aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2012-10-01mac80211: Fix FC masking in BIP AAD generationJouni Malinen1-3/+8
The bits used in the mask were off-by-one and ended up masking PwrMgt, MoreData, Protected fields instead of Retry, PwrMgt, MoreData. Fix this and to mask the correct fields. While doing so, convert the code to mask the full FC using IEEE80211_FCTL_* defines similarly to how CCMP AAD is built. Since BIP is used only with broadcast/multicast management frames, the Retry field is always 0 in these frames. The Protected field is also zero to maintain backwards compatibility. As such, the incorrect mask here does not really cause any problems for valid frames. In theory, an invalid BIP frame with Retry or Protected field set to 1 could be rejected because of BIP validation. However, no such frame should show up with standard compliant implementations, so this does not cause problems in normal BIP use. Signed-off-by: Jouni Malinen <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2012-09-05mac80211: Various small fixes for cfg.c: mpath_set_pinfo()LEO Airwarosu Yoichi Shinoda1-5/+4
Various small fixes for net/mac80211/cfg.c:mpath_set_pinfo(): Initialize *pinfo before filling members in, handle MESH_PATH_RESOLVED correctly, and remove bogus assignment; result in correct display of FLAGS values and meaningful EXPTIME for expired paths in iw utility. Signed-off-by: Yoichi Shinoda <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2012-09-04nl80211: fix possible memory leak nl80211_connect()Wei Yongjun1-1/+3
connkeys is malloced in nl80211_parse_connkeys() and should be freed in the error handling case, otherwise it will cause memory leak. spatch with a semantic match is used to found this problem. (http://coccinelle.lip6.fr/) Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2012-09-04mac80211: clear bssid on auth/assoc failureEliad Peller1-0/+4
ifmgd->bssid wasn't cleared properly in some auth/assoc failure cases, causing mac80211 and the low-level driver to go out of sync. Clear ifmgd->bssid on failure, and notify the driver. Cc: [email protected] # 3.4+ Signed-off-by: Eliad Peller <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2012-08-22mac80211: fix DS to MBSS address translationThomas Pedersen1-22/+16
The destination address of unicast frames forwarded through a mesh gate was being replaced with the broadcast address. Instead leave the original destination address as the mesh DA. If the nexthop address is not in the mpath table it will be resolved. If that fails, the frame will be forwarded to known mesh gates. Reported-by: Cedric Voncken <[email protected]> Signed-off-by: Thomas Pedersen <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2012-08-02cfg80211: Clear "beacon_found" on regulatory restorePaul Stewart1-0/+1
Restore the default state to the "beacon_found" flag when the channel flags are restored. Otherwise, we can end up with a channel that we can no longer transmit on even when we can see beacons on that channel. Signed-off-by: Paul Stewart <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2012-08-02cfg80211: add channel flag to prohibit OFDM operationSeth Forshee2-0/+4
Currently the only way for wireless drivers to tell whether or not OFDM is allowed on the current channel is to check the regulatory information. However, this requires hodling cfg80211_mutex, which is not visible to the drivers. Other regulatory restrictions are provided as flags in the channel definition, so let's do similarly with OFDM. This patch adds a new flag, IEEE80211_CHAN_NO_OFDM, to tell drivers that OFDM on a channel is not allowed. This flag is set on any channels for which regulatory indicates that OFDM is prohibited. Signed-off-by: Seth Forshee <[email protected]> Tested-by: Arend van Spriel <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2012-08-01mac80211: cancel mesh path timerJohannes Berg1-0/+1
The mesh path timer needs to be canceled when leaving the mesh as otherwise it could fire after the interface has been removed already. Cc: [email protected] Signed-off-by: Johannes Berg <[email protected]>
2012-08-01mac80211: clear timer bits when disconnectingJohannes Berg2-0/+4
There's a corner case that can happen when we suspend with a timer running, then resume and disconnect. If we connect again, suspend and resume we might start timers that shouldn't be running. Reset the timer flags to avoid this. This affects both mesh and managed modes. Signed-off-by: Johannes Berg <[email protected]>
2012-07-30mac80211: don't clear sched_scan_sdata on sched scan stop requestEliad Peller1-1/+0
ieee80211_request_sched_scan_stop() cleared local->sched_scan_sdata. However, sched_scan_sdata should be cleared only after the driver calls ieee80211_sched_scan_stopped() (like with normal hw scan). Clearing sched_scan_sdata too early caused ieee80211_sched_scan_stopped_work to exit prematurely without properly cleaning all the sched scan resources and without calling cfg80211_sched_scan_stopped (so userspace wasn't notified about sched scan completion). Signed-off-by: Eliad Peller <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2012-07-30Merge remote-tracking branch 'wireless/master' into mac80211Johannes Berg4412-95763/+146493
2012-07-26bcma: add missing iounmap on error pathHauke Mehrtens1-5/+10
This should fix the problem reported by Fengguang: The coccinelle static checker emits these warnings: drivers/bcma/scan.c:466:3-9: ERROR: missing iounmap; ioremap on line 451 and execution via conditional on line 465 drivers/bcma/scan.c:540:3-9: ERROR: missing iounmap; ioremap on line 515 and execution via conditional on line 539 Reported-by: Fengguang Wu <[email protected]> Signed-off-by: Hauke Mehrtens <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2012-07-26bcma: fix regression in interrupt assignment on mipsHauke Mehrtens1-3/+3
The wrong interrupts where assigned to the cores in bcma_core_mips_init(). This caused at least my serial console not to response to any input. This was caused by this patch which changed the order of the cores in the list: commit c334e25c9f3a95f2bd6b79fedc5170f17245b1c7 Author: Rafał Miłecki <[email protected]> Date: Wed Jul 11 12:37:00 2012 +0200 bcma: add new cores at the end of list This should be fixed properly later so that the correct interrupt numbers are assigned to the cores independently from the ordering of the list. This patch restores the old behavior again. I will look into the problem more deeply later. I also changed the order of the list with the cores and their assigned interrupt number which gets printed to the log. Now they are printed in the same order like all the other lists of cores and like it was done before the patch which changed the order. Signed-off-by: Hauke Mehrtens <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2012-07-26mac80211_hwsim: fix possible race condition in usage of info->control.sta & ↵Thomas Huehn1-5/+0
control.vif info->control.sta and control.vif may only be dereferenced during the drv_tx call otherwise could lead to use-after-free bugs. Signed-off-by: Thomas Huehn <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2012-07-26be2net: Fix to parse RSS hash from Receive completions correctly.Sarveshwar Bandi1-2/+2
Wrong pointer variable is being used to parse the rss hash from receive completions leading to corrupted rss_hash values filled into skb. Signed-off-by: Sarveshwar Bandi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-26net/mlx4_en: Limit the RFS filter IDs to be < RPS_NO_FILTERAmir Vadai1-1/+1
RFS filter id can't have the special value RPS_NO_FILTER, need to skip it when allocating id's. CC: Ben Hutchings <[email protected]> Signed-off-by: Amir Vadai <[email protected]> Signed-off-by: Or Gerlitz <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-25hyperv: Add error handling to rndis_filter_device_add()Haiyang Zhang1-7/+4
Reported-by: Jason Wang <[email protected]> Signed-off-by: Haiyang Zhang <[email protected]> Reviewed-by: K. Y. Srinivasan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-25hyperv: Add a check for ring_size valueHaiyang Zhang1-1/+6
It prevents ring_size being set to a too small value. Reported-by: Jason Wang <[email protected]> Signed-off-by: Haiyang Zhang <[email protected]> Reviewed-by: K. Y. Srinivasan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-25ipv4: rt_cache_valid must check expired routesEric Dumazet1-3/+5
commit d2d68ba9fe8 (ipv4: Cache input routes in fib_info nexthops.) introduced rt_cache_valid() helper. It unfortunately doesn't check if route is expired before caching it. I noticed sk_setup_caps() was constantly called on a tcp workload. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-25net/pch_gpe: Cannot disable ethernet autonegationWei Yang2-2/+3
When attempting to disable ethernet autonegation via ethtool, the pch_gpe driver will set software reset bit of PHY chip, But control register of PHY chip of FRI2 will reenable ethernet autonegation. Signed-off-by: Wei Yang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-25qeth: repair crash in qeth_l3_vlan_rx_kill_vid()[email protected]1-0/+4
Commit efc73f4b "net: Fix memory leak - vlan_info struct" adds deletion of VLAN 0 for devices with feature NETIF_F_HW_VLAN_FILTER. For driver qeth these are the layer 3 devices. Usually there exists no separate vlan net_device for VLAN 0. Thus the qeth functions qeth_l3_free_vlan_addresses4() and qeth_l3_free_vlan_addresses6() require an extra checking if function __vlan_find_dev_deep() returns with a net_device. Cc: [email protected] Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: Frank Blaschka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-25netiucv: cleanup attribute usage[email protected]1-28/+6
Let the driver core handle device attribute creation and removal. This will simplify the code and eliminates races between attribute availability and userspace notification via uevents. Signed-off-by: Sebastian Ott <[email protected]> Signed-off-by: Frank Blaschka <[email protected]> Acked-by: Ursula Braun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-25net: wiznet add missing HAS_IOMEM dependency[email protected]1-0/+1
The "WIZnet devices" config option should depend on HAS_IOMEM as all wiznet drivers require it as well. Signed-off-by: Martin Schwidefsky <[email protected]> Signed-off-by: Frank Blaschka <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-25be2net: Missing byteswap in be_get_fw_log_level causes oops on PowerPCAnton Blanchard2-3/+4
We are seeing an oops in be_get_fw_log_level on ppc64 where we walk off the end of memory. commit 941a77d582c8 (be2net: Fix to allow get/set of debug levels in the firmware.) requires byteswapping of num_modes and num_modules. Cc: [email protected] # 3.5+ Signed-off-by: Anton Blanchard <[email protected]> Acked-by: Sathya Perla <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-25mlx4: Add support for EEH error recoveryKleber Sacilotto de Souza3-11/+93
Currently the mlx4 drivers don't have the necessary callbacks to implement EEH errors detection and recovery, so the PCI layer uses the probe and remove callbacks to try to recover the device after an error on the bus. However, these callbacks have race conditions with the internal catastrophic error recovery functions, which will also detect the error and this can cause the system to crash if both EEH and catas functions try to reset the device. This patch adds the necessary error recovery callbacks and makes sure that the internal catastrophic error functions will not try to reset the device in such scenarios. It also adds some calls to pci_channel_offline() to suppress reads/writes on the bus when the slot cannot accept I/O operations so we prevent unnecessary accesses to the bus and speed up the device removal. Signed-off-by: Kleber Sacilotto de Souza <[email protected]> Acked-by: Shlomo Pongratz <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-25wireless: reg: restore previous behaviour of chan->max_power calculationsStanislaw Gruszka1-1/+15
commit eccc068e8e84c8fe997115629925e0422a98e4de Author: Hong Wu <[email protected]> Date: Wed Jan 11 20:33:39 2012 +0200 wireless: Save original maximum regulatory transmission power for the calucation of the local maximum transmit pow changed the way we calculate chan->max_power as min(chan->max_power, chan->max_reg_power). That broke rt2x00 (and perhaps some other drivers) that do not set chan->max_power. It is not so easy to fix this problem correctly in rt2x00. According to commit eccc068e8 changelog, change claim only to save maximum regulatory power - changing setting of chan->max_power was side effect. This patch restore previous calculations of chan->max_power and do not touch chan->max_reg_power. Cc: [email protected] # 3.4+ Signed-off-by: Stanislaw Gruszka <[email protected]> Acked-by: Luis R. Rodriguez <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2012-07-24cdc-ncm: tag Ericsson WWAN devices (eg F5521gw) with FLAG_WWANDan Williams1-23/+45
Tag Ericsson NCM devices as WWAN modems, since they almost certainly all are. This way userspace clients know that the device requires further setup on the AT-capable serial ports before connectivity is available. Signed-off-by: Dan Williams <[email protected]>
2012-07-24wanmain: comparing array with NULLAlan Cox1-28/+23
gcc really should warn about these ! Signed-off-by: Alan Cox <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-24caif: fix NULL pointer checkAlan Cox1-0/+3
Reported-by: <[email protected]> Resolves-bug: http://bugzilla.kernel.org/show_bug?44441 Signed-off-by: Alan Cox <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-24team: init error value to 0 in team_netpoll_setup()Jiri Pirko1-1/+1
This will ensure correct value is returned in case the port list is empty. Signed-off-by: Jiri Pirko <[email protected]> Reported-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-24tcp: early_demux fixesEric Dumazet2-8/+6
1) Remove a non needed pskb_may_pull() in tcp_v4_early_demux() and fix a potential bug if skb->head was reallocated (iph & th pointers were not reloaded) TCP stack will pull/check headers anyway. 2) must reload iph in ip_rcv_finish() after early_demux() call since skb->head might have changed. 3) skb->dev->ifindex can be now replaced by skb->skb_iif Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-24bnx2x: Correct EEE statistics gatheringYuval Mintz2-3/+9
In boards with 4-ports, Tx LPI statistics were gathered incorrectly. This patch guarantees that each pmf will only query its own port for these statistics. Signed-off-by: Yuval Mintz <[email protected]> Signed-off-by: Eilon Greenstein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-nextLinus Torvalds1363-57829/+69993
Pull networking changes from David S Miller: 1) Remove the ipv4 routing cache. Now lookups go directly into the FIB trie and use prebuilt routes cached there. No more garbage collection, no more rDOS attacks on the routing cache. Instead we now get predictable and consistent performance, no matter what the pattern of traffic we service. This has been almost 2 years in the making. Special thanks to Julian Anastasov, Eric Dumazet, Steffen Klassert, and others who have helped along the way. I'm sure that with a change of this magnitude there will be some kind of fallout, but such things ought the be simple to fix at this point. Luckily I'm not European so I'll be around all of August to fix things :-) The major stages of this work here are each fronted by a forced merge commit whose commit message contains a top-level description of the motivations and implementation issues. 2) Pre-demux of established ipv4 TCP sockets, saves a route demux on input. 3) TCP SYN/ACK performance tweaks from Eric Dumazet. 4) Add namespace support for netfilter L4 conntrack helpers, from Gao Feng. 5) Add config mechanism for Energy Efficient Ethernet to ethtool, from Yuval Mintz. 6) Remove quadratic behavior from /proc/net/unix, from Eric Dumazet. 7) Support for connection tracker helpers in userspace, from Pablo Neira Ayuso. 8) Allow userspace driven TX load balancing functions in TEAM driver, from Jiri Pirko. 9) Kill off NLMSG_PUT and RTA_PUT macros, more gross stuff with embedded gotos. 10) TCP Small Queues, essentially minimize the amount of TCP data queued up in the packet scheduler layer. Whereas the existing BQL (Byte Queue Limits) limits the pkt_sched --> netdevice queuing levels, this controls the TCP --> pkt_sched queueing levels. From Eric Dumazet. 11) Reduce the number of get_page/put_page ops done on SKB fragments, from Alexander Duyck. 12) Implement protection against blind resets in TCP (RFC 5961), from Eric Dumazet. 13) Support the client side of TCP Fast Open, basically the ability to send data in the SYN exchange, from Yuchung Cheng. Basically, the sender queues up data with a sendmsg() call using MSG_FASTOPEN, then they do the connect() which emits the queued up fastopen data. 14) Avoid all the problems we get into in TCP when timers or PMTU events hit a locked socket. The TCP Small Queues changes added a tcp_release_cb() that allows us to queue work up to the release_sock() caller, and that's what we use here too. From Eric Dumazet. 15) Zero copy on TX support for TUN driver, from Michael S. Tsirkin. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1870 commits) genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEP r8169: revert "add byte queue limit support". ipv4: Change rt->rt_iif encoding. net: Make skb->skb_iif always track skb->dev ipv4: Prepare for change of rt->rt_iif encoding. ipv4: Remove all RTCF_DIRECTSRC handliing. ipv4: Really ignore ICMP address requests/replies. decnet: Don't set RTCF_DIRECTSRC. net/ipv4/ip_vti.c: Fix __rcu warnings detected by sparse. ipv4: Remove redundant assignment rds: set correct msg_namelen openvswitch: potential NULL deref in sample() tcp: dont drop MTU reduction indications bnx2x: Add new 57840 device IDs tcp: avoid oops in tcp_metrics and reset tcpm_stamp niu: Change niu_rbr_fill() to use unlikely() to check niu_rbr_add_page() return value niu: Fix to check for dma mapping errors. net: Fix references to out-of-scope variables in put_cmsg_compat() net: ethernet: davinci_emac: add pm_runtime support net: ethernet: davinci_emac: Remove unnecessary #include ...
2012-07-24Merge branch 'for-linus' of ↵Linus Torvalds295-1251/+678
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 changes from Martin Schwidefsky: "No new functions, a few changes to make the code more robust, some cleanups and bug fixes." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (21 commits) s390/vtimer: rework virtual timer interface s390/dis: Add the servc instruction to the disassembler. s390/comments: unify copyright messages and remove file names s390/lgr: Add init check to lgr_info_log() s390/cpu init: use __get_cpu_var instead of per_cpu s390/idle: reduce size of s390_idle_data structure s390/idle: fix sequence handling vs cpu hotplug s390/ap: resend enable adapter interrupt request. s390/hypfs: Add missing get_next_ino() s390/dasd: add shutdown action s390/ipl: Fix ipib handling for "dumpreipl" shutdown action s390/smp: make absolute lowcore / cpu restart parameter accesses more robust s390/vmlogrdr: cleanup driver attribute usage s390/vmlogrdr: cleanup device attribute usage s390/ccwgroup: remove unused ccwgroup_device member s390/cio/chp: cleanup attribute usage s390/sigp: use sigp order code defines in assembly code s390/smp: use sigp cpu status definitions s390/smp/kvm: unifiy sigp definitions s390/smp: remove redundant check ...
2012-07-24Merge branch 'for-linus' of ↵Linus Torvalds38-506/+1298
git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin Pull blackfin changes from Bob Liu: "The big changes are adding PM and HDMI support for bf60x, other patches are various bug fix and code cleanup." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lliubbo/blackfin: (48 commits) bf60x: fix build warning PM: add BF60x flash suspend and resume support blackfin: twi: read twi mmr via bfin_read macro dpm: deepsleep: reserve stack bf60x: cpufreq: fix anomaly 05000273 bf609: add adv7511 display support blackfin: cplb-nompu: fix ROM cplb size for bf609-ezkit bf60x: Add double fault, hardware error and NMI SEC handler bf60x: update anomaly id in serial and twi driver headers. bf60x: vs6624 pin update bf60x: add default anomaly setting. bf60x: update bf60x anomaly list. bf60x: sec: Enable sec interrupt source priority configuration. bf60x: sec: Clean up interrupt initialization code for SEC. bf609: reuse bf5xx-i2s-pcm.c as i2s pcm driver bf561: add capabilities in adv7183_inputs bf609: convert vs6624 blank_clocks to black_pixels blackfin: fix musb macro name cleanup: sec and linkport only built on bf60x bfin: pint: add pint suspend and resume ...
2012-07-24Merge tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreamingLinus Torvalds10-24/+373
Pull C6X changes from Mark Salter: - remove use of legacy irqs which really wasn't needed - add support for C66x SoC on EVMC6678 board - clean up compiler warning * tag 'for-linus' of git://linux-c6x.org/git/projects/linux-c6x-upstreaming: C6X: clean up compiler warning C6X: add basic support for TMS320C6678 SoC C6X: remove dependence on legacy IRQs C6X: remove megamod-pic requirement on direct-mapped core pic
2012-07-24mac80211: fix scan_sdata assignmentJohannes Berg1-1/+1
We need to use RCU to assign scan_sdata. Signed-off-by: Johannes Berg <[email protected]>
2012-07-24genetlink: define lockdep_genl_is_held() when CONFIG_LOCKDEPWANG Cong2-2/+2
lockdep_is_held() is defined when CONFIG_LOCKDEP, not CONFIG_PROVE_LOCKING. Cc: "David S. Miller" <[email protected]> Cc: Jesse Gross <[email protected]> Signed-off-by: WANG Cong <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2012-07-24bf60x: fix build warningBob Liu4-10/+9
Fix several build warning while using bf609-ezkit_defconfig. Signed-off-by: Bob Liu <[email protected]>
2012-07-24PM: add BF60x flash suspend and resume supportSteven Miao1-1/+16
Signed-off-by: Steven Miao <[email protected]> Signed-off-by: Bob Liu <[email protected]>
2012-07-24blackfin: twi: read twi mmr via bfin_read macroSonic Zhang1-2/+2
Signed-off-by: Sonic Zhang <[email protected]> Signed-off-by: Bob Liu <[email protected]>
2012-07-24dpm: deepsleep: reserve stackSteven Miao1-1/+1
Reserve 12 bytes on the stack for deepsleep use. Signed-off-by: Steven Miao <[email protected]> Signed-off-by: Bob Liu <[email protected]>
2012-07-24bf60x: cpufreq: fix anomaly 05000273Sonic Zhang1-1/+2
Anomaly 05000273 doesn't apply to bf60x. Signed-off-by: Sonic Zhang <[email protected]> Signed-off-by: Bob Liu <[email protected]>
2012-07-24bf609: add adv7511 display supportScott Jiang1-11/+90
Signed-off-by: Scott Jiang <[email protected]> Signed-off-by: Bob Liu <[email protected]>
2012-07-24blackfin: cplb-nompu: fix ROM cplb size for bf609-ezkitBob Liu1-0/+8
In user xip test, there is a cplb error when ROMKERNEL try to mount romfs using 'mount -t romfs /dev/mtdblock2 /mnt', becasue the CPLB setting is not correct. Signed-off-by: Bob Liu <[email protected]>
2012-07-24bf60x: Add double fault, hardware error and NMI SEC handlerSonic Zhang2-1/+35
Signed-off-by: Sonic Zhang <[email protected]> Signed-off-by: Bob Liu <[email protected]>
2012-07-24bf60x: update anomaly id in serial and twi driver headers.Sonic Zhang2-2/+2
Signed-off-by: Sonic Zhang <[email protected]> Signed-off-by: Bob Liu <[email protected]>
2012-07-24bf60x: vs6624 pin updateVivi Li1-1/+3
Change ce pin to PE4 according to new adaptor board and re-define ppi for vs6624 to avoid gpio conflict. Signed-off-by: Vivi Li <[email protected]> Signed-off-by: Bob Liu <[email protected]>
2012-07-24bf60x: add default anomaly setting.Sonic Zhang1-0/+2
Signed-off-by: Sonic Zhang <[email protected]> Signed-off-by: Bob Liu <[email protected]>
2012-07-24bf60x: update bf60x anomaly list.Sonic Zhang1-88/+56
Signed-off-by: Sonic Zhang <[email protected]> Signed-off-by: Bob Liu <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.