| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Bail out on using the tunnel dst template from other than netdev family.
Add the infrastructure to check for the family in objects.
Fixes: af308b94a2a4 ("netfilter: nf_tables: add tunnel support")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
commit c7aab4f17021 ("netfilter: nf_conntrack_tcp: re-init for syn packets
only") introduces a bug where SYNs in ORIGINAL direction on reused 5-tuple
result in incorrect window scale negotiation. This commit merged the SYN
re-initialization and simultaneous open or SYN retransmits cases. Merging
this block added the logic in tcp_init_sender() that performed window scale
negotiation to the retransmitted syn case. Previously. this would only
result in updating the sender's scale and flags. After the merge the
additional logic results in improperly clearing the scale in ORIGINAL
direction before any packets in the REPLY direction are received. This
results in packets incorrectly being marked invalid for being
out-of-window.
This can be reproduced with the following trace:
Packet Sequence:
> Flags [S], seq 1687765604, win 62727, options [.. wscale 7], length 0
> Flags [S], seq 1944817196, win 62727, options [.. wscale 7], length 0
In order to fix the issue, only evaluate window negotiation for packets
in the REPLY direction. This was tested with simultaneous open, fast
open, and the above reproduction.
Fixes: c7aab4f17021 ("netfilter: nf_conntrack_tcp: re-init for syn packets only")
Signed-off-by: Ryan Schaefer <[email protected]>
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
The function sev_map_percpu_data() checks if it is running on an SEV
platform by checking the CC_ATTR_GUEST_MEM_ENCRYPT attribute. However,
this attribute is also defined for TDX.
To avoid false positives, add a cc_vendor check.
Signed-off-by: Kirill A. Shutemov <[email protected]>
Fixes: 4d96f9109109 ("x86/sev: Replace occurrences of sev_active() with cc_platform_has()")
Suggested-by: Borislav Petkov (AMD) <[email protected]>
Acked-by: David Rientjes <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
Since commit b0563468eeac ("x86/CPU/AMD: Disable XSAVES on AMD family 0x17")
kernel unconditionally clears the XSAVES CPU feature bit on Zen1/2 CPUs.
Because KVM CPU caps are initialized from the kernel boot CPU features this
makes the XSAVES feature also unavailable for KVM guests in this case.
At the same time the XSAVEC feature is left enabled.
Unfortunately, having XSAVEC but no XSAVES in CPUID breaks Hyper-V enabled
Windows Server 2016 VMs that have more than one vCPU.
Let's at least give users hint in the kernel log what could be wrong since
these VMs currently simply hang at boot with a black screen - giving no
clue what suddenly broke them and how to make them work again.
Trigger the kernel message hint based on the particular guest ID written to
the Guest OS Identity Hyper-V MSR implemented by KVM.
Defer this check to when the L1 Hyper-V hypervisor enables SVM in EFER
since we want to limit this message to Hyper-V enabled Windows guests only
(Windows session running nested as L2) but the actual Guest OS Identity MSR
write is done by L1 and happens before it enables SVM.
Fixes: b0563468eeac ("x86/CPU/AMD: Disable XSAVES on AMD family 0x17")
Signed-off-by: Maciej S. Szmigiero <[email protected]>
Message-Id: <b83ab45c5e239e5d148b0ae7750133a67ac9575c.1706127425.git.maciej.szmigiero@oracle.com>
[Move some checks before mutex_lock(), rename function. - Paolo]
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
As the kvm api(https://docs.kernel.org/virt/kvm/api.html) reads,
KVM_CREATE_PIT2 call is only valid after enabling in-kernel irqchip
support via KVM_CREATE_IRQCHIP.
Without this check, I can create PIT first and enable irqchip-split
then, which may cause the PIT invalid because of lacking of in-kernel
PIC to inject the interrupt.
Signed-off-by: Tengfei Yu <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Paolo Bonzini <[email protected]>
|
|
This patch is to eliminate interrupt warning below:
"[drm] Fence fallback timer expired on ring sdma0.0".
An early vm pt clearing job is sent to SDMA ahead of interrupt enabled.
And re-locating the drm client creation following after drm_dev_register
looks like a more proper flow.
v2: wrap the drm client creation
Fixes: 1819200166ce ("drm/amdkfd: Export DMABufs from KFD using GEM handles")
Signed-off-by: Le Ma <[email protected]>
Reviewed-by: Felix Kuehling <[email protected]>
Reviewed-by: Lijo Lazar <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
|
|
The eventfs_find_events() code tries to walk up the tree to find the
event directory that a dentry belongs to, in order to then find the
eventfs inode that is associated with that event directory.
However, it uses an odd combination of walking the dentry parent,
looking up the eventfs inode associated with that, and then looking up
the dentry from there. Repeat.
But the code shouldn't have back-pointers to dentries in the first
place, and it should just walk the dentry parenthood chain directly.
Similarly, 'set_top_events_ownership()' looks up the dentry from the
eventfs inode, but the only reason it wants a dentry is to look up the
superblock in order to look up the root dentry.
But it already has the real filesystem inode, which has that same
superblock pointer. So just pass in the superblock pointer using the
information that's already there, instead of looking up extraneous data
that is irrelevant.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]/
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Ajay Kaher <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Fixes: c1504e510238 ("eventfs: Implement eventfs dir creation functions")
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The tracefs-specific fields in the inode were not initialized before the
inode was exposed to others through the dentry with 'd_instantiate()'.
Move the field initializations up to before the d_instantiate.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Ajay Kaher <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-lkp/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
eventfs uses the tracefs_inode and assumes that it's already initialized
to zero. That is, it doesn't set fields to zero (like ti->private) after
getting its tracefs_inode. This causes bugs due to stale values.
Just initialize the entire structure to zero on allocation so there isn't
any more surprises.
This is a partial fix to access to ti->private. The assignment still needs
to be made before the dentry is instantiated.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Cc: Masami Hiramatsu <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Desnoyers <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Ajay Kaher <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Fixes: 5790b1fb3d672 ("eventfs: Remove eventfs_file and just use eventfs_inode")
Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-lkp/[email protected]
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
The return type for ring_buffer_poll_wait() is __poll_t. This is behind
the scenes an unsigned where we can set event bits. In case of a
non-allocated CPU, we do return instead -EINVAL (0xffffffea). Lucky us,
this ends up setting few error bits (EPOLLERR | EPOLLHUP | EPOLLNVAL), so
user-space at least is aware something went wrong.
Nonetheless, this is an incorrect code. Replace that -EINVAL with a
proper EPOLLERR to clean that output. As this doesn't change the
behaviour, there's no need to treat this change as a bug fix.
Link: https://lore.kernel.org/linux-trace-kernel/[email protected]
Cc: [email protected]
Fixes: 6721cb6002262 ("ring-buffer: Do not poll non allocated cpu buffers")
Signed-off-by: Vincent Donnefort <[email protected]>
Signed-off-by: Steven Rostedt (Google) <[email protected]>
|
|
syzbot has found a type mismatch between a USB pipe and the transfer
endpoint, which is triggered by the bcm5974 driver[1].
This driver expects the device to provide input interrupt endpoints and
if that is not the case, the driver registration should terminate.
Repros are available to reproduce this issue with a certain setup for
the dummy_hcd, leading to an interrupt/bulk mismatch which is caught in
the USB core after calling usb_submit_urb() with the following message:
"BOGUS urb xfer, pipe 1 != type 3"
Some other device drivers (like the appletouch driver bcm5974 is mainly
based on) provide some checking mechanism to make sure that an IN
interrupt endpoint is available. In this particular case the endpoint
addresses are provided by a config table, so the checking can be
targeted to the provided endpoints.
Add some basic checking to guarantee that the endpoints available match
the expected type for both the trackpad and button endpoints.
This issue was only found for the trackpad endpoint, but the checking
has been added to the button endpoint as well for the same reasons.
Given that there was never a check for the endpoint type, this bug has
been there since the first implementation of the driver (f89bd95c5c94).
[1] https://syzkaller.appspot.com/bug?extid=348331f63b034f89b622
Fixes: f89bd95c5c94 ("Input: bcm5974 - add driver for Macbook Air and Pro Penryn touchpads")
Signed-off-by: Javier Carrasco <[email protected]>
Reported-and-tested-by: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Six small fixes. Five are obvious and in drivers. The last one is a
core fix to remove the host lock acquisition and release, caused by a
dynamic check of host_busy, in the error handling loop which has been
reported to cause lockups"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: storvsc: Fix ring buffer size calculation
scsi: core: Move scsi_host_busy() out of host lock for waking up EH handler
scsi: MAINTAINERS: Update ibmvscsi_tgt maintainer
scsi: initio: Remove redundant variable 'rb'
scsi: virtio_scsi: Remove duplicate check if queue is broken
scsi: isci: Fix an error code problem in isci_io_request_build()
|
|
sources
To pick up the changes in:
1ab33c03145d0f6c ("asm-generic: make sparse happy with odd-sized put_unaligned_*()")
Addressing this perf tools build warning:
Warning: Kernel ABI header differences:
diff -u tools/include/asm-generic/unaligned.h include/asm-generic/unaligned.h
Cc: Adrian Hunter <[email protected]>
Cc: Dmitry Torokhov <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Namhyung Kim <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
l2_tos_ttl_inherit.sh verifies the inheritance of tos and ttl
for GRETAP, VXLAN and GENEVE.
Before testing it checks if the required module is available
and if not skips the tests accordingly.
Currently only GRETAP and VXLAN are tested because the GENEVE
module is missing.
Fixes: b690842d12fd ("selftests/net: test l2 tunnel TOS/TTL inheriting")
Signed-off-by: Matthias May <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The i2c host patches are now set to be merged into the following
repository:
git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux.git
Cc: Wolfram Sang <[email protected]>
Acked-by: Wolfram Sang <[email protected]>
Signed-off-by: Andi Shyti <[email protected]>
|
|
The PCI endpoint subsystem is evolving at a rate I cannot keep up with,
therefore I am standing down as a maintainer handing over to Manivannan
(currently reviewer for this code) and Krzysztof who are doing an excellent
job on the matter - they don't need my help any longer.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Acked-by: Manivannan Sadhasivam <[email protected]>
Cc: Krzysztof Wilczyński <[email protected]>
|
|
A last minute revert in 6.7-final introduced a potential deadlock when
enabling ASPM during probe of Qualcomm PCIe controllers as reported by
lockdep:
============================================
WARNING: possible recursive locking detected
6.7.0 #40 Not tainted
--------------------------------------------
kworker/u16:5/90 is trying to acquire lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pcie_aspm_pm_state_change+0x58/0xdc
but task is already holding lock:
ffffacfa78ced000 (pci_bus_sem){++++}-{3:3}, at: pci_walk_bus+0x34/0xbc
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0
----
lock(pci_bus_sem);
lock(pci_bus_sem);
*** DEADLOCK ***
Call trace:
print_deadlock_bug+0x25c/0x348
__lock_acquire+0x10a4/0x2064
lock_acquire+0x1e8/0x318
down_read+0x60/0x184
pcie_aspm_pm_state_change+0x58/0xdc
pci_set_full_power_state+0xa8/0x114
pci_set_power_state+0xc4/0x120
qcom_pcie_enable_aspm+0x1c/0x3c [pcie_qcom]
pci_walk_bus+0x64/0xbc
qcom_pcie_host_post_init_2_7_0+0x28/0x34 [pcie_qcom]
The deadlock can easily be reproduced on machines like the Lenovo ThinkPad
X13s by adding a delay to increase the race window during asynchronous
probe where another thread can take a write lock.
Add a new pci_set_power_state_locked() and associated helper functions that
can be called with the PCI bus semaphore held to avoid taking the read lock
twice.
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
Fixes: f93e71aea6c6 ("Revert "PCI/ASPM: Remove pcie_aspm_pm_state_change()"")
Signed-off-by: Johan Hovold <[email protected]>
Signed-off-by: Bjorn Helgaas <[email protected]>
Cc: <[email protected]> # 6.7
|
|
Geert Uytterhoeven reported that commit 4e244c10eab3 ("kconfig: remove
unneeded symbol_empty variable") changed the default value of
CONFIG_LOG_CPU_MAX_BUF_SHIFT from 12 to 0.
As it turned out, this is an undefined behavior because sym_calc_value()
stopped setting the sym->curr.tri field for 'int', 'hex', and 'string'
symbols.
This commit restores the original behavior, where 'int', 'hex', 'string'
symbols are interpreted as false if used in boolean contexts.
CONFIG_LOG_CPU_MAX_BUF_SHIFT will default to 12 again, irrespective
of CONFIG_BASE_SMALL. Presumably, this is not the intended behavior,
as already reported [1], but this is another issue that should be
addressed by a separate patch.
[1]: https://lore.kernel.org/all/[email protected]/
Fixes: 4e244c10eab3 ("kconfig: remove unneeded symbol_empty variable")
Reported-by: Geert Uytterhoeven <[email protected]>
Closes: https://lore.kernel.org/all/CAMuHMdWm6u1wX7efZQf=2XUAHascps76YQac6rdnQGhc8nop_Q@mail.gmail.com/
Tested-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
DMA buffers allocated from the CMA dma-buf heap get counted under
RssFile for processes that map them and trigger page faults. In
addition to the incorrect accounting reported to userspace, reclaim
behavior was influenced by the MM_FILEPAGES counter until linux 6.8, but
this memory is not reclaimable. [1] Change the CMA dma-buf heap to set
VM_PFNMAP on the VMA so MM does not poke at the memory managed by this
dma-buf heap, and use vmf_insert_pfn to correct the RSS accounting.
The system dma-buf heap does not suffer from this issue since
remap_pfn_range is used during the mmap of the buffer, which also sets
VM_PFNMAP on the VMA.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/mm/vmscan.c?id=fb46e22a9e3863e08aef8815df9f17d0f4b9aede
Fixes: b61614ec318a ("dma-buf: heaps: Add CMA heap to dmabuf heaps")
Signed-off-by: T.J. Mercier <[email protected]>
Acked-by: Christian König <[email protected]>
Signed-off-by: Sumit Semwal <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The new installkernel application that is now included in systemd-udev
package allows installation although destination files are already present
in the boot directory of the kernel package, but is failing with the
implemented workaround for the old installkernel application from grubby
package.
For the new installkernel application, as Davide says:
<<The %post currently does a shuffling dance before calling installkernel.
This isn't actually necessary afaict, and the current implementation
ends up triggering downstream issues such as
https://github.com/systemd/systemd/issues/29568
This commit simplifies the logic to remove the shuffling. For reference,
the original logic was added in commit 3c9c7a14b627("rpm-pkg: add %post
section to create initramfs and grub hooks").>>
But we need to keep the old behavior as well, because the old installkernel
application from grubby package, does not allow this simplification and
we need to be backward compatible to avoid issues with the different
packages.
Mimic Fedora shipping process and store vmlinuz, config amd System.map
in the module directory instead of the boot directory. In this way, we will
avoid the commented problem for all the cases, because the new destination
files are not going to exist in the boot directory of the kernel package.
Replace installkernel tool with kernel-install tool, because the latter is
more complete.
Besides, after installkernel tool execution, check to complete if the
correct package files vmlinuz, System.map and config files are present
in /boot directory, and if necessary, copy manually for install operation.
In this way, take into account if files were not previously copied from
/usr/lib/kernel/install.d/* scripts and if the suitable files for the
requested package are present (it could be others if the rpm files were
replace with a new pacakge with the same release and a different build).
Tested with Fedora 38, Fedora 39, RHEL 9, Oracle Linux 9.3,
openSUSE Tumbleweed and openMandrive ROME, using dnf/zypper and rpm tools.
cc: [email protected]
Co-Developed-by: Davide Cavalca <[email protected]>
Signed-off-by: Jose Ignacio Tornos Martinez <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
This is needed for the future (post make-4.4.1) versions of gnu make.
Starting from https://git.savannah.gnu.org/cgit/make.git/commit/?id=07fcee35f058a876447c8a021f9eb1943f902534
gnu make won't allow conditionals to follow recipe prefix.
For example there is a tab followed by ifeq on line 324 in the root Makefile.
With the new make this conditional causes the following
$ make cpu.o
/home/dgoncharov/src/linux-kbuild/Makefile:2063: *** missing 'endif'. Stop.
make: *** [Makefile:240: __sub-make] Error 2
This patch replaces tabs followed by conditionals with 8 spaces.
See https://savannah.gnu.org/bugs/?64185 and
https://savannah.gnu.org/bugs/?64259 for details.
Signed-off-by: Dmitry Goncharov <[email protected]>
Reported-by: Martin Dorey <[email protected]>
Reviewed-by: Miguel Ojeda <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Aiden Leong reported modpost fails to build on macOS since commit
16a473f60edc ("modpost: inform compilers that fatal() never returns"):
scripts/mod/modpost.c:93:21: error: aliases are not supported on darwin
Nathan's research indicates that Darwin seems to support weak aliases
at least [1]. Although the situation might be improved in future Clang
versions, we can achieve a similar outcome without relying on it.
This commit makes fatal() a macro of error() + exit(1) in modpost.h, as
compilers recognize that exit() never returns.
[1]: https://github.com/llvm/llvm-project/issues/71001
Fixes: 16a473f60edc ("modpost: inform compilers that fatal() never returns")
Reported-by: Aiden Leong <[email protected]>
Closes: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
W=c and W=e are supported.
Signed-off-by: Masahiro Yamada <[email protected]>
Reviewed-by: Nicolas Schier <[email protected]>
|
|
There currently exists two thinkpad headset jack fixups:
ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK
ALC285_FIXUP_THINKPAD_HEADSET_JACK
The latter is applied to alc285 and alc287 thinkpads which contain
bass speakers.
However, the former was only being applied to alc285 thinkpads,
leaving non-bass alc287 thinkpads with no headset button controls.
This patch fixes that by adding ALC285_FIXUP_THINKPAD_NO_BASS_SPK_HEADSET_JACK
to the alc287 chains, allowing the detection of headset buttons.
Signed-off-by: José Relvas <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
When using hotplug and bringing up a 32-bit CPU, ask the firmware about the
BTLB information to set up the static (block) TLB entries.
For that write access to the static btlb_info struct is needed, but
since it is marked __ro_after_init the kernel segfaults with missing
write permissions.
Fix the crash by dropping the __ro_after_init annotation.
Fixes: e5ef93d02d6c ("parisc: BTLB: Initialize BTLB tables at CPU startup")
Signed-off-by: Helge Deller <[email protected]>
Cc: <[email protected]> # v6.6+
|
|
ASMedia have confirmed that all ASM106x parts currently listed in
ahci_pci_tbl[] suffer from the 43-bit DMA address limitation that we ran
into on the ASM1061, and therefore, we need to apply the quirk added by
commit 20730e9b2778 ("ahci: add 43-bit DMA address quirk for ASMedia
ASM1061 controllers") to the other supported ASM106x parts as well.
Cc: [email protected]
Link: https://lore.kernel.org/linux-ide/ZbopwKZJAKQRA4Xv@x1-carbon/
Signed-off-by: Lennert Buytenhek <[email protected]>
[cassel: add link to ASMedia confirmation email]
Signed-off-by: Niklas Cassel <[email protected]>
|
|
Follow the docs at Documentation/bpf/kfuncs.rst:
- declare the function with `__bpf_kfunc`
- disables missing prototype warnings, which allows to remove them from
include/linux/hid-bpf.h
Removing the prototypes is not an issue because we currently have to
redeclare them when writing the BPF program. They will eventually be
generated by bpftool directly AFAIU.
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Turns out that I got my reference counts wrong and each successful
bus_find_device() actually calls get_device(), and we need to manually
call put_device().
Ensure each bus_find_device() gets a matching put_device() when releasing
the bpf programs and fix all the error paths.
Cc: <[email protected]>
Fixes: f5c27da4e3c8 ("HID: initial BPF implementation")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
When the kfunc hid_bpf_attach_prog() is called, we called twice fdget():
one for fetching the type of the bpf program, and one for actually
attaching the program to the device.
The problem is that between those two calls, we have no guarantees that
the prog_fd is still the same file descriptor for the given program.
Solve this by calling bpf_prog_get() earlier, and use this to fetch the
program type.
Reported-by: Dan Carpenter <[email protected]>
Link: https://lore.kernel.org/bpf/CAO-hwJJ8vh8JD3-P43L-_CLNmPx0hWj44aom0O838vfP4=_1CA@mail.gmail.com/T/#t
Cc: <[email protected]>
Fixes: f5c27da4e3c8 ("HID: initial BPF implementation")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Benjamin Tissoires <[email protected]>
|
|
Update the USB serial option driver support for the Fibocom
FM101-GL
LTE modules as there are actually several different variants.
- VID:PID 2cb7:01a3, FM101-GL are laptop M.2 cards (with
MBIM interfaces for /Linux/Chrome OS)
0x01a3:mbim,gnss
Here are the outputs of usb-devices:
T: Bus=04 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=5000 MxCh= 0
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 1
P: Vendor=2cb7 ProdID=01a3 Rev=05.04
S: Manufacturer=Fibocom Wireless Inc.
S: Product=Fibocom FM101-GL Module
S: SerialNumber=5ccd5cd4
C: #Ifs= 3 Cfg#= 1 Atr=a0 MxPwr=896mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(commc) Sub=0e Prot=00 Driver=cdc_mbim
E: Ad=81(I) Atr=03(Int.) MxPS= 64 Ivl=32ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim
E: Ad=0f(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=8e(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=40 Driver=option
E: Ad=01(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms
Signed-off-by: Puliang Lu <[email protected]>
Cc: [email protected]
Signed-off-by: Johan Hovold <[email protected]>
|
|
[BUG]
There is a syzbot crash, triggered by the ASSERT() during subvolume
creation:
assertion failed: !anon_dev, in fs/btrfs/disk-io.c:1319
------------[ cut here ]------------
kernel BUG at fs/btrfs/disk-io.c:1319!
invalid opcode: 0000 [#1] PREEMPT SMP KASAN
RIP: 0010:btrfs_get_root_ref.part.0+0x9aa/0xa60
<TASK>
btrfs_get_new_fs_root+0xd3/0xf0
create_subvol+0xd02/0x1650
btrfs_mksubvol+0xe95/0x12b0
__btrfs_ioctl_snap_create+0x2f9/0x4f0
btrfs_ioctl_snap_create+0x16b/0x200
btrfs_ioctl+0x35f0/0x5cf0
__x64_sys_ioctl+0x19d/0x210
do_syscall_64+0x3f/0xe0
entry_SYSCALL_64_after_hwframe+0x63/0x6b
---[ end trace 0000000000000000 ]---
[CAUSE]
During create_subvol(), after inserting root item for the newly created
subvolume, we would trigger btrfs_get_new_fs_root() to get the
btrfs_root of that subvolume.
The idea here is, we have preallocated an anonymous device number for
the subvolume, thus we can assign it to the new subvolume.
But there is really nothing preventing things like backref walk to read
the new subvolume.
If that happens before we call btrfs_get_new_fs_root(), the subvolume
would be read out, with a new anonymous device number assigned already.
In that case, we would trigger ASSERT(), as we really expect no one to
read out that subvolume (which is not yet accessible from the fs).
But things like backref walk is still possible to trigger the read on
the subvolume.
Thus our assumption on the ASSERT() is not correct in the first place.
[FIX]
Fix it by removing the ASSERT(), and just free the @anon_dev, reset it
to 0, and continue.
If the subvolume tree is read out by something else, it should have
already get a new anon_dev assigned thus we only need to free the
preallocated one.
Reported-by: Chenyuan Yang <[email protected]>
Fixes: 2dfb1e43f57d ("btrfs: preallocate anon block device at first phase of snapshot creation")
CC: [email protected] # 5.15+
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: Qu Wenruo <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
If a subvolume still exists, forbid deleting its qgroup 0/subvolid.
This behavior generally leads to incorrect behavior in squotas and
doesn't have a legitimate purpose.
Fixes: cecbb533b5fc ("btrfs: record simple quota deltas in delayed refs")
CC: [email protected] # 5.4+
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Boris Burkov <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Creating a qgroup 0/subvolid leads to various races and it isn't
helpful, because you can't specify a subvol id when creating a subvol,
so you can't be sure it will be the right one. Any requirements on the
automatic subvol can be gratified by using a higher level qgroup and the
inheritance parameters of subvol creation.
Fixes: cecbb533b5fc ("btrfs: record simple quota deltas in delayed refs")
CC: [email protected] # 4.14+
Reviewed-by: Qu Wenruo <[email protected]>
Signed-off-by: Boris Burkov <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
When some ioctl flags are checked we return EOPNOTSUPP, like for
BTRFS_SCRUB_SUPPORTED_FLAGS, BTRFS_SUBVOL_CREATE_ARGS_MASK or fallocate
modes. The EINVAL is supposed to be for a supported but invalid
values or combination of options. Fix that when checking send flags so
it's consistent with the rest.
CC: [email protected] # 4.14+
Link: https://lore.kernel.org/linux-btrfs/CAL3q7H5rryOLzp3EKq8RTbjMHMHeaJubfpsVLF6H4qJnKCUR1w@mail.gmail.com/
Reviewed-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs fixes from Gao Xiang:
- fix an infinite loop issue of sub-page compressed data support found
with lengthy stress tests on a 64k-page arm64 VM
- optimize the temporary buffer allocation for low-memory scenarios,
which can reduce 20.21% on average under a heavy multi-app launch
benchmark workload
- get rid of unnecessary GFP_NOFS
* tag 'erofs-for-6.8-rc3-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
erofs: relaxed temporary buffers allocation on readahead
erofs: fix infinite loop due to a race of filling compressed_bvecs
erofs: get rid of unneeded GFP_NOFS
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-01-29 (e1000e, ixgbe)
This series contains updates to e1000e and ixgbe drivers.
Jake corrects values used for maximum frequency adjustment for e1000e.
Christophe Jaillet adjusts error handling path so that semaphore is
released on ixgbe.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
ixgbe: Fix an error handling path in ixgbe_read_iosf_sb_reg_x550()
e1000e: correct maximum frequency adjustment values
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When port function state change is requested, and when the driver
does not support it, it refers to the hw address attribute instead
of state attribute. Seems like a copy paste error.
Fix it by referring to the port function state attribute.
Fixes: c0bea69d1ca7 ("devlink: Validate port function request")
Signed-off-by: Parav Pandit <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The original idea of the delay_time check was to not apply multicast
snooping too early when an MLD querier appears. And to instead wait at
least for MLD reports to arrive before switching from flooding to group
based, MLD snooped forwarding, to avoid temporary packet loss.
However in a batman-adv mesh network it was noticed that after 248 days of
uptime 32bit MIPS based devices would start to signal that they had
stopped applying multicast snooping due to missing queriers - even though
they were the elected querier and still sending MLD queries themselves.
While time_is_before_jiffies() generally is safe against jiffies
wrap-arounds, like the code comments in jiffies.h explain, it won't
be able to track a difference larger than ULONG_MAX/2. With a 32bit
large jiffies and one jiffies tick every 10ms (CONFIG_HZ=100) on these MIPS
devices running OpenWrt this would result in a difference larger than
ULONG_MAX/2 after 248 (= 2^32/100/60/60/24/2) days and
time_is_before_jiffies() would then start to return false instead of
true. Leading to multicast snooping not being applied to multicast
packets anymore.
Fix this issue by using a proper timer_list object which won't have this
ULONG_MAX/2 difference limitation.
Fixes: b00589af3b04 ("bridge: disable snooping if there is no querier")
Signed-off-by: Linus Lüssing <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
One of the test cases in the test_bridge_backup_port.sh selftest relies
on a matchall classifier to drop unrelated traffic so that the Tx drop
counter on the VXLAN device will only be incremented as a result of
traffic generated by the test.
However, the configuration option for the matchall classifier is
missing from the configuration file which might explain the failures we
see in the netdev CI [1].
Fix by adding CONFIG_NET_CLS_MATCHALL to the configuration file.
[1]
# Backup nexthop ID - invalid IDs
# -------------------------------
[...]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
# TEST: IPv6 address family nexthop as backup nexthop [ OK ]
# TEST: No forwarding out of swp1 [ OK ]
# TEST: Forwarding out of vx0 [ OK ]
# TEST: No forwarding using backup nexthop ID [ OK ]
# TEST: Tx drop increased [FAIL]
[...]
Fixes: b408453053fb ("selftests: net: Add bridge backup port and backup nexthop ID test")
Signed-off-by: Ido Schimmel <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When probing the open-dice driver with PROVE_LOCKING=y, lockdep
complains that the mutex in 'drvdata->lock' has a non-static key:
| INFO: trying to register non-static key.
| The code is fine but needs lockdep annotation, or maybe
| you didn't initialize this object before use?
| turning off the locking correctness validator.
Fix the problem by initialising the mutex memory with mutex_init()
instead of __MUTEX_INITIALIZER().
Cc: Arnd Bergmann <[email protected]>
Cc: David Brazdil <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
In remoteproc shutdown sequence, rpmsg_remove will get called which
would depopulate all the child nodes that have been created during
rpmsg_probe. This would result in cb_remove call for all the context
banks for the remoteproc. In cb_remove function, session 0 is
getting skipped which is not correct as session 0 will never become
available again. Add changes to mark session 0 also as invalid.
Fixes: f6f9279f2bf0 ("misc: fastrpc: Add Qualcomm fastrpc basic driver model")
Cc: stable <[email protected]>
Signed-off-by: Ekansh Gupta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kunit fixes from Shuah Khan:
"NULL vs IS_ERR() bug fixes, documentation update, MAINTAINERS file
update to add Rae Moar as a reviewer, and a fix to run test suites
only after module initialization completes"
* tag 'linux_kselftest-kunit-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
Documentation: KUnit: Update the instructions on how to test static functions
kunit: run test suites only after module initialization completes
MAINTAINERS: kunit: Add Rae Moar as a reviewer
kunit: device: Fix a NULL vs IS_ERR() check in init()
kunit: Fix a NULL vs IS_ERR() bug
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Three fixes to livepatch, rseq, and seccomp tests"
* tag 'linux_kselftest-fixes-6.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kselftest/seccomp: Report each expectation we assert as a KTAP test
kselftest/seccomp: Use kselftest output functions for benchmark
selftests/livepatch: fix and refactor new dmesg message code
selftests/rseq: Do not skip !allowed_cpus for mm_cid
|
|
The Lenovo Legion Go is a handheld gaming system, similar to a Steam Deck.
It has a gamepad (including rear paddles), 3 gyroscopes, a trackpad,
volume buttons, a power button, and 2 LED ring lights.
The Legion Go firmware presents these controls as a USB hub with various
devices attached. In its default state, the gamepad is presented as an
Xbox controller connected to this hub. (By holding a combination of
buttons, it can be changed to use the older DirectInput API.)
This patch teaches the existing Xbox controller module `xpad` to bind to
the controller in the Legion Go, which enables support for the:
- directional pad,
- analog sticks (including clicks),
- X, Y, A, B,
- start and select (or menu and capture),
- shoulder buttons, and
- rumble.
The trackpad, touchscreen, volume controls, and power button are already
supported via existing kernel modules. Two of the face buttons, the
gyroscopes, rear paddles, and LEDs are not.
After this patch lands, the Legion Go will be mostly functional in Linux,
out-of-the-box. The various components of the USB hub can be synthesized
into a single logical controller (including the additional buttons) in
userspace with [Handheld Daemon](https://github.com/hhd-dev/hhd), which
makes the Go fully functional.
Signed-off-by: Brenton Simpson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
For these hooks the true "neutral" value is -EOPNOTSUPP, which is
currently what is returned when no LSM provides this hook and what LSMs
return when there is no security context set on the socket. Correct the
value in <linux/lsm_hooks.h> and adjust the dispatch functions in
security/security.c to avoid issues when the BPF LSM is enabled.
Cc: [email protected]
Fixes: 98e828a0650f ("security: Refactor declaration of LSM hooks")
Signed-off-by: Ondrej Mosnacek <[email protected]>
[PM: subject line tweak]
Signed-off-by: Paul Moore <[email protected]>
|
|
In an entirely unrelated discussion where I pointed out a stupid thinko
of mine, Rasmus piped up and noted that that obvious mistake already
existed elsewhere in the kernel tree.
An "error pointer" is the negative error value encoded as a pointer,
making the whole "return error or valid pointer" use-case simple and
straightforward. We use it all over the kernel.
But the key here is that errors are _negative_ error numbers, not the
horrid UNIX user-level model of "-1 and the value of 'errno'".
The Apple mailbox driver used the positive error values, and thus just
returned invalid normal pointers instead of actual errors.
Of course, the reason nobody ever noticed is that the errors presumably
never actually happen, so this is fixing a conceptual bug rather than an
actual one.
Reported-by: Rasmus Villemoes <[email protected]>
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The function kvmalloc_node limits the allocation size to INT_MAX. This
limit will be overflowed if dm-writecache attempts to map a device with
1TiB or larger length. This commit changes kvmalloc_array to vmalloc_array
to avoid the limit.
The commit also changes vmalloc(array_size()) to vmalloc_array().
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
The kvmalloc function fails with a warning if the size is larger than
INT_MAX. Linus said that there should be limits that prevent this warning
from being hit. This commit adds the limits to the dm-stats subsystem
in DM core.
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
The kvmalloc function fails with a warning if the size is larger than
INT_MAX. The warning was triggered by a syscall testing robot.
In order to avoid the warning, this commit limits the number of targets to
1048576 and the size of the parameter area to 1073741824.
Signed-off-by: Mikulas Patocka <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
If the external phy working together with phy-omap-usb2 does not implement
send_srp(), we may still attempt to call it. This can happen on an idle
Ethernet gadget triggering a wakeup for example:
configfs-gadget.g1 gadget.0: ECM Suspend
configfs-gadget.g1 gadget.0: Port suspended. Triggering wakeup
...
Unable to handle kernel NULL pointer dereference at virtual address
00000000 when execute
...
PC is at 0x0
LR is at musb_gadget_wakeup+0x1d4/0x254 [musb_hdrc]
...
musb_gadget_wakeup [musb_hdrc] from usb_gadget_wakeup+0x1c/0x3c [udc_core]
usb_gadget_wakeup [udc_core] from eth_start_xmit+0x3b0/0x3d4 [u_ether]
eth_start_xmit [u_ether] from dev_hard_start_xmit+0x94/0x24c
dev_hard_start_xmit from sch_direct_xmit+0x104/0x2e4
sch_direct_xmit from __dev_queue_xmit+0x334/0xd88
__dev_queue_xmit from arp_solicit+0xf0/0x268
arp_solicit from neigh_probe+0x54/0x7c
neigh_probe from __neigh_event_send+0x22c/0x47c
__neigh_event_send from neigh_resolve_output+0x14c/0x1c0
neigh_resolve_output from ip_finish_output2+0x1c8/0x628
ip_finish_output2 from ip_send_skb+0x40/0xd8
ip_send_skb from udp_send_skb+0x124/0x340
udp_send_skb from udp_sendmsg+0x780/0x984
udp_sendmsg from __sys_sendto+0xd8/0x158
__sys_sendto from ret_fast_syscall+0x0/0x58
Let's fix the issue by checking for send_srp() and set_vbus() before
calling them. For USB peripheral only cases these both could be NULL.
Fixes: 657b306a7bdf ("usb: phy: add a new driver for omap usb2 phy")
Signed-off-by: Tony Lindgren <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Vinod Koul <[email protected]>
|