aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-07-26mm: use vma_init() to initialize VMAs on stack and data segmentsKirill A. Shutemov10-7/+17
Make sure to initialize all VMAs properly, not only those which come from vm_area_cachep. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Kirill A. Shutemov <[email protected]> Acked-by: Linus Torvalds <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-07-26mm: introduce vma_init()Kirill A. Shutemov2-4/+8
Not all VMAs allocated with vm_area_alloc(). Some of them allocated on stack or in data segment. The new helper can be use to initialize VMA properly regardless where it was allocated. Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Kirill A. Shutemov <[email protected]> Acked-by: Linus Torvalds <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: Dmitry Vyukov <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-07-26mm: fix exports that inadvertently make put_page() EXPORT_SYMBOL_GPLDan Williams1-2/+2
Commit e76384884344 ("mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS") added two EXPORT_SYMBOL_GPL() symbols, but these symbols are required by the inlined put_page(), thus accidentally making put_page() a GPL export only. This breaks OpenAFS (at least). Mark them EXPORT_SYMBOL() instead. Link: http://lkml.kernel.org/r/153128611970.2928.11310692420711601254.stgit@dwillia2-desk3.amr.corp.intel.com Fixes: e76384884344 ("mm: introduce MEMORY_DEVICE_FS_DAX and CONFIG_DEV_PAGEMAP_OPS") Signed-off-by: Dan Williams <[email protected]> Reported-by: Joe Gorse <[email protected]> Reported-by: John Hubbard <[email protected]> Tested-by: Joe Gorse <[email protected]> Tested-by: John Hubbard <[email protected]> Cc: Jérôme Glisse <[email protected]> Cc: Mark Vitale <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-07-26ipc/sem.c: prevent queue.status tearing in semopDavidlohr Bueso1-1/+1
In order for load/store tearing prevention to work, _all_ accesses to the variable in question need to be done around READ and WRITE_ONCE() macros. Ensure everyone does so for q->status variable for semtimedop(). Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Davidlohr Bueso <[email protected]> Cc: Manfred Spraul <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-07-26mm: disallow mappings that conflict for devm_memremap_pages()Dave Jiang1-1/+17
When pmem namespaces created are smaller than section size, this can cause an issue during removal and gpf was observed: general protection fault: 0000 1 SMP PTI CPU: 36 PID: 3941 Comm: ndctl Tainted: G W 4.14.28-1.el7uek.x86_64 #2 task: ffff88acda150000 task.stack: ffffc900233a4000 RIP: 0010:__put_page+0x56/0x79 Call Trace: devm_memremap_pages_release+0x155/0x23a release_nodes+0x21e/0x260 devres_release_all+0x3c/0x48 device_release_driver_internal+0x15c/0x207 device_release_driver+0x12/0x14 unbind_store+0xba/0xd8 drv_attr_store+0x27/0x31 sysfs_kf_write+0x3f/0x46 kernfs_fop_write+0x10f/0x18b __vfs_write+0x3a/0x16d vfs_write+0xb2/0x1a1 SyS_write+0x55/0xb9 do_syscall_64+0x79/0x1ae entry_SYSCALL_64_after_hwframe+0x3d/0x0 Add code to check whether we have a mapping already in the same section and prevent additional mappings from being created if that is the case. Link: http://lkml.kernel.org/r/152909478401.50143.312364396244072931.stgit@djiang5-desk3.ch.intel.com Signed-off-by: Dave Jiang <[email protected]> Cc: Dan Williams <[email protected]> Cc: Robert Elliott <[email protected]> Cc: Jeff Moyer <[email protected]> Cc: Matthew Wilcox <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-07-26kasan: only select SLUB_DEBUG with SYSFS=yArnd Bergmann1-1/+1
Building with KASAN and SLUB but without sysfs now results in a build-time error: WARNING: unmet direct dependencies detected for SLUB_DEBUG Depends on [n]: SLUB [=y] && SYSFS [=n] Selected by [y]: - KASAN [=y] && HAVE_ARCH_KASAN [=y] && (SLUB [=y] || SLAB [=n] && !DEBUG_SLAB [=n]) && SLUB [=y] mm/slub.c:4565:12: error: 'list_locations' defined but not used [-Werror=unused-function] static int list_locations(struct kmem_cache *s, char *buf, ^~~~~~~~~~~~~~ mm/slub.c:4406:13: error: 'validate_slab_cache' defined but not used [-Werror=unused-function] static long validate_slab_cache(struct kmem_cache *s) This disallows that broken configuration in Kconfig. Link: http://lkml.kernel.org/r/[email protected] Fixes: dd275caf4a0d ("kasan: depend on CONFIG_SLUB_DEBUG") Signed-off-by: Arnd Bergmann <[email protected]> Cc: "Jason A. Donenfeld" <[email protected]> Cc: Arnd Bergmann <[email protected]> Cc: Shakeel Butt <[email protected]> Cc: Andrey Ryabinin <[email protected]> Cc: Christoph Lameter <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-07-26delayacct: fix crash in delayacct_blkio_end() after delayacct init failureTejun Heo1-1/+1
While forking, if delayacct init fails due to memory shortage, it continues expecting all delayacct users to check task->delays pointer against NULL before dereferencing it, which all of them used to do. Commit c96f5471ce7d ("delayacct: Account blkio completion on the correct task"), while updating delayacct_blkio_end() to take the target task instead of always using %current, made the function test NULL on %current->delays and then continue to operated on @p->delays. If %current succeeded init while @p didn't, it leads to the following crash. BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: __delayacct_blkio_end+0xc/0x40 PGD 8000001fd07e1067 P4D 8000001fd07e1067 PUD 1fcffbb067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 4 PID: 25774 Comm: QIOThread0 Not tainted 4.16.0-9_fbk1_rc2_1180_g6b593215b4d7 #9 RIP: 0010:__delayacct_blkio_end+0xc/0x40 Call Trace: try_to_wake_up+0x2c0/0x600 autoremove_wake_function+0xe/0x30 __wake_up_common+0x74/0x120 wake_up_page_bit+0x9c/0xe0 mpage_end_io+0x27/0x70 blk_update_request+0x78/0x2c0 scsi_end_request+0x2c/0x1e0 scsi_io_completion+0x20b/0x5f0 blk_mq_complete_request+0xa2/0x100 ata_scsi_qc_complete+0x79/0x400 ata_qc_complete_multiple+0x86/0xd0 ahci_handle_port_interrupt+0xc9/0x5c0 ahci_handle_port_intr+0x54/0xb0 ahci_single_level_irq_intr+0x3b/0x60 __handle_irq_event_percpu+0x43/0x190 handle_irq_event_percpu+0x20/0x50 handle_irq_event+0x2a/0x50 handle_edge_irq+0x80/0x1c0 handle_irq+0xaf/0x120 do_IRQ+0x41/0xc0 common_interrupt+0xf/0xf Fix it by updating delayacct_blkio_end() check @p->delays instead. Link: http://lkml.kernel.org/r/[email protected] Fixes: c96f5471ce7d ("delayacct: Account blkio completion on the correct task") Signed-off-by: Tejun Heo <[email protected]> Reported-by: Dave Jones <[email protected]> Debugged-by: Dave Jones <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: Josh Snyder <[email protected]> Cc: <[email protected]> [4.15+] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-07-27Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie58-292/+1933
into drm-next Updates for 4.19. Mostly bug fixes and cleanups. Highlights: - Internal API cleanup in GPU scheduler - Decouple i2c and aux abstractions in DC - Update maintainers - Misc cleanups - Misc bug fixes Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-27Merge tag 'exynos-drm-next-for-v4.19' of ↵Dave Airlie24-548/+324
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Cleanups - Change g2d driver to component based driver . g2d driver was last customed sub driver so this patch series changes it to component based driver, which also makes gem handling to be more simplify. - Cleanup of Exynos DRM suspend/resume . Register exynos drm core suspend/resume functions to prepare/complete callbacks of dev_pm_ops instead of suspend/resume callbacks to ensure exynos_drm_suspend() is called before any suspend callback from the real devices to avoid some issues on boards with complex pipelines. . Also Add pm_runtime_furce_suspend/resume as SYSTEM_SLEEP_PM_OPS to ensure that resources of each devices will be released for the system PM suspend/resume cycle. - Remove local value not used. Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-27Merge branch 'for-upstream/malidp-fixes' of git://linux-arm.org/linux-ld ↵Dave Airlie2-1/+11
into drm-next I have a couple of small patches for malidp to be applied in drm-next. They have arisen from the decision to switch the writeback connectors to always connected. Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-27Merge tag 'imx-drm-next-2018-07-20' of ↵Dave Airlie6-19/+53
git://git.pengutronix.de/git/pza/linux into drm-next drm/imx: cleanup and csi improvements - Remove the unused struct imx_drm_crtc and the unused pipes field from imx_drm_device and replace drm_dev_unref with drm_dev_put. - Extend CSI configuration to support RGB888 and BGR888 capture, as well as 16-bit RGB565 capture via a parallel bus. - Add CPMEM support for negative interlace offsets, which is necessary to support writing captured bottom-top interlaced fields to memory with interleaved lines. Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-27Merge tag 'imx-drm-fixes-2018-07-20' of ↵Dave Airlie2-4/+8
git://git.pengutronix.de/git/pza/linux into drm-fixes drm/imx: imx-drm ldb and ipu-v3 csi fixes - Disable the LVDS Display Bridge (LDB) on driver bind. This is necessary to guarantee correct LVDS signals in case the bootloader left the LVDS output active. - Remove false positive warning about disabled second LVDS channel in dual-channel mode. In this mode, the second LVDS channel can not be used separately. If the second channel is correctly described as disabled in the device tree, the driver warned about this anyway. - Fix the CSI confiuration to not only enable interlaced capture mode for V4L2_FIELD_SEQ_BT and V4L2_FIELD_SEQ_TB, but also for the V4L2_FIELD_ALTERNATE interlacing mode. Before, it incorrectly tried to capture progressive frames in that case. Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-27Merge tag 'drm-intel-fixes-2018-07-26' of ↵Dave Airlie4-5/+33
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Only a quirk for GLK NUC HDMI port issues Signed-off-by: Dave Airlie <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-07-26block: bio_iov_iter_get_pages: pin more pages for multi-segment IOsMartin Wilck1-3/+32
bio_iov_iter_get_pages() currently only adds pages for the next non-zero segment from the iov_iter to the bio. That's suboptimal for callers, which typically try to pin as many pages as fit into the bio. This patch converts the current bio_iov_iter_get_pages() into a static helper, and introduces a new helper that allocates as many pages as 1) fit into the bio, 2) are present in the iov_iter, 3) and can be pinned by MM. Error is returned only if zero pages could be pinned. Because of 3), a zero return value doesn't necessarily mean all pages have been pinned. Callers that have to pin every page in the iov_iter must still call this function in a loop (this is currently the case). This change matters most for __blkdev_direct_IO_simple(), which calls bio_iov_iter_get_pages() only once. If it obtains less pages than requested, it returns a "short write" or "short read", and __generic_file_write_iter() falls back to buffered writes, which may lead to data corruption. Fixes: 72ecad22d9f1 ("block: support a full bio worth of IO for simplified bdev direct-io") Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Martin Wilck <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-07-26blkdev: __blkdev_direct_IO_simple: fix leak in error caseMartin Wilck1-4/+5
Fixes: 72ecad22d9f1 ("block: support a full bio worth of IO for simplified bdev direct-io") Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Martin Wilck <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-07-26block: bio_iov_iter_get_pages: fix size of last iovecMartin Wilck1-10/+8
If the last page of the bio is not "full", the length of the last vector slot needs to be corrected. This slot has the index (bio->bi_vcnt - 1), but only in bio->bi_io_vec. In the "bv" helper array, which is shifted by the value of bio->bi_vcnt at function invocation, the correct index is (nr_pages - 1). v2: improved readability following suggestions from Ming Lei. v3: followed a formatting suggestion from Christoph Hellwig. Fixes: 2cefe4dbaadf ("block: add bio_iov_iter_get_pages()") Reviewed-by: Hannes Reinecke <[email protected]> Reviewed-by: Ming Lei <[email protected]> Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Martin Wilck <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-07-26Merge branch 'nvme-4.18' of git://git.infradead.org/nvme into for-linusJens Axboe8-19/+55
Pull NVMe fixes from Christoph: "Two small fixes each for the FC code and the target." * 'nvme-4.18' of git://git.infradead.org/nvme: nvmet: only check for filebacking on -ENOTBLK nvmet: fixup crash on NULL device path nvme: if_ready checks to fail io to deleting controller nvmet-fc: fix target sgl list on large transfers
2018-07-26PCI/AER: Work around use-after-free in pcie_do_fatal_recovery()Thomas Tai1-0/+2
When an fatal error is received by a non-bridge device, the device is removed, and pci_stop_and_remove_bus_device() deallocates the device structure. The freed device structure is used by subsequent code to send uevents and print messages. Hold a reference on the device until we're finished using it. This is not an ideal fix because pcie_do_fatal_recovery() should not use the device at all after removing it, but that's too big a project for right now. Fixes: 7e9084b36740 ("PCI/AER: Handle ERR_FATAL with removal and re-enumeration of devices") Signed-off-by: Thomas Tai <[email protected]> [bhelgaas: changelog, reduce get/put coverage] Signed-off-by: Bjorn Helgaas <[email protected]>
2018-07-26Merge tag 'usb-4.18-rc7' of ↵Linus Torvalds25-135/+187
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are a number of USB fixes and new device ids for 4.18-rc7. The largest number are a bunch of gadget driver fixes that got delayed in being submitted earlier due to vacation schedules, but nothing really huge is present in them. There are some new device ids and some PHY driver fixes that were connected to some USB ones. Full details are in the shortlog. All have been in linux-next for a while with no reported issues" * tag 'usb-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (28 commits) usb: core: handle hub C_PORT_OVER_CURRENT condition usb: xhci: Fix memory leak in xhci_endpoint_reset() usb: typec: tcpm: Fix sink PDO starting index for PPS APDO selection usb: gadget: f_fs: Only return delayed status when len is 0 usb: gadget: f_uac2: fix endianness of 'struct cntrl_*_lay3' usb: dwc2: Fix inefficient copy of unaligned buffers usb: dwc2: Fix DMA alignment to start at allocated boundary usb: dwc3: rockchip: Fix PHY documentation links. tools: usb: ffs-test: Fix build on big endian systems usb: gadget: aspeed: Workaround memory ordering issue usb: dwc3: gadget: remove redundant variable maxpacket usb: dwc2: avoid NULL dereferences usb/phy: fix PPC64 build errors in phy-fsl-usb.c usb: dwc2: host: do not delay retries for CONTROL IN transfers usb: gadget: u_audio: protect stream runtime fields with stream spinlock usb: gadget: u_audio: remove cached period bytes value usb: gadget: u_audio: remove caching of stream buffer parameters usb: gadget: u_audio: update hw_ptr in iso_complete after data copied usb: gadget: u_audio: fix pcm/card naming in g_audio_setup() usb: gadget: f_uac2: fix error handling in afunc_bind (again) ...
2018-07-26Merge tag 'staging-4.18-rc7' of ↵Linus Torvalds5-101/+171
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging Pull staging driver fixes from Greg KH: "Here are three small staging driver fixes for 4.18-rc7. One is a revert of an earlier patch that turned out to be incorrect, one is a fix for the speakup drivers, and the last a fix for the ks7010 driver to resolve a regression. All of these have been in linux-next for a while with no reported issues" * tag 'staging-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: staging: speakup: fix wraparound in uaccess length check staging: ks7010: call 'hostif_mib_set_request_int' instead of 'hostif_mib_set_request_bool' Revert "staging:r8188eu: Use lib80211 to support TKIP"
2018-07-26Merge tag 'driver-core-4.18-rc7' of ↵Linus Torvalds1-8/+0
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fix from Greg KH: "This is a single driver core fix for 4.18-rc7. It partially reverts a previous commit to resolve some reported issues. It has been in linux-next for a while now with no reported issues" * tag 'driver-core-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: driver core: Partially revert "driver core: correct device's shutdown order"
2018-07-26Merge tag 'acpi-4.18-rc7' of ↵Linus Torvalds1-0/+26
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix a recent ACPICA regression causing the AML parser to get confused and fail in some situations involving incorrect AML in an ACPI table (Erik Schmauss)" * tag 'acpi-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPICA: AML Parser: ignore dispatcher error status during table load
2018-07-26Merge tag 'pm-4.18-rc7' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management fix from Rafael Wysocki: "Fix up the recently introduced cpufreq driver for Qualcomm Kryo processors by adding a terminating NULL entry to its table of device IDs (YueHaibing)" * tag 'pm-4.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: cpufreq: qcom-kryo: add NULL entry to the end of_device_id array
2018-07-26drm/msm: rework vblank event handling in dpu_crtcRajesh Yadav1-1/+14
The vblank on/off calls were missing in dpu_crtc leading to "driver forgot to call drm_crtc_vblank_off()" warning while entering suspend state. Also handle the state update completion event for a crtc being disabled in current atomic commit. This patch depends on https://www.spinics.net/lists/dri-devel/msg182402.html Signed-off-by: Rajesh Yadav <[email protected]> Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm: Add SDM845 DPU supportJeykumar Sankaran64-15/+31913
SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a top level wrapper consisting of Display Processing Unit (DPU) and display peripheral modules such as Display Serial Interface (DSI) and DisplayPort (DP). MDSS functions essentially as a back-end composition engine. It blends video and graphic images stored in the frame buffers and scans out the composed image to a display sink (over DSI/DP). The following diagram represents hardware blocks for a simple pipeline (two planes are present on a given crtc which is connected to a DSI connector): MDSS +---------------------------------+ | +-----------------------------+ | | | DPU | | | | +--------+ +--------+ | | | | | SSPP | | SSPP | | | | | +----+---+ +----+---+ | | | | | | | | | | +----v-----------v---+ | | | | | Layer Mixer (LM) | | | | | +--------------------+ | | | | +--------------------+ | | | | | PingPong (PP) | | | | | +--------------------+ | | | | +--------------------+ | | | | | INTERFACE (VIDEO) | | | | | +---+----------------+ | | | +------|----------------------+ | | | | | +------|---------------------+ | | | | DISPLAY PERIPHERALS | | | | +---v-+ +-----+ | | | | | DSI | | DP | | | | | +-----+ +-----+ | | | +----------------------------+ | +---------------------------------+ The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs) depends on SoC capabilities. Overview of DPU sub-blocks: --------------------------- * Source Surface Processor (SSPP): Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are capable of performing format conversion, scaling and quality improvement for source surfaces. * Layer Mixer (LM): Blend source surfaces together (in requested zorder) * PingPong (PP): This block controls frame done interrupt output, EOL and EOF generation, overflow/underflow control. * Display interface (INTF): Timing generator and interface connecting the display peripherals. DRM components mapping to DPU architecture: ------------------------------------------ PLANEs maps to SSPPs CRTC maps to LMs Encoder maps to PPs, INTFs Data flow setup: --------------- MDSS hardware can support various data flows (e.g.): - Dual pipe: Output from two LMs combined to single display. - Split display: Output from two LMs connected to two separate interfaces. The hardware capabilities determine the number of concurrent data paths possible. Any control path (i.e. pipeline w/i DPU) can be routed to any of the hardware data paths. A given control path can be triggered, flushed and controlled independently. Changes in v3: - Move msm_media_info.h from uapi to dpu/ subdir - Remove preclose callback dpu (it's handled in core) - Fix kbuild warnings with parent_ops - Remove unused functions from dpu_core_irq - Rename mdss_phys to mdss - Rename mdp_phys address space to mdp - Drop _phys from vbif and regdma binding names Signed-off-by: Abhinav Kumar <[email protected]> Signed-off-by: Archit Taneja <[email protected]> Signed-off-by: Chandan Uddaraju <[email protected]> Signed-off-by: Jeykumar Sankaran <[email protected]> Signed-off-by: Jordan Crouse <[email protected]> Signed-off-by: Rajesh Yadav <[email protected]> Signed-off-by: Sravanthi Kollukuduru <[email protected]> Signed-off-by: Sean Paul <[email protected]> [robclark minor rebase] Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm: Add pm_suspend/resume callbacks to msm_kmsJeykumar Sankaran2-0/+13
Used by the dpu driver for custom suspend/resume. Changes in v3: - None Signed-off-by: Jeykumar Sankaran <[email protected]> [seanpaul split this out of the megapatch] Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm: Add .commit() callback to msm_kms functionsJeykumar Sankaran2-0/+6
Called right before wait_for_commit_done() to perform kickoff for active crtcs. Changes in v3: - None Signed-off-by: Jeykumar Sankaran <[email protected]> [seanpaul split this out of the megapatch] Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm: #define MAX_<OBJECT> in msm_drv.hJeykumar Sankaran1-5/+11
dpu uses these elsewhere in the driver (in addition to increasing MAX_PLANES, that'll come later), so pull them out into #define. Changes in v3: - None Signed-off-by: Jeykumar Sankaran <[email protected]> [seanpaul pulled this out of the dpu megapatch] Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm: Use labels for unwinding in the error pathJeykumar Sankaran1-22/+22
This simplifies cleanup, to make sure nothing drops out in case of error. Changes in v3: - None Signed-off-by: Jeykumar Sankaran <[email protected]> [seanpaul split out of dpu megapatch and renamed labels] Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm: #define MDP version numbersJeykumar Sankaran1-4/+7
Useful for incoming DPU support Changes in v3: - None Signed-off-by: Jeykumar Sankaran <[email protected]> [seanpaul split this from the dpu megapatch] Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm: Clean up dangling atomic_wqSean Paul2-5/+0
I missed this during the atomic conversion Changes in v3: - None Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm: higher values of pclk can exceed 32 bits when multiplied by a factorAbhinav Kumar1-2/+5
Make the pclk_rate u64 to accommodate higher pixel clock rates. Changes in v3: - Converted pclk_rate to u32 (Archit) - Rebase on dsi cleanup set in msm-next Cc: Sibi Sankar <[email protected]> Cc: Archit Taneja <[email protected]> Signed-off-by: Abhinav Kumar <[email protected]> Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm: enable zpos normalizationJeykumar Sankaran1-0/+3
Enable drm core zpos normalization for planes. Changes in v3: - None Signed-off-by: Jeykumar Sankaran <[email protected]> Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm/mdp5: subclass msm_mdss for mdp5Rajesh Yadav3-84/+109
SoCs having mdp5 or dpu have identical tree like device hierarchy where MDSS top level wrapper manages common power resources for all child devices. Subclass msm_mdss so that msm_mdss includes common defines and mdp5/dpu mdss derivations to include any extensions. Add mdss helper interface (msm_mdss_funcs) to msm_mdss base for mdp5/dpu mdss specific implementation calls. This change subclasses msm_mdss for mdp5, dpu specific changes will be done separately. Changes in v3: - Added Archit's R-b Reviewed-by: Archit Taneja <[email protected]> Reviewed-by: Sean Paul <[email protected]> Signed-off-by: Rajesh Yadav <[email protected]> [seanpaul rebased on msm-next and resolved conflicts] Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm: Move wait_for_vblanks into mdp complete_commit() hooksSean Paul3-2/+4
DPU doesn't use this, so push it into the mdp drivers. Changes in v3: - None Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rajesh Yadav <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm/dsi: set encoder mode for DRM bridge explicitlyAbhinav Kumar1-2/+4
Currently, DRM bridge for DPU relies on the default video mode setting to set the encoder mode. Add an explicit call to set the encoder mode for bridges. Changes in v3: - None Reviewed-by: Archit Taneja <[email protected]> Signed-off-by: Abhinav Kumar <[email protected]> Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm/dsi: initialize postdiv_lock before use for 10nm pllRajesh Yadav1-0/+2
postdiv_lock spinlock was used before initialization for 10nm pll. It causes following spin_bug: "BUG: spinlock bad magic on CPU#0". Initialize spinlock before its usage. Changes in v3: - Added Archit's R-b Reviewed-by: Archit Taneja <[email protected]> Signed-off-by: Rajesh Yadav <[email protected]> Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm/dsi: Use one connector for dual DSI modeChandan Uddaraju3-86/+30
Current DSI driver uses two connectors for dual DSI case even though we only have one panel. Fix this by implementing one connector/bridge for dual DSI use case. Use master DSI controllers to register one connector/bridge. Changes in v3: - None Reviewed-by: Archit Taneja <[email protected]> Signed-off-by: Chandan Uddaraju <[email protected]> [seanpaul removed unused local var causing a build warning] Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm/msm/dsi: adjust dsi timing for dual dsi modeChandan Uddaraju4-20/+64
For dual dsi mode, the horizontal timing needs to be divided by half since both the dsi controllers will be driving this panel. Adjust the pixel clock and DSI timing accordingly. Changes in v3: - Added Archit's R-b - Rebase on dsi cleanup set in msm-next Cc: Sibi Sankar <[email protected]> Reviewed-by: Archit Taneja <[email protected]> Signed-off-by: Chandan Uddaraju <[email protected]> Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26drm: add msm compressed format modifiersJeykumar Sankaran1-0/+13
Qualcomm Snapdragon chipsets uses compressed format to optimize BW across multiple IP's. This change adds needed modifier support in drm for a simple 4x4 tile based compressed variants of base formats. Changes in v3: - Removed duplicate entry for DRM_FORMAT_MOD_QCOM_COMPRESSED (Rob Clark) Changes in v4: - Remove all modifiers aside from COMPRESSED, this includes tiled and 10-bit Signed-off-by: Jeykumar Sankaran <[email protected]> Signed-off-by: Sean Paul <[email protected]> Signed-off-by: Rob Clark <[email protected]>
2018-07-26kthread, tracing: Don't expose half-written comm when creating kthreadsSnild Dolkow1-1/+7
There is a window for racing when printing directly to task->comm, allowing other threads to see a non-terminated string. The vsnprintf function fills the buffer, counts the truncated chars, then finally writes the \0 at the end. creator other vsnprintf: fill (not terminated) count the rest trace_sched_waking(p): ... memcpy(comm, p->comm, TASK_COMM_LEN) write \0 The consequences depend on how 'other' uses the string. In our case, it was copied into the tracing system's saved cmdlines, a buffer of adjacent TASK_COMM_LEN-byte buffers (note the 'n' where 0 should be): crash-arm64> x/1024s savedcmd->saved_cmdlines | grep 'evenk' 0xffffffd5b3818640: "irq/497-pwr_evenkworker/u16:12" ...and a strcpy out of there would cause stack corruption: [224761.522292] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffff9bf9783c78 crash-arm64> kbt | grep 'comm\|trace_print_context' #6 0xffffff9bf9783c78 in trace_print_context+0x18c(+396) comm (char [16]) = "irq/497-pwr_even" crash-arm64> rd 0xffffffd4d0e17d14 8 ffffffd4d0e17d14: 2f71726900000000 5f7277702d373934 ....irq/497-pwr_ ffffffd4d0e17d24: 726f776b6e657665 3a3631752f72656b evenkworker/u16: ffffffd4d0e17d34: f9780248ff003231 cede60e0ffffff9b 12..H.x......`.. ffffffd4d0e17d44: cede60c8ffffffd4 00000fffffffffd4 .....`.......... The workaround in e09e28671 (use strlcpy in __trace_find_cmdline) was likely needed because of this same bug. Solved by vsnprintf:ing to a local buffer, then using set_task_comm(). This way, there won't be a window where comm is not terminated. Link: http://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: bc0c38d139ec7 ("ftrace: latency tracer infrastructure") Reviewed-by: Steven Rostedt (VMware) <[email protected]> Signed-off-by: Snild Dolkow <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2018-07-25tracing: Quiet gcc warning about maybe unused link variableSteven Rostedt (VMware)1-2/+4
Commit 57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure") added an if statement that depends on another if statement that gcc doesn't see will initialize the "link" variable and gives the warning: "warning: 'link' may be used uninitialized in this function" It is really a false positive, but to quiet the warning, and also to make sure that it never actually is used uninitialized, initialize the "link" variable to NULL and add an if (!WARN_ON_ONCE(!link)) where the compiler thinks it could be used uninitialized. Cc: [email protected] Fixes: 57ea2a34adf4 ("tracing/kprobes: Fix trace_probe flags on enable_trace_kprobe() failure") Reported-by: kbuild test robot <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2018-07-25tracing: Fix possible double free in event_enable_trigger_func()Steven Rostedt (VMware)1-1/+5
There was a case that triggered a double free in event_trigger_callback() due to the called reg() function freeing the trigger_data and then it getting freed again by the error return by the caller. The solution there was to up the trigger_data ref count. Code inspection found that event_enable_trigger_func() has the same issue, but is not as easy to trigger (requires harder to trigger failures). It needs to be solved slightly different as it needs more to clean up when the reg() function fails. Link: http://lkml.kernel.org/r/[email protected] Cc: [email protected] Fixes: 7862ad1846e99 ("tracing: Add 'enable_event' and 'disable_event' event trigger commands") Reivewed-by: Masami Hiramatsu <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2018-07-25drm/i915/glk: Add Quirk for GLK NUC HDMI port issues.Clint Taylor4-5/+33
On GLK NUC platforms the HDMI retiming buffer needs additional disabled time to correctly sync to a faster incoming signal. When measured on a scope the highspeed lines of the HDMI clock turn off for ~400uS during a normal resolution change. The HDMI retimer on the GLK NUC appears to require at least a full frame of quiet time before a new faster clock can be correctly sync'd. Wait 100ms due to msleep inaccuracies while waiting for a completed frame. Add a quirk to the driver for GLK boards that use ITE66317 HDMI retimers. V2: Add more devices to the quirk list V3: Delay increased to 100ms, check to confirm crtc type is HDMI. V4: crtc type check extended to include _DDI and whitespace fixes v5: Fix white spaces, remove the macro for delay. Revert the crtc type check introduced in v4. Cc: Imre Deak <[email protected]> Cc: <[email protected]> # v4.14+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105887 Signed-off-by: Clint Taylor <[email protected]> Tested-by: Daniel Scheller <[email protected]> Signed-off-by: Radhakrishna Sripada <[email protected]> Signed-off-by: Imre Deak <[email protected]> Reviewed-by: Imre Deak <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 90c3e2198777aaa355b6994a31a79c636c8d4306) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-07-25gpu: drm: amdgpu: Replace mdelay with msleep in cik_pcie_gen3_enable()Jia-Ju Bai1-1/+1
cik_pcie_gen3_enable() is only called by cik_common_hw_init(), which is never called in atomic context. cik_pcie_gen3_enable() calls mdelay() to busily wait, which is not necessary. mdelay() can be replaced with msleep(). This is found by a static analysis tool named DCNS written by myself. Signed-off-by: Jia-Ju Bai <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-25drm/amdgpu/gmc9: clarify GPUVM fault error messageAlex Deucher1-1/+1
The address printed is the actual address, not the page. Reviewed-by: Junwei Zhang <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-25drm/scheduler: remove sched field from the entityNayan Deshmukh6-19/+16
The scheduler of the entity is decided by the run queue on which it is queued. This patch avoids us the effort required to maintain a sync between rq and sched field when we start shifting entites among different rqs. Signed-off-by: Nayan Deshmukh <[email protected]> Reviewed-by: Christian König <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-25drm/scheduler: modify API to avoid redundancyNayan Deshmukh13-42/+30
entity has a scheduler field and we don't need the sched argument in any of the functions where entity is provided. Signed-off-by: Nayan Deshmukh <[email protected]> Reviewed-by: Christian König <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-25drm/amdgpu: reduce the number of placements for a BOChristian König2-1/+4
Make struct amdgpu_bo a bit smaller. Signed-off-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-07-25drm/amdgpu: consistenly name amdgpu_bo_ functionsChristian König10-38/+39
Just rename functions, no functional change. Signed-off-by: Christian König <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.