aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-06-19x86/asm/64: Align start of __clear_user() loop to 16-bytesMatt Fleming1-0/+1
x86 CPUs can suffer severe performance drops if a tight loop, such as the ones in __clear_user(), straddles a 16-byte instruction fetch window, or worse, a 64-byte cacheline. This issues was discovered in the SUSE kernel with the following commit, 1153933703d9 ("x86/asm/64: Micro-optimize __clear_user() - Use immediate constants") which increased the code object size from 10 bytes to 15 bytes and caused the 8-byte copy loop in __clear_user() to be split across a 64-byte cacheline. Aligning the start of the loop to 16-bytes makes this fit neatly inside a single instruction fetch window again and restores the performance of __clear_user() which is used heavily when reading from /dev/zero. Here are some numbers from running libmicro's read_z* and pread_z* microbenchmarks which read from /dev/zero: Zen 1 (Naples) libmicro-file 5.7.0-rc6 5.7.0-rc6 5.7.0-rc6 revert-1153933703d9+ align16+ Time mean95-pread_z100k 9.9195 ( 0.00%) 5.9856 ( 39.66%) 5.9938 ( 39.58%) Time mean95-pread_z10k 1.1378 ( 0.00%) 0.7450 ( 34.52%) 0.7467 ( 34.38%) Time mean95-pread_z1k 0.2623 ( 0.00%) 0.2251 ( 14.18%) 0.2252 ( 14.15%) Time mean95-pread_zw100k 9.9974 ( 0.00%) 6.0648 ( 39.34%) 6.0756 ( 39.23%) Time mean95-read_z100k 9.8940 ( 0.00%) 5.9885 ( 39.47%) 5.9994 ( 39.36%) Time mean95-read_z10k 1.1394 ( 0.00%) 0.7483 ( 34.33%) 0.7482 ( 34.33%) Note that this doesn't affect Haswell or Broadwell microarchitectures which seem to avoid the alignment issue by executing the loop straight out of the Loop Stream Detector (verified using perf events). Fixes: 1153933703d9 ("x86/asm/64: Micro-optimize __clear_user() - Use immediate constants") Signed-off-by: Matt Fleming <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Cc: <[email protected]> # v4.19+ Link: https://lkml.kernel.org/r/[email protected]
2020-06-19dm zoned: Fix reclaim zone selectionShin'ichiro Kawasaki1-2/+2
When dm zoned has multiple devices, random zones are never selected for reclaim if all reserved sequential write zones are in use and no sequential write required zones can be selected for reclaim. This can lead to deadlocks as selecting a cache zone allows reclaiming a sequential zone, ensuring forward progress. Fix this by always defaulting to selecting a random zone when no sequential write required zone can be selected. [Damien: fix commit message] Signed-off-by: Shin'ichiro Kawasaki <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-06-19dm zoned: Fix random zone reclaim selectionDamien Le Moal1-8/+27
Commit 2094045fe5b5 ("dm zoned: prefer full zones for reclaim") modified dmz_get_rnd_zone_for_reclaim() to add a search for the buffer zone with the heaviest weight as an optimal candidate for reclaim. This modification uses the zone pointer variabl "last" which is set only once and never modified as zones are scanned, resulting in the search being inefective. Furthermore, if the selected buffer zone at the end of the search loop is active or already locked for reclaim, dmz_get_rnd_zone_for_reclaim() returns NULL even if other random zones with a lesser weight can be reclaimed. To fix the search and to guarantee that reclaim can make forward progress, fix dmz_get_rnd_zone_for_reclaim() loop to correctly find the buffer zone with the heaviest weight using the variable maxw_z. Also make sure to fallback to finding the first random zone that can be reclaimed if this best candidate zone cannot be reclaimed. While at it, also fix the device index check to consider only random zones, ignoring cache zones belonging to the cache device if one is used as that device does not have a reclaim process. Fixes: 2094045fe5b5 ("dm zoned: prefer full zones for reclaim") Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Hannes Reinecke <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-06-19dm: update original bio sector on Zone AppendJohannes Thumshirn1-0/+13
Naohiro reported that issuing zone-append bios to a zoned block device underneath a dm-linear device does not work as expected. This because we forgot to reverse-map the sector the device wrote to the original bio. For zone-append bios, get the offset in the zone of the written sector from the clone bio and add that to the original bio's sector position. Fixes: 0512a75b98f8 ("block: Introduce REQ_OP_ZONE_APPEND") Cc: [email protected] Reported-by: Naohiro Aota <[email protected]> Signed-off-by: Johannes Thumshirn <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-06-19dm zoned: Fix metadata zone size checkShin'ichiro Kawasaki1-1/+2
When dm zoned has multiple devices, metadata is on the cache device, not in random zones of the zoned devices. Then the number of metadata zones shall be checked with the number of cache zones, not random zones. Fixes: 34f5affd04c4 ("dm zoned: separate random and cache zones") Signed-off-by: Shin'ichiro Kawasaki <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-06-19docs: device-mapper: add dm-ebs.rst to an index fileMauro Carvalho Chehab1-0/+1
Solves this Sphinx warning: Documentation/admin-guide/device-mapper/dm-ebs.rst: WARNING: document isn't included in any toctree Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2020-06-19MAINTAINERS: Add robert and myself as qcom i2c cci maintainersLoic Poulain1-0/+9
Signed-off-by: Loic Poulain <[email protected]> Signed-off-by: Robert Foss <[email protected]> [wsa: kept sorting] Signed-off-by: Wolfram Sang <[email protected]>
2020-06-19RDMA/mad: Fix possible memory leak in ib_mad_post_receive_mads()Fan Guo1-0/+1
If ib_dma_mapping_error() returns non-zero value, ib_mad_post_receive_mads() will jump out of loops and return -ENOMEM without freeing mad_priv. Fix this memory-leak problem by freeing mad_priv in this case. Fixes: 2c34e68f4261 ("IB/mad: Check and handle potential DMA mapping errors") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Fan Guo <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-06-19Revert "KVM: VMX: Micro-optimize vmexit time when not exposing PMU"Vitaly Kuznetsov1-2/+1
Guest crashes are observed on a Cascade Lake system when 'perf top' is launched on the host, e.g. BUG: unable to handle kernel paging request at fffffe0000073038 PGD 7ffa7067 P4D 7ffa7067 PUD 7ffa6067 PMD 7ffa5067 PTE ffffffffff120 Oops: 0000 [#1] SMP PTI CPU: 1 PID: 1 Comm: systemd Not tainted 4.18.0+ #380 ... Call Trace: serial8250_console_write+0xfe/0x1f0 call_console_drivers.constprop.0+0x9d/0x120 console_unlock+0x1ea/0x460 Call traces are different but the crash is imminent. The problem was blindly bisected to the commit 041bc42ce2d0 ("KVM: VMX: Micro-optimize vmexit time when not exposing PMU"). It was also confirmed that the issue goes away if PMU is exposed to the guest. With some instrumentation of the guest we can see what is being switched (when we do atomic_switch_perf_msrs()): vmx_vcpu_run: switching 2 msrs vmx_vcpu_run: switching MSR38f guest: 70000000d host: 70000000f vmx_vcpu_run: switching MSR3f1 guest: 0 host: 2 The current guess is that PEBS (MSR_IA32_PEBS_ENABLE, 0x3f1) is to blame. Regardless of whether PMU is exposed to the guest or not, PEBS needs to be disabled upon switch. This reverts commit 041bc42ce2d0efac3b85bbb81dea8c74b81f4ef9. Reported-by: Maxime Coquelin <[email protected]> Signed-off-by: Vitaly Kuznetsov <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2020-06-19i2c: smbus: Fix spelling mistake in the commentsKeyur Patel1-1/+1
Fix spelling mistake in the comments with help of `codespell`. seperate ==> separate Signed-off-by: Keyur Patel <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-06-19Documentation/i2c: SMBus start signal is S not ADaniel Schaefer1-1/+1
Just like all other I2C/SMBus commands, the start signal for the SMBus Quick Command is S, not A. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Daniel Schaefer <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-06-19i2c: remove deprecated i2c_new_device APIWolfram Sang2-30/+3
All in-tree users have been converted to the new i2c_new_client_device function, so remove this deprecated one. Signed-off-by: Wolfram Sang <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-06-19Documentation: media: convert to use i2c_new_client_device()Wolfram Sang2-2/+2
Move away from the deprecated API and advertise the new one. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-06-19video: backlight: tosa_lcd: convert to use i2c_new_client_device()Wolfram Sang1-2/+2
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Daniel Thompson <[email protected]> Acked-by: Lee Jones <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-06-19x86/platform/intel-mid: convert to use i2c_new_client_device()Wolfram Sang1-2/+2
Move away from the deprecated API and return the shiny new ERRPTR where useful. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-06-19drm: encoder_slave: use new I2C APIWolfram Sang1-8/+2
i2c_new_client() is deprecated, use the replacement i2c_new_client_device(). Also, we have a helper to check if a driver is bound. Use it to simplify the code. Note that this changes the errno for a failed device creation from ENOMEM to ENODEV. No callers currently interpret this errno, though, so we use this condensed error check. Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Acked-by: Daniel Vetter <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-06-19drm: encoder_slave: fix refcouting error for modulesWolfram Sang1-2/+3
module_put() balances try_module_get(), not request_module(). Fix the error path to match that. Fixes: 2066facca4c7 ("drm/kms: slave encoder interface.") Signed-off-by: Wolfram Sang <[email protected]> Reviewed-by: Emil Velikov <[email protected]> Acked-by: Daniel Vetter <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2020-06-18i40e: fix crash when Rx descriptor count is changedBjörn Töpel1-0/+3
When the AF_XDP buffer allocator was introduced, the Rx SW ring "rx_bi" allocation was moved from i40e_setup_rx_descriptors() function, and was instead done in the i40e_configure_rx_ring() function. This broke the ethtool set_ringparam() hook for changing the Rx descriptor count, which was relying on i40e_setup_rx_descriptors() to handle the allocation. Fix this by adding an explicit i40e_alloc_rx_bi() call to i40e_set_ringparam(). Fixes: be1222b585fd ("i40e: Separate kernel allocated rx_bi rings from AF_XDP rings") Signed-off-by: Björn Töpel <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-18ice: protect ring accesses with WRITE_ONCECiara Loftus2-5/+5
The READ_ONCE macro is used when reading rings prior to accessing the statistics pointer. The corresponding WRITE_ONCE usage when allocating and freeing the rings to ensure protected access was not in place. Introduce this. Signed-off-by: Ciara Loftus <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-18i40e: protect ring accesses with READ- and WRITE_ONCECiara Loftus1-10/+19
READ_ONCE should be used when reading rings prior to accessing the statistics pointer. Introduce this as well as the corresponding WRITE_ONCE usage when allocating and freeing the rings, to ensure protected access. Signed-off-by: Ciara Loftus <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-18ixgbe: protect ring accesses with READ- and WRITE_ONCECiara Loftus2-9/+17
READ_ONCE should be used when reading rings prior to accessing the statistics pointer. Introduce this as well as the corresponding WRITE_ONCE usage when allocating and freeing the rings, to ensure protected access. Signed-off-by: Ciara Loftus <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2020-06-18net: increment xmit_recursion level in dev_direct_xmit()Eric Dumazet2-1/+3
Back in commit f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack") Hannes added code so that IPv6 stack would not trust skb->sk for typical cases where packet goes through 'standard' xmit path (__dev_queue_xmit()) Alas af_packet had a dev_direct_xmit() path that was not dealing yet with xmit_recursion level. Also change sk_mc_loop() to dump a stack once only. Without this patch, syzbot was able to trigger : [1] [ 153.567378] WARNING: CPU: 7 PID: 11273 at net/core/sock.c:721 sk_mc_loop+0x51/0x70 [ 153.567378] Modules linked in: nfnetlink ip6table_raw ip6table_filter iptable_raw iptable_nat nf_nat nf_conntrack nf_defrag_ipv4 nf_defrag_ipv6 iptable_filter macsec macvtap tap macvlan 8021q hsr wireguard libblake2s blake2s_x86_64 libblake2s_generic udp_tunnel ip6_udp_tunnel libchacha20poly1305 poly1305_x86_64 chacha_x86_64 libchacha curve25519_x86_64 libcurve25519_generic netdevsim batman_adv dummy team bridge stp llc w1_therm wire i2c_mux_pca954x i2c_mux cdc_acm ehci_pci ehci_hcd mlx4_en mlx4_ib ib_uverbs ib_core mlx4_core [ 153.567386] CPU: 7 PID: 11273 Comm: b159172088 Not tainted 5.8.0-smp-DEV #273 [ 153.567387] RIP: 0010:sk_mc_loop+0x51/0x70 [ 153.567388] Code: 66 83 f8 0a 75 24 0f b6 4f 12 b8 01 00 00 00 31 d2 d3 e0 a9 bf ef ff ff 74 07 48 8b 97 f0 02 00 00 0f b6 42 3a 83 e0 01 5d c3 <0f> 0b b8 01 00 00 00 5d c3 0f b6 87 18 03 00 00 5d c0 e8 04 83 e0 [ 153.567388] RSP: 0018:ffff95c69bb93990 EFLAGS: 00010212 [ 153.567388] RAX: 0000000000000011 RBX: ffff95c6e0ee3e00 RCX: 0000000000000007 [ 153.567389] RDX: ffff95c69ae50000 RSI: ffff95c6c30c3000 RDI: ffff95c6c30c3000 [ 153.567389] RBP: ffff95c69bb93990 R08: ffff95c69a77f000 R09: 0000000000000008 [ 153.567389] R10: 0000000000000040 R11: 00003e0e00026128 R12: ffff95c6c30c3000 [ 153.567390] R13: ffff95c6cc4fd500 R14: ffff95c6f84500c0 R15: ffff95c69aa13c00 [ 153.567390] FS: 00007fdc3a283700(0000) GS:ffff95c6ff9c0000(0000) knlGS:0000000000000000 [ 153.567390] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 153.567391] CR2: 00007ffee758e890 CR3: 0000001f9ba20003 CR4: 00000000001606e0 [ 153.567391] Call Trace: [ 153.567391] ip6_finish_output2+0x34e/0x550 [ 153.567391] __ip6_finish_output+0xe7/0x110 [ 153.567391] ip6_finish_output+0x2d/0xb0 [ 153.567392] ip6_output+0x77/0x120 [ 153.567392] ? __ip6_finish_output+0x110/0x110 [ 153.567392] ip6_local_out+0x3d/0x50 [ 153.567392] ipvlan_queue_xmit+0x56c/0x5e0 [ 153.567393] ? ksize+0x19/0x30 [ 153.567393] ipvlan_start_xmit+0x18/0x50 [ 153.567393] dev_direct_xmit+0xf3/0x1c0 [ 153.567393] packet_direct_xmit+0x69/0xa0 [ 153.567394] packet_sendmsg+0xbf0/0x19b0 [ 153.567394] ? plist_del+0x62/0xb0 [ 153.567394] sock_sendmsg+0x65/0x70 [ 153.567394] sock_write_iter+0x93/0xf0 [ 153.567394] new_sync_write+0x18e/0x1a0 [ 153.567395] __vfs_write+0x29/0x40 [ 153.567395] vfs_write+0xb9/0x1b0 [ 153.567395] ksys_write+0xb1/0xe0 [ 153.567395] __x64_sys_write+0x1a/0x20 [ 153.567395] do_syscall_64+0x43/0x70 [ 153.567396] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 153.567396] RIP: 0033:0x453549 [ 153.567396] Code: Bad RIP value. [ 153.567396] RSP: 002b:00007fdc3a282cc8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 153.567397] RAX: ffffffffffffffda RBX: 00000000004d32d0 RCX: 0000000000453549 [ 153.567397] RDX: 0000000000000020 RSI: 0000000020000300 RDI: 0000000000000003 [ 153.567398] RBP: 00000000004d32d8 R08: 0000000000000000 R09: 0000000000000000 [ 153.567398] R10: 0000000000000000 R11: 0000000000000246 R12: 00000000004d32dc [ 153.567398] R13: 00007ffee742260f R14: 00007fdc3a282dc0 R15: 00007fdc3a283700 [ 153.567399] ---[ end trace c1d5ae2b1059ec62 ]--- f60e5990d9c1 ("ipv6: protect skb->sk accesses from recursive dereference inside the stack") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18net: dsa: bcm_sf2: Fix node reference countFlorian Fainelli1-0/+2
of_find_node_by_name() will do an of_node_put() on the "from" argument. With CONFIG_OF_DYNAMIC enabled which checks for device_node reference counts, we would be getting a warning like this: [ 6.347230] refcount_t: increment on 0; use-after-free. [ 6.352498] WARNING: CPU: 3 PID: 77 at lib/refcount.c:156 refcount_inc_checked+0x38/0x44 [ 6.360601] Modules linked in: [ 6.363661] CPU: 3 PID: 77 Comm: kworker/3:1 Tainted: G W 5.4.46-gb78b3e9956e6 #13 [ 6.372546] Hardware name: BCM97278SV (DT) [ 6.376649] Workqueue: events deferred_probe_work_func [ 6.381796] pstate: 60000005 (nZCv daif -PAN -UAO) [ 6.386595] pc : refcount_inc_checked+0x38/0x44 [ 6.391133] lr : refcount_inc_checked+0x38/0x44 ... [ 6.478791] Call trace: [ 6.481243] refcount_inc_checked+0x38/0x44 [ 6.485433] kobject_get+0x3c/0x4c [ 6.488840] of_node_get+0x24/0x34 [ 6.492247] of_irq_find_parent+0x3c/0xe0 [ 6.496263] of_irq_parse_one+0xe4/0x1d0 [ 6.500191] irq_of_parse_and_map+0x44/0x84 [ 6.504381] bcm_sf2_sw_probe+0x22c/0x844 [ 6.508397] platform_drv_probe+0x58/0xa8 [ 6.512413] really_probe+0x238/0x3fc [ 6.516081] driver_probe_device+0x11c/0x12c [ 6.520358] __device_attach_driver+0xa8/0x100 [ 6.524808] bus_for_each_drv+0xb4/0xd0 [ 6.528650] __device_attach+0xd0/0x164 [ 6.532493] device_initial_probe+0x24/0x30 [ 6.536682] bus_probe_device+0x38/0x98 [ 6.540524] deferred_probe_work_func+0xa8/0xd4 [ 6.545061] process_one_work+0x178/0x288 [ 6.549078] process_scheduled_works+0x44/0x48 [ 6.553529] worker_thread+0x218/0x270 [ 6.557285] kthread+0xdc/0xe4 [ 6.560344] ret_from_fork+0x10/0x18 [ 6.563925] ---[ end trace 68f65caf69bb152a ]--- Fix this by adding a of_node_get() to increment the reference count prior to the call. Fixes: afa3b592953b ("net: dsa: bcm_sf2: Ensure correct sub-node is parsed") Signed-off-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18net: ethtool: add missing NETIF_F_GSO_FRAGLIST feature stringAlexander Lobakin1-0/+1
Commit 3b33583265ed ("net: Add fraglist GRO/GSO feature flags") missed an entry for NETIF_F_GSO_FRAGLIST in netdev_features_strings array. As a result, fraglist GSO feature is not shown in 'ethtool -k' output and can't be toggled on/off. The fix is trivial. Fixes: 3b33583265ed ("net: Add fraglist GRO/GSO feature flags") Signed-off-by: Alexander Lobakin <[email protected]> Reviewed-by: Michal Kubecek <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18tg3: driver sleeps indefinitely when EEH errors exceed eeh_max_freezesDavid Christensen1-2/+2
The driver function tg3_io_error_detected() calls napi_disable twice, without an intervening napi_enable, when the number of EEH errors exceeds eeh_max_freezes, resulting in an indefinite sleep while holding rtnl_lock. Add check for pcierr_recovery which skips code already executed for the "Frozen" state. Signed-off-by: David Christensen <[email protected]> Reviewed-by: Michael Chan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18bareudp: Fixed multiproto mode configurationMartin1-0/+3
Code to handle multiproto configuration is missing. Fixes: 4b5f67232d95 ("net: Special handling for IP & MPLS") Signed-off-by: Martin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18Merge branch 's390-qeth-fixes'David S. Miller1-6/+5
Julian Wiedmann says: ==================== s390/qeth: fixes 2020-06-17 please apply the following patch series for qeth to netdev's net tree. The first patch fixes a regression in the error handling for a specific cmd type. I have some follow-ups queued up for net-next to clean this up properly... The second patch fine-tunes the HW offload restrictions that went in with this merge window. In some setups we don't need to apply them. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-06-18s390/qeth: let isolation mode override HW offload restrictionsJulian Wiedmann1-2/+4
When a device is configured with ISOLATION_MODE_FWD, traffic never goes through the internal switch. Don't apply the offload restrictions in this case. Fixes: c619e9a6f52f ("s390/qeth: don't use restricted offloads for local traffic") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18s390/qeth: fix error handling for isolation mode cmdsJulian Wiedmann1-4/+1
Current(?) OSA devices also store their cmd-specific return codes for SET_ACCESS_CONTROL cmds into the top-level cmd->hdr.return_code. So once we added stricter checking for the top-level field a while ago, none of the error logic that rolls back the user's configuration to its old state is applied any longer. For this specific cmd, go back to the old model where we peek into the cmd structure even though the top-level field indicated an error. Fixes: 686c97ee29c8 ("s390/qeth: fix error handling in adapter command callbacks") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18Merge branch 'mptcp-cope-with-syncookie-on-MP_JOINs'David S. Miller2-30/+28
Paolo Abeni says: ==================== mptcp: cope with syncookie on MP_JOINs Currently syncookies on MP_JOIN connections are not handled correctly: the connections fallback to TCP and are kept alive instead of resetting them at fallback time. The first patch propagates the required information up to syn_recv_sock time, and the 2nd patch addresses the unifying the error path for all MP_JOIN requests. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-06-18mptcp: drop MP_JOIN request sock on syn cookiesPaolo Abeni1-8/+10
Currently any MPTCP socket using syn cookies will fallback to TCP at 3rd ack time. In case of MP_JOIN requests, the RFC mandate closing the child and sockets, but the existing error paths do not handle the syncookie scenario correctly. Address the issue always forcing the child shutdown in case of MP_JOIN fallback. Fixes: ae2dd7164943 ("mptcp: handle tcp fallback when using syn cookies") Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18mptcp: cache msk on MP_JOIN init_reqPaolo Abeni2-22/+18
The msk ownership is transferred to the child socket at 3rd ack time, so that we avoid more lookups later. If the request does not reach the 3rd ack, the MSK reference is dropped at request sock release time. As a side effect, fallback is now tracked by a NULL msk reference instead of zeroed 'mp_join' field. This will simplify the next patch. Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: Mat Martineau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18net: Fix the arp error in some casesguodeqing1-1/+1
ie., $ ifconfig eth0 6.6.6.6 netmask 255.255.255.0 $ ip rule add from 6.6.6.6 table 6666 $ ip route add 9.9.9.9 via 6.6.6.6 $ ping -I 6.6.6.6 9.9.9.9 PING 9.9.9.9 (9.9.9.9) from 6.6.6.6 : 56(84) bytes of data. 3 packets transmitted, 0 received, 100% packet loss, time 2079ms $ arp Address HWtype HWaddress Flags Mask Iface 6.6.6.6 (incomplete) eth0 The arp request address is error, this is because fib_table_lookup in fib_check_nh lookup the destnation 9.9.9.9 nexthop, the scope of the fib result is RT_SCOPE_LINK,the correct scope is RT_SCOPE_HOST. Here I add a check of whether this is RT_TABLE_MAIN to solve this problem. Fixes: 3bfd847203c6 ("net: Use passed in table for nexthop lookups") Signed-off-by: guodeqing <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18Merge branch 'sja1105-fixes'David S. Miller1-6/+6
Vladimir Oltean says: ==================== Fix VLAN checks for SJA1105 DSA tc-flower filters This fixes a ridiculous situation where the driver, in VLAN-unaware mode, would refuse accepting any tc filter: tc filter replace dev sw1p3 ingress flower skip_sw \ dst_mac 42:be:24:9b:76:20 \ action gate (...) Error: sja1105: Can only gate based on {DMAC, VID, PCP}. tc filter replace dev sw1p3 ingress protocol 802.1Q flower skip_sw \ vlan_id 1 vlan_prio 0 dst_mac 42:be:24:9b:76:20 \ action gate (...) Error: sja1105: Can only gate based on DMAC. So, without changing the VLAN awareness state, it says it doesn't want VLAN-aware rules, and it doesn't want VLAN-unaware rules either. One would say it's in Schrodinger's state... Now, the situation has been made worse by commit 7f14937facdc ("net: dsa: sja1105: keep the VLAN awareness state in a driver variable"), which made VLAN awareness a ternary attribute, but after inspecting the code from before that patch with a truth table, it looks like the logical bug was there even before. While attempting to fix this, I also noticed some leftover debugging code in one of the places that needed to be fixed. It would have appeared in the context of patch 3/3 anyway, so I decided to create a patch that removes it. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-06-18net: dsa: sja1105: fix checks for VLAN state in gate actionVladimir Oltean1-1/+3
This action requires the VLAN awareness state of the switch to be of the same type as the key that's being added: - If the switch is unaware of VLAN, then the tc filter key must only contain the destination MAC address. - If the switch is VLAN-aware, the key must also contain the VLAN ID and PCP. But this check doesn't work unless we verify the VLAN awareness state on both the "if" and the "else" branches. Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18net: dsa: sja1105: fix checks for VLAN state in redirect actionVladimir Oltean1-1/+3
This action requires the VLAN awareness state of the switch to be of the same type as the key that's being added: - If the switch is unaware of VLAN, then the tc filter key must only contain the destination MAC address. - If the switch is VLAN-aware, the key must also contain the VLAN ID and PCP. But this check doesn't work unless we verify the VLAN awareness state on both the "if" and the "else" branches. Fixes: dfacc5a23e22 ("net: dsa: sja1105: support flow-based redirection via virtual links") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18net: dsa: sja1105: remove debugging code in sja1105_vl_gateVladimir Oltean1-4/+0
This shouldn't be there. Fixes: 834f8933d5dd ("net: dsa: sja1105: implement tc-gate using time-triggered virtual links") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18Merge branch 'act_gate-fixes'David S. Miller1-58/+68
Davide Caratti says: ==================== two fixes for 'act_gate' control plane - patch 1/2 attempts to fix the error path of tcf_gate_init() when users try to configure 'act_gate' rules with wrong parameters - patch 2/2 is a follow-up of a recent fix for NULL dereference in the error path of tcf_gate_init() further work will introduce a tdc test for 'act_gate'. changes since v2: - fix undefined behavior in patch 1/2 - improve comment in patch 2/2 changes since v1: coding style fixes in patch 1/2 and 2/2 ==================== Signed-off-by: David S. Miller <[email protected]>
2020-06-18net/sched: act_gate: fix configuration of the periodic timerDavide Caratti1-35/+55
assigning a dummy value of 'clock_id' to avoid cancellation of the cycle timer before its initialization was a temporary solution, and we still need to handle the case where act_gate timer parameters are changed by commands like the following one: # tc action replace action gate <parameters> the fix consists in the following items: 1) remove the workaround assignment of 'clock_id', and init the list of entries before the first error path after IDR atomic check/allocation 2) validate 'clock_id' earlier: there is no need to do IDR atomic check/allocation if we know that 'clock_id' is a bad value 3) use a dedicated function, 'gate_setup_timer()', to ensure that the timer is cancelled and re-initialized on action overwrite, and also ensure we initialize the timer in the error path of tcf_gate_init() v3: improve comment in the error path of tcf_gate_init() (thanks to Vladimir Oltean) v2: avoid 'goto' in gate_setup_timer (thanks to Cong Wang) CC: Ivan Vecera <[email protected]> Fixes: a01c245438c5 ("net/sched: fix a couple of splats in the error path of tfc_gate_init()") Fixes: a51c328df310 ("net: qos: introduce a gate control flow action") Signed-off-by: Davide Caratti <[email protected]> Acked-by: Vladimir Oltean <[email protected]> Tested-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18net/sched: act_gate: fix NULL dereference in tcf_gate_init()Davide Caratti1-23/+13
it is possible to see a KASAN use-after-free, immediately followed by a NULL dereference crash, with the following command: # tc action add action gate index 3 cycle-time 100000000ns \ > cycle-time-ext 100000000ns clockid CLOCK_TAI BUG: KASAN: use-after-free in tcf_action_init_1+0x8eb/0x960 Write of size 1 at addr ffff88810a5908bc by task tc/883 CPU: 0 PID: 883 Comm: tc Not tainted 5.7.0+ #188 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 Call Trace: dump_stack+0x75/0xa0 print_address_description.constprop.6+0x1a/0x220 kasan_report.cold.9+0x37/0x7c tcf_action_init_1+0x8eb/0x960 tcf_action_init+0x157/0x2a0 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x2a3/0x39d rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 [...] KASAN: null-ptr-deref in range [0x0000000000000070-0x0000000000000077] CPU: 0 PID: 883 Comm: tc Tainted: G B 5.7.0+ #188 Hardware name: Red Hat KVM, BIOS 1.11.1-4.module+el8.1.0+4066+0f1aadab 04/01/2014 RIP: 0010:tcf_action_fill_size+0xa3/0xf0 [....] RSP: 0018:ffff88813a48f250 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: 0000000000000094 RCX: ffffffffa47c3eb6 RDX: 000000000000000e RSI: 0000000000000008 RDI: 0000000000000070 RBP: ffff88810a590800 R08: 0000000000000004 R09: ffffed1027491e03 R10: 0000000000000003 R11: ffffed1027491e03 R12: 0000000000000000 R13: 0000000000000000 R14: dffffc0000000000 R15: ffff88810a590800 FS: 00007f62cae8ce40(0000) GS:ffff888147c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f62c9d20a10 CR3: 000000013a52a000 CR4: 0000000000340ef0 Call Trace: tcf_action_init+0x172/0x2a0 tcf_action_add+0xd9/0x2f0 tc_ctl_action+0x2a3/0x39d rtnetlink_rcv_msg+0x5f3/0x920 netlink_rcv_skb+0x120/0x380 netlink_unicast+0x439/0x630 netlink_sendmsg+0x714/0xbf0 sock_sendmsg+0xe2/0x110 ____sys_sendmsg+0x5b4/0x890 ___sys_sendmsg+0xe9/0x160 __sys_sendmsg+0xd3/0x170 do_syscall_64+0x9a/0x370 entry_SYSCALL_64_after_hwframe+0x44/0xa9 this is caused by the test on 'cycletime_ext', that is still unassigned when the action is newly created. This makes the action .init() return 0 without calling tcf_idr_insert(), hence the UAF + crash. rework the logic that prevents zero values of cycle-time, as follows: 1) 'tcfg_cycletime_ext' seems to be unused in the action software path, and it was already possible by other means to obtain non-zero cycletime and zero cycletime-ext. So, removing that test should not cause any damage. 2) while at it, we must prevent overwriting configuration data with wrong ones: use a temporary variable for 'tcfg_cycletime', and validate it preserving the original semantic (that allowed computing the cycle time as the sum of all intervals, when not specified by TCA_GATE_CYCLE_TIME). 3) remove the test on 'tcfg_cycletime', no more useful, and avoid returning -EFAULT, which did not seem an appropriate return value for a wrong netlink attribute. v3: fix uninitialized 'cycletime' (thanks to Vladimir Oltean) v2: remove useless 'return;' at the end of void gate_get_start_time() Fixes: a51c328df310 ("net: qos: introduce a gate control flow action") CC: Ivan Vecera <[email protected]> Signed-off-by: Davide Caratti <[email protected]> Acked-by: Vladimir Oltean <[email protected]> Tested-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18ip_tunnel: fix use-after-free in ip_tunnel_lookup()Taehee Yoo1-6/+8
In the datapath, the ip_tunnel_lookup() is used and it internally uses fallback tunnel device pointer, which is fb_tunnel_dev. This pointer variable should be set to NULL when a fb interface is deleted. But there is no routine to set fb_tunnel_dev pointer to NULL. So, this pointer will be still used after interface is deleted and it eventually results in the use-after-free problem. Test commands: ip netns add A ip netns add B ip link add eth0 type veth peer name eth1 ip link set eth0 netns A ip link set eth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set eth0 up ip netns exec A ip link add gre1 type gre local 10.0.0.1 \ remote 10.0.0.2 ip netns exec A ip link set gre1 up ip netns exec A ip a a 10.0.100.1/24 dev gre1 ip netns exec A ip a a 10.0.0.1/24 dev eth0 ip netns exec B ip link set lo up ip netns exec B ip link set eth1 up ip netns exec B ip link add gre1 type gre local 10.0.0.2 \ remote 10.0.0.1 ip netns exec B ip link set gre1 up ip netns exec B ip a a 10.0.100.2/24 dev gre1 ip netns exec B ip a a 10.0.0.2/24 dev eth1 ip netns exec A hping3 10.0.100.2 -2 --flood -d 60000 & ip netns del B Splat looks like: [ 77.793450][ C3] ================================================================== [ 77.794702][ C3] BUG: KASAN: use-after-free in ip_tunnel_lookup+0xcc4/0xf30 [ 77.795573][ C3] Read of size 4 at addr ffff888060bd9c84 by task hping3/2905 [ 77.796398][ C3] [ 77.796664][ C3] CPU: 3 PID: 2905 Comm: hping3 Not tainted 5.8.0-rc1+ #616 [ 77.797474][ C3] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 77.798453][ C3] Call Trace: [ 77.798815][ C3] <IRQ> [ 77.799142][ C3] dump_stack+0x9d/0xdb [ 77.799605][ C3] print_address_description.constprop.7+0x2cc/0x450 [ 77.800365][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.800908][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.801517][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.802145][ C3] kasan_report+0x154/0x190 [ 77.802821][ C3] ? ip_tunnel_lookup+0xcc4/0xf30 [ 77.803503][ C3] ip_tunnel_lookup+0xcc4/0xf30 [ 77.804165][ C3] __ipgre_rcv+0x1ab/0xaa0 [ip_gre] [ 77.804862][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 77.805621][ C3] gre_rcv+0x304/0x1910 [ip_gre] [ 77.806293][ C3] ? lock_acquire+0x1a9/0x870 [ 77.806925][ C3] ? gre_rcv+0xfe/0x354 [gre] [ 77.807559][ C3] ? erspan_xmit+0x2e60/0x2e60 [ip_gre] [ 77.808305][ C3] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 77.809032][ C3] ? rcu_read_lock_held+0x90/0xa0 [ 77.809713][ C3] gre_rcv+0x1b8/0x354 [gre] [ ... ] Suggested-by: Eric Dumazet <[email protected]> Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18ip6_gre: fix use-after-free in ip6gre_tunnel_lookup()Taehee Yoo1-3/+6
In the datapath, the ip6gre_tunnel_lookup() is used and it internally uses fallback tunnel device pointer, which is fb_tunnel_dev. This pointer variable should be set to NULL when a fb interface is deleted. But there is no routine to set fb_tunnel_dev pointer to NULL. So, this pointer will be still used after interface is deleted and it eventually results in the use-after-free problem. Test commands: ip netns add A ip netns add B ip link add eth0 type veth peer name eth1 ip link set eth0 netns A ip link set eth1 netns B ip netns exec A ip link set lo up ip netns exec A ip link set eth0 up ip netns exec A ip link add ip6gre1 type ip6gre local fc:0::1 \ remote fc:0::2 ip netns exec A ip -6 a a fc:100::1/64 dev ip6gre1 ip netns exec A ip link set ip6gre1 up ip netns exec A ip -6 a a fc:0::1/64 dev eth0 ip netns exec A ip link set ip6gre0 up ip netns exec B ip link set lo up ip netns exec B ip link set eth1 up ip netns exec B ip link add ip6gre1 type ip6gre local fc:0::2 \ remote fc:0::1 ip netns exec B ip -6 a a fc:100::2/64 dev ip6gre1 ip netns exec B ip link set ip6gre1 up ip netns exec B ip -6 a a fc:0::2/64 dev eth1 ip netns exec B ip link set ip6gre0 up ip netns exec A ping fc:100::2 -s 60000 & ip netns del B Splat looks like: [ 73.087285][ C1] BUG: KASAN: use-after-free in ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.088361][ C1] Read of size 4 at addr ffff888040559218 by task ping/1429 [ 73.089317][ C1] [ 73.089638][ C1] CPU: 1 PID: 1429 Comm: ping Not tainted 5.7.0+ #602 [ 73.090531][ C1] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 73.091725][ C1] Call Trace: [ 73.092160][ C1] <IRQ> [ 73.092556][ C1] dump_stack+0x96/0xdb [ 73.093122][ C1] print_address_description.constprop.6+0x2cc/0x450 [ 73.094016][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.094894][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.095767][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.096619][ C1] kasan_report+0x154/0x190 [ 73.097209][ C1] ? ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.097989][ C1] ip6gre_tunnel_lookup+0x1064/0x13f0 [ip6_gre] [ 73.098750][ C1] ? gre_del_protocol+0x60/0x60 [gre] [ 73.099500][ C1] gre_rcv+0x1c5/0x1450 [ip6_gre] [ 73.100199][ C1] ? ip6gre_header+0xf00/0xf00 [ip6_gre] [ 73.100985][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 73.101830][ C1] ? ip6_input_finish+0x5/0xf0 [ 73.102483][ C1] ip6_protocol_deliver_rcu+0xcbb/0x1510 [ 73.103296][ C1] ip6_input_finish+0x5b/0xf0 [ 73.103920][ C1] ip6_input+0xcd/0x2c0 [ 73.104473][ C1] ? ip6_input_finish+0xf0/0xf0 [ 73.105115][ C1] ? rcu_read_lock_held+0x90/0xa0 [ 73.105783][ C1] ? rcu_read_lock_sched_held+0xc0/0xc0 [ 73.106548][ C1] ipv6_rcv+0x1f1/0x300 [ ... ] Suggested-by: Eric Dumazet <[email protected]> Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18net: core: reduce recursion limit valueTaehee Yoo1-1/+1
In the current code, ->ndo_start_xmit() can be executed recursively only 10 times because of stack memory. But, in the case of the vxlan, 10 recursion limit value results in a stack overflow. In the current code, the nested interface is limited by 8 depth. There is no critical reason that the recursion limitation value should be 10. So, it would be good to be the same value with the limitation value of nesting interface depth. Test commands: ip link add vxlan10 type vxlan vni 10 dstport 4789 srcport 4789 4789 ip link set vxlan10 up ip a a 192.168.10.1/24 dev vxlan10 ip n a 192.168.10.2 dev vxlan10 lladdr fc:22:33:44:55:66 nud permanent for i in {9..0} do let A=$i+1 ip link add vxlan$i type vxlan vni $i dstport 4789 srcport 4789 4789 ip link set vxlan$i up ip a a 192.168.$i.1/24 dev vxlan$i ip n a 192.168.$i.2 dev vxlan$i lladdr fc:22:33:44:55:66 nud permanent bridge fdb add fc:22:33:44:55:66 dev vxlan$A dst 192.168.$i.2 self done hping3 192.168.10.2 -2 -d 60000 Splat looks like: [ 103.814237][ T1127] ============================================================================= [ 103.871955][ T1127] BUG kmalloc-2k (Tainted: G B ): Padding overwritten. 0x00000000897a2e4f-0x000 [ 103.873187][ T1127] ----------------------------------------------------------------------------- [ 103.873187][ T1127] [ 103.874252][ T1127] INFO: Slab 0x000000005cccc724 objects=5 used=5 fp=0x0000000000000000 flags=0x10000000001020 [ 103.881323][ T1127] CPU: 3 PID: 1127 Comm: hping3 Tainted: G B 5.7.0+ #575 [ 103.882131][ T1127] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 103.883006][ T1127] Call Trace: [ 103.883324][ T1127] dump_stack+0x96/0xdb [ 103.883716][ T1127] slab_err+0xad/0xd0 [ 103.884106][ T1127] ? _raw_spin_unlock+0x1f/0x30 [ 103.884620][ T1127] ? get_partial_node.isra.78+0x140/0x360 [ 103.885214][ T1127] slab_pad_check.part.53+0xf7/0x160 [ 103.885769][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.886316][ T1127] check_slab+0x97/0xb0 [ 103.886763][ T1127] alloc_debug_processing+0x84/0x1a0 [ 103.887308][ T1127] ___slab_alloc+0x5a5/0x630 [ 103.887765][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.888265][ T1127] ? lock_downgrade+0x730/0x730 [ 103.888762][ T1127] ? pskb_expand_head+0x110/0xe10 [ 103.889244][ T1127] ? __slab_alloc+0x3e/0x80 [ 103.889675][ T1127] __slab_alloc+0x3e/0x80 [ 103.890108][ T1127] __kmalloc_node_track_caller+0xc7/0x420 [ ... ] Fixes: 11a766ce915f ("net: Increase xmit RECURSION_LIMIT to 10.") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18net: fix memleak in register_netdevice()Yang Yingliang1-0/+7
I got a memleak report when doing some fuzz test: unreferenced object 0xffff888112584000 (size 13599): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 32 bytes): 74 61 70 30 00 00 00 00 00 00 00 00 00 00 00 00 tap0............ 00 ee d9 19 81 88 ff ff 00 00 00 00 00 00 00 00 ................ backtrace: [<000000002f60ba65>] __kmalloc_node+0x309/0x3a0 [<0000000075b211ec>] kvmalloc_node+0x7f/0xc0 [<00000000d3a97396>] alloc_netdev_mqs+0x76/0xfc0 [<00000000609c3655>] __tun_chr_ioctl+0x1456/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff888111845cc0 (size 8): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 8 bytes): 74 61 70 30 00 88 ff ff tap0.... backtrace: [<000000004c159777>] kstrdup+0x35/0x70 [<00000000d8b496ad>] kstrdup_const+0x3d/0x50 [<00000000494e884a>] kvasprintf_const+0xf1/0x180 [<0000000097880a2b>] kobject_set_name_vargs+0x56/0x140 [<000000008fbdfc7b>] dev_set_name+0xab/0xe0 [<000000005b99e3b4>] netdev_register_kobject+0xc0/0x390 [<00000000602704fe>] register_netdevice+0xb61/0x1250 [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 unreferenced object 0xffff88811886d800 (size 512): comm "ip", pid 3048, jiffies 4294911734 (age 343.491s) hex dump (first 32 bytes): 00 00 00 00 ad 4e ad de ff ff ff ff 00 00 00 00 .....N.......... ff ff ff ff ff ff ff ff c0 66 3d a3 ff ff ff ff .........f=..... backtrace: [<0000000050315800>] device_add+0x61e/0x1950 [<0000000021008dfb>] netdev_register_kobject+0x17e/0x390 [<00000000602704fe>] register_netdevice+0xb61/0x1250 [<000000002b7ca244>] __tun_chr_ioctl+0x1cd1/0x3d70 [<000000001127ca24>] ksys_ioctl+0xe5/0x130 [<00000000b7d5e66a>] __x64_sys_ioctl+0x6f/0xb0 [<00000000e1023498>] do_syscall_64+0x56/0xa0 [<000000009ec0eb12>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 If call_netdevice_notifiers() failed, then rollback_registered() calls netdev_unregister_kobject() which holds the kobject. The reference cannot be put because the netdev won't be add to todo list, so it will leads a memleak, we need put the reference to avoid memleak. Reported-by: Hulk Robot <[email protected]> Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18net: ethernet: mvneta: Add 2500BaseX support for SoCs without comphySascha Hauer1-0/+6
The older SoCs like Armada XP support a 2500BaseX mode in the datasheets referred to as DR-SGMII (Double rated SGMII) or HS-SGMII (High Speed SGMII). This is an upclocked 1000BaseX mode, thus PHY_INTERFACE_MODE_2500BASEX is the appropriate mode define for it. adding support for it merely means writing the correct magic value into the MVNETA_SERDES_CFG register. Signed-off-by: Sascha Hauer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18net: ethernet: mvneta: Fix Serdes configuration for SoCs without comphySascha Hauer1-36/+44
The MVNETA_SERDES_CFG register is only available on older SoCs like the Armada XP. On newer SoCs like the Armada 38x the fields are moved to comphy. This patch moves the writes to this register next to the comphy initialization, so that depending on the SoC either comphy or MVNETA_SERDES_CFG is configured. With this we no longer write to the MVNETA_SERDES_CFG on SoCs where it doesn't exist. Suggested-by: Russell King <[email protected]> Signed-off-by: Sascha Hauer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-06-18RISC-V: Acquire mmap lock before invoking walk_page_rangeAtish Patra1-2/+12
As per walk_page_range documentation, mmap lock should be acquired by the caller before invoking walk_page_range. mmap_assert_locked gets triggered without that. The details can be found here. http://lists.infradead.org/pipermail/linux-riscv/2020-June/010335.html Fixes: 395a21ff859c(riscv: add ARCH_HAS_SET_DIRECT_MAP support) Signed-off-by: Atish Patra <[email protected]> Reviewed-by: Michel Lespinasse <[email protected]> Reviewed-by: Zong Li <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2020-06-18RISC-V: Don't allow write+exec only page mapping request in mmapYash Shah1-0/+6
As per the table 4.4 of version "20190608-Priv-MSU-Ratified" of the RISC-V instruction set manual[0], the PTE permission bit combination of "write+exec only" is reserved for future use. Hence, don't allow such mapping request in mmap call. An issue is been reported by David Abdurachmanov, that while running stress-ng with "sysbadaddr" argument, RCU stalls are observed on RISC-V specific kernel. This issue arises when the stress-sysbadaddr request for pages with "write+exec only" permission bits and then passes the address obtain from this mmap call to various system call. For the riscv kernel, the mmap call should fail for this particular combination of permission bits since it's not valid. [0]: http://dabbelt.com/~palmer/keep/riscv-isa-manual/riscv-privileged-20190608-1.pdf Signed-off-by: Yash Shah <[email protected]> Reported-by: David Abdurachmanov <[email protected]> [Palmer: Refer to the latest ISA specification at the only link I could find, and update the terminology.] Signed-off-by: Palmer Dabbelt <[email protected]>
2020-06-19Merge tag 'amd-drm-fixes-5.8-2020-06-17' of ↵Dave Airlie10-59/+166
git://people.freedesktop.org/~agd5f/linux into drm-fixes amd-drm-fixes-5.8-2020-06-17: amdgpu: - Fix kvfree/kfree mixup - Fix hawaii device id in powertune configuration - Display FP fixes - Documentation fixes amdkfd: - devcgroup check fix Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-06-19Merge tag 'drm-intel-fixes-2020-06-18' of ↵Dave Airlie19-373/+668
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix for timeslicing and virtual engines/unpremptable requests (+ 1 dependency patch) - Fixes into TypeC register programming and interrupt storm detecting - Disable DIP on MST ports with the transcoder clock still on - Avoid missing GT workarounds at reset for HSW and older gens - Fix for unwinding multiple requests missing force restore - Fix encoder type check for DDI vswing sequence - Build warning fixes Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Powered by cgit, Gruvboxed by Blaster4385.