aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-03-19USB: unusual_devs.h: Fix capacity for SL11R-IDE 2.6cOndrej Zary1-0/+9
SL11R-IDE 2.6c (at least) reports wrong capacity (one sector more). Reading that last sector causes the device not to work anymore (and looks like HAL or something does that automatically after plugging in): sd 5:0:0:0: [sdc] Device not ready sd 5:0:0:0: [sdc] Result: hostbyte=0x00 driverbyte=0x08 sd 5:0:0:0: [sdc] Sense Key : 0x2 [current] sd 5:0:0:0: [sdc] ASC=0x0 ASCQ=0x0 sd 5:0:0:0: [sdc] CDB: cdb[0]=0x28: 28 00 04 a8 b5 70 00 00 01 00 Add unusual_devs entry to fix the capacity. Signed-off-by: Ondrej Zary <[email protected]> Signed-off-by: Phil Dibowitz <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: serial: use port endpoint size to determine if ep is availableJohan Hovold1-11/+19
It is possible to have a multi-port device with a port lacking an in or out bulk endpoint. Only checking for num_bulk_in or num_bulk_out is thus not sufficient to determine whether a specific port has an in or out bulk endpoint. This fixes potential null pointer dereferences in the generic open and write routines, as well as access to uninitialised fifo in write_room and chars_in_buffer. Also let write fail with ENODEV (instead of 0) on missing out endpoint (also on zero-length writes). Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: serial: fix softint not being called on errorsJohan Hovold1-10/+5
Make sure usb_serial_port_softint is called on errors also when using multi urb writes. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: serial: fix error message on close in generic driverJohan Hovold1-1/+3
Resubmitting read urb fails with -EPERM if completion handler runs while urb is being killed on close. This should not be reported as an error. Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19USB: fix usbfs regressionAlan Stern1-3/+14
This patch (as1352) fixes a bug in the way isochronous input data is returned to userspace for usbfs transfers. The entire buffer must be copied, not just the first actual_length bytes, because the individual packets will be discontiguous if any of them are short. Reported-by: Markus Rechberger <[email protected]> Signed-off-by: Alan Stern <[email protected]> CC: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19tty_port,usb-console: Fix usb serial console open/close regressionJason Wessel3-1/+3
Commit e1108a63e10d344284011cccc06328b2cd3e5da3 ("usb_serial: Use the shutdown() operation") breaks the ability to use a usb console starting in 2.6.33. This was observed when using console=ttyUSB0,115200 as a boot argument with an FTDI device. The error is: ftdi_sio ttyUSB0: ftdi_submit_read_urb - failed submitting read urb, error -22 The handling of the ASYNCB_INITIALIZED changed in 2.6.32 such that in tty_port_shutdown() it always clears the flag if it is set. The fix is to add a variable to the tty_port struct to indicate when the tty port is a console. CC: Alan Cox <[email protected]> CC: Alan Stern <[email protected]> CC: Oliver Neukum <[email protected]> CC: Andrew Morton <[email protected]> Signed-off-by: Jason Wessel <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19tty: cpm_uart: use resource_size()Tobias Klauser1-2/+2
Use the resource_size function instead of manually calculating the resource size. This reduces the chance of introducing off-by-one errors. Signed-off-by: Tobias Klauser <[email protected]> Cc: Alan Cox <[email protected]> Cc: Kumar Gala <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19tty_buffer: Fix distinct type warningFang Wenqi1-2/+2
CC drivers/char/tty_buffer.o drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_fixed_flag’: drivers/char/tty_buffer.c:251: warning: comparison of distinct pointer types lacks a cast drivers/char/tty_buffer.c: In function ‘tty_insert_flip_string_flags’: drivers/char/tty_buffer.c:288: warning: comparison of distinct pointer types lacks a cast Fix it by replacing min() with min_t() in tty_insert_flip_string_flags and tty_insert_flip_string_fixed_flag(). Signed-off-by: Fang Wenqi <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19hvc_console: Fix race between hvc_close and hvc_removeAmit Shah1-10/+21
Alan pointed out a race in the code where hvc_remove is invoked. The recent virtio_console work is the first user of hvc_remove(). Alan describes it thus: The hvc_console assumes that a close and remove call can't occur at the same time. In addition tty_hangup(tty) is problematic as tty_hangup is asynchronous itself.... So this can happen hvc_close hvc_remove hung up ? - no lock tty = hp->tty unlock lock hp->tty = NULL unlock notify del kref_put the hvc struct close completes tty is destroyed tty_hangup dead tty tty->ops will be NULL NULL->... This patch adds some tty krefs and also converts to using tty_vhangup(). Reported-by: Alan Cox <[email protected]> Signed-off-by: Amit Shah <[email protected]> CC: Alan Cox <[email protected]> CC: [email protected] CC: Rusty Russell <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19uartlite: Fix build on sparc.David Miller1-5/+5
We can get this driver enabled via MFD_TIMBERDALE which only requires GPIO to be on. But the of_address_to_resource() function is only present on powerpc and microblaze, so we have to conditionalize the CONFIG_OF probing bits on that. Signed-off-by: David S. Miller <[email protected]> Acked-by: Grant Likely <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19tty: Take a 256 byte padding into account when buffering below sub-page unitsMel Gorman1-4/+5
The TTY layer takes some care to ensure that only sub-page allocations are made with interrupts disabled. It does this by setting a goal of "TTY_BUFFER_PAGE" to allocate. Unfortunately, while TTY_BUFFER_PAGE takes the size of tty_buffer into account, it fails to account that tty_buffer_find() rounds the buffer size out to the next 256 byte boundary before adding on the size of the tty_buffer. This patch adjusts the TTY_BUFFER_PAGE calculation to take into account the size of the tty_buffer and the padding. Once applied, tty_buffer_alloc() should not require high-order allocations. Signed-off-by: Mel Gorman <[email protected]> Cc: stable <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19Revert "tty: Add a new VT mode which is like VT_PROCESS but doesn't require ↵Greg Kroah-Hartman2-22/+20
a VT_RELDISP ioctl call" This reverts commit eec9fe7d1ab4a0dfac4cb43047a7657fffd0002f. Ari writes as the reason this should be reverted: The problems with this patch include: 1. There's at least one subtlety I overlooked - switching between X servers (i.e. from one X VT to another) still requires the cooperation of both X servers. I was assuming that KMS eliminated this. 2. It hasn't been tested at all (no X server patch exists which uses the new mode). As he was the original author of the patch, I'll revert it. Cc: Ari Entlich <[email protected]> Cc: Alan Cox <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19driver core: numa: fix BUILD_BUG_ON for node_read_distanceDavid Rientjes1-2/+5
node_read_distance() has a BUILD_BUG_ON() to prevent buffer overruns when the number of nodes printed will exceed the buffer length. Each node only needs four chars: three for distance (maximum distance is 255) and one for a seperating space or a trailing newline. Signed-off-by: David Rientjes <[email protected]> Cc: Ingo Molnar <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19driver-core: document ERR_PTR() return valuesJani Nikula3-0/+14
A number of functions in the driver core return ERR_PTR() values on error. Document this in the kernel-doc of the functions. Signed-off-by: Jani Nikula <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19kobject: documentation: Update to refer to kset-example.c.Robert P. J. Day1-1/+2
Signed-off-by: Robert P. J. Day <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19sysdev: the cpu probe/release attributes should be sysdev_class_attributesStephen Rothwell1-8/+8
This fixes these warnings: drivers/base/cpu.c:264: warning: initialization from incompatible pointer type drivers/base/cpu.c:265: warning: initialization from incompatible pointer type Cc: Andi Kleen <[email protected]> Signed-off-by: Stephen Rothwell <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19kobject: documentation: Fix erroneous example in kobject doc.Robert P. J. Day1-19/+38
Replace uio_mem example for kobjects with uio_map, since the uio_mem struct no longer contains a kobject. Signed-off-by: Robert P. J. Day <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19driver-core: fix missing kernel-doc in firmware_classRandy Dunlap1-0/+1
Fix kernel-doc warning in firmware_class.c: Warning(drivers/base/firmware_class.c:94): No description found for parameter 'attr' Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19Driver core: Early platform kernel-doc updateMagnus Damm1-7/+20
This patch updates the kernel-doc notation for early platform functions. Signed-off-by: Magnus Damm <[email protected]> Acked-by: Randy Dunlap <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19sysfs: fix sysfs lockdep warning in mlx4 codeGreg Kroah-Hartman1-0/+1
This fixes a sysfs lockdep warning in the mlx4 code. Cc: Yinghai Lu <[email protected]> Cc: Eric Biederman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19sysfs: fix sysfs lockdep warning in infiniband codeGreg Kroah-Hartman1-0/+1
This fixes a sysfs lockdep warning in the infiniband code. Cc: Yinghai Lu <[email protected]> Cc: Eric Biederman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19sysfs: fix sysfs lockdep warning in ipmi codeGreg Kroah-Hartman1-0/+10
This fixes a sysfs lockdep warning in the ipmi code. Thanks to Eric Biederman and Yinghai Lu for the original versions of the patch, unfortunatly they did not submit them in a form they could be applied in. Cc: Yinghai Lu <[email protected]> Cc: Eric Biederman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19sysfs: Initialised pci bus legacy_mem field before useMel Gorman1-1/+1
PPC64 is failing to boot the latest mmotm due to an uninitialised pointer in pci_create_legacy_files(). The surprise is that machines boot at all and it would appear to affect current mainline as well. This patch fixes the problem. Signed-off-by: Mel Gorman <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19sysfs: use sysfs_bin_attr_init in firmware class driverJiri Kosina1-0/+1
Annotate dynamic sysfs attribute in fw_setup_device(). This gets rid of the following lockdep warning: bnx2 0000:08:00.0: firmware: requesting bnx2/bnx2-mips-06-5.0.0.j6.fw BUG: key ffff880008293470 not in .data! ------------[ cut here ]------------ WARNING: at kernel/lockdep.c:2706 lockdep_init_map+0x562/0x620() Modules linked in: bnx2(+) sg tpm_bios floppy rtc_lib usb_storage i2c_piix4 joydev button container shpchp i2c_core sr_mod cdrom pci_hotplug usbhid hid ohci_hcd ehci_hcd sd_mod usbcore edd ext3 mbcache jbd fan ata_generic sata_svw pata_serverworks libata scsi_mod thermal processor Pid: 1915, comm: work_for_cpu Not tainted 2.6.34-rc1-default #81 Call Trace: [<ffffffff8107c1d2>] ? lockdep_init_map+0x562/0x620 [<ffffffff81049fd8>] warn_slowpath_common+0x78/0xd0 [<ffffffff8104a03f>] warn_slowpath_null+0xf/0x20 [<ffffffff8107c1d2>] lockdep_init_map+0x562/0x620 [<ffffffff8117a236>] ? sysfs_new_dirent+0x76/0x120 [<ffffffff8126edb2>] ? put_device+0x12/0x20 [<ffffffff811797cc>] sysfs_add_file_mode+0x6c/0xd0 [<ffffffff8117983c>] sysfs_add_file+0xc/0x10 [<ffffffff8117bf61>] sysfs_create_bin_file+0x21/0x30 [<ffffffff81279c61>] _request_firmware+0x2f1/0x650 [<ffffffff8127a04e>] request_firmware+0xe/0x10 [<ffffffffa01ec19e>] bnx2_init_one+0x8f5/0x177e [bnx2] [<ffffffff81389eab>] ? _raw_spin_unlock_irq+0x2b/0x40 [<ffffffff81040ed9>] ? finish_task_switch+0x69/0x100 [<ffffffff81040e70>] ? finish_task_switch+0x0/0x100 [<ffffffff81064b40>] ? do_work_for_cpu+0x0/0x30 [<ffffffff811e6302>] local_pci_probe+0x12/0x20 [<ffffffff81064b53>] do_work_for_cpu+0x13/0x30 [<ffffffff81064b40>] ? do_work_for_cpu+0x0/0x30 [<ffffffff81068c56>] kthread+0x96/0xa0 [<ffffffff81003e64>] kernel_thread_helper+0x4/0x10 [<ffffffff8138a350>] ? restore_args+0x0/0x30 [<ffffffff81068bc0>] ? kthread+0x0/0xa0 [<ffffffff81003e60>] ? kernel_thread_helper+0x0/0x10 ---[ end trace a2ecee9c9602d195 ]--- Cc: Eric W. Biederman <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Signed-off-by: Jiri Kosina <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2010-03-19powerpc: Remove IOMMU_VMERGE config optionFUJITA Tomonori2-19/+1
The description says: Cause IO segments sent to a device for DMA to be merged virtually by the IOMMU when they happen to have been allocated contiguously. This doesn't add pressure to the IOMMU allocator. However, some drivers don't support getting large merged segments coming back from *_map_sg(). Most drivers don't have this problem; it is safe to say Y here. It's out of date. Long ago, drivers didn't have a way to tell IOMMUs about their segment length limit (that is, the maximum segment length that they can handle). So IOMMUs merged as many segments as possible and gave too large segments to drivers. dma_get_max_seg_size() was introduced to solve the above problem. Device drives can use the API to tell IOMMU about the maximum segment length that they can handle. In addition, the default limit (64K) should be safe for everyone. So this config option seems to be unnecessary. Note that this config option just enables users to disable the virtual merging by default. Users can still disable the virtual merging by the boot parameter. Signed-off-by: FUJITA Tomonori <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2010-03-19powerpc: Fix swiotlb to respect the boot optionFUJITA Tomonori3-12/+6
powerpc initializes swiotlb before parsing the kernel boot options so swiotlb options (e.g. specifying the swiotlb buffer size) are ignored. Any time before freeing bootmem works for swiotlb so this patch moves powerpc's swiotlb initialization after parsing the kernel boot options, mem_init (as x86 does). Signed-off-by: FUJITA Tomonori <[email protected]> Tested-by: Becky Bruce <[email protected]> Tested-by: Albert Herranz <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2010-03-19powerpc: Do not call prink when CONFIG_PRINTK is not definedMárton Németh1-0/+4
When printk() is disabled (CONFIG_PRINTK) at menu item General setup -> Configure standard kernel features (for small systems) -> Enable support for printk then there should be no printk() calls at all. Signed-off-by: Márton Németh <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2010-03-19powerpc: Use correct ccr bit for syscall error statusNathan Lynch1-3/+3
The powerpc implementations of syscall_get_error and syscall_set_return_value should use CCR0:S0 (0x10000000) for testing and setting syscall error status. Fortunately these APIs don't seem to be used at the moment. Signed-off-by: Nathan Lynch <[email protected]> Signed-off-by: Benjamin Herrenschmidt <[email protected]>
2010-03-19Merge commit 'kumar/merge' into mergeBenjamin Herrenschmidt2-6/+3
2010-03-18smsc95xx: Fix tx checksum offload for small packetsSteve Glendinning1-3/+15
TX checksum offload does not work properly when transmitting UDP packets with 0, 1 or 2 bytes of data. This patch works around the problem by calculating checksums for these packets in the driver. Signed-off-by: Steve Glendinning <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-03-18ixgbe: Fix 82599 KX4 Wake on LAN issue after an improper system shutdownMallikarjuna R Chilakala1-3/+0
Advanced Power Management is disabled for 82599 KX4 connections by clearing GRC.APME bit, causing it to not wake the system from an improper system shutdown. By default GRC.APME is enabled and software is not supposed to clear these settings during adapter probe. Signed-off-by: Mallikarjuna R Chilakala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-03-18ixgbe: Fix 82599 multispeed fiber link issues due to Tx laser flappingMallikarjuna R Chilakala3-36/+54
Fix 82599 link issues during driver load and unload test using multi-speed 10G & 1G fiber modules. When connected back to back sometime 82599 multispeed fiber modules would link at 1G speed instead of 10G highest speed, due to a race condition in autotry process involving Tx laser flapping. Move autotry autoneg-37 tx laser flapping process from multispeed module init setup to driver unload. This will alert the link partner to restart its autotry process when it tries to establish the link with the link partner Signed-off-by: Mallikarjuna R Chilakala <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-03-18Merge branch 'master' of ↵David S. Miller3-22/+4
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-03-18net: Potential null skb->dev dereferenceEric Dumazet3-9/+11
When doing "ifenslave -d bond0 eth0", there is chance to get NULL dereference in netif_receive_skb(), because dev->master suddenly becomes NULL after we tested it. We should use ACCESS_ONCE() to avoid this (or rcu_dereference()) Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-03-18jme: Advance driver version numberGuo-Fu Tseng1-1/+1
Advance driver version number after some bug fix. Signed-off-by: Guo-Fu Tseng <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-03-18jme: Protect vlgrp structure by pause RX actions.Guo-Fu Tseng1-0/+33
Temporary stop the RX IRQ, and disable (sync) tasklet or napi. And restore it after finished the vlgrp pointer assignment. Signed-off-by: Guo-Fu Tseng <[email protected]> Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2010-03-18jme: Fix VLAN memory leakGuo-Fu Tseng1-0/+2
Fix memory leak while receiving 8021q tagged packet which is not registered by user. Signed-off-by: Guo-Fu Tseng <[email protected]> Cc: [email protected] Signed-off-by: David S. Miller <[email protected]>
2010-03-18KS8851: Avoid NULL pointer in set rx modeAbraham Arce1-1/+0
Kernel NULL pointer dereference when setting mode for IFF_MULTICAST. Tested on SDP OMAP4430 board. ks8851 spi1.0: message enable is 0 ks8851 spi1.0: revision 0, MAC f2:f4:2f:56:37:de, IRQ 194 Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = c0004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] PREEMPT SMP last sysfs file: Modules linked in: CPU: 0 Not tainted (2.6.34-rc1-01039-g38d7ed1-dirty #3) PC is at ks8851_set_rx_mode+0x88/0x124 LR is at bitrev32+0x24/0x2c <snip> Backtrace: [<c01bfbd8>] ? (ks8851_set_rx_mode+0x0/0x124) [<c01d4164>] (__dev_set_rx_mode+0x0/0x90) [<c01dc460>] (dev_mc_add+0x0/0x78) [<c021f0bc>] (igmp_group_added+0x0/0x64) [<c021f174>] (ip_mc_inc_group+0x0/0x150) [<c021f3b8>] (ip_mc_up+0x0/0x64) [<c0219eb0>] (inetdev_event+0x0/0x3d4) [<c0066818>] (notifier_call_chain+0x0/0x78) [<c00668b8>] (__raw_notifier_call_chain+0x0/0x24) [<c00668dc>] (raw_notifier_call_chain+0x0/0x28) [<c01d7484>] (call_netdevice_notifiers+0x0/0x24) [<c01d7780>] (__dev_notify_flags+0x0/0x68) [<c01d77e8>] (dev_change_flags+0x0/0x4c) [<c001f0bc>] (ip_auto_config+0x0/0xf1c) [<c0028490>] (do_one_initcall+0x0/0x1bc) [<c00084dc>] (kernel_init+0x0/0x234) Code: e15130bc e1833012 e14130bc e5943000 (e5934000) ---[ end trace ed0fb00a94142792 ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Abraham Arce <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-03-18tcp: Fix OOB POLLIN avoidance.Alexandra Kossovsky1-1/+1
From: [email protected] Fixes kernel bugzilla #15541 Signed-off-by: David S. Miller <[email protected]>
2010-03-18alpha: fix compile errors in dma-mapping-common.hFUJITA Tomonori4-4/+0
The commit c186caca3dbe7f44da624cb4f9d78e1b1dfb13b8 leads to the following errors with CONFIG_ALPHA_{TSUNAMI, TITAN, RAWHIDE, MARVEL}: /home/fujita/git/linux-2.6/include/asm-generic/dma-mapping-common.h: In function `dma_map_sg_attrs': /home/fujita/git/linux-2.6/include/asm-generic/dma-mapping-common.h:49: error: implicit declaration of function `for_each_sg' /home/fujita/git/linux-2.6/include/asm-generic/dma-mapping-common.h:50: error: syntax error before "kmemcheck_mark_initialized" Signed-off-by: FUJITA Tomonori <[email protected]> Reported-by: Michael Cree <[email protected]> Signed-off-by: Matt Turner <[email protected]>
2010-03-18alpha: remove trailing spaces in messagesFrans Pop2-2/+2
Signed-off-by: Frans Pop <[email protected]> Cc: [email protected] Signed-off-by: Matt Turner <[email protected]>
2010-03-18alpha: use __ratelimitAkinobu Mita1-7/+3
Replace open-coded rate limiting logic with __ratelimit(). Signed-off-by: Akinobu Mita <[email protected]> Cc: Richard Henderson <[email protected]> Cc: Ivan Kokshaysky <[email protected]> Cc: [email protected] Signed-off-by: Matt Turner <[email protected]>
2010-03-18Merge branch 'for-linus' of ↵Linus Torvalds112-2273/+12548
git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/vapier/blackfin: (96 commits) Blackfin: stop cleaning include/asm/asm-offsets.h Blackfin: scale calibration when cpu freq changes Blackfin: eat spurious space in asm/dpmc.h Blackfin: fix anomaly 283 handling with exact hardware error Blackfin: bf537-stamp: add example ADXL346 orientation resources Blackfin: bf537-stamp: add example AD2S1210 IIO resources Blackfin: don't support keypad wakeup from hibernate Blackfin: bf537-stamp: add example AD7416 IIO resources Blackfin: bf537-stamp: add example ADP8860 backlight/led resources Blackfin: bf537-stamp: add example AD7414 temp sensor resources Blackfin: rename AD1836 to AD183X in board files Blackfin: bf537-stamp: add example AD2S120x resources Blackfin: add support for the on-chip MAC status interrupts Blackfin: asm/page.h: pull in asm-generic headers Blackfin: mark gpio lib functions static Blackfin: bf537-stamp: add example ADAU1361 resources Blackfin: GPIO: implement to_irq handler Blackfin: bf537-stamp: add example ADP122/ADP150 power regulator resources Blackfin: bf537-stamp: add example AD2S90 resources Blackfin: bf537-stamp: add example AD5398 power regulator resources ...
2010-03-18Merge branch 'merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds10-119/+183
* 'merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/5200: Build fix for mpc52xx watchdog timer code of: Fix comparison of "compatible" properties powerpc/52xx: update defconfigs spi/omap2_mcspi: Use transaction speed if provided spi/omap2_mcspi: fix NULL pointer dereference uartlite: Fix build on sparc.
2010-03-18Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds42-132/+403
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: ARM/OMAP: Remove the +x bit from a couple of source files omap: McBSP: Drop unnecessary status/error bit clearing on reg_cacheretrieved register values OMAP4: fix temporary hacks that break multi-omap PM OMAP2: cpu_is_omap2*: fix compile-time removal of unused code omap3: pandora: add missing i2c3 board_info omap: mach-omap2/io.c: fix function declarations omap: Fix gpio_resume_after_retention omap3: Fix support for the LEDs connected to GPIO outputs on IGEP v2board omap: Checkpatch cleanup for blizzard.h omap: pass the reboot command to the boot loader omap2/3/4: mailbox: remove compiler warning OMAP2: serial.c: Fix number of uarts in early_init omap: Enable PM_RUNTIME in defconfigs to avoid USB compile errors omap2: Update n8x0 defconfig to test multi-omap and DMA api changes omap2: add USB initialization for tusb6010 omap4: Fix build break by moving omap_smc1 into a separate .S omap2/3/4: ehci: avoid compiler error with touchbook omap3: Fix compile for Touch Book early_param
2010-03-18Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds23-134/+403
* master.kernel.org:/home/rmk/linux-2.6-arm: (23 commits) ARM: Fix RiscPC decompressor build errors ARM: Fix sorting of platform group config options and includes ARM: 5991/1: Fix regression in restore_user_regs macro ARM: 5989/1: ARM: KGDB: add support for SMP platforms ARM: 5990/1: ARM: use __armv5tej_mmu_cache_flush for V5TEJ instead of __armv4_mmu_cache_flush ARM: Add final piece to fix XIP decompressor in read-only memory video: enable sh_mobile_lcdc on SH-Mobile ARM ARM: mach-shmobile: ap4evb SDHI0 platform data V2 ARM: mach-shmobile: sh7372 SDHI vector merge ARM: mach-shmobile: sh7377 SDHI vector merge ARM: mach-shmobile: sh7367 SDHI vector merge ARM: mach-shmobile: G4EVM KEYSC platform data mtd: enable sh_flctl on SH-Mobile ARM ARM: mach-shmobile: G3EVM FLCTL platform data ARM: mach-shmobile: G3EVM KEYSC platform data Video: ARM CLCD: Better fix for swapped IENB and CNTL registers ARM: Add L2 cache handling to smp boot support ARM: 5960/1: ARM: perf-events: fix v7 event selection mask ARM: 5959/1: ARM: perf-events: request PMU interrupts with IRQF_NOBALANCING ARM: 5988/1: pgprot_dmacoherent() for non-mmu builds ...
2010-03-18Merge branch 'for-linus/samsung-fixes' of git://git.fluff.org/bjdooks/linuxLinus Torvalds6-5/+38
* 'for-linus/samsung-fixes' of git://git.fluff.org/bjdooks/linux: ARM: SAMSUNG: Fixup commit 4e6d488af37980d224cbf298224db6173673f362 ARM: SAMSUNG: Fix build error from stale define in <plat/uncompress.h> ARM: SAMSUNG: Add suspend/resume support for S3C PWM driver ARM: S3C2440: Fix s3c2440 cpufreq compilation post move.
2010-03-18Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds33-195/+3840
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: (27 commits) microblaze: entry.S use delay slot for return handlers microblaze: Save current task directly microblaze: Simplify entry.S - save/restore r3/r4 - ret_from_trap microblaze: PCI early support for noMMU system microblaze: Fix dma alloc and free coherent dma functions microblaze: Add consistent code microblaze: pgtable.h: move consistent functions microblaze: Remove ancient Kconfig option for consistent mapping microblaze: Remove VMALLOC_VMADDR microblaze: Add define for ASM_LOOP microblaze: Preliminary support for dma drivers microblaze: remove trailing space in messages microblaze: Use generic show_mem() microblaze: Change temp register for cmdline microblaze: Preliminary support for dma drivers microblaze: Move cache function to cache.c microblaze: Add support from PREEMPT microblaze: Add support for Xilinx PCI host bridge microblaze: Enable PCI, missing files microblaze: Add core PCI files ...
2010-03-18Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds5-41/+60
* 'for-linus' of git://neil.brown.name/md: md: deal with merge_bvec_fn in component devices better.
2010-03-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds133-3525/+7204
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (69 commits) [SCSI] scsi_transport_fc: Fix synchronization issue while deleting vport [SCSI] bfa: Update the driver version to 2.1.2.1. [SCSI] bfa: Remove unused header files and did some cleanup. [SCSI] bfa: Handle SCSI IO underrun case. [SCSI] bfa: FCS and include file changes. [SCSI] bfa: Modified the portstats get/clear logic [SCSI] bfa: Replace bfa_get_attr() with specific APIs [SCSI] bfa: New portlog entries for events (FIP/FLOGI/FDISC/LOGO). [SCSI] bfa: Rename pport to fcport in BFA FCS. [SCSI] bfa: IOC fixes, check for IOC down condition. [SCSI] bfa: In MSIX mode, ignore spurious RME interrupts when FCoE ports are in FW mismatch state. [SCSI] bfa: Fix Command Queue (CPE) full condition check and ack CPE interrupt. [SCSI] bfa: IOC recovery fix in fcmode. [SCSI] bfa: AEN and byte alignment fixes. [SCSI] bfa: Introduce a link notification state machine. [SCSI] bfa: Added firmware save clear feature for BFA driver. [SCSI] bfa: FCS authentication related changes. [SCSI] bfa: PCI VPD, FIP and include file changes. [SCSI] bfa: Fix to copy fpma MAC when requested by user space application. [SCSI] bfa: RPORT state machine: direct attach mode fix. ...
Powered by cgit, Gruvboxed by Blaster4385.