematic, Jann pointed out that in combination with the upcoming IORING_OP_OPENAT feature, this bug might allow unprivileged users to bypass the capability checks while asynchronously opening files like /proc/*/mem, because the capability checks for this would be performed against kernel credentials. To illustrate on the former point about this being exploitable: When io_uring creates a new context it records the subjective credentials of the caller. Later on, when it starts to do work it creates a kernel thread and registers a callback. The callback runs with kernel creds for ktask->real_cred and ktask->cred. To prevent this from becoming a full-blown 0-day io_uring will call override_cred() and override ktask->cred with the subjective credentials of the creator of the io_uring instance. With ptrace_has_cap() currently looking at ktask->real_cred this override will be ineffective and the caller will be able to open arbitray proc files as mentioned above. Luckily, this is currently not exploitable but will turn into a 0-day once IORING_OP_OPENAT{2} land in v5.6. Fix it now! Cc: Oleg Nesterov <[email protected]> Cc: Eric Paris <[email protected]> Cc: [email protected] Reviewed-by: Kees Cook <[email protected]> Reviewed-by: Serge Hallyn <[email protected]> Reviewed-by: Jann Horn <[email protected]> Fixes: 69f594a38967 ("ptrace: do not audit capability check when outputing /proc/pid/stat") Signed-off-by: Christian Brauner <[email protected]>
2020-01-18Merge tag 'drm-misc-fixes-2020-01-16' of ↵Dave Airlie4-4/+44
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes virtio: maintain obj reservation lock when submitting cmds (Gerd) rockchip: increase link rate var size to accommodate rates (Tobias) mst: serialize down messages and clear timeslots are on unplug (Wayne) Cc: Gerd Hoffmann <[email protected]> Cc: Tobias Schramm <[email protected]> Cc: Wayne Lin <[email protected]> Signed-off-by: Dave Airlie <[email protected]> From: Sean Paul <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/20200116162856.GA11524@art_vandelay
2020-01-18Merge tag 'drm-intel-fixes-2020-01-16' of ↵Dave Airlie4-11/+48
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - uAPI fix: Remove dash and colon from PMU names to comply with tools/perf - Fix for include file that was indirectly included - Two fixes to make sure VMA are marked active for error capture Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-01-17mtd: rawnand: gpmi: Restore nfc timing setup after suspend/resumeEsben Haabendal1-0/+4
As we reset the GPMI block at resume, the timing parameters setup by a previous exec_op is lost. Rewriting GPMI timing registers on first exec_op after resume fixes the problem. Fixes: ef347c0cfd61 ("mtd: rawnand: gpmi: Implement exec_op") Cc: [email protected] Signed-off-by: Esben Haabendal <[email protected]> Acked-by: Han Xu <[email protected]> Signed-off-by: Miquel Raynal <[email protected]>
2020-01-17mtd: rawnand: gpmi: Fix suspend/resume problemEsben Haabendal1-1/+6
On system resume, the gpmi clock must be enabled before accessing gpmi block. Without this, resume causes something like [ 661.348790] gpmi_reset_block(5cbb0f7e): module reset timeout [ 661.348889] gpmi-nand 1806000.gpmi-nand: Error setting GPMI : -110 [ 661.348928] PM: dpm_run_callback(): platform_pm_resume+0x0/0x44 returns -110 [ 661.348961] PM: Device 1806000.gpmi-nand failed to resume: error -110 Fixes: ef347c0cfd61 ("mtd: rawnand: gpmi: Implement exec_op") Cc: [email protected] Signed-off-by: Esben Haabendal <[email protected]> Acked-by: Han Xu <[email protected]> Signed-off-by: Miquel Raynal <[email protected]>
2020-01-17mtd: spi-nor: Fix quad enable for Spansion like flashesMichael Walle1-0/+2
The commit 7b678c69c0ca ("mtd: spi-nor: Merge spansion Quad Enable methods") forgot to actually set the QE bit in some cases. Thus this breaks quad mode accesses to flashes which support readback of the status register-2. Fix it. Fixes: 7b678c69c0ca ("mtd: spi-nor: Merge spansion Quad Enable methods") Signed-off-by: Michael Walle <[email protected]> Reviewed-by: Tudor Ambarus <[email protected]> Signed-off-by: Miquel Raynal <[email protected]>
2020-01-17mtd: spi-nor: Fix selection of 4-byte addressing opcodes on SpansionVignesh Raghavendra1-3/+1
mtd->size is still unassigned when running spansion_post_sfdp_fixups() hook, therefore use nor->params.size to determine the size of flash device. This makes sure that 4-byte addressing opcodes are used on Spansion flashes that are larger than 16MiB and don't have SFDP 4BAIT table populated. Fixes: 92094ebc385e ("mtd: spi-nor: Add spansion_post_sfdp_fixups()") Signed-off-by: Vignesh Raghavendra <[email protected]> Reviewed-by: Tudor Ambarus <[email protected]> Signed-off-by: Miquel Raynal <[email protected]>
2020-01-17Merge tag 'io_uring-5.5-2020-01-16' of git://git.kernel.dk/linux-blockLinus Torvalds2-28/+56
Pull io_uring fixes form Jens Axboe: - Ensure ->result is always set when IO is retried (Bijan) - In conjunction with the above, fix a regression in polled IO issue when retried (me/Bijan) - Don't setup async context for read/write fixed, otherwise we may wrongly map the iovec on retry (me) - Cancel io-wq work if we fail getting mm reference (me) - Ensure dependent work is always initialized correctly (me) - Only allow original task to submit IO, don't allow it from a passed ring fd (me) * tag 'io_uring-5.5-2020-01-16' of git://git.kernel.dk/linux-block: io_uring: only allow submit from owning task io_uring: ensure workqueue offload grabs ring mutex for poll list io_uring: clear req->result always before issuing a read/write request io_uring: be consistent in assigning next work from handler io-wq: cancel work if we fail getting a mm reference io_uring: don't setup async context for read/write fixed
2020-01-17Merge tag 'for-5.5-rc6-tag' of ↵Linus Torvalds6-46/+114
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "A few more fixes that have been in the works during last twp weeks. All have a user visible effect and are stable material: - scrub: properly update progress after calling cancel ioctl, calling 'resume' would start from the beginning otherwise - fix subvolume reference removal, after moving out of the original path the reference is not recognized and will lead to transaction abort - fix reloc root lifetime checks, could lead to crashes when there's subvolume cleaning running in parallel - fix memory leak when quotas get disabled in the middle of extent accounting - fix transaction abort in case of balance being started on degraded mount on eg. RAID1" * tag 'for-5.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: check rw_devices, not num_devices for balance Btrfs: always copy scrub arguments back to user space btrfs: relocation: fix reloc_root lifespan and access btrfs: fix memory leak in qgroup accounting btrfs: do not delete mismatched root refs btrfs: fix invalid removal of root ref btrfs: rework arguments of btrfs_unlink_subvol
2020-01-17Merge tag 'usb-serial-5.5-rc7' of ↵Greg Kroah-Hartman8-9/+36
https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus Johan writes: USB-serial fixes for 5.5-rc7 Here are a few fixes for issues related to unbound port devices which could lead to NULL-pointer dereferences. Notably the bind attributes for usb-serial (port) drivers are removed as almost none of the drivers can handle individual ports going away once they've been bound. Included are also some new device ids. All but the unbound-port fixes have been in linux-next with no reported issues. Signed-off-by: Johan Hovold <[email protected]> * tag 'usb-serial-5.5-rc7' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: quatech2: handle unbound ports USB: serial: keyspan: handle unbound ports USB: serial: io_edgeport: add missing active-port sanity check USB: serial: io_edgeport: handle unbound ports on URB completion USB: serial: ch341: handle unbound port at reset_resume USB: serial: suppress driver bind attributes USB: serial: option: add support for Quectel RM500Q in QDL mode USB: serial: opticon: fix control-message timeouts USB: serial: option: Add support for Quectel RM500Q USB: serial: simple: Add Motorola Solutions TETRA MTP3xxx and MTP85xx
2020-01-17Merge tag 'fuse-fixes-5.5-rc7' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fix from Miklos Szeredi: "Fix a regression in the last release affecting the ftp module of the gvfs filesystem" * tag 'fuse-fixes-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: fix fuse_send_readpages() in the syncronous read case
2020-01-17Merge tag 'sound-5.5-rc7' of ↵Linus Torvalds17-94/+234
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "This became bigger than I have hoped for rc7. But, the only large LOC is for stm32 fixes that are simple rewriting of register access helpers, while the rest are all nice and small fixes: - A few ASoC fixes for the remaining probe error handling bugs - ALSA sequencer core fix for racy proc file accesses - Revert the option rename of snd-hda-intel to make compatible again - Various device-specific fixes" * tag 'sound-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: seq: Fix racy access for queue timer in proc read ALSA: usb-audio: fix sync-ep altsetting sanity check ASoC: msm8916-wcd-digital: Reset RX interpolation path after use ASoC: msm8916-wcd-analog: Fix MIC BIAS Internal1 ASoC: cros_ec_codec: Make the device acpi compatible ASoC: sti: fix possible sleep-in-atomic ASoC: msm8916-wcd-analog: Fix selected events for MIC BIAS External1 ASoC: hdac_hda: Fix error in driver removal after failed probe ASoC: SOF: Intel: fix HDA codec driver probe with multiple controllers ASoC: SOF: Intel: lower print level to dbg if we will reinit DSP ALSA: dice: fix fallback from protocol extension into limited functionality ALSA: firewire-tascam: fix corruption due to spin lock without restoration in SoftIRQ context ALSA: hda: Rename back to dmic_detect option ASoC: stm32: dfsdm: fix 16 bits record ASoC: stm32: sai: fix possible circular locking ASoC: Fix NULL dereference at freeing ASoC: Intel: bytcht_es8316: Fix Irbis NB41 netbook quirk ASoC: rt5640: Fix NULL dereference on module unload
2020-01-17hwmon: (core) Do not use device managed functions for memory allocationsGuenter Roeck1-27/+41
The hwmon core uses device managed functions, tied to the hwmon parent device, for various internal memory allocations. This is problematic since hwmon device lifetime does not necessarily match its parent's device lifetime. If there is a mismatch, memory leaks will accumulate until the parent device is released. Fix the problem by managing all memory allocations internally. The only exception is memory allocation for thermal device registration, which can be tied to the hwmon device, along with thermal device registration itself. Fixes: d560168b5d0f ("hwmon: (core) New hwmon registration API") Cc: [email protected] # v4.14.x: 47c332deb8e8: hwmon: Deal with errors from the thermal subsystem Cc: [email protected] # v4.14.x: 74e3512731bd: hwmon: (core) Fix double-free in __hwmon_device_register() Cc: [email protected] # v4.9.x: 3a412d5e4a1c: hwmon: (core) Simplify sysfs attribute name allocation Cc: [email protected] # v4.9.x: 47c332deb8e8: hwmon: Deal with errors from the thermal subsystem Cc: [email protected] # v4.9.x: 74e3512731bd: hwmon: (core) Fix double-free in __hwmon_device_register() Cc: [email protected] # v4.9+ Cc: Martin K. Petersen <[email protected]> Signed-off-by: Guenter Roeck <[email protected]>
2020-01-17hwmon: (adt7475) Make volt2reg return same reg as reg2volt inputLuuk Paulussen1-2/+3
reg2volt returns the voltage that matches a given register value. Converting this back the other way with volt2reg didn't return the same register value because it used truncation instead of rounding. This meant that values read from sysfs could not be written back to sysfs to set back the same register value. With this change, volt2reg will return the same value for every voltage previously returned by reg2volt (for the set of possible input values) Signed-off-by: Luuk Paulussen <[email protected]> Link: https://lore.kernel.org/r/[email protected] cc: [email protected] Signed-off-by: Guenter Roeck <[email protected]>
2020-01-17hwmon: (nct7802) Fix non-working alarm on voltagesGilles Buloz1-4/+67
No alarm is reported by /sys/.../inX_alarm In detail: The SMI Voltage status register is the only register giving a status for voltages, but it does not work like the non-SMI status registers used for temperatures and fans. A bit is set for each input crossing a threshold, in both direction, but the "inside" or "outside" limits info is not available. Also this register is cleared on read. Note : this is not explicitly spelled out in the datasheet, but from experiment. As a result if an input is crossing a threshold (min or max in any direction), the alarm is reported only once even if the input is still outside limits. Also if the alarm for another input is read before the one of this input, no alarm is reported at all. Signed-off-by: Gilles Buloz <[email protected]> Link: https://lore.kernel.org/r/5de0f566.tBga5POKAgHlmd0p%[email protected] Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by: Guenter Roeck <[email protected]>
2020-01-17hwmon: (nct7802) Fix voltage limits to wrong registersGilles Buloz1-2/+2
in0 thresholds are written to the in2 thresholds registers in2 thresholds to in3 thresholds in3 thresholds to in4 thresholds in4 thresholds to in0 thresholds Signed-off-by: Gilles Buloz <[email protected]> Link: https://lore.kernel.org/r/5de0f509.rc0oEvPOMjbfPW1w%[email protected] Fixes: 3434f3783580 ("hwmon: Driver for Nuvoton NCT7802Y") Signed-off-by: Guenter Roeck <[email protected]>
2020-01-17USB: serial: quatech2: handle unbound portsJohan Hovold1-0/+6
Check for NULL port data in the modem- and line-status handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe). Note that the other (stubbed) event handlers qt2_process_xmit_empty() and qt2_process_flush() would need similar sanity checks in case they are ever implemented. Fixes: f7a33e608d9a ("USB: serial: add quatech2 usb to serial driver") Cc: stable <[email protected]> # 3.5 Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-01-17USB: serial: keyspan: handle unbound portsJohan Hovold1-0/+4
Check for NULL port data in the control URB completion handlers to avoid dereferencing a NULL pointer in the unlikely case where a port device isn't bound to a driver (e.g. after an allocation failure on port probe()). Fixes: 0ca1268e109a ("USB Serial Keyspan: add support for USA-49WG & USA-28XG") Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-01-17USB: serial: io_edgeport: add missing active-port sanity checkJohan Hovold1-5/+7
The driver receives the active port number from the device, but never made sure that the port number was valid. This could lead to a NULL-pointer dereference or memory corruption in case a device sends data for an invalid port. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-01-17USB: serial: io_edgeport: handle unbound ports on URB completionJohan Hovold1-2/+2
Check for NULL port data in the shared interrupt and bulk completion callbacks to avoid dereferencing a NULL pointer in case a device sends data for a port device which isn't bound to a driver (e.g. due to a malicious device having unexpected endpoints or after an allocation failure on port probe). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-01-17USB: serial: ch341: handle unbound port at reset_resumeJohan Hovold1-1/+5
Check for NULL port data in reset_resume() to avoid dereferencing a NULL pointer in case the port device isn't bound to a driver (e.g. after a failed control request at port probe). Fixes: 1ded7ea47b88 ("USB: ch341 serial: fix port number changed after resume") Cc: stable <[email protected]> # 2.6.30 Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-01-17btrfs: check rw_devices, not num_devices for balanceJosef Bacik1-1/+5
The fstest btrfs/154 reports [ 8675.381709] BTRFS: Transaction aborted (error -28) [ 8675.383302] WARNING: CPU: 1 PID: 31900 at fs/btrfs/block-group.c:2038 btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs] [ 8675.390925] CPU: 1 PID: 31900 Comm: btrfs Not tainted 5.5.0-rc6-default+ #935 [ 8675.392780] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba527-rebuilt.opensuse.org 04/01/2014 [ 8675.395452] RIP: 0010:btrfs_create_pending_block_groups+0x1e0/0x1f0 [btrfs] [ 8675.402672] RSP: 0018:ffffb2090888fb00 EFLAGS: 00010286 [ 8675.404413] RAX: 0000000000000000 RBX: ffff92026dfa91c8 RCX: 0000000000000001 [ 8675.406609] RDX: 0000000000000000 RSI: ffffffff8e100899 RDI: ffffffff8e100971 [ 8675.408775] RBP: ffff920247c61660 R08: 0000000000000000 R09: 0000000000000000 [ 8675.410978] R10: 0000000000000000 R11: 0000000000000000 R12: 00000000ffffffe4 [ 8675.412647] R13: ffff92026db74000 R14: ffff920247c616b8 R15: ffff92026dfbc000 [ 8675.413994] FS: 00007fd5e57248c0(0000) GS:ffff92027d800000(0000) knlGS:0000000000000000 [ 8675.416146] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 8675.417833] CR2: 0000564aa51682d8 CR3: 000000006dcbc004 CR4: 0000000000160ee0 [ 8675.419801] Call Trace: [ 8675.420742] btrfs_start_dirty_block_groups+0x355/0x480 [btrfs] [ 8675.422600] btrfs_commit_transaction+0xc8/0xaf0 [btrfs] [ 8675.424335] reset_balance_state+0x14a/0x190 [btrfs] [ 8675.425824] btrfs_balance.cold+0xe7/0x154 [btrfs] [ 8675.427313] ? kmem_cache_alloc_trace+0x235/0x2c0 [ 8675.428663] btrfs_ioctl_balance+0x298/0x350 [btrfs] [ 8675.430285] btrfs_ioctl+0x466/0x2550 [btrfs] [ 8675.431788] ? mem_cgroup_charge_statistics+0x51/0xf0 [ 8675.433487] ? mem_cgroup_commit_charge+0x56/0x400 [ 8675.435122] ? do_raw_spin_unlock+0x4b/0xc0 [ 8675.436618] ? _raw_spin_unlock+0x1f/0x30 [ 8675.438093] ? __handle_mm_fault+0x499/0x740 [ 8675.439619] ? do_vfs_ioctl+0x56e/0x770 [ 8675.441034] do_vfs_ioctl+0x56e/0x770 [ 8675.442411] ksys_ioctl+0x3a/0x70 [ 8675.443718] ? trace_hardirqs_off_thunk+0x1a/0x1c [ 8675.445333] __x64_sys_ioctl+0x16/0x20 [ 8675.446705] do_syscall_64+0x50/0x210 [ 8675.448059] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 8675.479187] BTRFS: error (device vdb) in btrfs_create_pending_block_groups:2038: errno=-28 No space left We now use btrfs_can_overcommit() to see if we can flip a block group read only. Before this would fail because we weren't taking into account the usable un-allocated space for allocating chunks. With my patches we were allowed to do the balance, which is technically correct. The test is trying to start balance on degraded mount. So now we're trying to allocate a chunk and cannot because we want to allocate a RAID1 chunk, but there's only 1 device that's available for usage. This results in an ENOSPC. But we shouldn't even be making it this far, we don't have enough devices to restripe. The problem is we're using btrfs_num_devices(), that also includes missing devices. That's not actually what we want, we need to use rw_devices. The chunk_mutex is not needed here, rw_devices changes only in device add, remove or replace, all are excluded by EXCL_OP mechanism. Fixes: e4d8ec0f65b9 ("Btrfs: implement online profile changing") CC: [email protected] # 4.4+ Signed-off-by: Josef Bacik <[email protected]> Reviewed-by: David Sterba <[email protected]> [ add stacktrace, update changelog, drop chunk_mutex ] Signed-off-by: David Sterba <[email protected]>
2020-01-17Btrfs: always copy scrub arguments back to user spaceFilipe Manana1-1/+13
If scrub returns an error we are not copying back the scrub arguments structure to user space. This prevents user space to know how much progress scrub has done if an error happened - this includes -ECANCELED which is returned when users ask for scrub to stop. A particular use case, which is used in btrfs-progs, is to resume scrub after it is canceled, in that case it relies on checking the progress from the scrub arguments structure and then use that progress in a call to resume scrub. So fix this by always copying the scrub arguments structure to user space, overwriting the value returned to user space with -EFAULT only if copying the structure failed to let user space know that either that copying did not happen, and therefore the structure is stale, or it happened partially and the structure is probably not valid and corrupt due to the partial copy. Reported-by: Graham Cobb <[email protected]> Link: https://lore.kernel.org/linux-btrfs/[email protected]/ Fixes: 06fe39ab15a6a4 ("Btrfs: do not overwrite scrub error with fault error in scrub ioctl") CC: [email protected] # 5.1+ Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Qu Wenruo <[email protected]> Tested-by: Graham Cobb <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-01-17Merge tag 'gpio-v5.5-4' of ↵Linus Torvalds2-57/+107
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO fixes from Linus Walleij: "This reverts the GPIOLIB_IRQCHIP in the ThunderX driver. ThunderX is a piece of Arm-based server chip. I converted the driver to hierarchical gpiochip without access to real silicon and failed miserably since I didn't take MSI's into account. Kevin Hao helpfully stepped in and fixed it properly, let's revert it for v5.5 and put the proper conversion into v5.6" * tag 'gpio-v5.5-4' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: Revert "gpio: thunderx: Switch to GPIOLIB_IRQCHIP"
2020-01-17Merge tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-blockLinus Torvalds6-10/+17
Pull block fixes from Jens Axboe: "Three fixes that should go into this release: - The 32-bit segment size fix that I mentioned last week (Ming) - Use uint for the block size (Mikulas) - A null_blk zone write handling fix (Damien)" * tag 'block-5.5-2020-01-16' of git://git.kernel.dk/linux-block: block: fix an integer overflow in logical block size null_blk: Fix zone write handling block: fix get_max_segment_size() overflow on 32bit arch
2020-01-17net: systemport: Fixed queue mapping in internal ring mapFlorian Fainelli1-3/+4
We would not be transmitting using the correct SYSTEMPORT transmit queue during ndo_select_queue() which looks up the internal TX ring map because while establishing the mapping we would be off by 4, so for instance, when we populate switch port mappings we would be doing: switch port 0, queue 0 -> ring index #0 switch port 0, queue 1 -> ring index #1 ... switch port 0, queue 3 -> ring index #3 switch port 1, queue 0 -> ring index #8 (4 + 4 * 1) ... instead of using ring index #4. This would cause our ndo_select_queue() to use the fallback queue mechanism which would pick up an incorrect ring for that switch port. Fix this by using the correct switch queue number instead of SYSTEMPORT queue number. Fixes: 25c440704661 ("net: systemport: Simplify queue mapping logic") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-17net: dsa: bcm_sf2: Configure IMP port for 2Gb/secFlorian Fainelli1-1/+1
With the implementation of the system reset controller we lost a setting that is currently applied by the bootloader and which configures the IMP port for 2Gb/sec, the default is 1Gb/sec. This is needed given the number of ports and applications we expect to run so bring back that setting. Fixes: 01b0ac07589e ("net: dsa: bcm_sf2: Add support for optional reset controller line") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-17net: dsa: sja1105: Don't error out on disabled ports with no phy-modeVladimir Oltean1-1/+1
The sja1105_parse_ports_node function was tested only on device trees where all ports were enabled. Fix this check so that the driver continues to probe only with the ports where status is not "disabled", as expected. Fixes: 8aa9ebccae87 ("net: dsa: Introduce driver for NXP SJA1105 5-port L2 switch") Signed-off-by: Vladimir Oltean <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-17net: phy: dp83867: Set FORCE_LINK_GOOD to default after resetMichael Grzeschik1-1/+7
According to the Datasheet this bit should be 0 (Normal operation) in default. With the FORCE_LINK_GOOD bit set, it is not possible to get a link. This patch sets FORCE_LINK_GOOD to the default value after resetting the phy. Signed-off-by: Michael Grzeschik <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-17perf/x86/intel/uncore: Remove PCIe3 unit for SNRKan Liang1-24/+0
The PCIe Root Port driver for CPU Complex PCIe Root Ports are not loaded on SNR. The device ID for SNR PCIe3 unit is used by both uncore driver and the PCIe Root Port driver. If uncore driver is loaded, the PCIe Root Port driver never be probed. Remove the PCIe3 unit for SNR for now. The support for PCIe3 unit will be added later separately. Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-01-17perf/x86/intel/uncore: Fix missing marker for snr_uncore_imc_freerunning_eventsKan Liang1-0/+1
An Oops during the boot is found on some SNR machines. It turns out this is because the snr_uncore_imc_freerunning_events[] array was missing an end-marker. Fixes: ee49532b38dd ("perf/x86/intel/uncore: Add IMC uncore support for Snow Ridge") Reported-by: Like Xu <[email protected]> Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Tested-by: Like Xu <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2020-01-17perf/x86/intel/uncore: Add PCI ID of IMC for Xeon E3 V5 FamilyKan Liang1-0/+6
The IMC uncore support is missed for E3-1585 v5 CPU. Intel Xeon E3 V5 Family has Sky Lake CPU. Add the PCI ID of IMC for Intel Xeon E3 V5 Family. Reported-by: Rosales-fernandez, Carlos <[email protected]> Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Tested-by: Rosales-fernandez, Carlos <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2020-01-17perf: Correctly handle failed perf_get_aux_event()Mark Rutland1-1/+3
Vince reports a worrying issue: | so I was tracking down some odd behavior in the perf_fuzzer which turns | out to be because perf_even_open() sometimes returns 0 (indicating a file | descriptor of 0) even though as far as I can tell stdin is still open. ... and further the cause: | error is triggered if aux_sample_size has non-zero value. | | seems to be this line in kernel/events/core.c: | | if (perf_need_aux_event(event) && !perf_get_aux_event(event, group_leader)) | goto err_locked; | | (note, err is never set) This seems to be a thinko in commit: ab43762ef010967e ("perf: Allow normal events to output AUX data") ... and we should probably return -EINVAL here, as this should only happen when the new event is mis-configured or does not have a compatible aux_event group leader. Fixes: ab43762ef010967e ("perf: Allow normal events to output AUX data") Reported-by: Vince Weaver <[email protected]> Signed-off-by: Mark Rutland <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Ingo Molnar <[email protected]> Acked-by: Alexander Shishkin <[email protected]> Tested-by: Vince Weaver <[email protected]>
2020-01-17net: hns: fix soft lockup when there is not enough memoryYonglong Liu1-3/+1
When there is not enough memory and napi_alloc_skb() return NULL, the HNS driver will print error message, and than try again, if the memory is not enough for a while, huge error message and the retry operation will cause soft lockup. When napi_alloc_skb() return NULL because of no memory, we can get a warn_alloc() call trace, so this patch deletes the error message. We already use polling mode to handle irq, but the retry operation will render the polling weight inactive, this patch just return budget when the rx is not completed to avoid dead loop. Fixes: 36eedfde1a36 ("net: hns: Optimize hns_nic_common_poll for better performance") Fixes: b5996f11ea54 ("net: add Hisilicon Network Subsystem basic ethernet support") Signed-off-by: Yonglong Liu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-17USB: serial: suppress driver bind attributesJohan Hovold1-0/+3
USB-serial drivers must not be unbound from their ports before the corresponding USB driver is unbound from the parent interface so suppress the bind and unbind attributes. Unbinding a serial driver while it's port is open is a sure way to trigger a crash as any driver state is released on unbind while port hangup is handled on the parent USB interface level. Drivers for multiport devices where ports share a resource such as an interrupt endpoint also generally cannot handle individual ports going away. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable <[email protected]> Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-01-17net: avoid updating qdisc_xmit_lock_key in netdev_update_lockdep_key()Cong Wang1-12/+0
syzbot reported some bogus lockdep warnings, for example bad unlock balance in sch_direct_xmit(). They are due to a race condition between slow path and fast path, that is qdisc_xmit_lock_key gets re-registered in netdev_update_lockdep_key() on slow path, while we could still acquire the queue->_xmit_lock on fast path in this small window: CPU A CPU B __netif_tx_lock(); lockdep_unregister_key(qdisc_xmit_lock_key); __netif_tx_unlock(); lockdep_register_key(qdisc_xmit_lock_key); In fact, unlike the addr_list_lock which has to be reordered when the master/slave device relationship changes, queue->_xmit_lock is only acquired on fast path and only when NETIF_F_LLTX is not set, so there is likely no nested locking for it. Therefore, we can just get rid of re-registration of qdisc_xmit_lock_key. Reported-by: [email protected] Fixes: ab92d68fc22f ("net: core: add generic lockdep keys") Cc: Taehee Yoo <[email protected]> Signed-off-by: Cong Wang <[email protected]> Acked-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-17net/sched: act_ife: initalize ife->metalist earlierEric Dumazet1-4/+3
It seems better to init ife->metalist earlier in tcf_ife_init() to avoid the following crash : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 10483 Comm: syz-executor216 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:_tcf_ife_cleanup net/sched/act_ife.c:412 [inline] RIP: 0010:tcf_ife_cleanup+0x6e/0x400 net/sched/act_ife.c:431 Code: 48 c1 ea 03 80 3c 02 00 0f 85 94 03 00 00 49 8b bd f8 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 67 e8 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 5c 03 00 00 48 bb 00 00 00 00 00 fc ff df 48 8b RSP: 0018:ffffc90001dc6d00 EFLAGS: 00010246 RAX: dffffc0000000000 RBX: ffffffff864619c0 RCX: ffffffff815bfa09 RDX: 0000000000000000 RSI: 0000000000000004 RDI: 0000000000000000 RBP: ffffc90001dc6d50 R08: 0000000000000004 R09: fffff520003b8d8e R10: fffff520003b8d8d R11: 0000000000000003 R12: ffffffffffffffe8 R13: ffff8880a79fc000 R14: ffff88809aba0e00 R15: 0000000000000000 FS: 0000000001b51880(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000563f52cce140 CR3: 0000000093541000 CR4: 00000000001406f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: tcf_action_cleanup+0x62/0x1b0 net/sched/act_api.c:119 __tcf_action_put+0xfa/0x130 net/sched/act_api.c:135 __tcf_idr_release net/sched/act_api.c:165 [inline] __tcf_idr_release+0x59/0xf0 net/sched/act_api.c:145 tcf_idr_release include/net/act_api.h:171 [inline] tcf_ife_init+0x97c/0x1870 net/sched/act_ife.c:616 tcf_action_init_1+0x6b6/0xa40 net/sched/act_api.c:944 tcf_action_init+0x21a/0x330 net/sched/act_api.c:1000 tcf_action_add+0xf5/0x3b0 net/sched/act_api.c:1410 tc_ctl_action+0x390/0x488 net/sched/act_api.c:1465 rtnetlink_rcv_msg+0x45e/0xaf0 net/core/rtnetlink.c:5424 netlink_rcv_skb+0x177/0x450 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x1d/0x30 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0x58c/0x7d0 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x91c/0xea0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg+0xd7/0x130 net/socket.c:659 ____sys_sendmsg+0x753/0x880 net/socket.c:2330 ___sys_sendmsg+0x100/0x170 net/socket.c:2384 __sys_sendmsg+0x105/0x1d0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg net/socket.c:2424 [inline] __x64_sys_sendmsg+0x78/0xb0 net/socket.c:2424 do_syscall_64+0xfa/0x790 arch/x86/entry/common.c:294 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 11a94d7fd80f ("net/sched: act_ife: validate the control action inside init()") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Cc: Davide Caratti <[email protected]> Reviewed-by: Davide Caratti <[email protected]> Acked-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-01-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller5-24/+54
Pablo Neira Ayuso says: ==================== Netfilter updates for net The following patchset contains Netfilter fixes for net: 1) Fix use-after-free in ipset bitmap destroy path, from Cong Wang. 2) Missing init netns in entry cleanup path of arp_tables, from Florian Westphal. 3) Fix WARN_ON in set destroy path due to missing cleanup on transaction error. 4) Incorrect netlink sanity check in tunnel, from Florian Westphal. 5) Missing sanity check for erspan version netlink attribute, also from Florian. 6) Remove WARN in nft_request_module() that can be triggered from userspace, from Florian Westphal. 7) Memleak in NFTA_HOOK_DEVS netlink parser, from Dan Carpenter. 8) List poison from commit path for flowtables that are added and deleted in the same batch, from Florian Westphal. 9) Fix NAT ICMP packet corruption, from Eyal Birger. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-01-17locking/rwsem: Fix kernel crash when spinning on RWSEM_OWNER_UNKNOWNWaiman Long1-2/+2
The commit 91d2a812dfb9 ("locking/rwsem: Make handoff writer optimistically spin on owner") will allow a recently woken up waiting writer to spin on the owner. Unfortunately, if the owner happens to be RWSEM_OWNER_UNKNOWN, the code will incorrectly spin on it leading to a kernel crash. This is fixed by passing the proper non-spinnable bits to rwsem_spin_on_owner() so that RWSEM_OWNER_UNKNOWN will be treated as a non-spinnable target. Fixes: 91d2a812dfb9 ("locking/rwsem: Make handoff writer optimistically spin on owner") Reported-by: Christoph Hellwig <[email protected]> Signed-off-by: Waiman Long <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Tested-by: Christoph Hellwig <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2020-01-16io_uring: only allow submit from owning taskJens Axboe1-0/+6
If the credentials or the mm doesn't match, don't allow the task to submit anything on behalf of this ring. The task that owns the ring can pass the file descriptor to another task, but we don't want to allow that task to submit an SQE that then assumes the ring mm and creds if it needs to go async. Cc: [email protected] Suggested-by: Stefan Metzmacher <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-01-16Merge tag 'armsoc-fixes' of ↵Linus Torvalds39-869/+159
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC fixes from Olof Johansson: "I've been sitting on these longer than I meant, so the patch count is a bit higher than ideal for this part of the release. There's also some reverts of double-applied patches that brings the diffstat up a bit. With that said, the biggest changes are: - Revert of duplicate i2c device addition on two Aspeed (BMC) Devicetrees. - Move of two device nodes that got applied to the wrong part of the tree on ASpeed G6. - Regulator fix for Beaglebone X15 (adding 12/5V supplies) - Use interrupts for keys on Amlogic SM1 to avoid missed polls In addition to that, there is a collection of smaller DT fixes: - Power supply assignment fixes for i.MX6 - Fix of interrupt line for magnetometer on i.MX8 Librem5 devkit - Build fixlets (selects) for davinci/omap2+ - More interrupt number fixes for Stratix10, Amlogic SM1, etc. - ... and more similar fixes across different platforms And some non-DT stuff: - optee fix to register multiple shared pages properly - Clock calculation fixes for MMP3 - Clock fixes for OMAP as well" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (42 commits) MAINTAINERS: Add myself as the co-maintainer for Actions Semi platforms ARM: dts: imx7: Fix Toradex Colibri iMX7S 256MB NAND flash support ARM: dts: imx6sll-evk: Remove incorrect power supply assignment ARM: dts: imx6sl-evk: Remove incorrect power supply assignment ARM: dts: imx6sx-sdb: Remove incorrect power supply assignment ARM: dts: imx6qdl-sabresd: Remove incorrect power supply assignment ARM: dts: imx6q-icore-mipi: Use 1.5 version of i.Core MX6DL ARM: omap2plus: select RESET_CONTROLLER ARM: davinci: select CONFIG_RESET_CONTROLLER ARM: dts: aspeed: rainier: Fix fan fault and presence ARM: dts: aspeed: rainier: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Remove duplicate flash nodes ARM: dts: aspeed: tacoma: Remove duplicate i2c busses ARM: dts: aspeed: tacoma: Fix fsi master node ARM: dts: aspeed-g6: Fix FSI master location ARM: dts: mmp3: Fix the TWSI ranges clk: mmp2: Fix the order of timer mux parents ARM: mmp: do not divide the clock rate arm64: dts: rockchip: Fix IR on Beelink A1 optee: Fix multi page dynamic shm pool alloc ...
2020-01-16Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds10-41/+38
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "Second collection of clk fixes for the next release. This one includes a fix for PM on TI SoCs with sysc devices and fixes a bunch of clks that are stuck always enabled on Qualcomm SDM845 SoCs. Allwinner SoCs get the usual set of fixes too, mostly correcting drivers to have the right bits that match the hardware. There's also a Samsung and Tegra fix in here to mark a clk critical and avoid a double free. And finally there's a fix for critical clks that silences a big warning splat about trying to enable a clk that couldn't even be prepared" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: ti: dra7-atl: Remove pm_runtime_irq_safe() clk: qcom: gcc-sdm845: Add missing flag to votable GDSCs clk: sunxi-ng: h6-r: Fix AR100/R_APB2 parent order clk: sunxi-ng: h6-r: Simplify R_APB1 clock definition clk: sunxi-ng: sun8i-r: Fix divider on APB0 clock clk: Don't try to enable critical clocks if prepare failed clk: tegra: Fix double-free in tegra_clk_init() clk: samsung: exynos5420: Keep top G3D clocks enabled clk: sunxi-ng: r40: Allow setting parent rate for external clock outputs clk: sunxi-ng: v3s: Fix incorrect number of hw_clks.
2020-01-16Merge tag 'pm-5.5-rc7' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix a coding mistake in the teo cpuidle governor causing data to be written beyond the last array element (Ikjoon Jang)" * tag 'pm-5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpuidle: teo: Fix intervals[] array indexing bug
2020-01-16MAINTAINERS: Add myself as the co-maintainer for Actions Semi platformsManivannan Sadhasivam1-1/+1
Since I've been doing the maintainership work for couple of cycles, we've decided to add myself as the co-maintainer along with Andreas. Link: https://lore.kernel.org/r/[email protected] Cc: "Andreas Färber" <[email protected]> Signed-off-by: Manivannan Sadhasivam <[email protected]> Acked-by: Andreas Färber <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2020-01-16PM: hibernate: fix crashes with init_on_free=1Alexander Potapenko1-10/+10
Upon resuming from hibernation, free pages may contain stale data from the kernel that initiated the resume. This breaks the invariant inflicted by init_on_free=1 that freed pages must be zeroed. To deal with this problem, make clear_free_pages() also clear the free pages when init_on_free is enabled. Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Reported-by: Johannes Stezenbach <[email protected]> Signed-off-by: Alexander Potapenko <[email protected]> Cc: 5.3+ <[email protected]> # 5.3+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-01-16x86/CPU/AMD: Ensure clearing of SME/SEV features is maintainedTom Lendacky1-2/+2
If the SME and SEV features are present via CPUID, but memory encryption support is not enabled (MSR 0xC001_0010[23]), the feature flags are cleared using clear_cpu_cap(). However, if get_cpu_cap() is later called, these feature flags will be reset back to present, which is not desired. Change from using clear_cpu_cap() to setup_clear_cpu_cap() so that the clearing of the flags is maintained. Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Cc: <[email protected]> # 4.16.x- Link: https://lkml.kernel.org/r/226de90a703c3c0be5a49565047905ac4e94e8f3.1579125915.git.thomas.lendacky@amd.com
2020-01-16Merge tag 'tag-chrome-platform-fixes-for-v5.5-rc7' of ↵Linus Torvalds1-8/+20
git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux Pull chrome platform fix from Benson Leung: "One fix in the wilco_ec keyboard backlight driver to allow the EC driver to continue loading in the absence of a backlight module" * tag 'tag-chrome-platform-fixes-for-v5.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux: platform/chrome: wilco_ec: Fix keyboard backlight probing
2020-01-16USB: serial: option: add support for Quectel RM500Q in QDL modeReinhard Speyerer1-0/+2
Add support for Quectel RM500Q in QDL mode. T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 24 Spd=480 MxCh= 0 D: Ver= 2.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=0800 Rev= 0.00 S: Manufacturer=Qualcomm CDMA Technologies MSM S: Product=QUSB_BULK_SN:xxxxxxxx S: SerialNumber=xxxxxxxx C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 2mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=10 Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms It is assumed that the ZLP flag required for other Qualcomm-based 5G devices also applies to Quectel RM500Q. Signed-off-by: Reinhard Speyerer <[email protected]> Cc: stable <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2020-01-16reiserfs: fix handling of -EOPNOTSUPP in reiserfs_for_each_xattrJeff Mahoney1-2/+6
Commit 60e4cf67a58 (reiserfs: fix extended attributes on the root directory) introduced a regression open_xa_root started returning -EOPNOTSUPP but it was not handled properly in reiserfs_for_each_xattr. When the reiserfs module is built without CONFIG_REISERFS_FS_XATTR, deleting an inode would result in a warning and chowning an inode would also result in a warning and then fail to complete. With CONFIG_REISERFS_FS_XATTR enabled, the xattr root would always be present for read-write operations. This commit handles -EOPNOSUPP in the same way -ENODATA is handled. Fixes: 60e4cf67a582 ("reiserfs: fix extended attributes on the root directory") CC: [email protected] # Commit 60e4cf67a58 was picked up by stable Link: https://lore.kernel.org/r/[email protected] Reported-by: Michael Brunnbauer <[email protected]> Signed-off-by: Jeff Mahoney <[email protected]> Signed-off-by: Jan Kara <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.